2AUIUWYZECGSWyze Cam OG, Wyze Cam OG Telephoto 3x

Recor d Full-Length Videos Get unlimited full-length video recor dings. Smart A.I. Detection Detect people, packages, vehicles, and more. Back-to-Back Event Recor ding Capture everyt hing without 5-minute gaps. Exclu siv e Discounts Get exclu siv e discounts on Wyze products. Subscribe or learn more at services.wyze.com. GET BETTER SECURITY WITH FRONT IN THE BOX Indoor Power Adapter × 1 Wall Anchors × 2 Mounting Scr ew × 2 Quick Star t Guide × 1 Wyze Cam OG × 1 USB Cable × 1 Wall Plate × 1 1 White LED Light Lens Microphone Status Light 1 2 3 4 2 3 2 4 5 Speaker Power Cable MicroSD Car d Slot (MicroSD Card not included) Wall Plate SETUP But ton 5 6 7 8 9 7 9 8 SIDEBACK 6 Any changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate this equipment. This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) This device must accept any interference received, including interference that may cause undesired operation. This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures: FCC WARNING: LIGHT INDICATORS DURING INSTALLATION Solid red light The device is powered on and initializing The device is working properly Solid blue light Flashing red light The device is ready to connect Flashing red & blue lights Connection is in progress Flashing blue light The device is connected and finishing setup 2 Connect the camera to a power outlet and wait for 20 seconds or until the status light flashes red. 1 Download the Wyze app and sign in or create an account. 3 Press and release the SETUP button, then wait 3-5 seconds until there is a voice prompt. SETUP Open the Wyze app and tap the + sign in the top left corner of the Home tab. Tap Add Device > Cameras > Wyze Cam OG and then follow the instructions. 4 LIGHT INDICATORS AFTER SETUP Solid red light Live stream is being viewed or a recording is in progress The device is working properly and no operations are running Solid blue light Quickly flashing red light Siren is in use Only use the power supply provided. Cet appareil est conforme aux limites d'exposition de rayonnement RF ISEDC établies pour un environement non contrôlé. Cet émetteur ne doit pas être co-implanté ou fonctionner en conjonction avec toute autre antenne ou transmetteur. Cet équipement doit être installé et utilisé avec une distance minimale de 20 cm entre le radiateur & votre corps. Tous changements ou modifications non expressément approuvés par la partie responsable de la conformité peut annuler l'autorité de l'utilisateur à opérer l'équipement. Le présent appareil est conforme aux CNR d'ISEDC applicables aux appareils radio exempts de licence. L'exploitation est autorisée aux deux conditions suivantes: (1) l'appareil ne doit pas produire de interférence, et (2) l'appareil doit accepter toute interférence radioélectrique subie, même si l'interférence est susceptible d'en compromettre le fonctionnement. This equipment complies with ISEDC RF radiation exposure limits set forth for an uncontrolled environment. This transmitter must not be co-located or operating in conjunction with any other antenna or transmitter. This equipment should be installed and operated with a minimum distance of 20 cm between the radiator and your body. Only use the power supply provided. Any changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment. ISED RADIATION EXPOSURE STATEMENT: Disclaimer: The products, accessories, user interfaces, etc. illustrated in this guide are intended for reference only. Due to product updates, the actual product and the illustrations in this guide may vary. Wyze and Wyze Cam OG are trademarks of Wyze Labs, Inc. NEED HELP? Contact our Support Team: https://wyze.com/support Join the Community: https://wyze.com/community Scan the QR code to learn more WARRANTY Your Wyze product is covered by a one-year limited warranty. You can view the limited warranty terms at https://wyze.com/return-warranty-policy or request a copy by contacting Wyze at +1 (206) 339-9646. This device complies with ISEDC licence-exempt RSS standard(s). Operation is subject to the following two conditions: (1) this device may not cause interference, and (2) this device must accept any interference, including interference that may cause undesired operation of the device. ISED RSS WARNING: This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment. This equipment should be installed and operated with minimum distance 20 cm between the radiator & your body. This transmitter must not be co-located or operating in conjunction with any other antenna or transmitter. FCC RADIATION EXPOSURE STATEMENT: - Reorient or relocate the receiving antenna. - Increase the separation between the equipment and receiver. - Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. - Consult the dealer or an experienced radio/TV technician for help. Read this manual carefully and save it for future reference. UP DOWN Insert the camera’s base stand into the wall plate and p…

Text truncated - open the document above for the full version.

