2AWF6-SD70005G Mobile Hotspot

1 SD7000 Quick Start Guide 2 GETTING TO KNOW YOUR HOTSPOT Touch screen Power Key Reset Key Card Slot Charging /Type-C USB 3 Touch Screen Icons and Interfaces Icons Description Network signal strength Network type New SMS Battery power level Settings: To configure the device settings. Wi-Fi status Show the number of connected users. Connect with your computer via a USB Type-C cable. 4 GETTING STARTED Charge the Device Your device battery should have enough power for the Mobile hotspot to turn on and find a signal. You should fully charge the battery as soon as possible. Airplane mode 5 IMPORTANT! Use only approved chargers and USB cables. Insert the SIM card Press and hold the Power key to power on the Hotspot. After a moment the device will connect to the Internet automatically. To install the 4G LTE SIM card 1. Take out the card sticker from the packing box. 2. Align the card sticker with the SIM area on the metal-free side of the card and then stick it. 3. Open the SIM card slot cover. 4. Insert your SIM card. 6 Caution! Do not bend or scratch your SIM card. Avoid exposing your SIM card to static electricity, water, or dirt. To avoid damage to the device, do not use any other kind of SIM cards, or any non-standard SIM card cut from a SIM card. You can get a standard SIM card from your service provider. 7 Start Your Device Press and hold the Power Key to turn your Mobile Hotspot on. Press and release the Power Key to wake the Mobile Hotspot display. NOTE: 8 If the battery is extremely low, you may be unable to power on the device. Please charge your device first. Access the Internet Wi-Fi: Connect to the Wi-Fi network with your mobile device and then access the Internet. 1. Press and hold the Power Key to turn on the Mobile Hotspot . The welcome logo is displayed on the screen, and the Wi-Fi is ON. 2. Use your terminal device to search for the wireless network connection with the Wi-Fi’s SSID “START-xxxx”. 3. Enter the password. 9 NOTE: The default Wi-Fi SSID and password can be found on the Wi-Fi Information screen. From the Home screen, tap Wi-Fi ON or tap Menu to view the default Wi-Fi SSID and password. USB Type-C cable: Connect with the computer via USB port and then access the Internet. Change Your Device Settings You can change the device settings by logging in to the Mobile Hotspot configuration web page. 1. Launch the Internet browser. Enter the Device Manager Website IP address http://192.168.1.1 in the Address bar. 2. Input the Password and then click Log In. 10 3. After the Mobile Hotspot configuration web page is opened, you can change the default settings. NOTE: The default password can be found on the Help Information screen. From the Home screen, tap Help >Admin Website to view the default username and password. 11 Troubleshooting Problem Recommended Action The connection between your device and a client through Wi-Fi cannot be established.  Ensure that the Wi-Fi function is enabled.  Refresh the network list and select the correct SSID.  Check the IP address, and ensure that your client can automatically obtain an IP address.  Enter the correct network key (Wi-Fi password) when you connect the client to your device. 12 The client connected to the device cannot access the Internet.  Ensure that the Wi-Fi function is enabled.  Ensure that your SIM card is available.  Change the location and find a place with good signal.  Contact your service provider and confirm your APN settings. SAFETY PRECAUTIONS • Do not disassemble or open crush, bend or deform, puncture or shred. • Do not modify or remanufacture, attempt to insert foreign objects into the battery, immerse or expose to water or other liquids, expose to fire, explosion or other hazard. • Only use the battery with a charging system that has been qualified with the system per CTIA Certification Requirements for Battery System Compliance to IEEE 1725. Use of an unqualified battery or charger may present a risk of fire, explo- sion, leakage, or other hazard. • Replace the battery only with another battery that has been qualified with the system per this standard, IEEE-Std-1725. Use of an unqualified battery may present a risk of fire, explosion, leakage or other hazard. 13 Only authorized service providers shall replace battery. (If the battery is non-user replaceable). • Promptly dispose of used batteries in accordance with local regulations. • Avoid dropping the hotspot or battery. If the hotspot or battery is dropped, especially on a hard surface, and the user suspects damage, take it to a service center for inspection. • Improper battery use may result in a fire, explosion or other hazard. FCC RF Exposure Information (SAR) This device is designed and manufactured not to exceed the emission limits for exposure to radio frequency (RF) energy set by the Federal Communications Commission of the United States. During SAR testing, this device was set to transmit at its highest certified power level in all tested frequency bands, and placed in positions that simulate RF exposure in usage near the body with the separation of 10mm. Although the SAR is determined at the highest certified power level, the actual SAR level of the device while operating can be well below the maximum value. This is because the hotspot is designed to operate at multiple power levels so as to use only the power required to reach the network. In general, the closer you are to a wireless base station antenna, the lower the power output. 14 The exposure standard for wireless devices employing a unit of measurement is known as the Specific Absorption Rate, or SAR. The SAR limit set by the FCC is 1.6 W/kg. This device is complied with SAR for general population / uncontrolled exposure limits in ANSI/IEEE C95.1-2019 and had been tested in accordance with the measurement methods and procedures specified in IEEE1528. The FCC has granted an Equipment Authorization for this model hotspot with all reported SAR levels evaluated as in compliance with the…

Text truncated - open the document above for the full version.

