2AW68-NPE3039GBAX3000 Dual Band Wi-Fi GPON Terminal

NPE3039GB AX3000 Dual Band Wi-Fi GPON Terminal Quick Installation Guide 1. Package Content 2. Ports and indicators NPE3039GB x 1 Optic Cable x 1 Power Adapter x 1 Ethernet Cable x 1 Telephone Cable x 1 Quick Installation Guide x 1 3. Hardware connections 4. Wi-Fi connection 5. Configure on the web 7. LED Indicator Explanation 8. Button Explanation Connect a fiber optic cable to the PON po r t. Connect a computer to the GE port using the Ethernet cable (optional). Connect a telephone to the TEL port using the PHONE cable (optional). Using SSID Use the SSID and Wireless Key on the device label to connect wireless to the device. On your smartphone or notebook, find this SSID. Enter the Wireless Key to connect. Using WPS Press the WPS button on the device and the WPS indicator will blink. Then press the WPS button on the client. If the WPS method fails, use the SSID and wireless key to set up a WiFi connection. Configure the device on the web page according to the information on the device label. Open a web browser, enter the IP address, default User Name and Login Password, and then click Login. 6. Environment ItemsFeatures 0°C~40°C Operating Temperature NameStateDescription Power On Off The device has been turned on. The device has not been turned on. Internet PON LOS Explanation Hold down for more than 5 seconds and release to Name RESET restore the factory settings. When reset takes effect, all indicators are on for 1s and then off. Hold down the button more than 2 seconds and release it to use the WPS connect the device. Enable/disable wireless network. WPS WIFI On The device has been registered. On In Routing mode and WAN connection is up. OffNo optical signal is detected. OffOpcal signal is detected. BlinkingNo optical signal is detected. BlinkingAttempt to get an IP address. BlinkingOptical signal is detected. WIFI 2.4G/5G On Wi-Fi has been turned on. OffWi-Fi has been shut down. BlinkingWi-Fi data is being transmitted. TEL On The VOIP server has been registered. OffThe VOIP server is not registered. BlinkingThe voice service is in use. LAN1- LAN4 On The LAN port is properly connected. OffThe LAN port is not connected. BlinkingData are being transmitted. WPS On The device is successfully connected through WPS function. Off The WPS function is not enabled, or the device is successfully connected through WPS function. Blinking The device is being connected through WPS function. Off No internet connection or the modem router is operating in Bridge mode. 9. FCC Statement 10.Warnings This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures: — Reorient or relocate the receiving antenna. — ncrease the separation between the equipment and receiver. — Connect the equipment into an outlet on a circuit different rom thatto which the receiver is connected. — Consult the dealer or an experienced radio/TV technician for help. This device complies with FCC radiation exposure limits set forth for an uncontrolled environment. This equipment must be installed and operated in accordance with provided instructions and the antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20cm from all persons. FCC Radiation Exposure Statement This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. Any changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment. Caution! Caution-Use of controls or adjustments or performance of procedures other than those specified herein may result in hazardous radiation exposure. NPE3039GB AX3000 Terminal WiFi GPON de doble banda Guía de Instalación Rápida 1. Contenido del paquete 2. Puertos e indicadores NPE3039GB x 1 Cable óptica x 1 Adaptador corriente x 1 Cable Etherne x 1 Cable telefónico x 1 Guía de instalación rápida x 1 Botón WIFI Botón WPS 3. Conexiones de hardware 4. Conexión WiFi 5. Configurar en la web 7. Descripción de Indicadores LED 8. Botón Explicación Portátil GE TEL Conecte un cable de fib r a óptica al pue r to PON. Conecte un ordenador al puerto GE mediante el cable Ethernet (opcional). Conecte un teléfono al puerto TEL mediante el cable PHONE (opcional). Uso de SSID Utilice el SSID y la clave inalámbrica de la etiqueta del dispositivo para conectarse inalámbricamente a él. En su smartphone o portátil, busque este SSID. Introduzca la clave inalámbrica para conectarse. Uso de WPS Pulse el botón WPS del dispositivo y el indicador WPS parpadeará. A continuación, pulse el botón WPS en el cliente. Si el método WPS falla, utilice el SSID y la clave inalámbrica para establecer una conexión WiFi. Configure el dispositivo en la página web de acuerdo con la información de la etiqueta del dispositivo. Abra un navegador web, introduzca la dirección IP, el nombre de usuario predeterminado y la contraseña de inicio de sesión y, a continuación, haga clic en Iniciar sesión. 6. Medio ambiente Proyecto Características 0°C~40°C Temperatura de funcionamiento NombreEstadoDescripción Power Encendido Apagado El aparato se ha e…

Text truncated - open the document above for the full version.

