FCCID.CO- FCC ID Database
HomeCompaniesEquipment ClassesSearch

© 2026 FCC ID Database. All rights reserved.

AboutContactData sourced from FCC public records
  1. Home/
  2. Wyze Labs, Inc./
  3. 2AUIUWYZECOP

2AUIUWYZECOPWyze Battery Cam Pro

Wyze Labs, Inc.
Wyze Battery Cam Pro - FCC ID 2AUIUWYZECOP - Wyze Labs, Inc.
Click to zoom

Application Details

Equipment Class
DTS - Digital Transmission System
Date of Grant
Jan 31, 2023
Application Purpose
Original Equipment
Date of Application
Jan 31, 2023
Equipment Note
Wyze Battery Cam Pro
Frequency Range
2404.00000000 - 2478.00000000
Company
Wyze Labs, Inc.
Country
United States

Documents & Files

Select a file to view

Users Manual

↗

Attestation Statements

↗
↗

Cover Letter(s)

↗
↗
↗

External Photos

↗

ID Label/Location Info

↗

Internal Photos

↗

RF Exposure Info

↗

Test Report

↗
↗
↗

Test Setup Photos

↗
↗

Document Text

Text extracted from the exhibit documents filed with the FCC. Open a document above to read the original.

Users Manual

120 mm120 mm 105 mm105 mm PRECAUTIONS• Prolonged direct sunlight can heat the inside of your camera past its maximum operating temperature of 122°F (50°C). Avoid direct sunlight where possible and only use your camera in environments within its operating temperature range: -4° to 122°F (-20° to 50°C).• To charge your camera, plug the included micro USB cable into the USB port on your base station and connect it to your camera. This product is intended to be supplied by a UL Listed power adapter marked “LPS” (Limited Power Source) and rated with an output of 5Vdc, 2A minimum, Tma = 50 º C minimum. • If powered by a power adapter with ground pin, the adapter should be properly grounded.CAUTION: Risk of fire or explosion if the battery is replaced by an incorrect type. • Replacement of a battery with an incorrect type that can defeat a safeguard (for example, in the case of some lithium battery types); • Disposal of a battery into fire or a hot oven, or mechanically crushing or cutting of a battery, that can result in an explosion; • Leaving a battery in an extremely high temperature surrounding environment that can result in an explosion or the leakage of flammable liquid or gas; and • A battery subjected to extremely low air pressure that may result in an explosion or the leakage of flammable liquid or gas. Where applicable, antenna type(s), antenna models(s), and worst-case tilt angle(s) necessary to remain compliant with the e.i.r.p. elevation mask requirement set forth in section 6.2.2.3 shall be clearly indicated. STATUS LIGHT GUIDE Solid red lightThe device is connected Quickly flashing red lightBattery level is at 0%Flashing green lightThe device is chargingSolid green lightThe battery is fullNo indicator lightThe device is powered off or asleep Solid yellow lightThe device is powered on and initializing Flashing yellow and blue lightsThe device is ready for pairingSolid blue lightPairing successful Any changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate this equipment. This transmitter must not be co-located or operating in conjunction with any other antenna or transmitter. This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) This device must accept any interference received, including interference that may cause undesired operation. This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. H owever, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:- Reorient or relocate the receiving antenna.- Increase the separation between the equipment and receiver.- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.- Consult the dealer or an experienced radio/TV technician for help.This device meets all the other requirements specified in Part 15E, Section 15.407 of the FCC Rules.FCC WARNING This device contains licence-exempt transmitter(s)/receiver(s) that comply with Innovation, Science and Economic Development Canada’s licence-exempt RSS(s). Operation is subject to the following two conditions: (1) This device may not cause interference, and (2) This device must accept any interference, including interference that may cause undesired operation of the device. ISED RSS WARNING This equipment complies with ISED RF radiation exposure limits set forth for an uncontrolled environment. This equipment should be installed and operated with a minimum distance of 20 cm between the radiator and your body. Only use the power supply provided. Any changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment.ISED RADIATION EXPOSURE STATEMENT This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment. This equipment should be installed and operated with minimum distance 20cm between the radiator & your body.FCC RADIATION EXPOSURE STATEMENT Record Full-Length VideosGet unlimited full-length video recordings.Smart AI DetectionDetect people, packages, vehicles, and more.Back-to-Back Event RecordingCapture everything without 5-minute gaps.Exclusive DiscountsGet exclusive discounts on Wyze products.Subscribe or learn more at services.wyze.com. GET BETTER SECURITY WITH IN THE BOX Wyze Battery Cam Pro × 1 Battery Pack × 1 Wall Mount × 1 USB Cable × 1 Screw Assembly × 1 Silica Gel Desiccant × 1 Quick Start Guide × 1 Disclaimer: The products, accessories, user interfaces, etc. illustrated in this guide are intended for reference only. Due to product updates, the actual product and the illustrations in this guide may vary.Read this manual carefully and save it for future reference. Enregistrez des vidéos complètesObtenez un nombre illimité d'enregistrements vidéo complets.Détection intelligente par IADétectez les personnes, les paquets, les véhicules, et plus encore.Enregistrement d'événements dos à dosCapturez tout sans interruptions de 5 minutes.Remises exclusivesBénéficiez de remises exclusives sur les produits Wyze.Inscrivez-vous ou apprenez-en plus sur services.wyze.com. OBTENEZ UNE MEILLEURESÉCURITÉ AVEC DANS LA BOÎTE Wyze Battery Cam Pro × 1 Batterie × 1 Support mural × 1 Câble USB × 1…

