2AWYK-D1Mini Sticker Printer, Al Voice Sticker Printer

TCB CALL página 1 File FCC ID: 2BVQN-PU1201 Please upload an exhibit that explains how does the TCB verify the new agent information: 1- Is the address of the agent a valid physical US mailing address (not a US post office box, not a virtual mailbox, not P.O. Boxes, not a vacant lot, not a public building, etc.) ○ We have checked if the address exists in a real and potential building (Google maps) + official US register, after this verification and the evidence below we can guarantee the following: not a US post office box not a virtual mailbox not P.O. Boxes not a vacant lot not a public building(note) ► We checked the FCC FRN Search based on the information provided by the grantee. On the official register from : https://apps.dos.ny.gov/publicInquiry/EntityDisplay Google: TCB CALL página 2 State of New York department of State: TCB CALL página 3 TCB CALL página 4 ► CONCLUSION by TCB: The ASOP defined and provided by grantee is VALID and confirmed. Therefore the exhibit "C5266091_X23_Ed1_US_Agent_Letter" included in the file is ok. 2- Is the agent physically located at that valid US address such that the agent can be legally served at that address? Yes , check above 3- Has the listed agent clearly agreed in writing to serve as the agent for the grantee at that address? Yes, it is included in the exhibit "C5266091_X23_Ed1_US_Agent_Letter"

ZhuhaiXprinterElectronicsTechnologyCo.,Ltd. ReferenceNo.2026UL0244 2.911(d)(7)USAAgentv1.3 Section2.911(d)(7)USAAgentforServiceofProcess Companyname:ZhuhaiXprinterElectronicsTechnologyCo.,Ltd. FCCID:2AWYK-D1 ContactName:XinqiangWang Address:5/F,1stWorkshop,No.613HuaweiRoad,QianshanIndustrialZone, XiangzhouDistrict,ZhuhaiCity,GuangdongProvince,P.R.China TelephoneNo:0756-3895769 Email:[email protected] 2.911(d)(7)USADesignatedAgentforServiceofProcess We,[ZhuhaiXprinterElectronicsTechnologyCo.,Ltd.](“theapplicant”)designate [TTSMARKETINC.] NOTE1 forthepurposeofacceptingserviceofprocessonbehalfof theapplicant. Applicantconsent:WeAcknowledgeourconsenttoacceptserviceofprocessinthe UnitedStatesformattersrelatedtotheapplicableequipment,andatthephysicalU.S. addressandemailaddressofthedesignatedagentandacknowledgeour acceptanceofourobligationtomaintainanagentforserviceofprocessintheUnited Statesfornolessthanoneyearaftereitherthegranteehaspermanentlyterminated allmarketingandimportationoftheapplicableequipmentwithintheU.S.,orthe conclusionofanyCommission-relatedadministrativeorjudicialproceedinginvolving theequipment,whicheverislater. Agentobligation:WeAcknowledgeourobligationtoacceptserviceofprocessinthe UnitedStatesformattersrelatedtotheapplicableequipmentatourphysicalU.S. addressandemailaddressfornolessthanoneyearaftereitherthegranteehas permanentlyterminatedallmarketingandimportationoftheapplicableequipment withintheU.S.,ortheconclusionofanyCommission-relatedadministrativeorjudicial proceedinginvolvingtheequipment,whicheverislater. USAAgent Companyname:TTSMARKETINC. Address:1178BroadwaySte324,NewYork, NY10001,USA FRN:0036806057 ContactName:MaverickLim TelephoneNo: ： 001-(646)305-2908 Email:[email protected] Applicant Companyname:ZhuhaiXprinter ElectronicsTechnologyCo.,Ltd. Address:5/F,1stWorkshop,No.613 HuaweiRoad,QianshanIndustrialZone, XiangzhouDistrict,ZhuhaiCity, GuangdongProvince,P.R.China FCCRegistrationNumber(FRN): 0029777570 ZhuhaiXprinterElectronicsTechnologyCo.,Ltd. ReferenceNo.2026UL0244 2.911(d)(7)USAAgentv1.3 FCCGranteeCode:2AWYK ContactName:XinqiangWang TelephoneNo:0756-3895769 Email:[email protected] Signature: Title:Manager Signature: Title:Manager Date:2026.08.13Date:2026.08.13 NOTE1:AnapplicantlocatedintheUnitedStatesmaydesignateitselfastheagentforservice ofprocess. Reference;FederalRegisterdocument2022-28263publishedon02/06/23 https://www.federalregister.gov/documents/2023/02/06/2022-28263/protecting-against-nation al-security-threats-to-the-communications-supply-chain-through-the