Shenzhen Toby Technology Co., Ltd. Http://www.tobylab.cn Add：1/F.,Building 6, Rundongsheng Industrial Zone, Longzhu, Xixiang, Bao'an District, Shenzhen, Guangdong, China. Report No.: TBR-C-202509-0115-11 Page: 86 of 213 FCC ID: 2AW68-NPE3039GB TB-RF-074-1.0 11AX20-CDD-Ant1-5240 11AX20-CDD-Ant2-5240 11AX20-CDD-Ant3-5240 11AX20-CDD-Ant1-5260 11AX20-CDD-Ant2-5260 11AX20-CDD-Ant3-5260 Shenzhen Toby Technology Co., Ltd. Http://www.tobylab.cn Add：1/F.,Building 6, Rundongsheng Industrial Zone, Longzhu, Xixiang, Bao'an District, Shenzhen, Guangdong, China. Report No.: TBR-C-202509-0115-11 Page: 87 of 213 FCC ID: 2AW68-NPE3039GB TB-RF-074-1.0 11AX20-CDD-Ant1-5280 11AX20-CDD-Ant2-5280 11AX20-CDD-Ant3-5280 11AX20-CDD-Ant1-5320 11AX20-CDD-Ant2-5320 11AX20-CDD-Ant3-5320 Shenzhen Toby Technology Co., Ltd. Http://www.tobylab.cn Add：1/F.,Building 6, Rundongsheng Industrial Zone, Longzhu, Xixiang, Bao'an District, Shenzhen, Guangdong, China. Report No.: TBR-C-202509-0115-11 Page: 88 of 213 FCC ID: 2AW68-NPE3039GB TB-RF-074-1.0 11AX20-CDD-Ant1-5500 11AX20-CDD-Ant2-5500 11AX20-CDD-Ant3-5500 11AX20-CDD-Ant1-5580 11AX20-CDD-Ant2-5580 11AX20-CDD-Ant3-5580 Shenzhen Toby Technology Co., Ltd. Http://www.tobylab.cn Add：1/F.,Building 6, Rundongsheng Industrial Zone, Longzhu, Xixiang, Bao'an District, Shenzhen, Guangdong, China. Report No.: TBR-C-202509-0115-11 Page: 89 of 213 FCC ID: 2AW68-NPE3039GB TB-RF-074-1.0 11AX20-CDD-Ant1-5720 11AX20-CDD-Ant2-5720 11AX20-CDD-Ant3-5720 11AX20-CDD-Ant1-5745 11AX20-CDD-Ant2-5745 11AX20-CDD-Ant3-5745 Shenzhen Toby Technology Co., Ltd. Http://www.tobylab.cn Add：1/F.,Building 6, Rundongsheng Industrial Zone, Longzhu, Xixiang, Bao'an District, Shenzhen, Guangdong, China. Report No.: TBR-C-202509-0115-11 Page: 90 of 213 FCC ID: 2AW68-NPE3039GB TB-RF-074-1.0 11AX20-CDD-Ant1-5785 11AX20-CDD-Ant2-5785 11AX20-CDD-Ant3-5785 11AX20-CDD-Ant2-5825 11AX20-CDD-Ant1-5825 11AX20-CDD-Ant3-5825 Shenzhen Toby Technology Co., Ltd. Http://www.tobylab.cn Add：1/F.,Building 6, Rundongsheng Industrial Zone, Longzhu, Xixiang, Bao'an District, Shenzhen, Guangdong, China. Report No.: TBR-C-202509-0115-11 Page: 91 of 213 FCC ID: 2AW68-NPE3039GB TB-RF-074-1.0 11AX40-CDD-Ant1-5190 11AX40-CDD-Ant2-5190 11AX40-CDD-Ant3-5190 11AX40-CDD-Ant3-5230 11AX40-CDD-Ant1-5230 11AX40-CDD-Ant2-5230 Shenzhen Toby Technology Co., Ltd. Http://www.tobylab.cn Add：1/F.,Building 6, Rundongsheng Industrial Zone, Longzhu, Xixiang, Bao'an District, Shenzhen, Guangdong, China. Report No.: TBR-C-202509-0115-11 Page: 92 of 213 FCC ID: 2AW68-NPE3039GB TB-RF-074-1.0 11AX40-CDD-Ant1-5270 11AX40-CDD-Ant2-5270 11AX40-CDD-Ant3-5270 11AX40-CDD-Ant1-5310 11AX40-CDD-Ant2-5310 11AX40-CDD-Ant3-5310 Shenzhen Toby Technology Co., Ltd. Http://www.tobylab.cn Add：1/F.,Building 6, Rundongsheng Industrial Zone, Longzhu, Xixiang, Bao'an District, Shenzhen, Guangdong, China. Report No.: TBR-C-202509-0115-11 Page: 93 of 213 FCC ID: 2AW68-NPE3039GB TB-RF-074-1.0 11AX40-CDD-Ant1-5510 11AX40-CDD-Ant2-5510 11AX40-CDD-Ant3-5510 11AX40-CDD-Ant1-5550 