2AU6TPROWC-1Wireless Charger

Theragun PRO Wireless Charging Stand Theragun PRO not included with the Wireless Charging Stand Born in Los Angeles, CA. Engineered for everybody. Charging your Theragun PRO 1. Plug the power adapter into the Wireless Charging Stand’s charging port. 2. Turn off your Theragun PRO. 3. Place your Theragun PRO in the cradle of the Wireless Charging Stand and push forward until fully inserted. 4. The LED light of the wireless charging stand will light up when properly connected. The Theragun PRO is fully charged when the battery icon on the device’s OLED screen is full. The Theragun PRO can remain in the Wireless Charging Stand even when fully charged.

Theragun, Inc. Cover Letter-Wireless Charger Approval Date: 2020-3-13 Gentlemen: There’s a Pro-wireless charger / Wireless Charger that would like to have your authorization as an Inductive wireless power transfer applications approval. The specific product as below, Pro-wireless charger / Wireless Charger, with its designed features and specified description, meets special requirements for KDB 680106 D01 section 5.2 requirements. Company: Theragun, Inc. Product Name: Pro-wireless charger; Wireless Charger Model Number: Pro-wireless charger; PRO Wireless Charging Stand FCC ID: 2AU6TPROWC-1 KDB 680106 D01 Section 5.2 Requirements Product Technical Specification Result a) Power transfer frequency is less that 1 MHz123.25kHz-161.3kHz Complied b) Output power from each primary coil is less than or equal to 15 watts. 27 watts incomplied c) The transfer system includes only single primary and secondary coils. This includes charging systems that may have multiple primary coils and clients that are able to detect and allow coupling only between individual pairs of coils Complied d)Client device is placed directly in contact with the transmitter. Complied e) Mobile exposure conditions onlyFor inductive applications where the primary does not physically attach to the client, and it is intended for desktop use, the desktop guidance in KDB 680106 D01 may be applied Complied f)The aggregate H-field strengths at 15 cm surrounding the device and 20 cm above the top surface from all simultaneous transmitting coils are demonstrated to be less than 50% of the MPE limit. Please refer to RF exposure report Complied Sincerely, Print Name: Tony Zhong Title: Program manager Signature: On behalf of Company: Theragun, Inc. Telephone: (086) 15994710928 E-mail: [email protected]

Applicant Declaration Applicant Declaration Rev:0.0 SGS North America Inc. 620 Old Peachtree Road SUITE 100 Suwanee, Georgia 30024 United States Applicant Legal Business Name Theragun, Inc. Address 2803 Colorado Avenue Santa Monica California 90404 United States Grantee Code 2AU6T FCC ID 2AU6TPROWC-1 Authorized Contact Name Tony Zhong Contact Email [email protected] Contact Phone 0086-15994710928 I, the undersigned, certify that I am an authorized signatory for the Applicant and therefore declare; a)in accordance with 47CFR2.911(d), all of the statements herein and the exhibits attached hereto are true and correct to the best of my knowledge and belief. b)in accepting a Grant of Equipment Authorization issued by a TCB, under the authority of the FCC, as a result of the representations made in this application, the Applicant is responsible for: (1) labeling the equipment with the exact FCC ID as specified in this application, (2) compliance statement labeling pursuant to the applicable rules, (3) compliance of the equipment with the applicable technical rules, c)if the Applicant is not the actual manufacturer of the equipment, appropriate arrangements have been made with the manufacturer to ensure that production units of this equipment will continue to comply with the FCC’s technical requirements. d)in accordance with 47 CFR 2.909 and KDB394321, the Applicant has read, understood and agrees to accept that they are the responsible party and agree to abide by their responsibilities as specified under 47 CFR 2.909 and KDB394321. e)in accordance with ISO17065, FCC KDB641163, FCC KDB610077, KDB394321 and RSP-100, the Applicant has read, understood, accepts and agrees to abide by the post market surveillance requirements. (1) the Applicant understands, accepts and agrees that a sample may be requested for surveillance testing. (2) the Applicant shall make provisions to always have a production sample available upon request by SGS, FCC and/or ISED. (3) the Applicant shall, upon request by SGS, at the Applicant’s expense, provide a production sample of the requested product to SGS, FCC and/or ISED as instructed. The sample shall include all support devices, cables, software, accessories or other hardware or software required for evaluation, review, certification and audit surveillance of products certified by SGS. f)neither the Applicant nor any party to the application is subject to a denial of Federal benefits, that includes FCC benefits, pursuant to Section 5301 of the Anti-Drug Abuse Act of 1988, 21 U.S.C. §862 because of a conviction for possession or distribution of a controlled substance. See 47CFR 1.2002(b) for the definition of a “party” for these purposes. g)the Applicant has read, understood, accepts and agrees to abide by the SGS North America, Inc.(TCB) terms and conditions. Link to CFRs: https://www.fcc.gov/wireless/bureau-divisions/technologies-systems-and-innovation-division/rules-regulations-title-47 Link to KDBs: https://apps.fcc.gov/oetcf/kdb/index.cfm Link to RSP-100: https://www.ic.gc.ca/eic/site/smt-gst.nsf/eng/sf01130.html Applicant Signature: Date: 2020-5-25 Print Name: Tony Zhong Title: Program manager *NOTE: This declaration cannot be signed by an Agent, it shall be signed by an authorized person listed in the FCC database