Attestation Statement. Old Code: C5266091 24 New Code: 00015544 Ed.3 Change reason: FRN is added to the Applicant information section. 1/1 TO: Office of Engineering Technology Federal Communications Commission 7435 Oakland Mills Road Columbia, MD 21046 The Commission adopted rules that prohibit equipment authorization for “covered” telecommunications equipment and video surveillance equipment produced by entities identified on the Commission’s Covered List 1 , which is periodically updated. See the Covered List for more details. This Attestation Statement is to confirm that we follow the Section 2.911(d)(5)(i)-(ii) Applicant Company name: Zhuhai Xprinter Electronics Technology Co., Ltd. Grantee code: 2AWYK FCC ID: 2AWYK-D1 FRN: 0029777570 Contact Name: Xinqiang Wang Address: 5/F, 1st Workshop, No.613 Huawei Road, Qianshan Industrial Zone, Xiangzhou District, Zhuhai City, Guangdong Province, P.R.China Fax No:0756-3977067 Email: [email protected] i. [Zhuhai Xprinter Electronics Technology Co., Ltd.] (“the applicant”) certifies that the equipment for which authorization is sought is not “covered” equipment prohibited from receiving an equipment authorization pursuant to section 2.903 of the FCC rules. The applicant must sign this certification. ii. [Zhuhai Xprinter Electronics Technology Co., Ltd.] (“the applicant”) certifies that, as of the date of the filing of the application, the applicant [is not] (as a specifically named entity or any of its subsidiaries or affiliates) identified on the Covered List as an entity producing “covered” equipment. The applicant must sign this certification. [Zhuhai Xprinter Electronics Technology Co., Ltd.] (“the applicant”) certifies that, as of the date of the filing of the application, the applicant [is not] identified on the Covered List as an entity producing “covered” equipment . Date: 2026/08/12 Applicant’s Name: Xinqiang Wang Title: Manager Signature The Commission’s Covered List is published by the Public Safety and Homeland Security Bureau and posted on the Commission’s website. This Covered List, which is periodically updated, identifies particular equipment, produced by particular entities, that constitutes “covered” equipment. https://www.fcc.gov/supplychain/coveredlist

