2AWRC-BSP3300Smartphone holder and charger

V01222025 Certification for Designating a U.S. Agent for Service of Process In compliance with section 2.911(d)(7), all applicants are required to appoint a U.S.-based contact to serve as their agent for service of process. This requirement applies to both domestic and foreign applicants. Entities located within the United States are permitted to designate themselves as their own agent for this purpose. Regardless of the applicant’s status, the designation of the U.S. agent must be included as an attachment to the equipment authorization application. The written certification must adhere to the following requirements: 1. It must bear the signatures of both the applicant and the designated U.S. agent for service of process, provided the agent is a separate entity from the applicant. 2. It must clearly state the applicant’s consent and confirm the agent’s obligation to accept service of process on the applicant’s behalf. 3. It must include a physical address and email address located in the United States for the designated agent. 4. It must acknowledge that the applicant will maintain the designated agent’s role for at least one year after ceasing all marketing and importation activities or upon the conclusion of any FCC-related proceedings involving the equipment. Key Details Regarding the U.S. Agent for Service of Process: ● The agent cannot be a Telecommunication Certification Body (TCB) or have affiliations with one (e.g., the agent cannot work for or be owned by a TCB or a related company). ● The agent must not be an FCC-recognized testing laboratory or have affiliations with one (e.g., the agent cannot work for or be owned by a test lab or a related company). ● The agent may be an individual or a company entity. ● The designated agent entity must have a physical U.S. address and phone number. ● It is recommended that the agent possess a Federal Registration Number (FRN), and including the FRN in the agent letter is considered best practice. ● The agent designation letter may be general for the grantee and is not required to be FCC ID-specific. If there is a change in the U.S. Agent for Service of Process for devices that are still being marketed or have ceased marketing for less than one year, the TCB must request the FCC to place the application in Audit Mode for every relevant TC Number. The updated agent letter will then need to supersede the previous version. Important Note: The role of the U.S. Agent for Service of Process should not be confused with the authorized agent responsible for signing the FCC Form 731, cover letters included in the application, or the agent who interacts directly with the TCB. Note for Attestation Letter: Print the attestation letter onto the manufacturer's corporate letterhead prior to submission. V01222025 Federal Communications Commission Authorization and Evaluation Division 7435 Oakland Mills Road Columbia, MD 21046 United States Date: 09/10/2025 Ref: Attestation Statement Part 2.911(d)(7) Filing FCC ID:2AWRC-BSP3300 Robert Bosch GmbH certifies that, as of the dates of this application, Americas Compliance Consulting LLC dba iCertifi “iCertifi” is our designated U.S. agent for service of process for the above referenced FCC ID. Robert Bosch GmbH accepts to maintain an agent for no less than one year after the grantee has terminated all marketing and importation or the conclusion of any commission-related proceeding involving the equipment. iCertifi accepts, as of the date of the filing of the application, the obligation of the designated U.S. agent for service process for the above referenced FCC ID. Designated U.S. Agent Information: Name Americas Compliance consulting, LLC dba iCertifi FCC FRN 0033399411 Address 2445 NE Division Street, Suite 202 Bend, OR 97703 United States Contact Person Paul Preston Telephone +1-866-885-4575 Email [email protected] Sincerely, Robert Bosch GmbH Americas Compliance Consulting LLC dba iCertifi FRN 0029704053 0033399411 Contact name Sarcevic Dean Paul Preston Title Director President/CEO Signature Signature

