2AWAS-910-00021Remote Unit

N2 NANO POWER Octa Band Digital Radios Integrated Antennas Integrated Bluetooth User Manual NANO POWER Digital Radio Commercial in Confidence © Copyright 2020, Mavenir 2 | P a g e Copyright © Mavenir 2020. All rights reserved. This document is protected by international copyright law and may not be reprinted, reproduced, copied or utilized in whole or in part by any means including electronic, mechanical, or other means without the prior written consent of Mavenir. Whilst reasonable care has been taken by Mavenir to ensure the information contained herein is reasonably accurate, Mavenir shall not, under any circumstances be liable for any loss or damage (direct or consequential) suffered by any party because of the contents of this publication or the reliance of any party thereon or any inaccuracy or omission therein. The information in this document is therefore provided on an “as is” basis without warranty and is subject to change without further notice and cannot be construed as a commitment by Mavenir. The products mentioned in this document are identified by the names, trademarks, service marks and logos of their respective companies or organizations and may not be used in any advertising or publicity or in any other way whatsoever without the prior written consent of those companies or organizations and Mavenir. NANO POWER Digital Radio Commercial in Confidence © Copyright 2020, Mavenir 3 | P a g e Content General ....................................................................................................................................................................................................... 5 Warnings ............................................................................................................................................................................................ 5 Site Considerations ............................................................................................................................................................................ 6 Environmental .................................................................................................................................................................................... 6 Preparation ................................................................................................................................................................................................. 7 Unpacking and Inspection .................................................................................................................................................................. 7 Tools .................................................................................................................................................................................................. 7 Clearance ........................................................................................................................................................................................... 7 Installation of the A2 ................................................................................................................................................................................. 9 Mount the A2 in the Rack .................................................................................................................................................................. 9 A2 Accessories ........................................................................................................................................................................... 9 Attach A2 Handle..................................................................................................................................................................... 10 Attach Sliding Rails and A2 to Rack ....................................................................................................................................... 10 Connect Power and Ground Cable to A2 ................................................................................................................................. 11 Mount the A2 on the Wall................................................................................................................................................................ 12 Attach Handle to A2 ................................................................................................................................................................ 12 Mount A2 to Wall .................................................................................................................................................................... 13 Connect Power and Ground Cable to A2 ................................................................................................................................. 