2AUIUWYZECGSAWyze Cam OG

Recor d Full-Length Videos Get unlimited full-length video recor dings. Smart A.I. Detection Detect people, packages, vehicles, and more. Back-to-Back Event Recor ding Capture ever yt hing without 5-minute gaps. Exclu siv e Discounts Get exclu siv e discounts on Wyze products. Subscribe or learn more at services.wyze.com. GET BETTER SECURITY WITH FRONT IN THE BOX Indoor Power Adapter × 1 Wall Anchors × 2 Mounting Scr ew × 2 Quick Star t Guide × 1 Wyze Cam OG × 1 USB Cable × 1 Wall Plate × 1 1 White LED Light Lens Microphone Status Light 1 2 3 4 2 3 2 4 5 Speaker Power Cable MicroSD Car d Slot (MicroSD Card not included) Wall Plate SETUP But ton 5 6 7 8 9 7 9 8 SIDEBACK 6 Any changes or modifications not expressly approved by the party responsible for compliance could void the user 's authority to operat e thi s equipment. This device complies with part 15 of t he FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interfer ence, and (2) This device must accept any interfer ence received, including interfer ence that may cause undesir ed operation. This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Par t 15 of t he FCC Rules. These limits are designed to provide reasonable protect ion against harmful interfer ence in a residential installation. This equipment generat es, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interfer ence to radio communications. However , t here is no guarante e that interfer ence will not occur in a particular installation. If this equipment does cause harmful interfer ence to radio or television reception, which can be determined by turning the equipment o and on, the user is encouraged to try to correct the interfer ence by one or more of t he following measur es: FCC WARNING: LIGHT INDICATORS DURING INSTALLATION Solid red light The device is powered on and initializing The device is working properly Solid blue light Flashing red light The device is ready to connect Flashing red & blue lights Connection is in progress Flashing blue light The device is connected and finishing setup 2 Connect the camera to a power outle t and wait for 20 seconds or until the status light flashes red. 1 Download the Wyze app and sign in or create an account. 3 Press and release the SETUP button, then wait 3-5 seconds until there is a voice prompt. SETUP Open the Wyze app and tap the + sign in the top left corner of t he Home tab. T ap Add Device > Cameras > Wyze Cam OG and then follow the instructions. 4 LIGHT INDICATORS AFTER SETUP Solid red light Live str eam is being viewed or a recor ding is in progress The device is working properly and no operations are running Solid blue light Quickly flashing red light Siren is in use Only use the power supply provided. Cet appareil est conforme aux limites d'exposit ion de rayonnement RF ISEDC établies pour un environement non contrôlé. Cet émetteur ne doit pas êtr e co-implanté ou fonctionner en conjonction avec toute autre antenne ou tr ansmetteur. Cet équipement doit êtr e installé et utilisé avec une distance minimale de 20 cm entre le radiateur & votr e corps. T ous changements ou modifications non expressément approuvés par la partie responsable de la conformité peut annuler l'autorité de l'utili sat eur à opérer l' équipement. Le présent appareil est conforme aux CNR d'ISEDC applicables aux appareil s radio exempts de lic ence. L'exploitation est autorisée aux deux conditions suivantes: (1) l'appareil ne doit pas produire de interférence, et (2) l'appareil doit accepter toute interférence radioélectrique su bie, même si l'interférence est susceptible d'en compromettre le fonctionnement. This equipment complies with ISEDC RF radiation exposur e limits set f or th for an uncontrolled environment. This transmitter must not be co-locat ed or operating in conjunction