2AX6LISMB10Mobile Node

1 2020-04-01 ZKISMB10 Unit User Guide ZKISMB10 Unit User Guide v1.1.0 2 2020-04-01 ZKISMB10 Unit User Guide ZKISMB10-UG Edition V1.1 February 2021 Copyright © ZeroKey Inc. All rights reserved. This manual is confidential and proprietary, and may not be reproduced, copied, transmitted, or translated into any language, in any form, or by any means, without the express written permission of ZeroKey Inc. (“ZeroKey”). Product warranty or service will not be extended if: (1) the product is repaired, modified, or altered, unless such repair, modification, or alteration is authorized in writing by ZeroKey; or (2) the serial number of the product is defaced or missing. ZEROKEY PROVIDES THIS MANUAL “AS IS” WITHOUT WARRANTY OF ANY KIND, EITHER EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE IMPLIED WARRANTIES OR CONDITIONS OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE. IN NO EVENT SHALL ZEROKEY, ITS DIRECTORS, OFFICERS, EMPLOYEES OR AGENTS BE LIABLE FOR ANY INDIRECT, SPECIAL, INCIDENTAL, OR CONSEQUENTIAL DAMAGES (INCLUDING DAMAGES FOR LOSS OF PROFITS, LOSS OF BUSINESS, LOSS OF USE OR DATA, INTERRUPTION OF BUSINESS AND THE LIKE), EVEN IF ZEROKEY HAS BEEN ADVISED OF THE POSSIBILITY OF SUCH DAMAGES ARISING FROM ANY DEFECT OR ERROR IN THIS MANUAL OR PRODUCT. SPECIFICATIONS AND INFORMATION CONTAINED IN THIS MANUAL ARE FURNISHED FOR INFORMATIONAL USE ONLY AND ARE SUBJECT TO CHANGE AT ANY TIME WITHOUT NOTICE AND SHOULD NOT BE CONSTRUED AS A COMMITMENT BY ZEROKEY. ZEROKEY ASSUMES NO RESPONSIBILITY OR LIABILITY FOR ANY ERRORS OR INACCURACIES THAT MAY APPEAR IN THIS MANUAL, INCLUDING THE PRODUCTS AND SOFTWARE DESCRIBED IN IT. Products and corporate names appearing in this manual may or may not be registered trademarks or copyrights of their respective companies and are used only for identification or explanation and to the owners’ benefit, without intent to infringe. 3 2020-04-01 ZKISMB10 Unit User Guide Safety Notice WARNING! The ISMB10 is designed to be operated in hazardous areas where flammable vapours and gases may be present. • Read the user manual before use. • ONLY charge in a non-hazardous area • ONLY use the specified charging adapter and cable. • Do NOT charge unit at temperatures below 0 c (32 F) • Do NOT expose the device to temperatures above 60 c (140 F) • Do NOT disassemble, modify, or attempt to repair this device. • Do NOT open this device under any circumstances. • Do NOT immerse in liquid(s). • No serviceable parts inside. • Clean only with a damp cloth to prevent static build up. Certification and Compliance The ISMB10 is certified through SGS Group for use in hazardous locations Rated as Class 1 Division 1, IP68 The radio used in this device has been certified for use according to Federal Communications Commission (FCC), Industry Canada (IC) and Conformitè Europëenne (CE) rules and regulations. 4 2020-04-01 ZKISMB10 Unit User Guide FCC Part 15 Regulatory Statement This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. RSS Regulatory Statement This device contains licence-exempt transmitter(s)/receiver(s) that comply with Innovation, Science and Economic Development Canada’s licence-exempt RSS(s). Operation is subject to the following two conditions: (1) This device may not cause interference. (2) This device must accept any interference, including interference that may cause undesired operation of the device. L’émetteur/récepteur exempt de licence contenu dans le présent appareil est conforme aux CNR d’Innovation, Sciences et Développement économique Canada applicables aux appareils radio exempts de licence. L’exploitation est autorisée aux deux conditions suivantes : (1) L’appareil ne doit pas produire de brouillage; (2) L’appareil doit accepter tout brouillage radioélectrique subi, même si le brouillage est susceptible d’en compromettre le fonctionnement. RF Exposure Statement This device has been evaluated to, and shown to be compliant with, the FCC, IC, CE Radio Frequency (RF) exposure limits. 5 2020-04-01 ZKISMB10 Unit User Guide Contents 1 OVERVIEW ..................................................................................................................................................... 6 1.1 SMART SPACE ................................................................................................................................................... 6 1.2 SAFE SPACE...................................................................................................................................................... 6 2 ISMB10 MOBILE UNIT .................................................................................................................................... 7 2.1 PHYSICAL DEVICE .......................................................................................................................................... 7 2.1.1 Size ........................................................................................................................................................... 7 2.1.2 Weight ..................................................................................................................................................... 7 2.1.3 IP Rating ................................................................................................................................................... 7 2.1.4 Power ....................................................................................................................................................... 7 2.1.5 Connector(s) ............................................................................................................................................. 7 2.1.6 Features .........................................................................................…

Text truncated - open the document above for the full version.

