2AUOUC6DTablet with BT, WIFI, WCDMA, LTE and NFC

1 C6D User Manual 2 Product Overview 3 Assembling MicroSD Card (if applicable) 1. Pull out the card holder on the left side of the tablet. 2. Put the microSD card into the microSD card slot of the card tray, and then push the card tray into the tablet. Assembling SIM Card (if applicable) 1. Pull out the card holder on the left side of the tablet. 2. Put the SIM card into the SIM card slot of the card tray, and then push the card tray into the tablet. Assembling Battery This device has a Non-removable battery,Do not attempt to remove the battery or try to disassemble the tablet as this could result in personal injury. Getting Started 4 Turning Tablet On/Off To turn on tablet 1. Press and hold the power key for a few seconds until you see the RHINO welcome screen. To turn off tablet  1. Press and hold the power key and volume up 2. Select Power Off. Unlocking the Screen The screen is locked by default when you turn on the tablet. To unlock the screen- 1. Press the power key. 2. Place finger on center of screen and swipe up. 3. If you previously set up an unlock security option, draw a pattern, use your fingerprint, or enter PIN. Locking the Screen 5 To lock the screen, press the power key. Note: It is recommended to lock the screen to protect your information and reduce battery usage. You can set up your tablet to automatically lock after a certain period of time. To do so, press finger on bottom-center of screen, and swipe up to open All Apps. Tap Settings → Display → Screen timeout. Fingerprint Sensor Security Option To set up the Fingerprint Security Option, press finger on bottom-center of screen, and swipe up to open All Apps. Tap Settings → Security → Fingerprint and follow the on-screen instructions. Note: After setting up the fingerprint option, please allow the tablet display to go to sleep naturally (default is 1 minute) before the first use. This process must be followed every time a fingerprint is changed. Using Touch Screen All of the functions of the tablet, except for power and volume, are performed on the touch screen. The following finger actions may help you easily understand how to use the touch screen. 6  Tap: With your finger, touch an item (ie: application or widget) to run it, or access a menu or option.  Double tap: Tap an item twice with your finger.  Drag: Tap and hold your finger on an item, then slide it without losing contact with the screen.  Swipe: Place your finger on an empty space of the screen and move the screen up or down or left or right.  Pinch: Place two fingers on the screen and move them apart to zoom into a picture, document or webpage; or move them together to zoom out.  Select and tap: Tap an item in the list of options available.  Press and hold: Press a key or any item for a few seconds until a list of options appears. Cautions:  Do not use sharp tools that can scratch the touch screen. 7 Key Functions Back Key Tap to return to the previous screen and exit the running application. Tap to close the on-screen keyboard in text input mode. Home Key Tap to return to the main screen. Tap and hold to open the Google search. Recent Apps Key Tap to open the applications list used recently. Screen Orientation For optimal viewing experience, the screen orientation changes automatically depending on how you hold the tablet. 8 Note: To enable or disable auto-rotate, place finger on top-center of screen, and slide down to view Status and Notification panel, then tap the Auto-rotate icon. Status Bar The Status bar at the top of the screen includes notifications from various apps, current time, and the states of various items such as battery status, WLAN status, Signal status, and so on. 9 Status and Notification Panel The Status panel displays status icons to show the current state of your tablet, such as battery charging progress, alarms, Bluetooth, and so on. The Notification panel displays notification icons to inform you of new email, messages, and so on. To view both panels, place finger on top-center of screen, and slide down, then tap an icon to view details. 10 Apps and Widgets Apps: Software that allows you to perform a specific task. Your tablet is preloaded with a variety of applications, and additional applications can be downloaded from the Play Store. Widgets: A small application which resides on the home screen and provides quick and easy access to information. Connecting to The Internet Using Wi-Fi Note: The range and quality of the WiFi signal is affected by the distance between the tablet and the wireless router, the number of connected devices, infrastructure, and objects through which the signal is transmitted. 1. Press finger on bottom-center of screen and swipe up to open All Apps. 2. Tap Settings → Network & internet → Internet →Wi-Fi. 3. Drag the slider to the On position. 4. Tablet will scan for WLAN networks in range. 5. Tap the network you want to connect to. 6. Type a password (if connecting to a secure network). 11 7. Tap Connect to connect to the selected WiFi network. Connecting to The Internet Using Mobile Broadband 1. Press finger on bottom-center of screen and swipe up to open All Apps. 2. Tap Settings → Network & internet → Internet→Wi-Fi. 3. Drag the slider to the Off position. 4. The tablet will search for the carrier signal and connect to the network. When the tablet is connected to a mobile broadband network, the network type appears in the status bar. Note: On the LTE/HSPA+ models, if both WiFi and mobile broadband networks are available, the tablet gives priority to WiFi connection. Tablet Maintenance/Safety The following list shows how to maintain your tablet, together with precautions to take.  Keep your tablet and its accessories out of the reach of pets.  If children use the tablet, make sure that they use it properly. 12  Maintain your tablet in dry conditions and keep it within normal operating temperatures.  Do not try to dry your tablet in a microwave oven. If you do, sparks can occur and cause an…

Text truncated - open the document above for the full version.