Zhuhai Xprinter Electronics Technology Co., Ltd. Code 00018768 Ed. 1 Device Thermal Label Printer, Thermal Barcode Printer Company name Zhuhai Xprinter Electronics Technology Co., Ltd. Grantee code 2AWYK FCC ID 2AWYK-D1 FRN 0029777570 Contact name Xinqiang Wang Address 5/F, 1st Workshop, No.613 Huawei Road, Qianshan Industrial Zone, Xiangzhou District, Zhuhai City, Guangdong Province, P.R.China Telephone number 0756-3895769 [email protected] Chipset/module information AC7916AB, YC5018 and EG8305 Operating System (if applicable) N/A Storage Capacity (hard drive or other permanent memory storage, if applicable) N/A 2 Item 1. The device is able to install software/program installation? ☐Yes, go to Item 2. ☒No. In this case, the rest of the items do not apply. The device cannot support installation of Kaspersky cybersecurity or anti-virus software. Item 2. Technical Requirements for Kaspersky Cybersecurity Software: # General Requirements (For all Devices) Yes / No or N/A Comments 1 Internet connection for activation and updates (For all Operating Systems) N/A # General Requirements (For Windows Devices) Yes / No or N/A Comments 1 Storage: 1500 MB free space on the hard drive N/A 2 Operating System: Microsoft Windows 8, 8.1, 10 & 11 Home / Pro / Enterprise Microsoft Windows 7 Starter / Home Basic & Premium / Professional / Ultimate SP1 or higher N/A 3 Processor: 1 GHz or higher (P846 or x64) N/A 4 Memory (RAM)1 GB (32-bit) or 2 GB (64-bit) N/A 5 Screen Resolution: Minimum resolution of 1024 x 768 N/A # General Requirements (For macOS devices) Yes / No or N/A Comments 1 Operating System macOS® 13 – 14 N/A 2 Memory (RAM)4 GB N/A 3 Storage: 3455 MB free space on the hard drive N/A 3 # General Requirements (For Android Devices) Yes / No or N/A Comments 1 Storage: 150 MB free space N/A 2 Operating System: Android™ 10 – 14 N/A 3 Screen Resolution: Minimum resolution of 320 x 480 N/A # General Requirements (for iOS devices) Yes / No or N/A Comments 1 Storage: 150 MB free space N/A 2 Operating System: iOS® 17 N/A # General Requirements (For Linux system) Yes / No or N/A Comments 1 Hard drive: 1 GB of free space N/A 2 CPU: Intel Pentium 1 GHz or higher N/A 3 RAM: 1 GB N/A 4 Minimum software requirements: AlmaLinux OS 8 or later; AlterOS 7.5 or later; Astra Linux Common Edition 2.12 or later; CentOS 6.7 or later; Debian GNU/Linux 10.0 or later; EulerOS 2.0 or later; Oracle Linux 7.3 or later ; Red Hat Enterprise Linux 6.7 or later ; Rocky Linux 8.5 or later ; N/A 4 SUSE Linux Enterprise Server 12.5 or later; Ubuntu 12.04 or later ; Uncom OS Home / Business / Education / Enterprise 2.2 or later; ALT Linux Workstaton / Workstation K / Server / Education 8 or later; ROSA Linux Workstation / Server 12 or later ; RED OS 7.3 and later ; After reviewed the technical requirements, is the device capable of supporting the installation of Kaspersky software? ☐Yes, go to Item 3. ☒No. In this case, the rest of the items do not apply. The device cannot support installation of Kaspersky software Item 3. Connectivity Capabilities: # Physical Interface Purpose Justification 1 1 # Wireless Interface Purpose Justification 1 1 After the review of this items, the device: ☒Cannot support installation of any cybersecurity or anti-virus software on the covered list. ☐Potentially can operate with any cybersecurity or anti-virus software on the covered list –additional third-party proof is provided to demonstrate compliance with requirements as of 2.911(d)5(i),(ii) – “Proof of Compliance with Covered List Software Requirements” of this document applies 1 The justification field is used to justify why the software cannot be received through that interface. Check the annex for more indications. 5 Signature: Name: Xinqiang Wang Date: 2026/08/12

Shenzhen Frageway Technology CO.,LTD Product Similarity Declaration Product name: Mini Sticker Printer, AI Voice Sticker Printer Model name: D1, D2, MK1, MK2, GT1, GT2, SK1, SK2, GM1, GM2 FCC ID: 2AWYK-D1 We (Shenzhen Frageway Technology CO.,LTD) hereby state that all the models are electrical identical including the same software parameter and hardware design (i.e., circuit design, PCB Layout, RF module/circuit, antenna type(s) and antenna location, components on PCB, etc.,), same mechanical structure and design (including product enclosure, materials, etc.,), The only difference are the product name and model name. Signature: Name: Xinqing Wang Title: Manager Place, date China, 2026.08.12

