2AVSADH19R-8Immobilizer system (Immobilizer, RKE and TPMS)

Manual Requirement of FCC Model: DH19R-8 Our product is one of vehicle parts incorporated into the vehicle as original equipment. We will include following statements in the user manual of the vehicle in accordance with FCC requirements. 1. Requirement for User manual of the vehicle 1.1. FCC Requirement In accordance with 15.21 of FCC rule, following statement will be included in the user manual of the vehicle. FCC WARNING Changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment. In accordance with requirement of FCC§15.19(a)(3), following statement will be included in the user manual of the vehicle. NOTE This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.

Date: FCC ID: 2AVSADH19R‐8 To: Federal Communications Commission Authorization and Evaluation Division 7435 Oakland Mills Road Columbia, MD 21046 USA Sincerely, Tel: 81‐72‐754‐5619 Raita Nakanishi General Manager CFR 47 §2.911 (d)(5) Attestation DAIHATSU MOTOR CO., LTD. (“the applicant”) certifies that, as of the date of the filing of this application, the applicant is not identified on the Covered List as an entity producing “covered” equipment. 13/06/2023 DAIHATSU MOTOR CO., LTD. (“the applicant”) certifies that as of the date of the application the equipment for which autho rization is sought is not “covered” equipment prohibited from receiving an e quipment authorization pursuant to section 2.903 of the FCC rules. DAIHATSU MOTOR CO., LTD. If the equipment for which the applicant seeks authorization is produced by any of the entities identified on the current Covered List, including affiliates or subsidiaries of the named companies, the applicant must include an explanation on why the equipment is no t “covered” equipment. Additional Explanation: (Not applicable)

U.S. Agent Designation for Service of Process ATTENTION: Federal Communications Commission Authorization and Evaluation Division 7435 Oakland Mills Road Columbia, MD 21046 USA REGARDING: FCC Certification – Section 2.911(d)(7) Information Designated U.S. Agent Company Name: Approve‐IT, Inc. Contact Name: Nathan Grinager Street Address: 8011 34 th Ave South, Suite 342 City/Province/Zip: Bloomington, MN 55425 Telephone No: 651‐247‐1678 Email: team@approve‐it.net FRN #: 0027533835 This letter is to confirm that we (“the Designated U.S. Agent) have accepted the responsibility to act as the Designated U.S. Agent for Service of Process as required by section 47 CFR 2.911(d)(7) on behalf of the Applicant noted below. U.S. Agent Signature: Date: Signed by (Printed Name /Title): N athan Grinager / Co‐President *This letter must be dated within 5 years of the date the application is submitted to the TCB for device certification The Applicant confirms its explicit consent and acknowledges that they must maintain an agent for no less than one year after terminating all marketing and importation OR the conclusion of any Commission‐related proceeding involving the equipment. The applicant further acknowledges their responsibility to inform the FCC whenever the Designated U.S. Agent information above changes. Applicant Company name : DAI HATSU MOTOR CO., LTD FCC ID: 2AVSADH19R‐8 Contact Name: Raita Nakanishi Street Address: 1‐1, Momozono 2‐Chome Ikeda City City/Province/Zip: Osaka / 563‐8651, JAPAN Telephone No: 81‐72‐754‐5619 Email: [email protected] Grantee FRN #: 0029269370 Applicant Signature: Date: June 13, 2023 Signed by (Printed Name/Title): Raita Nakanishi/General Manager July 6th, 2023

Date: UL Verification Services Inc. 47173 Benicia Street, Fremont, CA 94538 FCC IC: Applicant: To whom it may concern: Any and all acts carried out by UL Japan, Inc. on our behalf shall have the same effect as acts of our own. Sincerely, DAIHATSU MOTOR CO., LTD. DAIHATSU MOTOR CO., LTD. Raita Nakanishi General Manager Letter of Authorization We, the undersigned, hereby certify that we are not subject to a denial of federal benefits, that includes FCC benefits, pursuant to Section 5301 of the Anti‐Drug Abuse Act of 1988, 21 U.S.C. 862. This authorization is valid until further written notice from the applicant. The application for the subject equipment has no t been submitted to another TCB for certification. DAIHATSU MOTOR CO., LTD. 2AVSADH19R‐8 13/06/2023 We, the undersigned, hereby authorize Rie Fujiwara of Consumer, Medical & Information Technologies Division, UL Japan, Inc. to act on our behalf in all manners relating to application for equipment authorization, including signing of all documents relating to th ese matters.

Date: UL Verification Services Inc. 47173 Benicia Street, Fremont, CA 94538 FCC IC: Applicant: Sincerely, DAIHATSU MOTOR CO., LTD. DAIHATSU MOTOR CO., LTD. Request for Confidentiality Schematic Diagram Raita Nakanishi General Manager 13/06/2023 2AVSADH19R‐8 DAIHATSU MOTOR CO., LTD. Please be advised that the following information is to be held confidential on behalf of DAIHATSU MOTOR CO., LTD., referring to the FCC rules 0.457 and 0.459: Block Diagram Theory of Operation Parts List The application contains technical information which DAIHATSU MOTOR CO., LTD. d eems to be trade secrets and proprietary. If made public, the information might be used to the disadvantage of the applicant in the market place.

