2AX2URW350RGL5G module

Federal Communications Commission 7435 Oakland Mills Road Columbia MD 21046 Date: June 12, 2024 Subject: Certifications concerning “covered” equipment pursuant to Part 2.911(d)(5)(i) and (ii) To whom it may concern, Rolling Wireless S.a r.l. certifies that the equipment FCC ID: 2AX2URW350RGL for which authorization is sought is not “covered” equipment prohibited from receiving an equipment authorization pursuant to section 2.903 of the FCC rules. Rolling Wireless S.a r.l. certifies that, as of the date of the filing of the application, the applicant is not identified on the Covered List (as a specifically named entity or any of its subsidiaries or affiliates) as an entity producing “covered” equipment. Sincerely, ________________________ Name: Wilson Lin E-mail: [email protected]

Date: June 12, 2024 Power of Attorney To whom it may concern, Please be notified that I, Wilson Lin, have designated Jim Tsai in Sporton International Inc. as the person being responsible for this project and to sign the form 731 and other documentation. Any and all acts carried out by Jim Tsai in Sporton International Inc., on the matters of relating to all processes required in the FCC approval and any communication needed with the national authority, shall have the same legal authority as acts on our own behalf. We further certifies that neither the applicant nor any party to this application, as defined in 47 CFR Ch. 1.2002 (b), is subject to a denial to Federal benefits, that include FCC benefits, pursuant to section 5301 of the Anti-Drug Abuse Act of 1998, 21 U.S.C. 835(a). This authorization is limited to the product of as following: FCC ID: 2AX2URW350RGL If you have any acknowledgement and response, please send it to Sporton International Inc. directly. Should you have any questions or comments regarding this matter, please have my best attention. Sincerely yours, Name: Wilson Lin E-mail: [email protected]

Date: June 12, 2024 Federal Communications Commission Office of Engineering and Technology Laboratory Division 7435 Oakland Mills Rd Columbia MD 21046-1609 Subject: Request for Confidentiality FCC ID: 2AX2URW350RGL To Whom It May Concern, Pursuant to the provisions of Sections 0.457 and 0.459 of Commission’s rules (47CFR§§0.457, 0.459), we are requesting the Commission to withhold the following attachment(s) as confidential document from public disclosure indefinitely. ⚫ Schematic Diagram ⚫ Block Diagram ⚫ Part List ⚫ Operational Description ⚫ Tune-up Procedure Above mentioned document contains detailed system and equipment description are considered as proprietary information in operation of the equipment. The public disclosure of above documents might be harmful to our company and would give competitor an unfair advantage in the market. In additional to above mentioned documents, pursuant to Public Notice DA 04-1705 of the Commission’ s policy, in order to comply with the marketing regulations in 47 CFT §2.803 and the importation rules in 47 CFR §2.1204, while ensuring that business sensitive information remains confidential until the actual marketing of newly authorized devices. We are requesting the commission to grant short-term confidentiality request on the following attachment(s) for 180 days after the grant as outlined in Public Notice DA 04-1705. ⚫ External Photos ⚫ Internal Photos ⚫ Test Setup Photos ⚫ User Manual It is our understanding that all measurement test reports, FCC ID label format and correspondent during certification review process cannot be granted as confidential documents and those information will be available for public review once the grant of equipment authorization is issued. Best Regards, ______________________ Name: Wilson Lin E-mail: [email protected]

