2AWLG-T3P116V1Laptop

T3P116V1 user manual Explanation This manual is mainly aimed at Windows 11 Home, and if you use other Windows systems, it may be slightly different. This manual contains common features for most models, which may not match your model in some aspects, or some of your model features may not be included in this manual. The illustrations in this manual may differ from the actual product, please refer to the actual product. ■ Please read safety precautions and important tips carefully and patientlyBefore using the computer! Ports and Connectivity: Attention: When turning off the monitor, be careful not to leave a pen or any other object between the monitor and keyboard. Otherwise, it may damage the display Keyboard Function Key Description The followin g keyboard shortcuts provide easy access to these functions： 【Fn+ESC】Lock/Unlock Touchpad 【Fn+F1】 Mu te device 【Fn+F2】 Reduce volume 【Fn+F3】 Increase volume 【Fn+F4】 Reduce screen brightness 【Fn+F5】 Increase screen brightness 【Fn+F6】 Move the cursor to the Front of the text 【Fn+F7】 Cursor Up 【Fn+F8】 Cursor Down 【Fn+F9】 Move the cursor to the End of the text 【Fn+F10】Text Overlay&Text Insertion 【Fn+F11】 Scroll Lock 【Fn+F12】 Pause  。  Warning! The adapter may become hot during use. Please ensure that nothing covers the adapter and keep it away from your body. Using battery power This laptop is designed to be powered by a removable battery pack. A battery pack consists of multiple batteries assembled together. After being fully charged, the battery pack can provide several hours of battery life, if further extended by setting. Warning! For safety reasons, do not throw the battery into the fire. Do not short-circuit the positive and negative terminals of the battery. Do not disassemble the battery yourself. If any abnormal operation or damage occurs to the battery pack due to a collision, please turn off the laptop and contact the authorized service center. There is a risk of explosion when replacing with an incorrect battery type. Please dispose of waste batteries according to the relevant instructions. FCC Statement Any Changes or modifications not expressly approved by the party responsible for compliance couldvoid the user's authority to operate the equipment. This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1)This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. Note: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee thatinterference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning theequipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures: —Reorient or relocate the receiving antenna. —Increase the separation between the equipment and receiver. —Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. — Consult the dealer or an experienced radio/TV technician for help. SAR tests are conducted using standard operating positions accepted by the FCC with the laptop tran smitting at i ts highest certified power level in all tested frequency bands, althoughthe SAR is determined at the highest certified power level, the actual SAR level of the laptop while o perating can be well below the maximum value, in general, th e closer you are to a wireless base station antenna, the lower the power output. Before a new model device is available for sale to the public, it must be tested and certified to the FCC that it does not exceed the exposure limit established by the FCC, Tests for each device are performed in positions and locations (e.g. at the ear and worn on the body)as required by the FCC. For body worn operation, this model device has been tested and meets the FCC RF exposure guidelines when used with an accessory designated for this product or when u sed with an accessory that Contains no metal. and that positions the device with a minimum of 0 cm from the body. Non-compliance with the above restrictions may result in violation of RF exposure guidelines.

U.S. AGENT LETTER OF ATTESTATION Date: 2023-12-05 FEDERAL COMMUNICATIONS COMMISSION Authorization and Evaluation Division 7435 Oakland Mills Road Columbia, MD 21046 Ref: Attestation Statements Part 2.911(d)(7) Filing FCC ID: 2AWLG-T3P116V1 E volve 3 Holdings Pty Ltd certifies that, as of the date of the filing of the application, Evolve III USA LLC is our designated U.S. agent for service of process for the above referenced FCC ID. Evolve 3 Holdings Pty Ltd accepts to maintain an agent for no less than one year after the grantee has terminated all marketing and importation or the conclusion of any Commission-related proceeding involving the equipment. Evolve III USA LLC accepts, as of the date of the filing of the application, the obligation of the designated U.S. agent for service of process for the above referenced FCC ID. Designated U.S. Agent Information: Name: Evolve III USA LLC Address: 24200 S 211th St Queen Creek, AZ 85142 United States FRN:0034404376 Tel.: (480)242-4837 Email: [email protected] Signed by (printed name): Mr Matthew W Rollins Signature: A pplicant: Evolve 3 Holdings Pty Ltd Add: PO BOX 6222, NARRAWEENA, NSW, Australia FRN: 0029625803 Tel: +61400665466 Email: [email protected] Signed by (printed name): RAY PAOLA Signature:

ATTESTATION STATEMENT Evolve 3 Holdings Pty Ltd Add: PO BOX 6222, NARRAWEENA, NSW, Australia Tel: +61400665466 Fax: +61400665466 Email: [email protected] Date: 2023-12-05 FEDE RAL COMMUNICATIONS COMMISSION Authorization and Evaluation Division 7435 Oakland Mills Road Columbia, MD 21046 R ef: Attestation Statements Part 2.911(d)(5)(i), (ii) Filing FCC ID: 2AWLG-T3P116V1 E volve 3 Holdings Pty Ltd certifies that the equipment for which authorization is sought is not “covered” equipment prohibited from receiving an equipment authorization pursuant to section 2.903 of the FCC rules. And Evolve 3 Holdings Pty Ltd certifies that, as of the date of the filing of the application, the applicant is not identified on the Covered List as an entity producing “covered” equipment. S incerely, S igned by (printed name): RAY PAOLA Title: CEO S ignature:

Declaration of Frequency Stability We Evolve 3 Holdings Pty Ltd ensure that the product (FCC ID: 2AWLG-T3P116V1) meets e-CFR Title 47 section 15.407(g) and KDB 789033 D02v02r01 frequency stability such that the emissions are maintained within the band of operation under all conditions of normal operation as specified in the user's manual. Sincere ly, Signature: Name: RAY PAOLA Position: CEO Date: 2024-1-30

QA-F R- 171-A Evolve 3 Holdings Pty Ltd Add: PO BOX 6222, NARRAWEENA, NSW, Australia Tel: +61400665466 Fax: +61400665466 Email: [email protected] FCC Confidential Authorization Date: 2023- 12-05 FEDERAL COMMUNICATIONS COMMISSIONS Authorization and Evaluation Division 7435 Oakland Mills Road Columbia, MD 21046 Subject: Confidentiality Request regarding application for certification of FCC ID: 2AWLG-T3P116V1 In accordance with Sections 0.457 and 0.459 of the Commission’s Rules, (Evolve 3 Holdings Pty Ltd) hereby requests long-term confidential treatment of information accompanying this application as outlined below: •Bloc k Diagram •Schematics • Operation Description SOFTWARE SECURITY DESCRIPTION The above materials contain proprietary and confidential information not customarily released to the public. The public disclosure of these materials provides unjustified benefits to its competitors in the market. Sin cerely, Sign ature: Prin ted Name: RAY PAOLA Title: CEO •

Evolve 3 Holdings Pty Ltd Date：2023-12-05 Product Model Number: T3P116V1 FCC ID: 2AWLG-T3P116V1 To whom it may concern, Re: Product Certification Representative Authorization Letter W e authorize QAI Laboratories Ltd. 3980 North Fraser Way, Burnaby B.C. Canada V5J 5K5 to act on our behalf on all matters concerning the above named equipment. T his shall include the following: •A pproval applications and procedures We declare that ORGANIZATION. is allowed to forward all information related to the approval project to the applied certification body and to the notification entities and to discuss any issues concerning the approval application. Any and all acts carried out byORGANIZATION. on our behalf shall have the same effect as acts of our own. By: T itle: CEO Email: [email protected] Telephone: +61400665466 On behalf of: Evolve 3 Holdings Pty Ltd

Antenna WIFI MAIN Antenna (P3707) Cable Length: 227IV: 227*0.81MM Shenzhen Yishengbang Technology Co., Ltd 4. Description Holy bond’s PCB antenna series are specially designed for WIFI (802.11 a/b/g/n) applications. Based on Holy bond’s proprietary design and processes, this PCB antenna has excellent stability and sensitivity to consistently provide high signal reception efficiency. 5. Electrical Specifications 5-1 CharacteristicsSpecificationsUnit Outline Dimensions 36.8x 7.63x 1 mm Center Frequency 2.4-2.5+5.15-5.90 GHz Bandwidth(under-10dB return loss) 130minMHz VSWR 3max 5-2 ． VSWRS11 Shenzhen Yishengbang Technology Co., Ltd 5-3.WIFI MAINAntenna Gain/Efficiency/Radiation Pattern of 3D Shenzhen Yishengbang Technology Co., Ltd 6. Antenna Dimensions (unit: mm) Shenzhen Yishengbang Technology Co., Ltd WIFI AUX Antenna (P3707) 1. Explanation of Product number : S L K - M D J - P 3 7 0 7 - R - 2 7 3 I V - G 1 2 Shenzhen Yishengbang Technology Co., Ltd 3. Description Holy bond’s PCB antenna series are specially designed for WIFI (802.11 a/b/g/n) applications. Based on Holy bond’s proprietary design and processes, this PCB antenna has excellent stability and sensitivity to consistently provide high signal reception efficiency. 4. Electrical Specifications CharacteristicsSpecificationsUnit Outline Dimensions 36.8x 7.63x1 mm Center Frequency 2.4-2.5+5.15-5.90 GHz Bandwidth(under-10dB return loss) 130minMHz VSWR 3max 5-2 VSWRS11 Shenzhen Yishengbang Technology Co., Ltd 5-3.WIFI MAINAntenna Gain/Efficiency/Radiation Pattern of 3D Shenzhen Yishengbang Technology Co., Ltd Shenzhen Yishengbang Technology Co., Ltd 6 .Antenna Dimensions (unit: mm)