Rhino Mobility LLC To: Federal Communications Commission Date: 2023/09/20 7435 Oakland Mills Road Columbia, MD 21046 USA Attestation Section 2.911(d)(5)(i) and Section 2.911(d)(5)(ii) (KDB 986446 D01 Covered Equipment) Rhino Mobility LLC (“the applicant”) certifies that the equipme nt for which authorization is sought is not “covered” equipment prohibited from receiving an equipment authorization pursuant to section 2.903 of the FCC rules. Rhino Mobility LLC (“the applicant”) certifies that, as of the date of the filing of the application, the applicant is not identified on the Covered List as an entity producing “covered” equipment. Type of Equipment subject to FCC Certification: Tablet FCC ID: 2AUOUC6D If you have any questions, please feel free to contact me Contact Person: Saqib Ghouri Position in the Company: Director Date of Signature: 2023-09-20 ___________________________ Signatory (signature of the applicant) Section 2.911(d)(5)(i) Section 2.911(d)(5)(ii)

Rhino Mobility LLC To: Federal Communications Commission Date: 2023/09/20 7435 Oakland Mills Road Columbia, MD 21046 USA Attestation Certification designating a U.S. Agent for Service of Process Section 2.911(d)(7) (KDB 986446 D01 Covered Equipment) Rhino Mobility LLC as required by section 2.911(d)(7), designate below contact located in the United States for purposes of acting as the applicant’s agent for service of process. The applicant also acceptance to maintain an agent for no less than one year after the grantee has terminated all marketing and importation or the conclusion of any Commission-related proceeding involving the equipment. Type of Equipment subject to FCC Certification: Tablet FCC ID: 2AUOUC6D FRN: 0028837490 Sincerely yours, Applicant/Grantee US Agent _________________ ___________________ (Signature) (Signature) Rhino Mobility LLC Rhino Mobility LLC Saqib Ghouri Saqib Ghouri Director Director [email protected] [email protected] 8 The Green, Suite A, Dover, Delaware, 19901, USA

Declaratio n Letter Here by , we, Rhino Mobility LLC, declare that model C6D (Original model is C6) only changed Product Name, Model Name, FCC ID, SW version which disabled voice, GSM and 2G functions, comparing with the original C6. All other functions/features/specs are the same as before. Rhino Mobility LLC Name: Saqib Ghouri Title: Director, Technical Account Management Signature: Date: 09-08-2023

Rhino Mobility LLC Date: 2023/09/20 To: Federal Communications Commission, Authorization & Evaluation Division, 7435 Oakland Mills Road, Columbia, MD 21046 To Whom It May Concern: The Rhino Mobility LLC, the undersigned, hereby authorizes Mrs. Wendy Zhan from Shenzhen Morlab Communications Technology Co., Ltd., to act on the behalf of the Rhino Mobility LLC solely in matters relating to the application for an FCC equipment authorization for FCC ID: 2AUOUC6D including the signing of documents in connection with this Application. Necessary acts carried out Shenzhen Morlab Communications Technology Co., Ltd. on our behalf of the Rhino Mobility LLC in connection with the Application shall have the same effect as acts of the Rhino Mobility LLC. Rhino Mobility LLC also hereby certify that no party to this application is subject to a denial of benefits, including FCC benefits, pursuant to Section 5301 of the Anti-Drug Abuse Act of 1988, 21 U.S.C. 862. Thank you for your attention to this matter. Yours Sincerely, Signatory: Contact name: Saqib Ghouri Title: Director Tel: 7866573080 Email: [email protected] Company name: Rhino Mobility LLC

