2AVIAEF-DT500Samsung A7

1 2 1 2 Slide the power button to the right to turn on the keyboard. (The blue indicator lights on for 3 seconds then turns off ) Press “Fn” and “ ” buttons together to enter the pairing mode. During pairing mode, the blue indicator flashes continuously. Turn on your tablet device, go to [ Setting ] > [ Connections ] > [ Bluetooth ] ; and click on the "Galaxy Book Cover Keyboard" to connect with the keyboard. Bluetooth pairing instructions To connect with another device, disconnect the keyboard from the previous device, then press “Fn” and “ ” buttons for new connection. How to connect other device Enter 6 digitals appeared on the tablet device, and press [Enter] key on the keyboard for pairing. 1. 2. 3. 4. Visit the safety information. www.samsung.com to view the user manual and Product Specitification Product name: Book Cover keyboard Model No. : EF-DT500 Working temperature0°C - 35°C • • • • • EF-DT500 is optimized to connect with the SAMSUNG Galaxy Tab A7. • • Pour vous connecter à un autre appareil, déconnectez le clavier de l’appareil précédent, puis appuyez sur les touches “Fn” et “ ” pour établir une nouvelle connexion. Comment connecter un autre appareil Faites glisser la touche d’alimentation vers la droite pour allumer le clavier. (Le voyant bleu s’allume pendant 3 secondes, puis s’éteint) Appuyez simultanément sur les touches “Fn” et “ ”pour accéder au mode de couplage. Pendant le mode de couplage, le voyant bleu clignote en continu. Allumez la tablette, sélectionnez [Paramètres]> [Connexions]> [Bluetooth], puis cliquez sur “ Galaxy Book Cover Keyboard ” pour vous connecter au clavier. Instructions de couplage Bluetooth Saisissez les 6 chiffres apparaissant sur la tablette et appuyez sur la touche [Enter] du clavier pour procéder au couplage. 1. 2. 3. 4. 3 Le modèle EF-DT500 est optimisé pour une connexion avec la SAMSUNG Galaxy Tab A7. Visitez le site d’emploi et les consignes de sécurité. www.samsung.com pour consulter le mode Spécifications du produit Nom du produit : Book Cover Keyboard Modèle: EF-DT500 Température de fonctionnement : 0°C à 35°C • • • EF-DT500 ist für die Verbindung mit dem SAMSUNG Galaxy Tab A7 optimiert. Schieben Sie den Netzschalter nach rechts, um die Tastatur einzuschalten. (Die blaue Anzeige leuchtet 3 Sekunden lang auf und erlischt dann.) Drücken Sie die Tasten “Fn” und “ ” zusammen, um in den Kopplungsmodus zu gelangen.Im Kopplungsmodus blinkt das blaue Licht weiterhin. Schalten Sie Ihr Tablet-Gerät ein, gehen Sie zu [ Setting ] > [ Connections ]> [ Bluetooth ]. Klicken Sie dann auf “Galaxy Book Cover Keyboard”, um eine Verbindung mit der Tastatur herzustellen. Anweisungen zur Bluetooth-Kopplung Um eine Verbindung mit einem anderen Gerät herzustellen, trennen Sie die Tastatur vom vorherigen Gerät und drücken Sie dann die Tasten “Fn” und “ ” für eine neue Verbindung. Andere Geräte anschließen Geben Sie die 6 Ziffern ein, die auf dem Tablet-Gerät angezeigt wurden, und drücken Sie die [Enter]-Taste auf der Tastatur zum Koppeln. 