China Certification ICT Co., Ltd (Dongguan) Report No.: CR231061450-EXP Page 1 of 6 EUT EXTERNAL PHOTOGRAPHS China Certification ICT Co., Ltd (Dongguan) Report No.: CR231061450-EXP Page 2 of 6 China Certification ICT Co., Ltd (Dongguan) Report No.: CR231061450-EXP Page 3 of 6 China Certification ICT Co., Ltd (Dongguan) Report No.: CR231061450-EXP Page 4 of 6 China Certification ICT Co., Ltd (Dongguan) Report No.: CR231061450-EXP Page 5 of 6 Ports Ports China Certification ICT Co., Ltd (Dongguan) Report No.: CR231061450-EXP Page 6 of 6 Adapter Adapter Label

China Certification ICT Co., Ltd (Dongguan) Report No.: CR231061450-INP Page 1 of 13 EUT INTERNAL PHOTOGRAPHS China Certification ICT Co., Ltd (Dongguan) Report No.: CR231061450-INP Page 2 of 13 China Certification ICT Co., Ltd (Dongguan) Report No.: CR231061450-INP Page 3 of 13 China Certification ICT Co., Ltd (Dongguan) Report No.: CR231061450-INP Page 4 of 13 China Certification ICT Co., Ltd (Dongguan) Report No.: CR231061450-INP Page 5 of 13 China Certification ICT Co., Ltd (Dongguan) Report No.: CR231061450-INP Page 6 of 13 WLAN/BT Module China Certification ICT Co., Ltd (Dongguan) Report No.: CR231061450-INP Page 7 of 13 WLAN/BT Module Unshielded China Certification ICT Co., Ltd (Dongguan) Report No.: CR231061450-INP Page 8 of 13 China Certification ICT Co., Ltd (Dongguan) Report No.: CR231061450-INP Page 9 of 13 Chip China Certification ICT Co., Ltd (Dongguan) Report No.: CR231061450-INP Page 10 of 13 China Certification ICT Co., Ltd (Dongguan) Report No.: CR231061450-INP Page 11 of 13 Antenna 2 (Support WLAN) (Chain 1) China Certification ICT Co., Ltd (Dongguan) Report No.: CR231061450-INP Page 12 of 13 Antenna 1 (Support BT+WLAN) (Chain 0) China Certification ICT Co., Ltd (Dongguan) Report No.: CR231061450-INP Page 13 of 13

China Certification ICT Co., Ltd (Dongguan) Report No.: CR231061450-00A Page 78 of 80 5. RF EXPOSURE EVALUATION 5.1 Applicable Standard According to §15.247(i) and §1.1310, systems operating under the provisions of this section shall be operated in a manner that ensure that the public is not exposed to radio frequency energy level in excess of the Commission’s guideline. According to KDB447498 D01 General RF Exposure Guidance v06: The 1-g and 10-g SAR test exclusion thresholds for 100 MHz to 6 GHz at test separation distances ≤ 50 mm are determined by: [(max. power of channel, including tune-up tolerance, mW)/(min. test separation distance, mm)] · [√f(GHz)] ≤ 3.0 for 1-g SAR and ≤ 7.5 for 10-g extremity SAR, where • f(GHz) is the RF channel transmit frequency in GHz • Power and distance are rounded to the nearest mW and mm before calculation • The result is rounded to one decimal place for comparison • 3.0 and 7.5 are referred to as the numeric thresholds in the step 2 below The test exclusions are applicable only when the minimum test separation distance is ≤ 50 mm and for transmission frequencies between 100 MHz and 6 GHz. When the minimum test separation distance is < 5 mm, a distance of 5 mm according to 5) in section 4.1 is applied to determine SAR test exclusion. 5.2 Measurement Result The max conducted power including tune-up tolerance is 8.0 dBm (6.31mW). [(max. power of channel, mW)/(min. test separation distance, mm)][√f(GHz)] =6.31/5*(√2.480) = 2.0< 3.0 Result: Compliant. The stand-alone SAR evaluation is not necessary.