DAIHATSU MOTOR CO., LTD. Immobilizer s ystem (Immobilizer, RKE and TPMS) FCC ID: 2AVSADH19R-8 External Photos: Junction Box 1/2 Front Rear Note： Connectors shown with *1 may not be mounted. If connectors are not mounted, the holes of case are closed. *1 *1 DAIHATSU MOTOR CO., LTD. Immobilizer s ystem (Immobilizer, RKE and TPMS) FCC ID: 2AVSADH19R-8 External Photos: Junction Box 2/2 To p Bottom Left Right Note : The outer appearance may be changed. DAIHATSU MOTOR CO., LTD. Immobilizer s ystem (Immobilizer, RKE and TPMS) FCC ID: 2AVSADH19R-8 External Photos: Commected Junction Box with Immobilizer antenna

Product: Immobilizer system (Immobilizer, RKE and TPMS) Model: DH19R-8 Marking location: Note: Compliance statement of marking will not be changed. Marking layout, size and other indications maybe changed and added. Marking is embossed, printed with laser marking or labeled. In case the label is embossed or printed with laser, the label is durable within the product life. In case the label is affixed with an adhesive, the label will not peel off within the product life. The outer case may be changed. 8 8

DAIHATSU MOTOR CO., LTD. Immobilizer s ystem (Immobilizer, RKE and TPMS) FCC ID: 2AVSADH19R-8 Internal Photos: Junction Box Component side Solder side Note: Connectors shown with *1 may not be mounted. Antenna for Rx *1

