2AVSB-AC-1015W Fast Wireless Car Charger

AC-1015W用户手册（产品说明书） 尺寸： 350*100mm 单面印刷材质 ： 15 7克铜版纸 User Manual 15W Fast Wireless Car Charger Product Features 1. Top backside touch button, touch to open and easy for one hand operation. Charging indicator on both sides, and the small square LED indicator in the middle indicates the center position of the internal coil. 2. Built-in wireless charging transmitter coil, the two arms and feet will automatic closing when put the phone on the charger, The transmitter coil automatically starts to find the mobile phone charging coil, and the mobile phone starts wireless charging after coil precise alignment 3. Suitable for different size phones,anti-slip silicone on both arms and feet,Type-C charging port 4. Built-in stepper motor, it works with low noise. 5. NPO capacitors,lower charging temperature and high charging efficiency. 6. Standby mode: the green and blue LED indicator light flashes alternatively.then the green indicator light keeps on 7. Charging mode: the blue LED indicator light keeps on,the light turns to green if remove the receiver 8. FOD function: when put metal or magnet objects on the charger, the blue and green LED indicator light will flash for reminding 9. Perfect protective function based on over-voltage, over-current, over-temperature and short-circuit protection. Specifications 心 ��� t I � 盂盓 ;:1 5 /;:; 心 � 7A , 5V / 2 A Product Standard Q , Charging Distance'- 10mm Charging Efficiency'-80% Product Dimension 4>71_35•75_65•1 2 7.15mm Product Material ABS+ Tempered Glass/Leather 淡Fast wireless charging requires QC2.0/3.0 quick car charger Product Parts Description 1 Adjustable Side Arms Telescopic Support Pole Suction Cup Product Parts Description 2 Product Operating Guide 1. Please make sure the product connect to the power before using. 2. The green LED indicator light on if connected with power 3. The LED indicator light will flashes and the product stop charg 叩 when the current is too large or there is foreign ob」ect.Do not wireless charging the phone if similar situation happened 4. Please touch the backside power button to open the two arms, the wireless charging start and the two arms/feet will closing automatically once you put the phone on the charger. Only need to touch the power button again to release two arms and easily remove the phone. 5. Please purchase the wireless receiver module or case separately (Not included in the product) if your phone do not support wireless charging Attention 1.Please do not vigorously extrude or collide. 2.Please do not dismantle or put it into fire or water when the product is power on,to avoid short circuit or leakage 3.Please do not use it in severely high temperature.high humidity or corrosive environment.to avoid damage to the circuit leakage. 4.Please do not put the magnetic strip or chip card (Such as ID card.bankcard etc.)on the charging pad to avoid to cause magneticcard lose efficacy 5.Please do not put the metal (Such as coin etc.) on the charging pad when charging.to avoid damage from heating FCC Warning This device complies with part 15 of the FCC Rules. Operation 1s subject to the following two cond巾ons:(1)This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation Any Changes or mod巾cationsnot expressly approved by the party responsible for compliance could void the user's authority to operate the equipment This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures -Reorient or relocate the receiving antenna. -Increase the separation between the equipment and receiver -Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. -Consult the dealer or an experienced radio(fV technician for help FCC RF exposure statement: The equipment complies with FCC radiation exposure limits set f orth for an uncontrolled environment. During the operation of device a distance of 15 cm surrounding the device and 20 cm above the top surface of the device must be respected.

Shenzhen Mgctech Co., Ltd. Model difference statement Product Name: 15W Fast Wireless Car Charger Model No.: AC-10, AC-20, AC-30, AC-40, AC-50, AC-60, AC-70,AC-80, AC-90, AW-Z9729 We (Shenzhen Mgctech Co., Ltd., 401, Bldg.14, No. 48-12, Fuchengao Rd., Pinghu Street, Longgang District, Shenzhen, Guangdong.) hereby state that all the models are of the same circuit and RF module, except the appearance material and model No., the appearance material of the product has leather surface and smooth surface. Signature: Name: Cici Huang Title: Overseas Sales Manager Tel: 0755-28266187 Email: [email protected] Date: 6.3.2021