11AX40-CDD-Ant2-5550 11AX40-CDD-Ant3-5550 Shenzhen Toby Technology Co., Ltd. Http://www.tobylab.cn Add：1/F.,Building 6, Rundongsheng Industrial Zone, Longzhu, Xixiang, Bao'an District, Shenzhen, Guangdong, China. Report No.: TBR-C-202509-0115-11 Page: 94 of 213 FCC ID: 2AW68-NPE3039GB TB-RF-074-1.0 11AX40-CDD-Ant1-5710 11AX40-CDD-Ant2-5710 11AX40-CDD-Ant3-5710 11AX40-CDD-Ant1-5755 11AX40-CDD-Ant2-5755 11AX40-CDD-Ant3-5755 Shenzhen Toby Technology Co., Ltd. Http://www.tobylab.cn Add：1/F.,Building 6, Rundongsheng Industrial Zone, Longzhu, Xixiang, Bao'an District, Shenzhen, Guangdong, China. Report No.: TBR-C-202509-0115-11 Page: 95 of 213 FCC ID: 2AW68-NPE3039GB TB-RF-074-1.0 11AX40-CDD-Ant1-5795 11AX40-CDD-Ant2-5795 11AX40-CDD-Ant3-5795 11AX80-CDD-Ant1-5210 11AX80-CDD-Ant2-5210 11AX80-CDD-Ant3-5210 Shenzhen Toby Technology Co., Ltd. Http://www.tobylab.cn Add：1/F.,Building 6, Rundongsheng Industrial Zone, Longzhu, Xixiang, Bao'an District, Shenzhen, Guangdong, China. Report No.: TBR-C-202509-0115-11 Page: 96 of 213 FCC ID: 2AW68-NPE3039GB TB-RF-074-1.0 11AX80-CDD-Ant1-5290 11AX80-CDD-Ant2-5290 11AX80-CDD-Ant3-5290 11AX80-CDD-Ant1-5530 11AX80-CDD-Ant2-5530 11AX80-CDD-Ant3-5530 Shenzhen Toby Technology Co., Ltd. Http://www.tobylab.cn Add：1/F.,Building 6, Rundongsheng Industrial Zone, Longzhu, Xixiang, Bao'an District, Shenzhen, Guangdong, China. Report No.: TBR-C-202509-0115-11 Page: 97 of 213 FCC ID: 2AW68-NPE3039GB TB-RF-074-1.0 11AX80-CDD-Ant1-5610 11AX80-CDD-Ant2-5610 11AX80-CDD-Ant3-5610 11AX80-CDD-Ant1-5690 11AX80-CDD-Ant2-5690 11AX80-CDD-Ant3-5690 Shenzhen Toby Technology Co., Ltd. Http://www.tobylab.cn Add：1/F.,Building 6, Rundongsheng Industrial Zone, Longzhu, Xixiang, Bao'an District, Shenzhen, Guangdong, China. Report No.: TBR-C-202509-0115-11 Page: 98 of 213 FCC ID: 2AW68-NPE3039GB TB-RF-074-1.0 11AX80-CDD-Ant3-5775 11AX80-CDD-Ant1-5775 11AX80-CDD-Ant2-5775 11AX160-CDD-Ant1-5250 11AX160-CDD-Ant2-5250 11AX160-CDD-Ant3-5250 Shenzhen Toby Technology Co., Ltd. Http://www.tobylab.cn Add：1/F.,Building 6, Rundongsheng Industrial Zone, Longzhu, Xixiang, Bao'an District, Shenzhen, Guangdong, China. Report No.: TBR-C-202509-0115-11 Page: 99 of 213 FCC ID: 2AW68-NPE3039GB TB-RF-074-1.0 11AX160-CDD-Ant1-5570 11AX160-CDD-Ant2-5570 11AX160-CDD-Ant3-5570 Shenzhen Toby Technology Co., Ltd. Http://www.tobylab.cn Add：1/F.,Building 6, Rundongsheng Industrial Zone, Longzhu, Xixiang, Bao'an District, Shenzhen, Guangdong, China. Report No.: TBR-C-202509-0115-11 Page: 100 of 213 FCC ID: 2AW68-NPE3039GB TB-RF-074-1.0 3: Min emission bandwidth 3.1 Test Result-B4 TestMode Antenna Frequency[MHz] 6dB EBW [MHz] FL[MHz] FH[MHz] Limit[MHz] Verdict 11A-CDD Ant1 5720 16.44 5711.76 5728.20 --- --- 11A-CDD Ant2 5720 16.36 5711.84 5728.20 --- --- 11A-CDD Ant3 5720 16.44 5711.80 5728.24 --- --- 11A-CDD Ant1 5720_UNII-2C 13.24 5711.76 5725 --- --- 11A-CDD Ant2 5720_UNII-2C 13.16 5711.84 5725 --- --- 11A-CDD Ant3 5720_UNII-2C 13.2 5711.80 5725 --…

Text truncated - open the document above for the full version.