C5266091_X10_Ed.2 1/1 < Zhuhai Xprinter Electronics Technology Co., Ltd.> Office of Engineering Technology Federal Communications Commission 7435 Oakland Mills Road Columbia, MD 21046 Date: 2026.08.12 Subject: Request for Confidentiality FCC ID: 2AWYK-D1 To Whom It May Concern, Pursuant to the provisions of Sections 0.457 and 0.459 of Commission's rules (47CFR0.457, 0.459), we are requesting the Commission to withhold the following attachment(s) as confidential document from public disclosure. Exhibits Long-Term Confidentiality Short-Term Confidentiality NOTE 2 ID Label/Location No No Attestation Statement No No External Photos No ☐ Block Diagram ☒ ☐ Schematics ☒ ☐ Test Report No No Test Setup Photos No ☐ User’s Manual ☐ NOTE 1 ☐ Internal Photos ☐ NOTE 1 ☐ Parts List / Tune Up ☐ ☐ RF Exposure Info No No Operational Description ☒ ☐ Cover Letter(s) No No SDR Software / Security Info ☐ No NOTE 1: Long-Term Confidentiality may be permitted under special conditions (See II. LONG-TERM CONFIDENTIALITY, Section 3 of KDB 726920, use last in force) NOTE 2: Short-Term Confidentiality can be requested for a maximum of 180 days from the date of the grant. Above mentioned document contains detailed system and equipment description are considered as proprietary information in operation of the equipment. The public disclosure of above documents might be harmful to our company and would give competitor an unfair advantage in the market. In case of short-term Confidentiality, the applicant requests the exhibits selected above are withheld from public view for a period of ______ days from the date of the Grant of Equipment Authorization and prior to marketing. It is our understanding that all measurement test reports, FCC ID label format and correspondent during certification review process cannot be granted as confidential documents and those information will be available for public review once the grant of equipment authorization is issued. C5266091_X10_Ed.2 1/1 Sincerely, Signature: Name: Xinqiang Wang Title: Manager

C5266091_X8_Ed.1 1/1 Letter of Authorization Company: Zhuhai Xprinter Electronics Technology Co., Ltd. Address: 5/F, 1st Workshop, No.613 Huawei Road, Qianshan Industrial Zone, Xiangzhou District, Zhuhai City, Guangdong Province, P.R.China Product Name: Mini Sticker Printer, Al Voice Sticker Printer Model Number: D1, D2, MK1, MK2, GT1, GT2, SK1, SK2, GM1, GM2 FCC Identifier: 2AWYK-D1 We authorize LGAI Technological Center S.A., Ronda de la Font del Carme, s/n, 08193 Bellaterra, Spain, to act on our behalf on all matters concerning the above named equipment. Any individual within LGAI Technological Center S.A. is authorized to act on our behalf and take action on the application. We declare that authorize LGAI Technological Center S.A., Ronda de la Font del Carme, s/n, 08193 Bellaterra, Spain, is allowed to forward all information related to the approval project to the Federal Communication Commission and to discuss any issues concerning the approval application. Any and all acts carried out by LGAI Technological Center S.A. on our behalf shall have the same effect as acts of our own. Name: Xinqiang Wang Date: 2026.08.12 Title: Manager Signature of applicant:

Page 1 of 4 FCC ID:2AWYK-D1 External Photos Page 2 of 4 Page 3 of 4 Page 4 of 4

Label, Label location

Page 1 of 4 FCC ID:2AWYK-D1 Internal Photos Page 2 of 4 Page 3 of 4 Page 4 of 4

Dongguan Pubiao Testing Technology Co., Ltd Room 101, Building 1, No.30, Minghua Road, Shijie,Shijie Town, Dongguan,Guangdong, 523250,People's Republic of China Tel: +86 769 81813516 E-mail: [email protected] Web: www.pubiaotest.com Page 1 of 6 TEST REPORT Report Number. .................... : EP2606261F04 Date of receipt of test item .. : 2026-07-09 Date (s) of performance of test ......................................... : 2026-07-10 to 2026-08-04 Date of issue ......................... : 2026-08-26 Testing Laboratory name ..... : Dongguan Pubiao Testing Technology Co., Ltd. Address ................................. : Room 101, Building 1, No.30, Minghua Road, Shijie,Shijie Town, Dongguan,Guangdong, 523250,People's Republic of China Applicant’s name .................. : Zhuhai Xprinter Electronics Technology Co., Ltd. Address ................................. : 5/F, 1st Workshop, No.613 Huawei Road, Qianshan Industrial Zone, Xiangzhou District, Zhuhai City, Guangdong Province, P.R.China Manufacturer’s name .......... : Zhuhai Xprinter Electronics Technology Co., Ltd. Address ................................. : 5/F, 1st Workshop, No.613 Huawei Road, Qianshan Industrial Zone, Xiangzhou District, Zhuhai City, Guangdong Province, P.R.China Factory’s name ................... : Zhuhai Xprinter Electronics Technology Co., Ltd. Address ................................. : 5/F, 1st Workshop, No.613 Huawei Road, Qianshan Industrial Zone, Xiangzhou District, Zhuhai City, Guangdong Province, P.R.China Standard(s) ........................... : §15.247(i), §2.1093 Test item description ............ : Mini Sticker Printer, Al Voice Sticker Printer Trade Mark ............................ : N/A Model/Type reference ........... : D1, D2, MK1, MK2, GT1, GT2, SK1, SK2, GM1, GM2 FCC ID ................................... : 2AWYK-D1 Summary of Test Results ..... : Pass Test Report Form No. ........... : §15.247(i), §2.1093 Master TRF ............................ : Dated 2025-11 Prepared by (+signature) ........ : Dora Ning Approved by (+signature) .... : Eric Liu The Summary of Test Results based on a technical opinion belongs to the standard(s). General disclaimer: This report shall not be reproduced except in full, without the written approval of Dongguan Pubiao Testing Technology Co., Ltd. The test results in the report only apply to the tested sample. Report No.: EP2606261F04 Dongguan Pubiao Testing Technology Co., Ltd Room 101, Building 1, No.30, Minghua Road, Shijie,Shijie Town, Dongguan,Guangdong, 523250,People's Republic of China Tel: +86 769 81813516 E-mail: [email protected] Web: www.pubiaotest.com Page 2 of 6 Table of Contents 1. EUT SPECIFICATION ............................................................................................................................... 4 2. TEST REQUIREMENT .............................................................................................................................. 