2AX2URW101RGLLTE Module

Applicant Declaration QSF27-14-04 Rev 1.1 Jan 17, 2024 Page 1 of 1 Original Issue: Jan. 4, 2021 SGS North America Inc. 620 Old Peachtree Road SUITE 100 Suwanee, Georgia 30024 United States Applicant Legal Business Name Rolling Wireless S.a r.l. Address 8-10 rue Mathias Hardt 1717 Luxembourg 1717 FRN 0030146674 Grantee Code 2AX2U FCC ID 2AX2URW101RGL Authorized Contact Name Wilson Lin Contact Email [email protected] Contact Phone +86-755-8611-9834 I, the undersigned, certify that I am an authorized signatory for the Applicant and therefore declare; a) in accordance with 47CFR2.911(d), all of the statements herein and the exhibits attached hereto are true and correct to the best of my knowledge and belief. b) in accepting a Grant of Equipment Authorization issued by a TCB, under the authority of the FCC, as a result of the representations made in this application, the Applicant is responsible for: (1) labeling the equipment with the exact FCC ID as specified in this application, (2) compliance statement labeling pursuant to the applicable rules, (3) compliance of the equipment with the applicable technical rules, c) if the Applicant is not the actual manufacturer of the equipment, appropriate arrangements have been made with the manufacturer to ensure that production units of this equipment will continue to comply with the FCC’s technical requirements. d) in accordance with 47 CFR 2.909 and KDB394321, the Applicant has read, understood and agrees to accept that they are the responsible party and agree to abide by their responsibilities as specified under 47 CFR 2.909 and KDB394321. e) in accordance with ISO 17065, FCC KDB641163, FCC KDB610077, KDB394321 and RSP-100, the Applicant has read, understood, accepts and agrees to abide by the post market surveillance requirements. (1) the Applicant understands, accepts and agrees that a sample may be requested for surveillance testing. (2) the Applicant shall make provisions to always have a production sample available upon request by SGS, FCC and/or ISED. (3) the Applicant shall, upon request by SGS, at the Applicant’s expense, provide a production sample of the requested product to SGS, FCC and/or ISED as instructed. The sample shall include all support devices, cables, software, accessories or other hardware or software required for evaluation, review, certification and audit surveillance of products certified by SGS. f) neither the Applicant nor any party to the application is subject to a denial of Federal benefits, that includes FCC benefits, pursuant to Section 5301 of the Anti-Drug Abuse Act of 1988, 21 U.S.C. §862 because of a conviction for possession or distribution of a controlled substance. See 47CFR 1.2002(b) for the definition of a “party” for these purposes. g) the Applicant has read, understood, accepts and agrees to abide by the SGS North America, Inc.(TCB) terms and conditions. Link to CFRs: https://www.fcc.gov/wireless/bureau-divisions/technologies-systems-and-innovation-division/rules-regulations-title-47 Link to KDBs: https://apps.fcc.gov/oetcf/kdb/index.cfm Link to RSP-100: https://www.ic.gc.ca/eic/site/smt-gst.nsf/eng/sf01130.html Link to the Covered List: Covered List [Rolling Wireless S.a r.l.] (“the applicant”) certifies that the equipment for which authorization is sought is not “covered” equipment prohibited from receiving an equipment authorization pursuant to section 2.903 of the FCC rules. [Rolling Wireless S.a r.l.] (“the applicant”) certifies that, as of the date of the filing of the application, the applicant [is not] identified on the Covered list, established pursuant to §1.50002, as an entity producing “covered” equipment. Applicant Signature: Date: 2024/07/30 Print Name: Wilson Lin Title: Certification Manager *NOTE: This declaration cannot be signed by an Agent, it shall be signed by an authorized person listed in the FCC database