14 Installation of the N2RU .......................................................................................................................................................................... 15 N2RU Ceiling Installation (with the suspended ceiling).................................................................................................................. 15 N2RU Accessories ................................................................................................................................................................... 15 Assemble Bracket I&II ............................................................................................................................................................ 16 Place the Bracket ...................................................................................................................................................................... 16 Assemble Bracket II ................................................................................................................................................................. 17 Buckle Up an…

Text truncated - open the document above for the full version.

1700 International Parkway, Richardson, TX 75081 USA T: +1 469 916 4393 E: [email protected] mavenir.com Mavenir Systems, Inc. Date: November 16, 2020 TO: Federal Communication Commission Equipment Authorization Branch 7435 Oakland Mills Road Columbia, MID 21046 Regarding: 2AWAS-910-00021 To whom it may concern: We, the undersigned, hereby authorize SGS-CSTC Standards Technical Services Co., Ltd. (SGS) Shenzhen Branch and Keny Xu in SGS-CSTC Standards Technical Services Co., Ltd. (SGS) Shenzhen Branch to act on our behalf in all manners relating to application for equipment authorization with respect to the FCC ID above, including signing of all documents relating to these matters. Any and all acts carried out by the agent on our behalf shall have the same effect as acts of our own. We, the undersigned, hereby certify that we are not subject to a denial of federal benefits, that includes FCC benefits, pursuant to Section 5301 of the Anti-Drug Abuse Act of 1988, 21 U.S.C. 853(a). Where our agent signs the application for certification on our behalf, I acknowledge that all responsibility for complying with the terms and conditions for Certification, as specified by SGS North America, Inc., still resides with Mavenir Systems, Inc. This authorization is valid until further written notice from the applicant. Print Name: Tuyen Banh Title: Principal Engineer Signature: On behalf of Company: Mavenir Systems, Inc. Telephone: 1-214-850-1327 E-mail: [email protected]

1700 International Parkway, Richardson, TX 75081 USA T: +1 469 916 4393 E: [email protected] mavenir.com Mavenir Systems, Inc. TO: Federal Communication Commission Equipment Authorization Branch 7435 Oakland Mills Road Columbia, MID 21046 Regarding: Confidentiality Request regarding application for FCC ID: 2AWAS-910-00021 LONG TERM CONFIDENTIALITY Pursuant to 47 CFR Section 0.459 and 0.457 of the commission’s rules, the applicant hereby request confidential treatment of the documents listed below, associated with the certification application referenced above. Schematic(s) Block Diagrams Operational Descriptions BOM List Tune-up procedure The documents above contain proprietary information not released to the public. Public disclosure of this information may prove harmful to the business of the applicant. Sincerely, Print Name: Tuyen Banh Title: Principal Engineer Signature: On behalf of Company: Mavenir Systems, Inc. Telephone: 1-214-850-1327 E-mail: [email protected]

Applicant Declaration Applicant Declaration Rev:0.0 SGS North America Inc. 620 Old Peachtree Road SUITE 100 Suwanee, Georgia 30024 United States Applicant Legal Business Name Mavenir Systems, Inc. Address 1700 International Parkway, Richardson, Texas 75081 USA Grantee Code 2AWAS FCC ID 2AWAS-910-00021 Authorized Contact Name Tuyen Banh Contact Email [email protected] Contact Phone 1-214-850-1327 I, the undersigned, certify that I am an authorized signatory for the Applicant and therefore declare; a) in accordance with 47CFR2.911(d), all of the statements herein and the exhibits attached hereto are true and correct to the best of my knowledge and belief. b) in accepting a Grant of Equipment Authorization issued by a TCB, under the authority of the FCC, as a result of the representations made in this application, the Applicant is responsible for: (1) labeling the equipment with the exact FCC ID as specified in this application, (2) compliance statement labeling pursuant to the applicable rules, (3) compliance of the equipment with the applicable technical rules, c) if the Applicant is not the actual manufacturer of the equipment, appropriate arrangements have been made