5 3. MEASUREMENT RESULT ........................................................................................................................ 6 Report No.: EP2606261F04 Dongguan Pubiao Testing Technology Co., Ltd Room 101, Building 1, No.30, Minghua Road, Shijie,Shijie Town, Dongguan,Guangdong, 523250,People's Republic of China Tel: +86 769 81813516 E-mail: [email protected] Web: www.pubiaotest.com Page 3 of 6 Modified History Report No. Revision Data Summary EP2606261F04 2026-08-26 Original Version Report No.: EP2606261F04 Dongguan Pubiao Testing Technology Co., Ltd Room 101, Building 1, No.30, Minghua Road, Shijie,Shijie Town, Dongguan,Guangdong, 523250,People's Republic of China Tel: +86 769 81813516 E-mail: [email protected] Web: www.pubiaotest.com Page 4 of 6 1. EUT SPECIFICATION Characteristics Description Product: Mini Sticker Printer,Al Voice Sticker Printer Model Number: D1, D2, MK1, MK2, GT1, GT2, SK1, SK2, GM1, GM2 Difference: All models are identical to each other except for product name and model name. Here we choose D1 as the test EUT. Device Type: Bluetooth V5.2 802.11 WLAN: WiFi:2.4G NFC Data Rate: DSS: 1Mbps for GFSK modulation; DTS: 1Mbps for GFSK modulation WiFi 2.4G: MCS0-MCS7 NFC: ASK Modulation: DSS: GFSK DTS: GFSK WiFi 2.4G: DSSS with DBPSK/DQPSK/CCK for 802.11b; OFDM with BPSK/QPSK/16QAM/64QAM for 802.11g/n; Operating Frequency Range(s) : 2402-2480MHz 13.56MHz Number of Channels: BT: 79 channels BLE: 40 channels WiFi 2.4G: 11 channels NFC: 1 channel Transmit Power Max: BT: 4.50 dBm BLE: 3.39 dBm WiFi 2.4G: 6.50 dBm NFC: -34.28 dBm Antenna Gain: 2.46 dBi for 2402-2480MHz 0 dBi for 13.56MHz Power supply: DC 3.7V from Battery DC 5V from USB Evaluation applied: MPE Evaluation SAR Evaluation Report No.: EP2606261F04 Dongguan Pubiao Testing Technology Co., Ltd Room 101, Building 1, No.30, Minghua Road, Shijie,Shijie Town, Dongguan,Guangdong, 523250,People's Republic of China Tel: +86 769 81813516 E-mail: [email protected] Web: www.pubiaotest.com Page 5 of 6 2. TEST REQUIREMENT RF EXPOSURE EVALUATION According to §15.247(i) and §1.1307(b)(1), systems operating under the provisions of this section shall be operated in a manner that ensures that the public is not exposed to radio frequency energy level in excess of the Commission’s guidelines. . Routine SAR evaluation refers to that specifically required by §2.1093, using measurements or computer simulation. When routine SAR evaluation is not required, portable transmitters with output power greater than the applicable low threshold require SAR evaluation to quality for TCB approval. One antenna is available for the EUT. The minimum separation distance is 5mm. Report No.: EP2606261F04 Dongguan Pubiao Testing Technology Co., Ltd Room 101, Building 1, No.30, Minghua Road, Shijie,Shijie Town, Dongguan,Guangdong, 523250,People's Republic of China Tel: +86 769 81813516 E-mail: [email protected] Web: www.pubiaotest.com Page 6 of 6 3. MEASUREMENT RESULT modulation Transmit Frequency (MHz) Mea…