Wyze Labs, Inc. Date: 08/05/2022 TO: Federal Communication Commission Equipment Authorization Branch 7435 Oakland Mills Road Columbia, MID 21046 Regarding: FCC ID: 2AUIUWYZE CGS To whom it may concern: We, the unders igned, hereby authorize Compliance Certification Services (Kunshan) Inc to act on our behalf in all manners relating to application for equipment authorization with respect to the FCC ID above, including signing of all documents relating to these matters. Any and all acts carried out by the agent on our behalf shall have the same effect as acts of our own. We, the undersigned, hereby certify that we are not subject to a denial of federal benefits, that includes FCC benefits, pursuant to Section 5301 of the Anti-Drug Abuse Act of 1988, 21 U.S.C. 853(a). Where our agent signs the application for certification on our behalf, I acknowledge that all responsibility for complying with the terms and conditions for Certification, as specified by SGS North America, Inc., still resides with Wyze Labs, Inc. This authorization is valid until further written notice from the applicant. Sincerely, Print Name: Roy Zhang Title: Certification Senior Manager Signature: On behalf of Company: Wyze Labs, Inc. Telephone: 8617600403105 E-mail: [email protected]

Wyze Labs, Inc. TO: Federal Communication Commission Equipment Authorization Branch 7435 Oakland Mills Road Columbia, MID 21046 Regarding: Confidentiality Request regarding application for FCC ID: 2AUIUWYZECGS LONG TERM CONFIDENTIALITY Pursuant to 47 CFR Section 0.459 and 0.457 of the commission’s rules, the applicant hereby request confidential treatment of the documents listed below, associated with the certification application referenced above. Schematic(s) Block Diagrams Operational Descriptions The documents above contain proprietary information not released to the public. Public disclosure of this information may prove harmful to the business of the applicant. SHORT TERM CONFIDENTIALITY Additionally, the applicant requests the following documents be held confidential until the device is marketed or 30 days from the grant date, whichever is less. If the device is marketed within aforementioned days of the Grant Date, the applicant will notify the TCB per FCC KDB 726920 D01 Confidentiality Request Procedures. External Photos Internal Photos Test Setup Photos User Manuals Sincerely, Print Name: Roy Zhang Title: Certification Senior Manager Signature: On behalf of Company: Wyze Labs, Inc. Telephone: 8617600403105 E-mail: [email protected]

Applicant Declaration Applicant Declaration Rev:0.0 SGS North America Inc. 620 Old Peachtree Road SUITE 100 Suwanee, Georgia 30024 United States Applicant Legal Business Name Wyze Labs, Inc. Address 5808 Lake Washington Blvd NE Ste 300 Kirkland Washington 98033, United States Grantee Code 2AUIU FCC ID 2AUIUWYZECGS Authorized Contact Name Roy Zhang Contact Email [email protected] Contact Phone 8617600403105 I, the undersigned, certify that I am an authorized signatory for the Applicant and therefore declare; a) in accordance with 47CFR2.911(d), all of the statements herein and the exhibits attached hereto are true and correct to the best of my knowledge and belief. b) in accepting a Grant of Equipment Authorization issued by a TCB, under the authority of the FCC, as a result of the representations made in this application, the Applicant is responsible for: (1) labeling the equipment with the exact FCC ID as specified in this application, (2) compliance statement labeling pursuant to the applicable rules, (3) compliance of the equipment with the applicable technical rules, c) if the Applicant is not the actual manufacturer of the equipment, appropriate arrangements have been made with the manufacturer to ensure that production units of this equipment will continue to comply with the FCC’s technical requirements. d) in accordance with 47 CFR 2.909 and KDB394321, the Applicant has read, understood and agrees to accept that they are the responsible party and agree to abide by their responsibilities as specified under 47 CFR 2.909 and KDB394321. e) in accordance with ISO17065, FCC KDB641163, FCC