1. 2. 3. 4. Besuchen Sie Benutzerhandbuch und die Sicherheitsinformationen anzuzeigen. www.samsung.com , um das Produktspezifikationen Produktname: Book Wrapped Keyboard Modell: EF-DT500 Arbeitstemperatur: 0 °C -35 °C • • • 4 • • 5 EF-DT500 è ottimizzato per connettersi con SAMSUNG Galaxy Tab A7. Fate scorrere il tasto di accensione e spegnimento verso destra per accendere la tastiera. (L'indicatore blu si accende per 3 secondi, quindi si spegne) Premete contemporaneamente i pulsanti “Fn” e “ ” per accedere alla modalità di accoppiamento. Durante la modalità di accoppiamento, la spia blu lampeggia continuamente. Accendete il tablet, andate su [Impostaz.]> [Connessioni]> [Bluetooth] e fate clic su "Galaxy Book Cover Keyboard" per connettervi con la tastiera. Istruzioni di accoppiamento Bluetooth Per connettervi con un altro dispositivo, scollegate la tastiera dal dispositivo precedente, quindi premete i pulsanti “Fn” e “ ” per una nuova connessione. Come connettere un altro dispositivo Inserite le 6 cifre visualizzate sul tablet e premete il pulsante [Enter] sulla tastiera per effettuare l'accoppiamento. 1. 2. 3. 4. Visitare dell'utente e le informazioni sulla sicurezza. www.samsung.com per visualizzare il manuale Specifiche del prodotto Nome prodotto: Book Cover Keyboard Modello: EF-DT500 Temperatura di esercizio: 0 °C - 35 °C • • • • • 6 El modelo EF-DT500 está optimizado para conectarlo a la SAMSUNG Galaxy Tab A7. Deslice el botón de encendido hacia la derecha para encender el teclado.(el indicador azul se enciende durante 3 segundos y luego se apaga) Pulse los botones “Fn” y “ ” al mismo tiempo para activar el modo de emparejamiento. Durante el modo de emparejamiento, el indicador azul parpadea continuamente. Encienda la tablet, vaya a [Ajustes]> [Conexiones]> [Bluetooth] y haga clic en “Galaxy Book Cover Keyboard” para conectarse al teclado. Instrucciones de emparejamiento por Bluetooth Para conectarse a otro dispositivo, desconecte el teclado del dispositivo anterior y, a continuación, pulse los botones “Fn” y “ ” para establecer una conexión nueva. Cómo conectar otro dispositivo Introduzca los 6 dígitos que aparecen en la tablet y pulse la tecla [Entrar] en el teclado para realizar el emparejamiento. 1. 2. 3. 4. Visite usuario y la información de seguridad. www.samsung.com para ver el manual del Especificaciones del producto Nombre del producto: Book Cover Keyboard Modelo: EF-DT500 Temperatura de funcionamiento: de 0 °C a 35 °C • • • • • EF-DT500 é otimizado para se ligar com o SAMSUNG Galaxy Tab A7. Deslize o botão de ligar/desligar para a direita para ligar o teclado(O indicador azul acende por 3 segundos e depois apaga) Pressione os botões “Fn” e “ ” simultaneamente para entrar no modo de emparelhamento.Durante o modo de emparelhamento, o indicador azul pisca continuamente. igue o seu tablet, vá a [Configuração]> [Conexões]> [Bluetooth]; e clique em "Teclado com capa Galaxy" para se ligar ao teclado. Instruções de emp…