FCC ID:2AW68-NPE3039GB TB-RF-074-1.0 Appendix V EUT Test Photographs Photo of Setup for Radiated Emission (Below 1 GHz) Photo of Setup for Radiated Emission (Above 1 GHz) FCC ID:2AW68-NPE3039GB TB-RF-074-1.0 Photo of Setup for Conducted Emission Photo of Setup for RF Conducted Measurements FCC ID:2AW68-NPE3039GB TB-RF-074-1.0 Photo of Setup for DFS Test -----END OF THE REPORT-----

Report No.: TBR-C-202509-0115-12 Page: 64 of 65 TB-RF-074-1.0 11A-5260-PASS 11A-5500-PASS 11N40-5270-PASS 11N40-5510-PASS 11AC80-5290-PASS 11AC80-5530-PASS Report No.: TBR-C-202509-0115-12 Page: 65 of 65 TB-RF-074-1.0 ----END OF THE REPORT------

Shenzhen Toby Technology Co., Ltd. Report No.: TBR-C-202509-0115-12 Page: 1 of 65 TB-RF-074-1.0 1/F.,Building 6, Rundongsheng Industrial Zone, Longzhu, Xixiang, Bao'an District, Shenzhen, Guangdong, China Tel: +86 75526509301 Fax: +86 75526509195 DFS Test Report FCC ID: 2AW68-NPE3039GB Report No. : TBR-C-202509-0115-12 Applicant : Shenzhen SDMC Technology Co.,Ltd. Equipment Under Test (EUT) EUT Name : AX3000 Dual Band Wi-Fi GPON Terminal Model No. : NPE3039GB Series Model No. : N/A Brand Name : N/A Sample ID : HC-C-202509-0115-01-01& HC-C-202509-0115-01-02 Receipt Date : 2025-10-20 Test Date : 2025-10-20 to 2025-11-17 Issue Date : 2025-11-17 Standards : 47 CFR FCC Part 15.407 Test Method : KDB 905462 D02 UNII DFS Compliance Procedures New Rules v02 Conclusions : PASS In the configuration tested, the EUT complied with the standards specified above. Test By : Rick Chen Reviewed By : Wade Lv Approved By : Ivan Su This report details the results of the testing carried out on one sample. The results contained in this test report do not relate to other samples of the same product. The manufacturer should ensure that all products in series production are in conformity with the product sample detailed in the report. Report No.: TBR-C-202509-0115-12 Page: 2 of 65 TB-RF-074-1.0 Contents CONTENTS ............................................................................................................................................. 2 1. GENERAL INFORMATION ABOUT EUT.............................................................................. 4 1.1. Client Information ........................................................................................................... 4 1.2. General Description of EUT (Equipment Under Test) ............................................. 4 1.3. Test Facility ..................................................................................................................... 6 2. TEST SOFTWARE ..................................................................................................................... 7 3. SUPPORT EQUIPMENT ........................................................................................................... 7 4. TEST EQUIPMENT .................................................................................................................... 7 5. U-NII DFS RULE REQUIREMENTS ....................................................................................... 8 5.1. Applicability of DFS requirements ............................................................................... 8 5.2. Test Limits and Radar Signal Parameters ................................................................. 9 6. CALIBRATION OF RADAR WAVEFORM .......................................................................... 14 6.1. Test Procedure ............................................................................................................. 14 6.2. Conducted Calibration Test Setup ............................................................................ 15 6.3. Deviation from Test Standard .................................................................................... 15 6.4. Radar Waveform Calibration Result ......................................................................... 15 7. U-NII DFS TESTING ................................................................................................................ 16 7.1. Test Procedure ............................................................................................................. 16 7.2. Test Setup ..................................................................................................................... 16 7.3. Channel Loading .......................................................................................................... 17 8. TESTING RESULTS ................................................................................................................ 18 8.1. Summary of Test Results ........................................................................................... 18 8.2. DFS Detection Threshold ........................................................................................... 18 8.3. Radar Waveform Calibration ...................................................................................... 19 8.4. In-Service(Pd) ............................................................................................................... 45 8.5. Channel Availability Check Time ............................................................................... 54 8.6. Channel Move Time and Channel Closing Transmission Time ........................... 58 8.7. Non-occupancy Period ................................................................................................ 59 8.8. U-NII Detection Bandwidth ......................................................................................... 60 Report No.: TBR-C-202509-0115-12 Page: 3 of 65 TB-RF-074-1.0 Revision History Report No. Version Description Issued Date TBR-C-202509-0115-12 Rev.01 Initial issue of report 2025-11-17 Report No.: TBR-C-202509-0115-12 Page: 4 of 65 TB-RF-074-1.0 1. General Information about EUT 1.1. Client Information Applicant : Shenzhen SDMC Technology Co.,Ltd. Address : Floor 1, Building 5, Hengtongfa Industrial Zone, Tangtou Industrial Park, Tangtou Community, Shiyan Street, Baoan District, Shenzhen, China Manufacturer : Shenzhen SDMC Technology Co.,Ltd. Address : Floor 1, Building 5, Hengtongfa Industrial Zone, Tangtou Industrial Park, Tangtou Community, Shiyan Street, Baoan District, Shenzhen, China 1.2. General Description of EUT (Equipment Under Test) EUT Name : AX3000 Dual Band Wi-Fi GPON Terminal HVIN/Models No. : NPE3039GB Model Difference : N/A Operating Frequency Band : 5250-5320MHz 5500-5720MHz TPC : No Yes Power Rating : AC Adapter (Model: GQ18-120150-CU): Input: 100-240V~, 50/60Hz, 0.5A Max. Output: 12V⎓1.5A Software Version : N/A Hardware Versio…

Text truncated - open the document above for the full version.

