2AWVZ-JL500WWIFI module

Datasheet FM17520 Contactless Transceiver IC Ver 1.0 1 FM17520 Contactless Transceiver IC Datasheet Oct.2016 Datasheet FM17520 Contactless Transceiver IC Ver 1.0 2 INFORMATION IN THIS DOCUMENT IS INTENDED AS A REFERENCE TO ASSIST OUR CUSTOMERS IN THE SELECTION OF SHANGHAI FUDAN MICROELECTRONICS GROUP CO., LTD PRODUCT BEST SUITED TO THE CUSTOMER'S APPLICATION; THEY DO NOT CONVEY ANY LICENSE UNDER ANY INTELLECTUAL PROPERTY RIGHTS, OR ANY OTHER RIGHTS, BELONGING TO SHANGHAI FUDAN MICROELECTRONICS GROUP CO., LTD OR A THIRD PARTY. WHEN USING THE INFORMATION CONTAINED IN THIS DOCUMENTS, PLEASE BE SURE TO EVALUATE ALL INFORMATION AS A TOTAL SYSTEM BEFORE MAKING A FINAL DECISION ON THE APPLICABILITY OF THE INFORMATION AND PRODUCTS. PURCHASERS ARE SOLELY RESPONSIBLE FOR THE CHOICE, SELECTION AND USE OF THE SHANGHAI FUDAN MICROELECTRONICS GROUP CO., LTD PRODUCTS AND SERVICES DESCRIBED HEREIN, AND SHANGHAI FUDAN MICROELECTRONICS GROUP CO., LTD ASSUMES NO LIABILITY WHATSOEVER RELATING TO THE CHOICE, SELECTION OR USE OF THE SHANGHAI FUDAN MICROELECTRONICS GROUP CO., LTD PRODUCTS AND SERVICES DESCRIBED HEREIN.UNLESS EXPRESSLY APPROVED IN WRITING BY AN AUTHORIZED SHANGHAI FUDAN MICROELECTRONICS GROUP CO., LTD REPRESENTATIVE, SHANGHAI FUDAN MICROELECTRONICS GROUP CO., LTD PRODUCTS ARE NOT RECOMMENDED, AUTHORIZED OR WARRANTED FOR USE IN MILITARY, AIR CRAFT, SPACE, LIFE SAVING, OR LIFE SUSTAINING APPLICATIONS, NOR IN PRODUCTS OR SYSTEMS WHERE FAILURE OR MALFUNCTION MAY RESULT IN PERSONAL INJURY, DEATH, OR SEVERE PROPERTY OR ENVIRONMENTAL DAMAGE. FUTURE ROUTINE REVISIONS WILL OCCUR WHEN APPROPRIATE, WITHOUT NOTICE. CONTACT SHANGHAI FUDAN MICROELECTRONICS GROUP CO., LTD SALES OFFICE TO OBTAIN THE LATEST SPECIFICATIONS AND BEFORE PLACING YOUR PRODUCT ORDER. PLEASE ALSO PAY ATTENTION TO INFORMATION PUBLISHED BY SHANGHAI FUDAN MICROELECTRONICS GROUP CO., LTD BY VARIOUS MEANS, INCLUDING SHANGHAI FUDAN MICROELECTRONICS GROUP CO., LTD HOME PAGE (HTTP://WWW.FMSH.COM/). PLEASE CONTACT SHANGHAI FUDAN MICROELECTRONICS GROUP CO., LTD LOCAL SALES OFFICE FOR THE SPECIFICATION REGARDING THE INFORMATION IN THIS DOCUMENT OR SHANGHAI FUDAN MICROELECTRONICS GROUP CO., LTD PRODUCTS. Trademarks Shanghai Fudan Microelectronics Group Co., Ltd name and logo, the “复旦” logo are trademarks or registered trademarks of Shanghai Fudan Microelectronics Group Co., Ltd or its subsidiaries in China. Shanghai Fudan Microelectronics Group Co., Ltd, Printed in the China, All Rights Reserved. Contents Datasheet FM17520 Contactless Transceiver IC Ver 1.0 3 Contents CONTENTS ............................................................................................................................................................................. 3 TABLES ................................................................................................................................................................................... 5 FIGURES ................................................................................................................................................................................. 8 1 PRODUCT OVERVIEW .................................................................................................................................................... 9 1.1 INTRODUCTION ..................................................................................................................................................................... 9 1.2 FEATURES ............................................................................................................................................................................ 9 1.3 BLOCK DIAGRAM ................................................................................................................................................................ 10 1.4 PINNING INFORMATION ....................................................................................................................................................... 11 1.4.1 FM17520 Pinning Assignment ............................................................................................................................... 11 2 FUNCTIONAL DESCRIPTION ......................................................................................................................................... 13 2.1 GENERAL DESCRIPTION ........................................................................................................................................................ 13 2.2 ISO/IEC14443 A FUNCTIONALITY ........................................................................................................................................ 13 3 FM17520 REGISTER SET .............................................................................................................................................. 15 3.1 FM17520 REGISTERS OVERVIEW .......................................................................................................................................... 15 3.1.1 Registers Overview ................................................................................................................................................. 15 3.1.2 Register Bit Behavior .............................................................................................................................................. 17 3.2 REGISTER DESCRIPTION ........................................................................................................................................................ 17 3.2.1 Page 0：Command and Status .............................................................................................................................. 17 3.2.2 Page 1：Communication ....................................................................................................................................... 26 3.2.3 Page 2：Configuration .......................................................................…

