2AWNFWUCWake Up Clock

19-SEP-2020 1 / 4 A Williams-SonomaInc. AssemblyInstructions PotteryBarn–PotteryBarnTeen–PotteryBarnKids–WilliamsSonomaHome–WestElm–Rejuvenation–MarkandGraham Bunny Wake Up Clock User Manual Please read this manual carefully before operating the device and save it for further reference. Before using, please fully charge this device for 4 hours. 1. Scan the QR code to download intelliClock App. IntelliClock AppGoogle playApp Store 2.Turn on the Bluetooth of your device and enter the IntelliClockApp for pairing. 3.Select the“Wake UP Clock” and connect. 4.Keep the alarm clock display screen light ON when pairing. 5.Use the controls on your connected device to set the 3 alarms, and adjust volume. 6.Set up other functions by Setting in App. 19-SEP-2020 2 / 4 A Williams-SonomaInc. AssemblyInstructions PotteryBarn–PotteryBarnTeen–PotteryBarnKids–WilliamsSonomaHome–WestElm–Rejuvenation–MarkandGraham Night Lighting Two ways of switching night light and controlling night light time: 1) By App to set on/off the night light, and set the lighting time from 1 to maximum 60 minutes. 2) By short press the bunny earto switch on/off the night light at any time, and the light will go off automatically 30 minutes later. Brightness can be adjusted by long pressing the bunny ear. Screen Display Two display modes:Time or Time and Date, please enter the intelliClockApp to set the display mode. Adjustable brightness:App can set 4 levels of the brightness of screen display, and the brightness will be dimming automatically from 8 PM to 6 AM, when it is set on by App. Voice&Touch Control:The display screen can be activated by making a sound or by touching the bunny ear. Front AMIn 12 hours system, midnight to noon. PMIn 12 hours system, noon to midnight. Audio Mode If the icon is always on, it means the audio alarm time is set. When the audio alarm goes off, the icon flashes. Power Indication If the icon is always on, it means the alarm clock is charging; once fully charged, the icon will disappear.A flashing charging indicator light means the alarm clock is low on battery. Night Light TouchSwitch Audio Mode Current Time Display 12h format Night Light Touch Switch Vibration Mode Charging Indication Temperature Indication Mode Toggle Button Audio Mode: When the alarm rings,it will play music. Silent Mode: When the alarm rings,it will not play a sound, or vibrate. Vibration Mode: Make the alarm vibrate. /Adjust Alarm Volume View The Alarm Time Short press the button to see the alarm time you have set.You can set up 3 desired alarm time on the IntelliClock App. Function Button Long press the function button on the clock to turn off current alarm, when checking the alarm time you have set. Press both buttons together for 3 seconds to switch the clock off. Silent Mode Vibration Mode Audio Mode VOL- ModeToggle Button Alarm Time Displaying VOL+ Function Reset Button Charging Port Voice Control Sensor Back 19-SEP-2020 3 / 4 A Williams-SonomaInc. AssemblyInstructions PotteryBarn–PotteryBarnTeen–PotteryBarnKids–WilliamsSonomaHome–WestElm–Rejuvenation–MarkandGraham Charging Method Insert the cable included into the charging port on the back of the bunny alarm clock, and then connect the USB end with a powered USB source, such as laptop, computer or power bank,etc. There is no “turn on” button for the clock, once charging, the clock turns on. Energy Saving (not charging status) 1. The screen will go off automatically if more than 30 seconds with no operation. 2. The intelliClockApp is automatically disconnected if more than 3 minutes no operation, meanwhile the alarm clock screen will go off together. You need to re-connect for any App operation. Setting the Alarm 1. Select the IntelliClockApp on your smart phone to set your alarm times. 2. There are 6 built in tones that can be selected for each alarm time: wake/nap/sleep. 3. Quickly press any button on the clock or touch bunny ears to turn off the alarm. If no buttons are touched, the alarm will continuously ring for 2 minutes and automatically shut off. 4. For all alarm modes: default volume is NOT set as NO volume in the IntelliClock App, and the toggle button on the back of the clock is set to the Audio Mode, so the alarm will be audible. Wake Mode: 10 Minutes BEFORE it is time to get out of bed, a warm white light fades in and gradually brightens. The light then changes to green and music plays for 2 minutes. The green light stays on for a total of 20 minutes, signaling that your child may get out of bed. Nap Mode: 10 minutes BEFORE it is okay to get out of bed from nap time, a warm white light pulses. When it is OK to get out of bed, the light changes to green and music will play Sleep Mode: When it is time to go to bed at night, music or white noise plays for two minutes (unless volume is switched off in App or manual switch on back of the clock). A warm white light pulses, indicating it`s time to sleep. When sound turns off, a red light stays on for 20 minutes indicating to stay in bed. 19-SEP-2020 4 / 4 © 2020 Williams-Sonoma, Inc.A Williams-SonomaInc. AssemblyInstructions PotteryBarn–PotteryBarnTeen–PotteryBarnKids–WilliamsSonomaHome–WestElm–Rejuvenation–MarkandGraham NOTE: 1. Please fully charge the alarm clock prior to first use. 2. Please charge the alarm clock while the battery is low to prolong life of the batteries. 3. Please turn off the power once charging is completed. 4. If the clock is not used for long periods of time, please fully charge to protect the life of the battery. 5. To reduce the risk of fire, the alarm clock should never be exposed to rain or moisture and objects filled with liquids. 6. Keep this alarm clock away from direct sunlight, open flames or heat. 7. Make sure that you always have easy access to the power cable plug to disconnect the alarm clock from power. 8. Please do not place this alarm clock on uneven surfaces. 9. Never attempt to remove the casing of this clock. PRODUCT PARAMETER: Item: Bunny Wake Up Clock Material: ABS + PC Wei…

