2AVFE-E1PLUS4G Smart Phone

Quick Start Guide Инструкция по началу работы Guía de inicio rápido HTC Wildfire E1 Plus Contents English........................................................................1 Pусский.......................................................................12 Español.......................................................................21 Thank you for choosing HTC Wildfire E1 Plus smartphone. Carefully read the User's Guide before using the device and save it for further solutions to issues arising during operation. Contents of delivery: ○ 1 HTC Wildfire E1 Plus smart phone ○ 2 Warranty Card ○ 3 Quick start Guide ○ 4 Charger ○ 5 USB cable ○ 6 Heardphone * Actual configuration on accessories will be different as per different selling region/territory. Know Your Device Before using the device, familiarize yourself with its basic operations.  To power on your device, press and hold the power button for 3 seconds till the screen turns on.  When you turn on your smartphone for the first time, follow the on-screen prompts for initial setup.  Press and hold the power button for 10 or more seconds to forcibly restart your device. ○ 1 Headset Jack ○ 2 Micro-USB port ○ 3 Power button ○ 4 Volume button Getting Started Follow the instructions in the following figures to set up your device. Please use the eject pin included. Accumulator charging  Connect the USB connector of the cable to the charger and the microUSB to the corresponding connector of the smartphone;  In order to maintain long-term battery life and prolong its service life, ensure a reliable connection of the charger to the network and to the phone. Frequent loss of contact when charging significantly reduces the battery life. For More Information You can find service hotlines, retailer addresses, service policies and more information for your HTC Wildfire E1 Plus at www.HTC/com/ru/. Go to Settings and touch System> About Phone> Legal to view legal information for your product. Go to Settings and touch System>About Phone to view FCC ID for your product.  All pictures and illustrations in this guide,including but not limited to the device color, size, and display content, are for your reference only. The actual device may vary. Nothing in this guide constitutes a warranty of any kind, expree or implied. Safety regulations  Before using the device, read the safety information.  Follow the precautions below to prevent dangerous situations.  Do not insert or remove the SIM card when your device is powered on.  Do not use cut or modified SIM or microSD cards with your devices as these may not be recognized and could damage the card tray(slot).  Do not use the device in places or premises where the use of mobile phones and radio equipment is not recommended or prohibited by the rules;  Do not use the device near a precise electronic or medical equipment, because interference may be caused to their work;  Do not use or store the device in dusty places. Dust may cause the device to malfunction;  Do not use the device in case of mechanical damage to the case or accessories;  Keep the device away from children and pets. Small parts of the device can cause suffocation if swallowed;  Be careful not to scratch your device or hurt yourself when using the eject pin.  Do not use the device outdoors during a thunderstorm;  Do not store the device in high temperatures (near a heater, microwave oven, oven, etc.). An overheated rechargeable battery may cause a fire and explosion;  Follow all safety precautions and local rules for using mobile devices while driving;  To avoid damage to your hearing, do not use the headset at maximum volume when listening to music for a long time;  Use only chargers, rechargeable batteries and other accessories approved by the manufacturer;  Do not allow the contact of the battery with conductive objects (metal objects, liquids, etc.);  Do not use the device in places with high humidity (swimming pool, bathroom, etc.), and avoid using the device with wet hands.  Do not try to open the battery cover by yourself, it will cause battery explosion. Please go to authorized service center for any technical support.  If your SIM card does not match your device, please contact your carrier. Transportation and storage conditions  Packaged smartphone can be transported in any type of closed vehicles at temperatures from + 5 ° C to +40 ° C, protected from direct exposure to precipitation, solar radiation and mechanical damage. Disposal rules  Keep in mind that after the life of the product or electronic accessories (memory, cable and so on.) they cannot be disposed of with other household waste. It is necessary to use special landfills or points for disposal of electronic devices.  Detailed instructions on the use of the device, its functions and pre-installed software are available in the memory of the smartphone (Settings - About the device - User's Guide), as well as electronically when the smartphone is connected to a personal computer. Real Service is the warranty service provider (also called Authorized Service Provider) in the Russian Federation and Commonwealth of Independent States for HTC Wildfire E1 model. more information please visit at www.realsc.ru. Legal Notice Trademarks and Permissions HTC and HTC Wildfire are the trademarks of HTC Corporation and used under license by Fortune Ship International Industrial Limited for smartphones in Russian Federation and Commonwealth of Independent States. Android is a trademark of Google LLC. LTE is a trademark of ETSI. The Bluetooth ○ Rword mark and logos are registered trademarks owned by Bluetooth SIG, Inc. Wi-Fi ○ R, the Wi-Fi CERTIFIED logo, and the Wi-Fi logo are trademarks of Wi-Fi Alliance. Copyright ○ C 2019 Fortune Ship International Industrial Limited.All rights reserved. THIS DOCUMENT IS FOR INFORMATION PURPOSE ONLY, AND DOES NOT CONSTITUTE ANY KIND OF WARRANTIES. FCC RF Exposure Information and Statement This device meets the government's re…

Text truncated - open the document above for the full version.