KDB610077, KDB394321 and RSP-100, the Applicant has read, understood, accepts and agrees to abide by the post market surveillance requirements. (1) the Applicant understands, accepts and agrees that a sample may be requested for surveillance testing. (2) the Applicant shall make provisions to always have a production sample available upon request by SGS, FCC and/or ISED. (3) the Applicant shall, upon request by SGS, at the Applicant’s expense, provide a production sample of the requested product to SGS, FCC and/or ISED as instructed. The sample shall include all support devices, cables, software, accessories or other hardware or software required for evaluation, review, certification and audit surveillance of products certified by SGS. f) neither the Applicant nor any party to the application is subject to a denial of Federal benefits, that includes FCC benefits, pursuant to Section 5301 of the Anti-Drug Abuse Act of 1988, 21 U.S.C. §862 because of a conviction for possession or distribution of a controlled substance. See 47CFR 1.2002(b) for the definition of a “party” for these purposes. g) the Applicant has read, understood, accepts and agrees to abide by the SGS North America, Inc.(TCB) terms and conditions. Link to CFRs: https://www.fcc.gov/wireless/bureau-divisions/technologies-systems-and-innovation-division/rules-regulations-title-47 Link to KDBs: https://apps.fcc.gov/oetcf/kdb/index.cfm Link to RSP-100: https://www.ic.gc.ca/eic/site/smt-gst.nsf/eng/sf01130.html Applicant Signature: Date: 08/05/2022 Print Name: Roy Zhang Title: Certification Senior Manager *NOTE: This declaration cannot be signed by an Agent, it shall be signed by an authorized person listed in the FCC database

Wyze Labs, Inc. We, Wyze Labs, Inc. declare that this EUT (FCC ID: 2AUIUWYZECGS & IC: 25466-WYZECGS) doesn’t have ad Hoc Mode function on “US/Canada frequencies“. In addition, the frequency selection feature is disabled by firmware for devices marketed to the US/ Canada. For DTS part of this device, only channels 1-11 will be used in North America. Country code selection is disabled. Should you have any questions or comments regarding this matter, Please have my best attention. Sincerely yours, Print Name: Roy Zhang Title: Certification Senior Manager Signature: On behalf of Company: Wyze Labs, Inc. Telephone: 8617600403105 E-mail: [email protected]

Compliance Certification Services (Kunshan) Inc. Shenzhen Branch SZCCS-TRF-A02 Rev. A/0 Page: 1 of 15 External Photos for FYCR2208000294AT FCC ID: 2AUIUWYZECGS Compliance Certification Services (Kunshan) Inc. Shenzhen Branch Page: 2 of 15 EUT Constructional Details (EUT Photos) WYZECGS Compliance Certification Services (Kunshan) Inc. Shenzhen Branch SZCCS-TRF-A02 Rev. A/0 Page: 2 of 15 Compliance Certification Services (Kunshan) Inc. Shenzhen Branch SZCCS-TRF-A02 Rev. A/0 Page: 3 of 15 Compliance Certification Services (Kunshan) Inc. Shenzhen Branch SZCCS-TRF-A02 Rev. A/0 Page: 4 of 15 Compliance Certification Services (Kunshan) Inc. Shenzhen Branch SZCCS-TRF-A02 Rev. A/0 Page: 5 of 15 WYZECGT Compliance Certification Services (Kunshan) Inc. Shenzhen Branch SZCCS-TRF-A02 Rev. A/0 Page: 6 of 15 Compliance Certification Services (Kunshan) Inc. Shenzhen Branch SZCCS-TRF-A02 Rev. A/0 Page: 7 of 15 WYZECGT Secondary lens Compliance Certification Services (Kunshan) Inc. Shenzhen Branch SZCCS-TRF-A02 Rev. A/0 Page: 8 of 15 Compliance Certification Services (Kunshan) Inc. Shenzhen Branch SZCCS-TRF-A02 Rev. A/0 Page: 9 of 15 Compliance Certification Services (Kunshan) Inc. Shenzhen Branch SZCCS-TRF-A02 Rev. A/0 Page: 10 of 15 Compliance Certification Services (Kunshan) Inc. Shenzhen Branch SZCCS-TRF-A02 Rev. A/0 Page: 11 of 15 Adapter 2 Compliance Certification Services (Kunshan) Inc. Shenzhen Branch SZCCS-TRF-A02 Rev. A/0 Page: 12 of 15 Compliance Certification Services (Kunshan) Inc. Shenzhen Branch SZCCS-TRF-A02 Rev. A/0 Page: 13 of 15 Adapter 1 Compliance Certification Services (Kunshan) Inc. Shenzhen Branch SZCCS-TRF-A02 Rev. A/0 Page: 14 of 15 - End of the Appendix -