Date: 2024/07/30 TO: Federal Communication Commission Equipment Authorization Branch 7435 Oakland Mills Road Columbia, MID 21046 Regarding: FCC ID: 2AX2URW101RGL To whom it may concern: We, the undersigned, hereby authorize SGS-CSTC Standards Technical Services Co., Ltd. to act on our behalf in all manners relating to application for equipment authorization with respect to the FCC ID above, including signing of all documents relating to these matters. Any and all acts carried out by the agent on our behalf shall have the same effect as acts of our own. We, the undersigned, hereby certify that we are not subject to a denial of federal benefits, that includes FCC benefits, pursuant to Section 5301 of the Anti-Drug Abuse Act of 1988, 21 U.S.C. 853(a). Where our agent signs the application for certification on our behalf, I acknowledge that all responsibility for complying with the terms and conditions for Certification, as specified by SGS North America, Inc., still resides with Rolling Wireless S.a r.l. This authorization is valid until further written notice from the applicant. Sincerely, Print Name: Wilson Lin Title: Certification Manager Signature: On behalf of Company: Rolling Wireless S.a r.l. Telephone: +86-755-8611-9834 E-mail: [email protected]

Date:2024/07/30 TO: Federal Communication Commission Equipment Authorization Branch 7435 Oakland Mills Road Columbia, MID 21046 Regarding: Confidentiality Request regarding application for FCC ID: 2AX2URW101RGL LONG TERM CONFIDENTIALITY Pursuant to 47 CFR Section 0.459 and 0.457 of the commission’s rules, the applicant hereby request confidential treatment of the documents listed below, associated with the certification application referenced above. Schematic(s) Block Diagrams Operational Descriptions BOM Tune Up The documents above contain proprietary information not released to the public. Public disclosure of this information may prove harmful to the business of the applicant. SHORT TERM CONFIDENTIALITY Additionally, the applicant requests the following documents be held confidential until the device is marketed or 180 days from the grant date, whichever is less. If the device is marketed within aforementioned days of the Grant Date, the applicant will notify the TCB per FCC KDB 726920 D01 Confidentiality Request Procedures. External Photos Internal Photos Test Setup Photos User manual(s) Sincerely, Print Name: Wilson Lin Title: Certification Manager Signature: On behalf of Company: Rolling Wireless S.a r.l. Telephone: +86-755-8611-9834 E-mail: [email protected]

Cover Letter-Modular Approval FCC ID:2AX2URW101RGL Date: 2024/07/30 Gentlemen: There’s an Module that would like to have your authorization as a modular approval. The specific product as below, Module with its designed features and specified description, meets special requirements for Full modular approval on FCC KDB996369 by cross-reference list below. Company Rolling Wireless S.a r.l. Model Name LTE Module Model Number RW101R-GL FCC ID 2AX2URW101RGL Requirement of FCC KDB996369 Comply（Y/N） 1. The modular transmitter must have its own RF shielding. Y The EUT provides the RF shielding. See EUT photo. 2. The modular transmitter must have buffered modulation/data inputs (if such inputs are provided) to ensure that the module will comply with Part 15 requirements under conditions of excessive data rates or over-modulation. Y The EUT has its buffered modulation. Please see the Schematic Diagram. 3. The modular transmitter must have its own power supply regulation. Y The EUT has its own power supply regulation, please see the Schematic Diagram. 