Text truncated - open the document above for the full version.

SCS-F018: Project and Product Certification Representative Authorization Letter Page 1 of 3 Rev 7.0 775 Montague Expressway Milpitas, CA 95035 Tel: 408-526-1188 Fax: 408-526-1088 Email: [email protected] Website: https://www.cps.bureauveritas.com/ Project and Product Certification Representative Authorization Letter Reason for Amendment (current / obsolete) Revision History Approved Date From To Initial Release (obsolete) 1.0 1.0 Nov-14-2006 Revised wording (obsolete) 1.0 2.0 Sept–25-2007 Updated company template (obsolete) 2.0 3.0 Jan-31-2012 Updated letter information (obsolete) 3.0 4.0 May-23-2014 Added FCC ID field (obsolete) 4.0 5.0 Sep-16-2014 Updated company name & logo (current) 5.0 6.0 Jun-27-2018 Updated References and Contact info 6.0 7.0 Aug-30-202 SCS-F018: Project and Product Certification Representative Authorization Letter Page 2 of 3 Rev 7.0 Shenzhen VITAL Trading Co., LTD. (2020-10-26) To: BVCPS, INC. 775 Montague Expressway, Milpitas, CA 95035 USA Dear Sir/Madam, Re: Product Certification Representative Authorization Letter We, _____ Shenzhen VITAL Trading Co., LTD. _____ hereby authorize Bureau Veritas Consumer Product Services, Inc. to act as a Certification Body for certifying for the following project(s): FCC ID: 2AWNFWUC Product Description: Wake Up Clock Model: 8907223 Sincerely, Ace Chan Shenzhen VITAL Trading Co., LTD. Rm.2705, Block A, Harbin Mansion, No. 7045, Beihuan Rd., Lianhua Street, Futian, Shenzhen, China SCS-F018: Project and Product Certification Representative Authorization Letter Page 3 of 3 Rev 7.0 Shenzhen VITAL Trading Co., LTD. (2020-10-26) To: BVCPS, INC. 775 Montague Expressway, Milpitas, CA 95035 USA Dear Sir/Madam, Re: Project and Product Certification Representative Authorization Letter We, _____ Shenzhen VITAL Trading Co., LTD. _____ hereby authorize Bureau Veritas Consumer Product Services, Inc. to act as a Certification Body for certifying for the following project(s): FCC ID: 2AWNFWUC Product Description: Wake Up Clock Model: 8907223 We affirm that between Bureau Veritas Consumer Product Services, Inc. and ____ Shenzhen VITAL Trading Co., LTD. ___, any difference in understanding, including test plan, measurement methods, applicable standards and relevant procedures and processes have been resolved prior to commencement of testing activities. Sincerely, Ace Chan Shenzhen VITAL Trading Co., LTD. Rm.2705, Block A, Harbin Mansion, No. 7045, Beihuan Rd., Lianhua Street, Futian, Shenzhen, China