with the manufacturer to ensure that production units of this equipment will continue to comply with the FCC’s technical requirements. d) in accordance with 47 CFR 2.909 and KDB394321, the Applicant has read, understood and agrees to accept that they are the responsible party and agree to abide by their responsibilities as specified under 47 CFR 2.909 and KDB394321. e) in accordance with ISO17065, FCC KDB641163, FCC KDB610077, KDB394321 and RSP-100, the Applicant has read, understood, accepts and agrees to abide by the post market surveillance requirements. (1) the Applicant understands, accepts and agrees that a sample may be requested for surveillance testing. (2) the Applicant shall make provisions to always have a production sample available upon request by SGS, FCC and/or ISED. (3) the Applicant shall, upon request by SGS, at the Applicant’s expense, provide a production sample of the requested product to SGS, FCC and/or ISED as instructed. The sample shall include all support devices, cables, software, accessories or other hardware or software required for evaluation, review, certification and audit surveillance of products certified by SGS. f) neither the Applicant nor any party to the application is subject to a denial of Federal benefits, that includes FCC benefits, pursuant to Section 5301 of the Anti-Drug Abuse Act of 1988, 21 U.S.C. §862 because of a conviction for possession or distribution of a controlled substance. See 47CFR 1.2002(b) for the definition of a “party” for these purposes. g) the Applicant has read, understood, accepts and agrees to abide by the SGS North America, Inc.(TCB) terms and conditions. Link to CFRs: https://www.fcc.gov/wireless/bureau-divisions/technologies-systems-and-innovation-division/rules-regulations-title-47 Link to KDBs: https://apps.fcc.gov/oetcf/kdb/index.cfm Link to RSP-100: https://www.ic.gc.ca/eic/site/smt-gst.nsf/eng/sf01130.html Applicant Signature: Date: November 16, 2020 Print Name: Tuyen Banh Title: Principal Engineer *NOTE: This declaration cannot be signed by an Agent, it shall be signed by an authorized person listed in the FCC database

SGS-CSTC Standards Technical Services Co., Ltd. Shenzhen Branch Page: 1 of 4 External Photos for SZEM2010010202CR FCC ID: 2AWAS-910-00021 SGS-CSTC Standards Technical Services Co., Ltd. Shenzhen Branch Page: 2 of 4 1 EUT Constructional Details SGS-CSTC Standards Technical Services Co., Ltd. Shenzhen Branch Page: 3 of 4 SGS-CSTC Standards Technical Services Co., Ltd. Shenzhen Branch Page: 4 of 4

Serial: DRRU-R3042D024 XXXXXXXXXX MFG Date: DD-MM-YYYY XXXXXXXXXXXXXX FCC ID ：2AWAS-910-00021 Contains FCC ID: NDD9578111008 S78-I482E     WARNING! This is NOT a CONSUMER device. It is designed for installation by FCC LICENSEES and QUALIFIED INSTALLERS. You MUST have an FCC LICENSE or express consent of an FCC License to operate this device. Unauthorized use may result in significant forfeiture penalties, including penalties in excess of $100,000 for each continuing violation. Remote Unit N2RU-I-8-DC Model: DRRU-R304024 Assembly Code: DRRU-R3042D024 Manufacturer: Mavenir Systems, Inc. Address: 1700 International Parkway Richardson, Texas 75081 USA Made in China Input: 48V 2.1A This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. 

SGS-CSTC Standards Technical Services Co., Ltd. Shenzhen Branch Page: 1 of 4 Internal Photos for SZEM2010010202CR FCC ID: 2AWAS-910-00021 SGS-CSTC Standards Technical Services Co., Ltd. Shenzhen Branch Page: 2 of 4 1 EUT Constructional Details SGS-CSTC Standards Technical Services Co., Ltd. Shenzhen Branch Page: 3 of 4 Antenna SGS-CSTC Standards Technical Services Co., Ltd. Shenzhen Branch Page: 4 of 4

SGS-CSTC Standards Technical Services Co., Ltd. Shenzhen Branch Report No.: SZEM201001020202 Page: 1 of 8 Keny Xu EMC Laboratory Manager 1 Cover page RF Exposure Evaluation Report Application No.: SZEM2010010202CR Applicant: Mavenir Systems, Inc. Address of Applicant: 1700 International Parkway, Ste 200, Richardson, Texas 75081 USA Manufacturer: Mavenir Systems, Inc. Address of Manufacturer: 1700 International Parkway, Ste 200, Richardson, Texas 75081 USA Factory: Sunwave Communications Co., Ltd. Address of Factory: 581 Huoju Avenue, Binjiang District, Hangzhou, P.R.China Zip: 310053 Product Name: Remote Unit Product Description: The RU conducts digital-analog conversion and power amplification of the input signals. Model No.(EUT): DRRU-R304024 FCC ID: 2AWAS-910-00021 Standards: 47 CFR Part 1.1307 47 CFR Part 1.1310 Date of Receipt: 2020-09-21 Date of Test: 2020-09-21 to 2020-11-21 Date of Issue: 2020-11-22 Test Result : PASS* * In the configuration tested, the EUT complied with the standards specified above. SGS-CSTC Standards Technical Services Co., Ltd. Shenzhen Branch Report No.: SZEM201001020202 Page: 2 of 8 2 Version Revision Record Version Chapter Date Modifier Remark 01 2020-11-22 Original Authorized for issue by: Edison Li /Project Engineer Eric Fu /Reviewer SGS-CSTC Standards Technical Services Co., Ltd. Shenzhen Branch Report No.: SZEM201001020202 Page: 3 of 8 3 Contents Page 1 COVER PAGE ........................................................................................................................................ 