2AVRVANT100TCROUTDOOR ANTENNA

100-Mile Range Outdoor/Attic Amplified TV Antenna ANT100TCR User Manual 2 Safety Precautions Before using this antenna, please read these instructions carefully. Store this manual in a safe place for future reference. Read the entire instruction manual before you start installation and assembly. If you have any questions regarding any of the instructions or warnings, please contact Customer Service. • Inspect your installation site carefully for power lines. Ensure that there is no possibility for your antenna or ladder to come into contact with power lines. • Make sure that the distance between power lines and your antenna and its mounting structure is at least two times the total height of your antenna and its mounting structure. There must be enough distance between the antenna and power lines, in the event that the antenna falls during or after assembly. • Ground the antenna and its mounting structure in compliance with the NEC electrical code, as well as all state and local electrical codes. • Do not use a metal ladder. • Do not install the antenna on a windy day. If the antenna begins to fall, do not attempt to catch it. Let it fall to the ground. • Never touch anything or anyone in contact with a power line. In case of emergency, call 911. • If you are unsure of how to safely install the antenna, please contact a professional in your area. 3 1. Main Unit 2. Motor 3. Carriage Bolt ( 3 / 16 ” x 1 5 / 8 ”) 4. Wing Nut ( 3 / 16 ”) 5. Power Supply 6. Remote Control 7. Coaxial Cable (25’) 8. Power Adapter 9. Bracket 10. J Pole 11. Expansion Screws x 4 12. Bolts & Nuts x 2 13. Self-tapping Screws x 2 I. Included Parts and Hardware 1234 5678 9 101112 13 4 360 ̊ Motorized Wireless Remote • Insert 2 AAA batteries (not included) into the remote before use. • Press the red directional buttons to rotate the antenna to reach the desired station. II. Power Supply III. System Connection Infrared Receiver LED Indicators Red Light TV1 Digital Converter Box (sold separately - for analog TVs only) Coaxial Cable Antenna TV2 Power on Green LightAntenna is rotating Yellow Light Something is wrong with the power supply. Check cable connection. Rotation Switch ANT TV1 TV2 AC Power Input LED Indicators Power On/Off 5 Make sure the distance between your location and TV transmitter tower is within 100 miles, and set up your antenna as high as possible in the direction of the TV tower for better reception. You can search for available channels in your area by visiting dtv.gov/maps or www.tvfool.com. IV. Key Considerations for Your Installation Site • Be sure that installation is in accordance with all local, city and state electrical and building codes. • Understand where broadcast towers are located in your area. Visit www.antennapoint.com or www.antennaweb.org and enter your zip code to identify the channels you can expect to receive. 80 miles 100 miles Outdoor antenna series Indoor antenna series Weaker signal reception area Weaker signal reception area Strong receivingarea Indoor & Outdoor antenna series 6 Step 1: Connect the Main Antenna and Motor Step 2: Attach Your Antenna to the J-Pole Step 3: Connect Your Antenna Align the motor with the main unit and secure them in place with the carriage bolt 3 and wing nut 4 . Place your antenna & motor assembly onto the J-pole 10 , and tighten the column until your antenna is secure. Tip: Keep a 20-inch clearance around your antenna so it can rotate properly. Using the included coaxial cable 7 , connect your antenna to the antenna input on the power supply box 5 . Connect the box to a power source (i.e. an electrical outlet) using the included wall adapter. If your TV has a digital tuner, simply connect the power supply box output cable directly to your TV’s cable input port. If your TV does not have a digital tuner, connect the power supply box output cable to your digital converter box, and then connect your converter box output cable to your TV. Connect the coaxial signal line from the motor to the main unit and tighten the fastener. 7 To perform a TV channel scan: • Set the tuner mode to “Antenna” or “Air” on your TV’s setup menu. • Set your TV to scan for channels. This may be listed as auto-program, auto-scan, channel search or channel scan. Move and rotate your antenna, and note which locations receive the most channels and best channel reception. Use the included remote to rotate your antenna to the desired position Note: Running a channel scan is not the same as pressing Channel UP/ DOWN on your remote. • Refer to your TV’s user manual for further details. Note: You must re-scan for channels anytime you move or reposition your antenna. Step 4: Scan for Channels 8 Make sure to test your antenna in multiple locations to find the best reception. Placing your antenna higher up or in a position that is angled toward the broadcast tower may result in better reception. Once you find the location that receives the most channels and best channel reception, you can mount the pole and antenna. Caution: Your mounting site must be clear of power lines. Do not attempt to mount your antenna near electric power lines. Note: If your walls are made of wood, do not use expansion screws. Use self-tapping screws instead. Place the bracket base on your wall and mark the corresponding points for the expansion screws and holes, based on the location. Secure the expansion or self-tapping screws into the bracket base holes. 1 2 Step 5: Mount Your Antenna Connect the pole to the base of the main unit assembly. Use the bolts and nuts to secure the pole to the mounted bracket. 3 9 This antenna can support two TVs at the same time. Simply connect an additional coaxial cable between the power supply box output connector and your second TV. Antenna Specifications: • 25’ coaxial cable • Easy install and setup • Remote control included • Built-in noise circuit • Built-in high-gain booster • 360 ̊ motorized rotation • UHF: 470-606MHz I 23±2dB • Impedance: 750Ω I F-connector • Noise figure…

Text truncated - open the document above for the full version.