Report No.: W EXHIBI EUT View 1 EUT View 2 WTX19X110 T 2 - EUT 1 2 81161W-7 T PHOTO OGRAPH HS Model FC : Wildfire E1 CC Part 15B Report No.: W EUT View 3 EUT View 4 WTX19X110 3 4 81161W-7 Model FC : Wildfire E1 CC Part 15B Report No.: W EUT View 5 EUT View 6 WTX19X110 5 6 81161W-7 Model FC : Wildfire E1 CC Part 15B Report No.: W EUT View 7 WTX19X110 7 81161W-7 Model FC : Wildfire E1 CC Part 15B

Report No.: W EXHIBI Proposed Specificatio n ID for the pr a SIM/USIM displayed el information factory-set- u packaging, a required reg authorization Proposed WTX19X110 T 1 - PRO FCC Labe ns: Text is B roduct. Produ M card) to ac lectronically and dedic a unalterable fo at the time of gulatory infor n requiremen Label Loca 81161W-7 ODUCT L l Format Black in colo ucts must not ccess the inf in a manner ated exclusiv ormat. A phy f importation rmation, such nts. ation on EU LABELIN or and is justif t require spec formation. Th r that is clea ve applicatio ysical tempo n, marketing, h that the pro UT FCC NG fied. Go to S cial accessorie he FCC ID, w arly legible w on(s) or scr orary label is and sales. Th oduct can be i C Label Loca ettings and to es or supplem warning state without the a ipt(s) must s also require he physical l identified as ation ouch System a mental plug-in ements, or ot aid of magni be secured ed on the pr abel can be a complying w Model FC about Phone ns (e.g., the in ther informa ification. Bot and implem roduct, or a a summary v with the FCC : Wildfire E1 CC Part 15B to view FCC nstallation of tion must be th regulatory mented in a label on the version of the ’s equipment C f e y a e e t

Report No.: W EXHIBI EUT Housi n EUT Housi n WTX19X110 T 3 - EUT ng and Boar ng and Boar 81161W-7 T INTER rd View 1 rd View 2 NAL PHO OTOGRA APHS Model FC : Wildfire E1 CC Part 15B Report No.: W Solder Boar Solder Boar WTX19X110 rd-Compone rd-Compone 81161W-7 ent View 1 ent View 2 Model FC : Wildfire E1 CC Part 15B Report No.: W Solder Boar Solder Boar WTX19X110 rd-Compone rd-Compone 81161W-7 ent View 3 ent View 4 Model FC : Wildfire E1 CC Part 15B Report No.: W Solder Boar Solder Boar WTX19X110 rd-Compone rd-Compone 81161W-7 ent View 5 ent View 6 Model FC : Wildfire E1 CC Part 15B Report No.: W Solder Boar Antenna Vi WTX19X110 rd-Compone iew 81161W-7 ent View 7 Wi-Fi/BT/GP PS Ant GSM 8 WCDM LTE B2/4 850/1900; MA B2/4/5; 4/5/7/17 Ant. GSM1900 LTE Model FC 0; WCDMA B B4/5/7 Ant. : Wildfire E1 CC Part 15B B2/4;