Rhino Mobility LLC Date: 2023/09/20 To: Federal Communications Commission, Authorization & Evaluation Division, 7435 Oakland Mills Road, Columbia, MD 21046 Re: Request of Confidentiality for FCC ID: 2AUOUC6D To Whom it may concern: Pursuant to sections 0.457 and 0.459 of Commission’s Rules (CFR 47), and Section 552(b)(4) of the Freedom of Information Act, Rhino Mobility LLC hereby requests confidentiality and treatment of certain information accompanying this application. The materials contain trade secrets and proprietary information not customarily released to the public. The public disclosure of these matters might be harmful to the Applicant and provide unjustified benefits to its competitors. We are also hereby request Short-Term Confidentiality for 180 days from grant date as outlined in Public Notice DA04-1705. This provision will give Rhino Mobility LLC temporary confidentiality of commercially sensitive information prior to product release. The requested Permanent and Short-Term Confidential exhibits are listed as follows: PERMANENT AND SHORT-TERM CONFIDENTIAL LIST Item Exhibit Description PERMANENT 1 Block Diagram 2 Operational Description 3 Schematics 4 BOM 5 Tune up procedure SHORT-TERM 6 External Photos 7 Internal Photos 8 Test-Setup Photos 9 User Manual The Applicant understands that pursuant to Rule 0.457, disclosure of this application and all accompanying documentations, where applicable, will not be made public before the date of the Grant for this application. Signatory： Contact name: Saqib Ghouri Title: Director Tel: 7866573080 Email: [email protected] Company name: Rhino Mobility LLC

Rhino Mobility LLC UNII Declaration Letter We have declared below featured for FCC equipment authorization, device FCC ID: 2AUOUC6D (1) DFS Device -- Master, Client with Radar detection capability , Client without radar detection capability, N/A (2) Active / Passive Scanning , adhoc mode access point capability Frequency Band (MHz) Active Scanning (the device can transmit a probe (beacon)) Passive scanning (where the device is can listen only with no probes) Ad Hoc Mode capability Access point capability 2412 – 2462 MHz Yes, No Yes, No Yes, No Yes, No 2422 – 2452 MHz Yes, No Yes, No Yes, No Yes, No 5745 – 5825 MHz Yes, No Yes, No Yes, No Yes, No 5755 – 5795 MHz Yes, No Yes, No Yes, No Yes, No 5180 – 5240 MHz Yes, No Yes, No Yes, No Yes, No 5190 – 5230 MHz Yes, No Yes, No Yes, No Yes, No 5260 – 5320 MHz Yes, No Yes, No Yes, No Yes, No 5270 – 5310 MHz Yes, No Yes, No Yes, No Yes, No 5500 – 5700 MHz Yes, No Yes, No Yes, No Yes, No 5510 – 5670 MHz Yes, No Yes, No Yes, No Yes, No (3) Country code selection ability - Yes , No If no, pls explain how was implemented : Country is selected as US by default and user can not change the country code. (4) Meet 15.202 requirement - Yes , No , pls check below : A master device is defined as a device operating in a mode in which it has the capability to transmit without receiving an enabling signal. In this mode it is able to select a channel and initiate a network by sending enabling signals to other devices A client device is defined as a device operating in a mode in which the transmissions of the device are under control of the master. A device in client mode is not able to initiate a network. (5) For client devices that have software configuration control to operate in different modes (active scanning in some and passive scanning in others) in different bands (devices with multiple equipment classes or those that operate on non-DFS frequencies) or modular devices which configure the modes of operations through software, the application must provide software and operations description on how the software and / or hardware is implemented to ensure that proper operations modes can not be modified by end user or an installer. Apply , No Apply , (If apply , pls help to provide explanation on how it was implement (By hardware or software , and how software was controlled) The device configuration can not be modified by user as program is not exposed to user by any means. Hardware does not allow USB connection for user which is must to change the configuration. If you have any questions, please feel free to contact me at the address shown below. Signatory: Contact name: Saqib Ghouri Title: Director Tel: 7866573080 Email: [email protected] Company name: Rhino Mobility LLC

FCC ID: 2AUOUC6D External Photos 1.EUT front view 2.EUT rear view 3.EUT left side view 4.EUT right side view 5.EUT top view 6.EUT bottom view 7.Accessories

1、 Label 2、 Label location(on the back)

FCC ID: 2AUOUC6D Internal Photos 1.EUT uncover view 2. Antenna view NFC Antenna WWAN Main Antenna WWAN Aux Antenna BT/2.4G WIFI/5G WIFI Antenna