Page 241 of 326 Report No.: AiTSZ-260109006FW5 Page 242 of 326 Report No.: AiTSZ-260109006FW5 Page 243 of 326 Report No.: AiTSZ-260109006FW5 Page 244 of 326 Report No.: AiTSZ-260109006FW5 Page 245 of 326 Report No.: AiTSZ-260109006FW5 Page 246 of 326 Report No.: AiTSZ-260109006FW5 Page 247 of 326 Report No.: AiTSZ-260109006FW5 Page 248 of 326 Report No.: AiTSZ-260109006FW5 Page 249 of 326 Report No.: AiTSZ-260109006FW5 Page 250 of 326 Report No.: AiTSZ-260109006FW5 Page 251 of 326 Report No.: AiTSZ-260109006FW5 Page 252 of 326 Report No.: AiTSZ-260109006FW5 Page 253 of 326 Report No.: AiTSZ-260109006FW5 Page 254 of 326 Report No.: AiTSZ-260109006FW5 Page 255 of 326 Report No.: AiTSZ-260109006FW5 Page 256 of 326 Report No.: AiTSZ-260109006FW5 Page 257 of 326 Report No.: AiTSZ-260109006FW5 Page 258 of 326 Report No.: AiTSZ-260109006FW5 Page 259 of 326 Report No.: AiTSZ-260109006FW5 Page 260 of 326 Report No.: AiTSZ-260109006FW5

Page 1 of 2 FCC ID: 2AWF6-SD7000 Page 2 of 2 FCC ID: 2AWF6-SD7000

Page 1 of 57 Report No.: AiTSZ-260109006FW2 1.Duty Cycle 1.1 Test Result and Data Test ModeAntennaFrequency [MHz]ON Time [ms]Period [ms]Duty Cycle [%]DC Factor 11AAnt151802.092.1199.050.04 11AAnt251802.102.1299.060.04 11AAnt157452.102.1199.530.02 11AAnt257452.102.1199.530.02 11N20SISOAnt151805.435.4599.630.02 11N20SISOAnt251805.425.4499.630.02 11N20SISOAnt157455.435.4599.630.02 11N20SISOAnt257455.425.4499.630.02 11N20MIMOAnt151805.425.4499.630.02 11N20MIMOAnt251805.425.4599.450.02 11N20MIMOAnt157455.425.4499.630.02 11N20MIMOAnt257455.425.4499.630.02 11N40SISOAnt151905.435.4499.820.01 11N40SISOAnt251905.435.4599.630.02 11N40SISOAnt157555.425.4599.450.02 11N40SISOAnt257555.425.4599.450.02 11N40MIMOAnt151905.425.4499.630.02 11N40MIMOAnt251905.425.4599.450.02 11N40MIMOAnt157555.425.4599.450.02 11N40MIMOAnt257555.425.4599.450.02 11AC20SISOAnt151805.425.4499.630.02 11AC20SISOAnt251805.425.4499.630.02 11AC20SISOAnt157455.445.4599.820.01 11AC20SISOAnt257455.425.4599.450.02 11AC20MIMOAnt151805.435.4599.630.02 Page 2 of 57 Report No.: AiTSZ-260109006FW2 11AC20MIMOAnt251805.435.4599.630.02 11AC20MIMOAnt157455.425.4599.450.02 11AC20MIMOAnt257455.425.4599.450.02 11AC40SISOAnt151905.425.4599.450.02 11AC40SISOAnt251905.425.4599.450.02 11AC40SISOAnt157555.435.4599.630.02 11AC40SISOAnt257555.435.4599.630.02 11AC40MIMOAnt151905.425.4599.450.02 11AC40MIMOAnt251905.425.4599.450.02 11AC40MIMOAnt157555.425.4499.630.02 11AC40MIMOAnt257555.435.4599.630.02 11AC80SISOAnt152105.435.4599.630.02 11AC80SISOAnt252105.425.4599.450.02 11AC80SISOAnt157755.435.4599.630.02 11AC80SISOAnt257755.435.4599.630.02 11AC80MIMOAnt152105.435.4599.630.02 11AC80MIMOAnt252105.425.4599.450.02 11AC80MIMOAnt157755.435.4599.630.02 11AC80MIMOAnt257755.435.4599.630.02 11AX20SISOAnt151805.445.4699.630.02 11AX20SISOAnt251805.445.4699.630.02 11AX20SISOAnt157455.455.4799.630.02 11AX20SISOAnt257455.445.4699.630.02 11BE20MIMOAnt151805.445.4699.630.02 11BE20MIMOAnt251805.435.4699.450.02 11BE20MIMOAnt257455.445.4699.630.02 11BE20MIMOAnt157455.445.4699.630.02 11AX40SISOAnt151905.435.4699.450.02 Page 3 of 57 Report No.: AiTSZ-260109006FW2 11AX40SISOAnt251905.435.4699.450.02 11AX40SISOAnt157555.455.4699.820.01 11AX40SISOAnt257555.445.4699.630.02 11AX40MIMOAnt151905.455.4699.820.01 11AX40MIMOAnt251905.435.4699.450.02 11AX40MIMOAnt157555.435.4599.630.02 11AX40MIMOAnt257555.425.4499.630.02 11AX80SISOAnt152105.445.4699.630.02 11AX80SISOAnt252105.445.4699.630.02 11AX80SISOAnt157755.435.4699.450.02 11AX80SISOAnt257755.445.4699.630.02 11AX80MIMOAnt152105.445.4699.630.02 11AX80MIMOAnt252105.445.4699.630.02 11AX80MIMOAnt157755.445.4699.630.02 11AX80MIMOAnt257755.435.4699.450.02 11BE20SISOAnt151805.455.4799.630.02 11BE20SISOAnt251805.455.4799.630.02 11BE20SISOAnt157455.455.4799.630.02 11BE20SISOAnt257455.445.4799.450.02 11BE20MIMOAnt151805.465.4899.640.02 11BE20MIMOAnt251805.455.4799.630.02 11BE20MIMOAnt157455.455.4899.450.02 11BE20MIMOAnt257455.455.4699.820.01 11BE40SISOAnt151905.455.4799.630.02 11BE40SISOAnt251905.455.4799.630.02 11BE40SISOAnt157555.455.4799.630.02 11BE40SISOAnt257555.455.4899.450.02 11BE40MIMOAnt151905.455.4799.630.02 Page 4 of 57 Report No.: AiTSZ-260109006FW2 11BE40MIMOAnt251905.465.4899.640.02 11BE40MIMOAnt157555.455.4799.630.02 11BE40MIMOAnt257555.455.4799.630.02 11BE80SISOAnt152105.465.4799.820.01 11BE80SISOAnt252105.455.4799.630.02 11BE80SISOAnt157755.455.4799.630.02 