with any other antenna or transmitter . This equipment should be installed and operat ed with a minimum distance of 20 cm between the radiator and your body. Only use the power supply provided. Any changes or modifications not expressly approved by the party responsible for compliance could void the user 's authority to operat e the equipment. ISED RADIATION EXPOSURE STATEMENT: Disclaimer: The products, accessories, user interfaces, etc. illustr at ed in this guide are intended for refer ence only. Due to product updates, the actual product and the illustr ations in this guide may var y. Wyze and Wyze Cam OG ar e trademarks of Wyze Labs, Inc. NEED HELP? Contact our Support Team: ht tp s://wyze.com/support Join the Community: ht tp s://wyze.com/community Scan the QR code to learn more WARRANTY Your Wyze product is covered by a one-year limited warranty. You can view the limited warranty terms at ht tps://wyze.com/return-warranty-policy or request a copy by contacting Wyze at +1 (206) 339-9646. This device complies with ISEDC licence-exempt RSS standard(s). Operation is subje ct to the following two conditions: (1) this device may not cause interfer ence, and (2) this device must accept any interfer ence, including interfer ence that may cause undesir ed operation of t he device. ISED RSS WARNING: This equipment complies with FCC radiation exposur e limits set for th for an uncontrolled environment. This equipment should be installed and operat ed with minimum distance 20 cm between the radiator & your body. This transmitter must not be co-locat ed or operating in conjunction with any other antenna or transmitter . FCC RADIATION EXPOSURE STATEMENT: - Reorient or relocat e the receiving antenna. - Increase the separation between the equipment and receiver . - Connect the equipment into an outle t on a circuit dier ent fr om that to which the receiver is connected. - Consult the dealer or an experienced radio/TV technician for help. Read this manual car efully and save it for future r…

Text truncated - open the document above for the full version.

Applicant Declaration QSF27-14-04 Rev 1.0 Rev. Feb 6, 2023 Page 1 of 1 Original Issue: Jan. 4, 2021 SGS North America Inc. 620 Old Peachtree Road SUITE 100 Suwanee, Georgia 30024 United States Applicant Legal Business Name Wyze Labs, Inc. Address 5808 Lake Washington Blvd NE Ste 300 Kirkland Washington 98033, United States Grantee Code 2AUIU FCC ID 2AUIUWYZECGSA Authorized Contact Name Roy Zhang Contact Email [email protected] Contact Phone 8617600403105 I, the undersigned, certify that I am an authorized signatory for the Applicant and therefore declare; a) in accordance with 47CFR2.911(d), all of the statements herein and the exhibits attached hereto are true and correct to the best of my knowledge and belief. b) in accepting a Grant of Equipment Authorization issued by a TCB, under the authority of the FCC, as a result of the representations made in this application, the Applicant is responsible for: (1) labeling the equipment with the exact FCC ID as specified in this application, (2) compliance statement labeling pursuant to the applicable rules, (3) compliance of the equipment with the applicable technical rules, c) if the Applicant is not the actual manufacturer of the equipment, appropriate arrangements have been made with the manufacturer to ensure that production units of this equipment will continue to comply with the FCC’s technical requirements. d) in accordance with 47 CFR 2.909 and KDB394321, the Applicant has read, understood and agrees to accept that they are the responsible party and agree to abide by their responsibilities as specified under 47 CFR 2.909 and KDB394321. e) in accordance with ISO 17065, FCC KDB641163, FCC KDB610077, KDB394321 and RSP-100, the Applicant has read, understood, accepts