Text truncated - open the document above for the full version.

2020-07-20 Federal Communications Commission Authorization & Evaluation Division 7345 Oakland Mills Road Columbia, Maryland 21046 RE: LETTER OF AGENT AUTHORIZATION To Whom It May Concern: We, the undersigned, hereby authorize Compliance Testing, LLC to act on our behalf in all matters relating to application for equipment authorization, including the signing of all documents relating to these matters. We also hereby certify that no party to the application authorized hereunder is subject to the denial of benefits, including FCC benefits, pursuant to Section 5301 of the Anti-Drug Abuse Act of 1988, 21 U.S.C.853(a). Sincerely, Name: Ericliang Title: Manager Company: Guangzhou Jetinno Intelligent Equipment Co.,LTD.

2020-07-20 Federal Communications Commission Authorization & Evaluation Division 7345 Oakland Mills Road Columbia, Maryland 21046 Authority to Act as Agent On our behalf, I appoint Shenzhen STS Test Services Co., Ltd., 1/F., Building B, Zhuoke Science Park, No.190, Chongqing Road, Fuyong Street, Bao’an District, Shenzhen, Guangdong,China (Name of Agent company name and address) to act as our agent in the preparation of this application for equipment certification. I certify that submitted documents properly describe the device or system for which equipment certification is sought. I also certify that each unit manufactured, imported or marketed, as defined in the Federal Communications Commission’s regulations will have affixed to it a label identical to that submitted for approval with this application. For instances where our authorized agent signs the application for certification on our behalf, I acknowledge that all responsibility for complying with the terms and conditions for certification, still resides with Guangzhou Jetinno Intelligent Equipment Co.,LTD. 4/F,Building A,No.2,Ruitai Road,Huangpu,Guangzhou,Guangdong,China Guangzhou, 510670, CHINA (Applicant Name and address) Sincerely, Name: Ericliang Title: Manager Company: Guangzhou Jetinno Intelligent Equipment Co.,LTD.

2020-07-20 Equipment Autorisation Division Federal Communications Commission 7435 Oakland Mills Road Columbia, MD 21046 FCC ID:__ 2AWVZ-JL500W___ Product Name:___ WIFI module ___ Model name: AP6212 Request for Confidentiality Pursuant to Sections 0.457 and 0.459 of the commissions rules, we hereby request that the following documents be held confidential: (List here the documents for which you are seeking confidentiality – for example ...)  Schematics  Block diagram  Operation description These materials contain trade secrets and proprietary information and are not customarily released to the public. The public disclosure of this information might be harmful to the company and provide unjustified benefits to our competitors. Sincerely, Name: Ericliang Title: Manager Company: Guangzhou Jetinno Intelligent Equipment Co.,LTD.