MORLAB Shenzhen Morlab Communications Technology Co., Ltd. FL.1-3, Building A, FeiYang Science Park, No.8 LongChang Road, Block67, BaoAn District, ShenZhen , GuangDong Province, P. R. China Tel: 86-755-36698555 Fax: 86-755-36698525 Http://www.morlab.cn E-mail: [email protected] REPORT No.：SZ23090065S01 Annex C Plots of System Performance Check Test Laboratory: Shenzhen Morlab Communications Technology Co., Ltd. Date: 2023.4.30 System Check_750MHz_Head Communication System: UID 0, CW (0); Frequency: 750 MHz;Duty Cycle: 1:1 Medium: HSL_750 Medium parameters used: f = 750 MHz; σ = 0.917 S/m; ε r = 42.238; ρ = 1000 kg/m 3 Ambient Temperature：23.2 °C; Liquid Temperature：22.1 °C DASY5 Configuration: - Probe: EX3DV4 - SN7608; ConvF(10.45, 10.45, 10.45) @ 750 MHz; Calibrated: 2023.3.15 - Sensor-Surface: 2mm (Mechanical Surface Detection) - Electronics: DAE4 Sn480; Calibrated: 2022.6.22 - Phantom: SAM 2; Type: QD000P40CC; Serial: TP:1464 - Measurement SW: DASY52, Version 52.10 (4); SEMCAD X Version 14.6.14 (7501) CW750/Area Scan (81x81x1): Interpolated grid: dx=1.500 mm, dy=1.500 mm Maximum value of SAR (interpolated) = 2.43 W/kg CW750/Zoom Scan (5x5x7)/Cube 0: Measurement grid: dx=8mm, dy=8mm, dz=5mm Reference Value = 51.31 V/m; Power Drift = 0.04 dB Peak SAR (extrapolated) = 3.41 W/kg SAR(1 g) = 2.24 W/kg; SAR(10 g) = 1.49 W/kg Maximum value of SAR (measured) = 2.43 W/kg 0 dB = 2.43 W/kg MORLAB Shenzhen Morlab Communications Technology Co., Ltd. FL.1-3, Building A, FeiYang Science Park, No.8 LongChang Road, Block67, BaoAn District, ShenZhen, GuangDong Province, P. R. China Tel: 86-755-36698555 Fax: 86-755-36698525 Http://www.morlab.cn E-mail: [email protected] REPORT No.：SZ23090065S01 Test Laboratory: Shenzhen Morlab Communications Technology Co., Ltd. Date: 2023.05.01 System Check_750MHz_Head Communication System: UID 0, CW (0); Frequency: 750 MHz;Duty Cycle: 1:1 Medium: HSL_750 Medium parameters used: f = 750 MHz; σ = 0.906 S/m; ε r = 42.365; ρ = 1000 kg/m 3 Ambient Temperature：23.2 °C; Liquid Temperature：22.5 °C DASY5 Configuration: - Probe: EX3DV4 - SN7608; ConvF(10.45, 10.45, 10.45) @ 750 MHz; Calibrated: 2023.3.15 - Sensor-Surface: 2mm (Mechanical Surface Detection) - Electronics: DAE4 Sn480; Calibrated: 2022.6.22 - Phantom: SAM 2; Type: QD000P40CC; Serial: TP:1464 - Measurement SW: DASY52, Version 52.10 (4); SEMCAD X Version 14.6.14 (7501) CW 750/Area Scan (81x81x1): Interpolated grid: dx=1.500 mm, dy=1.500 mm Maximum value of SAR (interpolated) = 2.02 W/kg CW 750/Zoom Scan (5x5x7)/Cube 0: Measurement grid: dx=8mm, dy=8mm, dz=5mm Reference Value = 47.21 V/m; Power Drift = 0.04 dB Peak SAR (extrapolated) = 2.23 W/kg SAR(1 g) = 2.28 W/kg; SAR(10 g) = 1.43 W/kg Maximum value of SAR (measured) = 2.11 W/kg 0 dB = 2.02 W/kg MORLAB Shenzhen Morlab Communications Technology Co., Ltd. FL.1-3, Building A, FeiYang Science Park, No.8 LongChang Road, Block67, BaoAn District, ShenZhen, GuangDong Province, P. R. China Tel: 86-755-36698555 Fax: 86-755-36698525 Http://www.morlab.cn E-mail: [email protected] REPORT No.