Applicant/Grantee Rolling Wireless S.a r.l. FCC ID: 2AX2URW350RGL Section 15.212 Modular Transmitters Request for Modular Approval Request for Limited Modular Approval Requirements EUT Conditions Comply (Y/N) Single Modular Approval Requirements 1 The radio elements of the modular transmitter must have their own shielding. The physical crystal and tuning capacitors may be located external to the shielded radio elements. The radio portion of this module is shielded, please see exhibition external photos. Y 2 The modular transmitter must have buffered modulation/data inputs (if such inputs are provided) to ensure that the module will comply with Part 15 requirements under conditions of excessive data rates or over-modulation. The module has buffer modulation/data inputs. Y 3 The modular transmitter must have its own power supply regulation. The module has its own power supply regulation. Please see the schem.pdf Y 4 The modular transmitter must comply with the antenna and transmission system requirements of Sections 15.203, 15.204(b) and 15.204(c). The antenna must either be permanently attached or employ a “unique” antenna coupler (at all connections between the module and the antenna, including the cable). The “professional installation” provision of Section 15.203 is not applicable to modules but can apply to limited modular approvals under paragraph (b) of this section. The requirements of antenna connector and spurious emission have been fulfilled. Please refer to the Test Report exhibition. Y 5 The modular transmitter must be tested in a stand-alone configuration, i.e., the module must not be inside another device during testing for compliance with Part 15 requirements. Unless the transmitter module will be battery powered, it must comply with the AC line conducted requirements found in Section 15.207. AC or DC power lines and data input/output lines connected to the module must not contain ferrites, unless they will be marketed with the module (see Section 15.27(a)). The length of these lines shall be the length typical of actual use or, if that length is unknown, at least 10 centimeters to insure that there is no coupling between the case of the module and supporting Please refer to the Setup Photo exhibition for the stand-alone test configuration. Y equipment. Any accessories, peripherals, or support equipment connected to the module during testing shall be unmodified and commercially available (see Section 15.31(i)). 6 The modular transmitter must be equipped with either a permanently affixed label or must be capable of electronically displaying its FCC identification number. (A) If using a permanently affixed label, the modular transmitter must be labeled with its own FCC identification number, and, if the FCC identification number is not visible when the module is installed inside another device, then the outside of the device into which the module is installed must also display a label referring to the enclosed module. This exterior label can use wording such as the following: “Contains Transmitter Module FCC ID: XYZMODEL1” or “Contains FCC ID: XYZMODEL1.” Any similar wording that expresses the same meaning may be used. The Grantee may either provide such a label, an example of which must be included in the application for equipment authorization, or, must provide adequate instructions along with the module which explain this requirement. In the latter case, a copy of these instructions must be included in the application for equipment authorization. (B) If the modular transmitter uses an electronic display of the FCC identification number, the information must be readily accessible and visible on the modular transmitter or on the device in which it is installed. If the module is