C5266091_X8_Ed.1 1/1 Letter of Authorization Company: Shenzhen Mgctech Co., Ltd. Address: 401, Bldg.14, No. 48-12, Fuchengao Rd., Pinghu Street, Longgang District, Shenzhen, Guangdong Product Name: 15W Fast Wireless Car Charger Model Number: AC-10, AC-20, AC-30, AC-40, AC-50, AC-60, AC-70, AC-80, AC-90, AW-Z9729 FCC Identifier: 2AVSB-AC -10 We authorize LGAI Technological Center S.A., Ronda de la Font del Carme, s/n, 08193 Bellaterra, Spain, to act on our behalf on all matters concerning the above named equipment. Any individual within LGAI Technological Center S.A. is authorized to act on our behalf and take action on the application. We declare that authorize LGAI Technological Center S.A., Ronda de la Font del Carme, s/n, 08193 Bellaterra, Spain, is allowed to forward all information related to the approval project to the Federal Communication Commission and to discuss any issues concerning the approval application. Any and all acts carried out by LGAI Technological Center S.A. on our behalf shall have the same effect as acts of our own. Name: Cici Huang Date: 5/31/2021 Title: Overseas Sales Manager Signature of applicant:

C5266091_X10_Ed.1 1/1 Shenzhen Mgctech Co., Ltd. Office of Engineering Technology Federal Communications Commission 7435 Oakland Mills Road Columbia, MD 21046 Date: 5/31/2021 Subject: Request for Confidentiality FCC ID: 2AVSB-AC-10 To Whom It May Concern, Pursuant to the provisions of Sections 0.457 and 0.459 of Commission's rules (47CFR0.457, 0.459), we are requesting the Commission to withhold the following attachment(s) as confidential document from public disclosure. Exhibits Long-Term Confidentiality Short-Term Confidentiality ID Label/Location No No Attestation Statement No No External Photos No Block Diagram Schematics Test Report No No Test Setup Photos No User’s Manual Internal Photos Parts List / Tune Up RF Exposure Info Operational Description Cover Letter(s) No No SDR Software / Security Info No Above mentioned document contains detailed system and equipment description are considered as proprietary information in operation of the equipment. The public disclosure of above documents might be harmful to our company and would give competitor an unfair advantage in the market. It is our understanding that all measurement test reports, FCC ID label format and correspondent during certification review process cannot be granted as confidential documents and those information will be available for public review once the grant of equipment authorization is issued. Sincerely, Signature: Name: Cici Huang Date: 5/31/2021 Title: Overseas Sales Manager

1 - Page 1 of 5 - Address: 101, No. 7, Zone 2, Xinxing Industrial Park, Fuhai Avenue, Xinhe Community, Fuhai Street, Bao’ an District, Shenzhen, Guangdong, China. Te l : (86-755)88850135 Fax: (86-755) 88850136 Web:www.mtitest.com E-mail: [email protected] APPENDIX 1- EUT PHOTO Photo 1 (For model AC-10) Photo 2 1 - Page 2 of 5 - Address: 101, No. 7, Zone 2, Xinxing Industrial Park, Fuhai Avenue, Xinhe Community, Fuhai Street, Bao’ an District, Shenzhen, Guangdong, China. Te l : (86-755)88850135 Fax: (86-755) 88850136 Web:www.mtitest.com E-mail: [email protected] Photo 3 Photo 4 1 - Page 3 of 5 - Address: 101, No. 7, Zone 2, Xinxing Industrial Park, Fuhai Avenue, Xinhe Community, Fuhai Street, Bao’ an District, Shenzhen, Guangdong, China. Te l : (86-755)88850135 Fax: (86-755) 88850136 Web:www.mtitest.com E-mail: [email protected] Photo 5 Photo 6 1 - Page 4 of 5 - Address: 101, No. 7, Zone 2, Xinxing Industrial Park, Fuhai Avenue, Xinhe Community, Fuhai Street, Bao’ an District, Shenzhen, Guangdong, China. Te l : (86-755)88850135 Fax: (86-755) 88850136 Web:www.mtitest.com E-mail: [email protected] Photo 7 Photo 8 1 - Page 5 of 5 - Address: 101, No. 7, Zone 2, Xinxing Industrial Park, Fuhai Avenue, Xinhe Community, Fuhai Street, Bao’ an District, Shenzhen, Guangdong, China. Te l : (86-755)88850135 Fax: (86-755) 88850136 Web:www.mtitest.com E-mail: [email protected] Photo 9