11BE80SISOAnt257755.455.4799.630.02 11BE80MIMOAnt152105.455.4799.630.02 11BE80MIMOAnt252105.445.4799.450.02 11BE80MIMOAnt157755.455.4799.630.02 11BE80MIMOAnt257755.465.4899.640.02 Test ModeAntennaFrequency [MHz]RuSizeRuIndexON Time[ms]Period [ms]Duty Cycle [%] 11BE20MIMOAnt1518026ToneRU05.095.1199.61 11BE20MIMOAnt2518026ToneRU05.085.1399.03 11BE20MIMOAnt1518026ToneRU85.095.1199.61 11BE20MIMOAnt2518026ToneRU85.095.1399.22 11BE20MIMOAnt1520026ToneRU05.095.1499.03 11BE20MIMOAnt2520026ToneRU05.095.1598.83 11BE20MIMOAnt1520026ToneRU85.095.1299.41 11BE20MIMOAnt2520026ToneRU85.085.1399.03 11BE20MIMOAnt1524026ToneRU05.095.1199.61 11BE20MIMOAnt2524026ToneRU05.095.1199.61 11BE20MIMOAnt1524026ToneRU810.1910.2599.41 11BE20MIMOAnt2524026ToneRU85.095.1499.03 11BE20MIMOAnt2574526ToneRU05.095.1199.61 11BE20MIMOAnt1574526ToneRU05.095.1199.61 Page 5 of 57 Report No.: AiTSZ-260109006FW2 11BE20MIMOAnt2574526ToneRU85.095.1399.22 11BE20MIMOAnt1574526ToneRU85.095.1499.03 11BE20MIMOAnt1578526ToneRU05.095.1299.41 11BE20MIMOAnt2578526ToneRU05.095.1199.61 11BE20MIMOAnt1578526ToneRU85.095.1499.03 11BE20MIMOAnt2578526ToneRU85.085.1099.61 11BE20MIMOAnt1582526ToneRU05.085.1399.03 11BE20MIMOAnt2582526ToneRU05.095.1199.61 11BE20MIMOAnt1582526ToneRU85.085.1199.41 11BE20MIMOAnt2582526ToneRU85.095.1199.61 Page 6 of 57 Report No.: AiTSZ-260109006FW2 2 Bandwidth 2.1 99% Occupied Bandwidth and 26dB Emission Bandwidth 2.1.1 Test Result and Data Test ModeAntennaFrequency[MHz]99% OBW[MHz]26dB EBW[MHz]Verdict 11AAnt1518016.88922.400PASS 11AAnt2518016.80022.640PASS 11AAnt1520016.86622.960PASS 11AAnt2520016.84622.520PASS 11AAnt1524016.86323.240PASS 11AAnt2524016.83922.800PASS 11AAnt1574517.12822.240PASS 11AAnt2574517.17422.160PASS 11AAnt1578517.13022.280PASS 11AAnt2578517.19222.040PASS 11AAnt1582517.15221.960PASS 11AAnt2582517.17322.000PASS 11N20SISOAnt1518017.99623.280PASS 11N20SISOAnt2518017.95023.040PASS 11N20SISOAnt1520017.96223.240PASS 11N20SISOAnt2520017.97623.560PASS 11N20SISOAnt1524017.88023.520PASS 11N20SISOAnt2524017.98123.200PASS 11N20SISOAnt1574518.22622.800PASS 11N20SISOAnt2574518.23922.600PASS 11N20SISOAnt1578518.18622.600PASS 11N20SISOAnt2578518.22222.480PASS 11N20SISOAnt1582518.26522.480PASS 11N20SISOAnt2582518.25822.520PASS Page 7 of 57 Report No.: AiTSZ-260109006FW2 11N20MIMOAnt1518018.28824.800PASS 11N20MIMOAnt2518018.30824.800PASS 11N20MIMOAnt1520018.46324.680PASS 11N20MIMOAnt2520018.29924.000PASS 11N20MIMOAnt1524018.40824.360PASS 11N20MIMOAnt2524018.37523.960PASS 11N20MIMOAnt1574518.02623.080PASS 11N20MIMOAnt2574518.00023.400PASS 11N20MIMOAnt1578517.99622.840PASS 11N20MIMOAnt2578517.89123.520PASS …

Text truncated - open the document above for the full version.

Page 1 of 32 Report No.: AiTSZ-260109006FW2 Note: This device has been tested and found to comply with the standard(s) listed, this test report merely corresponds to the test sample. It is not permitted to copy extracts of these test result without the written permission of the test laboratory. This report shall not be reproduced except in full, without the written approval of Guangdong Asia Hongke Test Technology Limited. If there is a need to alter or revise this document, the right belongs to Guangdong Asia Hongke Test Technology Limited, and it should give a prior written notice of the revision document. This test report must not be used by the client to claim product endorsement. Guangdong Asia Hongke Test Technology Limited B1/F, Building 11, Junfeng Industrial Park, Chongqing Road, Heping Community, Fuhai Street, Bao'an District, Shenzhen, Guangdong, China. TEST REPORT Product Name:5G Mobile Hotspot Brand Name:START Model: SD7000 Series Model: N/A FCC ID:2AWF6-SD7000 Applicant:START USA, INC. Address: 5600 Tennyson Parkway, Suite 390, Plano, TX 75024, USA Manufacturer:START USA, INC. Address: 5600 Tennyson Parkway, Suite 390, Plano, TX 75024, USA Standard(s):FCC CFR Title 47 Part 15 Subpart E Section 15.407 Date of Receipt:Jan. 05, 2026 Date of Test:Jan. 05, 2026~ Jan. 21, 2026 Issued Date:Jan. 21, 2026 Issued By: Guangdong Asia Hongke Test Technology Limited B1/F, Building 11, Junfeng Industrial Park, Chongqing Road, Heping Community, Fuhai Street, Bao'an District, Shenzhen, Guangdong, China Tel.: +86 0755-230967639 Fax.: +86 0755-230967639 Reviewed by: Approved by: Aalen.Ye Allen Wang Page 2 of 32 Report No.: AiTSZ-260109006FW2 Report Revise Record