Model: Wildfire E1 Report No.: WTX19X11081161W Page 1 of226 SAR Report FCC SAR Measurement and Test Report For Fortune Ship International Industrial Limited Unit C, 24/F, Golden Bear Industrial Centre, 66-82 Chai Wan Kok Street, Tsuen Wan NT, HONGKONG, China FCC ID: 2AVFE-E1PLUS Test Standards: FCC Part 2.1093 ANSI / IEEE C95.1 :2005+A1:2010 ANSI / IEEE C95.3 : 2002(R2008) IEEE 1528 :2013 Product Description: 4G Smart Phone Tested Model: Wildfire E1 Report No.: WTX19X11081161W Sample Received Date: 2019-11-22 Tested Date: 2019-11-22 to 2019-12-26 Issued Date: 2019-12-27 Tested By: Ruler Liu / Engineer Reviewed By: Silin Chen / EMC Manager Approved & Authorized By: Jandy So / PSQ Manager Prepared By: Shenzhen SEM Test Technology Co., Ltd. 1/F, Building A, Hongwei Industrial Park, Liuxian 2nd Road, Bao'an District, Shenzhen, P.R.C.（518101） Tel.: +86-755-33663308 Fax.: +86-755-33663309 Website: www.semtest.com.cn Note: This test report is limited to the above client company and the product model only. It may not be duplicated without prior permitted by Shenzhen SEM Test Technology Co., Ltd. Model: Wildfire E1 Report No.: WTX19X11081161W Page 2 of226 SAR Report TABLE OF CONTENTS 1. General Information ................................................................................................................................................... 3 1.1 Product Description for Equipment Under Test (EUT) ......................................................................................... 3 1.2 Test Standards .................................................................................................................................................... 7 1.3 Test Methodology ................................................................................................................................................ 7 1.4 Test Facility ......................................................................................................................................................... 7 2. Summary of Test Results .......................................................................................................................................... 8 3. Specific Absorption Rate (SAR) ................................................................................................................................ 9 3.1 Introduction .......................................................................................................................................................... 9 3.2 SAR Definition ..................................................................................................................................................... 9 4. SAR Measurement System ...................................................................................................................................... 10 4.1 The Measurement System ................................................................................................................................ 10 4.2 Probe ................................................................................................................................................................. 10 4.3 Probe Calibration Process ................................................................................................................................. 12 4.4 Phantom ............................................................................................................................................................ 13 4.5 Device Holder .................................................................................................................................................... 13 4.6 Test Equipment List ........................................................................................................................................... 14 5. Tissue Simulating Liquids ....................................................................................................................................... 15 5.1 Composition of Tissue Simulating Liquid ........................................................................................................... 15 5.2 Tissue Dielectric Parameters for Head and Body Phantoms ............................................................................. 16 5.3 Tissue Calibration Result ................................................................................................................................... 17 6. SAR Measurement Evaluation ................................................................................................................................ 18 6.1 Purpose of System Performance Check ............................................................................................................ 18 6.2 System Setup .................................................................................................................................................... 18 6.3 Validation Results .............................................................................................................................................. 19 7. EUT Testing Position ............................................................................................................................................... 21 7.1 Define Two Imaginary Lines on The Handset .................................................................................................... 21 7.2 Cheek Position .................................................................................................................................................. 22 7.3 Tilted Position .................................................................................................................................................... 22 7.4 Body Position .................................................................................................................................................... 23 7.5 EUT Anten…

Text truncated - open the document above for the full version.