installed inside another device, then the outside of the device into which the module is installed must display a label referring to the enclosed module. This exterior label can use wording such as the following: “Contains FCC certified transmitter module(s).” Any similar wording that expresses the same meaning may be used. The user manual must include instructions on how to access the electronic display. A copy of these instructions must be included in the application for equipment authorization. The Module will be labeled with its own FCC ID, and the instruction on the labeling rule of the end product has been stated in the User Manual of this module. Please refer to the Label and User Manual exhibition. Y 7 The modular transmitter must comply with any specific rules or operating requirements that ordinarily apply to a complete transmitter and the manufacturer must provide adequate instructions along with the module to explain any such requirements. A copy of these instructions must be included in the application for equipment authorization. The required FCC rule has been fulfilled and all the instructions for maintaining compliance have been clearly stated in the User Manual. Y 8 The modular transmitter must comply with any applicable RF exposure requirements in its final configuration. Please refer exhibition RF Exposure for the compliance of MPE RF exposure rule. Y _________________________________ Name: Wilson Lin E-mail: [email protected]

Sporton International Inc. (Shenzhen) Page Number : 1 of 11 TEL : +86-755-86379589 / FAX : +86-755-86379595 Report Issued Date : Jun. 13, 2024 FCC ID : 2AX2URW350RGL Report Version : Rev. 01 RF Exposure Evaluation Report Report No. : FA430728 RF Exposure Evaluation Report APPLICANT : Rolling Wireless S.a r.l. EQUIPMENT : 5G module BRAND NAME : Rolling Wireless MODEL NAME : RW350R-GL FCC ID : 2AX2URW350RGL STANDARD : 47 CFR Part 2.1091 FCC KDB 447498 D01 v06 The product evaluation date was started from Jun. 01, 2024 and completed on Jun. 01, 2024. We, Sporton International Inc. (Shenzhen), would like to declare that the device has been evaluated in accordance with 47 CFR Part 2.1091 and FCC KDB 447498 D01 v06, and pass the limit. Without written approval of Sporton International Inc. (Shenzhen), the test report shall not be reproduced except in full. Approved by: Si Zhang Sporton International Inc. (Shenzhen) 1/F, 2/F, Bldg 5, Shiling Industrial Zone, Xinwei Village, Xili, Nanshan, Shenzhen, 518055 People’s Republic of China Sporton International Inc. (Shenzhen) Page Number : 2 of 11 TEL : +86-755-86379589 / FAX : +86-755-86379595 Report Issued Date : Jun. 13, 2024 FCC ID : 2AX2URW350RGL Report Version : Rev. 01 RF Exposure Evaluation Report Report No. : FA430728 Table of Contents 1. ADMINISTRATION DATA ........................................................................................................................... 4 1.1. Testing Laboratory ............................................................................................................................. 4 2. DESCRIPTION OF EQUIPMENT UNDER TEST (EUT) ............................................................................. 5 3. MAXIMUM RF AVERAGE OUTPUT TUNE UP POWER AMONG PRODUCTION UNITS ....................... 7 4. RF EXPOSURE LIMIT INTRODUCTION .................................................................................................... 9 5. RADIO FREQUENCY RADIATION EXPOSURE EVALUATION ............................................................. 10 5.1. Standalone Power Density Calculation ........................................................................................... 10 5.2. Collocated Power Density Calculation ............................................................................................. 