1 2 VERSION ................................................................................................................................................ 2 3 CONTENTS ............................................................................................................................................ 3 4 GENERAL INFORMATION ..................................................................................................................... 4 4.1 GENERAL DESCRIPTION OF EUT ............................................................................................................. 4 4.2 TEST LOCATION .................................................................................................................................... 5 4.3 TEST FACILITY ...................................................................................................................................... 5 4.4 DEVIATION FROM STANDARDS ................................................................................................................. 5 4.5 ABNORMALITIES FROM STANDARD CONDITIONS ........................................................................................ 5 4.6 OTHER INFORMATION REQUESTED BY THE CUSTOMER .............................................................................. 5 5 RF EXPOSURE EVALUATION ............................................................................................................... 6 5.1 RF EXPOSURE COMPLIANCE REQUIREMENT ............................................................................................. 6 5.1.1 Limits .......................................................................................................................................... 6 5.1.2 Test Procedure ........................................................................................................................... 6 5.1.3 EUT RF Exposure Evaluation ................................................................................................... 7-8 SGS-CSTC Standards Technical Services Co., Ltd. Shenzhen Branch Report No.: SZEM201001020202 Page: 4 of 8 4 General Information 4.1 General Description of EUT Product Name: Remote Unit Model No.: DRRU-R304024 Trade Mark: MAVENIR Sample Type: Fixed production Antenna Gain: 4dBi Power Supply: DC48V Optical Fiber: 200cm (unshielded) DC Cable: 200cm (unshielded) RF Cable: 200cm (shielded) Type of Modulation TDD Frequency Band: Downlink 3550MHz to 3700MHz Modulation Type: QPSK, 16QAM, 64QAM, 256QAM System Gain: 20dB MIMO: 2x2MIMO 4x4MIMO The antenna is uncorrelated. Power Control Method: ALC Contains BT/WIFI function Conatins FCC ID: BT: S78-I482E WIFI: NDD9578111008 Frequency range: BT: 2402-2480MHz WIFI: 2412-2462MHz for IEEE 802.11b/g/n(HT20), 2422-2452MHz for IEEE 802.11n(HT40) Antenna Type: Integral Antenna Gain: BT: -1.0 dBi WIFI: 3.0 dBi SGS-CSTC Standards Technical Services Co., Ltd. Shenzhen Branch Report No.: SZEM201001020202 Page: 5 of 8 4.2 Test Location All tests were performed at: SGS-CSTC Standards Technical Services Co., Ltd. Shenzhen Branch No. 1 Workshop, M-10, Middle section, Science & Technology Park, Shenzhen, Guangdong, China 518057 Telephone: +86 (0) 755 2601 2053 Fax: +86 (0) 755 2671 0594 No tests were sub-contracted. 4.3 Test Facility The test facility is recognized, certified, or accredited by the following organizations: • CNAS (No. CNAS L2929) CNAS has accredited SGS-CSTC Standards Technical Services Co., Ltd. Shenzhen Branch EMC Lab to ISO/IEC 17025:2005 General Requirements for the Competence of Testing and Calibration Laboratories (CNAS-CL01 Accreditation Criteria for the Competence of Testing and Calibration Laboratories) for the competence in the field of testing. • A2LA (Certificate No. 3816.01) SGS-CSTC Standards Technical Services Co., Ltd., Shenzhen EMC Laboratory is accredited by the American Association for Laboratory Accreditation(A2LA). Certificate No. 3816.01. • VCCI The 3m Fully-anechoic chamber for above 1GHz, 10m Semi-anechoic chamber for below 1GHz, Shielded Room for Mains Port Conducted Interference Measurement and Telecommunication Port Conducted Interference Measurement of SGS-CSTC Standards Technical Services Co., Ltd. have been registered in accordance with the Regulations for Voluntary Control Measures with Registration No.: G-20026, R-14188, C-12383 and T-11153 respectively. • FCC –Designation Number: CN1178 SGS-CSTC Standa…

Text truncated - open the document above for the full version.

