2AU6TWAVE-02Massager (Wave Duo)

ENGLISH WARNINGS The Wave Duo TM is intended for commercial or home use. We strive to make the Wave Duo as safe as possible. This is an advanced mechanical device with electric components. If the Wave Duo and its accessories are not used or maintained properly, there is a risk of fire, electric shock, or injury. Do not use the Wave Duo on your head or near your genitals. Do not use the Wave Duo above the waist during pregnancy. Do not get hair caught in any moving part of the Wave Duo. Do not use the Wave Duo above your Adam’s apple or C4. Do not get the Wave Duo wet. Only clean the Wave Duo with a magic eraser or a lightly damp towel. Do not block the vents of the motor. Never attempt to disassemble the Wave Duo. Never store the Wave Duo at temperatures above 40°C/104°F. Only charge the Wave Duo when the ambient temperature is between 0°C/32°F and 40°C/104°F. Never expose the Wave Duo to water. For long-term storage, the Wave Duo should be fully charged. This product is not intended to diagnose, treat, or prevent any diseases. BEFORE USING OR CHARGING THE Wave Duo, READ ALL THE INSTRUCTIONS AND CAUTIONARY MARKINGS IN THIS MANUAL AND ON THE Wave Duo. When using the Wave Duo, these basic precautions should always be followed including: 1. USE ONLY AS INSTRUCTED. Use the Wave Duo as described in this Wave Duo Instruction Manual. Do not carry out any maintenance other than what is shown in the Wave Duo Instruction Manual or advised by Therabody. 2. NOT FOR CHILDREN. The Wave Duo is not intended for use by young children or persons with reduced physical, sensory or reasoning capabilities, or lack of experience and knowledge, unless they have been given supervision or instruction by a responsible person. Do not allow the Wave Duo to be used as a toy. Close attention is necessary when used by or near children. Children should be supervised to ensure that they do not play with the Wave Duo. 3. REDUCING RISK OF INJURY. Charge the Wave Duo by plugging cable included in the package on your USB AC adapter of choice. Wave Duo can also be charged with a regular USB-C charger certified by a competent body. Do not use an AC adapter that is not certified or that has received a sharp blow, been dropped, or damaged in any way. 4. CHARGING LOCATIONS. The Wave Duo should be charged indoors in a well ventilated, dry location. Do not charge the Wave Duo outdoors, in a bathroom or within 10 feet (3.1 meters) of a bathtub, or pool. Do not use the Wave Duo on wet surfaces and do not expose the device to moisture, rain, or snow. Do not use the Wave Duo in the presence of explosive atmospheres (gaseous fumes, dust, or flammable materials). Sparks may be generated, possibly causing a fire. 5. DO NOT OVERCHARGE. Do not leave the Wave Duo connected to the adapter for more than an hour after the Wave Duo has been fully charged. The Wave Duo includes a protection system to avoid the risk of overcharging. However, overcharging the Wave Duo may reduce its life over time. 6. DO NOT BURN OR INCINERATE THE WAVE DUO. The internal battery may explode, causing personal injury or damage. Toxic fumes and materials are created when battery is burned. 7. DO NOT CRUSH, DROP, OR DAMAGE THE WAVE DUO CHARGING CABLE. Do not use a charging cable that has received a sharp blow, been dropped, run over, or damaged in any way. 8. BATTERY CHEMICALS CAUSE SERIOUS BURNS. Never allow the internal battery to come into contact with the skin, eyes, or mouth. If a damaged battery leaks chemicals, use rubber or neoprene gloves to dispose of it. If skin is exposed to battery fluids, wash with soap and water then rinse with vinegar. If eyes are exposed to battery chemicals, immediately rinse with water for 20 minutes and seek medical attention. Remove and dispose of contaminated clothing. 9. DO NOT OPERATE UNDER BLANKET AND PILLOW. Excessive heating can occur and cause fire, electric shock, or injury to persons. 10. STORING THE WAVE DUO. Store in a cool, dry place. Do not store the Wave Duo where temperatures may exceed 40°C/104°F such as in direct sunlight, in a vehicle, or metal building during the summer. 11. DISPOSING OF BATTERIES. The internal Theragun lithium-ion batteries for the Wave Duo are more environmentally friendly than some other types of batteries (e.g, nickel-cadmium). Always dispose of the Wave Duo according to government, regional, and local regulations. Contact a recycling agency in your area for recycling locations. Even discharged batteries contain some energy. Before disposing, use electrical tape to cover the Wave Duo’s 12V connector to prevent the battery from shorting, which could cause a fire or explosion. 12. DO NOT DISASSEMBLE. Disassembly or incorrect reassembly may result in the risk of electric shock, fire, or exposure to battery chemicals. The warranty will be void if the Wave Duo is disassembled or if any parts have been removed. 13. SERVICE. If the Wave Duo is not working properly, has received a sharp blow, has been dropped, damaged, left outdoors, or dropped into water, do not use and contact Therabody by emailing [email protected] for repair or service. Do not attempt to repair or disassemble the Wave Duo, which may result in an electric shock or fire. 14. DO NOT USE WHILE BATHING OR IN THE SHOWER, TUB, OR SINK. Do not place or store the Wave Duo where it can fall or be pulled into a tub or sink. Do not place in or drop into water or other liquid. Do not reach for an appliance that has fallen into water. Unplug immediately. 15. THERMAL LIMITER. The Wave Duo employs an automatic reset thermal limiter that shuts off the Wave Duo to prevent overheating and fire. This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. Changes or modifications not expressly approved by the party responsible for complia…