SCS-F019: Confidentiality Request Letter Page 1 of 2 Rev 7.0 775 Montague Expressway Milpitas, CA 95035 Tel: 408-526-1188 Fax: 408-526-1088 Email: [email protected] Website: https://www.cps.bureauveritas.com/ Confidentiality Request Letter Reason for Amendment (current / obsolete) Revision History Approved Date From To Initial Release (obsolete) 1.0 1.0 Nov-14-2006 Adding CFR 2.459 (obsolete) 1.0 2.0 August – 11 - 2008 Updated company template & Added text box (obsolete) 2.0 3.0 Jan-31-2012 Added IC confidentiality letter form (obsolete) 3.0 4.0 March-26-2015 Corrections to STC form. Added reference to KDB (obsolete) 4.0 5.0 Nov-19-2015 Updated company logo (current) 5.0 6.0 Jun-26-2019 Updated References and Contact Info 6.0 7.0 Aug-30-2020 SCS-F019: Confidentiality Request Letter Page 2 of 2 Rev 7.0 Shenzhen VITAL Trading Co., LTD. (2020-10-26) To: Federal Communications Commission Authorization and Evaluation Division 7435 Oakland Mills Road Columbia, MD 21046-1609 Cc: Bureau Veritas Consumer Products Services Inc. 775 Montague Expressway Milpitas, CA 95035 Subject: Confidentiality Request for FCC ID: 2AWNFWUC Pursuant to CFR 47 sections 0.457 and 0.459, we respectfully request permanent confidential treatment of the following Exhibits accompanying this application be held confidential: Type of Confidentiality Requested Exhibit Short Term Permanent Block Diagram Short Term External Photos Short Term Permanent i Internal Photos Short Term Permanent Operational Description/ Theory of Operation Short Term Permanent Parts List Short Term Permanent Tune-Up Procedure Short Term Permanent Schematics Short Term Test Setup Photos Short Term Permanent i User’s Manual The above materials contain trade secrets and proprietary information not customarily released to the public. The public disclosure of these materials may be harmful to the applicant and provide unjustified benefits to its competitors. Permanent Confidentiality: The applicant requests the exhibits listed above as permanently confidential be permanently withheld from public review due to materials that contain trade secrets and proprietary information not customarily released to the public. Short-Term Confidentiality: To avoid premature release of sensitive information prior to marketing or release of the product to the public, the applicant requests the following documents contained in this certification application be temporarily withheld from public disclosure for an initial period of 45 or 180 days; or for a specified date of not to exceed 180 days from the Grant Date The applicant understands that disclosure of this application and all accompanying documentation will not be made before the date of the Grant for this application. Sincerely, Ace Chan Shenzhen VITAL Trading Co., LTD. Rm.2705, Block A, Harbin Mansion, No. 7045, Beihuan Rd., Lianhua Street, Futian, Shenzhen, China i Permanent confidentiality may be requested in accordance with FCC KDB 726920

1 3.7x3.7cm Label Location

Antenna

RF EXPOSURE EVALUATION EUT Specification EUT Wake Up Clock Model Number 8907223 FCC ID 2AWNFWUC Antenna gain (Max) -0.58dBi Operation Frequency 2402-2480MHz Input Rating DC 5V/1000mA Classification Per Stipulated Test Standard §15.247(i), §2.1093 Kind of Device: Bluetooth Ver.5.0 Modulation GFSK, π/4-DQPSK Max. output power 2.88dBm(0.0019W) Test Requirement: According to §15.247(i) and §1.1307(b)(1), systems operating under the provisions of this section shall be operated in a manner that ensures that the public is not exposed to radio frequency energy level in excess of the Commission’s guidelines. Routine SAR evaluation refers to that specifically required by §2.1093, using measurements or computer simulation. When routine SAR evaluation is not required, portable transmitters with output power greater than the applicable low threshold require SAR evaluation to quality for TCB approval. One antenna is available for the EUT. The minimum separation distance is 5mm. BT DSS: According to KDB 447498, no stand-alone required for BT antenna, and no simultaneous SAR measurement is required. Signature: Alan He Date: 2020-10-26 Transmit Frequency (MHz) Mode Measured Power (dBm) Tune up Power (dBm) Max tune up power(dBm) Calculation Result 1-g SAR 2402 GFSK 0.93 1±1 2 0.384050 3 2441 GFSK -0.12 0±1 1 0.304037 3 2480 GFSK -0.62 -1±1 0 0.273071 3 2402 Π/4-DQ PSK 1.24 1±1 2 0.412257 3 2441 Π/4-DQ PSK 0.29 0±1 1 0.334035 3 2480 Π/4-DQ PSK -0.30 0±1 1 0.293858 3