1. Effective (Isotropic) Radiated Power Output Data 1.1 Test result for one carrier per antenna For SISO: Frequency Modulation RB Allocation Conducted Power Antenna gain EIRP dBm/10 MHz Limit (dBm) Verdict SizeOffset Total Power Channel Power dBm dBm/10MHz (dBd)(dBi) EIRP Test data_Test Band: 48 _ Single carrier _ 5MHz Bandwidth LCH QPSK 25 0 19.84 19.84 / 4.00 23.84 30.0 PASS 16QAM 25 0 19.87 19.87 / 4.00 23.87 30.0 PASS 64QAM 25 0 19.81 19.81 / 4.00 23.81 30.0 PASS 256QAM 25 0 19.86 19.86 / 4.00 23.86 30.0 PASS MCH QPSK 25 0 20.40 20.40 / 4.00 24.40 30.0 PASS 16QAM 25 0 20.49 20.49 / 4.00 24.49 30.0 PASS 64QAM 25 0 20.54 20.54 / 4.00 24.54 30.0 PASS 256QAM 25 0 20.53 20.53 / 4.00 24.53 30.0 PASS HCH QPSK 25 0 20.04 20.04 / 4.00 24.04 30.0 PASS 16QAM 25 0 20.14 20.14 / 4.00 24.14 30.0 PASS 64QAM 25 0 20.15 20.15 / 4.00 24.15 30.0 PASS 256QAM 25 0 20.17 20.17 / 4.00 24.17 30.0 PASS EIRP Test data_Test Band: 48 _ Single carrier _ 10MHz Bandwidth LCH QPSK 50 0 19.92 19.92 / 4.00 23.92 30.0 PASS 16QAM 50 0 20.00 20.00 / 4.00 24.00 30.0 PASS 64QAM 50 0 19.89 19.89 / 4.00 23.89 30.0 PASS 256QAM 50 0 19.93 19.93 / 4.00 23.93 30.0 PASS MCH QPSK 50 0 20.09 20.09 / 4.00 24.09 30.0 PASS 16QAM 50 0 20.30 20.30 / 4.00 24.30 30.0 PASS 64QAM 50 0 20.36 20.36 / 4.00 24.36 30.0 PASS 256QAM 50 0 20.32 20.32 / 4.00 24.32 30.0 PASS HCH QPSK 50 0 19.81 19.81 / 4.00 23.81 30.0 PASS 16QAM 50 0 19.80 19.80 / 4.00 23.80 30.0 PASS 64QAM 50 0 19.76 19.76 / 4.00 23.76 30.0 PASS 256QAM 50 0 19.79 19.79 / 4.00 23.79 30.0 PASS EIRP Test data_Test Band: 48 _ Single carrier _ 15MHz Bandwidth LCH QPSK 75 0 19.95 18.54 / 4.00 22.54 30.0 PASS 16QAM 75 0 20.02 18.72 / 4.00 22.72 30.0 PASS 64QAM 75 0 19.92 18.52 / 4.00 22.52 30.0 PASS 256QAM 75 0 19.91 18.51 / 4.00 22.51 30.0 PASS MCH QPSK 75 0 20.42 19.11 / 4.00 23.11 30.0 PASS 16QAM 75 0 20.49 19.25 / 4.00 23.25 30.0 PASS 64QAM 75 0 20.38 19.08 / 4.00 23.08 30.0 PASS 256QAM 75 0 20.44 19.06 / 4.00 23.06 30.0 PASS HCH QPSK 75 0 19.76 18.19 / 4.00 22.19 30.0 PASS 16QAM 75 0 19.71 18.24 / 4.00 22.24 30.0 PASS 64QAM 75 0 19.59 18.04 / 4.00 22.04 30.0 PASS 256QAM 75 0 19.58 18.06 / 4.00 22.06 30.0 PASS EIRP Test data_Test Band: 48 _ Single carrier _ 20MHz Bandwidth LCH QPSK 1000 20.03 17.43 / 4.00 21.43 30.0 PASS 16QAM 1000 20.02 17.38 / 4.00 21.38 30.0 PASS 64QAM 1000 20.06 17.45 / 4.00 21.45 30.0 PASS 256QAM 1000 19.97 17.37 / 4.00 21.37 30.0 PASS MCH QPSK 1000 20.44 17.76 / 4.00 21.76 30.0 PASS 16QAM 1000 20.47 17.73 / 4.00 21.73 30.0 PASS 64QAM 1000 20.54 17.86 / 4.00 21.86 30.0 PASS 256QAM 1000 20.53 17.87 / 4.00 21.87 30.0 PASS HCH QPSK 1000 19.60 16.82 / 4.00 20.82 30.0 