SGS-CSTC Standards Technical Services Co., Ltd. Shenzhen Branch Page: 1 of 6 External Photos for SZEM1912020822CR FCC ID: 2AU6TPROWC-1 SGS-CSTC Standards Technical Services Co., Ltd. Shenzhen Branch Page: 2 of 6 1 EUT Constructional Details SGS-CSTC Standards Technical Services Co., Ltd. Shenzhen Branch Page: 3 of 6 SGS-CSTC Standards Technical Services Co., Ltd. Shenzhen Branch Page: 4 of 6 SGS-CSTC Standards Technical Services Co., Ltd. Shenzhen Branch Page: 5 of 6 SGS-CSTC Standards Technical Services Co., Ltd. Shenzhen Branch Page: 6 of 6

SGS-CSTC Standards Technical Services Co., Ltd. Shenzhen Branch Page: 1 of 6 Internal Photos for SZEM1912020822CR FCC ID: 2AU6TPROWC-1 SGS-CSTC Standards Technical Services Co., Ltd. Shenzhen Branch Page: 2 of 6 1 EUT Constructional Details SGS-CSTC Standards Technical Services Co., Ltd. Shenzhen Branch Page: 3 of 6 SGS-CSTC Standards Technical Services Co., Ltd. Shenzhen Branch Page: 4 of 6 SGS-CSTC Standards Technical Services Co., Ltd. Shenzhen Branch Page: 5 of 6 SGS-CSTC Standards Technical Services Co., Ltd. Shenzhen Branch Page: 6 of 6

SGS-CSTC Standards Technical Services Co., Ltd. Shenzhen Branch Page: 1 of 4 RF Exposure Setup Photos for SZEM1912020822CR FCC ID: 2AU6TPROWC-1 SGS-CSTC Standards Technical Services Co., Ltd. Shenzhen Branch Page: 2 of 4 1 Photographs SGS-CSTC Standards Technical Services Co., Ltd. Shenzhen Branch Page: 3 of 4 SGS-CSTC Standards Technical Services Co., Ltd. Shenzhen Branch Page: 4 of 4

