2AWVZ-AP6212Wireless Module

SC6047090

By: __________________________ (Signature) _ (Title) Eric Liang (Print name) RD Department Test Manager +86 18689426031 (Telephone) On behalf of: Guangzhou Jetinno Intelligent Equipment Co.,LTD. (Company Name) Dear Application Examiner; Guangzhou Jetinno Intelligent Equipment Co.,LTD. is seeking full modular approval for module. The radio meets the requirements for modular approval as detailed in FCC 15.212. Compliance to each of the requirements is described below; 1.“The radio elements must have the radio frequency circuitry shielded” Yes, the modular transmitter has shield. 2. “The module must have buffered modulation/data inputs to ensure that the device will comply with Part 15 requirements with any type of input signal” Yes, the modular transmitter has buffered modulation/data inputs ensure compliance with Part 15 under conditions of excessive data rates or over-modulation. All inputs are buffered through logic or microprocessor inputs. 3.“The module must contain power supply regulation on the module” Yes, the modular transmitter has its own power supply regulation in the form of a low drop-out regulator providing 3.3V supply voltage to the board independently if the board is powered by the on-board battery or an external source. 4. “The module must contain a permanently attached antenna, or contain a unique antenna connector, and be marketed and operated only with specific antenna(s), per §§ 15.203, 15.204(b), 15.204(c), 15.212(a), 2.929(b)” Yes, Antenna permanently attached. 5.“The module must demonstrate compliance in a stand-alone configuration” Yes, the module complies to Part 15 in a stand-alone configuration 6.“The module must be labelled with its permanently affixed FCC ID label” Yes, the modular transmitter is labelled with its own FCC ID number. Because the modular transmitter may be installed inside another device, rendering its own label invisible, the integration guide of the modular transmitter informs that the host device must visibly display the necessary text (Contains FCC ID: 2AWVZ-AP6212) on the outside of the finished product. 7. “The module must comply with all specific rules applicable to the transmitter, including all the conditions provided in the integration instructions by the grantee” Yes, the module is compliant with all applicable FCC rules. Instructions for maintaining compliance are given in the integration guide. 8.“The module must comply with RF exposure requirements” Yes, the module is compliant with all applicable RF exposure requirements. Please see RF Exposure Report.

Prüfbericht - Produkte Test Report - Products Prüfbericht - Nr.: Test Report No.: CN26U9D2 001 Seite 19 von 21 Page 19 of 21 6 Safety Human Exposure 6.1 Radio Frequency Exposure Compliance 6.1.1 Electromagnetic Fields RESULT: Pass Test Specification Test standard : CFR47 FCC Part 2: Section 2.1091 CFR47 FCC Part 1: Section 1.1310 FCC KDB Publication 447498 D01 v06 RSS-102 Issue 6 December 2023 ➢ FCC requirements FCC requirement: Systems operating under the provisions of this section shall be operated in a manner that ensures that the public is not exposed to radio frequency energy level in excess limit for maximum permissible exposure. In accordance with 47 CFR FCC Part 2 Subpart J, section 2.1091 this device has been defined as a mobile device whereby a distance of 20cm normally can be maintained between the user and the device. Power Density: S (mW/cm 2 ) = PG/4πR 2 or EIRP/4πR 2 Where: S = power density (mW/cm 2 ) P = power input to the antenna (mW) G = power gain of the antenna in the direction of interest relative to an isotropic radiator R = distance to the center of radiation of the antenna (cm) The nominal maximum conducted output power specified: Wi-Fi 802.11 b/g/n: 17.38 dBm From the peak RF output power, the minimum mobile separation distance, d=20 cm, as well as the antenna gain (-1.2 dBi for Wi-Fi 802.11 b/g/n), the RF power density can be calculated as below: For Wi-Fi 802.11 b/g/n: S (mW/cm 2 ) = PG/4πR 2 = 0.013 mW/cm 2 Limits for Maximum Permissible Exposure (MPE) according to FCC Part 1.1310: 1.0 mW/cm 2 Prüfbericht - Produkte Test Report - Products Prüfbericht - Nr.: Test Report No.: CN26U9D2 001 Seite 20 von 21 Page 20 of 21 ➢ IC requirements: The EUT shall comply with the requirement of RSS-102 section 2.5.2. Exemption from Routine Evaluation Limits – RF Exposure Evaluation RF exposure evaluation is required if the separation distance between the user and/or bystander and the device’s radiating element is greater than 20 cm, except when the device operates as follows: at or above 300 MHz and below 6 GHz and the source-based, time-averaged maximum e.i.r.p. of the device is equal to or less than 1.31 x 10 -2 ƒ 0.6834 W (adjusted for tune-up tolerance), where ƒ is in MHz; • RF exposure evaluation exempted power for Wi-Fi 802.11 b/g/n: 2.684 W The nominal maximum conducted output power specified: Wi-Fi 802.11 b/g/n: 17.38 dBm Antenna Gain: -1.2 dBi for Wi-Fi 802.11 b/g/n The Max. e.i.r.p. for Wi-Fi 802.11 b/g/n: 16.18 dBm = 0.041 W So e.i.r.p. of Wi-Fi 802.11 b/g/n are less than the RF exposure evaluation exempted power. “RF Radiation Exposure Statement Caution: This Transmitter must be installed to provide a separation distance of at least 20 cm from all persons.”