eBike Systems Registered Office: Stuttgart, Registration Court: Amtsgericht Stuttgart, HRB 14000; Chairman of the Supervisory Board: Prof. Dr. Stefan Asenkerschbaumer; Managing Directors: Dr. Stefan Hartung, Dr. Christian Fischer, Dr. Markus Forschner, Stefan Grosch, Dr. Markus Heyn, Dr. Frank Meyer, Katja von Raven, Dr. Tanja Rückert Robert Bosch GmbH Postfach 13 42 72703 Reutlingen Germany Visitor: Markwiesenstraße 58 72770 Kusterdingen Phone 07121 35-0 www.bosch.com Dr. Christoph Gahn (EB-CD/GP) Tel: +49 151 14028612 [email protected] Attestation Statements Not Covered Entity and Not Covered Equipment August 22, 2025 Ref: Attestation Statements Part 2.911(d)(5)(i) and Part 2.911(d)(5)(ii) Filing Re. KDB 986446 D01 FCC ID: 2AWRC-BSP3300 Dear Sir or Madam, Robert Bosch GmbH, Markwiesenstrasse 58, Reutlingen, Baden- Wuerttemberg, 72770, Germany (“the applicant”) certifies that: a) as of the date of the filing of the application, the applicant is not identified on the Covered List (as a specifically named entity or any of its subsidiaries or affiliates) as an entity producing “covered” equipment. b) the equipment for which authorization is sought is not “covered” equipment prohibited from receiving an equipment authorization pursuant to section § 2.903 of the FCC rules. We further attest that the equipment for which authorization is sought does not contain integrated Kaspersky cybersecurity and/or anti-virus software produced by Kaspersky Lab Inc. or any of its successors and assignees. If you have any questions, please contact us. To: Federal Communications Commission Authorization and Evaluation Division 7435 Oakland Mills Road, Columbia, MD 21046, USA eBike Systems August 22, 2025 Page 2 of 2 Sincerely, ___________________________ Signature Dr. Christoph Gahn (EB-CD/GP) Senior Vice President Business Unit Connected Devices Tel: +49 151 14028612 e-mail: [email protected] _______________________________ Signature Sarcevic Dean (EB-CD/PJM) Director - Project Management Business Unit Connected Devices Tel: +49 173 8535690 e-mail: [email protected]

Sitz: Stuttgart, Registergericht: Amtsgericht Stuttgart, HRB 14000; Aufsichtsratsvorsitzender: Prof. Dr. Stefan Asenkerschbaumer; Geschäftsführung: Dr. Stefan Hartung, Dr. Christian Fischer, Filiz Albrecht, Dr. Markus Forschner, Dr. Markus Heyn, Dr. Tanja Rückert Robert Bosch GmbH Postfach 13 42 72703 Reutlingen Germany Besucher: Markwiesenstrasse 58 72770 Reutlingen Tel +49 7121 35-31108 www.bosch.com eBike Systems To: TUV SUD America Inc. 10 Centennial Drive Peabody, MA 01960, USA 22 August 2025 Ref: Agent letter for FCC ID: 2AWRC-BSP3300 We, (Robert Bosch GmbH, Markwiesenstrasse 58, 72770 Reutlingen, Germany), hereby authorize Marlene Sealey of TUV SUD America, 10040 Mesa Rim Road, San Diego, CA, 92121 to act as our agent in all matters relating to applications for equipment authorization, including the signing of all documents relating to these matters. Yours sincerely, _____________________ Signature Dr. Christoph Gahn (EB-CD/GP) Senior Vice President Business Unit Connected Devices Tel: +49 151 14028612 e-mail: [email protected] _______________________ Signature Sarcevic Dean (EB-CD/PJM) Director - Project Management Business Unit Connected Devices Tel: +49 173 8535690 e-mail: [email protected]