SGS-CSTC Standards Technical Services Co., Ltd. Shenzhen Branch Report No.: SZEM191202082204 Page: 1 of 9 Keny Xu EMC Laboratory Manager 1 COVER PAGE Human Exposure Report Application No.: SZEM1912020822CR Applicant: Theragun, Inc. Address of Applicant: 2803 Colorado Avenue Santa Monica California 90404 United States Manufacturer: Theragun, Inc. Address of Manufacturer: 2803 Colorado Avenue Santa Monica California 90404 United States Factory: Shenzhen Xiang Zhida Technology Co., Ltd. Address of Factory: Room 101, 201, 301, 401, Building C, No.121 of Lianxin Road, Wulian Community, Longgang Street, Longgang District, Shenzhen, P.R.C Equipment Under Test (EUT): EUT Name: Pro-wireless charger; Wireless Charger Model No.: Pro-wireless charger; PRO Wireless Charging Stand ♣ ♣ ♣♣ ♣ Please refer to section 3.1 of this report which indicates which model was actually tested and which were electrically identical. Trade mark: Theragun FCC ID: 2AU6TPROWC-1 Standards: 47 CFR PART 1, Subpart I, Section 1.1310 Date of Receipt: 2019-12-10 Date of Test: 2019-12-10 to 2019-12-23 Date of Issue: 2019-12-27 Test Result : Pass* * In the configuration tested, the EUT complied with the standards specified above SGS-CSTC Standards Technical Services Co., Ltd. Shenzhen Branch Report No.: SZEM191202082204 Page: 2 of 9 Revision Record Version Chapter Date Modifier Remark 01 2019-12-27 Original Authorized for issue by: Bill Chen /Project Engineer Eric Fu /Reviewer SGS-CSTC Standards Technical Services Co., Ltd. Shenzhen Branch Report No.: SZEM191202082204 Page: 3 of 9 2 Contents 1 COVER PAGE ..................................................................................................................................... 1 2 CONTENTS ......................................................................................................................................... 3 3 GENERAL INFORMATION .................................................................................................................. 4 3.1 DETAILS OF E.U.T. ............................................................................................................................. 4 3.2 DESCRIPTION OF SUPPORT UNITS ........................................................................................................ 4 3.3 TEST LOCATION ................................................................................................................................. 5 3.4 TEST FACILITY.................................................................................................................................... 5 3.5 DEVIATION FROM STANDARDS .............................................................................................................. 5 3.6 ABNORMALITIES FROM STANDARD CONDITIONS...................................................................................... 5 4 EQUIPMENTS USED DURING TEST .................................................................................................. 6 5 TEST RESULTS .................................................................................................................................. 7 5.1 RF EXPOSURE TEST ........................................................................................................................... 7 5.1.1 E.U.T. Operation ...................................................................................................................... 7 6 PHOTOGRAPHS- RF EXPOSURE SETUP ......................................................................................... 9 SGS-CSTC Standards Technical Services Co., Ltd. Shenzhen Branch Report No.: SZEM191202082204 Page: 4 of 9 3 General Information 3.1 Details of E.U.T. Power Supply: AC Adapter： Model:EA1046SAR Input:AC 100-240V 1.5A 50/60Hz Output:DC 20V 2.25A Wireless Output:27W Cable: DC cable:95cm unshielded Antenna Type: Loop Antenna Modulation Type: Load Modulation Operation Frequency: 123.25kHz to 161.3kHz Antenna Gain: 0dBi Declaration of EUT Family Grouping: Model No.: Pro-wireless charger; PRO Wireless Charging Stand Only the model Pro-wireless charger was tested, since the electrical circuit design, layout, components used, internal wiring and functions were identical for the above models, with only difference on product name and model name, plastics size 3.2 Description of Support Units Description Manufacturer Model No. Serial No. Hand Held Massager Theragun, Inc. Theragun Pro N/A SGS-CSTC Standards Technical Services Co., Ltd. Shenzhen Branch Report No.: SZEM191202082204 Page: 5 of 9 3.3 Test Location All tests were performed at: SGS-CSTC Standards Technical Services Co., Ltd., Shenzhen Branch E&E Lab, No. 1 Workshop, M-10, Middle section, Science & Technology Park, Shenzhen, Guangdong,China 518057. Tel: +86 755 2601 2053 Fax: +86 755 2671 0594 No tests were sub-contracted. 3.4 Test Facility The test facility is recognized, certified, or accredited by the following organizations: • A2LA (Certificate No. 3816.01) SGS-CSTC Standards Technical Services Co., Ltd., Shenzhen EMC Laboratory is accredited by the American Association for Laboratory Accreditation(A2LA). Certificate No. 3816.01. • VCCI The 3m Fully-anechoic chamber for above 1GHz, 10m Semi-anechoic chamber for below 1GHz, Shielded Room for Mains Port Conducted Interference Measurement and Telecommunication Port Conducted Interference Measurement of SGS-CSTC Standards Technical Services Co., Ltd. have been registered in accordance with the Regulations for Voluntary Control Measures with Registration No.: G-20026, R-14188, C-12383 and T-11153 respectively. • FCC –Designation Number: CN1178 SGS-CSTC Standards Technical Services Co., Ltd., Shenzhen EMC Laboratory has been recognized as an accredited testing laboratory. Designation Number: CN1178. Test Firm Registration Number: 406779. • Innovation, Science and Economic Development Canada SGS-CSTC Standards Technical Services Co., Ltd., Shenzhen EMC Laboratory has been recognized by IS…

Text truncated - open the document above for the full version.