PASS 16QAM 1000 19.62 16.71 / 4.00 20.71 30.0 PASS 64QAM 1000 19.65 16.79 / 4.00 20.79 30.0 PASS 256QAM 1000 19.64 16.77 / 4.00 20.77 30.0 PASS Note: 1) EIRP = Conducted output power + Antenna gain (dBi) 2) Full RB test mode has the max power so only show power of full RB Frequency Modulation RB Allocation PSD (dBm/MHz) Antenna gain EIRP PSD (dBm/MHz) Limit (dBm) Verdict Size Offset (dBd) (dBi) PSD Test data_Test Band: 48 _ Single carrier _ 5MHz Bandwidth LCH QPSK 25 0 12.85 /4.0016.85 20.0 PASS 16QAM 25 0 12.88 /4.0016.88 20.0 PASS 64QAM 25 0 12.82/4.0016.82 20.0 PASS 256QAM 25 0 12.87 /4.0016.87 20.0 PASS MCH QPSK 25 0 13.49 /4.0017.49 20.0 PASS 16QAM 25 0 13.50 /4.0017.50 20.0 PASS 64QAM 25 0 13.55 /4.0017.55 20.0 PASS 256QAM 25 0 13.54 /4.0017.54 20.0 PASS HCH QPSK 25 0 13.05 /4.0017.05 20.0 PASS 16QAM 25 0 13.15 /4.0017.15 20.0 PASS 64QAM 25 0 13.16 /4.0017.16 20.0 PASS 256QAM 25 0 13.18 /4.0017.18 20.0 PASS PSD Test data_Test Band: 48 _ Single carrier _ 10MHz Bandwidth LCH QPSK 50 0 9.92 /4.0013.92 20.0 PASS 16QAM 50 0 10.00 /4.0014.00 20.0 PASS 64QAM 50 0 9.90 /4.0013.90 20.0 PASS 256QAM 50 0 9.93 /4.0013.93 20.0 PASS MCH QPSK 50 0 10.29 /4.0014.29 20.0 PASS 16QAM 50 0 10.30 /4.0014.30 20.0 PASS 64QAM 50 0 10.36 /4.0014.36 20.0 PASS 256QAM 50 0 10.32 /4.0014.32 20.0 PASS HCH QPSK 50 0 9.81 /4.0013.81 20.0 PASS 16QAM 50 0 9.80 /4.0013.80 20.0 PASS 64QAM 50 0 9.77 /4.0013.77 20.0 PASS 256QAM 50 0 9.80 /4.0013.80 20.0 PASS PSD Test data_Test Band: 48 _ Single carrier _ 15MHz Bandwidth LCH QPSK 75 0 8.19 /4.0012.19 20.0 PASS 16QAM 75 0 8.26 /4.0012.26 20.0 PASS 64QAM 75 0 8.16 /4.0012.16 20.0 PASS 256QAM 75 0 8.15 /4.0012.15 20.0 PASS MCH QPSK 75 0 8.66 /4.0012.66 20.0 PASS 16QAM 75 0 8.73 /4.0012.73 20.0 PASS 64QAM 75 0 8.62 /4.0012.62 20.0 PASS 256QAM 75 0 8.68 /4.0012.68 20.0 PASS HCH QPSK 75 0 7.99 /4.0011.99 20.0 PASS 16QAM 75 0 7.95 /4.0011.95 20.0 PASS 64QAM 75 0 7.83 /4.0011.83 20.0 PASS 256QAM 75 0 7.82 /4.0011.82 20.0 PASS PSD Test data_Test Band: 48 _ Single carrier _ 20MHz Bandwidth LCH QPSK 100 0 7.02 /4.0011.02 20.0 PASS 16QAM 100 0 7.01 /4.0011.01 20.0 PASS 64QAM 100 0 7.05 /4.0011.05 20.0 PASS 256QAM 100 0 6.96 /4.0010.96 20.0 PASS MCH QPSK 100 0 7.43 /4.0011.43 20.0 PASS 16QAM 100 0 7.46 /4.0011.46 20.0 PASS 64QAM 100 0 7.54 /4.0011.54 20.0 PASS 256QAM 100 0 7.52 /4.0011.52 20.0 PASS HCH QPSK 100 0 6.59 /4.0010.59 20.0 PASS 16QAM 100 0 6.61 /4.0010.61 20.0 PASS 64QAM 100 0 6.64 /4.0010.64 20.0 PASS 256QAM 100 0 6.63 /4.0010.63 20.0 PASS Note: 1) EIRP PSD= Conducted PSD + Antenna gain (dBi) 2) Full RB test mode has the max power so only show power of full RB For 2x2MIMO： For 