and agrees to abide by the post market surveillance requirements. (1) the Applicant understands, accepts and agrees that a sample may be requested for surveillance testing. (2) the Applicant shall make provisions to always have a production sample available upon request by SGS, FCC and/or ISED. (3) the Applicant shall, upon request by SGS, at the Applicant’s expense, provide a production sample of the requested product to SGS, FCC and/or ISED as instructed. The sample shall include all support devices, cables, software, accessories or other hardware or software required for evaluation, review, certification and audit surveillance of products certified by SGS. f) neither the Applicant nor any party to the application is subject to a denial of Federal benefits, that includes FCC benefits, pursuant to Section 5301 of the Anti-Drug Abuse Act of 1988, 21 U.S.C. §862 because of a conviction for possession or distribution of a controlled substance. See 47CFR 1.2002(b) for the definition of a “party” for these purposes. g) the Applicant has read, understood, accepts and agrees to abide by the SGS North America, Inc.(TCB) terms and conditions. Link to CFRs: https://www.fcc.gov/wireless/bureau-divisions/technologies-systems-and-innovation-division/rules-regulations-title-47 Link to KDBs: https://apps.fcc.gov/oetcf/kdb/index.cfm Link to RSP-100: https://www.ic.gc.ca/eic/site/smt-gst.nsf/eng/sf01130.html Link to the Covered List: Covered List [Wyze Labs, Inc.] (“the applicant”) certifies that the equipment for which authorization is sought is not “covered” equipment prohibited from receiving an equipment authorization pursuant to section 2.903 of the FCC rules. [Wyze Labs, Inc.] (“the applicant”) certifies that, as of the date of the filing of the application, the applicant [is not] identified on the Covered list, established pursuant to §1.50002, as an entity producing “covered” equipment. Applicant Signature: Date: 11/29/2023 Print Name: Roy Zhang Title: Certification Senior Manager *NOTE: This declaration cannot be signed by an Agent, it shall be signed by an authorized person listed in the FCC database

UNITED STATES DESIGNATED AGENT LETTER Date: 10/30/2023 TO: Federal Communication Commission Equipment Authorization Branch 7435 Oakland Mills Road Columbia, MID 21046 Applicant U.S. designated agent Company Name: Wyze Labs, Inc. Company Name: Wyz e Labs, Inc. Grantee Code: 2AUIU FRN: 0028796076 Contact Name: Roy Zhang Contact Name: Roy Zhang Address: 5808 Lake Washington Blvd NE Ste 300 Kirkland Address: 5808 Lake Washington Blvd NE Ste 300 Kirkland City/Province/Zip: Washington 98033, United States City/Province/Zip: Washington 98033, United States Telephone: 8617600403105 Telephone: 886-999-3226 Fax : N/A Fax : N/A Email: [email protected] Email: [email protected] Applicable Equipment: FCC ID: 2AUIUWYZECGSA ATTN: Director of Certification: We, < Wyze Labs, Inc.> understand and acknowledge the applicants consent and the designated agent’s obligation to accept service of process in the United States for matters related to the applicable equipment, and at the physical U.S. address and e-mail of the designated agent listed above. We, < Wyze Labs, Inc.> acknowledge the applicant’s acceptance of its obligation to maintain an agent for service of process in the United States for no less than one year after either the grantee has permanently terminated all marketing and importation of the applicable equipment within the U.S., or the conclusion of any Commission-related administrative or judicial proceeding involving the equipment, whichever is later. Name (Printed): Roy Zhang Title: Certification Senior Manager Signature:

Wyze Labs, Inc. Date: 10/30/2022 TO: Federal Communication Commission Equipment Authorization Branch 7435 Oakland Mills Road Columbia, MID 21046 Regarding: FCC ID: 2AUIUWYZECGSA To whom it may concern: We, the undersigned, hereby authorize SGS-CSTC Standards Technical Services Co., Ltd to act on our behalf in all manners relating to application for equipment authorization with respect to the FCC ID above, including signing of all documents relating to these matters. Any and all acts carried out by the agent on our behalf shall have the same effect as acts of our own. We, the undersigned, hereby certify that we are not subject to a denial of federal benefits, that includes FCC benefits, pursuant to Section 5301 of the Anti-Drug Abuse Act of 1988, 21 U.S.C. 853(a). Where our agent signs the application for certification on our behalf, I acknowledge that all responsibility for complying with the terms and conditions for Certification, as specified by SGS North America, Inc., still resides with Wyze Labs, Inc. This authorization is valid until further written notice from the applicant. Sincerely, Print Name: Roy Zhang Title: Certification Senior Manager Signature: On behalf of Company: Wyze Labs, Inc. Telephone: 8617600403105 E-mail: [email protected]

Wyze Labs, Inc. TO: Federal Communication Commission Equipment Authorization Branch 7435 Oakland Mills Road Columbia, MID 21046 Regarding: Confidentiality Request regarding application for FCC ID: 2AUIUWYZECGSA LONG TERM CONFIDENTIALITY Pursuant to 47 CFR Section 0.459 and 0.457 of the commission’s rules, the applicant hereby request confidential treatment of the documents listed below, associated with the certification application referenced above. Schematic(s) Block Diagrams Operational Descriptions The documents above contain proprietary information not released to the public. Public disclosure of this information may prove harmful to the business of the applicant. SHORT TERM CONFIDENTIALITY Additionally, the applicant requests the following documents be held confidential until the device is marketed or 30 days from the grant date, whichever is less. If the device is marketed within aforementioned days of the Grant Date, the applicant will notify the TCB per FCC KDB 726920 D01 Confidentiality Request Procedures. External Photos Internal Photos Test Setup Photos User Manuals Sincerely, Print Name: Roy Zhang Title: Certification Senior Manager Signature: On behalf of Company: Wyze Labs, Inc. Telephone: 8617600403105 E-mail: [email protected]

SGS-CSTC Standards Technical Services Co., Ltd. Shenzhen Branch SZEMC-TRF-A02 Rev.A/0 Page: 1 of 11 Appendix External Photos for SZCR2310003435AT FCC ID: 2AUIUWYZECGSA SGS-CSTC Standards Technical Services Co., Ltd. Shenzhen Branch SZEMC-TRF-A02 Rev.A/0 Page: 2 of 11 EUT Constructional Details (EUT Photos) SGS-CSTC Standards Technical Services Co., Ltd. Shenzhen Branch SZEMC-TRF-A02 Rev.A/0 Page: 3 of 11 SGS-CSTC Standards Technical Services Co., Ltd. Shenzhen Branch SZEMC-TRF-A02 Rev.A/0 Page: 4 of 11 SGS-CSTC Standards Technical Services Co., Ltd. Shenzhen Branch SZEMC-TRF-A02 Rev.A/0 Page: 5 of 11 Adapter 1: Model: GQ06A-050100-ZUU SGS-CSTC Standards Technical Services Co., Ltd. Shenzhen Branch SZEMC-TRF-A02 Rev.A/0 Page: 6 of 11 SGS-CSTC Standards Technical Services Co., Ltd. Shenzhen Branch SZEMC-TRF-A02 Rev.A/0 Page: 7 of 11 Adapter 2: Model: DSA-5PF16-05 FUS 050100U SGS-CSTC Standards Technical Services Co., Ltd. Shenzhen Branch SZEMC-TRF-A02 Rev.A/0 Page: 8 of 11 SGS-CSTC Standards Technical Services Co., Ltd. Shenzhen Branch SZEMC-TRF-A02 Rev.A/0 Page: 9 of 11 Adapter 3: Model: SA0051-0501000UB SGS-CSTC Standards Technical Services Co., Ltd. Shenzhen Branch SZEMC-TRF-A02 Rev.A/0 Page: 10 of 11 SGS-CSTC Standards Technical Services Co., Ltd. Shenzhen Branch SZEMC-TRF-A02 Rev.A/0 Page: 11 of 11 - End of the Appendix -