SGS North America Inc. Consumer and Retail 620 Old Peachtree Road Suite 100 Suwanee GA 30024 t (770) 570-1800 f (770) 277-1240 www.sgs.com Member of the SGS Group (SGS SA) Attn: Director of Certification Confidentiality Request regarding application for FCC ID: 2AX6LISMB10 LONG TERM CONFIDENTIALITY Pursuant to 47 CFR Section 0.459 and 0.457 of the commission’s rules, the applicant hereby requests confidential treatment of the documents listed below, associated with the certification application referenced above. Schematics Block Diagram Theory of Operation The documents above contain proprietary information not released to the public. Public disclosure of this information may prove harmful to the business of the applicant. SHORT TERM CONFIDENTIALITY Additionally, the applicant requests the following documents be held confidential until the device is marketed or 180 days from the grant date, whichever is less. If the device is marketed within 180 days of the Grant Date, the applicant will notify the TCB per FCC KDB 726920 D01 Confidentiality Request Procedures. Internal Photos External Photos Test Setup Photos User Manual Sincerely, Martin Taylor Agent for ZEROKEY Inc. SGS North America Title: RF/EMC Engineer Date: 17 February 2021

EXTERNAL PHOTOS FCC ID: 2AX6LISMB10 IC: 26679-ISMB10 2 © SGS SA 2016 ALL RIGHTS RESERVED 3 © SGS SA 2016 ALL RIGHTS RESERVED 4 © SGS SA 2016 ALL RIGHTS RESERVED 5 © SGS SA 2016 ALL RIGHTS RESERVED 6 © SGS SA 2016 ALL RIGHTS RESERVED 7 © SGS SA 2016 ALL RIGHTS RESERVED 8 © SGS SA 2016 ALL RIGHTS RESERVED 9 © SGS SA 2016 ALL RIGHTS RESERVED 10 © SGS SA 2016 ALL RIGHTS RESERVED WWW.SGS.COM

LABEL ONPRODUCT PACKAGING FCC ID: 2AX6LISMB10 IC: 26679-ISMB10 2 © SGS SA 2016 ALL RIGHTS RESERVED PACKAGING LABEL (3.5” x2.25”) Placed on (or inside) ESD bag containing product and accessories Model: AGISMB10 FCC Declaration: This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. WARNING: Charge only in a non-hazardous location. Read and understand the manual completely before operating. Charge before use. WWW.SGS.COM

LABEL LOCATION FCC ID: 2AX6LISMB10 IC: 26679-ISMB10 2 © SGS SA 2016 ALL RIGHTS RESERVED LABEL LOCATION WWW.SGS.COM

Working version of Aegis Mobile product ID label Actual Size 1” x 1.25” Working version of Zerokey Mobile product ID label Actual Size 1” x 1.25” FCC ID:2AX6LISMB10 IC: 26679-ISMB10 WARNING: Charge only in a non-hazardous location. Read and understand the manual completely before operating. AVERTISSEMENT: ne chargez que dans un endroit non dangereux. Lisez et comprenez complètement le manuel avant d'utiliser. MODEL: ZKISMB10 SN: XXX-NNNNNNN ID: YYYYYYYYYYY MFG: MM-DD-YYYY Zerokey 3120 12 St NE Calgary Alberta (T2E8T3) Canada Made in Canada Cl 1 Div 1 Gr A, B, C, D, T4 II 1 G Ex ia IIC T4 Gb -40 o C <= T A <= 60 o C 1180 5CHAR FCC ID:2AX6LISMB10 IC: 26679-ISMB10 WARNING: Charge only in a non-hazardous location. Read and understand the manual completely before operating. AVERTISSEMENT: ne chargez que dans un endroit non dangereux. Lisez et comprenez complètement le manuel avant d'utiliser. MODEL: AGISMB10 SN: XX-NNNNNNNN ID: YYYYYYYYYYY MFG: MM-DD-YYYY Aegis-Integrated c/o Zerokey 3120 12 St NE Calgary Alberta (T2E8T3) Canada Made in Canada Cl 1 Div 1 Gr A, B, C, D, T4 II 1 G Ex ia IIC T4 Gb -40 o C <= T A <= 60 o C 1180 5CHAR AEGIS INTEGRATED