17.4mm 45° 35.2mm 0.93mm IC: 25466-WYZECGS FCC ID: 2AUIUWYZECGS BLE MAC: 7C:7C:B3:7F:A9:AE WIFI MAC: 7C:7C:B3:7F:A9:AE Model: WYZECGS INPUT: 5V DC, 1A Designed in Seattle Made in China Only use the power supply provided. Utilisez uniquement le chargeur fourni. Wyze Cam OG QR CODE QR code: 7.5x7.5mm Gilroy Medium 3pt Gilroy Bold 5pt Gilroy Semibold 4pt Gilroy Medium 3pt 17.4mm 35.2mm 0.93mm QR code: 7.5x7.5mm Gilroy Medium 3pt Gilroy Bold 5pt Gilroy Semibold 4pt Gilroy Medium 3pt ±0.5 来料方式 3.0 ±0.5 3.0 Wyze小方块机身铭牌1.5 厚度: 0.15mm 尺寸: 17.4mm X 35.2mm 材质：白色合成纸 颜色：黑色印刷 Weather Resistance : IP65 IC: 25466-WYZECGS FCC ID: 2AUIUWYZECGS BLE MAC: 7C:7C:B3:7F:A9:AE WIFI MAC: 7C:7C:B3:7F:A9:AE Model: WYZECGT INPUT: 5V DC, 1A Designed in Seattle Made in China Only use the power supply provided. Utilisez uniquement le chargeur fourni. Wyze Cam OG Telephoto 3x QR CODE Weather Resistance : IP65 Label location

Compliance Certification Services (Kunshan) Inc. Shenzhen Branch SZCCS-TRF-A03 Rev. A/0 Page: 1 of 12 Internal Photos for FYCR2208000294AT FCC ID: 2AUIUWYZECGS Compliance Certification Services (Kunshan) Inc. Shenzhen Branch SZCCS-TRF-A03 Rev. A/0 Page: 2 of 12 EUT Constructional Details (EUT Photos) WYZECGS Compliance Certification Services (Kunshan) Inc. Shenzhen Branch SZCCS-TRF-A03 Rev. A/0 Page: 3 of 12 Antenna Compliance Certification Services (Kunshan) Inc. Shenzhen Branch SZCCS-TRF-A03 Rev. A/0 Page: 4 of 12 Compliance Certification Services (Kunshan) Inc. Shenzhen Branch SZCCS-TRF-A03 Rev. A/0 Page: 5 of 12 WYZECGT Compliance Certification Services (Kunshan) Inc. Shenzhen Branch SZCCS-TRF-A03 Rev. A/0 Page: 6 of 12 Antenna Compliance Certification Services (Kunshan) Inc. Shenzhen Branch SZCCS-TRF-A03 Rev. A/0 Page: 7 of 12 Compliance Certification Services (Kunshan) Inc. Shenzhen Branch SZCCS-TRF-A03 Rev. A/0 Page: 8 of 12 WYZECGT Secondary lens Compliance Certification Services (Kunshan) Inc. Shenzhen Branch SZCCS-TRF-A03 Rev. A/0 Page: 9 of 12 Compliance Certification Services (Kunshan) Inc. Shenzhen Branch SZCCS-TRF-A03 Rev. A/0 Page: 10 of 12 Adapter 2 Compliance Certification Services (Kunshan) Inc. Shenzhen Branch SZCCS-TRF-A03 Rev. A/0 Page: 11 of 12 Adapter 1 Compliance Certification Services (Kunshan) Inc. Shenzhen Branch SZCCS-TRF-A03 Rev. A/0 Page: 12 of 12 - End of the Appendix -

Compliance Certification Services (Kunshan) Inc. Shenzhen Branch SZCCS-TRF-01 Rev. A/0 Aug01,2022 Report No.: FYCR220800029403 Page: 1 of 13 Winkey Wang EMC Technical Manager RF EXPOSURE EVALUATION REPORT Application No.: FYCR2208000294AT Applicant: Wyze Labs, Inc. Address of Applicant: 5808 Lake Washington Blvd NE Ste 300, Kirkland, Washington 98033 United States Manufacturer: ShenZhen Dophigo IoT Technology Co.,Ltd. Address of Manufacturer: B02, first floor, building No.9, Nanshan Yungu start-up business industrial park second part, No.2, Pingshan first road, Pingshan Community, Taoyuan Street, Nanshan district, Shenzhen. FYCR2208000294AT Shenzhen Sunwinon Electronic Co., LTD Wyze Labs, Inc. 1-6 Floor, No.101, Building 4, 6-6 Yanshan Avenue, Yanchuan Community, Yanluo Street, Baoan District, Shenzhen, China Equipment Under Test (EUT): EUT Name: Wyze Cam OG, Wyze Cam OG Telephoto 3x Model No.: WYZECGS, WYZECGT   Please refer to section 2 of this report which indicates which model was actually tested and which were electrically identical. Trade Mark: WYZE FCC ID: 2AUIUWYZECGS Standard(s) : FCC Rules 47 CFR §2.1091 KDB 447498 D04 interim General RF Exposure Guidance v01 Date of Receipt: 2022-08-03 Date of Evaluation: 2022-08-08 to 2022-08-30 Date of Issue: 2022-09-20 Evaluation Result: Pass* * In the configuration evaluated, the EUT complied with the standards specified above. Compliance Certification Services (Kunshan) Inc. Shenzhen Branch SZCCS-TRF-01 Rev. A/0 Aug01,2022 Report No.: FYCR220800029403 Page: 2 of 13 Revision Record Version Chapter Date Modifier Remark 01 2022-09-20 Original Authorized for issue by: Tree Zhan/Project Engineer Winkey Wang/Reviewer Compliance Certification Services (Kunshan) Inc. Shenzhen Branch SZCCS-TRF-01 Rev. A/0 Aug01,2022 Report No.: FYCR220800029403 Page: 3 of 13 2 Contents Page 1 Cover Page ................................................................................................................................................ 