17.4mm 45° 35.2mm 0.93mm IC: 25466-WYZECGSA FCC ID: 2AUIUWYZECGSA BLE MAC: 7C:7C:B3:7F:A9:AE WIFI MAC: 7C:7C:B3:7F:A9:AE HVINWYZECGSA Model: WYZECGS INPUT: 5V DC, 1A Designed in Seattle • Made in Vietnam Wyze Cam OG QR CODE QR code: 7.5x7.5mm Gilroy Medium 5.5pt Gilroy Semibold 4pt ±0.5 来料方式 3.0 ±0.5 3.0 WYZE OG（模组方案项目） 机身铭牌1.0 厚度: 0.15mm 尺寸: 17.4mm X 35.2mm 材质：黑色合成纸 颜色：白色印刷 Weather Resistance : IP65 Only use the power supply provided. Utilisez uniquement le chargeur fourni. Label location

SGS-CSTC Standards Technical Services Co., Ltd. Shenzhen Branch SZEMC-TRF-A03 Rev.A/0 Page: 1 of 9 Appendix Internal Photos for SZCR2310003435AT FCC ID: 2AUIUWYZECGSA SGS-CSTC Standards Technical Services Co., Ltd. Shenzhen Branch SZEMC-TRF-A03 Rev.A/0 Page: 2 of 9 EUT Constructional Details (EUT Photos) SGS-CSTC Standards Technical Services Co., Ltd. Shenzhen Branch SZEMC-TRF-A03 Rev.A/0 Page: 3 of 9 Yingjiachuang Antenna Yuande Antenna SGS-CSTC Standards Technical Services Co., Ltd. Shenzhen Branch SZEMC-TRF-A03 Rev.A/0 Page: 4 of 9 SGS-CSTC Standards Technical Services Co., Ltd. Shenzhen Branch SZEMC-TRF-A03 Rev.A/0 Page: 5 of 9 SGS-CSTC Standards Technical Services Co., Ltd. Shenzhen Branch SZEMC-TRF-A03 Rev.A/0 Page: 6 of 9 Adapter 1: Model: GQ06A-050100-ZUU SGS-CSTC Standards Technical Services Co., Ltd. Shenzhen Branch SZEMC-TRF-A03 Rev.A/0 Page: 7 of 9 Adapter 2: Model: DSA-5PF16-05 FUS 050100U SGS-CSTC Standards Technical Services Co., Ltd. Shenzhen Branch SZEMC-TRF-A03 Rev.A/0 Page: 8 of 9 Adapter 3: Model: SA0051-0501000UB SGS-CSTC Standards Technical Services Co., Ltd. Shenzhen Branch SZEMC-TRF-A03 Rev.A/0 Page: 9 of 9 - End of the Appendix -

SGS-CSTC Standards Technical Services Co., Ltd. Shenzhen Branch SZEMC-TRF-01 Rev. A/1 Report No.: SZCR231000343504 Page: 1 of 11 Keny Xu EMC Laboratory Manager RF EXPOSURE EVALUATION REPORT Application No.: SZCR2310003435AT Applicant: Wyze Labs, Inc. Address of Applicant: 5808 Lake Washington Blvd NE Ste 300, Kirkland Washington 98033 United States Manufacturer: Wyze Labs, Inc. Address of Manufacturer: 5808 Lake Washington Blvd NE Ste 300, Kirkland Washington 98033 United States Equipment Under Test (EUT): EUT Name: Wyze Cam OG Model No.: WYZECGS Trade Mark: WYZE FCC ID: 2AUIUWYZECGSA Standard(s) : FCC Rules 47 CFR §2.1091 KDB 447498 D04 interim General RF Exposure Guidance v01 Date of Receipt: 2023-10-26 Date of Evaluation: 2023-10-31 to 2023-11-08 Date of Issue: 2023-11-17 Evaluation Result: Pass* * In the configuration evaluated, the EUT complied with the standards specified above. SGS-CSTC Standards Technical Services Co., Ltd. Shenzhen Branch SZEMC-TRF-01 Rev. A/1 Report No.: SZCR231000343504 Page: 2 of 11 Revision Record Version Chapter Date Modifier Remark 01 2023-11-17 Original Authorized for issue by: Charlie Dai/Project Engineer Eric Fu/Reviewer SGS-CSTC Standards Technical Services Co., Ltd. Shenzhen Branch SZEMC-TRF-01 Rev. A/1 Report No.: SZCR231000343504 Page: 3 of 11 2 Contents Page 1 Cover Page ................................................................................................................................................ 1 2 Contents .................................................................................................................................................... 3 3 General Information .................................................................................................................................. 4 3.1 General Description of E.U.T. ............................................................................................................ 4 3.2 Details of E.U.T. ................................................................................................................................. 4 3.3 Separation Distance ........................................................................................................................... 