1 Sitz: Stuttgart, Registergericht: Amtsgericht Stuttgart, HRB 14000; Aufsichtsratsvorsitzender: Prof. Dr. Stefan Asenkerschbaumer; Geschäftsführung: Dr. Stefan Hartung, Dr. Christian Fischer, Filiz Albrecht, Dr. Markus Forschner, Dr. Markus Heyn, Dr. Tanja Rückert Robert Bosch GmbH Postfach 13 42 72703 Reutlingen Germany Besucher: Markwiesenstrasse 58 72770 Reutlingen Tel +49 7121 35-31108 www.bosch.com eBike Systems CONFIDENTIALITY REQUEST for Certification Service in USA Federal Communication Commission Equipment Authorization Division, Application Processing Branch 7435 Oakland Mills Road Columbia, MD 21048 22 August 2025 Ref: Confidentiality request for FCC ID: 2AWRC-BSP3300 To whom it may concern: Pursuant to paragraphs §0.457(d)(1)(ii) and §0.459 of the Commission’s Rules (47 C.F.R.) and Section §552 (b)(4) of the Freedom of Information Act, Robert Bosch GmbH hereby requests that a part of the subject FCC application be held confidential to avoid release of sensitive information of the product to the public. For the product stated above, we request that the following information be withheld from public disclose: Type of Confidentiality Requested Exhibit Short Term Permanent Block Diagrams Short Term External Photos Short Term Internal Photos Short Term Permanent Operation Description Short Term Permanent Parts List & Placement/BOM Short Term Permanent Tune-Up Procedure Short Term Permanent Schematics Short Term Test Setup Photos Short Term User’s Manual Short Term Permanent SDR software and security information Permanent Confidentiality: The above materials contain trade secrets and proprietary information not customarily released to the public. The public disclosure of these matters might be harmful to us and provide unjustified benefits to our competitors. Short-Term Confidentiality: We hereby request short-term confidentiality for the product stated above to avoid premature release of sensitive information prior to marketing or release of the product to the public. Release date of short-term confidentiality is: 45 days from grant date marked Sitz: Stuttgart, Registergericht: Amtsgericht Stuttgart, HRB 14000; Aufsichtsratsvorsitzender: Prof. Dr. Stefan Asenkerschbaumer; Geschäftsführung: Dr. Stefan Hartung, 2 Dr. Christian Fischer, Filiz Albrecht, Dr. Markus Forschner, Dr. Markus Heyn, Dr. Tanja Rückert eBike Systems Robert Bosch GmbH Postfach 13 42 72703 Reutlingen Germany Besucher: Markwiesenstrasse 58 72770 Reutlingen Tel +49 7121 35-31108 www.bosch.com 90 days from grant date marked 135 days from grant date marked 180 days from grant date marked Specific date: If you have any questions, please feel free to contact us at the address shown below. Yours sincerely, ____________________ Signature Name: Dr. Christoph Gahn (EB-CD/GP) Title: Senior Vice President Company: Robert Bosch GmbH Markwiesenstrasse 58 72770 Reutlingen, Germany Tel: +49 151 14028612 Fax: +49 7121 35-0 E-mail: [email protected] ___________________________ Signature Name: Sarcevic Dean (EB-CD/PJM) Title: Director - Project Management Company: Robert Bosch GmbH Markwiesenstrasse 58 72770 Reutlingen, Germany Tel: +49 173 8535690 E-Mail: [email protected]

Robert Bosch GmbH Wireless charger approval FCC ID: 2AWRC-BSP3300 Data: 2025-11-26 There’s a wireless charger that would like to have your authorization as an inductive wireless power transfer applications approval. The specific product as below, wireless quick charger, with its designed features and specified description, meets special requirement for KDB 680106 D01 v03 section 5 (b) requirements. Company: Robert Bosch GmbH Product Name: Smartphone holder and charger Model Number: BSP3300 FCC ID: 2AWRC-BSP3300 KDB 680106 D01 v03 section 5 (b) requirement: Product Technical Specification: Result: Power transfer frequency is less than 1 MHz. 111.0KHz and 150KHz Complied Output power from