4. The modular transmitter must comply with the antenna and transmission system requirements of Sections 15.203, 15.204(b) and 15.204(c). The antenna must either be permanently attached or employ a “unique” antenna coupler (at all connections between the module and the antenna, including the cable). The “professional installation” provision of Section 15.203 is not applicable to modules but can apply to limited modular approvals under paragraph (b) of this section. Y The EUT meets the FCC antenna requirements. 5. The modular transmitter must be tested in a stand -alone configuration, i.e., the module must not be inside another device during testing. Y The EUT was tested with a test board, Please see test report and setup photo 6. The modular transmitter must be labeled with its own FCC ID number, and, if the FCC ID is not visible when the module is installed inside another device, then the outside of the device into which the module is installed must also display a label Y Please see exhibition label sample for the FCC ID of this module. And also in the exhibition Users manual, there are instructions give to the OEM on how to label the end product. referring to the enclosed module. This exterior label can use wording such as the following: “Contains Transmitter Module FCC ID” or “Contains FCC ID” Any similar wording that expresses the same meaning may be used. The Grantee may either provide such a label, an example of which must be included in the application for equipment authorization, or, must provide adequate instructions along with the module which explain this requirement. In the latter case, a copy of these instructions must be included in the application for equipment authorization. 7. The modular transmitter must comply with any specific rule or operating requirements applicable to the transmitter and the manufacturer must provide adequate instructions along with the module to explain any such requirements. A copy of these instructions must be included in the application for equipment authorization. Y The EUT is compliant with all applicable FCC rules. Details instructions for maintaining compliance are give in the User Manual. 8. The modular transmitter must comply with any applicable RF exposure requirements. For example, FCC Rules in Sections 2.1091, 2.1093 and specific sections of Part 15, including 15.319(i), 15.407(f), 15.253(f) and 15.255(g), require that Unlicensed PCS, UNII and millimeter wave devices perform routine environmental evaluation for RF Exposure to demonstrate compliance. In ad dition, spread spectrum transmitters operating under Section 15.247 are required to address RF Exposure compliance in accordance with Section 15.247(b)(4). Y The EUT complies with RF exposure requirement. Thank you. Sincerely, Print Name: Wilson Lin Title: Certification Manager Signature: On behalf of Company: Rolling Wireless S.a r.l. Telephone: +86-755-8611-9834 E-mail: [email protected]

Label Label Location On the top of the EUT

SGS-CSTC Standards Technical Services Co., Ltd. Shenzhen Branch SZEMC-TRF-01 Rev. A/1 Report No.: SZCR240700251803 Page: 1 of 7 Keny Xu EMC Laboratory Manager TEST REPORT Application No.: SZCR2407002518MO Applicant: Rolling Wireless S.a r.l. Address of Applicant: 8-10, rue Mathias Hardt 1717, Luxembourg Manufacturer: Rolling Wireless S.a r.l. Address of Manufacturer: 8-10, rue Mathias Hardt 1717, Luxembourg EUT Description: LTE Module Model No.: RW101R-GL Trade Mark: Rolling Wireless FCC ID: 2AX2URW101RGL Standards: FCC 47 CFR Part 2.1091 FCC KDB 447498 D01 v06 Date of Receipt: 2024-07-01 Date of Issue: 2024-07-26 Test Result: PASS* * In the configuration tested, the EUT complied with the standards specified above. SGS-CSTC Standards Technical Services Co., Ltd. Shenzhen Branch SZEMC-TRF-01 Rev. A/1 Report No.: SZCR240700251803 Page: 2 of 7 1 Version Revision Record Version Chapter Date Modifier Remark 01 2024-07-26 Original Authorized for issue by: Donjon Huang/Project Engineer Eric Fu/Reviewer SGS-CSTC Standards Technical Services Co., Ltd. Shenzhen Branch SZEMC-TRF-01 Rev. A/1 Report No.: SZCR240700251803 Page: 3 of 7 Contents 1 Version ......................................................................................................................... 