Text truncated - open the document above for the full version.

Attestation Statements

Wyze Labs, Inc. 5808 Lake Washington Blvd NE Ste 300 Kirkland Washington United States 98033 Date: December 5, 2022 We, Wyze Labs, Inc. declare that the device does not support channel 12 ~ 13 in 2.4GHz band and any non-US channels in all the operational mode(s) for the following product. FCC ID: 2AUIUWYZECOP If you should have any question(s) regarding this declaration, please don’t hesitate to contact us. Thank you! ----------------------------------- Roy Zhang / Certification Senior Manager Wyze Labs, Inc. Tel: +86 17600403105 E-mail: [email protected]

Attestation Statements

Wyze Labs, Inc. 5808 Lake Washington Blvd NE Ste 300 Kirkland Washington United States 98033 Declaration letter Federal Communications Commission 7435 Oakland Mills Road Columbia MD 21046 Subject: Declaration letter for label requirement Date: 2022-12-05 FCC ID: 2AUIUWYZECOP The label is permanent affixed in the battery compartment, and the EUT will be selling to market without the battery installed. The users can see the label during the battery installation process. The battery cover can be opened without any special tools. Please don’t hesitate to contact us, if you have any question(s). Thank you! Sincerely yours, ----------------------------------- Roy Zhang / Certification Senior Manager Wyze Labs, Inc. Tel: +86 17600403105 E-mail: [email protected]

Cover Letter(s)

Wyze Labs, Inc. 5808 Lake Washington Blvd NE Ste 300 Kirkland Washington United States 98033 Date: 2022-12-05 FCC ID: 2AUIUWYZECOP To the attention of Federal Communications Commission Authorization and Evaluation Division Permanent Confidentiality Request Pursuant to Sections 0.457 and 0.459 of the Commission’s Rules, the Applicant hereby requests confidential treatment of information accompanying this Application as outlined below: Schematics Block Diagram Operational Description Software Operational Description The above materials contain trade secrets and proprietary information not customarily released to the public. The public disclosure of these matters might be harmful to the Applicant and provide unjustified benefits to its competitors. The Applicant understands that pursuant to Rule 0.457, disclosure of this Application and all accompanying documentation will not be made before the date of the Grant for this application. Sincerely yours, ----------------------------------- Roy Zhang / Certification Senior Manager Wyze Labs, Inc. Tel: +86 17600403105 E-mail: [email protected]

Cover Letter(s)

Wyze Labs, Inc. 5808 Lake Washington Blvd NE Ste 300 Kirkland Washington United States 98033 Date: 2022-12-05 FCC ID: 2AUIUWYZECOP To the attention of Federal Communications Commission Authorization and Evaluation Division Confidentiality Request Pursuant to Sections 0.457 and 0.459 of the commission’s rules, we request short-term confidential treatment for the following information until 180 days after the Grant Date of Equipment Authorization in order to ensure sensitive business information remains confidential until the actual marketing of the device: External photos Test Setup photos User’s manual Internal Photos Sincerely yours, ----------------------------------- Roy Zhang / Certification Senior Manager Wyze Labs, Inc. Tel: +86 17600403105 E-mail: [email protected]