11 Sporton International Inc. (Shenzhen) Page Number : 3 of 11 TEL : +86-755-86379589 / FAX : +86-755-86379595 Report Issued Date : Jun. 13, 2024 FCC ID : 2AX2URW350RGL Report Version : Rev. 01 RF Exposure Evaluation Report Report No. : FA430728 Revision History REPORT NO. VERSION DESCRIPTION ISSUED DATE FA430728 Rev. 01 Initial issue of report. Jun. 13, 2024 Sporton International Inc. (Shenzhen) Page Number : 4 of 11 TEL : +86-755-86379589 / FAX : +86-755-86379595 Report Issued Date : Jun. 13, 2024 FCC ID : 2AX2URW350RGL Report Version : Rev. 01 RF Exposure Evaluation Report Report No. : FA430728 1. Administration Data 1.1. Testing Laboratory Sporton International Inc. (Shenzhen) is accredited to ISO/IEC 17025:2017 by American Association for Laboratory Accreditation with Certificate Number 5145.01. Testing Laboratory Test Firm Sporton International Inc. (Shenzhen) Test Site Location 1/F, 2/F, Bldg 5, Shiling Industrial Zone, Xinwei Village, Xili, Nanshan, Shenzhen, 518055 People’s Republic of China TEL: +86-755-86379589 FAX: +86-755-86379595 Test Site No. Sporton Site No. FCC Designation No. FCC Test Firm Registration No. SAR01-SZ CN1256 421272 Applicant Company Name Rolling Wireless S.a r.l. Address 8-10, rue Mathias Hardt 1717, Luxembourg Manufacturer Company Name Rolling Wireless S.a r.l. Address 8-10, rue Mathias Hardt 1717, Luxembourg Sporton International Inc. (Shenzhen) Page Number : 5 of 11 TEL : +86-755-86379589 / FAX : +86-755-86379595 Report Issued Date : Jun. 13, 2024 FCC ID : 2AX2URW350RGL Report Version : Rev. 01 RF Exposure Evaluation Report Report No. : FA430728 2. Description of Equipment Under Test (EUT) Product Feature & Specification EUT Type 5G module Brand Name Rolling Wireless Model Name RW350R-GL FCC ID 2AX2URW350RGL Wireless Technology and Frequency Range WCDMA Band II: 1850 MHz ~ 1910 MHz WCDMA Band IV: 1710 MHz ~ 1755 MHz WCDMA Band V: 824 MHz ~ 849 MHz LTE Band 2 : 1850 MHz ~ 1910 MHz LTE Band 4 : 1710 MHz ~ 1755 MHz LTE Band 5 : 824 MHz ~ 849 MHz LTE Band 7: 2500 MHz ~ 2570 MHz LTE Band 12 : 699 MHz ~ 716 MHz LTE Band 13 : 777 MHz ~ 787 MHz LTE Band 14: 788 MHz ~ 798 MHz LTE Band 17: 704 MHz ~ 716 MHz LTE Band 25 : 1850 MHz ~ 1915 MHz LTE Band 26 : 814 MHz ~ 849 MHz LTE Band 30: 2305 MHz ~ 2315 MHz LTE Band 38: 2570 MHz ~ 2620 MHz LTE Band 41: 2496 MHz ~ 2690 MHz LTE Band 42: 3450 MHz ~ 3600 MHz LTE Band 43: 3600 MHz ~ 3700MHz LTE Band 48: 3550 MHz ~ 3700 MHz LTE Band 66 : 1710 MHz ~ 1780 MHz LTE Band 71: 663 MHz ~ 698 MHz 5G NR n2 : 1850 MHz ~ 1910 MHz 5G NR n5 : 824 MHz ~ 849 MHz 5G NR n7 : 2500 MHz ~ 2570 MHz 5G NR n12 : 699 MHz ~ 716 MHz 5G NR n14 : 788 MHz ~ 798 MHz 5G NR n25 : 1850 MHz ~1915 MHz 5G NR n26 : 814 MHz ~ 849 MHz 5G NR n30 : 2305 MHz ~ 2315 MHz 5G NR n38 : 2570 MHz ~ 2620 MHz 5G NR n41 : 2496 MHz ~ 2690 MHz 5G NR n48 : 3550 MHz ~ 3700 MHz 5G NR n66 : 1710 MHz ~ 1780 MHz 5G NR n71 : 663 MHz ~ 698 MHz 5G NR n77 : 3450 MHz ~ 3550 MHz, 3700 MHz ~ 3980 MHz 5G NR n78 : 3450 MHz ~ 3550 MHz, 3700 MHz ~ 3800 MHz Mode RMC 12.2Kbps HSDPA HSUPA DC-HSDPA HSPA+(16QAM uplink is supported) LTE: QPSK, 16QAM, 64QAM, 256QAM 5G NR : CP-OFDM / DFT-s-OFDM, PI/2 BPSK, QPSK, 16QAM, 64QAM, 256QAM Antenna Gain WCDMA Band II: 4.00 dBi WCDMA Band IV: 3.00 dBi WCDMA Band V: 3.00 dBi LTE Band 2 : 4.00 dBi LTE Band 4 : 3.00 dBi LTE Band 5 : 3.00 dBi LTE Band 7 : 3.00 dBi LTE Band 12 : 3.00 dBi LTE Band 13 : 3.00 dBi LTE Band 14 : 3.00 dBi LTE Band 17 : 3.00 dBi LTE Band 25 : 4.00 dBi Sporton International Inc. (Shenzhen) Page Number : 6 of 11 TEL : +86-755-86379589 / FAX : +86-755-86379595 Report Issued Date : Jun. 13, 2024 FCC ID : 2AX2URW350RGL Report Version : Rev. 01 R…

Text truncated - open the document above for the full version.