2 2 General Information ...................................................................................................... 4 2.1 Client Information .................................................................................................. 4 2.2 Test Facility ........................................................................................................... 4 2.3 General Description of EUT ................................................................................... 5 3 RF Exposure Evaluation ............................................................................................... 6 3.1 RF Exposure Compliance Requirement ................................................................ 6 SGS-CSTC Standards Technical Services Co., Ltd. Shenzhen Branch SZEMC-TRF-01 Rev. A/1 Report No.: SZCR240700251803 Page: 4 of 7 2 General Information 2.1 Client Information Applicant: Rolling Wireless S.a r.l. Address of Applicant: 8-10, rue Mathias Hardt 1717, Luxembourg Manufacturer: Rolling Wireless S.a r.l. Address of Manufacturer: 8-10, rue Mathias Hardt 1717, Luxembourg 2.2 Test Facility The test facility is recognized, certified, or accredited by the following organizations: • A2LA (Certificate No. 3816.01) SGS-CSTC Standards Technical Services Co., Ltd., Shenzhen EMC Laboratory is accredited by the American Association for Laboratory Accreditation(A2LA). Certificate No. 3816.01. • VCCI (Member No. 1937) The 3m Fully-anechoic chamber for above 1GHz, 10m Semi-anechoic chamber for below 1GHz, Shielded Room for Mains Port Conducted Interference Measurement and Telecommunication Port Conducted Interference Measurement of SGS-CSTC Standards Technical Services Co., Ltd. Shenzhen EMC laboratory have been registered in accordance with the Regulations for Voluntary Control Measures with Registration No.: G-20026, R-14188, C-12383 and T-11153 respectively. • FCC –Designation Number: CN1336 SGS-CSTC Standards Technical Services Co., Ltd., Shenzhen EMC Laboratory has been recognized as an accredited testing laboratory. Designation Number: CN1336. Test Firm Registration Number: 787754. • Innovation, Science and Economic Development Canada SGS-CSTC Standards Technical Services Co., Ltd., Shenzhen EMC Laboratory has been recognized by ISED as an accredited testing laboratory. CAB identifier: CN0006. IC#: 4620C. SGS-CSTC Standards Technical Services Co., Ltd. Shenzhen Branch SZEMC-TRF-01 Rev. A/1 Report No.: SZCR240700251803 Page: 5 of 7 2.3 General Description of EUT EUT Description: LTE Module Model No.: RW101R-GL Trade Mark: Rolling Wireless Hardware Version: V1.4 Software Version: 19512.9000.00.11.02.02 Power Supply: DC 3.3V Antenna Type: External, Integrated Antenna Gain: WCDMA Band II: 4dBi WCDMA Band IV: 3dBi WCDMA Band V: 3dBi LTE Band 2: 4dBi LTE Band 4: 3dBi LTE Band 5: 3dBi LTE Band 7: 4dBi LTE Band 12: 3dBi LTE Band 13: 3dBi LTE Band 14: 3dBi LTE Band 17: 3dBi LTE Band 25: 4dBi LTE Band 26: 3dBi LTE Band 30: 1dBi LTE Band 38: 4dBi LTE Band 41: 4dBi LTE Band 48: 1dBi LTE Band 66: 3dBi LTE Band 71: 3dBi Note: The antenna gain are derived from the gain information report provided by the manufacturer. Remark: As above information is provided and confirmed by the applicant. SGS is not liable to the accuracy, suitability, reliability or/and integrity of the