Model: Wildfire E1 Report No.: WTX19X11081161W-6 Page 1 of 36 FCC Part 15.247 FCC Part 15C Measurement and Test Report For Fortune Ship International Industrial Limited Unit C, 24/F, Golden Bear Industrial Centre, 66-82 Chai Wan Kok Street, Tsuen Wan NT, HONGKONG, China FCC ID: 2AVFE-E1PLUS FCC Rule(s): FCC Part 15.247 Product Description: 4G Smart Phone Tested Model: Wildfire E1 Report No.: WTX19X11081161W-6 Sample Receipt Date: 2019-11-22 Tested Date: 2019-11-22 to 2019-12-25 Issued Date: 2019-12-26 Tested By: Jason Su / Engineer Reviewed By: Silin Chen / EMC Manager Approved & Authorized By: Jandy So / PSQ Manager Prepared By: Shenzhen SEM Test Technology Co., Ltd. 1/F, Building A, Hongwei Industrial Park, Liuxian 2nd Road, Bao'an District, Shenzhen, P.R.C.（518101） Tel.: +86-755-33663308 Fax.: +86-755-33663309 Website: www.semtest.com.cn Note: This test report is limited to the above client company and the product model only. It may not be duplicated without prior permitted by Shenzhen SEM Test Technology Co., Ltd. Model: Wildfire E1 Report No.: WTX19X11081161W-6 Page 2 of 36 FCC Part 15.247 TABLE OF CONTENTS 1. GENERAL INFORMATION ................................................................................................................................... 4 1.1 PRODUCT DESCRIPTION FOR EQUIPMENT UNDER TEST (EUT) ............................................................................... 4 1.2 TEST STANDARDS ................................................................................................................................................... 5 1.3 TEST METHODOLOGY ............................................................................................................................................. 5 1.4 TEST FACILITY ....................................................................................................................................................... 5 1.5 EUT SETUP AND TEST MODE ................................................................................................................................. 6 1.6 MEASUREMENT UNCERTAINTY .............................................................................................................................. 6 1.7 TEST EQUIPMENT LIST AND DETAILS ..................................................................................................................... 7 2. SUMMARY OF TEST RESULTS ........................................................................................................................... 9 3. RF EXPOSURE ....................................................................................................................................................... 10 3.1 STANDARD APPLICABLE ....................................................................................................................................... 10 3.2 TEST RESULT........................................................................................................................................................ 10 4. ANTENNA REQUIREMENT ................................................................................................................................ 11 4.1 STANDARD APPLICABLE ....................................................................................................................................... 11 4.2 EVALUATION INFORMATION ................................................................................................................................ 11 5. POWER SPECTRAL DENSITY ........................................................................................................................... 12 5.1 STANDARD APPLICABLE ....................................................................................................................................... 12 5.2 TEST PROCEDURE ................................................................................................................................................. 12 5.3 SUMMARY OF TEST RESULTS/PLOTS .................................................................................................................... 12 6. DTS BANDWIDTH ................................................................................................................................................. 14 6.1 STANDARD APPLICABLE ....................................................................................................................................... 14 6.2 TEST PROCEDURE ................................................................................................................................................. 14 6.3 SUMMARY OF TEST RESULTS/PLOTS .................................................................................................................... 14 7. RF OUTPUT POWER ............................................................................................................................................ 16 7.1 STANDARD APPLICABLE ....................................................................................................................................... 16 7.2 TEST PROCEDURE ................................................................................................................................................. 16 7.3 SUMMARY OF TEST RESULTS/PLOTS .................................................................................................................... 16 8. FIELD STRENGTH OF SPURIOUS EMISSIONS ............................................................................................. 18 8.1 STANDARD APPLICABLE ....................................................................................................................................... 18 8.2 TEST PROCEDURE ................................................................................................................................................. 18 8.3 CORRECTED AMPLITUDE & MARGIN CALCULATION .............…

Text truncated - open the document above for the full version.