Text truncated - open the document above for the full version.

User Manual Wave Duo™ USB-C charging port LED battery indicator light LED speed indicator See Warnings insert for important safety instructions Smart Vibrating Roller from the makers of Theragun. Using the Wave Duo 1. To turn on the Wave Duo, firmly press and hold the power button for 1-2 seconds. 2. Press the main button to increase speeds. After the highest speed, if the button is pressed again the Wave Duo will come back to the lowest speed. 3. Place the device under the treatment area gradually applying light to moderate pressure as needed. 4. To turn off the Wave Duo, firmly press and hold the power button until the device turns off. Your Wave Duo is a smart device enabled with Bluetooth connectivity, designed to pair seamlessly with the Therabody app. When you download the app, you’ll be guided through a step-by-step setup and shown how to pair your device. Smart Features Scan the QR code to get started. Charging the Wave Duo 1. The Wave Duo is USB-C enabled. Plug the cable into your USB adapter of choice for charging. The Wave Duo is fast charging enabled and can be charged directly through a USB-C charger (sold separately) for a faster charging experience. 2. The LED light on the power button will flash until fully charged. 3. Charging is complete when the LED light on the power button is solid green. 4. Battery level is continuously displayed on the LED light of the power button when the device is on. To view battery level when the device is off, briefly press the power button and the LED battery light will flash to indicate the battery level. Avoid applying alcohol-based cleaner. Born in Los Angeles, CA. Designed for everybody. @Therabody