Prüfbericht - Produkte Test Report - Products Prüfbericht-Nr.: Test report no.: CN26U9D2 001 Auftrags-Nr.: Order no.: 170440024 Seite 1 von 21 Page 1 of 21 Kunden-Referenz-Nr.: Client reference no.: N/A Auftragsdatum: Order date: 2026.01.06 Auftraggeber: Client: Guangzhou Jetinno Intelligent Equipment Co.,LTD. No.220, Xiangli Road, Huangpu District, Guangzhou, Guangdong, China Prüfgegenstand: Test item: Wireless Module Bezeichnung / Typ-Nr.: Identification / Type no.: AP6212 Auftrags-Inhalt: Order content: Test Report Prüfgrundlage: Test specification: FCC CFR Title 47, Part 15, Subpart C, Section 15.247 RSS-247 Issue 4 August 2025 RSS-Gen Issue 5 March 2019 Wareneingangsdatum: Date of sample receipt: 2026.02.28 Please refer to Photo Document Prüfmuster-Nr.: Test sample no: A004214765-001/002/003 Prüfzeitraum: Testing period: Refer to test report Ort der Prüfung: Place of testing: Refer to section 2.1 Prüflaboratorium: Testing laboratory: TÜV Rheinland (Guangdong) Co., Ltd. Prüfergebnis*: Test result*: Pass geprüft von: tested by: Signed by: Amy Wang genehmigt von: authorized by: Signed by: Storm Shu Datum: Date: 2026-05-13 Ausstellungsdatum: Issue date: 2026-05-13 Stellung / Position: Sachverständige(r)/Expert Stellung / Position: Sachverständige(r)/Expert Sonstiges / Other: FCC ID: 2AWVZ-AP6212 IC: 35378-AP6212 HVIN: AP6212 Zustand des Prüfgegenstandes bei Anlieferung: Condition of the test item at delivery: Prüfmuster vollständig und unbeschädigt Test item complete and undamaged * Legende: 1 = sehr gut 2 = gut 3 = befriedigend 4 = ausreichend 5 = mangelhaft P(ass) = entspricht o.g. Prüfgrundlage(n) F(ail) = entspricht nicht o.g. Prüfgrundlage(n) N/A = nicht anwendbar N/T = nicht getestet * Legend: 1 = very good 2 = good 3 = satisfactory 4 = sufficient 5 = poor P(ass) = passed a.m. test specification(s) F(ail) = failed a.m. test specification(s) N/A = not applicable N/T = not tested Dieser Prüfbericht bezieht sich nur auf das o.g. Prüfmuster und darf ohne Genehmigung der Prüfstelle nicht auszugsweise vervielfältigt werden. Dieser Bericht berechtigt nicht zur Verwendung eines Prüfzeichens. This test report only relates to the a. m. test sample. Without permission of the test center this test report is not permitted to be duplicated in extracts. This test report does not entitle to carry any test mark. TUV Rheinland (Guangdong) Ltd. No.199 Kezhu Road, Guangzhou Science City, Guangzhou 510663, Guangdong Province P.R. China Mail: [email protected] · Web: www.tuv.com V101023GCNSR Prüfbericht - Produkte Test Report - Products Prüfbericht-Nr.: Test report no.: CN26U9D2 001 Page 2 of 21 Seite 2 von 21 Anmerkungen Remarks 1 The equipment used during the specified testing period was calibrated according to our test laboratory calibration program. The equipment fulfils the requirements included in the relevant standards. The traceability of the test equipment used is ensured by compliance with the regulations of our management system. Detailed information regarding test conditions, equipment and measurement uncertainty is available in the test laboratory and could be provided on request. Alle eingesetzten Prüfmittel waren zum angegebenen Prüfzeitraum gemäß eines festgelegten Kalibrierungsprogramms unseres Prüfhauses kalibriert. Sie entsprechen den in den Prüfprogrammen hinterlegten Anforderungen. Die Rückverfolgbarkeit der eingesetzten Prüfmittel ist durch die Einhaltung der Regelungen unseres Managementsystems gegeben. Detaillierte Informationen bezüglich Prüfkonditionen, Prüfequipment und Messunsicherheiten sind im Prüflabor vorhanden und können auf Wunsch bereitgestellt werden. 