Report VersionIssued DateNotes M0Jan. 21, 2026Initial Release Page 3 of 32 Report No.: AiTSZ-260109006FW2 Contents 1TEST SUMMARY......................................................................................................................................................4 1.1TEST STANDARDS.........................................................................................................................................................4 1.2TEST SUMMARY...........................................................................................................................................................4 1.3TEST FACILITY..............................................................................................................................................................5 1.4MEASUREMENT UNCERTAINTY........................................................................................................................................5 2GENERAL INFORMATION........................................................................................................................................6 2.1ENVIRONMENTAL CONDITIONS........................................................................................................................................6 2.2GENERAL DESCRIPTION OF EUT......................................................................................................................................6 2.3DESCRIPTION OF TEST MODES AND TEST FREQUENCY.........................................................................................................8 2.4SPECIAL ACCESSORIES...................................................................................................................................................8 2.5EQUIPMENT LIST FOR THE TEST.......................................................................................................................................9 3TEST CONDITIONS AND RESULTS...........................................................................................................................10 3.1CONDUCTED EMISSIONS TEST.......................................................................................................................................10 3.2RADIATED EMISSIONS AND BAND EDGE..........................................................................................................................13 3.3MAXIMUM CONDUCTED AVERAGE OUTPUT POWER.........................................................................................................24 3.4POWER SPECTRAL DENSITY..........................................................................................................................................26 3.526DB EMISSION BANDWIDTH AND 99% OCCUPIED BANDWIDTH........................................................................................28 3.6MINIMUM EMISSION BANDWIDTH (6DBM BANDWIDTH)..................................................................................................29 3.7FREQUENCY STABILITY.................................................................................................................................................30 3.8ANTENNA REQUIREMENT.............................................................................................................................................31 4TEST SETUP PHOTOGRAPHS OF EUT......................................................................................................................32 5PHOTOS OF EUT....................................................................................................................................................33 Page 4 of 32 Report No.: AiTSZ-260109006FW2 1TEST SUMMARY 1.1Test Standards The tests were performed according to following standards: FCC Rules Part 15 Subpart E—Unlicensed National Information Infrastructure Devices. ANSI C63.10: 2020: American National Standard for Testing Unlicensed Wireless Devices KDB789033 D02: General UNII Test Procedures New Rules v02r01. 1.2Test Summary FCC Requirement FCC Part 15.207AC Power Conducted EmissionPASS FCC Part 15.407(a)Emission Bandwidth(26dB Bandwidth)PASS Note1 FCC Part 15.407(e) Minimum Emission Bandwidth(6dB Bandwidth) PASS Note2 FCC Part 15.407(a)Maximum Conducted Output PowerPASS…

Text truncated - open the document above for the full version.

