2AVJ9-I-MX-2406-50KINK-DUAL-FLEX REMOTE VIBRATOR W/REMOTE-SILICONE/ABS BLACK INNER QTY 6

FEATURES 10POWERFUL VIBRATING FUNCTIONS AT EACH END 2 INDEPENDENTLY CONTROLLED MOTORS USB RECHARGEABLE FIRM, FLEXIBLE SILICONE 0 WARMS TO BODY TEMPATURE About This Product PHTHALATE·FREE, BODY SAFE HYPOALLERGENIC, NONPOROUS, AND ODORLESS PERFECT ERGONOMIC SIZE WIRELESS REMOTE Kink by Doc Johnson's Silicone Vibrator with Wireless Remote is a versatile product crafted in premium silicone with 10 powerful functions and designed to conveniently recharge with the included USB cable. The vibrator is flexible and can be used in a variety of ways to suit each user. To Turn Vibrations On: On the Vibrator: 1. Hold® 3 seconds until the LED light shows. 2. Press O or E) to start vibrations on each side. 3. Continue to press O or E) to independently change vibration patterns for that side. With the Wireless Remote: 4. After completing step 1, press® for 3 seconds until the LED display lights up. 5. Press O or E) to start vibrations on the corresponding side. 6. Continue to press O or E) to change vibration patterns. To Turn Vibrations Off: On the Vibrator: � old � fown O or E) to turn off individual side's v1brat1ons. Di e#: Tri-Fold Date: 09-12-19 Artist:RM Item#: INS-2406-50 Substrate: Paper COATING: Gloss (Overall) INKS: CMYK • TREATMENTS: OUTER TRI-FOLD To Charge: Plug charger into a USB power source and touch the magnetic charging end to the charging connections at the base of the Dual-Flex Vibrator. As your device charges, you will see a flashing LED light. You will know it's finished charging when the LED light remains steady and no longer flashes. CHARGING TIME: 3 HOURS USAGE TIME: 1 HOUR Connect the USB end into your preferred power source.a Magnetic Charger Connection • Connect Charger Here INNER TRI-FOLD * Wireless Remote uses2AAA batteries (not included) To Turn Vibrations Off: On Wireless Remote: 1. Hold down O or E) for 3 seconds to turn off one side's vibrations. 2. Hold ® for 3 seconds to turn both sides off. To Turn Toy Completely Off:: 1. Hold ® for 3 seconds until the LED display turns off. To avoid draining the battery charge, you must turn off both the remote and the toy. Care and Usage: Spray your Kink by Doc Johnson Silicone Vibrator with Wireless Remote with Doc Johnson Toy Cleaner or wash with mild soap and warm water. Allow to air-dry completely before storing separately from other toys in a cool, dry place. Use with water-based lubricant/glide. Doc Johnson Toy Cleaner sold separately. Safe, sane, and consensual (SSC) is one of the values surrounding ethically acceptable behavior in BDSM, kink, and alternative sexuality communities. Safe means that the risk of activities should be understood by all participants, taking all precautions to prevent accidents or injury. Sane is to undertake activities in a sensible and sane state of mind, undemanding the difference between fantasy and reality. Consensual means that all parties have freely and fully consented to the activity and were in a sound state of mind. WARNING FOR VIBRATING PRODUCTS: To avoid injury or aggravation of pre-existing conditions, this product should not be used on swollen or inflamed areas or skin lacerations. No medical claims are warranted or implied by the use of this product. Designed by Doc Johnson• in Los Angeles, California. Copyright© 2019 Doc Johnson Enterprises. All Rights Reserved. FOR WARRANTY INFORMATION AND PRODUCT REGISTRATION, PLEASE VISIT US ONLINE AT DOCJOHNSON.COM :ace - INS-2406-50 FCC ID: 2AVJ9-I-MX-2406-50 FCC Statement This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures: -- Reorient or relocate the receiving antenna. -- Increase the separation between the equipment and receiver. -- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. -- Consult the dealer or an experienced radio/TV technician for help. This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. Changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment.