2 As contractually agreed, this document has been signed digitally only. TUV Rheinland has not verified and unable to verify which legal or other pertaining requirements are applicable for this document. Such verification is within the responsibility of the user of this document. Upon request by its client, TUV Rheinland can confirm the validity of the digital signature by a separate document. Such request shall be addressed to our Sales department. An environmental fee for such additional service will be charged. Wie vertraglich vereinbart, wurde dieses Dokument nur digital unterzeichnet. Der TÜV Rheinland hat nicht überprüft, welche rechtlichen oder sonstigen diesbezüglichen Anforderungen für dieses Dokument gelten. Diese Überprüfung liegt in der Verantwortung des Benutzers dieses Dokuments. Auf Verlangen des Kunden kann der TÜV Rheinland die Gültigkeit der digitalen Signatur durch ein gesondertes Dokument bestätigen. Diese Anfrage ist an unseren Vertrieb zu richten. Eine Umweltgebühr für einen solchen zusätzlichen Service wird erhoben. 3 Test clauses with remark of * are subcontracted to qualified subcontractors and descripted under the respective test clause in the report. Deviations of testing specification(s) or customer requirements are listed in specific test clause in the report. Prüfklausel mit der Note * wurden an qualifizierte Unterauftragnehmer vergeben und sind unter der jeweiligen Prüfklausel des Berichts beschrieben. Abweichungen von Prüfspezifikation(en) oder Kundenanforderungen sind in der jeweiligen Prüfklausel im Bericht aufgeführt. 4 The decision rule for statements of conformity, based on numerical measurement results, in this test report is based on the “Zero Guard Band Rule” and “Simple Acceptance” in accordance with ILAC G8:2019 and IEC Guide 115:2021, unless otherwise specified in the applied standard mentioned on Page 1 of this report or requested by the customer. This means that measurement uncertainty is not taken in account and hence also not declared in the test report. For additional information to the resulting risk based of this decision rule please refer to ILAC G8:2019. Die Entscheidungsregel für Konformitätserklärungen basierend auf numerischen Messergebnisen in diesem Prüfbericht basiert auf der "Null-Grenzwert-Regel" und der "Einfachen Akzeptanz" gemäß ILAC G8:2019 und IEC Guide 1…

Text truncated - open the document above for the full version.

Prüfbericht - Produkte Test Report - Products Appendix B CN26U9D2 001 Page 1 of 57 Appendix B: Test Results of Wi-Fi 802.11 b/g/n APPENDIX B: TEST RESULTS OF WI-FI 802.11 B/G/N .................................................................................................... 1 APPENDIX B.1: TEST RESULTS OF CONDUCTED POWER SPECTRAL DENSITY ..................................................................................... 2 APPENDIX B.2: TEST RESULTS OF 6DB BANDWIDTH.................................................................................................................... 6 APPENDIX B.3: TEST RESULTS OF 99% BANDWIDTH ................................................................................................................. 