ANTENNA SPECIFICATION Supplier Name Shenzhen ETHETA Communication Technology Co., Ltd. Supplier Address Zone B, 3rd Floor, Building 1, Baisha Logistics Park, Xili Street, Nanshan District, Shenzhen, China. Products Name FPC Antenna Supplier Part No. RD1702402NB87-1/RD1702402NB87-2 /RD1702402NB87-3/ RD1702402NB87-4/RD1702402NB87-5 /RD1702402NB87-6/ RD1702402NB87-7/RD1702402NB87-8 Specification Description 7 models FPC antenna used for project SD7000 Internal Part No. XSD631400099A/XSD631400114A/XSD631400100A/ XSD631400101A/XSD631400102A/XD631400103A/ Date of Recognition 2025.02.12 Content 1. Product Specifications 2. 2D & ID drawing and schematic diagram 3. Size report ANT 0 Frequency efficiency Gian B5/26/2 /4/25 N77/48 B12/13 B71 600 -24.95 -16.03 -8.74 -5.45 610 -24.17 -14.96 -7.68 -4.67 620 -23.19 -13.73 -7.67 -4.38 630 -22.09 -12.42 -6.74 -4.52 640 -21 -11.14 -6.14 -5.13 650 -20.01 -10 -5.67 -5.86 660 -18.94 -8.83 -5.38 - 5.36 670 -18.01 -7.93 -5.45 -7.36 680 -17.01 -6.95 -5.38 -6.56 690 -15.82 -4.46 -5.13 -5.59 700 -14.9 -4.33 -5.21 -4.52 710 -13.66 -4.54 -5.12 -1.33 720 -12.79 -3.96 -5.15 -1.84 730 -11.73 -3.88 -5.15 -1.59 740 -10.8 -3.77 -5.21 -1.34 750 -9.83 -3.49 -5.05 -1.17 760 -9.02 -3.51 -5.08 -0.94 770 -8.17 -3.58 -5.24 -0.8 780 -7.02 -3.45 -5.21 -0.65 790 -5.99 -3.37 -5.14 -0.36 800 -5.1 -3.57 -5.35 -0.21 810 -4.26 -3.63 -5.43 0.74 820 -3.83 -4.02 -5.92 2.03 830 -3.35 -4.67 -6.71 3.64 840 -3.03 -5.58 -7.63 3.46 850 -2.96 -6.32 -7.63 4.25 860 -2.96 -5.83 -6.59 3.96 870 -3.15 -5.18 -5.89 3.09 880 -3.44 -4.66 -5.34 2.62 890 -3.94 -4.44 -5.03 1.75 900 -4.79 -4.56 -5.02 0.72 910 -5.6 -4.5 -4.79 -0.4 920 -6.68 -4.71 -4.8 -0.04 930 -7.9 -4.93 -4.79 0.58 1700 -4.67 -5.1 -5.96 1.08 1710 -4.37 -5.27 -6.15 1.38 1720 -4.28 -5.38 -6.25 1.48 1730 -4.07 -5.29 -6.12 1.38 1740 -3.8 -5.15 -5.92 0.63 1750 -4.62 -4.95 -5.67 -0.24 1760 -4.42 -4.7 -5.4 -0.49 1770 -4.31 -4.52 -5.23 -0.63 1780 -4.17 -4.34 -5.08 -0.91 1790 -4.09 -4.22 -5.01 -0.58 1800 -3.92 -4 -4.83 -0.58 1810 -3.98 -4.06 -4.97 -0.41 1820 -3.87 -3.89 -4.87 -0.24 1830 -3.83 -3.77 -4.86 -0.27 1840 -4.01 -3.82 -5.04 -0.42 1850 -4.26 -3.92 -5.24 -0.69 1860 -4.45 -3.91 -5.3 -1.01 1870 -4.66 -4.07 -5.39 -1.05 1880 -4.57 -4.18 -5.3 -0.77 1890 -4.58 -4.43 -5.27 -0.57 1900 -4.45 -4.5 -5.1 -0.29 1910 -4.52 -4.73 -5.12 -0.14 1920 -4.49 -4.93 -5.13 0.03 1930 -4.45 -5.08 -5.17 -0.07 1940 -4.5 -5.34 -5.31 -0.1 1950 -4.35 -5.3 -5.21 0.12 1960 -4.39 -5.35 -5.22 0.26 1970 -4.38 -5.26 -5.14 0.31 1980 -4.49 -5.28 -5.17 -0.14 1990 -4.53 -5.18 -5.11 0.23 2000 -4.54 -5.14 -5.06 0.81 2010 -4.44 -5.06 -4.88 1.27 2020 -4.45 -5.14 -4.8 1.54 2030 -4.51 -5.25 -4.77 1.51 2040 -4.54 -5.35 -4.7 1.55 2050 -4.51 -5.38 -4.58 1.49 2060 -4.65 -5.57 -4.65 1.46 2070 -4.55 -5.51 -4.5 1.39 2080 -4.73 -5.73 -4.64 