Cover Letter(s)

Wyze Labs, Inc. 5808 Lake Washington Blvd NE Ste 300 Kirkland Washington United States 98033 Date: 2022-12-05 FCC ID: 2AUIUWYZECOP AUTHORIZATION LETTER To Whom It May Concern: Wyze Labs, Inc. hereby authorizes Andrea Hsia / Supervisor of Bureau Veritas Consumer Products Services (H.K.) Ltd., Taoyuan Branch (“BV CPS Taoyuan”), to act on its behalf in all matters relating to the Federal Communication Commission (“FCC”) application for equipment authorization in connection with the FCC ID listed above, including signing of all documents relating to these matters. Any and all acts carried out by Andrea Hsia / Supervisor of BV CPS Taoyuan on Wyze Labs, Inc.’s behalf, within the scope of the powers granted herein, shall have the same effect as acts of its own. If you have any questions regarding the authorization, please don’t hesitate to contact us. Sincerely yours, ----------------------------------------------- Roy Zhang / Certification Senior Manager Wyze Labs, Inc. Tel: +86 17600403105 E-mail: [email protected]

External Photos

Reference No.:BAOZ-WTW-P22040585_EXT Page 1/5 CONSTRUCTION PHOTOS OF EUT Reference No.:BAOZ-WTW-P22040585_EXT Page 2/5 Reference No.:BAOZ-WTW-P22040585_EXT Page 3/5 Reference No.:BAOZ-WTW-P22040585_EXT Page 4/5 Reference No.:BAOZ-WTW-P22040585_EXT Page 5/5

ID Label/Location Info

Label Location Model: WYZECOP

Internal Photos

Reference No.:BAOZ-WTW-P22040585_INT Page 1/15 CONSTRUCTION PHOTOS OF EUT Reference No.:BAOZ-WTW-P22040585_INT Page 2/15 Reference No.:BAOZ-WTW-P22040585_INT Page 3/15 Reference No.:BAOZ-WTW-P22040585_INT Page 4/15 Reference No.:BAOZ-WTW-P22040585_INT Page 5/15 Reference No.:BAOZ-WTW-P22040585_INT Page 6/15 Reference No.:BAOZ-WTW-P22040585_INT Page 7/15 Reference No.:BAOZ-WTW-P22040585_INT Page 8/15 Reference No.:BAOZ-WTW-P22040585_INT Page 9/15 Reference No.:BAOZ-WTW-P22040585_INT Page 10/15 24GHz module with integrated antenna Reference No.:BAOZ-WTW-P22040585_INT Page 11/15 Reference No.:BAOZ-WTW-P22040585_INT Page 12/15 WLAN 2.4GHz+WLAN5GHz+Bluetooth antenna Reference No.:BAOZ-WTW-P22040585_INT Page 13/15 Reference No.:BAOZ-WTW-P22040585_INT Page 14/15 Reference No.:BAOZ-WTW-P22040585_INT Page 15/15