ApplicantDeclaration ApplicantDeclaration Rev:0.0 SGSNorthAmericaInc. 620OldPeachtreeRoad SUITE100 Suwanee,Georgia30024 UnitedStates ApplicantLegalBusinessName Theragun,Inc. Address 2803ColoradoAvenue,SantaMonica,California90404,UnitedStates GranteeCode 2AU6T FCCID 2AU6TWAVE-02 AuthorizedContactName FelixChen ContactEmail [email protected] ContactPhone 13823630081 I,theundersigned,certifythatIamanauthorizedsignatoryfortheApplicantandthereforedeclare; a)inaccordancewith47CFR2.911(d),allofthestatementshereinandtheexhibitsattachedheretoaretrueandcorrecttothebestofmy knowledgeandbelief. b)inacceptingaGrantofEquipmentAuthorizationissuedbyaTCB,undertheauthorityoftheFCC,asaresultoftherepresentationsmadein thisapplication,theApplicantisresponsiblefor: (1)labelingtheequipmentwiththeexactFCCIDasspecifiedinthisapplication, (2)compliancestatementlabelingpursuanttotheapplicablerules, (3)complianceoftheequipmentwiththeapplicabletechnicalrules, c)iftheApplicantisnottheactualmanufactureroftheequipment,appropriatearrangementshavebeenmadewiththemanufacturertoensure thatproductionunitsofthisequipmentwillcontinuetocomplywiththeFCC’stechnicalrequirements. d)inaccordancewith47CFR2.909andKDB394321,theApplicanthasread,understoodandagreestoacceptthattheyaretheresponsible partyandagreetoabidebytheirresponsibilitiesasspecifiedunder47CFR2.909andKDB394321. e)inaccordancewithISO17065,FCCKDB641163,FCCKDB610077,KDB394321andRSP-100,theApplicanthasread,understood,accepts andagreestoabidebythepostmarketsurveillancerequirements. (1)theApplicantunderstands,acceptsandagreesthatasamplemayberequestedforsurveillancetesting. (2)theApplicantshallmakeprovisionstoalwayshaveaproductionsampleavailableuponrequestbySGS,FCCand/orISED. (3)theApplicantshall,uponrequestbySGS,attheApplicant’sexpense,provideaproductionsampleoftherequestedproducttoSGS, FCCand/orISEDasinstructed.Thesampleshallincludeallsupportdevices,cables,software,accessoriesorotherhardwareor softwarerequiredforevaluation,review,certificationandauditsurveillanceofproductscertifiedbySGS. f)neithertheApplicantnoranypartytotheapplicationissubjecttoadenialofFederalbenefits,thatincludesFCCbenefits,pursuanttoSection 5301oftheAnti-DrugAbuseActof1988,21U.S.C.§862becauseofaconvictionforpossessionordistributionofacontrolledsubstance.See 47CFR1.2002(b)forthedefinitionofa“party”forthesepurposes. g)theApplicanthasread,understood,acceptsandagreestoabidebytheSGSNorthAmerica,Inc.(TCB)termsandconditions. LinktoCFRs:https://www.fcc.gov/wireless/bureau-divisions/technologies-systems-and-innovation-division/rules-regulations-title-47 LinktoKDBs:https://apps.fcc.gov/oetcf/kdb/index.cfm LinktoRSP-100:https://www.ic.gc.ca/eic/site/smt-gst.nsf/eng/sf01130.html ApplicantSignature: Date: 11-04,2020 PrintName:FelixChen Title:ComplianceandQualityManager *NOTE:ThisdeclarationcannotbesignedbyanAgent,itshallbesignedbyanauthorizedpersonlistedintheFCCdatabase

Theragun, In c. Date :2020-09-22 TO: Federal Communicati on Commission Equipment Authorizati on Branch 7435 Oakland Mills Road Columbia, MID 21046 Regarding: Confidenti ality Request regarding applicati on fo rFCC ID : 2AU6TWAVE- 02 LONG TERM CONFID ENTIA LIT Y Pursuant to 47 CFR Secti on 0.4 59 and 0.4 57 of th e commission’s rules, th e applicant hereby request confidenti al tr eatm ent of th e documents liste d below, associate d with th e certi ficati on applicati on referenced above. Schemati c(s) Block Diagrams Operati onal Descripti ons The documents above conta in proprietary informati on not released to th e public. Public disclosure of th is informati on may prove harmful to th e business of th e applicant. SHORT TERM CONFID ENTIA LIT Y Additi onally, th e applicant requests th e fo llowing documents be held confidenti al unti l th e device is markete d or180days fr om th e grant date , whichever is less. If th e device is markete d with in aforementi oned days of th e Grant Date , th e applicant will noti fy th e TCB per FCC KDB 726920 D01 Confidenti ality Request Procedures. Exte rnal Photo s In te rnal Photo s Test Setup Photo s User manual(s) Sincerely, Print Name: Felix Che nTi tle: Com pl ianc e Mana ge r Signa tur e: On be ha lf of Com pa ny : The ragun, Inc. Te lephone : 0086- 13823630081 E- mail: felix.c he n@t he rabody cor p.c om