Doc Johnson Enterprises DATE : 2020-01-07 Equipment Autorisation Division Federal Communications Commission 7435 Oakland Mills Road Columbia, MD 21046 FCC ID: 2AVJ9-I-MX-2406-50 Product Name: KINK - DUAL - FLEX REMOTE VIBRATOR W/REMOTE - SILICONE / ABS BLACK INNER QTY 6 Request for Confidentiality Pursuant to Sections 0.457 and 0.459 of the commissions rules, we hereby request that the following documents be held confidential: (List here the documents for which you are seeking confidentiality – for example ...)  Schematics  Block diagram  Operation description These materials contain trade secrets and proprietary information and are not customarily released to the public. The public disclosure of this information might be harmful to the company and provide unjustified benefits to our competitors.

DATE:2020-01-07 FederalCommunicationsCommission Authorization&EvaluationDivision 7345OaklandMillsRoad Columbia,Maryland21046 AuthoritytoActasAgent Onourbehalf,IappointJasonWuofGlobalUnitedTechnologyServicesCo.,Ltd.andNo.123- 128,TowerA,JinyuanBusinessBuilding,No.2,LaodongIndustrialZone,XixiangRoad,Baoan District,Shenzhen,Guangdong,Chinatoactasouragentinthepreparationofthis applicationforequipmentcertification.Icertifythatsubmitteddocumentsproperlydescribe thedeviceorsystemforwhichequipmentcertificationissought.Ialsocertifythateach unitmanufactured,importedormarketed,asdefinedintheFederalCommunications Commission’sregulationswillhaveaffixedtoitalabelidenticaltothatsubmittedfor approvalwiththisapplication. Forinstanceswhereourauthorizedagentsignstheapplicationforcertificationonour behalf,Iacknowledgethatallresponsibilityforcomplyingwiththetermsandconditions forcertification,stillresideswithDocJohnsonEnterprisesand11933VoseStreet,North Hollywood,CA91605,USA Signature: PaulGarrido Name:PaulGarrido Title:ComplianceAdministrator Company:DocJohnsonEnterprises

Size：11*5cm

RF Exposure evaluation According to 447498 D01 General RF Exposure Guidance v05 The 1-g and 10-g SAR test exclusion thresholds for 100 MHz to 6 GHz at test separation distances≤ 50 mm are determined by: [(max. power of channel, including tune-up tolerance, mW)/(min. test separation distance, mm)] ·[√f(GHz)] ≤ 3.0 for 1-g SAR and ≤ 7.5 for 10- g extremity SAR, where f(GHz) is the RF channel transmit frequency in GHz  Power and distance are rounded to the nearest mW and mm before calculation The result is rounded to one decimal place for comparison eirp = pt x gt = (EXd) 2 /30 where: pt = transmitter output power in watts, gt = numeric gain of the transmitting antenna (unitless), E = electric field strength in V/m, --- 10 ((dBuV/m)/20) /10 6 d = measurement distance in meters (m)---3m Sopt = (EXd) 2 /30 x gt Ant gain= 0 dBi ; so Ant numeric gain= 1 Field strength =74.42dBμV/m @3m So Pt={ [10 (74.42 /20) /10 6 x3] 2 /30x 1 }x1000 mW = 0.0083 mW So (0.0083 mW/5mm)x √0.43386 GHz = 0.0011 < 3 Then SAR evaluation is not required