RF Exposure Info

Report No.: MFBAOZ-WTW-P22040585 Page No. 1 / 7 Report Format Version: 6.1.1 Reference No.: RF Exposure Report Report No.: MFBAOZ-WTW-P22040585 FCC ID: 2AUIUWYZECOP Test Model: WYZECOP Received Date: 2022/4/19 Test Date: 2022/6/20 Issued Date: 2022/12/26 Applicant: Wyze Labs, Inc Address: 5808 Lake Washington Blvd NE, Ste 300 Kirkland WA United States Of America Issued By: Bureau Veritas Consumer Products Services (H.K.) Ltd., Taoyuan Branch Hsin Chu Laboratory Lab Address: E-2, No.1, Li Hsin 1st Road, Hsinchu Science Park, Hsinchu City 300, Taiwan Test Location: E-2, No.1, Li Hsin 1st Road, Hsinchu Science Park, Hsinchu City 300, Taiwan FCC Registration / Designation Number: 723255 / TW2022 This report is governed by, and incorporates by reference, the Conditions of Testing as posted at the date of issuance of this report at http://www.bureauveritas.com/home/about-us/our-business/cps/about-us/terms-conditions/ and is intended for your exclusive use. Any copying or replication of this report to or for any other person or entity, or use of our name or trademark, is permitted only with our prior written permission. This report sets forth our findings solely with respect to the test samples identified herein. The results set forth in this report are not indicative or representative of the quality or characteristics of the lot from which a test sample was taken or any similar or identical product unless specifically and expressly noted. Our report includes all of the tests requested by you and the results thereof based upon the information that you provided to us. Measurement uncertainty is only provided upon request for accredited tests. Statements of conformity are based on simple acceptance criteria without taking measurement uncertainty into account, unless otherwise requested in writing. You have 60 days from date of issuance of this report to notify us of any material error or omission caused by our negligence or if you require measurement uncertainty; provided, however, that such notice shall be in writing and shall specifically address the issue you wish to raise. A failure to raise such issue within the prescribed time shall constitute your unqualified acceptance of the completeness of this report, the tests conducted and the correctness of the report contents. Report No.: MFBAOZ-WTW-P22040585 Page No. 2 / 7 Report Format Version: 6.1.1 Reference No.: Table of Contents Release Control Record .................................................................................................................................. 3 1 Certificate of Conformity ...................................................................................................................... 4 2 RF Exposure .......................................................................................................................................... 5 2.1 Limits for Maximum Permissible Exposure (MPE) .............................................................................. 5 2.2 MPE Calculation Formula ................................................................................................................... 5 2.3 Classification ....................................................................................................................................... 5 2.4 Antenna Gain ...................................................................................................................................... 6 2.5 Calculation Result of Maximum Conducted Power ............................................................................. 7 Report No.: MFBAOZ-WTW-P22040585 Page No. 3 / 7 Report Format Version: 6.1.1 Reference No.: Release Control Record Issue No. Description Date Issued MFBAOZ-WTW-P22040585 Original release. 2022/12/26 Report No.: MFBAOZ-WTW-P22040585 Page No. 4 / 7 Report Format Version: 6.1.1 Reference No.: 1 Certificate of Conformity Product: Wyze Battery Cam Pro Brand: WYZE Test Model: WYZECOP Sample Status: Engineering sample Applicant: Wyze Labs, Inc Test Date: 2022/6/20 Standards: FCC Part 2 (Section 2.1091) KDB 447498 D01 General RF Exposure Guidance v06 The above equipment has been tested by Bureau Veritas Consumer Products Services (H.K.) Ltd., Taoyuan Branch, and found compliance with the requirement of the above standards. The test record, data evaluation & Equipment Under Test (EUT) configurations represented herein are true and accurate accounts of the measurements of the sample’s EMC characteristics under the conditions specified in this report. Prepared by : , Date: 2022/12/26 Vivian Huang / Specialist Approved by : , Date: 2022/12/26 May Chen / Manager Report No.: MFBAOZ-WTW-P22040585 Page No. 5 / 7 Report Format Version: 6.1.1 Reference No.: 2 RF Exposure 2.1 Limits for Maximum Permissible Exposure (MPE) Frequency Range (MHz) Electric Field Strength (V/m) Magnetic Field Strength (A/m) Power Density (mW/cm 2 ) Average Time (minutes) Limits For General Population / Uncontrolled Exposure 0.3-1.34 614 1.63 (100)* 30 1.34-30 824/f 2.19/f (180/f 2 )* 30 30-300 27.5 0.073 0.2 30 300-1500 ... ... f/1500 30 1500-100,000 ... ... 1.0 30 f = Frequency in MHz ; *Plane-wave equivalent power density 2.2 MPE Calculation Formula Pd = (Pout*G) / (4*pi*r 2 ) where Pd = power density in mW/cm 2 Pout = output power to antenna in mW G = gain of antenna in linear scale Pi = 3.1416 R = distance between observation point and center of the radiator in cm 2.3 Classification The antenna of this product, under normal use condition, is at least 20 cm away from the body of the user. So, this device is classified as Mobile Device. Report No.: MFBAOZ-WTW-P22040585 Page No. 6 / 7 Report Format Version: 6.1.1 Reference No.: 2.4 Antenna Gain Antenna No. Antenna Gain (dBi) Frequency Range (GHz) Antenna Type Connector Type Cable Length (cm) 1 2.43 2.4~2.4835 Dipole ipex(MHF) 4 3.48 5.15~5.85 2 2 24~24.25 Array None - Note: The above Antenna information is declared by manufacturer and for more detailed …

Text truncated - open the document above for the full version.