Text truncated - open the document above for the full version.

Dongguan Pubiao Testing Technology Co., Ltd Room 101, Building 1, No.30, Minghua Road, Shijie,Shijie Town, Dongguan,Guangdong, 523250,People's Republic of China Tel: +86 769 81813516 E-mail: [email protected] Web: www.pubiaotest.com Page 1 of 37 TEST REPORT Report Number. .................... : EP2606261F02 Date of receipt of test item .. : 2026-07-09 Date (s) of performance of test ......................................... : 2026-07-10 to 2026-08-04 Date of issue ......................... : 2026-08-26 Testing Laboratory name ..... : Dongguan Pubiao Testing Technology Co., Ltd. Address ................................. : Room 101, Building 1, No.30, Minghua Road, Shijie,Shijie Town, Dongguan,Guangdong, 523250,People’s Republic of China Applicant’s name .................. : Zhuhai Xprinter Electronics Technology Co., Ltd. Address ................................. : 5/F, 1st Workshop, No.613 Huawei Road, Qianshan Industrial Zone, Xiangzhou District, Zhuhai City, Guangdong Province, P.R.China Manufacturer’s name .......... : Zhuhai Xprinter Electronics Technology Co., Ltd. Address ................................. : 5/F, 1st Workshop, No.613 Huawei Road, Qianshan Industrial Zone, Xiangzhou District, Zhuhai City, Guangdong Province, P.R.China Factory’s name .................... : Zhuhai Xprinter Electronics Technology Co., Ltd. Address ................................. : 5/F, 1st Workshop, No.613 Huawei Road, Qianshan Industrial Zone, Xiangzhou District, Zhuhai City, Guangdong Province, P.R.China Standard(s) ........................... : FCC 47 CFR Part 15, Subpart C Test item description ........... : Mini Sticker Printer, Al Voice Sticker Printer Trade Mark ............................ : N/A Model/Type reference ........... : D1, D2, MK1, MK2, GT1, GT2, SK1, SK2, GM1, GM2 FCC ID ................................... : 2AWYK-D1 Summary of Test Results ..... : Pass Test Report Form No. ........... : 47 CFR Parts 15 C Master TRF ............................ : Dated 2025-11 Prepared by (+signature) ........ : Dora Ning Approved by (+signature) .... : Eric Liu The Summary of Test Results based on a technical opinion belongs to the standard(s). General disclaimer: This report shall not be reproduced except in full, without the written approval of Dongguan Pubiao Testing Technology Co., Ltd. The test results in the report only apply to the tested sample. Report No.: EP2606261F02 Dongguan Pubiao Testing Technology Co., Ltd Room 101, Building 1, No.30, Minghua Road, Shijie,Shijie Town, Dongguan,Guangdong, 523250,People's Republic of China Tel: +86 769 81813516 E-mail: [email protected] Web: www.pubiaotest.com Page 2 of 37 Table of Contents 1 EUT TECHNICAL DESCRIPTION ............................................................................................................ 4 2 SUMMARY OF TEST RESULT ................................................................................................................. 5 3 TEST METHODOLOGY ............................................................................................................................ 6 3.1 GENERAL DESCRIPTION OF APPLIED STANDARDS .................................................................... 6 3.2 MEASUREMENT EQUIPMENT USED .............................................................................................. 6 3.3 DESCRIPTION OF TEST MODES ..................................................................................................... 7 4 FACILITIES AND ACCREDITATIONS ...................................................................................................... 8 4.1 FACILITIES ......................................................................................................................................... 8 4.2 LABORATORY ACCREDITATIONS AND LISTINGS .......................................................................... 8 5 TEST SYSTEM UNCERTAINTY ............................................................................................................... 8 6 SETUP OF EQUIPMENT UNDER TEST ................................................................................................... 9 6.1 RADIO FREQUENCY TEST SETUP 1 ............................................................................................... 9 6.2 RADIO FREQUENCY TEST SETUP 2 ............................................................................................... 9 7 TEST REQUIREMENTS .......................................................................................................................... 13 7.1 DTS 6DB BANDWIDTH .................................................................................................................... 13 7.2 MAXIMUM PEAK CONDUCTED OUTPUT POWER ........................................................................ 16 7.3 MAXIMUM POWER SPECTRAL DENSITY ..................................................................................... 20 7.4 CONDUCT BAND EDGE AND SPURIOUS EMISSIONS MEASUREMENT .................................... 23 7.5 RADIATED SPURIOUS EMISSION ................................................................................................. 29 7.6 CONDUCTED EMISSION TEST ...................................................................................................... 36 7.7 ANTENNA APPLICATION ................................................................................................................ 37 Report No.: EP2606261F02 Dongguan Pubiao Testing Technology Co., Ltd Room 101, Building 1, No.30, Minghua Road, Shijie,Shijie Town, Dongguan,Guangdong, 523250,People's Republic of China Tel: +86 769 81813516 E-mail: [email protected] Web: www.pubiaotest.com Page 3 of 37 Modified Information Report No. Revision Data Summary EP2606261F02 2026-08-26 Original Version Report No.: EP2606261F02 Dongguan Pubiao Testing Technology Co., Ltd Room 101, Building 1, No.30, Minghua Road, Shijie,Shijie Town, Dongguan,Guangdong, 523250,Pe…

Text truncated - open the document above for the full version.