Single Modular approval Declaration letter We ,apply Single modular approval for Product Name:WIFI module Model:AP6212 FCC ID:2AWVZ-JL500W According to 996369 D01 Module Equip Auth Guide v01r04 and 15.212 requirement: 1) The radio elements must have the radio frequency circuitry shielded. Physical components and tuning capacitor(s) may be located external to the shield, but must beon the module assembly; Answer ：Yes，with shielded 2)The module must have buffered modulation/data inputs to ensure that the device will comply with Part 15 requirements with any type of input signal; Answer ：Yes ；All inputs to the modules are buffered through logic or microprocessor inputs. 3)The modular transmitter must have its own power supply regulation. Answer ：Yes ；A low drop out regulator is used for modular power supply regulation. 4)The module must contain a permanently attached antenna, or contain a unique antenna connector, and be marketed and operated only with specific antenna(s), per Sections 15.203, 15.204(b), 15.204(c), 15.212(a), 2.929(b); Answer ：Yes ；Device is equipped with sucker antenna. (5)The module must demonstrate compliance in a stand-alone configuration; Answer ：Yes，distance between modular and all AEs are longer than 20cm ， refer to setup photo. (6) The module must be labelled with its permanently affixed FCC ID label, or use an electronic display (See KDB Publication 784748 about labelling requirements); Answer ：Yes ；The modular has a permanent fixed label, and below statement was listed in the User Manual;The host device must be labeled to display the FCCID of the moduleContains FCC ID:2AWVZ-JL500W (7)The module must comply with all specific rules applicable to the transmitter including all the conditions provided in the integration instructions by the grantee; Answer ：Yes ；The module comply with all specific rules applicable to the transmitter including all the conditions provided in the integration instructions by the grantee, Refer to test report and user manual . (8)The module must comply with RF exposure requirements Answer ：Yes ；Transmitter meets MPE calculation of 47 CFR 1.1307 . Refer to MPEReports and Refer to modular installation manual Sincerely, Name:Ericliang Title:Manager Company:Guangzhou Jetinno Intelligent Equipment Co.,LTD.

APPENDIX-PHOTOGRAPHS OF EUT CONSTRUCTIONAL DETAILS Model: AP6212 FCC ID: 2AWVZ-JL500W

Label Size: 9mm * 9mm , etch Model: AP6212 FCC ID: 2AWVZ-JL500W

APPENDIX-PHOTOGRAPHS OF EUT CONSTRUCTIONAL DETAILS Model: AP6212 FCC ID: 2AWVZ-JL500W Antenna Port

RF Exposure Report FCC-ID: 2AWVZ-JL500W RF Exposure Measurement The limit for Maximum Permissible Exposure (MPE) specified in FCC 1.1310 is followed. The gain of the antennas used in the product is extracted from the Antenna data sheets provided and also the maximum total power input to the antenna is measured. Through the Friis transmission formula and the maximum gain of the antenna, we can calculate the distance, away from the product, where the limit of MPE is reached. Although the Friis Transmission formula is far field assumption, the calculated result of that is an over-prediction for near field power density. It is taken as worst case to specify the safety range. RF Exposure Limit According to FCC 1.1310: The criteria listed in the following table shall be used to evaluate the environmental impact of the human exposure to radio-frequency (RF) radiation as specified in 1.1307 (b) Limits for Maximum Permissible Exposure (MPE) F= Frequency in MHz Frequency Range (MHz) Electric Field Strength (V/m) Magnetic Field Strength (A/m) Power Density (mW/cm²) Limits for Occupational / controlled Exposures 300 - 1500 -- -- F/300 1500 – 100000 -- -- 5.0 Limits for General population / Uncontrolled Exposure 300 - 1500 -- -- F/1500 1500 – 100000 -- -- 1.0 Friss Formula Friss Transmission Formula: Pd = (Pout * G) / (4*pi*r²) Where Pd = power density in mW/cm² Pout = output power to antenna in mW G = gain of antenna in linear scale Pi = 3.1416 R = Distance between observation point and the center of radiator in cm If we know the maximum gain of the antenna and the total output power to the antenna, through calculation, we will know MPE value at distance 20cm. EUT Operation condition EUT was enabled to transmit and receive at lowest, middle and highest channels. Classification The antenna of this product, under normal use condition, is at least 20cm away from the body of the user. Warning statement to the user for keeping at least 20cm or more separation distance from the antenna should be included in the User manual. So, this device is classified as Mobile device. 2.4G WIFI Mode 802.11b/g/n20:2412-2462MHz Detector AVG 802.11b 17±1dBm 802.11g 14±1dBm 802.11n20 13±1dBm ANT Gain (G) Antenna gain : 0dBi (gain of antenna in linear scale=1) 802.11 b12412 1863.09570.01256 1 802.11 g12412 1531.62280.00629 1 802.11 n2012412 1425.11890.00500 1 Power Density (mW/cm²) Limit (mW/cm ²) ANT Gain(gain of antenna in linear scale) Protocol Channel Frequen cy (MHz) Output Power to Antenna (dBm) Output Power to Antenna (mW)