Text truncated - open the document above for the full version.

Agent Authorization Company: Samsung Trading (Shanghai) Co., Ltd Address: 200122 10F.No.898Puming Road, Shanghai HNA Tower Pudong New Area PRC Product Name: Samsung A7 Model Number(s): EF-DT500 Product Description: Samsung A7 We authorize MiCOM Labs Inc., 575 Boulder Court, Pleasanton, California 94566, USA, to act on our behalf on all matters concerning the certification of above named equipment. We declare that MiCOM Labs Inc. is allowed to forward all information related to the approval and certification of equipment to the regulatory agencies as required and to discuss any issues concerning the approval application. Any and all acts carried out by MiCOM Labs on our behalf shall have the same effect as acts of our own. Signature: Date: 2020-11-05 Name: Ying Kang Title: Manager Company: Samsung Trading (Shanghai) Co., Ltd

Annex No.: BL-SZ2090437-AW 1 / 4 EUT EXTERNAL PHOTOS FRONT VIEW OF EUT REAR VIEW OF EUT Annex No.: BL-SZ2090437-AW 2 / 4 LEFT SIDE VIEW OF EUT RIGHT SIDE OF EUT Annex No.: BL-SZ2090437-AW 3 / 4 TOP VIEW OF EUT BOTTOM VIEW OF EUT Annex No.: BL-SZ2090437-AW 4 / 4 OPEN

※ 본 사양은 디자인 부서의 허가없이 수정 및 배포를 금합니다. 제 품 명 품 명 모 델 명 개발담당 작성일자작성부서DESIGNER 담 당 수 신 부 서 발 신 부 서 승 인담 당승 인 COLOR Galaxy Tab A7 Design Group 디자인 사양서 (삼성물산 디자인팀) Gray Tab A7 Book Cover Keyboard_Quickguide label Book Cover Keyboard 2020.10.12.V2 Juzz.liu Model No: EF-DT500FCC ID : 2AVIAEF-DT500 ManufacturerFINE TRIUMPH TECHNOLOGY CORP.,LTD

Annex No.: BL-SZ2090437-AI 1 / 4 EUT INTERNAL PHOTOS EUT UNCOVER VIEW EUT UNCOVER VIEW Annex No.: BL-SZ2090437-AI 2 / 4 EUT UNCOVER VIEW EUT UNCOVER VIEW Annex No.: BL-SZ2090437-AI 3 / 4 MAIN BOARD TOP VIEW MAIN BOARD REAR VIEW b RF Chip PCB Antenna Annex No.: BL-SZ2090437-AI 4 / 4 Battery Photo (FRONT) Battery Photo (REAR)

RF Exposure Evaluation for FCC ID: 2AVIAEF‐DT500 Refer user manual this device is a Samsung A7, and this device was designed used in portable devices that the minimum distance between human’s body is 5mm. Based on the 47CFR 2.1093, this device belongs to portable device. The definition of the category as following: Portable Derives: CFR Title 47 §2.1093(b) (b) For purposes of this section, a portable device is defined as a transmitting device designed to be used so that the radiating structure(s) of the device is/are within 20 centimeters of the body of the user. FCC KDB 447498 D01 General RF Exposure Guidance v06 Limit Unless specifically required by the published RF exposure KDB procedures, standalone 1‐g head or body and 10‐g extremity SAR evaluation for general population exposure conditions, by measurement or numerical simulation, is not required when the corresponding SAR Test Exclusion Threshold condition, listed below, is satisfied. These test exclusion conditions are based on source‐ based time‐averaged maximum conducted output power of the RF channel requiring evaluation, adjusted for tune‐up tolerance, and the minimum test separation distance required for the exposure conditions. The minimum test separation distance is determined by the smallest distance from the antenna and radiating structures or outer surface of the device, according to the host form factor, exposure conditions and platform requirements, to any part of the body or extremity of a user or bystander. The 1‐g and 10‐g SAR test exclusion thresholds for 100 MHz to 6 GHz at test separation distances ≤ 50 mm are determined by: [(max. power of channel, including tune‐up tolerance, mW) / (min. test separation distance, mm)] · [√f(GHz) ] ≤ 3.0 for 1‐g SAR and ≤ 7.5 for 10‐g extremity SAR Where • f (GHz) is the RF channel transmit frequency in GHz • Power and distance are rounded to the nearest mW and mm before calculation • The result is rounded to one decimal place for comparison The test exclusions are applicable only when the minimum test separation distance is ≤ 50 mm and for transmission frequencies between 100 MHz and 6 GHz. When the minimum test separation distance is < 5 mm, a distance of 5 mm is applied to determine SAR test exclusion. Test data BLUETOOTH: Conclusion: RF exposure Evaluation Results: Compliance ‐‐END OF REPORT‐‐ Operating Mode Channel (MHz) Maximum output power (dBm) Tune up tolerance (dBm) Max Tune Up Power (dBm) Distance (mm) Calculation results Limit BLE 2402 -1.71 -1.71±1 -0.71 5 0.263 3 2440 -2.14 -2.14±1 -1.14 5 0.240 3 2480 -3.15 -3.15±1 -2.15 5 0.192 3