each primary coil is less than or equal to 15 watts Max 5W Complied The transfer system includes only single primary and secondary coils. This includes charging systems that may have multiple primary coils and clients that are able to detect and allow coupling only between individual pairs of coils Only single primary Complied Client device is placed directly in contact with the transmitter Placed directly Complied Mobile exposure conditions only (portable exposure conditions are not covered by this exclusion). Mobile exposure conditions only Complied The aggregate H-field strengths at 15 cm surrounding the device and 20 cm above the top surface from all simultaneous transmitting coils are demonstrated to be less than 50% of the MPE limit. the detailed data please refer to RF exposure report Complied Best Regards Company Officer: Sercevic Dean Title: Director Email: [email protected]

Ind. Change/Aend. YYYYMMDD Drawn/Gez. Checked/Gepr. Releas./Freig. BWN Resp. dept./Verantw. Abt. Add. info./Zus. Info. Size/Gst. Missed details/Fehlende Angaben Treatment/ Behandlung Mat./Stoff From/Aus Repl. for Doc.type Sheet/Bl. Ind. DP/TD Repl. by Format MNR Scale/M.stab Mat.meets/Stoffe s Crit. P. Lang./Spr. Wght./Gew. Syst. 5 4 7 8 11 10 © Robert Bosch GmbH. Alle Rechte vorbehalten, auch bzgl. jeder Verfuegung, Verwertung, Reproduktion, Bearbeitung,Weitergabe sowie fuer den Fall von Schutzrechtsanmeldungen. © Robert Bosch GmbH. All rights reserved, also regarding any disposal, exploitation, reproduction, editing, distribution, as well as in the event of applications for industrial property rights. 9 12 13 F E D C G H J 6 2 13 15 14 16 17 K L M B A G H J K L F E D C B 5 4 7 8 6 2 3 11 10 9 12 13 15 14 16 3007 17 1 A M Contact Pin Height0
# 0.15 130.2
# 0.5 64.5 34.3 (gap beteen BH and USB Cap) 0.2
#0.1 (Step between TC and BH) 0 +0.35 -0.10 all around (Gap Size TC and BH) 0.13 +0.2 -0.1 (gap between BC and BH) 0.27 +0.10 -0.05 (Gap between Front Clamp and BH) 0 +0.3 0 02 DFM20250115BHD1SZH218EB-CD/ENG-SHZ 01 ID_UPDATE20241029BHD1SZH218EB-CD/ENG-SHZ - INITIAL20240712CAJ4OVR218EB-CD/ENG -- -- -- en/de-- Assembly Drawing Montagezeichnung 1/2 1:1DRWEB13100019000 02A1 N 2580-1PE -- NOTES: 1. THE COMPONENT MUST BE COMPLIANT WITH THE BOSCH QUALITY REQUIREMENTS. 2. THE COMPONENT SPECIFIC QUALITY INFORMATION IS SPECIFIED IN BOSCH DOCUMENT EBXXXXXXXX. 3. FOR A COMPLETE SPECIFICATION, THE DRAWING MUST BE ACCOMPANIED BY A 3D CAD-FILE WITH PART VERSION NUMBER AS STATED IN THE TITLE BLOCK. 4. THE COMPONENT SHALL BE CLEAN AND FREE OF ALL FOREIGN MATTER. C-SAMPLE C B-B D E A B A (2:1) B(2:1) C(3:1) D(2:1) E(3:1) 3000Create 100 101 200 400 300 301 302 Ind. Change/Aend. YYYYMMDD Drawn/Gez. Checked/Gepr. Releas./Freig. BWN Resp. dept./Verantw. Abt. Add. info./Zus. Info. Size/Gst. Missed details/Fehlende Angaben Treatment/ Behandlung Mat./Stoff From/Aus Repl. for Doc.type Sheet/Bl. Ind. DP/TD Repl. by Format MNR Scale/M.stab Mat.meets/Stoffe s Crit. P. Lang./Spr. Wght./Gew. Syst. 5 4 7 8 11 10 © Robert Bosch GmbH. Alle Rechte vorbehalten, auch bzgl. jeder Verfuegung, Verwertung, Reproduktion, Bearbeitung,Weitergabe sowie fuer den Fall von Schutzrechtsanmeldungen. © Robert Bosch GmbH. All rights reserved, also regarding any disposal, exploitation, reproduction, editing, distribution, as well as in the event of applications for industrial property rights. 