Report No.: TBR-C-202509-0115-11 Page: 168 of 186 TB-RF-074-1.0 Temperature: 23.7°C Relative Humidity: 49% Test Voltage: AC 120V/60Hz Ant. Pol. Vertical Test Mode: TX 802.11ax(HE20) Mode 5745 MHz (U-NII-3) -CDD Remark: Remark: 1. Corr. = Antenna Factor (dB/m) + Cable Loss (dB) 2. Peak/AVG (dBμV/m)= Corr. (dB/m)+ Read Level (dBμV) 3. Margin (dB) = Peak/AVG (dBμV/m)-Limit PK/AVG(dBμV/m) Report No.: TBR-C-202509-0115-11 Page: 169 of 186 TB-RF-074-1.0 Temperature: 23.7°C Relative Humidity: 49% Test Voltage: AC 120V/60Hz Ant. Pol. Horizontal Test Mode: TX 802.11ax(HE20) Mode 5825 MHz (U-NII-3) -CDD Remark: Remark: 1. Corr. = Antenna Factor (dB/m) + Cable Loss (dB) 2. Peak/AVG (dBμV/m)= Corr. (dB/m)+ Read Level (dBμV) 3. Margin (dB) = Peak/AVG (dBμV/m)-Limit PK/AVG(dBμV/m) Report No.: TBR-C-202509-0115-11 Page: 170 of 186 TB-RF-074-1.0 Temperature: 23.7°C Relative Humidity: 49% Test Voltage: AC 120V/60Hz Ant. Pol. Vertical Test Mode: TX 802.11ax(HE20) Mode 5825 MHz (U-NII-3) -CDD Remark: Remark: 1. Corr. = Antenna Factor (dB/m) + Cable Loss (dB) 2. Peak/AVG (dBμV/m)= Corr. (dB/m)+ Read Level (dBμV) 3. Margin (dB) = Peak/AVG (dBμV/m)-Limit PK/AVG(dBμV/m) Report No.: TBR-C-202509-0115-11 Page: 171 of 186 TB-RF-074-1.0 Temperature: 23.7°C Relative Humidity: 49% Test Voltage: AC 120V/60Hz Ant. Pol. Horizontal Test Mode: TX 802.11n(HT40) Mode 5755 MHz (U-NII-3) -CDD Remark: Remark: 1. Corr. = Antenna Factor (dB/m) + Cable Loss (dB) 2. Peak/AVG (dBμV/m)= Corr. (dB/m)+ Read Level (dBμV) 3. Margin (dB) = Peak/AVG (dBμV/m)-Limit PK/AVG(dBμV/m) Report No.: TBR-C-202509-0115-11 Page: 172 of 186 TB-RF-074-1.0 Temperature: 23.7°C Relative Humidity: 49% Test Voltage: AC 120V/60Hz Ant. Pol. Vertical Test Mode: TX 802.11n(HT40) Mode 5755 MHz (U-NII-3) -CDD Remark: Remark: 1. Corr. = Antenna Factor (dB/m) + Cable Loss (dB) 2. Peak/AVG (dBμV/m)= Corr. (dB/m)+ Read Level (dBμV) 3. Margin (dB) = Peak/AVG (dBμV/m)-Limit PK/AVG(dBμV/m) Report No.: TBR-C-202509-0115-11 Page: 173 of 186 TB-RF-074-1.0 Temperature: 23.7°C Relative Humidity: 49% Test Voltage: AC 120V/60Hz Ant. Pol. Horizontal Test Mode: TX 802.11n(HT40) Mode 5795 MHz (U-NII-3) -CDD Remark: Remark: 1. Corr. = Antenna Factor (dB/m) + Cable Loss (dB) 2. Peak/AVG (dBμV/m)= Corr. (dB/m)+ Read Level (dBμV) 3. Margin (dB) = Peak/AVG (dBμV/m)-Limit PK/AVG(dBμV/m) Report No.: TBR-C-202509-0115-11 Page: 174 of 186 TB-RF-074-1.0 Temperature: 23.7°C Relative Humidity: 49% Test Voltage: AC 120V/60Hz Ant. Pol. Vertical Test Mode: TX 802.11n(HT40) Mode 5795 MHz (U-NII-3) -CDD Remark: Remark: 1. Corr. = Antenna Factor (dB/m) + Cable Loss (dB) 2. Peak/AVG (dBμV/m)= Corr. (dB/m)+ Read Level (dBμV) 3. Margin (dB) = Peak/AVG (dBμV/m)-Limit PK/AVG(dBμV/m) Report No.: TBR-C-202509-0115-11 Page: 175 of 186 TB-RF-074-1.0 Temperature: 23.7°C Relative Humidity: 49% Test Voltage: AC 120V/60Hz Ant. Pol. Horizontal Test Mode: TX 802.11ac(VHT40) Mode 5755 MHz (U-NII-3) -CDD Remark: Remark: 1. Corr. = Antenna Factor (dB/m) + Cable Loss (dB) 2. Peak/AVG (dBμV/m)= Corr. (dB/m)+ Read Level (dBμV) 3. Margin (dB) = Peak/AVG (dBμV/m)-Limit PK/AVG(dBμV/m) Report No.: TBR-C-202509-0115-11 Page: 176 of 186 TB-RF-074-1.0 Temperature: 23.7°C Relative Humidity: 49% Test Voltage: AC 120V/60Hz Ant. Pol. Vertical Test Mode: TX 802.11ac(VHT40) Mode 5755 MHz (U-NII-3) -CDD Remark: Remark: 1. Corr. = Antenna Factor (dB/m) + Cable Loss (dB) 2. Peak/AVG (dBμV/m)= Corr. (dB/m)+ Read Level (dBμV) 3. Margin (dB) = Peak/AVG (dBμV/m)-Limit PK/AVG(dBμV/m) Report No.: TBR-C-202509-0115-11 Page: 177 of 186 TB-RF-074-1.0 Temperature: 23.7°C Relative Humidity: 49% Test Voltage: AC 120V/60Hz Ant. Pol. Horizontal Test Mode: TX 802.11ac(VHT40) Mode 5795 MHz (U-NII-3) -CDD Remark: Remark: 1. Corr. = Antenna Factor (dB/m) + Cable Loss (dB) 2. Peak/AVG (dBμV/m)= Corr. (dB/m)+ Read Level (dBμV) 3. Margin (dB) = Peak/AVG (dBμV/m)-Limit PK/AVG(dBμV/m) Report No.: TBR-C-202509-0115-11 Page: 178 of 186 TB-RF-074-1.0 Temperature: 23.7°C Relative Humidity: 49% Test Voltage: AC 120V/60Hz Ant. Pol. Vertical Test Mode: TX 802.11ac(VHT40) Mode 5795 MHz (U-NII-3) -CDD Remark: Remark: 1. Corr. = Antenna Factor (dB/m) + Cable Loss (dB) 2. Peak/AVG (dBμV/m)= Corr. (dB/m)+ Read Level (dBμV) 3. Margin (dB) = Peak/AVG (dBμV/m)-Limit PK/AVG(dBμV/m) Report No.: TBR-C-202509-0115-11 Page: 179 of 186 TB-RF-074-1.0 Temperature: 23.7°C Relative Humidity: 49% Test Voltage: AC 120V/60Hz Ant. Pol. Horizontal Test Mode: TX 802.11ax(HE40) Mode 5755 MHz (U-NII-3) -CDD Remark: Remark: 1. Corr. = Antenna Factor (dB/m) + Cable Loss (dB) 2. Peak/AVG (dBμV/m)= Corr. (dB/m)+ Read Level (dBμV) 3. Margin (dB) = Peak/AVG (dBμV/m)-Limit PK/AVG(dBμV/m) Report No.: TBR-C-202509-0115-11 Page: 180 of 186 TB-RF-074-1.0 Temperature: 23.7°C Relative Humidity: 49% Test Voltage: AC 120V/60Hz Ant. Pol. Vertical Test Mode: TX 802.11ax(HE40) Mode 5755 MHz (U-NII-3) -CDD Remark: Remark: 1. Corr. = Antenna Factor (dB/m) + Cable Loss (dB) 2. Peak/AVG (dBμV/m)= Corr. (dB/m)+ Read Level (dBμV) 3. Margin (dB) = Peak/AVG (dBμV/m)-Limit PK/AVG(dBμV/m) Report No.: TBR-C-202509-0115-11 Page: 181 of 186 TB-RF-074-1.0 Temperature: 23.7°C Relative Humidity: 49% Test Voltage: AC 120V/60Hz Ant. Pol. Horizontal Test Mode: TX 802.11ax(HE40) Mode 5795 MHz (U-NII-3) -CDD Remark: Remark: 1. Corr. = Antenna Factor (dB/m) + Cable Loss (dB) 2. Peak/AVG (dBμV/m)= Corr. (dB/m)+ Read Level (dBμV) 3. Margin (dB) = Peak/AVG (dBμV/m)-Limit PK/AVG(dBμV/m) Report No.: TBR-C-202509-0115-11 Page: 182 of 186 TB-RF-074-1.0 Temperature: 23.7°C Relative Humidity: 49% Test Voltage: AC 120V/60Hz Ant. Pol. Vertical Test Mode: TX 802.11ax(HE40) Mode 5795 MHz (U-NII-3) -CDD Remark: Remark: 1. Corr. = Antenna Factor (dB/m) + Cable Loss (dB) 2. Peak/AVG (dBμV/m)= Corr. (dB/m)+ Read Level (dBμV) 3. Margin (dB) = Peak/AVG (dBμV/m)-Limit PK/AVG(dBμV/m) Report No.: TBR-C-202509-0115-11 Page: 183 of 186 TB-RF-074-1.0 Temperature: 23.7°C Relative Humidity: 49% Test Voltage: AC 120V/60Hz Ant. Pol. Horizontal Test Mode: …

Text truncated - open the document above for the full version.