Report No.: BL-SZ2090437-601 2 / 49 Revision History Version Issue Date Revisions Content Rev. 01 Oct. 30, 2020 Initial Issue TABLE OF CONTENTS 1 ADMINISTRATIVE DATA (GENERAL INFORMATION) .......................................................................... 5 1.1 Identification of the Testing Laboratory ....................................................................................... 5 1.2 Identification of the Responsible Testing Location ...................................................................... 5 1.3 Laboratory Condition ................................................................................................................... 5 1.4 Announce .................................................................................................................................... 5 2 PRODUCT INFORMATION ...................................................................................................................... 6 2.1 Applicant Information ................................................................................................................... 6 2.2 Manufacturer Information ............................................................................................................ 6 2.3 Factory Information ..................................................................................................................... 6 2.4 General Description for Equipment under Test (EUT) ................................................................ 6 2.5 Technical Information .................................................................................................................. 7 2.6 Additional Instructions ................................................................................................................. 8 3 SUMMARY OF TEST RESULTS .............................................................................................................. 9 3.1 Test Standards ............................................................................................................................ 9 3.2 Verdict ......................................................................................................................................... 9 4 GENERAL TEST CONFIGURATIONS ................................................................................................... 10 4.1 Test Environments .................................................................................................................... 10 4.2 Test Equipment List ................................................................................................................... 10 4.3 Measurement Uncertainty ......................................................................................................... 11 4.4 Description of Test Setup .......................................................................................................... 12 4.4.1 For Antenna Port Test ............................................................................................................... 12 4.4.2 For AC Power Supply Port Test ................................................................................................ 12 4.4.3 For Radiated Test (Below 30 MHz) ........................................................................................... 13 4.4.4 For Radiated Test (30 MHz-1 GHz) .......................................................................................... 13 4.4.5 For Radiated Test (Above 1 GHz) ............................................................................................. 14 4.5 Measurement Results Explanation Example ............................................................................. 15 4.5.1 For conducted test items: .......................................................................................................... 15 Report No.: BL-SZ2090437-601 3 / 49 4.5.2 For radiated band edges and spurious emission test: ............................................................... 15 5 TEST ITEMS ........................................................................................................................................... 16 5.1 Antenna Requirements .............................................................................................................. 16 5.1.1 Relevant Standards ................................................................................................................... 16 5.1.2 Antenna Anti-Replacement Construction .................................................................................. 16 5.1.3 Antenna Gain ............................................................................................................................ 16 5.2 Output Power ............................................................................................................................ 17 5.2.1 Test Limit ................................................................................................................................... 17 5.2.2 Test Setup ................................................................................................................................. 17 5.2.3 Test Procedure .......................................................................................................................... 17 5.2.4 Test Result ................................................................................................................................ 18 5.3 Occupied Bandwidth ................................................................................................................. 19 5.3.1 Limit ........................................................................................................................................... 19 5.3.2 Test Setup ................................................................................................................................. 19 5.3.3 Test Procedure ..................................…

Text truncated - open the document above for the full version.

Annex No.: BL-SZ2090437-AR 1 / 5 TEST SETUP PHOTOS 1 Radiated Test Photo Below 30MHz-BLE 30MHz-1GHz-BLE Annex No.: BL-SZ2090437-AR 2 / 5 Close-up-BLE Above 1GHz-BLE Annex No.: BL-SZ2090437-AR 3 / 5 Close-up-BLE 30MHz-1GHz-RF Annex No.: BL-SZ2090437-AR 4 / 5 Above 1GHz-RF Close-up-RF Annex No.: BL-SZ2090437-AR 5 / 5 2 Conducted Test Photo Conducted Test-BLE