SGS-CSTC Standards Technical Services Co., Ltd. Shenzhen Branch Report No.: SZEM191202082203 Page: 1 of 28 Keny Xu EMC Laboratory Manager TEST REPORT Application No.: SZEM1912020822CR Applicant: Theragun, Inc. Address of Applicant: 2803 Colorado Avenue Santa Monica California 90404 United States Manufacturer: Theragun, Inc. Address of Manufacturer: 2803 Colorado Avenue Santa Monica California 90404 United States Factory: Shenzhen Xiang Zhida Technology Co., Ltd. Address of Factory: Room 101, 201, 301, 401, Building C, No.121 of Lianxin Road, Wulian Community, Longgang Street, Longgang District, Shenzhen, P.R.C Equipment Under Test (EUT): EUT Name: Pro-wireless charger; Wireless Charger Model No.: Pro-wireless charger; PRO Wireless Charging Stand ♣ ♣ Please refer to section 2 of this report which indicates which model was actually tested and which were electrically identical. Trade mark: Theragun FCC ID: 2AU6TPROWC-1 Standard(s) : 47 CFR Part 15, Subpart C Date of Receipt: 2019-12-10 Date of Test: 2019-12-10 to 2019-12-23 Date of Issue: 2019-12-27 Test Result: Pass* * In the configuration tested, the EUT complied with the standards specified above. SGS-CSTC Standards Technical Services Co., Ltd. Shenzhen Branch Report No.: SZEM191202082203 Page: 2 of 28 Revision Record Version Chapter Date Modifier Remark 01 2019-12-27 Original Authorized for issue by: Bill Chen /Project Engineer Eric Fu /Reviewer SGS-CSTC Standards Technical Services Co., Ltd. Shenzhen Branch Report No.: SZEM191202082203 Page: 3 of 28 2 Test Summary Radio Spectrum Technical Requirement Item Standard Method Requirement Result Antenna Requirement 47 CFR Part 15, Subpart C N/A 47 CFR Part 15, Subpart C 15.203 Pass Radio Spectrum Matter Part Item Standard Method Requirement Result Conducted Emissions at AC Power Line (150kHz-30MHz) 47 CFR Part 15, Subpart C ANSI C63.10 (2013) Section 6.2 47 CFR Part 15, Subpart C 15.207 Pass 20dB Bandwidth 47 CFR Part 15, Subpart C ANSI C63.10 (2013) Section 6.9.2 47 CFR Part 15, Subpart C 15.215 Pass Restricted Bands 47 CFR Part 15, Subpart C ANSI C63.10 (2013) Section 6.10.5 47 CFR Part 15, Subpart C 15.205 Pass Radiated Emissions (9kHz-30MHz) 47 CFR Part 15, Subpart C ANSI C63.10 (2013) Section 6.4 47 CFR Part 15, Subpart C 15.205 & 15.209 Pass Radiated Emissions (30MHz-1GHz) 47 CFR Part 15, Subpart C ANSI C63.10 (2013) Section 6.5 47 CFR Part 15, Subpart C 15.205 & 15.209 Pass Declaration of EUT Family Grouping: Model No.: Pro-wireless charger; PRO Wireless Charging Stand Only the model Pro-wireless charger was tested, since the electrical circuit design, layout, components used, internal wiring and functions were identical for the above models, with only difference on product name and model name, plastics size SGS-CSTC Standards Technical Services Co., Ltd. Shenzhen Branch Report No.: SZEM191202082203 Page: 4 of 28 3 Contents Page 1 COVER PAGE ..................................................................................................................................... 1 2 TEST SUMMARY ................................................................................................................................. 3 3 CONTENTS ......................................................................................................................................... 4 4 GENERAL INFORMATION .................................................................................................................. 5 4.1 DETAILS OF E.U.T. ......................................................................................................................... 5 4.2 DESCRIPTION OF SUPPORT UNITS .................................................................................................... 5 4.3 MEASUREMENT UNCERTAINTY ......................................................................................................... 5 4.4 TEST LOCATION ............................................................................................................................. 6 4.5 TEST FACILITY ............................................................................................................................... 6 4.6 DEVIATION FROM STANDARDS ......................................................................................................... 6 4.7 ABNORMALITIES FROM STANDARD CONDITIONS ................................................................................. 6 5 EQUIPMENT LIST ............................................................................................................................... 7 6 RADIO SPECTRUM TECHNICAL REQUIREMENT ............................................................................10 6.1 ANTENNA REQUIREMENT ................................................................................................................10 6.1.1 Test Requirement: ..................................................................................................................10 6.1.2 Conclusion ..............................................................................................................................10 7 RADIO SPECTRUM MATTER TEST RESULTS .................................................................................11 7.1 CONDUCTED EMISSIONS AT AC POW ER LINE (150KHZ-30MHZ) ........................................................11 7.1.1 E.U.T. Operation .....................................................................................................................12 7.1.2 Test Setup Diagram ................................................................................................................12 7.1.3 Measurement Procedure and Data .........................................................................................12 7.2 20DB BANDW IDTH .........................................................................................................................15 7.2.1 E.U.T. Operation ...............................................…

Text truncated - open the document above for the full version.

SGS-CSTC Standards Technical Services Co., Ltd. Shenzhen Branch Page: 1 of 3 Setup Photos for SZEM1912020822CR FCC ID: 2AU6TPROWC-1 SGS-CSTC Standards Technical Services Co., Ltd. Shenzhen Branch Page: 2 of 3 1 Photographs 1.1 Conducted Emissions at AC Power Line (150kHz-30MHz) Test Setup 1.2 Radiated Emissions (9kHz-30MHz) Test Setup SGS-CSTC Standards Technical Services Co., Ltd. Shenzhen Branch Page: 3 of 3 1.3 Radiated Emissions (30MHz-1GHz) Test Setup