1.31 2090 -4.69 -5.68 -4.56 1.11 2100 -4.82 -5.79 -4.69 0.89 2110 -4.93 -5.81 -4.78 0.94 2120 -4.95 -5.71 -4.86 0.81 2130 -5.44 -5.68 -5.1 0.91 2140 -5.23 -5.55 -5.35 2.69 2150 -5.16 -5.63 -5.74 2.3 2160 -5.18 -5.63 -6.14 1.85 2170 -5.22 -5.98 -6.88 1.46 2180 -5.59 -6.17 -7.49 1.09 2190 -5.74 -6.15 -7.86 0.7 2200 -5.85 -6.27 -8.3 0.47 2210 -8.8 -6.24 -8.38 -0.1 2220 -8.65 -6.1 -8.19 -0.54 2230 -8.29 -6.04 -7.74 -1.05 2240 -8.26 -6.17 -7.51 -1.54 2250 -8.47 -6.34 -7.62 -2.15 2260 -8.84 -6.39 -7.93 -2.7 2270 -9.17 -6.67 -8.22 -3.24 2280 -9.01 -6.76 -7.98 -3.63 2290 -8.8 -6.81 -7.57 -4.05 2300 -8.71 -6.89 -7.24 -4.3 3200 -8.8 -7.1 -5.97 -4.4 3220 -8.67 -6.7 -6.54 -4.46 3240 -8.76 -6.49 -7.46 -4.5 3260 -8.74 -6.37 -8.22 -3.91 3280 -8.46 -6.33 -8.42 -3.89 3300 -7.3 -6.59 -8.69 -3.89 3320 -6.33 -6.7 -8.68 -3.8 3340 -5.48 -6.8 -8.54 -3.66 3360 -5.21 -7.19 -8.69 -3.69 3380 -5.32 -7.56 -8.78 -3.52 3400 -5.59 -7.74 -8.67 -3.05 3420 -5.98 -8 -8.68 -2.65 3440 -6.1 -8.01 -8.49 -2.31 3460 -6.23 -8.11 -8.41 -2.3 3480 -6.24 -7.97 -8.15 -1.86 3500 -6.2 -7.68 -7.8 -1.95 3520 -6.45 -7.68 -7.78 -1.91 3540 -6.43 -7.45 -7.53 -1.25 3560 -6.51 -7.32 -7.41 -1.73 3580 -6.69 -7.3 -7.44 -2.25 3600 -6.94 -7.44 -7.65 -2.71 3620 -7.22 -7.81 -8.03 -3.2 3640 -7.16 -8.06 -8.15 -3.28 3660 -6.57 -7.65 -7.53 -3.3 3680 -6.17 -7.13 -6.87 -3.59 3700 -6.04 -6.82 -6.5 -3.82 3720 -5.98 -6.68 -6.35 -3.95 3740 -6.03 -6.76 -6.42 -4.32 3760 -6 -6.79 -6.47 -4.63 3780 -5.85 -6.64 -6.36 -4.84 3800 -5.49 -6.19 -5.91 -5.13 3820 -5.36 -5.89 -5.62 -5.53 3840 -5.43 -5.77 -5.56 -5.82 3860 -5.6 -5.74 -5.59 -5.91 3880 -5.93 -5.89 -5.8 -6.04 3900 -6.25 -6.02 -5.98 -5.82 3920 -6.64 -6.28 -6.29 -5.48 3940 -6.95 -6.57 -6.63 -1.1 3960 -6.24 -6.85 -6.98 -1.58 3980 -6.58 -7.11 -7.33 -2.12 4000 -6.88 -7.28 -7.57 -2.55 4020 -6.9 -7.27 -7.57 -3.07 4040 -7.16 -7.56 -7.86 -3.25 4060 -7.2 -7.69 -7.97 -3.23 4080 -7.27 -7.82 -8.14 -3.51 4100 -7.51 -8.1 -8.46 -3.73 4120 -7.77 -8.37 -8.74 -3.86 4140 -8.06 -8.76 -9.07 -4.2 4160 -8.11 -9.06 -9.2 -4.3 4180 -8.05 -9.3 -9.2 -4.3 4200 -7.93 -9.46 -9.08 -4.01 ANT 1 Frequency efficiency Gian B5/26/ 2/ 4/25 N77/48 B12/13 B71 600 -29.45 -20.22 -9.51 -5.96 610 -28.64 -19.02 -8.79 -5.52 620 -27.73 -17.72 -7.97 -5.32 630 -26.76 -16.3 -7.42 -4.73 640 -25.74 -14.93 -7.31 -4.26 650 -24.84 -13.53 -7.42 -4.36 660 -23.91 -12.18 -7.64 -4.06 670 -23.17 -11.07 -8.03 -4.98 680 -22.25 -9.76 -8.41 -5.21 690 -21.3 -6.29 -8.58 -5.97 700 -20.6 -6.46 -8.98 -6.47 710 -19.59 -6.59 -9.16 -6.14 720 -19 -6.12 -10.31 -4.42 730 -18.16 -5.88 -10.52 -3.36 740 -17.3 -6.04 -10.86 -3.47 750 -16.12 -6.09 -10.92 -2.82 760 -15.21 -6.44 -11.1 -3.04 770 -14.32 -6.92 -11.37 -3.07 780 -13.2 -7.13 -11.36 -5.88 790 -12.66 -7.82 -11.89 -7.77 800 -12.18 -8.66 -12.51 -8.66 810 -11.9 -9.9 -13.57 -7.11 820 -11.95 -11.85 -15.21 -6.5 830 -11.42 -13.25 -16.04 -5.95 840 -9.99 -13.44 -16.14 -5.57 850 -7.99 -12.36 -15.34 -4.04 860 -5.29 -11.34 -14.25 0 . 