Global United Technology Services Co., Ltd. Report No.: GTS201912000291F01 Authorized Signature: Robinson Lo Laboratory Manager This results shown in this test report refer only to the sample(s) tested, this test report cannot be reproduced, except in full, without prior written permission of the company. The report would be invalid without specific stamp of test institute and the signatures of compiler and approver. Page 1 of 17 Cover Page Test Report Applicant: Doc Johnson Enterprises Address of Applicant: 11933 Vose Street, North Hollywood, CA 91605, United States Manufacturer: Doc Johnson Enterprises Address of Manufacturer: 11933 Vose Street, North Hollywood, CA 91605, United States Equipment Under Test (EUT) Product Name: KINK - DUAL - FLEX REMOTE VIBRATOR W/REMOTE - SILICONE / ABS BLACK INNER QTY 6 Model No.: I-MX-2406-50 FCC ID: 2AVJ9-I-MX-2406-50 Applicable standards: FCC CFR Title 47 Part 15 Subpart C Section 15.231 Date of sample receipt: December 27, 2019 Date of Test: December 28, 2019-January 06, 2020 Date of report issued: January 07, 2020 Test Result : PASS * * In the configuration tested, the EUT complied with the standards specified above. Report No.: GTS201912000291F01 Global United Technology Services Co., Ltd. No.123-128, Tower A, Jinyuan Business Building, No.2, Laodong Industrial Zone, Xixiang Road, Baoan District, Shenzhen, Guangdong, China Telephone: +86 (0) 755 2779 8480 Fax: +86 (0) 755 2779 8960 Page 2 of 17 2 Version Version No. Date Description 01 January 07, 2020 Original Prepared By: Date: January 07, 2020 Project Engineer Check By: Date: January 07, 2020 Reviewer Report No.: GTS201912000291F01 Global United Technology Services Co., Ltd. No.123-128, Tower A, Jinyuan Business Building, No.2, Laodong Industrial Zone, Xixiang Road, Baoan District, Shenzhen, Guangdong, China Telephone: +86 (0) 755 2779 8480 Fax: +86 (0) 755 2779 8960 Page 3 of 17 3 Contents Page 1 COVER PAGE .......................................................................................................................................... 1 2 VERSION .................................................................................................................................................. 2 3 CONTENTS .............................................................................................................................................. 3 4 TEST SUMMARY ..................................................................................................................................... 4 4.1 MEASUREMENT UNCERTAINTY ............................................................................................................ 4 5 GENERAL INFORMATION ...................................................................................................................... 5 5.1 GENERAL DESCRIPTION OF EUT ......................................................................................................... 5 5.2 TEST MODE ........................................................................................................................................ 6 5.3 DESCRIPTION OF SUPPORT UNITS ....................................................................................................... 6 5.4 TEST FACILITY .................................................................................................................................... 6 5.5 TEST LOCATION ................................................................................................................................. 6 5.6 OTHER INFORMATION REQUESTED BY THE CUSTOMER ......................................................................... 6 5.7 ADDITIONAL INSTRUCTIONS ................................................................................................................. 6 6 TEST INSTRUMENTS LIST ..................................................................................................................... 7 7 TEST RESULTS AND MEASUREMENT DATA ...................................................................................... 9 7.1 RADIATED EMISSION METHOD ............................................................................................................. 9 7.1.1 Field Strength of The Fundamental Signal ................................................................................ 10 7.1.2 Spurious Emissions ................................................................................................................... 11 7.2 20DB OCCUPY BANDWIDTH .............................................................................................................. 15 7.3 DWELL TIME ..................................................................................................................................... 16 8 TEST SETUP PHOTO ............................................................................................................................ 17 9 EUT CONSTRUCTIONAL DETAILS ..................................................................................................... 17 Report No.: GTS201912000291F01 Global United Technology Services Co., Ltd. No.123-128, Tower A, Jinyuan Business Building, No.2, Laodong Industrial Zone, Xixiang Road, Baoan District, Shenzhen, Guangdong, China Telephone: +86 (0) 755 2779 8480 Fax: +86 (0) 755 2779 8960 Page 4 of 17 4 Test Summary Test Item Section in CFR 47 Result Antenna Requirement 15.203 Pass Conduction Emission 15.207 N/A Field strength of the Fundamental Signal 15.231 (b) Pass Spurious Emissions 15.231 (b)/15.209 Pass 20dB Bandwidth 15.231 (c) Pass Dwell Time 15.231 (a)1 Pass Pass: The EUT complies with the essential requirements in the standard. N/A: Not applicable. 4.1 Measurement Uncertainty Test Item Frequency Range Measurement Uncertainty Notes Radiated Emission 30MHz-200MHz 3.8039dB (1) Radiated Emission 200MHz-1GHz 3.9679dB (1) Radiated Emission 1GHz-18GHz 4.29dB (1) Radiated Emission 18GHz-40GHz 3.30dB (1) AC Power Line C…

Text truncated - open the document above for the full version.

Radiated Emission