：SZ23090065S01 Test Laboratory: Shenzhen Morlab Communications Technology Co., Ltd. Date: 2023.5.5 System Check_900MHz_Head Communication System: UID 0, CW (0); Frequency: 900 MHz;Duty Cycle: 1:1 Medium: HSL_900 Medium parameters used: f = 900 MHz; σ = 0.953 S/m; ε r = 42.276; ρ = 1000 kg/m 3 Ambient Temperature：23.2 °C; Liquid Temperature：22.2 °C DASY5 Configuration: - Probe: EX3DV4 - SN7608; ConvF(10, 10, 10) @ 900 MHz; Calibrated: 2023.3.15 - Sensor-Surface: 2mm (Mechanical Surface Detection) - Electronics: DAE4 Sn480; Calibrated: 2022.6.22 - Phantom: SAM 2; Type: QD000P40CC; Serial: TP:1464 - Measurement SW: DASY52, Version 52.10 (4); SEMCAD X Version 14.6.14 (7501) CW900/Area Scan (71x71x1): Interpolated grid: dx=1.500 mm, dy=1.500 mm Maximum value of SAR (interpolated) = 1.84 W/kg CW900/Zoom Scan (5x5x7)/Cube 0: Measurement grid: dx=8mm, dy=8mm, dz=5mm Reference Value = 43.63 V/m; Power Drift = -0.04 dB Peak SAR (extrapolated) = 2.51 W/kg SAR(1 g) = 2.82 W/kg; SAR(10 g) = 1.85 W/kg Maximum value of SAR (measured) = 1.79 W/kg 0 dB = 1.79 W/kg MORLAB Shenzhen Morlab Communications Technology Co., Ltd. FL.1-3, Building A, FeiYang Science Park, No.8 LongChang Road, Block67, BaoAn District, ShenZhen, GuangDong Province, P. R. China Tel: 86-755-36698555 Fax: 86-755-36698525 Http://www.morlab.cn E-mail: [email protected] REPORT No.：SZ23090065S01 Test Laboratory: Shenzhen Morlab Communications Technology Co., Ltd. Date: 2023.05.06 System Check_900MHz_Head Communication System: UID 0, CW (0); Frequency: 900 MHz;Duty Cycle: 1:1 Medium: HSL_900 Medium parameters used: f = 900 MHz; σ = 0.965 S/m; ε r = 42.235; ρ = 1000 kg/m 3 Ambient Temperature：23.2 °C; Liquid Temperature：22.4 °C DASY5 Configuration: - Probe: EX3DV4 - SN7608; ConvF(10, 10, 10) @ 900 MHz; Calibrated: 2023.3.15 - Sensor-Surface: 2mm (Mechanical Surface Detection) - Electronics: DAE4 Sn480; Calibrated: 2022.6.22 - Phantom: SAM 2; Type: QD000P40CC; Serial: TP:1464 - Measurement SW: DASY52, Version 52.10 (4); SEMCAD X Version 14.6.14 (7501) CW900/Area Scan (71x71x1): Interpolated grid: dx=1.500 mm, dy=1.500 mm Maximum value of SAR (interpolated) = 1.54 W/kg CW900/Zoom Scan (5x5x7)/Cube 0: Measurement grid: dx=8mm, dy=8mm, dz=5mm Reference Value = 33.63 V/m; Power Drift = -0.04 dB Peak SAR (extrapolated) = 2.21 W/kg SAR(1 g) = 2.79 W/kg; SAR(10 g) = 1.81 W/kg Maximum value of SAR (measured) = 1.29 W/kg 0 dB = 1.54 W/kg MORLAB Shenzhen Morlab Communications Technology Co., Ltd. FL.1-3, Building A, FeiYang Science Park, No.8 LongChang Road, Block67, BaoAn District, ShenZhen, GuangDong Province, P. R. China Tel: 86-755-36698555 Fax: 86-755-36698525 Http://www.morlab.cn E-mail: [email protected] REPORT No.：SZ23090065S01 Test Laboratory: Shenzhen Morlab Communications Technology Co., Ltd. Date: 2023.9.11 System Check_900MHz_Head Communication System: UID 0, CW (0); Frequency: 900 MHz;Duty Cycle: 1:1 Medium: HSL_900 Medium parameters used: f…