9 12 13 F E D C G H J 6 2 13 15 14 16 17 K L M B A G H J K L F E D C B 5 4 7 8 6 2 3 11 10 9 12 13 15 14 16 3007 17 1 A M 23EB132000JTFPC1 22EB132000JSUSB-PCBA1 21EB132000JPMain-PCBA1 20EB132000CJE-ring_2x0-42 19EB132000CHO-RING_0-5x2-12 18EB132000C6BSP3300_Metal-tube2 17EB132000C7Fixation-Pin_1-6x5-92 16EB132000C1BSP3300_Front-clamp1 15EB132000C8Screw_M3x11-72 14EB132000C5CLAMPING-SPRING2 13EB132000CGContact-pin_3-6x2-552 12EB132000CASPRING_3x8-62 11EB1320004NRelease-pin_2-5x301 10EB1390000HScrew_M1-4x31 9EB132000C4BSP3300_Bottom-cover-right1 8EB132000C3BSP3300_Bottom-cover-left1 7EB132000CEBSP3300_USB-cap1 6EB132000C9BSP3300_Lock-lever1 5EB132000BYBSP3300_Back-Clamp1 4EB132000CKScrew_M1-4_42 3EB132000CBLock-pin_1-5x441 2EB132000CDScrew_M1-4x2-83 1EB132000C2BSP3300_Top-cover1 ITEMPNDESCRIPTIONQUANTITY ASSEMBLY PARTSDESCRIPTIONASSEMBLY METHOD/PARAMETERS 5+[18+14+17]+[8 & 9] BOTTOM HOUSING + METAL TUBE ASSEMBLY + BOTTOM COVER LEFT&RIGHT ASSEMBLY METHOD: USW MINIMUM USW PUSH OUT FORCE: 200N 5+[21+22+23]+[2 & 4] BOTTOM HOUSING ASSEMBLY + MAIN PCBA & USB PCBA + SCREWS ASSEMBLY METHOD: SCREWING MAIN PCBA SCREWING TORQUE: 1.2±0.1 Kgf.cm USB PCBA SCREWING TORQUE: 1.0
#0.1 Kgf.cm 5+1 BOTTOM HOUSING ASSEMBLY + TOP COVER JOINING METHOD: GLUING GLUE TYPE: TEROSON MS 939 MINIMUM PULL OUT FORCE: 160N 5+16+15 BOTTOM HOUSING ASSEMBLY + FRONT CLAMP + SCREWS ASSEMBLY METHOD: SCREWING SCREWING TORQUE: 2.5
#0.1Kgf.cm 5+7+10 BOTTOM HOUSING ASSEMBLY + USB CAP + SCREW ASSEMBLY METHOD: SCREWING SCREWING TORQUE: 0.9
#0.05Kgf.cm 02 DFM20250115BHD1SZH218EB-CD/ENG-SHZ 01 ID_UPDATE20241029BHD1SZH218EB-CD/ENG-SHZ - INITIAL20240712CAJ4OVR218EB-CD/ENG -- -- -- en/de-- Assembly Drawing Montagezeichnung 2/2 1:1DRWEB13100019000 02A1 N 2580-1PE -- 1 9 2 3 5 6 7 8 11 10 12 13 14 15 16 17 18 19 20 4 ASSEMBLY PROCESS PROPOSAL 21 22 23 3000Create

Report Number: 6895025119101A EMC_SZ_FR_76.00 FCC Release 2023-12-01 TÜV SÜD Certification and Testing (China) Co., Ltd. Shenzhen Branch Building 12 & 13, Zhiheng Wisdomland Business Park, Guankou Erlu, Nantou, Nanshan District, Shenzhen, Guangdong, China Tel. +86 755 8828 6998, Fax: +86 755 8828 5299 Page 1 of 7 RF Exposure Report Report Number : 6895025119101A Date of Issue: 2025-09-10 Model/HVIN : BSP3300 Product Type : Smartphone holder and charger Applicant : Robert Bosch GmbH Address : Markwiesenstrasse 58, 72770, Reutlingen, Germany Manufacturer : Robert Bosch GmbH Address : Markwiesenstrasse 58, 72770, Reutlingen, Germany Factory : Xiamen Intretech Inc. Address : No. 100 Dongfu West Road, Haicang District, 361027 Xiamen, PEOPLE'S REPUBLIC OF CHINA Test Result : ◼ Positive  Negative Total pages including Appendices : 7 Any use for advertising purposes must be granted in writing. This technical report may only be quoted in full. This report is the result of a single examination of the object in question and is not generally applicable evaluation of the quality of other products in regular production. For further details, please see testing and certification regulation chapter A-3.4. Report Number: 6895025119101A EMC_SZ_FR_76.00 FCC Release 2023-12-01 TÜV SÜD Certification and Testing (China) Co., Ltd. Shenzhen Branch Building 12 & 13, Zhiheng Wisdomland Business Park, Guankou Erlu, Nantou, Nanshan District, Shenzhen, Guangdong, China Tel. +86 755 8828 6998, Fax: +86 755 8828 5299 Page 2 of 7 1. Product information Product Type: Smartphone holder and charger Model No.: BSP3300 FCC ID: 2AWRC-BSP3300 Rating: Input: 5VDC, 1.5A (powered by Bosch Display Socket – BDS) Output: 5VDC, 1.5A (USB Type-C port), 5W (wireless output) RF Transmission Frequency: 111-150kHz Antenna Type: Integrated coil antenna Description of the EUT: The Equipment Under Test (EUT) is a smartphone holder and charger which operate at 111-150kHz for WPT function. Date of receipt of order: 2025-06-25 Date of receipt of test item: 2025-06-25 Date of test: 2025-06-25 to 2024-07-21 Reviewed by: Prepared by: Tested by: _______________________ _______________________ _______________________ John Zhi Lynn Huang Felix Jiang Project Manager Project Engineer Test Engineer Report Number: 6895025119101A