Test Report

SP Antenna Check Sheet Date: 2022/12/14 1 SP Antenna Check Sheet © 2018 by Alpha Networks Corporation All Right Reserved SP Antenna Check Sheet Date: 2022/12/14 2 Revision History: Version Date Change Description 1.0 2022/12/14 New Release SP Antenna Check Sheet Date: 2022/12/14 3 Contents Index.............................................................................. 3 Antenna Specification............................................................... 4 Test Result........................................................................ 5 Return Loss................................................................. 5 2D Radiation Patterns....................................................... 6 Antenna Gain Table....................................................... 7 Antenna Vendor Information................................................ 8 SP Antenna Check Sheet Date: 2022/12/14 4 Antenna Specification Ant . Antenna Brand Antenna. model Antenna type Antenna Gain (dBi) Frequency Range (MHz) Connector type Cable length (cm) Cable Loss Remark #1 PSA RFPCA2 21804IM LB303 Dipole 2.43@2G 3.48 @5G 2400~2500 5150~5850 IPEX 4cm X X SP Antenna Check Sheet Date: 2022/12/14 5 Test Result: Return Loss SP Antenna Check Sheet Date: 2022/12/14 6 2D Radiation Patterns: 2.4G 5G SP Antenna Check Sheet Date: 2022/12/14 7 3D Antenna Gain Table: Frequency(MHz) Ant1(dBi) 2400 2.43 2455 2.21 2500 1.43 Frequency(MHz) Ant1(dBi) 5150 2.25 5500 2.13 5750 3.48 5925 3.44 SP Antenna Check Sheet Date: 2022/12/14 8 Antenna Vendor information: Walsin Technology Corporation Address: 566-1, Ko-Shi Road , Yang-Mei, Tao-Yuan, 32668, Taiwan SP Antenna Check Sheet Date: 2022/12/14 9 Antenna Vendor : Walsin Technology Corporation Test date: 2022/03/30 Test Engineer: Sam Address of test site: 566-1, Ko-Shi Road , Yang-Mei, Tao-Yuan, 32668, Taiwan Measurement Setup: Reflection Coefficient Measurement: -Instrument : E5071C -Setup: Pattern Measurement: -Chamber : Satimo -Test Program: SPM V15 -Setup Photo(Appendix A) The antenna gain of the antenna model: 2.43 [email protected]~2.5GHz 3.48 [email protected]~5.85GHz Test instrument calibration information: Vendor Model Calibrated Date Calibrated Until Satimo SG24 2021/11/29 2022/11/29 Keysight Network Analyzer E5071C 2020/3/3 2023/3/3 SP Antenna Check Sheet Date: 2022/12/14 10