1 2 Contents .................................................................................................................................................... 3 3 General Information .................................................................................................................................. 4 3.1 General Description of E.U.T. ............................................................................................................ 4 3.2 Details of E.U.T. ................................................................................................................................. 4 3.3 Separation Distance ........................................................................................................................... 6 3.4 Test Location ...................................................................................................................................... 7 3.5 Test Facility ........................................................................................................................................ 7 3.6 Deviation from Standards ................................................................................................................... 7 3.7 Abnormalities from Standard Conditions ........................................................................................... 7 4 FCC Radiofrequency radiation exposure limits .................................................................................... 8 4.1 Blanket 1 mW Blanket Exemption ...................................................................................................... 8 4.2 MPE-based Exemption ...................................................................................................................... 8 4.3 SAR-based Exemption ....................................................................................................................... 9 5 Measurement and Calculation ............................................................................................................... 12 5.1 Maximum transmit power ................................................................................................................. 12 5.2 RF Exposure Calculation ................................................................................................................. 13 Compliance Certification Services (Kunshan) Inc. Shenzhen Branch SZCCS-TRF-01 Rev. A/0 Aug01,2022 Report No.: FYCR220800029403 Page: 4 of 13 3 General Information 3.1 General Description of E.U.T. Product Type: Portable device Mobile device Fixed device 3.2 Details of E.U.T. Power Supply: Adapter 1 GangQi: Model: GQ06A-050100-ZUU Input: 100-240V 50/60Hz 0.3A Output: 5V 1A 5W Adapter 2 Dee Van: Model: DSA-5PF16-05 FUS 050100U Input: 100-240V 50/60Hz 0.2A Output: 5V 1A 5W Cable(s): USB cable 182cm unshielded WYZECGS & WYZECGT built-in USB cable 17cm unshielded For BLE: Operation Frequency: 2402MHz to 2480MHz Bluetooth Version: V5.1 LE Modulation Type: GFSK Data Rate: 1M/bit, 2M/bit Number of Channels: 40 Channel Spacing: 2MHz Antenna Type: Metal antenna Antenna Gain: 2.36dBi For 2.4G WIFI: Operation Frequency: 802.11b/g/n(HT20): 2412MHz to 2462MHz;802.11n(HT40): 2422MHz to 2452MHz Modulation Type: 802.11b: DSSS (CCK, DQPSK, DBPSK);802.11g/n: OFDM (64QAM, 16QAM, QPSK, BPSK) Number of Channels: 802.11b/g/n(HT20):11;802.11n(HT40):7 Channel Spacing: 5MHz Antenna Type: Metal antenna Antenna Gain: 2.36dBi Remark: The information in this section is provided by the applicant or manufacturer, CCS is not liable to the accuracy, suitability, reliability or/and integrity of the information. Compliance Certification Services (Kunshan) Inc. Shenzhen Branch SZCCS-TRF-01 Rev. A/0 Aug01,2022 Report No.: FYCR220800029403 Page: 5 of 13 Declaration of EUT Family Grouping: Model No.: WYZECGS, WYZECGT Since according to the declaration from the applicant, the electrical circuit design, PCB layout, components used, internal wiri…

Text truncated - open the document above for the full version.