EMC_SZ_FR_76.00 FCC Release 2023-12-01 TÜV SÜD Certification and Testing (China) Co., Ltd. Shenzhen Branch Building 12 & 13, Zhiheng Wisdomland Business Park, Guankou Erlu, Nantou, Nanshan District, Shenzhen, Guangdong, China Tel. +86 755 8828 6998, Fax: +86 755 8828 5299 Page 3 of 7 2. Summary of Test Standard Test Standards FCC Part1 §1.1310 Radiofrequency radiation exposure limits. KDB 680106 D01 Wireless Power Transfer v04 EQUIPMENT AUTHORIZATION OF WIRELESS POWER TRANSFER DEVICES 3. Test Laboratory and test Equipment List Details about the Test Laboratory: Company name: TÜV SÜD Certification and Testing (China) Co., Ltd. Shenzhen Branch Building 12&13, Zhiheng Wisdomland Business Park, Guankou Erlu, Nantou, Nanshan District, Shenzhen City, 518052, P. R. China FCC Registration No.: 514049 FCC Designation Number: CN5009 Telephone: 86 755 8828 6998 Fax: 86 755 8828 5299 4. Equipment list DESCRIPTION MANUFACTURER MODEL NO. EQUIPMENT ID SERIAL NO. CAL INTERVAL (YEAR) CAL. DUE DATE Electric and magnetic field probe Analyzer NARDA EHP-200A 68-4-27-21- 001 180ZX10218 1 2026-1-22 Test software NARDA EHP200-TS 68-4-27-21- 001-A01 02.05 N/A N/A Shielding Room #2 TDK BTC 68-4-90-19- 002 ---- 3 2025-10- 15 5. Measurement Uncertainty System Measurement Uncertainty Test Items Extended Uncertainty Uncertainty Evaluation for RF Exposure 1.45dB (Magnetic field) 1.45dB (Electric) Report Number: 6895025119101A EMC_SZ_FR_76.00 FCC Release 2023-12-01 TÜV SÜD Certification and Testing (China) Co., Ltd. Shenzhen Branch Building 12 & 13, Zhiheng Wisdomland Business Park, Guankou Erlu, Nantou, Nanshan District, Shenzhen, Guangdong, China Tel. +86 755 8828 6998, Fax: +86 755 8828 5299 Page 4 of 7 6. Limit and Guidelines on Exposure to Electromagnetic Fields According to §1.1310 system operating under the provisions of this section shall be operating in a manner that the public is not exposed to radio frequency energy level in excess limit for maximum permissible exposure. TABLE 1—LIMITS FOR MAXIMUM PERMISSIBLE EXPOSURE (MPE) Frequency range (MHz) Electric field strength (V/m) Magnetic field strength (A/m) Power density (mW/cm 2 ) Averaging time (minutes) (A) Limits for Occupational/Controlled Exposure 0.3-3.0 614 1.63 *100 <6 3.0-30 1842/f 4.89/f *900/f 2 <6 30-300 61.4 0.163 1.0 <6 300-1,500 f/300 <6 1,500-100,000 5 <6 (B) Limits for General Population/Uncontrolled Exposure 0.3-1.34 614 1.63 *100 <30 1.34-30 824/f 2.19/f *180/f 2 <30 30-300 27.5 0.073 0.2 <30 300-1,500 f/1500 <30 1,500-100,000 1.0 <30 f = frequency in MHz * = Plane-wave equivalent power density Per the guidance of KDB 680106, the E-field and H-field limits between 100 kHz to 300 kHz are to be considered the same as those at 300 kHz in Table 1 of § 1.1310 shown in the table above, any device (both portable and mobile) operating at frequencies below 100 kHz is considered compliant for the purpose of equipment authorization when the external (unperturbed) temporal peak field strengths do not exceed the 83 V/m for the electric field strength (E) and 90 A/m for the magnetic field strength (H). 7. Test setup The test distance between the edge of the EUT and the probe center is 20cm Report Number: 6895025119101A EMC_SZ_FR_76.00 FCC Release 2023-12-01 TÜV SÜD Certification and Testing (China) Co., Ltd. Shenzhen Branch Building 12 & 13, Zhiheng Wisdomland Business Park, Guankou Erlu, Nantou, Nanshan District, Shenzhen, Guangdong, China Tel. +86 755 8828 6998, Fax: +86 755 8828 5299 Page 5 of 7 8. Measurement procedure a) The RF exposure test was performed on the table in anechoic chamber. b) The measurement was investigated between the edge of the EUT and center of the field probe in the clo…

Text truncated - open the document above for the full version.