Report No.: TBR-C-202509-0115-11 Page: 94 of 186 TB-RF-074-1.0 Temperature: 23.7°C Relative Humidity: 49% Test Voltage: AC 120V/60Hz Ant. Pol. Vertical Test Mode: TX 802.11a Mode 5180 MHz (U-NII-1)–CDD Remark: Remark: 1. Corr. = Antenna Factor (dB/m) + Cable Loss (dB) 2. Peak/AVG (dBμV/m)= Corr. (dB/m)+ Read Level (dBμV) 3. Margin (dB) = Peak/AVG (dBμV/m)-Limit PK/AVG(dBμV/m) Report No.: TBR-C-202509-0115-11 Page: 95 of 186 TB-RF-074-1.0 Temperature: 23.7°C Relative Humidity: 49% Test Voltage: AC 120V/60Hz Ant. Pol. Horizontal Test Mode: TX 802.11a Mode 5320 MHz (U-NII-2A)–CDD Remark: Remark: 1. Corr. = Antenna Factor (dB/m) + Cable Loss (dB) 2. Peak/AVG (dBμV/m)= Corr. (dB/m)+ Read Level (dBμV) 3. Margin (dB) = Peak/AVG (dBμV/m)-Limit PK/AVG(dBμV/m) Report No.: TBR-C-202509-0115-11 Page: 96 of 186 TB-RF-074-1.0 Temperature: 23.7°C Relative Humidity: 49% Test Voltage: AC 120V/60Hz Ant. Pol. Vertical Test Mode: TX 802.11a Mode 5320 MHz (U-NII-2A)–CDD Remark: Remark: 1. Corr. = Antenna Factor (dB/m) + Cable Loss (dB) 2. Peak/AVG (dBμV/m)= Corr. (dB/m)+ Read Level (dBμV) 3. Margin (dB) = Peak/AVG (dBμV/m)-Limit PK/AVG(dBμV/m) Report No.: TBR-C-202509-0115-11 Page: 97 of 186 TB-RF-074-1.0 Temperature: 23.7°C Relative Humidity: 49% Test Voltage: AC 120V/60Hz Ant. Pol. Horizontal Test Mode: TX 802.11n(HT20) Mode 5180 MHz (U-NII-1)-CDD Remark: Remark: 1. Corr. = Antenna Factor (dB/m) + Cable Loss (dB) 2. Peak/AVG (dBμV/m)= Corr. (dB/m)+ Read Level (dBμV) 3. Margin (dB) = Peak/AVG (dBμV/m)-Limit PK/AVG(dBμV/m) Report No.: TBR-C-202509-0115-11 Page: 98 of 186 TB-RF-074-1.0 Temperature: 23.7°C Relative Humidity: 49% Test Voltage: AC 120V/60Hz Ant. Pol. Vertical Test Mode: TX 802.11n(HT20) Mode 5180 MHz (U-NII-1) -CDD Remark: Remark: 1. Corr. = Antenna Factor (dB/m) + Cable Loss (dB) 2. Peak/AVG (dBμV/m)= Corr. (dB/m)+ Read Level (dBμV) 3. Margin (dB) = Peak/AVG (dBμV/m)-Limit PK/AVG(dBμV/m) Report No.: TBR-C-202509-0115-11 Page: 99 of 186 TB-RF-074-1.0 Temperature: 23.7°C Relative Humidity: 49% Test Voltage: AC 120V/60Hz Ant. Pol. Horizontal Test Mode: TX 802.11n(HT20) Mode 5320MHz (U-NII-2A) -CDD Remark: Remark: 1. Corr. = Antenna Factor (dB/m) + Cable Loss (dB) 2. Peak/AVG (dBμV/m)= Corr. (dB/m)+ Read Level (dBμV) 3. Margin (dB) = Peak/AVG (dBμV/m)-Limit PK/AVG(dBμV/m) Report No.: TBR-C-202509-0115-11 Page: 100 of 186 TB-RF-074-1.0 Temperature: 23.7°C Relative Humidity: 49% Test Voltage: AC 120V/60Hz Ant. Pol. Vertical Test Mode: TX 802.11n(HT20) Mode 5320 MHz (U-NII-2A) -CDD Remark: Remark: 1. Corr. = Antenna Factor (dB/m) + Cable Loss (dB) 2. Peak/AVG (dBμV/m)= Corr. (dB/m)+ Read Level (dBμV) 3. Margin (dB) = Peak/AVG (dBμV/m)-Limit PK/AVG(dBμV/m) Report No.: TBR-C-202509-0115-11 