5MHz, need to back off 0.5dB (19.5dBm per carrier) to meet the Category A CBSD Max EIRP 30dBm/10MHz and Max PSD 20dBm/MHz requirement. Frequency Modulation RB Allocation 2x2MIMO Conducted Power Antenna gain EIRP dBm/10 MHz Limit (dBm) Verdict SizeOffset Total Power Channel Power dBm dBm/10MHz (dBd)(dBi) EIRP Test data_Test Band: 48 _ Single carrier _ 5MHz Bandwidth LCH QPSK 25 0 22.27 22.27 / 4.00 26.27 30.0 PASS 16QAM 25 0 22.31 22.31 / 4.00 26.31 30.0 PASS 64QAM 25 0 22.36 22.36 / 4.00 26.36 30.0 PASS 256QAM 25 0 22.33 22.33 / 4.00 26.33 30.0 PASS MCH QPSK 25 0 22.93 22.93 / 4.00 26.93 30.0 PASS 16QAM 25 0 22.95 22.95 / 4.00 26.95 30.0 PASS 64QAM 25 0 23.01 23.01 / 4.00 27.01 30.0 PASS 256QAM 25 0 23.08 23.08 / 4…

Text truncated - open the document above for the full version.

LTE TDD Band 48, Nominal Bandwidth: 20MHz_2 carriers non‐contiguous , PSD , 2x2 MIMO Modulation : QPSK Modulation : 16QAM/64QAM/256QAM LTE TDD Band 48, Nominal Bandwidth: 5MHz+10MHz_2 carriers contiguous , PSD , 2x2 MIMO Modulation : QPSK LTE TDD Band 48, Nominal Bandwidth: 5MHz+15MHz_2 carriers contiguous , PSD , 2x2 MIMO Modulation : QPSK LTE TDD Band 48, Nominal Bandwidth: 5MHz+20MHz_2 carriers contiguous , PSD , 2x2 MIMO Modulation : QPSK LTE TDD Band 48, Nominal Bandwidth: 10MHz+15MHz_2 carriers contiguous , PSD , 2x2 MIMO Modulation : QPSK LTE TDD Band 48, Nominal Bandwidth: 10MHz+20MHz_2 carriers contiguous , PSD , 2x2 MIMO Modulation : QPSK LTE TDD Band 48, Nominal Bandwidth: 15MHz+20MHz_2 carriers contiguous , PSD , 2x2 MIMO Modulation : QPSK LTE TDD Band 48, Nominal Bandwidth: 5MHz+10MHz_2 carriers non‐contiguous , PSD , 2x2 MIMO Modulation : QPSK LTE TDD Band 48, Nominal Bandwidth: 5MHz+15MHz_2 carriers non‐contiguous , PSD , 2x2 MIMO Modulation : QPSK LTE TDD Band 48, Nominal Bandwidth: 5MHz+20MHz_2 carriers non‐contiguous , PSD , 2x2 MIMO Modulation : QPSK LTE TDD Band 48, Nominal Bandwidth: 10MHz+15MHz_2 carriers non‐contiguous , PSD , 2x2 MIMO Modulation : QPSK LTE TDD Band 48, Nominal Bandwidth: 10MHz+20MHz_2 carriers non‐contiguous , PSD , 2x2 MIMO Modulation : QPSK LTE TDD Band 48, Nominal Bandwidth: 15MHz+20MHz_2 carriers non‐contiguous , PSD , 2x2 MIMO Modulation : QPSK LTE TDD Band 48, Nominal Bandwidth: 5MHz_2 carriers contiguous , PSD , 4x4 MIMO Modulation : QPSK Modulation : 16QAM/64QAM/256QAM LTE TDD Band 48, Nominal Bandwidth: 10MHz_2 carriers contiguous , PSD , 4x4 MIMO Modulation : QPSK Modulation : 16QAM/64QAM/256QAM LTE TDD Band 48, Nominal Bandwidth: 15MHz_2 carriers contiguous , PSD , 4x4 MIMO Modulation : QPSK Modulation : 16QAM/64QAM/256QAM LTE TDD Band 48, Nominal Bandwidth: 20MHz_2 