1 - Page 1 of 6 - Address: 101, No. 7, Zone 2, Xinxing Industrial Park, Fuhai Avenue, Xinhe Community, Fuhai Street, Bao’ an District, Shenzhen, Guangdong, China. Te l : (86-755)88850135 Fax: (86-755) 88850136 Web:www.mtitest.com E-mail: [email protected] APPENDIX 1- EUT PHOTO Photo 1 (For model AC-10) Photo 2 1 - Page 2 of 6 - Address: 101, No. 7, Zone 2, Xinxing Industrial Park, Fuhai Avenue, Xinhe Community, Fuhai Street, Bao’ an District, Shenzhen, Guangdong, China. Te l : (86-755)88850135 Fax: (86-755) 88850136 Web:www.mtitest.com E-mail: [email protected] Photo 3 Photo 4 1 - Page 3 of 6 - Address: 101, No. 7, Zone 2, Xinxing Industrial Park, Fuhai Avenue, Xinhe Community, Fuhai Street, Bao’ an District, Shenzhen, Guangdong, China. Te l : (86-755)88850135 Fax: (86-755) 88850136 Web:www.mtitest.com E-mail: [email protected] Photo 5 Photo 6 1 - Page 4 of 6 - Address: 101, No. 7, Zone 2, Xinxing Industrial Park, Fuhai Avenue, Xinhe Community, Fuhai Street, Bao’ an District, Shenzhen, Guangdong, China. Te l : (86-755)88850135 Fax: (86-755) 88850136 Web:www.mtitest.com E-mail: [email protected] Photo 7 Photo 8 Wireless charge ANT 1 - Page 5 of 6 - Address: 101, No. 7, Zone 2, Xinxing Industrial Park, Fuhai Avenue, Xinhe Community, Fuhai Street, Bao’ an District, Shenzhen, Guangdong, China. Te l : (86-755)88850135 Fax: (86-755) 88850136 Web:www.mtitest.com E-mail: [email protected] Photo 9 Photo 10 1 - Page 6 of 6 - Address: 101, No. 7, Zone 2, Xinxing Industrial Park, Fuhai Avenue, Xinhe Community, Fuhai Street, Bao’ an District, Shenzhen, Guangdong, China. Te l : (86-755)88850135 Fax: (86-755) 88850136 Web:www.mtitest.com E-mail: [email protected] Photo 11