TEST REPORT Applicant: Evolve 3 Holdings Pty Ltd Address: PO BOX 6222, NARRAWEENA, NSW, Australia FCC ID: 2AWLG-T3P116V1 Product Name: Laptop Standard(s): 47 CFR Part 15, Subpart C(15.247) ANSI C63.10-2013 KDB 558074 D01 15.247 Meas Guidance v05r02 The above device has been tested and found compliant with the requirement of the relative standards by China Certification ICT Co., Ltd (Dongguan) Report Number: CR231061450-00A Date Of Issue: 2023/12/7 Reviewed By: Calvin Chen Title: RF Engineer Approved By: Sun Zhong Title: Manager Test Laboratory: China Certification ICT Co., Ltd (Dongguan) No. 113, Pingkang Road, Dalang Town, Dongguan, Guangdong, China Tel: +86-769-82016888 China Certification ICT Co., Ltd (Dongguan) Report No.: CR231061450-00A Page 2 of 80 Test Facility The Test site used by China Certification ICT Co., Ltd (Dongguan) to collect test data is located on the No. 113, Pingkang Road, Dalang Town, Dongguan, Guangdong, China. The lab has been recognized as the FCC accredited lab under the KDB 974614 D01 and is listed in the FCC Public Access Link (PAL) database, FCC Registration No. : 442868, the FCC Designation No. : CN1314. Declarations China Certification ICT Co., Ltd (Dongguan) is not responsible for the authenticity of any test data provided by the applicant. Data included from the applicant that may affect test results are marked with a triangle symbol “▲”. Customer model name, addresses, names, trademarks etc. are not considered data. Unless otherwise stated the results shown in this test report refer only to the sample(s) tested. This report cannot be reproduced except in full, without prior written approval of the Company. This report is valid only with a valid digital signature. The digital signature may be available only under the Adobe software above version 7.0. This report may contain data that are not covered by the accreditation scope and shall be marked with an asterisk “★”. China Certification ICT Co., Ltd (Dongguan) Report No.: CR231061450-00A Page 3 of 80 CONTENTS DOCUMENT REVISION HISTORY .......................................................................................... 5 1. GENERAL INFORMATION .................................................................................................... 6 1.1 PRODUCT DESCRIPTION FOR EQUIPMENT UNDER TEST (EUT) ....................................................... 6 1.2 DESCRIPTION OF TEST CONFIGURATION ........................................................................................... 7 1.2.1 EUT Operation Condition .............................................................................................................................. 7 1.2.2 Support Equipment List and Details .............................................................................................................. 7 1.2.3 Support Cable List and Details ...................................................................................................................... 7 1.2.4 Block Diagram of Test Setup ......................................................................................................................... 8 1.3 MEASUREMENT UNCERTAINTY .......................................................................................................... 9 2. SUMMARY OF TEST RESULTS .......................................................................................... 10 3. REQUIREMENTS AND TEST PROCEDURES .................................................................. 11 3.1 AC LINE CONDUCTED EMISSIONS .................................................................................................... 11 3.1.1 Applicable Standard ..................................................................................................................................... 11 3.1.2 EUT Setup.................................................................................................................................................... 12 3.1.3 EMI Test Receiver Setup ............................................................................................................................. 12 3.1.4 Test Procedure ............................................................................................................................................. 13 3.1.5 Corrected Amplitude & Margin Calculation ................................................................................................ 13 3.2 RADIATED SPURIOUS EMISSIONS ...................................................................................................... 14 3.2.1 Applicable Standard ..................................................................................................................................... 14 3.2.2 EUT Setup.................................................................................................................................................... 14 3.2.3 EMI Test Receiver & Spectrum Analyzer Setup ......................................................................................... 15 3.2.4 Test Procedure ............................................................................................................................................. 15 3.2.5 Corrected Amplitude & Margin Calculation ................................................................................................ 16 3.3 20 DB EMISSION BANDWIDTH ........................................................................................................... 17 3.3.1 Applicable Standard ..................................................................................................................................... 17 3.3.2 EUT Setup.................................................................................................................................................... 17 3.3.3 Test Procedure .......................................................................................................................................…

Text truncated - open the document above for the full version.

China Certification ICT Co., Ltd (Dongguan) Report No.: CR231061450-00A-TSP TEST SETUP PHOTOGRAPHS Conducted Emissions Front View_ Powered from Type- C port Conducted Emissions Side View_ Powered from Type- C port China Certification ICT Co., Ltd (Dongguan) Report No.: CR231061450-00A-TSP Conducted Emissions Front View _ Powered from DC IN port Conducted Emissions Side View _ Powered from DC IN port China Certification ICT Co., Ltd (Dongguan) Report No.: CR231061450-00A-TSP Radiated Emission Below 1GHz View _ Powered from DC IN port Radiated Emission Below 1GHz View_ Powered from Type- C port China Certification ICT Co., Ltd (Dongguan) Report No.: CR231061450-00A-TSP Radiated Emission Above 1GHz View_ Powered from Type- C port