Any reproduction of this document must be done in full. No single part of this document may be reproduced without permission from STS, All Test Data Presented in this report is only applicable to presented Test sample. Shenzhen STS Test Services Co., Ltd. A 1/F, Building B, Zhuoke Science Park, No.190 Chongqing Road, HepingShequ, Fuyong Sub-District, Bao’an District, Shenzhen, Guang Dong, China RADIO TEST REPORT Report No.:STS2004241W01 Issued for Guangzhou Jetinno Intelligent Equipment Co.,LTD. 4/F,Building A,No.2,Ruitai Road,Huangpu,Guangzhou,Guangdong,China Guangzhou, 510670, CHINA Product Name: WIFI module Brand Name: N/A Model Name: AP6212 Series Model: N/A FCC ID: 2AWVZ-JL500W Test Standard: FCC Part 15.247 Page 2 of 60 Report No.:STS2004241W01 TEST RESULT CERTIFICATION Applicant’s Name ................. : Guangzhou Jetinno Intelligent Equipment Co.,LTD. Address .................................. : 4/F,Building A,No.2,Ruitai Road,Huangpu,Guangzhou,Guangdong, China Guangzhou, 510670, CHINA Manufacture's Name ............ : Guangzhou Jetinno Intelligent Equipment Co.,LTD. Address .................................. : 4/F,Building A,No.2,Ruitai Road,Huangpu,Guangzhou,Guangdong, China Guangzhou, 510670, CHINA Product Description Product Name ........................ : WIFI module Brand Name ........................... : N/A Model Name ........................... : AP6212 Series Model .......................... : N/A Test Standards ..................... : FCC Part15.247 Test Procedure........................: ANSI C63.10-2013 This device described above has been tested by STS, the test results show that the equipment under test (EUT) is in compliance with the FCC requirements. And it is applicable only to the tested sample identified in the report. This report shall not be reproduced except in full, without the written approval of STS, this document only be altered or revised by STS, personal only, and shall be noted in the revision of the document. Date of Test ............................................ : Date of receipt of test item ...................... : 26 Apr. 2020 Date (s) of performance of tests ............. : 26 Apr. 2020 ~ 30 June 2020 Date of Issue .......................................... : 01 July 2020 Test Result .............................................. : Pass Testing Engineer : (Chris Chen) Technical Manager : (Sean she) Authorized Signatory: (Vita Li) Page 3 of 60 Report No.:STS2004241W01 Table of Contents Page 1. SUMMARY OF TEST RESULTS 6
1.1 TEST FACTORY 7
1.2 MEASUREMENT UNCERTAINTY 7
2. GENERAL INFORMATION 8
2.1 GENERAL DESCRIPTION OF THE EUT 8
2.2 DESCRIPTION OF THE TEST MODES 10
2.3 TEST SOFTWARE AND POWER LEVEL 10
2.4 BLOCK DIGRAM SHOWING THE CONFIGURATION OF SYSTEM TESTED 11
2.5 DESCRIPTION OF NECESSARY ACCESSORIES AND SUPPORT UNITS 12
2.6 EQUIPMENTS LISTS 13
3. EMC EMISSION TEST 14
3.1 CONDUCTED EMISSION MEASUREMENT 14
3.2 RADIATED EMISSION MEASUREMENT 18
4.CONDUCTED SPURIOUS & BAND EDGE EMISSION 30
4.1 LIMIT 30
4.2 TEST PROCEDURE 30
4.3 DEVIATION FROM STANDARD 30
4.4 TEST SETUP 30