Address: 101, No. 7, Zone 2, Xinxing Industrial Park, Fuhai Avenue, Xinhe Community, Fuhai Street, Bao’ an District, Shenzhen, Guangdong, China. Tel: (86-755)88850135 Fax: (86-755) 88850136 Web:www.mtitest.com E-mail: [email protected] RF EXPOSURE Test Report Report No.: MTi210507015-04E2 Date of issue: May 25, 2021 Applicant: Shenzhen Mgctech Co., Ltd. Product name: 15W Fast Wireless Car Charger Model(s): AC-10, AC-20, AC-30, AC-40, AC-50, AC-60, AC-70,AC-80, AC-90, AW-Z9729 FCC ID: 2AVSB-AC-10 Shenzhen Microtest Co., Ltd. http://www.mtitest.com - Page 2 of 11 - Report No.: MTi210507015-04E2 Address: 101, No. 7, Zone 2, Xinxing Industrial Park, Fuhai Avenue, Xinhe Community, Fuhai Street, Bao’ an District, Shenzhen, Guangdong, China. Tel: (86-755)88850135 Fax: (86-755) 88850136 Web:www.mtitest.com E-mail: [email protected] Instructions 1. The report shall not be partially reproduced without the written consent of the laboratory; 2. The test results of this report are only responsible for the samples submitted; 3. This report is invalid without the seal and signature of the laboratory; 4. This report is invalid if transferred, altered or tampered with in any form without authorization; 5. Any objection to this report shall be submitted to the laboratory within 15 days from the date of receipt of the report. - Page 3 of 11 - Report No.: MTi210507015-04E2 Address: 101, No. 7, Zone 2, Xinxing Industrial Park, Fuhai Avenue, Xinhe Community, Fuhai Street, Bao’ an District, Shenzhen, Guangdong, China. Tel: (86-755)88850135 Fax: (86-755) 88850136 Web:www.mtitest.com E-mail: [email protected] TEST RESULT CERTIFICATION Applicant’s name .................... : Shenzhen Mgctech Co., Ltd. Address .................................. : 401, Bldg.14, No. 48-12, Fuchengao Rd., Pinghu Street, Longgang District, Shenzhen, Guangdong Manufacturer's Name ............. : Shenzhen Mgctech Co., Ltd. Address .................................. : 401, Bldg.14, No. 48-12, Fuchengao Rd., Pinghu Street, Longgang District, Shenzhen, Guangdong Product description Product name ........................... : 15W Fast Wireless Car Charger Trademark ............................. : N/A Model Name .......................... : AC-10 Serial Model ............................ AC-20, AC-30, AC-40, AC-50, AC-60, AC-70,AC-80, AC-90, AW-Z9729 Standards ............................... : FCC CFR 47 PART 1 , 1.1310 Test procedure ....................... : KDB 680106 D01 RF Exposure Wireless Charging Apps v03r01 Date of Test Date (s) of performance of tests ............ : May 11, 2021 ~ May 25, 2021 Test Result ............................................. : Pass This device described above has been tested by Shenzhen Microtest Co., Ltd. and the test results show that the equipment under test (EUT) is in compliance with the FCC requirements. And it is applicable only to the tested sample identified in the report. Testing Engineer : (Cindy Qin) Technical Manager : (Leo Su) Authorized Signatory : (Tom Xue) - Page 4 of 11 - Report No.: MTi210507015-04E2 Address: 101, No. 7, Zone 2, Xinxing Industrial Park, Fuhai Avenue, Xinhe Community, Fuhai Street, Bao’ an District, Shenzhen, Guangdong, China. Tel: (86-755)88850135 Fax: (86-755) 88850136 Web:www.mtitest.com E-mail: [email protected] Table of Contents 1 GENERAL INFORMATION .......................................................................................................................................... 5 1.1 DESCRIPTION OF EUT ................................................................................................................................................... 5 1.2 ANCILLARY EQUIPMENT LIST ........................................................................................................................................... 5 1.3 MEASUREMENT UNCERTAINTY ........................................................................................................................................ 5 2 TESTING SITE ............................................................................................................................................................ 6 3 LIST OF TEST EQUIPMENT ......................................................................................................................................... 7 4 TEST RESULTS ........................................................................................................................................................... 8 4.4 MAXIMUM PERMISSIBLE EXPOSURE.................................................................................................................................. 8 4.4.1 Limit .................................................................................................................................................................... 8 4.4.2 Test Procedures ................................................................................................................................................... 8 4.4.3 Test Setup............................................................................................................................................................ 9 4.4.4 Test Result ........................................................................................................................................................... 9 4.4.5 MPE Setup photo .............................................................................................................................................. 11 - Page 5 of 11 - Report No.: MTi210507015-04E2 Address: 101, No. 7, Zone 2, Xinxing Industrial Park, Fuhai Avenue, Xinhe Community, Fuhai Street, Bao’ an District, Shenzhen, Guangdong, China. Tel: (86-755)88850135 Fax: (86-755) 88850136 Web:www.mtitest.com E-mail: [email protected] 1 General Information 1.1 Description of EUT Product name: 15W Fast Wireless Car Charger Brand name: N/A Model name: AC-10 Series model: AC-20, AC-30, AC-40, AC-50, AC-60, AC-70,AC-80, AC-90, AW-Z9729 Defere…

Text truncated - open the document above for the full version.