B5_N66(35M)_CP- OFDM_QPSK_Outer_Full_Mid_CH B5_N66(35M)_CP-OFDM_16 QAM_Outer_Full_Mid_CH B5_N66(35M)_CP-OFDM_64 QAM_Outer_Full_Mid_CH B5_N66(35M)_CP-OFDM_256 QAM_Outer_Full_Mid_CH B5_N66(40M)_CP- OFDM_QPSK_Outer_Full_Mid_CH B5_N66(40M)_CP-OFDM_16 QAM_Outer_Full_Mid_CH B5_N66(40M)_CP-OFDM_64 QAM_Outer_Full_Mid_CH B5_N66(40M)_CP-OFDM_256 QAM_Outer_Full_Mid_CH B5_N66(45M)_CP- OFDM_QPSK_Outer_Full_Mid_CH B5_N66(45M)_CP-OFDM_16 QAM_Outer_Full_Mid_CH B5_N66(45M)_CP-OFDM_64 QAM_Outer_Full_Mid_CH B5_N66(45M)_CP-OFDM_256 QAM_Outer_Full_Mid_CH Conducted Spurious Emissions NR Band SCS (kHz) Bandwidth (MHz) Arfcn Freq (MHz) Modulation RB Result Verdict 66 15 5 342500 1712.5 DFT-s-OFDM BPSK 1@0 see graph --- 66 15 5 342500 1712.5 DFT-s-OFDM BPSK 1@0 see graph PASS 66 15 5 342500 1712.5 DFT-s-OFDM QPSK 1@0 see graph --- 66 15 5 342500 1712.5 DFT-s-OFDM QPSK 1@0 see graph PASS 66 15 5 349000 1745.0 DFT-s-OFDM BPSK 1@0 see graph --- 66 15 5 349000 1745.0 DFT-s-OFDM BPSK 1@0 see graph PASS 66 15 5 349000 1745.0 DFT-s-OFDM QPSK 1@0 see graph --- 66 15 5 349000 1745.0 DFT-s-OFDM QPSK 1@0 see graph PASS 66 15 5 355500 1777.5 DFT-s-OFDM BPSK 1@0 see graph --- 66 15 5 355500 1777.5 DFT-s-OFDM BPSK 1@0 see graph PASS 66 15 5 355500 1777.5 DFT-s-OFDM QPSK 1@0 see graph --- 66 15 5 355500 1777.5 DFT-s-OFDM QPSK 1@0 see graph PASS 66 15 25 344500 1722.5 DFT-s-OFDM BPSK 1@0 see graph --- 66 15 25 344500 1722.5 DFT-s-OFDM BPSK 1@0 see graph PASS 66 15 25 344500 1722.5 DFT-s-OFDM QPSK 1@0 see graph --- 66 15 25 344500 1722.5 DFT-s-OFDM QPSK 1@0 see graph PASS 66 15 25 349000 1745.0 DFT-s-OFDM BPSK 1@0 see graph --- 66 15 25 349000 1745.0 DFT-s-OFDM BPSK 1@0 see graph PASS 66 15 25 349000 1745.0 DFT-s-OFDM QPSK 1@0 see graph --- 66 15 25 349000 1745.0 DFT-s-OFDM QPSK 1@0 see graph PASS 66 15 25 353500 1767.5 DFT-s-OFDM BPSK 1@0 see graph --- 66 15 25 353500 1767.5 DFT-s-OFDM BPSK 1@0 see graph PASS 66 15 25 353500 1767.5 DFT-s-OFDM QPSK 1@0 see graph --- 66 15 25 353500 1767.5 DFT-s-OFDM QPSK 1@0 see graph PASS 66 15 45 346500 1732.5 DFT-s-OFDM BPSK 1@0 see graph --- 66 15 45 346500 1732.5 DFT-s-OFDM BPSK 1@0 see graph PASS 66 15 45 346500 1732.5 DFT-s-OFDM QPSK 1@0 see graph --- 66 15 45 346500 1732.5 DFT-s-OFDM QPSK 1@0 see graph PASS 66 15 45 349000 1745.0 DFT-s-OFDM BPSK 1@0 see graph --- 66 15 45 349000 1745.0 DFT-s-OFDM BPSK 1@0 see graph PASS 66 15 45 349000 1745.0 DFT-s-OFDM QPSK 1@0 see graph --- 66 15 45 349000 1745.0 DFT-s-OFDM QPSK 1@0 see graph PASS 66 15 45 351500 1757.5 DFT-s-OFDM BPSK 1@0 see graph --- 66 15 45 351500 1757.5 DFT-s-OFDM BPSK 1@0 see graph PASS 66 15 45 351500 1757.5 DFT-s-OFDM QPSK 1@0 see graph --- 66 15 45 351500 1757.5 DFT-s-OFDM QPSK 1@0 see graph PASS B5_N66(5M)_DFT-s- OFDM_BPSK_Edge_1RB_Left_Low_CH B5_N66(5M)_DFT-s- OFDM_QPSK_Edge_1RB_Left_Low_CH B5_N66(5M)_DFT-s- OFDM_BPSK_Edge_1RB_Left_Mid_CH B5_N66(5M)_DFT-s- OFDM_QPSK_Edge_1RB_Left_Mid_CH B5_N66(5M)_DFT-s- OFDM_BPSK_Edge_1RB_Left_High_CH B5_N66(5M)_DFT-s- OFDM_QPSK_Edge_1RB_Left_High_CH B5_N66(25M)_DFT-s- OFDM_BPSK_Edge_1RB_Left_Low_CH B5_N66(25M)_DFT-s- OFDM_QPSK_Edge_1RB_Left_Low_CH B5_N66(25M)_DFT-s- OFDM_BPSK_Edge_1RB_Left_Mid_CH B5_N66(25M)_DFT-s- OFDM_QPSK_Edge_1RB_Left_Mid_CH B5_N66(25M)_DFT-s- OFDM_BPSK_Edge_1RB_Left_High_CH B5_N66(25M)_DFT-s- OFDM_QPSK_Edge_1RB_Left_High_CH B5_N66(45M)_DFT-s- OFDM_BPSK_Edge_1RB_Left_Low_CH B5_N66(45M)_DFT-s- OFDM_QPSK_Edge_1RB_Left_Low_CH B5_N66(45M)_DFT-s- OFDM_BPSK_Edge_1RB_Left_Mid_CH B5_N66(45M)_DFT-s- OFDM_QPSK_Edge_1RB_Left_Mid_CH B5_N66(45M)_DFT-s- OFDM_BPSK_Edge_1RB_Left_High_CH B5_N66(45M)_DFT-s- OFDM_QPSK_Edge_1RB_Left_High_CH Conducted Band Edge NR Band SCS (kHz) Bandwidth (MHz) Arfcn Freq (MHz) Modulation RB Result Verdict 66 15 5 342500 1712.5 DFT-s-OFDM BPSK 1@0 see graph PASS 66 15 5 342500 1712.5 DFT-s-OFDM