Text truncated - open the document above for the full version.

MORLAB Shenzhen Morlab Communications Technology Co., Ltd. FL.1-3, Building A, FeiYang Science Park, No.8 LongChang Road, Block67, BaoAn District, ShenZhen , GuangDong Province, P. R. China Tel: 86-755-36698555 Fax: 86-755-36698525 Http://www.morlab.cn E-mail: [email protected] REPORT No.：SZ23090065S01 Annex D Plots of Maximum SAR Test Results Test Laboratory: Shenzhen Morlab Communications Technology Co., Ltd. Date: 2023.4.25 WCDMA Band II_RMC 12.2Kbps_Back Side_10mm_Ch9400 Communication System: UID 0, UMTS-FDD (0); Frequency: 1880 MHz;Duty Cycle: 1:1 Medium: HSL_1900 Medium parameters used: f = 1880 MHz; σ = 1.373 S/m; ε r = 39.767; ρ = 1000 kg/m 3 Ambient Temperature：23.2 °C; Liquid Temperature：22.1 °C DASY5 Configuration: - Probe: EX3DV4 - SN7608; ConvF(8.11, 8.11, 8.11) @ 1880 MHz; Calibrated: 2023.3.15 - Sensor-Surface: 2mm (Mechanical Surface Detection) - Electronics: DAE4 Sn480; Calibrated: 2022.6.22 - Phantom: SAM 2; Type: QD000P40CC; Serial: TP:1464 - Measurement SW: DASY52, Version 52.10 (4); SEMCAD X Version 14.6.14 (7501) Ch9400/Area Scan (71x81x1): Interpolated grid: dx=1.500 mm, dy=1.500 mm Maximum value of SAR (interpolated) = 0.415 W/kg Ch9400/Zoom Scan (5x5x7)/Cube 0: Measurement grid: dx=8mm, dy=8mm, dz=5mm Reference Value = 7.623 V/m; Power Drift = 0.08 dB Peak SAR (extrapolated) = 0.539 W/kg SAR(1 g) = 0.304 W/kg; SAR(10 g) = 0.183 W/kg Maximum value of SAR (measured) = 0.407 W/kg 0 dB = 0.407 W/kg MORLAB Shenzhen Morlab Communications Technology Co., Ltd. FL.1-3, Building A, FeiYang Science Park, No.8 LongChang Road, Block67, BaoAn District, ShenZhen, GuangDong Province, P. R. China Tel: 86-755-36698555 Fax: 86-755-36698525 Http://www.morlab.cn E-mail: [email protected] REPORT No.：SZ23090065S01 Test Laboratory: Shenzhen Morlab Communications Technology Co., Ltd. Date: 2023.4.25 WCDMA Band II_RMC 12.2Kbps_Bottom Side_10mm_Ch9400 Communication System: UID 0, UMTS-FDD (0); Frequency: 1880 MHz;Duty Cycle: 1:1 Medium: HSL_1900 Medium parameters used: f = 1880 MHz; σ = 1.373 S/m; ε r = 39.767; ρ = 1000 kg/m 3 Ambient Temperature：23.2 °C; Liquid Temperature：22.1 °C DASY5 Configuration: - Probe: EX3DV4 - SN7608; ConvF(8.11, 8.11, 8.11) @ 1880 MHz; Calibrated: 2023.3.15 - Sensor-Surface: 2mm (Mechanical Surface Detection) - Electronics: DAE4 Sn480; Calibrated: 2022.6.22 - Phantom: SAM 2; Type: QD000P40CC; Serial: TP:1464 - Measurement SW: DASY52, Version 52.10 (4); SEMCAD X Version 14.6.14 (7501) Ch9400/Area Scan (41x71x1): Interpolated grid: dx=1.500 mm, dy=1.500 mm Maximum value of SAR (interpolated) = 1.27 W/kg Ch9400/Zoom Scan (5x5x7)/Cube 0: Measurement grid: dx=8mm, dy=8mm, dz=5mm Reference Value = 25.92 V/m; Power Drift = 0.02 dB Peak SAR (extrapolated) = 1.45 W/kg SAR(1 g) = 0.855 W/kg; SAR(10 g) = 0.485 W/kg Maximum value of SAR (measured) = 1.16 W/kg 0 dB = 1.16 W/kg MORLAB Shenzhen Morlab Communications Technology Co., Ltd. FL.1-3, Building A, FeiYang Science Park, No.8 LongChang Road, Block67, BaoAn District, ShenZhen, GuangDong Province, P. R. China Tel: 86-755-36698555 Fax: 86-755-36698525 Http://www.morlab.cn E-mail: [email protected] REPORT No.