Address: 101, No. 7, Zone 2, Xinxing Industrial Park, Fuhai Avenue, Xinhe Community, Fuhai Street, Bao’ an District, Shenzhen, Guangdong, China. Tel: (86-755)88850135 Fax: (86-755) 88850136 Web:www.mtitest.com E-mail: [email protected] Test Report Report No.: MTi210507015-04E1 Date of issue: May 25, 2021 Applicant: Shenzhen Mgctech Co., Ltd. Product name: 15W Fast Wireless Car Charger Model(s): AC-10, AC-20, AC-30, AC-40, AC-50, AC-60, AC-70,AC-80, AC-90, AW-Z9729 FCC ID: 2AVSB-AC-10 Shenzhen Microtest Co., Ltd. http://www.mtitest.com - Page 2 of 25 - Report No.: MTi210507015-04E1 Address: 101, No. 7, Zone 2, Xinxing Industrial Park, Fuhai Avenue, Xinhe Community, Fuhai Street, Bao’ an District, Shenzhen, Guangdong, China. Tel: (86-755)88850135 Fax: (86-755) 88850136 Web:www.mtitest.com E-mail: [email protected] Instructions 1. The report shall not be partially reproduced without the written consent of the laboratory; 2. The test results of this report are only responsible for the samples submitted; 3. This report is invalid without the seal and signature of the laboratory; 4. This report is invalid if transferred, altered or tampered with in any form without authorization; 5. Any objection to this report shall be submitted to the laboratory within 15 days from the date of receipt of the report. - Page 3 of 25 - Report No.: MTi210507015-04E1 Address: 101, No. 7, Zone 2, Xinxing Industrial Park, Fuhai Avenue, Xinhe Community, Fuhai Street, Bao’ an District, Shenzhen, Guangdong, China. Tel: (86-755)88850135 Fax: (86-755) 88850136 Web:www.mtitest.com E-mail: [email protected] Table of Contents 1 GENERAL INFORMATION ................................................................................................................................... 5 1.1 FEATURE OF EQUIPMENT UNDER TEST (EUT) ................................................................................................................... 5 1.2 TEST MODE .............................................................................................................................................................. 5 1.3 EUT TEST SETUP........................................................................................................................................................ 5 1.4 ANCILLARY EQUIPMENT .............................................................................................................................................. 5 2 SUMMARY OF TEST RESULT ............................................................................................................................... 7 2.1 OPERATION CHANNEL LIST ........................................................................................................................................... 7 2.2 TEST CHANNEL .......................................................................................................................................................... 7 3 TEST FACILITIES AND ACCREDITATIONS .............................................................................................................. 8 3.1 TEST LABORATORY ..................................................................................................................................................... 8 3.2 ENVIRONMENTAL CONDITIONS ..................................................................................................................................... 8 3.3 MEASUREMENT UNCERTAINTY ...................................................................................................................................... 8 4 LIST OF TEST EQUIPMENT .................................................................................................................................. 9 5 TEST RESULTS ....................................................................................................................................................10 5.1 ANTENNA REQUIREMENT .......................................................................................................................................... 10 5.1.1 Standard requirement ............................................................................................................................... 10 5.1.2 EUT Antenna ............................................................................................................................................. 10 5.2 CONDUCTED EMISSION ............................................................................................................................................. 11 5.2.1 Limits ......................................................................................................................................................... 11 5.2.2 Test Procedures ......................................................................................................................................... 11 5.2.3 Test Setup .................................................................................................................................................. 11 5.2.4 Test Result ................................................................................................................................................. 11 5.3 RADIATED EMISSION ................................................................................................................................................. 16 5.3.1 Limits ......................................................................................................................................................... 16 5.3.2 Test Procedures ......................................................................................................................................... 17 5.3.3 Test Setup .................................................................................................................................................. 18 5.3.4 Test Result ............................................................................…

Text truncated - open the document above for the full version.

Model: AC-10 Radiated emission Conducted emission