5 3.4 Test Location ...................................................................................................................................... 6 3.5 Test Facility ........................................................................................................................................ 6 3.6 Deviation from Standards ................................................................................................................... 6 3.7 Abnormalities from Standard Conditions ........................................................................................... 6 4 FCC Radiofrequency radiation exposure limits .................................................................................... 7 4.1 Blanket 1 mW Blanket Exemption ...................................................................................................... 7 4.2 MPE-based Exemption ...................................................................................................................... 7 4.3 SAR-based Exemption ....................................................................................................................... 8 5 Measurement and Calculation ............................................................................................................... 10 5.1 Maximum transmit power ................................................................................................................. 10 5.2 RF Exposure Calculation ................................................................................................................. 11 SGS-CSTC Standards Technical Services Co., Ltd. Shenzhen Branch SZEMC-TRF-01 Rev. A/1 Report No.: SZCR231000343504 Page: 4 of 11 3 General Information 3.1 General Description of E.U.T. Product Type: Portable device Mobile device Fixed device 3.2 Details of E.U.T. Power supply: Powered by adapter. Adapter 1: Model: GQ06A-050100-ZUU Input: AC100-240V; 50/60Hz; 0.3A Max; Output: DC 5V/1A Adapter 2: Model: DSA-5PF16-05 FUS 050100U Input: AC100-240V; 50/60Hz; 0.2A Max; Output: DC 5V/1A Adapter 3: Model: SA0051-0501000UB Input: AC100-240V; 50/60Hz; 0.2A Max; Output: DC 5V/1A Cable(s): Camera built-in USB cable 17cm unshielded USB cable: 180cm unshielded Cable Loss (for RF conducted test): 0.9dBi For BLE: Operation Frequency: 2402MHz to 2480MHz Bluetooth Version: V5.0 LE Modulation Type: GFSK Data Rate: 1Mbps, 2Mbps Number of Channels: 40 Channel Spacing: 2MHz Antenna Type: FPC Antenna Antenna Gain: YingJiaChuang Antenna: 2.42dBi; Yuande Antenna: 0.96dBi. SGS-CSTC Standards Technical Services Co., Ltd. Shenzhen Branch SZEMC-TRF-01 Rev. A/1 Report No.: SZCR231000343504 Page: 5 of 11 For 2.4G WIFI: Operation Frequency: 802.11b/g/n(HT20): 2412MHz to 2462MHz;802.11n(HT40): 2422MHz to 2452MHz Modulation Type: 802.11b: DSSS (CCK, DQPSK, DBPSK);802.11g/n: OFDM (64QAM, 16QAM, QPSK, BPSK) Number of Channels: 802.11b/g/n(HT20):11;802.11n(HT40):7 Channel Spacing: 5MHz Antenna Type: FPC Antenna Antenna Gain: YingJiaChuang Antenna: 2.42dBi; Yuande Antenna: 0.96dBi. Remark 1:The information in this section is provided by the applicant or manufacturer, SGS is not liable to the accuracy, suitability, reliability or/and integrity of the information. Remark2: There are two antenna suppliers for the product, YingJiaChuang and Yuande, both of which have the same type and size. 3.3 Separation Distance Minimum test separation distance: 20cm Remark: This minimum test separation distance is determined by the smallest distance from the antenna and radiating structures or outer surface of the device, according to the host form factor, exposure conditions and platform requirements, to any part of the body or extremity of a user or bystander. SGS-CSTC Stand…

Text truncated - open the document above for the full version.