Test Report

Report No.: RFBAOZ-WTW-P22040585-2 Page No. 1 / 49 Report Format Version: 7.1.0 TEST REPORT CERTIFICATE OF CONFORMITY Standard: 47 CFR FCC Part 15, Subpart C (Section 15.247) Report No.: RFBAOZ-WTW-P22040585-2 FCC ID: 2AUIUWYZECOP Model No.: WYZECOP Received Date: 2022/4/19 Test Date: 2022/5/15 ~ 2022/9/20 Issued Date: 2022/12/26 Applicant: Wyze Labs, Inc Address: 5808 Lake Washington Blvd NE, Ste 300 Kirkland WA United States Of America Issued By: Bureau Veritas Consumer Products Services (H.K.) Ltd., Taoyuan Branch Hsin Chu Laboratory Lab Address: E-2, No.1, Li Hsin 1st Road, Hsinchu Science Park, Hsinchu City 300, Taiwan Test Location: E-2, No.1, Li Hsin 1st Road, Hsinchu Science Park, Hsinchu City 300, Taiwan FCC Registration / Designation Number: 723255 / TW2022 Approved by: , Date: 2022/12/26 May Chen / Manager This test report consists of 49 pages in total. It may be duplicated completely for legal use with the approval of the applicant. It should not be reproduced except in full, without the written approval of our laboratory. The test results in the report only apply to the tested sample. The test results in this report are traceable to the national or international standards. Prepared by : Claire Kuan / Specialist This report is gov erned by, and incorporates by reference, the Conditions of Testing as posted at the date of issuance of this report at http://www.bureauveritas.com/home/about-us/our- business/cps/about-us/terms-conditions/ and is intended for your exclusive use. Any copying or replication of this report to or for any other person or entity, or use of our name or trademark, is permitted only with our prior written permission. This report sets forth our findings solely with respect to the test samples identified herein. The results set forth in this report are not indicative or representative of the quality or characteristics of the lot from which a test sample was taken or any similar or identical product unless specifically and expressly noted. Our report includes all of the tests requested by you and the results thereof based upon the information that you provided to us. Measurement uncertainty is only provided upon request for accredited tests. Statements of conformity are based on simple acceptance criteria without taking measurement uncertainty into account, unless otherwise requested in writing. You have 60 day s from date of issuance of this report to notify us of any material error or omission caused by our negligence or if you require measurement uncertainty; provided, however, that such notice shall be in writing and shall specifically address the issue you wish to raise. A failure to raise such issue within the prescribed time shall constitute your unqualified acceptance of the completeness of this report, the tests conducted and the correctness of the report contents. Report No.: RFBAOZ-WTW-P22040585-2 Page No. 2 / 49 Report Format Version: 7.1.0 Table of Contents Release Control Record ...........................................................................................................................................4 1 Certificate .......................................................................................................................................................5 2 Summary of Test Results ...............................................................................................................................6 2.1 Measurement Uncertainty.............................................................................................................................. 6 2.2 Suppl ement ary Inform ation ............................................................................................................................ 6 3 General Information .......................................................................................................................................7 3.1 General Description ...................................................................................................................................... 7 3.2 Antenna Descri ption of EUT........................................................................................................................... 8 3.3 Channel List ................................................................................................................................................. 9 3.4 Test Mode Applicability and Tested Channel Detail ........................................................................................ 10 3.5 Duty Cycle of Test Signal ............................................................................................................................. 11 3.6 Test Program Used and Operation Descriptions ............................................................................................ 12 3.7 Connection Diagram of E UT and Peripheral Devic es ..................................................................................... 12 3.8 Confi guration of Peripheral Devices and Cable Connections .......................................................................... 13 4 Test Instruments........................................................................................................................................... 14 4.1 RF Output Power ........................................................................................................................................ 14 4.2 Power Spectral Density ............................................................................................................................... 14 4.3 6 dB Bandwidth........................................................................................................................................... 14 4.4 Conducted Out of Band Emissions ............................................................................................................... 14 4.5 AC Power Conducted Emissions...............................................…

Text truncated - open the document above for the full version.