UNLESS OTHER SPECIFIED TOLERANCES ON： 佳邦科技股份有限公司 INPAQ TECHNOLOGY CO., LTD. X＝± X.X＝± X.XX＝± ANGLES＝± HOLEDIA＝± SCALE： UNIT：mm THIS DRAWINGS AND SPECIFICATIONS ARE THE PROPERTY OF INPAQ TECHNOLOGY CO.,LTD.AND SHALL NOT BE REPRODUCED OR USED AS THE BASIS FOR THE MANUFACTURE OR SALE OF APPARATUS OR DEVICES WITHOUT PERMISSION DRAWN BY：资业辉 CHECKED BY：赵付辉 DESIGNED BY：渠宏坚 APPROVED BY：赵付辉 TITLE：WAG-M-LA-00-064 Specification DOCUMENT PAGE REV. NO. P4 PAGE 1 OF 5 WAG-M-LA-00-064 Specification 1. Explanation of part number : WAG _ M _ LA _ 00 _ 064 (1) (2) (3) (4) (5) (1) Product Type：Wireless Antenna (2) Material: Metal (3) Frequency : 2400-2500MHz (4) Coaxial Cable Type : 00 (5) Suffix :064 2. Storage Condition: Temperature -40 to +70°C Humidity 65±20 % RH 3. Operating Condition: Temperature -40 to +70°C Humidity 65±20 % RH 4. Electrical Specification : Those specifications were specially defined for 技威Gemini wifi model, and all characteristics were measured under the model’s handset testing. 4-1. Frequency Band: Frequency Band MHz WIFI 2400-2500 UNLESS OTHER SPECIFIED TOLERANCES ON： 佳邦科技股份有限公司 INPAQ TECHNOLOGY CO., LTD. X＝± X.X＝± X.XX＝± ANGLES＝± HOLEDIA＝± SCALE： UNIT：mm THIS DRAWINGS AND SPECIFICATIONS ARE THE PROPERTY OF INPAQ TECHNOLOGY CO.,LTD.AND SHALL NOT BE REPRODUCED OR USED AS THE BASIS FOR THE MANUFACTURE OR SALE OF APPARATUS OR DEVICES WITHOUT PERMISSION DRAWN BY：资业辉 CHECKED BY：赵付辉 DESIGNED BY：渠宏坚 APPROVED BY：赵付辉 TITLE：WAG-M-LA-00-064 Specification DOCUMENT PAGE REV. NO. P4 PAGE 2 OF 5 4-2. Impedance 50 ohm nominal 4-3. Matching circuit None 4-4. VSWR 4-4.1 Measuring Method 1.A 50Ωcoaxial cable is connected to the antenna. Then this cable is connected to a network analyzer to measure the VSWR 2.Keeping this jig away from metal at least 20cm 4-4.2 Measurement frequency points and VSWR value Frequency (Unit MHz) 2400 2450 2500 VSWR 1.31 1.39 1.43 UNLESS OTHER SPECIFIED TOLERANCES ON： 佳邦科技股份有限公司 INPAQ TECHNOLOGY CO., LTD. X＝± X.X＝± X.XX＝± ANGLES＝± HOLEDIA＝± SCALE： UNIT：mm THIS DRAWINGS AND SPECIFICATIONS ARE THE PROPERTY OF INPAQ TECHNOLOGY CO.,LTD.AND SHALL NOT BE REPRODUCED OR USED AS THE BASIS FOR THE MANUFACTURE OR SALE OF APPARATUS OR DEVICES WITHOUT PERMISSION DRAWN BY：资业辉 CHECKED BY：赵付辉 DESIGNED BY：渠宏坚 APPROVED BY：赵付辉 TITLE：WAG-M-LA-00-064 Specification DOCUMENT PAGE REV. NO. P4 PAGE 3 OF 5 4-5. Efficiency and Gain 4-5.1 Measure method 1. Using a low loss coaxial cable to link a standard handset jig 2. Fixed this handset jig on chamber’s rotator plane 3. Linking