information. SGS-CSTC Standards Technical Services Co., Ltd. Shenzhen Branch SZEMC-TRF-01 Rev. A/1 Report No.: SZCR240700251803 Page: 6 of 7 3 RF Exposure Evaluation 3.1 RF Exposure Compliance Requirement 3.1.1 Limits Frequency range (MHz) Electric field strength (V/m) Magnetic field strength (A/m) Power density (mW/cm2) Averaging time (minutes) (A) Limits for Occupational/Controlled Exposures 0.3-3.0 614 1.63 *(100) 6 3.0-30 1842/f 4.89/f *(900/f2) 6 30-300 61.4 0.163 1.0 6 300-1500 / / f/300 6 1500-100,000 / / 5 6 (B) Limits for General Population/Uncontrolled Exposure 0.3-1.34 614 1.63 *(100) 30 1.34-30 824/f 2.19/f *(180/f2) 30 30-300 27.5 0.073 0.2 30 300-1500 / / f/1500 30 1500-100,000 / / 1.0 30 F=frequency in MHz *=Plane-wave equivalent power density RF exposure compliance will need to be determined with respect to 1.1307(c) and (d) of the FCC rules. The emissions should be within the limits at 300kHz in Table 1 of 1.1310(use the 300kHz limits for 150kHz:614V/m,1.63A/m). Friis Formula Friis transmission formula: Pd = (Pout*G)/(4* Pi * R 2 ) Where Pd = power density in mW/cm2 Pout = output power to antenna in mW G = gain of antenna in linear scale Pi = 3.1416 R = distance between observation point and center of the radiator in cm Pd id the limit of MPE, 1 mW/cm2. If we know the maximum gain of the antenna and the total power input to the antenna, through the calc…

Text truncated - open the document above for the full version.

Report No.: 02518MO Page 1 / 192 1. Effective (Isotropic) Radiated Power Output Data 1.1 Test Result 1.1.1 B48_5MHz_EIRP Band: 48 / Bandwidth: 5MHz / NTNV Modulation Frequency (MHz) RB Allocation Conducted Power (dBm) Gain (dBi) EIRP (dBm) Verdict Size Offset Result Limit QPSK 3552.5 1 0 21.53 1.00 22.53 / Pass 13 21.65 1.00 22.65 / Pass 24 21.58 1.00 22.58 / Pass 12 0 20.63 1.00 21.63 / Pass 6 20.64 1.00 21.64 / Pass 13 20.57 1.00 21.57 / Pass 25 0 20.56 1.00 21.56 / Pass 3625 1 0 21.49 1.00 22.49 / Pass 13 21.50 1.00 22.50 / Pass 24 21.32 1.00 22.32 / Pass 12 0 20.43 1.00 21.43 / Pass 6 20.44 1.00 21.44 / Pass 13 20.40 1.00 21.40 / Pass 25 0 20.41 1.00 21.41 / Pass 3697.5 1 0 21.66 1.00 22.66 / Pass 13 21.62 1.00 22.62 / Pass 24 21.47 1.00 22.47 / Pass 12 0 20.66 1.00 21.66 / Pass 6 20.61 1.00 21.61 / Pass 13 20.61 1.00 21.61 / Pass 25 0 20.62 1.00 21.62 / Pass 16QAM 3552.5 1 0 20.54 1.00 21.54 / Pass 13 20.63 1.00 21.63 / Pass 24 20.49 1.00 21.49 / Pass 12 0 19.70 1.00 20.70 / Pass 6 19.58 1.00 20.58 / Pass 13 19.61 1.00 20.61 / Pass 25 0 19.59 1.00 20.59 / Pass 3625 1 0 20.43 1.00 21.43 / Pass 13 20.26 1.00 21.26 / Pass 24 20.34 1.00 21.34 / Pass 12 0 19.43 1.00 20.43 / Pass 6 19.47 1.00 20.47 / Pass 13 19.48 1.00 20.48 / Pass 25 0 19.57 1.00 20.57 / Pass 3697.5 1 0 20.48 1.00 21.48 / Pass 13 20.83 1.00 21.83 / Pass 24 20.56 1.00 21.56 / Pass 12 0 19.74 1.00 20.74 / Pass 6 19.73 1.00 20.73 / Pass 13 19.67 1.00 20.67 / Pass 25 0 19.73 1.00 20.73 / Pass Note1: EIRP=Conducted Power+Antenna Gain 1.1.2 B48_5MHz_EIRP/10MHz Report No.: 02518MO Page 2 / 192 Band: 48 / Bandwidth: 5MHz / NTNV Modulation Frequency (MHz) RB Allocation Conducted Power (dBm/10MHz) Gain (dBi) EIRP/10MHz (dBm/10MHz) Verdict Size Offset Result Limit QPSK 3552.5 1 0 20.47 1.00 21.47 <=23 Pass 13 21.10 1.00 22.10 <=23 Pass 24 20.65 1.00 21.65 <=23 Pass 12 0 19.49 1.00 20.49 <=23 Pass 6 19.81 1.00 20.81 <=23 Pass 13 19.38 1.00 20.38 <=23 Pass 25 0 19.63 1.00 20.63 <=23 Pass 3625 1 0 20.57 1.00 21.57 <=23 Pass 13 20.71 1.00 21.71 <=23 Pass 24 20.48 1.00 21.48 <=23 Pass 12 0 19.68 1.00 20.68 <=23 Pass 6 19.63 1.00 20.63 <=23 Pass 13 19.85 1.00 20.85 <=23 Pass 25 0 19.77 1.00 20.77 <=23 Pass 3697.5 1 0 20.62 1.00 21.62 <=23 Pass 13 20.61 1.00 21.61 <=23 Pass 24 20.58 1.00 21.58 <=23 Pass 12 0 19.88 1.00 20.88 <=23 Pass 