DP AUDIO VIDEO LLC 03 March 2021 Federal Communications Commission 445 12 th Street SW Washington, DC 20554 Subject: Limited Agency Agreement DP AUDIO VIDEO LLC To Whom It May Concern: We, DP AUDIO VIDEO LLC, hereby authorized Intertek Testing Services to act as our Agent for the purpose of preparing application for FCC ID number under all applicable parts of the FCC rules and regulations. The effective date of this limited agency agreement is 03 March 2021. The Limited Agency Agreement expires on 03 March 2022, unless sooner terminated or extended by written notice to Intertek Testing Services and the Federal Communications Commission. This is to advise that we are in full compliance with the Anti-Drug Abuse Act. The applicant is not subject to a denial of federal benefits pursuant to Section 5301 of the Anti-Drug Act of 1988, 21 U.S.C. 862, and no party to the application is subject to a denial of federal benefits pursuant to that section. If you have any questions or comments, please do not hesitate to contact me. Sincerely, _________________ Roy Ryan General Manager FCC ID:2AVRVANT100TCR 2AVRVANT100TCR

1(2) DP AUDIO VIDEO LLC Attention: Certification reviewer RE: Request for Confidentiality FCC ID: 2AVRVANT100TCR To Whom It May Concern: Permanent Confidentiality [Complete this section if permanent confidentiality is requested] Request to withhold permanently from public review certain portions of the application for equipment certification for the referenced FCC identifiers. This request for confidentiality is made pursuant to 47 CFR 0.457(d) and 0.459 of the FCC Rules. In particular, the following sections of the application are to be kept permanently confidential: [Select one or more of items below, as appropriate] Schematics Block Diagrams Operational Description Tune-up Procedure Parts List Internal Photos (see note) Users Manual (see note) Note 1: Internal Photos may be held confidential 1) if the circuit board or internal components are not accessible to users. For example, it is acceptable if the circuit board is enclosed in epoxy. 2) Also, it is acceptable if the device is not accessible to the public, for example, a device mounted on the top of a large tower (or in a fenced enclosure) such that it is only serviceable by professional designated technicians under a Non-Disclosure Agreement (NDA). All sales for these devices must be under a NDA restricting the disclosure of the propriety information, including internal photos. Users Manual may be held confidential only when the manual contains proprietary technical information intended fRU SURfeVViRQal WechQiciaQV RbligaWed XQdeU a NDA. All ValeV aQd diVWUibXWiRQ Rf Whe XVeU¶V maQXal mXVW be XQdeU a NDA that restricts the disclosure of the information. In the application cover letter requesting permanent confidentiality the following additional description and the NDA exhibit is required: 1. Describe in detail how internal photos and/or users manual information are controlled to prevent them from becoming public or disclosed to unauthorized persons. 2. Describe how public access is restricted for products serviceable by professional designated technicians. 3. A statement that all sales of the non-consumer device will be under a NDA to include third party sales and that the final user of the device is subject to the NDA. 4. Provide an example of the NDA between the grantee and a purchaser. The request for confidentiality must Note 2: For scanning receiver, the schematics, block diagrams, operational description, tune-up procedure, parts list and internal photos are always held permanently confidential. Short-term Confidentiality [Complete this section if short-term confidentiality is requested] Request to withhold from public review for a period of [please enter 1 to 180] days from the date of the Grant of Equipment Authorization and prior to marketing, certain portions of the application for equipment certification for the referenced FCC identifiers. This request for confidentiality is made pursuant to 47 CFR 0.457(d) and 0.459 of the FCC Rules. In particular, the following sections of the application are to be kept short-term confidential for a period above from the date of the grant [Select one or more of items below that are not selected in the list above, as appropriate] Schematics Block diagrams Operational Description 2(2) Tune-up Procedure Parts List Test Setup Photos External Photos Internal Photos Users Manual Rationale for request for confidentiality: We have invested considerable time and materials in research and development to produce the referenced product. Permanent confidentiality: Disclosure of the permanently confidential portions of this application to competitors would not only give them significant competitive advantages in developing similar products, but would also disclose successful implementation of unpublished, leading edge technology developed by us. Short-term confidentiality: Disclosure of the short-term confidential portions of this application during the period of importation and/or distribution would reveal key aspects of proprietary technology to competitors and diminish the value of our investment in research and development. If you have questions or need further information, please contact the undersigned. Sincerely, _________________ Roy Ryan 03 March 2021 General Manager

Page 1 of 2 TEST REPORT Amplifier Page 2 of 2 TEST REPORT

Outdoor TV Antenna Made in VietnamFCC ID: 2AVRVANT100TCR Model: ANT100TCR Output impedance: 75 ohm 44.6mm 20.96 mm Label Location