jig into network analyzer port and using a probing horn antenna to collect data. 4. Using another standard gain horn antenna to calibrated those data 4-5.2 Chamber definition 1. An anechoic chamber (7mx4mx3m) which satisfied far-field condition was applied to avoid multi-path effect 2. The quite room region is 40cmx40cmx40cm at the center of rotator 3. The distance between DUT and standard antenna is 4.38 m 4. Probing antenna (9120D horn antenna) and standard gain horn antenna (BBHA9120 LPF 700MHz ~6GHz) 4.38 m Rotatory controller Vector Network Aanlyzer Port 2Port 1 DUT Far-Field Chamber Std. Ant. UNLESS OTHER SPECIFIED TOLERANCES ON： 佳邦科技股份有限公司 INPAQ TECHNOLOGY CO., LTD. X＝± X.X＝± X.XX＝± ANGLES＝± HOLEDIA＝± SCALE： UNIT：mm THIS DRAWINGS AND SPECIFICATIONS ARE THE PROPERTY OF INPAQ TECHNOLOGY CO.,LTD.AND SHALL NOT BE REPRODUCED OR USED AS THE BASIS FOR THE MANUFACTURE OR SALE OF APPARATUS OR DEVICES WITHOUT PERMISSION DRAWN BY：资业辉 CHECKED BY：赵付辉 DESIGNED BY：渠宏坚 APPROVED BY：赵付辉 TITLE：WAG-M-LA-00-064 Specification DOCUMENT PAGE REV. NO. P4 PAGE 4 OF 5 4-5.3 Efficiency and Gain Antenna gain is marked (dBi) and is based on STANDARD HORN antenna. The data shows Peak Gain and Average Gain. 2.4G 2D&3D Radiation Pattern Frequency (MHz) 2400 2450 2500 Efficiency (%) 53.59 56.21 53.84 Gain (dBi) 2.12 2.36 2.32 UNLESS OTHER SPECIFIED TOLERANCES ON： 佳邦科技股份有限公司 INPAQ TECHNOLOGY CO., LTD. X＝± X.X＝± X.XX＝± ANGLES＝± HOLEDIA＝± SCALE： UNIT：mm THIS DRAWINGS AND SPECIFICATIONS ARE THE PROPERTY OF INPAQ TECHNOLOGY CO.,LTD.AND SHALL NOT BE REPRODUCED OR USED AS THE BASIS FOR THE MANUFACTURE OR SALE OF APPARATUS OR DEVICES WITHOUT PERMISSION DRAWN BY：资业辉 CHECKED BY：赵付辉 DESIGNED BY：渠宏坚 APPROVED BY：赵付辉 TITLE：WAG-M-LA-00-064 Specification DOCUMENT PAGE REV. NO. P4 PAGE 5 OF 5 5. Mechanical Specification: 5-1. Mechanical Configuration (Unit: mm) The appearance of the antenna is according to drawing Figure 5-1-1 *0.60±0.05 此产品符合： ROHS2.0,REACH(SVHC225),TSCA *14.80±0.15 *11.80±0.15 *1.00±0.10

Compliance Certification Services (Kunshan) Inc. Shenzhen Branch SZCCS-TRF-01 Rev. A/0 Aug01,2022 Report No.: FYCR220800029402 Page: 124 of 149 3. Maximum Conducted Output Power 3.1 Power 3.1.1 Test Result Mode TX Type Frequency (MHz) Maximum Average Conducted Output Power (dBm) Verdict ANT1 Limit 802.11b SISO 2412 17.69 <=30 Pass 2437 18.47 <=30 Pass 2462 18.70 <=30 Pass 802.11g SISO 2412 19.79 <=30 Pass 2437 20.00 <=30 Pass 2462 19.50 <=30 Pass 802.11n (HT20) SISO 2412 19.05 <=30 Pass 2437 20.14 <=30 