Page: 101 of 186 TB-RF-074-1.0 Temperature: 23.7°C Relative Humidity: 49% Test Voltage: AC 120V/60Hz Ant. Pol. Horizontal Test Mode: TX 802.11ac(VHT20) Mode 5180 MHz (U-NII-1) -CDD Remark: Remark: 1. Corr. = Antenna Factor (dB/m) + Cable Loss (dB) 2. Peak/AVG (dBμV/m)= Corr. (dB/m)+ Read Level (dBμV) 3. Margin (dB) = Peak/AVG (dBμV/m)-Limit PK/AVG(dBμV/m) Report No.: TBR-C-202509-0115-11 Page: 102 of 186 TB-RF-074-1.0 Temperature: 23.7°C Relative Humidity: 49% Test Voltage: AC 120V/60Hz Ant. Pol. Vertical Test Mode: TX 802.11ac(VHT20) Mode 5180 MHz (U-NII-1) -CDD Remark: Remark: 1. Corr. = Antenna Factor (dB/m) + Cable Loss (dB) 2. Peak/AVG (dBμV/m)= Corr. (dB/m)+ Read Level (dBμV) 3. Margin (dB) = Peak/AVG (dBμV/m)-Limit PK/AVG(dBμV/m) Report No.: TBR-C-202509-0115-11 Page: 103 of 186 TB-RF-074-1.0 Temperature: 23.7°C Relative Humidity: 49% Test Voltage: AC 120V/60Hz Ant. Pol. Horizontal Test Mode: TX 802.11ac(VHT20) Mode 5320 MHz (U-NII-2A) -CDD Remark: Remark: 1. Corr. = Antenna Factor (dB/m) + Cable Loss (dB) 2. Peak/AVG (dBμV/m)= Corr. (dB/m)+ Read Level (dBμV) 3. Margin (dB) = Peak/AVG (dBμV/m)-Limit PK/AVG(dBμV/m) Report No.: TBR-C-202509-0115-11 Page: 104 of 186 TB-RF-074-1.0 Temperature: 23.7°C Relative Humidity: 49% Test Voltage: AC 120V/60Hz Ant. Pol. Vertical Test Mode: TX 802.11ac(VHT20) Mode 5320 MHz (U-NII-2A) -CDD Remark: Remark: 1. Corr. = Antenna Factor (dB/m) + Cable Loss (dB) 2. Peak/AVG (dBμV/m)= Corr. (dB/m)+ Read Level (dBμV) 3. Margin (dB) = Peak/AVG (dBμV/m)-Limit PK/AVG(dBμV/m) Report No.: TBR-C-202509-0115-11 Page: 105 of 186 TB-RF-074-1.0 Temperature: 23.7°C Relative Humidity: 49% Test Voltage: AC 120V/60Hz Ant. Pol. Horizontal Test Mode: TX 802.11ax(HE20) Mode 5180 MHz (U-NII-1) -CDD Remark: Remark: 1. Corr. = Antenna Factor (dB/m) + Cable Loss (dB) 2. Peak/AVG (dBμV/m)= Corr. (dB/m)+ Read Level (dBμV) 3. Margin (dB) = Peak/AVG (dBμV/m)-Limit PK/AVG(dBμV/m) Report No.: TBR-C-202509-0115-11 Page: 106 of 186 TB-RF-074-1.0 Temperature: 23.7°C Relative Humidity: 49% Test Voltage: AC 120V/60Hz Ant. Pol. Vertical Test Mode: TX 802.11ax(HE20) Mode 5180 MHz (U-NII-1) -CDD Remark: Remark: 1. Corr. = Antenna Factor (dB/m) + Cable Loss (dB) 2. Peak/AVG (dBμV/m)= Corr. (dB/m)+ Read Level (dBμV) 3. Margin (dB) = Peak/AVG (dBμV/m)-Limit PK/AVG(dBμV/m) Report No.: TBR-C-202509-0115-11 Page: 107 of 186 TB-RF-074-1.0 Temperature: 23.7°C Relative Humidity: 49% Test Voltage: AC 120V/60Hz Ant. Pol. Horizontal Test Mode: TX 802.11ax(HE20) Mode 5320 MHz (U-NII-2A) -CDD Remark: Remark: 1. Corr. = Antenna Factor (dB/m) + Cable Loss (dB) 2. Peak/AVG (dBμV/m)= Corr. (dB/m)+ Read Level (dBμV) 3. Marg…

Text truncated - open the document above for the full version.