Report No.: EA20100082F01001 1 of 62 TRF No. FCC Part 15.247/A Ver.1.0 ELECTROMAGNETIC EMISSIONS COMPLIANCE REPORT INTENTIONAL RADIATOR CERTIFICATION TO FCC PART 15 SUBPART C REQUIREMENT OF Wake Up Clock Model No.: 8907223 Trademark: N/A FCC ID: 2AWNFWUC Report No.: EA20100082F01001 Issue Date: Oct. 20, 2020 Prepared for Shenzhen VITAL Trading Co., LTD Rm.2705, Block A, Harbin Mansion, No. 7045, Beihuan Rd., Lianhua Street, Futian, Shenzhen, China Prepared by Dong Guan Anci Electronic Technology Co., Ltd. 1-2 Floor, Building A, No.11, Headquarters 2 Road, Songshan, Lake Hi-tech Industrial Development Zone, Dongguan City, Guangdong Pr., China. This report shall not be reproduced, except in full, without the written approval of Dong Guan Anci Electronic Technology Co., Ltd. Report No.: EA20100082F01001 2 of 62 TRF No.: FCC 15.209/A Rev. 1.0 VERIFICATION OF COMPLIANCE Applicant: Shenzhen VITAL Trading Co., LTD. Rm.2705, Block A, Harbin Mansion, No. 7045, Beihuan Rd., Lianhua Street, Futian, Shenzhen, China Manufacturer: Same as applicant Product Description: Wake Up Clock Trade Mark: N/A Model Number: 8907223 Te s t Model Number: 8907223 We hereby certify that: The above equipment was tested by Dong Guan Anci Electronic Technology Co., Ltd.The test data, data evaluation, test procedures, and equipment configurations shown in this report were made in accordance with the procedures given in ANSI C63.10-2013 and the energy emitted by the sample EUT tested as described in this report is in compliance with conducted and radiated emission limits of FCC Rules Part 15.247(2020). Date of Test : Oct. 15, 2020 to Oct. 20, 2020 Prepared by : Tomas Yang/Supervisor Reviewer & Authorized Signer : Alan He/Manager Report No.: EA20100082F01001 3 of 62 TRF No.: FCC 15.209/A Rev. 1.0 Modified Information Version Summary Revision Date Report No. Ver.1.0 Original Report / EA20100082F01001 Report No.: EA20100082F01001 4 of 62 TRF No.: FCC 15.209/A Rev. 1.0 Table of Contents 1. GENERAL INFORMATION ......................................................................................................... 6 1.1 PRODUCT DESCRIPTION ............................................................................................................................. 6 1.2 TEST METHODOLOGY ................................................................................................................................. 6 1.3 TEST FACILITY ............................................................................................................................................. 7 2. SYSTEM TEST CONFIGURATION............................................................................................... 8 2.1EUT CONFIGURATION ................................................................................................................................. 8 2.2 EUT EXERCISE..................................................................................................................................... 8 2.3 T EST PROCEDURE..................................................................................................................................... 8 2.4C ONFIGURATION OF TESTED SYSTEM ........................................................................................................ 9 3. SUMMARY OF TEST RESULTS ................................................................................................. 10 4. DESCRIPTION OF TEST MODES .............................................................................................. 11 5. TEST SYSTEM UNCERTAINTY .................................................................................................. 12 6. CONDUCTED EMISSIONS TEST ............................................................................................... 13 6.1MEASUREMENT PROCEDURE: ................................................................................................................... 13 6.2 TEST SET-UP (BLOCK DIAGRAM OF CONFIGURATION) ......................................................................... 13 6.3M EASUREMENT EQUIPMENT USED: .......................................................................................................... 13 6.4 MEASUREMENT RESULT: .......................................................................................................................... 14 6.5 CONDUCTED MEASUREMENT PHOTOS: ................................................................................................... 16 7. RADIATED EMISSION TEST ....................................................................................................... 17 7.1MEASUREMENT PROCEDURE .................................................................................................................... 17 7.2T EST SET-UP (BLOCK DIAGRAM OF CONFIGURATION) .......................................................................... 19 7.3 MEASUREMENT EQUIPMENT USED: ......................................................................................................... 20 7..4 RADIATED EMISSION LIMIT ...................................................................................................................... 21 7.5 MEASUREMENT RESULT ......................................................................................................................... 22 7.5 RADIATED MEASUREMENT PHOTOS: ....................................................................................................... 29 8. CHANNEL SEPARATION TEST ................................................................................................. 30 8.1MEASUREMENT PROCEDURE .................................................................................................................... 30 8.2T EST SET-UP (BLOCK DIAGRAM OF CONFIGURATION) .......................................................................... 30 8.3 MEASUREMENT EQUIPMENT USED: ...............................................................…

Text truncated - open the document above for the full version.