Theragun, Inc. Date:2020-09-22 TO: Federal Communication Commission Equipment Authorization Branch 7435 Oakland Mills Road Columbia, MID 21046 Regarding:FCC ID:2AU6TWAVE-02 To whom it may concern: We, the undersigned, hereby authorize SGS-CSTC Standards Technical Services Co., Ltd. (SGS) Shenzhen Branchand Keny Xu in SGS-CSTC Standards Technical Services Co., Ltd. (SGS) Shenzhen Branchto act on our behalf in all manners relating to application for equipment authorization with respect to the FCC ID above, including signing of all documents relating to these matters. Any and all acts carried out by the agent on our behalf shall have the same effect as acts of our own. We, the undersigned, hereby certify that we are not subject to a denial of federal benefits, that includes FCC benefits, pursuant to Section 5301 of the Anti-Drug Abuse Act of 1988, 21 U.S.C. 853(a). Where our agent signs the application for certification on our behalf, I acknowledge that all responsibility for complying with the terms and conditions for Certification, as specified by SGS North America, Inc., still resides withTheragun, Inc. This authorization is valid until further written notice from the applicant. Print Name: Felix ChenTitle: Compliance Manager Signature: On behalf of Company: Theragun, Inc. Telephone: 0086-13823630081 E-mail: [email protected]

SGS-CSTC Standards Technical Services Co., Ltd. Shenzhen Branch Page: 1 of 5 External Photos for SZEM2009009318CR FCC ID: 2AU6TWAVE-02 SGS-CSTC Standards Technical Services Co., Ltd. Shenzhen Branch Page: 2 of 5 1 EUT Constructional Details SGS-CSTC Standards Technical Services Co., Ltd. Shenzhen Branch Page: 3 of 5 SGS-CSTC Standards Technical Services Co., Ltd. Shenzhen Branch Page: 4 of 5 SGS-CSTC Standards Technical Services Co., Ltd. Shenzhen Branch Page: 5 of 5

At the bottom of the product

SGS-CSTC Standards Technical Services Co., Ltd. Shenzhen Branch Page: 1 of 5 Internal Photos for SZEM2009009318CR FCC ID: 2AU6TWAVE-02 SGS-CSTC Standards Technical Services Co., Ltd. Shenzhen Branch Page: 2 of 5 1 EUT Constructional Details SGS-CSTC Standards Technical Services Co., Ltd. Shenzhen Branch Page: 3 of 5 SGS-CSTC Standards Technical Services Co., Ltd. Shenzhen Branch Page: 4 of 5 ANTENNA SGS-CSTC Standards Technical Services Co., Ltd. Shenzhen Branch Page: 5 of 5