8 1 870 -5.36 -10.86 -13.47 1.63 880 -4.79 -10.71 -13 2.06 890 -4.72 -10.84 -12.86 3.76 900 -5.16 -11.11 -12.9 1.75 910 -5.43 -11.13 -12.73 0.84 920 -6.2 -11.54 -12.95 - 0.29 930 -6.78 -11.83 -13.07 -1.67 1700 -10.19 -8.05 -7.16 -4.94 1710 -9.79 -7.94 -6.97 -4.35 1720 -9.43 -7.69 -6.74 -4.41 1730…

Text truncated - open the document above for the full version.

1 / 50 Testing result (LTE Band 2 ANT 0, Front, Low, 10mm) Date of measurement: 12/30/2025 A. Experimental conditions. E-Field ProbeSATIMO 0523-EPGO-403 Area Scandx=15mm dy=15mm Zoom Scan5x5x7,dx=8mm dy=8mm dz=5mm PhantomValidation plane Device PositionBody BandLTE Band 2 ChannelsLow SignalLTE(Crest factor: 1.0) B. Permitivity Frequency (MHz)1860.0 Relative permittivity (real part)40.69 Conductivity (S/m)1.38 C. SAR Surface and Volume SURFACE SARVOLUME SAR Maximum location: X=-11.00, Y=-12.00 ; SAR Peak: 1.01 W/kg D. SAR 1g & 10g SAR 10g (W/Kg)0.349 SAR 1g (W/Kg)0.627 Variation (%)-1.990 Horizontal validation criteria: minimum distance (mm) 16.000000 Vertical validation criteria: SAR ratio M2/M1 (%)61.644329 XM1-11.000000 YM1-12.000000 ZM14.000000 XM2-11.000000 YM2-12.000000 ZM29.000000 2 / 50 E. Z Axis Scan Z Axis Scan F. 3D Image 3D screen shotHot spot position 3 / 50 Testing result (LTE Band 4 ANT 0, Front, High, 10mm) Date of measurement: 12/24/2025 A. Experimental conditions. E-Field ProbeSATIMO 0523-EPGO-403 Area Scandx=15mm dy=15mm Zoom Scan5x5x7,dx=8mm dy=8mm dz=5mm PhantomValidation plane Device PositionBody BandLTE Band 4 ChannelsHigh SignalLTE(Crest factor: 1.0) B. Permitivity Frequency (MHz)1745.0 Relative permittivity (real part)40.17 Conductivity (S/m)1.34 C. SAR Surface and Volume SURFACE SARVOLUME SAR Maximum location: X=3.00, Y=-13.00 ; SAR Peak: 0.91 W/kg D. SAR 1g & 10g SAR 10g (W/Kg)0.340 SAR 1g (W/Kg)0.587 Variation (%)0.560 Horizontal validation criteria: minimum distance (mm) 17.888544 Vertical validation criteria: SAR ratio M2/M1 (%)63.569381 XM13.000000 YM1-13.000000 ZM14.000000 XM23.000000 YM2-13.000000 ZM29.000000 4 / 50 E. Z Axis Scan Z Axis Scan F. 3D Image 3D screen shotHot spot position 5 / 50 Testing result (LTE Band 5 ANT 0, Back, High, 10mm) Date of measurement: 01/09/2026 A. Experimental conditions. E-Field ProbeSATIMO 0523-EPGO-403 Area Scandx=15mm dy=15mm Zoom Scan5x5x7,dx=8mm dy=8mm dz=5mm PhantomValidation plane Device PositionBody BandLTE Band 5 ChannelsHigh SignalLTE(Crest factor: 1.0) B. Permitivity Frequency (MHz)844.0 Relative permittivity (real part)41.26 Conductivity (S/m)0.90 C. SAR Surface and Volume SURFACE SARVOLUME SAR Maximum location: X=-1.00, Y=-15.00 ; SAR Peak: 0.42 W/kg D. SAR 1g & 