10 APPENDIX B.4: TEST RESULTS OF CONDUCTED SPURIOUS EMISSIONS MEASURED IN 100 KHZ BANDWIDTH ....................................... 14 APPENDIX B.5: TEST RESULTS OF RADIATED SPURIOUS EMISSIONS ............................................................................................. 26 30MHz - 1GHz ............................................................................................................................................................. 26 Above 1GHz ................................................................................................................................................................ 28 Prüfbericht - Produkte Test Report - Products Appendix B CN26U9D2 001 Page 2 of 57 Appendix B.1: Test Results of Conducted Power Spectral Density Condition Mode Frequency (MHz) Conducted PSD (dBm/3kHz) Limit (dBm/3kHz) Verdict NVNT b 2412 -3.75 8 Pass NVNT b 2437 -5.60 8 Pass NVNT b 2462 -5.38 8 Pass NVNT g 2412 -9.22 8 Pass NVNT g 2437 -8.99 8 Pass NVNT g 2462 -9.75 8 Pass NVNT n20 2412 -9.67 8 Pass NVNT n20 2437 -9.24 8 Pass NVNT n20 2462 -10.15 8 Pass Prüfbericht - Produkte Test Report - Products Appendix B CN26U9D2 001 Page 3 of 57 Test Graphs PSD NVNT b 2412MHz PSD NVNT b 2437MHz PSD NVNT b 2462MHz Prüfbericht - Produkte Test Report - Products Appendix B CN26U9D2 001 Page 4 of 57 PSD NVNT g 2412MHz PSD NVNT g 2437MHz PSD NVNT g 2462MHz Prüfbericht - Produkte Test Report - Products Appendix B CN26U9D2 001 Page 5 of 57 PSD NVNT n20 2412MHz PSD NVNT n20 2437MHz PSD NVNT n20 2462MHz Prüfbericht - Produkte Test Report - Products Appendix B CN26U9D2 001 Page 6 of 57 Appendix B.2: Test Results of 6dB Bandwidth DTS Bandwidth Test Result Condition Mode Frequency (MHz) -6 dB Bandwidth (MHz) Limit -6 dB Bandwidth (MHz) Verdict NVNT b 2412 8.178 0.5 Pass NVNT b 2437 9.107 0.5 Pass NVNT b 2462 9.108 0.5 Pass NVNT g 2412 15.82 0.5 Pass NVNT g 2437 16.03 0.5 Pass NVNT g 2462 15.72 0.5 Pass NVNT n20 2412 16.47 0.5 Pass NVNT n20 2437 16.27 0.5 Pass NVNT n20 2462 16.08 0.5 Pass Prüfbericht - Produkte Test Report - Products Appendix B CN26U9D2 001 Page 7 of 57 Test Graphs -6dB Bandwidth NVNT b 2412MHz -6dB Bandwidth NVNT b 2437MHz -6dB Bandwidth NVNT b 2462MHz Prüfbericht - Produkte Test Report - Products Appendix B CN26U9D2 001 Page 8 of 57 -6dB Bandwidth NVNT g 2412MHz -6dB Bandwidth NVNT g 2437MHz -6dB Bandwidth NVNT g 2462MHz Prüfbericht - Produkte Test Report - Products Appendix B CN26U9D2 001 Page 9 of 57 -6dB Bandwidth NVNT n20 2412MHz -6dB Bandwidth NVNT n20 2437MHz -6dB Bandwidth NVNT n20 2462MHz Prüfbericht - Produkte Test Report - Products Appendix B CN26U9D2 001 Page 10 of 57 Appendix B.3: Test Results of 99% Bandwidth Condition Mode Frequency (MHz) 99% OBW (MHz) NVNT b 2412 13.256 NVNT b 2437 13.991 NVNT b 2462 13.985 NVNT g 2412 16.311 NVNT g 2437 16.323 NVNT g 2462 16.304 NVNT n20 2412 17.424 NVNT n20 2437 17.439 NVNT n20 2462 17.444 Prüfbericht - Produkte Test Report - Products Appendix B CN26U9D2 001 Page 11 of 57 Test Graphs OBW NVNT b 2412MHz OBW NVNT b 2437MHz OBW NVNT b 2462MHz Prüfbericht - Produkte Test Report - Products Appendix B CN26U9D2 001 Page 12 of 57 OBW NVNT g 2412MHz OBW NVNT g 2437MHz OBW NVNT g 2462MHz Prüfbericht - Produkte Test Report - Products Appendix B CN26U9D2 001 Page 13 of 57 OBW NVNT n20 2412MHz OBW NVNT n20 2437MHz OBW NVNT n20 2462MHz Prüfbericht - Produkte Test Report - Products Appendix B CN26U9D2 001 Page 14 of 57 Appendix B.4: Test