SGS-CSTC Standards Technical Services Co., Ltd. Shenzhen Branch Report No.: SZEM200900931803 Page: 1 of 6 Keny Xu EMC Laboratory Manager 1 Cover page SAR Evaluation Report Application No.: SZEM2009009318CR Applicant: Theragun, Inc. Address of Applicant: 2803 Colorado Ave., Santa Monica, California 90404, USA Manufacturer: Theragun, Inc. Address of Manufacturer: 2803 Colorado Ave., Santa Monica, California 90404, USA Factory: Shenzhen Xiang Zhida Technology Co., Ltd Address of Factory: Room 101, 201, 301, 401, Building C, No.121 of Lianxin Road, Wulian Community, Longgang Street, Longgang District, Shenzhen, P.R.C Equipment Under Test (EUT): EUT Name: Massager (Wave Duo) Model No.: Wave Duo Trade Mark: Theragun FCC ID: 2AU6TWAVE-02 Standards: 47 CFR Part 1.1307 47 CFR Part 2.1093 KDB447498D01 General RF Exposure Guidance v06 Date of Receipt: 2020-09-16 Date of Test: 2020-09-17 to 2020-10-29 Date of Issue: 2020-10-29 Test Result : PASS* * In the configuration tested, the EUT complied with the standards specified above. SGS-CSTC Standards Technical Services Co., Ltd. Shenzhen Branch Report No.: SZEM200900931803 Page: 2 of 6 2 Version Revision Record Version Chapter Date Modifier Remark 01 2020-10-29 Original Authorized for issue by: Peter Geng/Project Engineer Eric Fu/Reviewer SGS-CSTC Standards Technical Services Co., Ltd. Shenzhen Branch Report No.: SZEM200900931803 Page: 3 of 6 3 Contents Page 1 COVER PAGE ........................................................................................................................................ 1 2 VERSION ................................................................................................................................................ 2 3 CONTENTS ............................................................................................................................................ 3 4 GENERAL INFORMATION ..................................................................................................................... 4 4.1 GENERAL DESCRIPTION OF EUT ......................................................................................................... 4 4.2 TEST LOCATION ................................................................................................................................ 5 4.3 TEST FACILITY .................................................................................................................................. 5 4.4 DEVIATION FROM STANDARDS ............................................................................................................ 5 4.5 ABNORMALITIES FROM STANDARD CONDITIONS .................................................................................... 5 4.6 OTHER INFORMATION REQUESTED BY THE CUSTOMER .......................................................................... 5 5 SAR EVALUATION ................................................................................................................................. 6 5.1 RF EXPOSURE COMPLIANCE REQUIREMENT ........................................................................................ 6 5.1.1 Standard Requirement ................................................................................................................ 6 5.1.2 Limits .......................................................................................................................................... 6 5.1.3 EUT RF Exposure ....................................................................................................................... 6 SGS-CSTC Standards Technical Services Co., Ltd. Shenzhen Branch Report No.: SZEM200900931803 Page: 4 of 6 4 General Information 4.1 General Description of EUT Battery: DC 11.1V, 1950mAh Operation Frequency: 2402MHz to 2480MHz Bluetooth Version: V5.0 Modulation Type: GFSK Number of Channels: 40 Channel Spacing: 2MHz Antenna Type: Integral antenna Antenna Gain: -3 dBi SGS-CSTC Standards Technical Services Co., Ltd. Shenzhen Branch Report No.: SZEM200900931803 Page: 5 of 6 4.2 Test Location All tests were performed at: SGS-CSTC Standards Technical Services Co., Ltd. Shenzhen Branch No. 1 Workshop, M-10, Middle section, Science & Technology Park, Shenzhen, Guangdong, China 518057 Telephone: +86 (0) 755 2601 2053 Fax: +86 (0) 755 2671 0594 No tests were sub-contracted. 4.3 Test Facility The test facility is recognized, certified, or accredited by the following organizations: • A2LA (Certificate No. 3816.01) SGS-CSTC Standards Technical Services Co., Ltd., Shenzhen EMC Laboratory is accredited by the American Association for Laboratory Accreditation(A2LA). Certificate No. 3816.01. • VCCI The 3m Fully-anechoic chamber for above 1GHz, 10m Semi-anechoic chamber for below 1GHz, Shielded Room for Mains Port Conducted Interference Measurement and Telecommunication Port Conducted Interference Measurement of SGS-CSTC Standards Technical Services Co., Ltd. have been registered in accordance with the Regulations for Voluntary Control Measures with Registration No.: G-20026, R-14188, C-12383 and T-11153 respectively. • FCC –Designation Number: CN1178 SGS-CSTC Standards Technical Services Co., Ltd., Shenzhen EMC Laboratory has been recognized as an accredited testing laboratory. Designation Number: CN1178. Test Firm Registration Number: 406779. • Innovation, Science and Economic Development Canada SGS-CSTC Standards Technical Services Co., Ltd., Shenzhen EMC Laboratory has been recognized by ISED as an accredited testing laboratory. CAB identifier: CN0006. IC#: 4620C. 4.4 Deviation from Standards None. 4.5 Abnormalities from Standard Conditions None. 4.6 Other Information Requested by the Customer None. SGS-CSTC Standards Technical Services Co., Ltd. Shenzhen Branch Report No.: SZEM200900931803 Page: 6 of 6 5 SAR Evaluation 5.1 RF Exposure Compliance Requirement 5.1.1 Standard Requirement According to KDB447498D01 General RF Exposure Guidance v06 4.3.1. Standalone SAR test exclusion considerations Un…

Text truncated - open the document above for the full version.

SGS-CSTC Standards Technical Services Co., Ltd. Shenzhen Branch Page: 1 of 2 Setup Photos for SZEM2009009318CR FCC ID: 2AU6TWAVE-02 SGS-CSTC Standards Technical Services Co., Ltd. Shenzhen Branch Page: 2 of 2 1 Photographs Radiated Spurious Emissions