10g SAR 10g (W/Kg)0.238 SAR 1g (W/Kg)0.329 Variation (%)0.650 Horizontal validation criteria: minimum distance (mm) 16.443210 Vertical validation criteria: SAR ratio M2/M1 (%)61.231210 XM1-1.000000 YM1-15.000000 ZM14.000000 XM2-1.000000 YM2-15.000000 ZM26.000000 6 / 50 E. Z Axis Scan Z Axis Scan F. 3D Image 3D screen shotHot spot position 7 / 50 Testing result (LTE Band 12 ANT 0, Back, Middle, 10mm) Date of measurement: 12/31/2025 A. Experimental conditions. E-Field ProbeSATIMO 0523-EPGO-403 Area Scandx=15mm dy=15mm Zoom Scan5x5x7,dx=8mm dy=8mm dz=5mm PhantomValidation plane Device PositionBody BandLTE Band 12 ChannelsMiddle SignalLTE(Crest factor: 1.0) B. Permitivity Frequency (MHz)707.5 Relative permittivity (real part)42.01 Conductivity (S/m)0.84 C. SAR Surface and Volume SURFACE SARVOLUME SAR Maximum location: X=-9.00, Y=-10.00 ; SAR Peak: 0.27 W/kg D. SAR 1g & 10g SAR 10g (W/Kg)0.158 SAR 1g (W/Kg)0.217 Variation (%)-1.080 Horizontal validation criteria: minimum distance (mm) 15.841320 Vertical validation criteria: SAR ratio M2/M1 (%)63.415410 XM1-9.000000 YM1-10.000000 ZM14.000000 XM2-9.000000 YM2-10.000000 ZM27.000000 8 / 50 E. Z Axis Scan Z Axis Scan F. 3D Image 3D screen shotHot spot position 9 / 50 Testing result (LTE Band 13 ANT 0, Back, Middle, 10mm) Date of measurement: 12/31/2025 A. Experimental conditions. E-Field ProbeSATIMO 0523-EPGO-403 Area Scandx=15mm dy=15mm Zoom Scan5x5x7,dx=8mm dy=8mm dz=5mm PhantomValidation plane Device PositionBody BandLTE Band 13 ChannelsMiddle SignalLTE(Crest factor: 1.0) B. Permitivity Frequency (MHz)782.0 Relative permittivity (real part)41.56 Conductivity (S/m)0.90 C. SAR Surface and Volume SURFACE SARVOLUME SAR Maximum location: X=-7.00, Y=-11.00 ; SAR Peak: 0.32 W/k D. SAR 1g & 10g SAR 10g (W/Kg)0.183 SAR 1g (W/Kg)0.251 Variation (%)-3.220 Horizontal validation criteria: minimum distance (mm) 16.134650 Vertical validation criteria: SAR ratio M2/M1 (%)62.165460 XM1-7.000000 YM1-11.000000 ZM14.000000 XM2-7.000000 YM2-11.000000 ZM22.000000 10 / 50 E. Z Axis Scan Z Axis Scan F. 3D Image 3D screen shotHot spot position 11 / 50 Testing result (LTE Band 25 ANT 0, Front, High, 10mm) Date of measurement: 12/30/2025 A. Experimental conditions. E-Field ProbeSATIMO 0523-EPGO-403 Area Scandx=15mm dy=15mm Zoom Scan5x5x7,dx=8mm dy=8mm dz=5mm PhantomValidation plane Device PositionBody BandLTE Band 25 ChannelsHigh SignalLTE(Crest factor: 1.0) B. Permitivity Frequency (MHz)1905.0 Relative permittivity (real part)40.53 Conductivity (S/m)1.40 C. SAR Surface and Volume SURFACE SARVOLUME SAR Maximum location: X=-9.00, Y=2.00 ; SAR Peak: 0.67 W/kg D. SAR 1g & 10g SAR 10g (W/Kg)0.250 SAR 1g (W/Kg)0.435 Variation (%)-1.600 Horizontal validation …

Text truncated - open the document above for the full version.