6 19.57 1.00 20.57 <=23 Pass 13 19.64 1.00 20.64 <=23 Pass 25 0 19.75 1.00 20.75 <=23 Pass 16QAM 3552.5 1 0 19.47 1.00 20.47 <=23 Pass 13 19.76 1.00 20.76 <=23 Pass 24 19.66 1.00 20.66 <=23 Pass 12 0 18.78 1.00 19.78 <=23 Pass 6 18.78 1.00 19.78 <=23 Pass 13 18.72 1.00 19.72 <=23 Pass 25 0 18.81 1.00 19.81 <=23 Pass 3625 1 0 20.02 1.00 21.02 <=23 Pass 13 19.85 1.00 20.85 <=23 Pass 24 19.58 1.00 20.58 <=23 Pass 12 0 18.83 1.00 19.83 <=23 Pass 6 18.72 1.00 19.72 <=23 Pass 13 18.96 1.00 19.96 <=23 Pass 25 0 18.83 1.00 19.83 <=23 Pass 3697.5 1 0 20.33 1.00 21.33 <=23 Pass 13 19.71 1.00 20.71 <=23 Pass 24 20.35 1.00 21.35 <=23 Pass 12 0 18.59 1.00 19.59 <=23 Pass 6 18.52 1.00 19.52 <=23 Pass 13 18.58 1.00 19.58 <=23 Pass 25 0 18.74 1.00 19.74 <=23 Pass Note1: EIRP/10MHz=Conducted Power+Antenna Gain-2.15 1.1.3 B48_10MHz_EIRP Band: 48 / Bandwidth: 10MHz / NTNV Modulation Frequency (MHz) RB Allocation Conducted Power (dBm) Gain (dBi) EIRP (dBm) Verdict Size Offset Result Limit QPSK 3555 1 0 21.58 1.00 22.58 / Pass 25 21.35 1.00 22.35 / Pass 49 21.69 1.00 22.69 / Pass Report No.: 02518MO Page 3 / 192 25 0 20.71 1.00 21.71 / Pass 13 20.73 1.00 21.73 / Pass 25 20.70 1.00 21.70 / Pass 50 0 20.72 1.00 21.72 / Pass 3625 1 0 21.51 1.00 22.51 / Pass 25 21.43 1.00 22.43 / Pass 49 21.28 1.00 22.28 / Pass 25 0 20.53 1.00 21.53 / Pass 13 20.43 1.00 21.43 / Pass 25 20.45 1.00 21.45 / Pass 50 0 20.48 1.00 21.48 / Pass 3695 1 0 21.57 1.00 22.57 / Pass 25 21.64 1.00 22.64 / Pass 49 21.58 1.00 22.58 / Pass 25 0 20.72 1.00 21.72 / Pass 13 20.65 1.00 21.65 / Pass 25 20.70 1.00 21.70 / Pass 50 0 20.74 1.00 21.74 / Pass 16QAM 3555 1 0 20.53 1.00 21.53 / Pass 25 20.56 1.00 21.56 / Pass 49 20.41 1.00 21.41 / Pass 25 0 19.71 1.00 20.71 / Pass 13 19.74 1.00 20.74 / Pass 25 19.66 1.00 20.66 / Pass 50 0 19.68 1.00 20.68 / Pass 3625 1 0 20.53 1.00 21.53 / Pass 25 20.43 1.00 21.43 / Pass 49 20.45 1.00 21.45 / Pass 25 0 19.56 1.00 20.56 / Pass 13 19.49 1.00 20.49 / Pass 25 19.49 1.00 20.49 / Pass 50 0 19.45 1.00 20.45 / Pass 3695 1 0 20.61 1.00 21.61 / Pass 25 20.51 1.00 21.51 / Pass 49 20.60 1.00 21.60 / Pass 25 0 19.84 1.00 20.84 / Pass 13 19.75 1.00 20.75 / Pass 25 19.73 1.00 20.73 / Pass 50 0 19.37 1.00 20.37 / Pass Note1: EIRP=Conducted Power+Antenna Gain 1.1.4 B48_10MHz_EIRP/10MHz Band: 48 / Bandwidth: 10MHz / NTNV Modulation Frequency (MHz) RB Allocation Conducted Power (dBm/10MHz) Gain (dBi) EIRP/10MHz (dBm/10MHz) Verdict Size Offset Result Limit QPSK 3555 1 0 20.84 1.00 21.84 <=23 Pass 25 20.22 1.00 21.22 <=23 Pass 49 20.97 1.00 21.97 <=23 Pass 25 0 19.88 1.00 20.88 <=23 Pass 13 19.99 1.00 20.99 <=23 Pass 25 20.37 1.00 21.37 <=23 Pass 50 0 20.03 1.00 21.03 <=23 Pass 3625 1 0 20.85 1.00 21.85 <=23 Pass 25 20.79 1.00 21.79 <=23 Pass Report No.: 02518MO Page 4 / 192 49 20.95 1.00 21.95 <=23 Pass 25 0 19.90 1.00 20.90 <=23 Pass 13 19.93 1.00 20.93 <=23 Pass 25 20.00 1.00 21.00 <=23 Pass 50 0 19.88 1.00 20.88 <=23 Pass 3695 1 0 21.01 1.00 22.01 <=23 Pass 25 20.78 1.00 21.78 <=23 Pass 49 20.70 1.00 21.70 <=23 Pass 25 0 19.98 1.00 20.98 <=23 Pass 13 19.89 1.00 20.89 <=23 Pass 25 19.86 1.00 20.86 <=23 Pass 50 0 19.93 1.00 20.93 <=23 Pass 16QAM 3555 1 0 19.88 1.00 20.88 <=23 Pass 25 19.60 1.00 20.60 <=23 Pass 49 20.02 1.00 21.02 <=23 Pass 25 0 19.09 1.00 20.09 <=23 Pass 13 19.24 1.00 20.24 <=23 Pass 25 18.99 1.00 19.99 <=23 Pass 50 0 18.95 1.00 19.95 <=23 Pass 3625 1 0 20.00 1.00 21.00 <=23 Pass 25 20.21 1.00 21.21 <=23 Pass 49 20.11 1.00 21.11 <=23 Pass 25 0 19.02 1.00 20.02 <=23 Pass 13 19.04 1.00 20.04 <=23 Pass 25 18.85 1.00 19.85 <=23 Pass 50 0 18.89 1.00 19.89 <=23 Pass 3695 1 0 20.01 1.00 21.01 <=23 Pass 25 19.59 1.00 20.59 <=23 Pass 49 1…

Text truncated - open the document above for the full version.