QPSK 1@0 see graph PASS 66 15 5 342500 1712.5 DFT-s-OFDM BPSK 25@0 see graph PASS 66 15 5 342500 1712.5 DFT-s-OFDM QPSK 25@0 see graph PASS 66 15 5 355500 1777.5 DFT-s-OFDM BPSK 1@24 see graph PASS 66 15 5 355500 1777.5 DFT-s-OFDM QPSK 1@24 see graph PASS 66 15 5 355500 1777.5 DFT-s-OFDM BPSK 25@0 see graph PASS 66 15 5 355500 1777.5 DFT-s-OFDM QPSK 25@0 see graph PASS 66 15 25 344500 1722.5 DFT-s-OFDM BPSK 1@0 see graph PASS 66 15 25 344500 1722.5 DFT-s-OFDM QPSK 1@0 see graph PASS 66 15 25 344500 1722.5 DFT-s-OFDM BPSK 128@0 see graph PASS 66 15 25 344500 1722.5 DFT-s-OFDM QPSK 128@0 see graph PASS 66 15 25 353500 1767.5 DFT-s-OFDM BPSK 1@132 see graph PASS 66 15 25 353500 1767.5 DFT-s-OFDM QPSK 1@132 see graph PASS 66 15 25 353500 1767.5 DFT-s-OFDM BPSK 128@0 see graph PASS 66 15 25 353500 1767.5 DFT-s-OFDM QPSK 128@0 see graph PASS 66 15 45 346500 1732.5 DFT-s-OFDM BPSK 1@0 see graph PASS 66 15 45 346500 1732.5 DFT-s-OFDM QPSK 1@0 see graph PASS 66 15 45 346500 1732.5 DFT-s-OFDM BPSK 240@0 see graph PASS 66 15 45 346500 1732.5 DFT-s-OFDM QPSK 240@0 see graph PASS 66 15 45 351500 1757.5 DFT-s-OFDM BPSK 1@241 see graph PASS 66 15 45 351500 1757.5 DFT-s-OFDM QPSK 1@241 see graph PASS 66 15 45 351500 1757.5 DFT-s-OFDM BPSK 240@0 see graph PASS 66 15 45 351500 1757.5 DFT-s-OFDM QPSK 240@0 see graph PASS B5_N66(5M)_DFT-s- OFDM_BPSK_Edge_1RB_Left_Low_CH B5_N66(5M)_DFT-s- OFDM_QPSK_Edge_1RB_Left_Low_CH B5_N66(5M)_DFT-s- OFDM_BPSK_Outer_Full_Low_CH B5_N66(5M)_DFT-s- OFDM_QPSK_Outer_Full_Low_CH B5_N66(5M)_DFT-s- OFDM_BPSK_Edge_1RB_Right_High_CH B5_N66(5M)_DFT-s- OFDM_QPSK_Edge_1RB_Right_High_CH B5_N66(5M)_DFT-s- OFDM_BPSK_Outer_Full_High_CH B5_N66(5M)_DFT-s- OFDM_QPSK_Outer_Full_High_CH B5_N66(25M)_DFT-s- OFDM_BPSK_Edge_1RB_Left_Low_CH B5_N66(25M)_DFT-s- OFDM_QPSK_Edge_1RB_Left_Low_CH B5_N66(25M)_DFT-s- OFDM_BPSK_Outer_Full_Low_CH B5_N66(25M)_DFT-s- OFDM_QPSK_Outer_Full_Low_CH B5_N66(25M)_DFT-s- OFDM_BPSK_Edge_1RB_Right_High_CH B5_N66(25M)_DFT-s- OFDM_QPSK_Edge_1RB_Right_High_CH B5_N66(25M)_DFT-s- OFDM_BPSK_Outer_Full_High_CH B5_N66(25M)_DFT-s- OFDM_QPSK_Outer_Full_High_CH B5_N66(45M)_DFT-s- OFDM_BPSK_Edge_1RB_Left_Low_CH B5_N66(45M)_DFT-s- OFDM_BPSK_Edge_1RB_Left_Low_CH…

Text truncated - open the document above for the full version.

Sporton International Inc. (ShenZhen) Page Number : 1 of 23 TEL : +86-755-8637-9589 Report Issued Date : Jun. 13, 2024 FAX : +86-755-8637-9595 Report Version : Rev. 01 FCC ID : 2AX2URW350RGL Report Template No.: BU5-FG22/24/27 Version 2.0 FCC RF Test Report Report No. : FG430728A FCC RF Test Report APPLICANT : Rolling Wireless S.a r.l. EQUIPMENT : 5G module BRAND NAME : Rolling Wireless MODEL NAME : RW350R-GL FCC ID : 2AX2URW350RGL STANDARD : 47 CFR Part 2, 22(H), 24(E), 27(L) CLASSIFICATION : PCS Licensed Transmitter (PCB) TEST DATE(S) : Mar. 27, 2024 ~ Apr. 10, 2024 We, Sporton International Inc. (Shenzhen), would like to declare that the tested sample has been evaluated in accordance with the procedures given in ANSI C63.26-2015 and shown compliance with the applicable technical standards. The test results in this report apply exclusively to the tested model / sample. Without written approval of Sporton International Inc. (Shenzhen), the test report shall not be reproduced except in full. Approved by: Jason Jia Sporton International Inc. (ShenZhen) 1/F, 2/F, Bldg 5, Shiling Industrial Zone, Xinwei Village, Xili, Nanshan, Shenzhen, 518055 People’s Republic of China Sporton International Inc. (ShenZhen) Page Number : 2 of 23 TEL : +86-755-8637-9589 Report Issued Date : Jun. 13, 2024 FAX : +86-755-8637-9595 Report Version : Rev. 01 FCC ID : 2AX2URW350RGL Report Template No.: BU5-FG22/24/27 Version 2.0 FCC RF Test Report Report No. : FG430728A TABLE OF CONTENTS REVISION HISTORY .......................................................................................................................................... 