深圳市英佳创电子科技有限公司 http://www.szsyjc.com 第 1 页 共 19 页 总部地址：深圳市光明区马田街道油麻岗路 11 号宏域光明谷 C 栋 东莞分厂：东莞市桥头镇石水口银河三路 2 号英佳创产业园 杭州办事处：杭州市滨江区物联网街 369 号大华江虹国际创新园 B 栋 212 绵阳办事处：四川省绵阳市高新区绵兴东路 35 号万向高新国际 4F-34 号 电话：0755-27810060 传真：0755-27810057网址：http://www.szsyjc.com CUSTOMER NAME 客户名称 CUSTOMER P/N 客户料号 3.014.001.0006 PART NAME 品 名 2.4G Black FPC L=30MM P/ N 料 号 YJC-6N030-B22 APPROVAL REV. 版 次 V2.0 DELIVERY DATE 送样日期 2023 年 08 月 11 日 PREPARED BY 承 办 殷飞杰 CHECKED BY 审 核 方文锋 APPROVED BY 核 准 肖 汉 深圳市英佳创电子科技有限公司 http://www.szsyjc.com 第 4 页 共 19 页 Antenna Photo： 深圳市英佳创电子科技有限公司 http://www.szsyjc.com 第 5 页 共 19 页 天线技术参数及环境测试： 电气技术参数 电 性 能 指 标 ElectricalSpecifications 频率范围 2400-2500MHz FrequencyRange 2400-2500MHz 电压驻波比＜2.0VSWR＜2.0 输入阻抗50 ΩInputImpedance50 Ω 方向全向DirectionAll 增益2. 0±0.5 dBiGain2. 0±0.5 dBi 机 械 指 标 MechanicalSpecifications 天线颜色黑色AntennaColorBlack 接口形式XD-4InputconnectorXD-4 线材长度30 mmCablelength30 mm 工作温度-30°C~+ 70 °C Working Temperature -30°C~+ 70 °C 工作湿度20 %~80%WorkingHumidity20 %~80% 深圳市英佳创电子科技有限公司 http://www.szsyjc.com 第 6 页 共 19 页 Antenna Photo： Test Photo： Location 深圳市英佳创电子科技有限公司 http://www.szsyjc.com 第 7 页 共 19 页 2D .3D Data（2.4G） Phi 0 2D :Phi 90 2D Theta 90 2D 3D 2400 Frequency (MHz）Efficiency(%)Gain.(dBi) 2400MHz 52.372.04 2410MHz 60.742.42 2420MHz 54.762.13 2430MHz 58.982.25 2440MHz 57.642.23 2450MHz 57.972.21 2460MHz 55.092.17 2470MHz 58.322.32 2480MHz 54.642.07 2490MHz 52.672.04 2500MHz 52.362.02 深圳市英佳创电子科技有限公司 http://www.szsyjc.com 第 8 页共 19 页 3D2450 3D2500 深圳市英佳创电子科技有限公司 http://www.szsyjc.com 第 9 页 共 19 页 OTA Data： ItemMeasurementBandChannelFrequencyTotal 1TRPWIFI_B(1M)1241219.65 2TRPWIFI_B(1M)6243720.5 3TRPWIFI_B(1M)11246219.4 4TIS(EIRP)WIFI_B(11M)12412-87.34 5TIS(EIRP)WIFI_B(11M)62437-85.34 6TIS(EIRP)WIFI_B(11M)112462-82.47 7TRPWIFI_G(6M)1241217.82 8TRPWIFI_G(6M)6243718.06 9TRPWIFI_G(6M)11246217.88 10TIS(EIRP)WIFI_G(54M)12412-73.31 11TIS(EIRP)WIFI_G(54M)62437-73.53 12TIS(EIRP)WIFI_G(54M)112462-72.48 13TRPWIFI_N_ISM(6.5M)1241216.95 14TRPWIFI_N_ISM(6.5M)6243717.41 15TRPWIFI_N_ISM(6.5M)11246217.19 16TIS(EIRP)WIFI_N_ISM(65M)12412-71.94 17TIS(EIRP)WIFI_N_ISM(65M)62437-71.2 18TIS(EIRP)WIFI_N_ISM(65M)112462-71.12

SGS-CSTC Standards Technical Services Co., Ltd. Shenzhen Branch SZEMC-TRF-01 Rev. A/1 Report No.: SZCR231000343502 Page: 1 of 109 Keny Xu EMC Laboratory Manager TEST REPORT Application No.: SZCR2310003435AT Applicant: Wyze Labs, Inc. Address of Applicant: 5808 Lake Washington Blvd NE Ste 300, Kirkland Washington 98033 United States Manufacturer: Wyze Labs, Inc. Address of Manufacturer: 5808 Lake Washington Blvd NE Ste 300, Kirkland Washington 98033 United States Equipment Under Test (EUT): EUT Name: Wyze Cam OG Model No.: WYZECGS Trade Mark: WYZE FCC ID: 2AUIUWYZECGSA Standard(s) : 47 CFR Part 15, Subpart C 15.247 Date of Receipt: 2023-10-26 Date of Test: 2023-10-31 to 2023-11-02 Date of Issue: 2023-11-17 Test Result: Pass* * In the configuration tested, the EUT complied with the standards specified above. SGS-CSTC Standards Technical Services Co., Ltd. Shenzhen Branch SZEMC-TRF-01 Rev. A/1 Report No.: SZCR231000343502 Page: 2 of 109 Revision Record Version Chapter Date Modifier Remark 01 2023-11-17 Original Authorized for issue by: Charlie Dai/Project Engineer Eric Fu/Reviewer SGS-CSTC Standards Technical Services Co., Ltd. Shenzhen Branch SZEMC-TRF-01 Rev. A/1 Report No.: SZCR231000343502 Page: 3 of 109 2 Test Summary Radio Spectrum Technical Requirement Item Standard Method Requirement Result Antenna Requirement 47 CFR Part 15, Subpart C 15.247 N/A 47 CFR Part 15, Subpart C 15.203 & 15.247(b)(4) Pass Radio Spectrum Matter Part Item Standard Method Requirement Result Conducted Emissions at AC Power Line (150kHz-30MHz) 47 CFR Part 15, Subpart C 15.247 ANSI C63.10 (2013) Section 6.2 47 CFR Part 15, Subpart C 15.207 Pass Conducted Peak Output Power ANSI C63.10 (2013) Section 11.9.1 47 CFR Part 15, Subpart C 15.247(b)(3) Pass Minimum 6dB Bandwidth ANSI C63.10 (2013) Section 11.8.1 47 CFR Part 15, Subpart C 15.247a(2) Pass Power Spectrum Density ANSI C63.10 (2013) Section 11.10.2 47 CFR Part 15, Subpart C 15.247(e) Pass Conducted Band Edges Measurement ANSI C63.10 (2013) Section 11.13.3.2 47 CFR Part 15, Subpart C 15.247(d) Pass Conducted Spurious Emissions ANSI C63.10 (2013) Section 11.11 47 CFR Part 15, Subpart C 15.247(d) Pass Radiated Emissions which fall in the restricted bands ANSI C63.10 (2013) Section 6.10.5 47 CFR Part 15, Subpart C 15.205 & 15.209 Pass Radiated Spurious Emissions Below 1GHz ANSI C63.10 (2013) Section 6.4,6.5 47 CFR Part 15, Subpart C 15.205 & 15.209 Pass Radiated Spurious Emissions Above 1GHz ANSI C63.10 (2013) Section 6.6 47 CFR Part 15, Subpart C 15.205 & 15.209 Pass Remark for WYZECGS: There are two antenna suppliers for the product, YingJiaChuang and Yuande, both of which have the same type and size. Considering the difference in antenna gain, the Radiated Spurious Emissions Above 1GHz and Radiated Emissions which fell in the restricted band were tested with both antennas. SGS-CSTC Standards Technical Services Co., Ltd. Shenzhen Branch SZEMC-TRF-01 Rev. A/1 Report No.: SZCR231000343502 Page: 4 of 109 3 Contents Page 1 Cover Page ................................................................................................................................................ 1 2 Test Summary ........................................................................................................................................... 3 3 Contents .................................................................................................................................................... 4 4 General Information .................................................................................................................................. 6 4.1 Details of E.U.T. ................................................................................................................................. 6 4.2 Description of Support Units .............................................................................................................. 6 4.3 Measurement Uncertainty .................................................................................................................. 7 4.4 Test Location ...................................................................................................................................... 8 4.5 Test Facility ........................................................................................................................................ 8 4.6 Deviation from Standards ................................................................................................................... 8 4.7 Abnormalities from Standard Conditions ........................................................................................... 8 5 Equipment List .......................................................................................................................................... 9 6 Radio Spectrum Technical Requirement ............................…

Text truncated - open the document above for the full version.