Report No.: 02518MO Page 130 / 192 Band48_5MHz_QPSK_HCH_3697.5MHz_RB_1_0_NTNV Band48_5MHz_QPSK_HCH_3697.5MHz_RB_1_0_NTNV Report No.: 02518MO Page 131 / 192 Band48_5MHz_QPSK_HCH_3697.5MHz_RB_1_0_NTNV Band48_5MHz_QPSK_HCH_3697.5MHz_RB_1_24_NTNV Report No.: 02518MO Page 132 / 192 Band48_5MHz_QPSK_HCH_3697.5MHz_RB_25_0_NTNV Report No.: 02518MO Page 133 / 192 5.2.2 B48_10MHz Band48_10MHz_QPSK_LCH_3555MHz_RB_1_0_NTNV Band48_10MHz_QPSK_LCH_3555MHz_RB_1_0_NTNV Report No.: 02518MO Page 134 / 192 Band48_10MHz_QPSK_LCH_3555MHz_RB_1_0_NTNV Band48_10MHz_QPSK_LCH_3555MHz_RB_1_0_NTNV Report No.: 02518MO Page 135 / 192 Band48_10MHz_QPSK_LCH_3555MHz_RB_50_0_NTNV Band48_10MHz_QPSK_MCH_3625MHz_RB_1_0_NTNV Report No.: 02518MO Page 136 / 192 Band48_10MHz_QPSK_MCH_3625MHz_RB_1_0_NTNV Band48_10MHz_QPSK_MCH_3625MHz_RB_1_0_NTNV Report No.: 02518MO Page 137 / 192 Band48_10MHz_QPSK_HCH_3695MHz_RB_1_0_NTNV Band48_10MHz_QPSK_HCH_3695MHz_RB_1_0_NTNV Report No.: 02518MO Page 138 / 192 Band48_10MHz_QPSK_HCH_3695MHz_RB_1_0_NTNV Band48_10MHz_QPSK_HCH_3695MHz_RB_1_49_NTNV Report No.: 02518MO Page 139 / 192 Band48_10MHz_QPSK_HCH_3695MHz_RB_50_0_NTNV Report No.: 02518MO Page 140 / 192 5.2.3 B48_15MHz Band48_15MHz_QPSK_LCH_3557.5MHz_RB_1_0_NTNV Band48_15MHz_QPSK_LCH_3557.5MHz_RB_1_0_NTNV Report No.: 02518MO Page 141 / 192 Band48_15MHz_QPSK_LCH_3557.5MHz_RB_1_0_NTNV Band48_15MHz_QPSK_LCH_3557.5MHz_RB_1_0_NTNV Report No.: 02518MO Page 142 / 192 Band48_15MHz_QPSK_LCH_3557.5MHz_RB_75_0_NTNV Band48_15MHz_QPSK_MCH_3625MHz_RB_1_0_NTNV Report No.: 02518MO Page 143 / 192 Band48_15MHz_QPSK_MCH_3625MHz_RB_1_0_NTNV Band48_15MHz_QPSK_MCH_3625MHz_RB_1_0_NTNV Report No.: 02518MO Page 144 / 192 Band48_15MHz_QPSK_HCH_3692.5MHz_RB_1_0_NTNV Band48_15MHz_QPSK_HCH_3692.5MHz_RB_1_0_NTNV Report No.: 02518MO Page 145 / 192 Band48_15MHz_QPSK_HCH_3692.5MHz_RB_1_0_NTNV Band48_15MHz_QPSK_HCH_3692.5MHz_RB_1_74_NTNV Report No.: 02518MO Page 146 / 192 Band48_15MHz_QPSK_HCH_3692.5MHz_RB_75_0_NTNV Report No.: 02518MO Page 147 / 192 5.2.4 B48_20MHz Band48_20MHz_QPSK_LCH_3560MHz_RB_1_0_NTNV Band48_20MHz_QPSK_LCH_3560MHz_RB_1_0_NTNV Report No.: 02518MO Page 148 / 192 Band48_20MHz_QPSK_LCH_3560MHz_RB_1_0_NTNV Band48_20MHz_QPSK_LCH_3560MHz_RB_1_0_NTNV Report No.: 02518MO Page 149 / 192 Band48_20MHz_QPSK_LCH_3560MHz_RB_100_0_NTNV Band48_20MHz_QPSK_MCH_3625MHz_RB_1_0_NTNV Report No.: 02518MO Page 150 / 192 Band48_20MHz_QPSK_MCH_3625MHz_RB_1_0_NTNV Band48_20MHz_QPSK_MCH_3625MHz_RB_1_0_NTNV Report No.: 02518MO Page 151 / 192 Band48_20MHz_QPSK_HCH_3690MHz_RB_1_0_NTNV Band48_20MHz_QPSK_HCH_3690MHz_RB_1_0_NTNV Report No.: 02518MO Page 152 / 192 Band48_20MHz_QPSK_HCH_3690MHz_RB_1_0_NTNV Band48_20MHz_QPSK_HCH_3690MHz_RB_1_99_NTNV Report No.: 02518MO Page 153 / 192 Band48_20MHz_QPSK_HCH_3690MHz_RB_100_0_NTNV Report No.: 02518MO Page 154 / 192 6. Adjacent Channel Leakage Ratio 6.1 Test Result 6.1.1 B48_5MHz Band: 48 / Bandwidth: 5MHz / NTNV Modulation Frequency (MHz) RB Allocation Adjacent Channel Leakage Ratio Verdict Size Offset Result Limit QPSK 3552.5 1 0 Refer To Test Graph Pass 24 Refer To Test Graph Pass 25 0 Refer To Test Graph Pass 3625 1 0 Refer To Test Graph Pass 24 Refer To Test Graph Pass 25 0 Refer To Test Graph Pass 3697.5 1 0 Refer To Test Graph Pass 24 Refer To Test Graph Pass 25 0 Refer To Test Graph Pass 16QAM 3552.5 1 0 Refer To Test Graph Pass 24 Refer To Test Graph Pass 25 0 Refer To Test Graph Pass 3625 1 0 Refer To Test Graph Pass 24 Refer To Test Graph Pass 25 0 Refer To Test Graph Pass 3697.5 1 0 Refer To Test Graph Pass 24 Refer To Test Graph Pass 25 0 Refer To Test Graph Pass 6.1.2 B48_10MHz Band: 48 / Bandwidth: 10MHz / NTNV Modulation Frequency (MHz) RB Allocation Adjacent Channel Leakage Ratio Verdict Size Offset Result Limit QPSK 3555 1 0 Refer To Test Graph Pass 49 Refer To Test Graph Pass 50 0 Refer