Bluetooth Antenna specification &Test report Project Name:D1 Antenna frequency band：2.4G Test time:2026/06/23 Manufacturer:ZHUHAI JIELI TECHNOLOGY CO., LTD. Adress: 333 Kexing Rd, Xiangzhou District, Zhuhai City, Guangdong Province, China Antenna testing environment: Antenna testing parameters： Antenna darkroom test data: Horizontal ， 屯 , JO ／ ,OO \ I 印 ： ／ L志�.I rro I ｀ 刀 ＼ 1”L. 1 .. , 210 ． ． 1从I l Horizontal 2400.000I.忱 bll !IO 170 500 均 `00 ,1 30 印 10 210 150 ＿ 180 l 二 ： 1 f . OO ， JO '' 产 \ 1印 的 卫 N I / � \ 印；（切。 ， l \ / ' f \ ¥ 2 1 0 止 ， f t ＼ ＼ 叩 l ,80 Antenna size:

Dongguan Pubiao Testing Technology Co., Ltd Room 101, Building 1, No.30, Minghua Road, Shijie,Shijie Town, Dongguan,Guangdong, 523250,People's Republic of China Tel: +86 769 81813516 E-mail: [email protected] Web: www.pubiaotest.com Page 1 of 50 TEST REPORT Report Number. ..................... : EP2606261F03 Date of receipt of test item ... : 2026-07-09 Date (s) of performance of test ......................................... : 2026-07-10 to 2026-08-04 Date of issue ......................... : 2026-08-26 Testing Laboratory name ..... : Dongguan Pubiao Testing Technology Co., Ltd. Address ................................. : Room 101, Building 1, No.30, Minghua Road, Shijie,Shijie Town, Dongguan,Guangdong, 523250,People's Republic of China Applicant’s name .................. : Zhuhai Xprinter Electronics Technology Co., Ltd. Address ................................. : 5/F, 1st Workshop, No.613 Huawei Road, Qianshan Industrial Zone, Xiangzhou District, Zhuhai City, Guangdong Province, P.R.China Manufacturer’s name ........... : Zhuhai Xprinter Electronics Technology Co., Ltd. Address ................................. : 5/F, 1st Workshop, No.613 Huawei Road, Qianshan Industrial Zone, Xiangzhou District, Zhuhai City, Guangdong Province, P.R.China Factory’s name .................... : Zhuhai Xprinter Electronics Technology Co., Ltd. Address ................................. : 5/F, 1st Workshop, No.613 Huawei Road, Qianshan Industrial Zone, Xiangzhou District, Zhuhai City, Guangdong Province, P.R.China Standard(s) ............................ : FCC 47 CFR Part 2, Subpart J FCC 47 CFR Part 15, Subpart C Test item description ............ : Mini Sticker Printer, Al Voice Sticker Printer Trade Mark ............................. : N/A Model/Type reference ........... : D1, D2, MK1, MK2, GT1, GT2, SK1, SK2, GM1, GM2 FCC ID .................................... : 2AWYK-D1 Summary of Test Results ..... : Pass Test Report Form No. ........... : 47 CFR Parts 15 C Master TRF ............................ : Dated 2025-11 Prepared by (+signature) ........ : Dora Ning Approved by (+signature) .... : Eric Liu The Summary of Test Results based on a technical opinion belongs to the standard(s). General disclaimer: This report shall not be reproduced except in full, without the written approval of Dongguan Pubiao Testing Technology Co., Ltd. The test results in the report only apply to the tested sample. Report No.: EP2606261F03 Dongguan Pubiao Testing Technology Co., Ltd Room 101, Building 1, No.30, Minghua Road, Shijie,Shijie Town, Dongguan,Guangdong, 523250,People's Republic of China Tel: +86 769 81813516 E-mail: [email protected] Web: www.pubiaotest.com Page 2 of 50 TABLE OF CONTENTS 1 EUT TECHNICAL DESCRIPTION ............................................................................................................ 4 2 SUMMARY OF TEST RESULT ................................................................................................................. 5 3 TEST METHODOLOGY ............................................................................................................................ 6 3.1 GENERAL DESCRIPTION OF APPLIED STANDARDS .................................................................... 6 3.2 MEASUREMENT EQUIPMENT USED ..................................................................................…

Text truncated - open the document above for the full version.