Results of Conducted Spurious Emissions Measured in 100 kHz Bandwidth Condition Mode Frequency (MHz) Max Value (dBc) Limit (dBc) Verdict NVNT b 2412 -56.35 -20 Pass NVNT b 2437 -56.55 -20 Pass NVNT b 2462 -55.39 -20 Pass NVNT g 2412 -52.72 -20 Pass NVNT g 2437 -51.21 -20 Pass NVNT g 2462 -52.42 -20 Pass NVNT n20 2412 -51.23 -20 Pass NVNT n20 2437 -51.9 -20 Pass NVNT n20 2462 -52.42 -20 Pass All modes and ports tested, only the worst-case report Prüfbericht - Produkte Test Report - Products Appendix B CN26U9D2 001 Page 15 of 57 Test Graphs Tx. Spurious NVNT b 2412MHz Ref Tx. Spurious NVNT b 2412MHz Emission Tx. Spurious NVNT b 2437MHz Ref Prüfbericht - Produkte Test Report - Products Appendix B CN26U9D2 001 Page 16 of 57 Tx. Spurious NVNT b 2437MHz Emission Tx. Spurious NVNT b 2462MHz Ref Tx. Spurious NVNT b 2462MHz Emission Prüfbericht - Produkte Test Report - Products Appendix B CN26U9D2 001 Page 17 of 57 Tx. Spurious NVNT g 2412MHz Ref Tx. Spurious NVNT g 2412MHz Emission Tx. Spurious NVNT g 2437MHz Ref Prüfbericht - Produkte Test Report - Products Appendix B CN26U9D2 001 Page 18 of 57 Tx. Spurious NVNT g 2437MHz Emission Tx. Spurious NVNT g 2462MHz Ref Tx. Spurious NVNT g 2462MHz Emission Prüfbericht - Produkte Test Report - Products Appendix B CN26U9D2 001 Page 19 of 57 Tx. Spurious NVNT n20 2412MHz Ref Tx. Spurious NVNT n20 2412MHz Emission Tx. Spurious NVNT n20 2437MHz Ref Prüfbericht - Produkte Test Report - Products Appendix B CN26U9D2 001 Page 20 of 57 Tx. Spurious NVNT n20 2437MHz Emission Tx. Spurious NVNT n20 2462MHz Ref Tx. Spurious NVNT n20 2462MHz Emission Prüfbericht - Produkte Test Report - Products Appendix B CN26U9D2 001 Page 21 of 57 Band edge: Condition Mode Frequency (MHz) Max Value (dBc) Limit (dBc) Verdict NVNT b 2412 -33.27 -20 Pass NVN…

Text truncated - open the document above for the full version.

Page：1 / 4P/N:AB0002AA 深圳市志远通讯科技有限公司 Shenzhen Ambitele Communication Technology Co.,Ltd. 规规规规规规 SPECIFICATION FOR APPROVAL 客 户 C U S T O M E R: 技诺智能 客 户 料 号 CUSTOMER P / N : 品 名 P A R T N A M E: WiFi Antenna 供 方 料 号 AMBITELE P / N: AB0002AA 日期 D A T E： 2023-07-17 供方确认 APPROVED SIGNATURES 客户确认 CUSTOMER APPROVED BY CHECKED BYAPPROVED BYCHECKED BYAPPROVED BY EthanDarren 0 深深深深深深深深深深深深深 Shenzhen Ambitele Communication Technology Co.,Ltd. Add ：深深深深深深深深深深深深深深深深深深398号号号号 深大 A708 TEL ：18123707115 Mail ：[email protected] Web ：http://www.ambitele.com 3 2X10-150 Page：2 / 4 P/N:AB0002AA 1.Electrical specifications Frequency (MHz) 2.4-2.5GHz/5.15-5.85GHz V.S.W.R Max 3.0 Peak Gain (dBi) -1.2 [email protected]/2.0 [email protected] Impendance (Ohm) 50 Polarisation Linear Radiation Pattern Omni-directional Max.Input Power (W) 15 2. Mechanical and environmental specif ications Connector Ipex 1 Cable Type 1.13 Dimensions (mm) 31.5*10.0 Material FPC Operating Temp -40 ~ +85 ̊C Storage Temp/Humidity 25±5 ̊C / <70% 3.S Parameter Test Page：3 / 4 P/N:AB0002AA 4.Drawing Page：4 / 4 P/N:AB0002AA 5.Passive Test Freq (MHz) Effi (%) Effi (dB) Gain (dBi) 240023.5-6.28-3.1 241025.4-5.95-2.9 242026.1-5.8-2.8 243025-6-2.6 244024.1-6.17-2.4 245024.3-6.14-2.2 246024.9-6.03-2.3 247025.5-5.9-2.2 248025.8-5.8-2.2 249027-5.6-2 250030.2-5.1-1.2 515030.5-5.1-0.9 520029-5.37-0.8 525027.6-5.5-0.8 530031.5-5.01-0.4 535035.7-4.470.7 540045.5-3.411.5 545047-3.271.3 550044-3.50.9 555043.58-3.60.6 560045.6-3.41 565042.4-3.72 570042.5-3.70.8 575041.7-3.790.6 580041.6-3.80.5 585040.85-3.80.4 END