To Test Graph Pass 3625 1 0 Refer To Test Graph Pass 49 Refer To Test Graph Pass 50 0 Refer To Test Graph Pass 3695 1 0 Refer To Test Graph Pass 49 Refer To Test Graph Pass 50 0 Refer To Test Graph Pass 16QAM 3555 1 0 Refer To Test Graph Pass 49 Refer To Test Graph Pass 50 0 Refer To Test Graph Pass 3625 1 0 Refer To Test Graph Pass 49 Refer To Test Graph Pass 50 0 Refer To Test Graph Pass 3695 1 0 Refer To Test Graph Pass 49 Refer To Test Graph Pass 50 0 Refer To Test Graph Pass Report No.: 02518MO Page 155 / 192 6.1.3 B48_15MHz Band: 48 / Bandwidth: 15MHz / NTNV Modulation Frequency (MHz) RB Allocation Adjacent Channel Leakage Ratio Verdict Size Offset Result Limit QPSK 3557.5 1 0 Refer To Test Graph Pass 74 Refer To Test Graph Pass 75 0 Refer To Test Graph Pass 3625 1 0 Refer To Test Graph Pass 74 Refer To Test Graph Pass 75 0 Refer To Test Graph Pass 3692.5 1 0 Refer To Test Graph Pass 74 Refer To Test Graph Pass 75 0 Refer To Test Graph Pass 16QAM 3557.5 1 0 Refer To Test Graph Pass 74 Refer To Test Graph Pass 75 0 Refer To Test Graph Pass 3625 1 0 Refer To Test Graph Pass 74 Refer To Test Graph Pass 75 0 Refer To Test Graph Pass 3692.5 1 0 Refer To Test Graph Pass 74 Refer To Test Graph Pass 75 0 Refer To Test Graph Pass 6.1.4 B48_20MHz Band: 48 / Bandwidth: 20MHz / NTNV Modulation Frequency (MHz) RB Allocation Adjacent Channel Leakage Ratio Verdict Size Offset Result Limit QPSK 3560 1 0 Refer To Test Graph Pass 99 Refer To Test Graph Pass 100 0 Refer To Test Graph Pass 3625 1 0 Refer To Test Graph Pass 99 Refer To Test Graph Pass 100 0 Refer To Test Graph Pass 3690 1 0 Refer To Test Graph Pass 99 Refer To Test Graph Pass 100 0 Refer To Test Graph Pass 16QAM 3560 1 0 Refer To Test Graph Pass 99 Refer To Test Graph Pass 100 0 Refer To Test Graph Pass 3625 1 0 Refer To Test Graph Pass 99 Refer To Test Graph Pass 100 0 Refer To Test Graph Pass 3690 1 0 Refer To Test Graph Pass 99 Refer To Test Graph Pass 100 0 Refer To Test Graph Pass Report No.: 02518MO Page 156 / 192 6.2 Test Graph 6.2.1 B48_5MHz Band48_5MHz_QPSK_LCH_3552.5MHz_RB_1_0_NTNV Band48_5MHz_QPSK_LCH_3552.5MHz_RB_1_24_NTNV Report No.: 02518MO Page 157 / 192 Band48_5MHz_QPSK_LCH_35…

Text truncated - open the document above for the full version.

SGS-CSTC Standards Technical Services Co., Ltd. Shenzhen Branch SZEMC-TRF-01 Rev. A/1 Report No.: SZCR240700251802 Page: 1 of 50 Keny Xu EMC Laboratory Manager TEST REPORT Application No.: SZCR2407002518MO Applicant: Rolling Wireless S.a r.l. Address of Applicant: 8-10, rue Mathias Hardt 1717, Luxembourg Manufacturer: Rolling Wireless S.a r.l. Address of Manufacturer: 8-10, rue Mathias Hardt 1717, Luxembourg EUT Description: LTE Module Model No.: RW101R-GL Trade Mark: Rolling Wireless FCC ID: 2AX2URW101RGL Standards: 47 CFR Part 2 47 CFR Part 22 47 CFR Part 24 47 CFR Part 27 47 CFR Part 90 47 CFR Part 96 Date of Receipt: 2024-07-01 Date of Test: 2024-07-01 to 2024-07-26 Date of Issue: 2024-07-26 Test Result : PASS * * In the configuration tested, the EUT detailed in this report complied with the standards specified above. SGS-CSTC Standards Technical Services Co., Ltd. Shenzhen Branch SZEMC-TRF-01 Rev. A/1 Report No.: SZCR240700251802 Page: 2 of 50 1 Version Revision Record Version Chapter Date Modifier Remark 01 2024-07-26 Original Authorized for issue by: Donjon Huang/Project Engineer Eric Fu/Reviewer SGS-CSTC Standards Technical Services Co., Ltd. Shenzhen Branch SZEMC-TRF-01 Rev. A/1 Report No.: SZCR240700251802 Page: 3 of 50 Contents 1 Version .......................................................................................................................... 2 2 Test Summary ...........................................................…

Text truncated - open the document above for the full version.