Test Report

Report No.: RFBAOZ-WTW-P22040585 Page No. 1 / 60 Report Format Version: 7.1.0 TEST REPORT CERTIFICATE OF CONFORMITY Standard: 47 CFR FCC Part 15, Subpart C (Section 15.247) Report No.: RFBAOZ-WTW-P22040585 FCC ID: 2AUIUWYZECOP Model No.: WYZECOP Received Date: 2022/4/19 Test Date: 2022/5/26 ~ 2022/9/20 Issued Date: 2022/12/26 Applicant: Wyze Labs, Inc Address: 5808 Lake Washington Blvd NE, Ste 300 Kirkland WA United States Of America Issued By: Bureau Veritas Consumer Products Services (H.K.) Ltd., Taoyuan Branch Hsin Chu Laboratory Lab Address: E-2, No.1, Li Hsin 1st Road, Hsinchu Science Park, Hsinchu City 300, Taiwan Test Location: E-2, No.1, Li Hsin 1st Road, Hsinchu Science Park, Hsinchu City 300, Taiwan FCC Registration / Designation Number: 723255 / TW2022 Approved by: , Date: 2022/12/26 May Chen / Manager This test report consists of 60 pages in total. It may be duplicated completely for legal use with the approval of the applicant. It should not be reproduced except in full, without the written approval of our laboratory. The test results in the report only apply to the tested sample. The test results in this report are traceable to the national or international standards. Prepared by : Luna Yu / Specialist This report is governed by, and incorporates by reference, the Conditions of Testing as posted at the date of issuance of this report at http://www.bureauveritas.com/home/about-us/our- business/cps/about-us/terms-conditions/ and is intended for your exclusive use. Any copying or replication of this report to or for any other person or entity, or use of our name or trademark, is permitted only with our prior written permission. This report sets forth our findings solely with respect to the test samples identified herein. The results set forth in this report are not indicative or representative of the quality or characteristics of the lot from which a test sample was taken or any similar or identical product unless specifically and expressly noted. Our report includes all of the tests requested by you and the results thereof based upon the information that you provided to us. Measurement uncertainty is only provided upon request for accredited tests. Statements of conformity are based on simple acceptance criteria without taking measurement uncertainty into account, unless otherwise requested in writing. You have 60 days from date of issuance of this report to notify us of any material error or omission caused by our negligence or if you require measurement uncertainty; provided, however, that such notice shall be in writing and shall specifically address the issue you wish to raise. A failure to raise such issue within the prescribed time shall constitute your unqualified acceptance of the completeness of this report, the tests conducted and the correctness of the report contents. Report No.: RFBAOZ-WTW-P22040585 Page No. 2 / 60 Report Format Version: 7.1.0 Table of Contents Release Control Record ....................................................................................................................................................... 4 1 Certificate .................................................................................................................................................................... 5 2 Summary of Test Results .......................................................................................................................................... 6 2.1 Measurement Uncertainty ........................................................................................................................................ 6 2.2 Supplementary Information ...................................................................................................................................... 6 3 General Information ................................................................................................................................................... 7 3.1 General Description .................................................................................................................................................. 7 3.2 Antenna Description of EUT ..................................................................................................................................... 8 3.3 Channel List .............................…

Text truncated - open the document above for the full version.

Contact Information

Applicant

Bruce Li(Compliance Expert)
[email protected]8617600403105Fax: n/a

Test Firm

Bureau Veritas CPS(H.K.) Ltd., Taoyuan Branch HsinKen Liu
[email protected]+886-3-2600609Fax: +886-3-2115834

Technical Specifications

#Rule PartsFrequency RangePower Output
315C2.40 GHz - 2.48 GHz8.00 mW
Confidentiality
Long Term
Grant Notes
Power listed is maximum conducted output power. This device supports 20 MHz bandwidth mode for WLAN. The product must be installed such that its antenna(s) can provide a separation distance of at least 20 cm from all persons and must not transmit simultaneously with any other transmitter, except in accordance with FCC multi-transmitter product procedures or as described in this filing. End-users and installers must be provided with antenna installation and transmitter operating conditions for satisfying RF exposure compliance.

Other Applications from Wyze Labs, Inc.

Wyze Cam v4 with BLE and WIFI - FCC ID 2AUIUWYZEC4 - Wyze Labs, Inc.
2AUIUWYZEC4

Wyze Cam v4 with BLE and WIFI

Mar 24, 2024

Equipment Class

DTS - Digital Transmission System
Wyze Cam OG - FCC ID 2AUIUWYZECGSA - Wyze Labs, Inc.
2AUIUWYZECGSA

Wyze Cam OG

Dec 12, 2023

Equipment Class

DTS - Digital Transmission System
Wyze Cam OG, Wyze Cam OG Telephoto 3x - FCC ID 2AUIUWYZECGS - Wyze Labs, Inc.
2AUIUWYZECGS

Wyze Cam OG, Wyze Cam OG Telephoto 3x

Jan 15, 2023

Equipment Class

DTS - Digital Transmission System
Wyze Cam Pan v3 with WiFi - FCC ID 2AUIUWYZECPAN3 - Wyze Labs, Inc.
2AUIUWYZECPAN3

Wyze Cam Pan v3 with WiFi

Jan 09, 2023

Equipment Class

DTS - Digital Transmission System
Wyze Mesh Router Pro - FCC ID 2AUIUWF6ETBMRA - Wyze Labs, Inc.
2AUIUWF6ETBMRA

Wyze Mesh Router Pro

Nov 06, 2022

Equipment Class

NII - Unlicensed National Information Infrastructure TX