：SZ23090065S01 Test Laboratory: Shenzhen Morlab Communications Technology Co., Ltd. Date: 2023.4.25 WCDMA Band IV_RMC 12.2Kbps_Back Side_10mm_Ch1413 Communication System: UID 0, UMTS-FDD (0); Frequency: 1732.6 MHz;Duty Cycle: 1:1 Medium: HSL_1800 Medium parameters used: f = 1733 MHz; σ = 1.39 S/m; ε r = 39.364; ρ = 1000 kg/m 3 Ambient Temperature：23.2 °C; Liquid Temperature：22.1 °C DASY5 Configuration: - Probe: EX3DV4 - SN7608; ConvF(8.4, 8.4, 8.4) @ 1733 MHz; Calibrated: 2023.3.15 - Sensor-Surface: 2mm (Mechanical Surface Detection) - Electronics: DAE4 Sn480; Calibrated: 2022.6.22 - Phantom: SAM 2; Type: QD000P40CC; Serial: TP:1464 - Measurement SW: DASY52, Version 52.10 (4); SEMCAD X Version 14.6.14 (7501) Ch1413/Area Scan (71x81x1): Interpolated grid: dx=1.500 mm, dy=1.500 mm Maximum value of SAR (interpolated) = 0.491 W/kg Ch1413/Zoom Scan (5x5x7)/Cube 0: Measurement grid: dx=8mm, dy=8mm, dz=5mm Reference Value = 7.325 V/m; Power Drift = -0.05 dB Peak SAR (extrapolated) = 0.634 W/kg SAR(1 g) = 0.348 W/kg; SAR(10 g) = 0.206 W/kg Maximum value of SAR (measured) = 0.483 W/kg 0 dB = 0.483 W/kg MORLAB Shenzhen Morlab Communications Technology Co., Ltd. FL.1-3, Building A, FeiYang Science Park, No.8 LongChang Road, Block67, BaoAn District, ShenZhen, GuangDong Province, P. R. China Tel: 86-755-36698555 Fax: 86-755-36698525 Http://www.morlab.cn E-mail: [email protected] REPORT No.：SZ23090065S01 Test Laboratory: Shenzhen Morlab Communications Technology Co., Ltd. Date: 2023.4.25 WCDMA Band IV_RMC 12.2Kbps_Bottom Side_10mm_Ch1513 Communication System: UID 0, UMTS-FDD (0); Frequency: 1752.6 MHz;Duty Cycle: 1:1 Medium: HSL_1800 Medium parameters used: f = 1753 MHz; σ = 1.432 S/m; ε r = 39.05; ρ = 1000 kg/m 3 Ambient Temperature：23.2 °C; Liquid Temperature：22.1 °C DASY5 Configuration: - Probe: EX3DV4 - SN7608; ConvF(8.4, 8.4, 8.4) @ 1753 MHz; Calibrated: 2023.3.15 - Sensor-Surface: 2mm (Mechanical Surface Detection) - Electronics: DAE4 Sn480; Calibrated: 2022.6.22 - Phantom: SAM 2; Type: QD000P40CC; Serial: TP:1464 - Measurement SW: DASY52, Version 52.10 (4); SEMCAD X Version 14.6.14 (7501) Ch1513/Area Scan (41x71x1): Interpolated grid: dx=1.500 mm, dy=1.500 mm Maximum value of SAR (interpolated) = 1.49 W/kg Ch1513/Zoom Scan (5x5x7)/Cube 0: Measurement grid: dx=8mm, dy=8mm, dz=5mm Reference Value = 27.44 V/m; Power Drift = 0.03 dB Peak SAR (extrapolated) = 1.68 W/kg SAR(1 g) = 1.02 W/kg; SAR(10 g) = 0.587 W/kg Maximum value of SAR (measured) = 1.37 W/kg 0 dB = 1.37 W/kg MORLAB Shenzhen Morlab Communications Technology Co., Ltd. FL.1-3, Building A, FeiYang Science Park, No.8 LongChang Road, Block67, BaoAn District, ShenZhen, GuangDong Province, P. R. China Tel: 86-755-36698555 Fax: 86-755-36698525 Http://www.morlab.cn E-mail: [email protected] REPORT No.：SZ23090065S01 Test Laboratory: Shenzhen Morlab Communications Technology Co.…