Page 1 of 5 TEST REPORT Page 2 of 5 TEST REPORT Page 3 of 5 TEST REPORT Page 4 of 5 TEST REPORT Page 5 of 5 TEST REPORT

DP AUDIO VIDEO LLC TEST REPORT SCOPE OF WORK FCC Testing–ANT100TCR REPORT NUMBER 210225001SZN-001 ISSUE DATE [REVISED DATE] 10 March 2021 [---------------------] PAGES 17 DOCUMENT CONTROL NUMBER FCC ID JBP_B © 2017 INTERTEK Intertek Report No.: 210225001SZN-001 This report is for the exclusive use of Intertek's Client and is provided pursuant to the agreement between Intertek and its Client. Intertek's responsibility and liability are limited to the terms and conditions of the agreement. Intertek assumes no liability to any party, other than to the Client in accordance with the agreement, for any loss, expense or damage occasioned by the use of this report. Only the Client is authorized to permit copying or distribution of this report and then only in its entirety. Any use of the Intertek name or one of its marks for the sale or advertisement of the tested material, product or service must first be approved in writing by Intertek. The observations and test results in this report are relevant only to the sample tested. This report by itself does not imply that the material, product, or service is or has ever been under an Intertek certification program. Intertek Testing Service Shenzhen Ltd. Longhua Branch 101, 201, Building B, No. 308 Wuhe Avenue, Zhangkengjing Community, GuanHu Subdistrict, LongHua District, Shenzhen, P.R. China. Tel: (86 755) 8601 6288 Fax: (86 755) 8601 6751 Version: 01-November-2017 Page: 1 of 17 FCC ID JBP_B Test Report DP AUDIO VIDEO LLC Application For Certification FCC ID: 2AVRVANT100TCR OUTDOOR ANTENNA Model: ANT100TCR Brand Name: Core Innovations Part 15 Class B Digital Devices Report No.: 210225001SZN-001 Prepared and Checked by: Approved by: Winkey Wang Senior Project Engineer Peter Kang Senior Technical Supervisor Date: 10 March 2021 Intertek Report No.: 210225001SZN-001 Version: 01-November-2017 Page: 2 of 17 FCC ID JBP_B Test Report MEASUREMENT / TECHNICAL REPORT This report concerns (check one:) Original Grant X Class I Change Equipment Type: JAB - Part 15 Class B Digital Devices(Other Class B digital devices & peripherals) Deferred grant requested per 47 CFR 0.457(d)(1)(ii)? Yes No X If yes, defer until: date Company Name agrees to notify the Commission by: date of the intended date of announcement of the product so that the grant can be issued on that date. Transition Rules Request per 15.37? Yes No X If no, assumed Part 15, Subpart B for unintentional radiator − the new 47 CFR [10-01-19 Edition] provision. Report prepared by: Winkey Wang Intertek Testing Services Shenzhen Ltd. Longhua Branch 101, 201, Building B, No. 308 Wuhe Avenue, Zhangkengjing Community, GuanHu Subdistrict, LongHua District, Shenzhen, P.R. China Phone: 86-755-8614 0684 Fax: 86-755-8601 6751 Intertek Report No.: 210225001SZN-001 Version: 01-November-2017 Page: 3 of 17 FCC ID JBP_B Test Report Table of Contents 1.0 SUMMARY OF TEST RESULT ....................................................................................... 4 2.0 General Description ................................................................................................... 5 2.1 Product Description ........................................................................................... 5 2.2 Related Submittal(s) Grants ................................................................................ 5 2.3 Test Methodology ............................................................................................. 5 2.4 Test Facility ...................................................................................................... 5 3.0 System Test Configuration ......................................................................................... 6 3.1 Justification ...................................................................................................... 6 3.2 EUT Exercising Software ..................................................................................... 6 3.3 Special Accessories ............................................................................................ 6 3.4 Equipment Modification .................................................................................... 6 3.5 Measurement Uncertainty ................................................................................. 6 3.6 Support Equipment List and Description .............................................................. 7 4.0 Emission Results ....................................................................................................... 8 4.1 Field Strength Calculation .................................................................................. 8 4.2 Radiated Emission Configuration Photograph ...................................................... 9 4.3 Radiated Emission Data ..................................................................................... 9 4.4 Conducted Emission at Mains Terminal ............................................................. 12 4.5 Conducted Emission Data................................................................................. 12 5.0 Equipment Photographs .......................................................................................... 15 6.0 Product Labelling .................................................................................................... 15 7.0 Technical Specifications ........................................................................................... 15 8.0 Instruction Manual .................................................................................................. 15 9.0 Miscellaneous Information ...................................................................................... 16 9.1 Emissions Test Procedures ............................................................................... 16 10.0 Test Equipment List .............................................................................................. 17 Intertek Report No.: 210225001SZN-001 Version: 01-November-2017 Page: 4 …

Text truncated - open the document above for the full version.

Page 1 of 1 TEST REPORT RADIATED EMISSION TEST SET-UP Front View Back View

Page 1 of 1 TEST REPORT CONDUCTED EMISSION TEST SET-UP Front View Slide View