3 SUMMARY OF TEST RESULT ......................................................................................................................... 4 1 GENERAL DESCRIPTION .......................................................................................................................... 5 1.1 Applicant ............................................................................................................................................ 5 1.2 Manufacturer ..................................................................................................................................... 5 1.3 Product Feature of Equipment Under Test ....................................................................................... 5 1.4 Product Specification of Equipment Under Test ............................................................................... 5 1.5 Modification of EUT ........................................................................................................................... 6 1.6 Maximum Conducted Power, and Emission Designator ................................................................... 6 1.7 Testing Location ................................................................................................................................ 7 1.8 Test Software .................................................................................................................................... 7 1.9 Applicable Standards ........................................................................................................................ 8 2 TEST CONFIGURATION OF EQUIPMENT UNDER TEST ........................................................................ 9 2.1 Test Mode.......................................................................................................................................... 9 2.2 Connection Diagram of Test System .............................................................................................. 10 2.3 Support Unit used in test configuration ........................................................................................... 10 2.4 Measurement Results Explanation Example .................................................................................. 11 2.5 Frequency List of Low/Middle/High Channels ................................................................................. 11 3 CONDUCTED TEST RESULT ................................................................................................................... 12 3.1 Measuring Instruments .................................................................................................................... 12 3.2 Test Setup ....................................................................................................................................... 12 3.3 Test Result of Conducted Test ........................................................................................................ 12 3.4 Conducted Output Power and ERP/EIRP ....................................................................................... 13 3.5 Peak-to-Average Ratio .................................................................................................................... 14 3.6 99% Occupied Bandwidth and 26dB Bandwidth Measurement...................................................... 15 3.7 Conducted Band Edge .................................................................................................................... 16 3.8 Conducted Spurious Emission ........................................................................................................ 