Report Number: 6895025119101 EMC_SZ_FR_23.03 FCC Release 2023-12-01 TÜV SÜD Certification and Testing (China) Co., Ltd. Shenzhen Branch Building 12&13, Zhiheng Wisdomland Business Park, Guankou Erlu, Nantou, Nanshan District, Shenzhen City, 518052, P. R. China Tel. +86 755 8828 6998, Fax: +86 755 8828 5299 Page 1 of 17 FCC - TEST REPORT Report Number : 6895025119101 Date of Issue: 2025-09-10 Model/HVIN : BSP3300 Product Type : Smartphone holder and charger Applicant : Robert Bosch GmbH Address : Markwiesenstrasse 58, 72770, Reutlingen, Germany Manufacturer : Robert Bosch GmbH Address : Markwiesenstrasse 58, 72770, Reutlingen, Germany Factory : Xiamen Intretech Inc. Address : No. 100 Dongfu West Road, Haicang District, 361027 Xiamen, PEOPLE'S REPUBLIC OF CHINA Test Result : ◼ Positive  Negative Total pages including Appendices : 17 Any use for advertising purposes must be granted in writing. This technical report may only be quoted in full. This report is the result of a single examination of the object in question and is not generally applicable evaluation of the quality of other products in regular production. For further details, please see testing and certification regulation, chapter A-3.4. Report Number: 6895025119101 EMC_SZ_FR_23.03 FCC Release 2023-12-01 TÜV SÜD Certification and Testing (China) Co., Ltd. Shenzhen Branch Building 12&13, Zhiheng Wisdomland Business Park, Guankou Erlu, Nantou, Nanshan District, Shenzhen City, 518052, P. R. China Tel. +86 755 8828 6998, Fax: +86 755 8828 5299 Page 2 of 17 1 Table of Contents 1 Table of Contents ............................................................................................................................................................... 2 2 Details about the Test Laboratory .................................................................................................................................... 3 3 Description of the Equipment Under Test ....................................................................................................................... 4 4 Summary of Test Standards ............................................................................................................................................. 5 5 Summary of Test Results .................................................................................................................................................. 6 6 General Remarks ............................................................................................................................................................... 7 7 Test Setups ......................................................................................................................................................................... 8 8 Systems test configuration ................................................................................................................................................ 9 9 Technical Requirement .................................................................................................................................................... 10 9.1 20 dB Bandwidth .......................................................................................................................................................... 10 9.2 Radiated Emission Test .............................................................................................................................................. 11 10 Test Equipment List ......................................................................................................................................................... 16 11 System Measurement Uncertainty ................................................................................................................................. 17 Report Number: 6895025119101 EMC_SZ_FR_23.03 FCC Release 2023-12-01 TÜV SÜD Certification and Testing (China) Co., Ltd. Shenzhen Branch Building 12&13, Zhiheng Wisdomland Business Park, Guankou Erlu, Nantou, Nanshan District, Shenzhen City, 518052, P. R. China Tel. +86 755 8828 6998, Fax: +86 755 8828 5299 Page 3 of 17 2 Details about the Test Laboratory Details about the Test Laboratory Test Site 1 Company name: TÜV SÜD Certification and Testing (China) Co., Ltd. Shenzhen Branch Building 12 & 13, Zhiheng Wisdomland Business Park, Guankou Erlu, Nantou, Nanshan District, Shenzhen, Guangdong, China Telephone: +86 755 8828 6998 Fax: +86 755 8828 5299 FCC Registration No.: 514049 FCC Designation Number: CN5009 Report Number: 6895025119101 EMC_SZ_FR_23.03 FCC Release 2023-12-01 TÜV SÜD Certification and Testing (China) Co., Ltd. Shenzhen Branch Building 12&13, Zhiheng Wisdomland Business Park, Guankou Erlu, Nantou, Nanshan District, Shenzhen City, 518052, P. R. China Tel. +86 755 8828 6998, Fax: +86 755 8828 5299 Page 4 of 17 3 Description of the Equipment Under Test Product Type: Smartphone holder and charger HVIN: BSP3300 FCC ID: 2AWRC-BSP3300 Hardware Version: v03 Software Version: 554c354d4f (Firmware version at IP6806) Rating: Input: 5VDC, 1.5A (powered by Bosch Display Socket - BDS) Output: 5VDC, 1.5A (USB Type-C port), 5W (wireless output) RF Transmission Frequency: 111-150kHz Antenna Type: Integrated coil antenna Modulation Type: FSK/ASK WPT Type: Magnetic Induction Description of the EUT: The Equipment Under Test (EUT) is a smartphone holder and charger which operate at 111-150kHz for WPT function. Report Number: 6895025119101 EMC_SZ_FR_23.03 FCC Release 2023-12-01 TÜV SÜD Certification and Testing (China) Co., Ltd. Shenzhen Branch Building 12&13, Zhiheng Wisdomland Business Park, Guankou Erlu, Nantou, Nanshan District, Shenzhen City, 518052, P. R. China Tel. +86 755 8828 6998, Fax: +86 755 8828 5299 Page 5 of 17 4 Summary of Test Standards Test Standards FCC Part 15 Subpart C 10-1-2023 Edition PART 15 - RADIO FREQUENCY DEVICES Subpart C - Intentional Radiators All the test methods were according to ANSI C63.10 (2020). Rep…

Text truncated - open the document above for the full version.