Text truncated - open the document above for the full version.

MORLAB Shenzhen Morlab Communications Technology Co., Ltd. FL.1-3, Building A, FeiYang Science Park, No.8 LongChang Road, Block67, BaoAn District, ShenZhen , GuangDong Province, P. R. China Tel: 86-755-36698555 Fax: 86-755-36698525 Http://www.morlab.cn E-mail: [email protected] REPORT No.：SZ23090065S01 Annex E Conducted Power Note: Conducted power unit: dBm The target power was recorded in the manufacture document. 926294009538131214131513413241824233 1852.418801907.61712.41732.61752.6826.4836.4846.6 3GPP Rel 99RMC 12.2Kbps23.4623.4823.4524.0023.5123.5723.5524.0023.2523.3223.2924.00 3GPP Rel 6HSDPA Subtest-122.2922.1722.1223.0022.5422.6022.6423.5022.2522.1122.2423.00 3GPP Rel 6HSDPA Subtest-222.3022.1922.0623.0022.6422.5722.6823.5022.2922.1822.1923.00 3GPP Rel 6HSDPA Subtest-321.8221.6421.5422.5022.2121.9922.1423.0021.7221.6121.6622.50 3GPP Rel 6HSDPA Subtest-421.8221.6821.5122.5022.2421.9422.1323.0021.7321.5821.6922.50 3GPP Rel 8DC-HSDPA Subtest-122.1922.1522.1623.0022.5122.4822.6223.5022.3622.0222.3623.00 3GPP Rel 8DC-HSDPA Subtest-222.4222.2022.0623.0022.6022.5222.7523.5022.3122.2022.1323.00 3GPP Rel 8DC-HSDPA Subtest-321.7021.7221.5522.5022.3222.0722.1823.0021.8021.7321.5422.50 3GPP Rel 8DC-HSDPA Subtest-421.7621.6121.5922.5022.3021.8822.1723.0021.6821.5321.7322.50 3GPP Rel 6HSUPA Subtest-121.1821.0821.0122.0021.5722.6422.7723.5022.2622.1722.1423.00 3GPP Rel 6HSUPA Subtest-221.1821.0721.0322.0021.5622.1422.2123.0021.7521.7021.6822.50 3GPP Rel 6HSUPA Subtest-320.8920.7620.6921.5021.5622.6022.6523.5022.2222.1322.1023.00 3GPP Rel 6HSUPA Subtest-422.1822.0822.0423.0022.5422.6322.6823.5022.2422.1422.3223.00 3GPP Rel 6HSUPA Subtest-521.0820.9520.8922.0021.4521.4322.7023.0022.2322.1522.3123.00 3GPP Rel 7 HSPA+ (16QAM) Subtest-120.8220.7020.6421.5021.1821.1321.1922.0020.7120.7220.7621.50 Cable Loss0.8Cable Loss0.8Cable Loss0.6 Max.23.48Max.23.57Max.23.32 Mode Attenuator Tune-up Limit (dBm) Tune-up Limit (dBm) Tune-up Limit (dBm) BandWCDMA Band II (dBm)WCDMA Band IV (dBm)WCDMA Band V (dBm) TX Channel Frequency (MHz) Full Power MORLAB Shenzhen Morlab Communications Technology Co., Ltd. FL.1-3, Building A, FeiYang Science Park, No.8 LongChang Road, Block67, BaoAn District, ShenZhen, GuangDong Province, P. R. China Tel: 86-755-36698555 Fax: 86-755-36698525 Http://www.morlab.cn E-mail: [email protected] REPORT No.：SZ23090065S01 BW [MHz]ModulationRB SizeRB Offset Low Channel Middle Channel High Channel BW [MHz] ModulationRB SizeRB Offset Low Channel Middle Channel High Channel 187001890019100200502017520300 18601880190017201732.51745 20QPSK1022.5722.6622.6020QPSK1022.7022.7422.63 20QPSK14922.6122.6022.5320QPSK14922.6922.7122.57 20QPSK19922.4622.5722.5520QPSK19922.6622.5222.58 20QPSK50021.6321.8021.7920QPSK50021.7821.8221.61 20QPSK502421.5521.6521.6020QPSK502421.7821.6821.73 20QPSK505021.6521.6721.5520QPSK505021.6221.5721.75 20QPSK100021.5321.5921.5920QPSK100021.6721.6421.61 2016QAM1021.6921.7921.692016QAM1021.8221.8121.80 2016QAM14921.7921.6421.712016QAM14921.8221.5421.61 2016QAM19921.7621.6021.702016QAM19921.7621.7321.62 2016QAM50020.7520.7420.682016QAM50020.8120.7720.68 2016QAM502420.6020.7020.642016QAM502420.7120.6520.65 2016QAM505020.8020.5020.562016QAM505020.8320.6320.51 2016QAM100020.5720.7720.842016QAM100020.7820.7220.69 2064QAM1020.5920.5820.532064QAM1020.5620.7620.51 2064QAM14920.6220.6620.522064QAM14920.5320.6720.86 2064QAM19920.8220.7720.612064QAM19920.8220.6520.62 2064QAM50019.5819.7719.592064QAM50019.7219.6019.67 2064QAM502419.6519.7119.642064QAM502419.7519.7319.78 2064QAM505019.6219.6219.512064QAM505019.5419.6419.49 2064QAM100019.5619.5919.792064QAM1000 19.6819.5819.66 18675 189001912520025 201…

Text truncated - open the document above for the full version.