17 3.9 Frequency Stability .......................................................................................................................... 18 4 RADIATED TEST ITEMS .......................................................................................................................... 19 4.1 Measuring Instruments .................................................................................................................... 19 4.2 Test Setup ....................................................................................................................................... 19 4.3 Test Result of Radiated Test ..........................................................…

Text truncated - open the document above for the full version.

Sporton International Inc. (ShenZhen) Page Number : 1 of 23 TEL : +86-755-8637-9589 Report Issued Date : Jun. 13, 2024 FAX : +86-755-8637-9595 Report Version : Rev. 01 FCC ID : 2AX2URW350RGL Report Template No.: BU5-FGLTE27D Version 2.0 FCC RF Test Report Report No. : FG430728P FCC RF Test Report APPLICANT : Rolling Wireless S.a r.l. EQUIPMENT : 5G module BRAND NAME : Rolling Wireless MODEL NAME : RW350R-GL FCC ID : 2AX2URW350RGL STANDARD : 47 CFR Part 2, 27 CLASSIFICATION : PCS Licensed Transmitter (PCB) TEST DATE(S) : Apr. 02, 2024 ~ May 20, 2024 We, Sporton International Inc. (Shenzhen), would like to declare that the tested sample has been evaluated in accordance with the procedures given in ANSI C63.26-2015 and shown compliance with the applicable technical standards. The test results in this report apply exclusively to the tested model / sample. Without written approval of Sporton International Inc. (Shenzhen), the test report shall not be reproduced except in full. Approved by: Jason Jia Sporton International Inc. (ShenZhen) 1/F, 2/F, Bldg 5, Shiling Industrial Zone, Xinwei Village, Xili, Nanshan, Shenzhen, 518055 People’s Republic of China Sporton International Inc. (ShenZhen) Page Number : 2 of 23 TEL : +86-755-8637-9589 Report Issued Date : Jun. 13, 2024 FAX : +86-755-8637-9595 Report Version : Rev. 01 FCC ID : 2AX2URW350RGL Report Template No.: BU5-FGLTE27D Version 2.0 FCC RF Test Report Report No. : FG430728P TABLE OF CONTENTS REVISION HISTORY .......................................................................................................................................... 3 SUMMARY OF TEST RESULT ......................................................................................................................... 4 1 GENERAL DESCRIPTION .......................................................................................................................... 5 1.1 Applicant ............................................................................................................................................ 5 1.2 Manufacturer ...................................................................................................................................... 5 1.3 Product Feature of Equipment Under Test ........................................................................................ 5 1.4 Product Specification of Equipment Under Test ................................................................................ 6 1.5 Modification of EUT ........................................................................................................................... 6 1.6 Maximum Conducted Power and Emission Designator .................................................................... 6 1.7 Testing Site ........................................................................................................................................ 7 1.8 Test Software .........................................…

Text truncated - open the document above for the full version.