Test Report No. 14842184H-B Page 1 of 26 UL Japan, Inc. Ise EMC Lab. 4383-326 Asama-cho, Ise-shi, Mie-ken 516-0021 Japan / +81-596-24-8999 EMI TEST REPORT Test Report No. 14842184H-B Customer DAIHATSU MOTOR CO.,LTD. Description of EUT Immobilizer system (Immobilizer, RKE and TPMS) Model Number of EUT DH19R-8 FCC ID 2AVSADH19R-8 Test Regulation FCC Part 15 Subpart B Test Result Complied Issue Date July 11, 2023 Remarks - Representative test engineer Approved by Hiroyuki Furutaka Engineer Tsubasa Takayama Leader CERTIFICATE 5107.02 The testing in which "Non-accreditation" is displayed is outside the accreditation scopes in UL Japan, Inc. There is no testing item of "Non-accreditation". Report Cover Page - Form-ULID-003532 (DCS:13-EM-F0429) Issue# 22.0 Test Report No. 14842184H-B Page 2 of 26 UL Japan, Inc. Ise EMC Lab. 4383-326 Asama-cho, Ise-shi, Mie-ken 516-0021 Japan / +81-596-24-8999 ANNOUNCEMENT REVISION HISTORY Original Test Report No. 14842184H-B Revision Test Report No. Date Page Revised Contents - (Original) 14842184H-B July 11, 2023 -  This test report shall not be reproduced in full or partial, without the written approval of UL Japan, Inc.  The results in this report apply only to the sample tested. (Laboratory was not involved in sampling.)  This sample tested is in compliance with the limits of the above regulation.  The test results in this test report are traceable to the national or international standards.  This test report must not be used by the customer to claim product certification, approval, or endorsement by the A2LA accreditation body.  This test report covers EMC technical requirements. It does not cover administrative issues such as Manual or non-EMC test related Requirements. (if applicable)  The all test items in this test report are conducted by UL Japan, Inc. Ise EMC Lab.  The opinions and the interpretations to the result of the description in this report are outside scopes where UL Japan, Inc. has been accredited.  The information provided from the customer for this report is identified in SECTION 1.  For test report(s) referred in this report, the latest version (including any revisions) is always referred. Test Report No. 14842184H-B Page 3 of 26 UL Japan, Inc. Ise EMC Lab. 4383-326 Asama-cho, Ise-shi, Mie-ken 516-0021 Japan / +81-596-24-8999 Reference: Abbreviations (Including words undescribed in this report) A2LA The American Association for Laboratory Accreditation GPS Global Positioning System AAN Asymmetric Artificial Network Hori. Horizontal AC Alternating Current ICES Interference-Causing Equipment Standard AM Amplitude Modulation I/O Input/Output AMN Artificial Mains Network IEC International Electrotechnical Commission Amp, AMP Amplifier IEEE Institute of Electrical and Electronics Engineers ANSI American National Standards Institute IF Intermediate Frequency Ant, ANT Antenna ILAC International Laboratory Accreditation Conference AP Access Point ISED Innovation, Science and Economic Development Canada ASK Amplitude Shift Keying ISN Impedance Stabilization Network Atten., ATT Attenuator ISO International Organization for Standardization AV Average JAB Japan Accreditation Board BPSK Binary Phase-Shift Keying LAN Local Area Network BR Bluetooth Basic Rate LCL Longitudinal Conversion Loss BT Bluetooth LIMS Laboratory Information Management System BT LE Bluetooth Low Energy LISN Line Impedance Stabilization Network BW BandWidth MRA Mutual Recognition Arrangement C.F Correction Factor N/A Not Applicable Cal Int Calibration Interval NIST National Institute of Standards and Technology CAV CISPR AV NS No signal detect. CCK Complementary Code Keying NSA Normalized Site Attenuation CDN Coupling Decoupling Network OBW Occupied BandWidth Ch., CH Channel OFDM Orthogonal Frequency Division Multiplexing CISPR Comite International Special des Perturbations Radioelectriques PER Packet Error Rate Corr. Correction PK Peak CPE Customer premise equipment P LT long-term flicker severity CW Continuous Wave POHC(A) Partial Odd Harmonic Current DBPSK Differential BPSK Pol., Pola. Polarization DC Direct Current PR-ASK Phase Reversal ASK DET Detector P ST short-term flicker severity D-factor Distance factor QAM Quadrature Amplitude Modulation Dmax maximum absolute voltage change during an observation period QP Quasi-Peak DQPSK Differential QPSK QPSK Quadrature Phase Shift Keying DSSS Direct Sequence Spread Spectrum r.m.s., RMS Root Mean Square DUT Device Under Test RBW Resolution BandWidth EDR Enhanced Data Rate RE Radio Equipment e.i.r.p., EIRP Equivalent Isotropically Radiated Power REV Reverse EM clamp Electromagnetic clamp RF Radio Frequency EMC ElectroMagnetic Compatibility RFID Radio Frequency Identifier EMI ElectroMagnetic Interference RNSS Radio Navigation Satellite Service EMS ElectroMagnetic Susceptibility RSS Radio Standards Specifications EN European Norm Rx Receiving e.r.p., ERP Effective Radiated Power SINAD Ratio of (Signal + Noise + Distortion) to (Noise + Distortion) ETSI European Telecommunications Standards Institute S/N Signal to Noise ratio EU European Union SA, S/A Spectrum Analyzer EUT Equipment Under Test SG Signal Generator Fac. Factor SVSWR Site-Voltage Standing Wave Ratio FCC Federal Communications Commission THC(A) Total Harmonic Current FHSS Frequency Hopping Spread Spectrum THD(%) Total Harmonic Distortion FM Frequency Modulation TR, T/R Test Receiver Freq. Frequency Tx Transmitting FSK Frequency Shift Keying VBW Video BandWidth Fund Fundamental Vert. Vertical FWD Forward WLAN Wireless LAN GFSK Gaussian Frequency-Shift Keying xDSL Generic term for all types of DSL technology GNSS Global Navigation Satellite System (DSL: Digital Subscriber Line) Test Report No. 14842184H-B Page 4 of 26 UL Japan, Inc. Ise EMC Lab. 4383-326 Asama-cho, Ise-shi, Mie-ken 516-0021 Japan / +81-596-24-8999 CONTENTS PAGE SECTION 1: Customer information ......................................................................................... 5 SECTION 2: Equip…

Text truncated - open the document above for the full version.

Test Report No. 14842184H-B Page 22 of 26 UL Japan, Inc. Ise EMC Lab. 4383-326 Asama-cho, Ise-shi, Mie-ken 516-0021 Japan / +81-596-24-8999 APPENDIX 3: Photographs of test setup Radiated Emission Mode 1 (Below 1 GHz) Photo 1 Photo 2 Test Report No. 14842184H-B Page 23 of 26 UL Japan, Inc. Ise EMC Lab. 4383-326 Asama-cho, Ise-shi, Mie-ken 516-0021 Japan / +81-596-24-8999 Radiated Emission Mode 2 (Below 1 GHz) Photo 1 Photo 2 Test Report No. 14842184H-B Page 24 of 26 UL Japan, Inc. Ise EMC Lab. 4383-326 Asama-cho, Ise-shi, Mie-ken 516-0021 Japan / +81-596-24-8999 Radiated Emission Mode 1 (Above 1 GHz) Photo 1 Photo 2 Test Report No. 14842184H-B Page 25 of 26 UL Japan, Inc. Ise EMC Lab. 4383-326 Asama-cho, Ise-shi, Mie-ken 516-0021 Japan / +81-596-24-8999 Radiated Emission Mode 2 (Above 1 GHz) Photo 1 Photo 2 Test Report No. 14842184H-B Page 26 of 26 UL Japan, Inc. Ise EMC Lab. 4383-326 Asama-cho, Ise-shi, Mie-ken 516-0021 Japan / +81-596-24-8999 Worst Case Position (Horizontal: X-axis / Vertical: X-axis) RKE TPMS X-axis X-axis Y-axis Y-axis Z-axis Z-axis End of Report