carriers contiguous , PSD , 4x4 MIMO Modulation : QPSK Modulation : 16QAM/64QAM/256QAM LTE TDD Band 48, Nominal Bandwidth: 5MHz_2 carriers non‐contiguous , PSD , 4x4 MIMO Modulation : QPSK Modulation : 16QAM/64QAM/256QAM LTE TDD Band 48, Nominal Bandwidth: 10MHz_2 carriers non‐contiguous , PSD , 4x4 MIMO Modulation : QPSK Modulation : 16QAM/64QAM/256QAM LTE TDD Band 48, Nominal Bandwidth: 15MHz_2 carriers non‐contiguous , PSD , 4x4 MIMO Modulation : QPSK Modulation : 16QAM/64QAM/256QAM LTE TDD Band 48, Nominal Bandwidth: 20MHz_2 carriers non‐contiguous , PSD , 4x4 MIMO Modulation : QPSK Modulation : 16QAM/64QAM/256QAM LTE TDD Band 48, Nominal Bandwidth: 5MHz+10MHz_2 carriers contiguous , PSD , 4x4 MIMO Modulation : QPSK LTE TDD Band 48, Nominal Bandwidth: 5MHz+15MHz_2 carriers contiguous , PSD , 4x4 MIMO Modulation : QPSK LTE TDD Band 48, Nominal Bandwidth: 5MHz+20MHz_2 carriers contiguous , PSD , 4x4 MIMO Modulation : QPSK LTE TDD Band 48, Nominal Bandwidth: 10MHz+15MHz_2 carriers contiguous , PSD , 4x4 MIMO Modulation : QPSK LTE TDD Band 48, Nominal Bandwidth: 10MHz+20MHz_2 carriers contiguous , PSD , 4x4 MIMO Modulation : QPSK LTE TDD Band 48, Nominal Bandwidth: 15MHz+20MHz_2 carriers contiguous , PSD , 4x4 MIMO Modulation : QPSK LTE TDD Band 48, Nominal Bandwidth: 5MHz+10MHz_2 carriers non‐contiguous , PSD , 4x4 MIMO Modulation : QPSK LTE TDD Band 48, Nominal Bandwidth: 5MHz+15MHz_2 carriers non‐contiguous , PSD , 4x4 MIMO Modulation : QPSK LTE TDD Band 48, Nominal Bandwidth: 5MHz+20MHz_2 carriers non‐contiguous , PSD , 4x4 MIMO Modulation : QPSK LTE TDD Band 48, Nominal Bandwidth: 10MHz+15MHz_2 carriers non‐contiguous , PSD , 4x4 MIMO Modulation : QPSK LTE TDD Band 48, Nominal Bandwidth: 10MHz+20MHz_2 carriers non‐contiguous , PSD , 4x4 MIMO Modulation : QPSK LTE TDD Band 48, Nominal Bandwidth: 15MHz+20MHz_2 carriers non‐contiguous , PSD , 4x4 MIMO Modulation : QPSK LTE TDD Band 48, Nominal Bandwidth: 5MHz_3 carriers contiguous , PSD , SISO Modulation : QPSK Modulation : 16QAM/64QAM/256QAM LTE TDD Band 48, Nominal Bandwidth: 10MHz_3 carriers contiguous , PSD , SISO Modulation : QPSK Modulation : 16QAM/64QAM/256QAM LTE TDD Band 48, Nominal Bandwidth: 15MHz_3 carriers contiguous , PSD , SISO Modulation : QPSK Modulation : 16QAM/64QAM/256QAM LTE TDD Band 48, Nominal Bandwidth: 20MHz_3 carriers contiguous , PSD , SISO Modulation : QPSK Modulation : 16QAM/64QAM/256QAM LTE TDD Band 48, Nominal Bandwidth: 5MHz_3 carriers non‐contiguous , PSD , SISO Modulation : QPSK Modulation : 16QAM/64QAM/256QAM LTE TDD Band 48, Nominal Bandw…

Text truncated - open the document above for the full version.