4.5 EUT OPERATION CONDITIONS 30
4.6 TEST RESULTS 31
5. POWER SPECTRAL DENSITY TEST 43
5.1 LIMIT 43
5.2 TEST PROCEDURE 43
5.3 DEVIATION FROM STANDARD 43
5.4 TEST SETUP 43
5.5 EUT OPERATION CONDITIONS 43
5.6 TEST RESULTS 44
6. BANDWIDTH TEST 50
6.1 LIMIT 50
6.2 TEST PROCEDURE 50
6.3 DEVIATION FROM STANDARD 50
6.4 TEST SETUP 50
6.5 EUT OPERATION CONDITIONS 50
Page 4 of 60 Report No.:STS2004241W01 Table of Contents Page 6.6 TEST RESULTS 51
7. PEAK OUTPUT POWER TEST 57
7.1 LIMIT 57
7.2 TEST PROCEDURE 57
7.3 DEVIATION FROM STANDARD 57
7.4 TEST SETUP 57
7.5 EUT OPERATION CONDITIONS 57
7.6 TEST RESULTS 58
8. ANTENNA REQUIREMENT 59
8.1 STANDARD REQUIREMENT 59
8.2 EUT ANTENNA 59
APPENDIX-PHOTOS OF TEST SETUP 60
Page 5 of 60 Report No.:STS2004241W01 Revision History Rev. Issue Date Report No. Effect Page Contents 00 01 July 2020 STS2004241W01 ALL Initial Issue Page 6 of 60 Report No.:STS2004241W01 1. SUMMARY OF TEST RESULTS Test procedures according to the technical standards: KDB 558074 D01 15.247 Meas Guidance v05r02. FCC Part 15.247,Subpart C Standard Section Test Item Judgment Remark 15.207 Conducted Emission PASS -- 15.247 (a)(2) 6dB Bandwidth PASS -- 15.247 (b)(3) Output Power PASS -- 15.247 (c) Radiated Spurious Emission PASS -- 15.247 (d) Conducted Spurious & Band Edge Emission PASS -- 15.247 (e) Power Spectral Density PASS -- 15.205 Restricted Band Edge Emission PASS -- Part 15.247(d)/part 15.209(a) Band Edge Emission PASS -- 15.203 Antenna Requirement PASS -- NOTE: (1) “N/A” denotes test is not applicable in this Test Report. (2) All tests are according to ANSI C63.10-2013. Page 7 of 60 Report No.:STS2004241W01 1.1 TEST FACTORY SHENZHEN STS TEST SERVICES CO., LTD Add. : A 1/F, Building B, Zhuoke Science Park, No.190 Chongqing Road, HepingShequ, Fuyong Sub-District,Bao’an District, Shenzhen, Guang Dong, China FCC test Firm Registration Number: 625569 IC test Firm Registration Number: 12108A A2LA Certificate No.: 4338.01 1.2 MEASUREMENT UNCERTAINTY The reported uncertainty of measurement y ±U, where expended uncertainty U is based on a standard uncertainty multiplied by a coverage factor of k=2, providing a level of confidence of approximately 95 %. No. Item Uncertainty 1 RF output power, conducted ±0.68dB 2 Unwanted Emissions, conducted ±2.988dB 3 All emissions, radiated 30-1GHz ±5.6dB 4 All emissions, radiated 1G-6GHz ±5.5dB 5 All emissions, radiated>6G ±5.8dB 6 Conducted Emission (9KHz-150KHz) ±3.37dB 7 Conducted Emission (150KHz-30MHz) ±3.83dB Page 8 of 60 Report No.:STS2004241W01 2. GENERAL INFORMATION 2.1 GENERAL DESCRIPTION OF THE EUT Product Name WIFI module Trade Name N/A Model Name AP6212 Series Model N/A Model Difference N/A Product Description The EUT is a WIFI module Operation Frequency: 802.11b/g/n 20: 2412~2462 MHz Modulation Type: 802.11b(DSSS):CCK,DQPSK,DBPSK 802.11g(OFDM):BPSK,QPSK,16-QAM,64-QAM 802.11n(OFDM):BPSK…

Text truncated - open the document above for the full version.

Page 1 of 2 FCC ID: 2AWVZ-JL500W DTS Setup photo Model name: AP6212 DTS Conduction DTS Radiation L Page 2 of 2 FCC ID: 2AWVZ-JL500W DTS radiation H