FinePage1of8 FINEELECTRONICSINDUSTRIAL(HK)LIMITED 泛亞電子實業(香港)有限公司TEL：0769-22490287FAX：0769-22499451FY-GZ001 承認書 SPECIFICATIONFORAPPROVAL 客戶： CUSTOMER: 厦门盈趣科技股份有限公司 客戶料號： CUSTP/N: 1.007.01.00589 泛亞料號： FINEP/N: FYG010001 産品型號： DESC: φ 20.5x42-6.3uH-29/16mm-44.2COLB 環保狀態： Environmental protectionstatus: 符合 RoHS&REACH 日期： DATE: 2022/1/22 版本： Version: A.3 擬制 PREPAREDBY 審核 CHECKEDBY 批准 APPROVEDBY 客戶承認 CUSTOMERAPPROVE 欧亮清伍桥康蔡纪雨 泛亞電子實業（HK）有限公司 FINEELECTRONICSINDUSTRIAL（HK）LIMITED 工廠地址：東莞市石碣鎮四甲工業區 TEL ： 0769-22490287/22452492 FAX ： 0769-22499451 E-mail ： [email protected] FinePage2of8 FINEELECTRONICSINDUSTRIAL(HK)LIMITED 泛亞電子實業(香港)有限公司TEL：0769-22490287FAX：0769-22499451FY-GZ001 版本變更履歷 VersionChangeHistory 版本 Rev. 變更前 BeforeChange 變更後 AfterChange 更改日期 ChangeDate 批准 ApprovedBy A.0 新发行 ----2021/01/15蔡纪雨 A.1 更新版本 更改引线长度2021/02/27蔡纪雨 A.2 更新版本 φ22*21.7*0.08mm棉纸胶（单面胶） 改为36.9*17.3*0.08mm透明麦拉 2021/03/04蔡纪雨 A.3 更新版本 1.36.9*17.3*0.08mm透明麦拉改 为15.5*4.7*0.05mm透明麦拉 2.背胶增大 3.增加以磁片缺口为中心，高温 胶带左右偏移不超过±2mm 4.H尺寸2.9Max改为2.8Max 2021/12/29 蔡纪雨 FinePage3of8 FINEELECTRONICSINDUSTRIAL(HK)LIMITED 泛亞電子實業(香港)有限公司TEL：0769-22490287FAX：0769-22499451FY-GZ001 SPECIFICATION 産品型號： DESC φ20.5x42-6.3uH-29/16mm-44.2COLB 版本 Rev：A.3 客戶CUST: 厦门盈趣科技股份 有限公司 泛亚料号FineP/N： FYG010001 客户料号CUSTP/N:1.007.01.00589 一、尺寸DIMENSION:(mm) 二、原理图SCHEMATICDIAGRAM: A 42±1.0 B 20.5±0.5 C 1.2±0.2 D1 29±1.5 D2 16±1.5 E1=E2 2-5 F 44.2±0.5 G 5.3ref H 2.8Max（不含离型纸） 注： 1.线圈交叉出线； 2.线圈出线位置贴8mm宽高温 胶； 3.线圈贴硬磁片，磁片尺…

Text truncated - open the document above for the full version.