Model: Wildfire E1 Report No.: WTX19X11081161W Page 101 of226 SAR Report Maximum location: X=0.00, Y=0.00 SAR 10g (W/Kg) 5.171252 SAR 1g (W/Kg) 9.611250 Z Axis Scan Z (mm) 0.00 4.00 9.00 14.00 19.00 24.00 29.00 SAR (W/Kg) 0.0000 10.3455 7.1125 5.1026 3.425 3.0242 2.1125 3D screen shot Hot spot position Model: Wildfire E1 Report No.: WTX19X11081161W Page 102 of226 SAR Report MEASUREMENT 4 For Head Liquid Type: Validation measurement (Fast, 75.00 %) Date of measurement: 12/17/2019 Measurement duration: 12 minutes 21 seconds E-field Probe: SSE5 - SN 09/13 EP168; ConvF: 6.35; Calibrated: 05/22/2019 A. Experimental conditions Area Scan dx=8mm dy=8mm Phantom Validation plane Device Position Dipole Band CW1900 Signal Duty Cycle 1:1 B. SAR Measurement Results Frequency (MHz) 1900.000000 Relative Permittivity (real part) 38.560124 Conductivity (S/m) 1.380369 Power Variation (%) 1.022540 Ambient Temperature 21.1 Liquid Temperature 21.3 SURFACE SAR VOLUME SAR Model: Wildfire E1 Report No.: WTX19X11081161W Page 103 of226 SAR Report Maximum location: X=0.00, Y=0.00 SAR 10g (W/Kg) 5.174526 SAR 1g (W/Kg) 9.913214 Z Axis Scan Z (mm) 0.00 4.00 9.00 14.00 19.00 24.00 29.00 SAR (W/Kg) 0.0000 10.2354 6.8400 5.0121 4.1189 3.0522 2.8424 3D screen shot Hot spot position Model: Wildfire E1 Report No.: WTX19X11081161W Page 104 of226 SAR Report MEASUREMENT 5 For Head Liquid Type: Validation measurement (Fast, 75.00 %) Date of measurement: 12/18/2019 Measurement duration: 12 minutes 21 seconds E-field Probe: SSE5 - SN 09/13 EP168; ConvF: 5.64; Calibrated: 05/22/2019 A. Experimental conditions Area Scan dx=8mm dy=8mm Phantom Validation plane Device Position Dipole Band CW2450 Signal Duty Cycle 1:1 B. SAR Measurement Results Frequency (MHz) 2450.000000 Relative Permittivity (real part) 38.153660 Conductivity (S/m) 1.740236 Power Variation (%) 1.141452 Ambient Temperature 21.1 Liquid Temperature 21.2 SURFACE SAR VOLUME SAR Model: Wildfire E1 Report No.: WTX19X11081161W Page 105 of226 SAR Report Maximum location: X=0.00, Y=0.00 SAR 10g (W/Kg) 8.020427 SAR 1g (W/Kg) 13.452457 Z Axis Scan Z (mm) 0.00 4.00 9.00 14.00 19.00 24.00 29.00 SAR (W/Kg) 0.0000 14.1034 12.0012 10.2624 7.4715 5.9022 4.5114 3D screen shot Hot spot position Model: Wildfire E1 Report No.: WTX19X11081161W Page 106 of226 SAR Report MEASUREMENT 6 For Head Liquid Type: Validation measurement (Fast, 75.00 %) Date of measurement: 12/18/2019 Measurement duration: 12 minutes 21 seconds E-field Probe: SSE5 - SN 09/13 EP168; ConvF: 5.37; Calibrated: 05/22/2019 A. Experimental conditions Area Scan dx=8mm dy=8mm Phantom Validation plane Device Position Dipole Band CW2600 Signal Duty Cycle 1:1 B. SAR Measurement Results Frequency (MHz) 2600.000000 Relative Permittivity (real part) 38.631092 Conductivity (S/m) 1.930182 Power Variation (%) 1.028221 Ambient Temperature 21.1 Liquid Temperature 21.2 SURFACE SAR VOLUME SAR Model: Wildfire E1 Report No.: WTX19X11081161W Page 107 of226 SAR Report Maximum location: X=0.00, Y=0.00 SAR 10g (W/Kg) 8.270822 SAR 1g (W/Kg) 13.670282 Z Axis Scan Z (mm) 0.00 4.00 9.00 14.00 19.00 24.00 29.00 SAR (W/Kg) 0.0000 14.0426 12.1354 10.2965 7.4854 5.9354 4.5186 3D screen shot Hot spot position Model: Wildfire E1 Report No.: WTX19X11081161W Page 108 of226 SAR Report MEASUREMENT 7 For Head Liquid Type: Validation measurement (Fast, 75.00 %) Date of measurement: 12/19/2019 Measurement duration: 12 minutes 21 seconds E-field Probe: SSE2 - SN 45/15 EPGO280; ConvF: 2.44; Calibrated: 07/08/2019 A. Experimental conditions Area Scan dx=8mm dy=8mm Phantom Validation plane Device Position Dipole Band CW5200 Signal CW (Crest factor: 1.0) B. SAR Measurement Results Frequency (MHz) 5200.000000 Relative Permittivity (real part) 35.612911 Conductivity (S/m) 4.871483 Power Variation (%) 0.943213 Ambient Temperature 21.1 Liquid Temperature 21.2 SURFACE SAR VOLUME SAR Model: Wildfire E1 Report No.: WTX19X11081161W Page 109 of226 SAR Report Maximum location: X=1.00, Y=0.00 SAR 10g (W/Kg) 5.310334 SAR 1g (W/Kg) 16.946226 Z (mm) 0.00 2.00 7.00 12.00 17.00 22.00 27.00 SAR (W/Kg) 41.7264 27.2408 6.5746 1.6234 0.3765 0.0793 0.0129 3D screen shot Hot spot position Model: Wildfire E1 Report No.: WTX19X11081161W Page 110 of226 SAR Report MEASUREMENT 8 For Head Liquid Type: Validation measurement (Fast, 75.00 %) Date of measurement: 12/19/2019 Measurement duration: 12 minutes 21 seconds E-field Probe: SSE2 - SN 45/15 EPGO280; ConvF: 2.52; Calibrated: 07/08/2019 A. Experimental conditions Area Scan dx=8mm dy=8mm Phantom Validation plane Device Position Dipole Band CW5800 Signal CW (Crest factor: 1.0) B. SAR Measurement Results Frequency (MHz) 5800.000000 Relative Permittivity (real part) 35.612911 Conductivity (S/m) 5.171483 Power Variation (%) 0.943782 Ambient Temperature 21.1 Liquid Temperature 21.2 SURFACE SAR VOLUME SAR Model: Wildfire E1 Report No.: WTX19X11081161W Page 111 of226 SAR Report Maximum location: X=1.00, Y=1.00 SAR 10g (W/Kg) 5.879544 SAR 1g (W/Kg) 17.190731 Z (mm) 0.00 2.00 7.00 12.00 17.00 22.00 27.00 SAR (W/Kg) 48.4695 30.5699 5.7100 1.0698 0.1906 0.0364 0.0052 3D screen shot Hot spot position Model: Wildfire E1 Report No.: WTX19X11081161W Page 112 of226 SAR Report MEASUREMENT 9 For Body Liquid Type: Validation measurement (Fast, 75.00 %) Date of measurement: 12/16/2019 Measurement duration: 12 minutes 21 seconds E-field Probe: SSE5 - SN 09/13 EP168; ConvF: 7.28; Calibrated: 05/22/2019 A. Experimental conditions Area Scan dx=8mm dy=8mm Phantom Validation plane Device Position Dipole Band CW750 Signal Duty Cycle 1:1 B. SAR Measurement Results Frequency (MHz) 750.000000 Relative Permittivity (real part) 54.964739 Conductivity (S/m) 0.931048 Power Variation (%) 0.034745 Ambient Temperature 21.1 Liquid Temperature 21.3 SURFACE SAR VOLUME SAR Model: Wildfire E1 Report No.: WTX19X11081161W Page 113 of226 SAR Report Maximum location: X=0.00, Y=0.00 SAR 10g (W/Kg) 1.000865 SAR 1g (W/Kg) 2.124211 Z Axis Scan Z (mm) 0.00 4.00 9.00 14.00 19.00 24.00 29.00 SA…