Pass 2462 18.82 <=30 Pass 802.11n (HT40) SISO 2422 14.19 <=30 Pass 2437 14.15 <=30 Pass 2452 14.53 <=30 Pass Compliance Certification Services (Kunshan) Inc. Shenzhen Branch SZCCS-TRF-01 Rev. A/0 Aug01,2022 Report No.: FYCR220800029402 Page: 125 of 149 4. Maximum Power Spectral Density 4.1 PSD 4.1.1 Test Result Mode TX Type Frequency (MHz) Maximum PSD (dBm/3kHz) Verdict ANT1 Limit 802.11b SISO 2412 -5.75 <=8 Pass 2437 -3.29 <=8 Pass 2462 -4.33 <=8 Pass 802.11g SISO 2412 -4.59 <=8 Pass 2437 -4.40 <=8 Pass 2462 -5.33 <=8 Pass 802.11n (HT20) SISO 2412 -5.43 <=8 Pass 2437 -4.26 <=8 Pass 2462 -5.32 <=8 Pass 802.11n (HT40) SISO 2422 -13.43 <=8 Pass 2437 -13.41 <=8 Pass 2452 -11.39 <=8 Pass Compliance Certification Services (Kunshan) Inc. Shenzhen Branch SZCCS-TRF-01 Rev. A/0 Aug01,2022 Report No.: FYCR220800029402 Page: 126 of 149 4.1.2 Test Graph 802.11b_LCH_2412MHz_Ant1 (SISO)_NTNV 802.11b_MCH_2437MHz_Ant1 (SISO)_NTNV Compliance Certification Services (Kunshan) Inc. Shenzhen Branch SZCCS-TRF-01 Rev. A/0 Aug01,2022 Report No.: FYCR220800029402 Page: 127 of 149 802.11b_HCH_2462MHz_Ant1 (SISO)_NTNV 802.11g_LCH_2412MHz_Ant1 (SISO)_NTNV Compliance Certification Services (Kunshan) Inc. Shenzhen Branch SZCCS-TRF-01 Rev. A/0 Aug01,2022 Report No.: FYCR220800029402 Page: 128 of 149 802.11g_MCH_2437MHz_Ant1 (SISO)_NTNV 802.11g_HCH_2462MHz_Ant1 (SISO)_NTNV Compliance Certification Services (Kunshan) Inc. Shenzhen Branch SZCCS-TRF-01 Rev. A/0 Aug01,2022 Report No.: FYCR220800029402 Page: 129 of 149 802.11n(HT20)_LCH_2412MHz_Ant1 (SISO)_NTNV 802.11n(HT20)_MCH_2437MHz_Ant1 (SISO)_NTNV Compliance Certification Services (Kunshan) Inc. Shenzhen Branch SZCCS-TRF-01 Rev. A/0 Aug01,2022 Report No.: FYCR220800029402 Page: 130 of 149 802.11n(HT20)_HCH_2462MHz_Ant1 (SISO)_NTNV 802.11n(HT40)_LCH_2422MHz_Ant1 (SISO)_NTNV Compliance Certification Services (Kunshan) Inc. Shenzhen Branch SZCCS-TRF-01 Rev. A/0 Aug01,2022 Report No.: FYCR220800029402 Page: 131 of 149 802.11n(HT40)_MCH_2437MHz_Ant1 (SISO)_NTNV 802.11n(HT40)_HCH_2452MHz_Ant1 (SISO)_NTNV Compliance Certification Services (Kunshan) Inc. Shenzhen Branch SZCCS-TRF-01 Rev. A/0 Aug01,2022 Report No.: FYCR220800029402 Page: 132 of 149 5. Unwanted Emissions InStandard Non-restricted Frequency Bands 5.1 Ref 5.1.1 Test Result Mode TX Type Frequency (MHz) ANT Level of Reference (dBm) 802.11b SISO 2412 1 8.87 2437 1 9.33 2462 1 10.05 802.11g SISO 2412 1 10.27 2437 1 10.54 2462 1 10…

Text truncated - open the document above for the full version.