Text truncated - open the document above for the full version.

Model: Wildfire E1 Report No.: WTX19X11081161W-4 Page 1 of 62 FCC Part 15.247 FCC Part 15C Measurement and Test Report For Fortune Ship International Industrial Limited Unit C, 24/F, Golden Bear Industrial Centre, 66-82 Chai Wan Kok Street, Tsuen Wan NT, HONGKONG, China FCC ID: 2AVFE-E1PLUS FCC Rule(s): FCC Part 15.247 Product Description: 4G Smart Phone Tested Model: Wildfire E1 Report No.: WTX19X11081161W-4 Sample Receipt Date: 2019-11-22 Tested Date: 2019-11-22 to 2019-12-25 Issued Date: 2019-12-26 Tested By: Jason Su / Engineer Reviewed By: Silin Chen / EMC Manager Approved & Authorized By: Jandy So / PSQ Manager Prepared By: Shenzhen SEM Test Technology Co., Ltd. 1/F, Building A, Hongwei Industrial Park, Liuxian 2nd Road, Bao'an District, Shenzhen, P.R.C.（518101） Tel.: +86-755-33663308 Fax.: +86-755-33663309 Website: www.semtest.com.cn Note: This test report is limited to the above client company and the product model only. It may not be duplicated without prior permitted by Shenzhen SEM Test Technology Co., Ltd. Model: Wildfire E1 Report No.: WTX19X11081161W-4 Page 2 of 62 FCC Part 15.247 TABLE OF CONTENTS 1. GENERAL INFORMATION ................................................................................................................................... 4 1.1 PRODUCT DESCRIPTION FOR EQUIPMENT UNDER TEST (EUT) ............................................................................... 4 1.2 TEST STANDARDS ................................................................................................................................................... 5 1.3 TEST METHODOLOGY ............................................................................................................................................. 5 1.4 TEST FACILITY ....................................................................................................................................................... 5 1.5 EUT SETUP AND TEST MODE ................................................................................................................................. 6 1.6 MEASUREMENT UNCERTAINTY .............................................................................................................................. 7 1.7 TEST EQUIPMENT LIST AND DETAILS ..................................................................................................................... 8 2. SUMMARY OF TEST RESULTS ......................................................................................................................... 10 3. RF EXPOSURE ....................................................................................................................................................... 11 3.1 STANDARD APPLICABLE ....................................................................................................................................... 11 3.2 TEST RESULT........................................................................................................................................................ 11 4. ANTENNA REQUIREMENT ................................................................................................................................ 12 4.1 STANDARD APPLICABLE ....................................................................................................................................... 12 4.2 EVALUATION INFORMATION ................................................................................................................................ 12 5. POWER SPECTRAL DE…

Text truncated - open the document above for the full version.