INTERNAL PHOTOS FCC ID: 2AX6LISMB10 IC: 26679-ISMB10 2 © SGS SA 2016 ALL RIGHTS RESERVED 3 © SGS SA 2016 ALL RIGHTS RESERVED 4 © SGS SA 2016 ALL RIGHTS RESERVED 5 © SGS SA 2016 ALL RIGHTS RESERVED 6 © SGS SA 2016 ALL RIGHTS RESERVED 7 © SGS SA 2016 ALL RIGHTS RESERVED 8 © SGS SA 2016 ALL RIGHTS RESERVED 9 © SGS SA 2016 ALL RIGHTS RESERVED WWW.SGS.COM

Test Report Number: 4681230EMC05 Rev:0 ZEROKEY Inc. / Mobile Node Page: 1 of 5 Remarks: This report details the results of the testing carried out on one sample, the results contained in this test report do not relate to other samples of the same product. The manufacturer should ensure that all products in series production are in conformity with the product sample detailed in this report. This document is issued by the Company under its General Conditions of Service accessible at http://www.sgs.com/en/Terms-and- Conditions.aspx. Attention is drawn to the limitation of liability, indemnification and jurisdiction issues defined therein. Any holder of this document is advised that information contained hereon reflects the Company’s findings at the time of its intervention only and within the limits of Client’s instructions, if any. The Company’s sole responsibility is to its Client and this document does not exonerate parties to a transaction from exercising all their rights and obligations under the transaction documents. Any unauthorized alteration, forgery or falsification of the content or appearance of this document is unlawful and offenders may be prosecuted to the fullest extent of the law. RF Exposure Report Project Number: 4681230 Proposal Number: 11079 Report Number: 4681230EMC05 Revision Level: 0 Client: ZEROKEY Inc. Equipment Under Test: 50V Ultrasonic Transducer Model Name: Mobile Node Model Numbers: AGISMB10 and ZKISMB10 FCC ID: 2AX6LISMB10 Applicable Standards: 47 CFR §§ 2.1093; FCC KDB 447498 D01 General RF Exposure Guidance v06 Report issued on: 04 June 2021 Result: Exempt FOR THE SCOPE OF ACCREDITATION UNDER CERTIFICATE NUMBER: 3212.01 This report must not be used by the client to claim product certification, approval, or endorsement by A2LA, NIST, or any agency of the Federal Government. Prepared by: Martin Taylor, RF/EMC Engineer Reviewed by: Jeremy Pickens, RF Lab Manager Test Report Number: 4681230EMC05 Rev:0 ZEROKEY Inc. / Mobile Node Page: 2 of 5 SGS North America Inc. Connectivity & Products 620 Old Peachtree Road NW, Suite 100, Suwanee, GA 30024 t (770) 570-1800 www.sgs.com Member of the SGS Group (SGS SA) TABLE OF CONTENTS 1 GENERAL INFORMATION ............................................................................................................................................. 3 1.1 CLIENT INFORMATION ................................................................................................................................................... 3 1.2 TEST LABORATORY ....................................................................................................................................................... 3 1.3 GENERAL INFORMATION OF EUT .................................................................................................................................. 3 2 SAR EXCLUSION CALCULATIONS ............................................................................................................................. 4 3 REVISION HISTORY ........................................................................................................................................................ 5 Test Report Number: 4681230EMC05 Rev:0 ZEROKEY Inc. / Mobile Node Page: 3 of 5 SGS North America Inc. Connectivity & Products 620 Old Peachtree Road NW, Suite 100, Suwanee, GA 30024 t (770) 570-1800 www.sgs.com Member of the SGS Group (SGS SA) 1 General Information 1.1 Client Information Name: ZEROKEY Inc. Address: 3120 12 Street NE City, State, Zip, Country: Calgary, Alberta T2E 8T3 Canada 1.2 Test Laboratory Name: SGS North America, Inc. Address: 620 Old Peachtree Road NW, Suite 100 City, State, Zip, Country: Suwanee, GA 30024, USA Accrediting Body: A2LA Type of lab: Testing Laboratory Certificate Number: 3212.01 1.3 General Information of EUT Equipment Under Test: 50V Ultrasonic Transducer Model Name: Mobile Node Model Numbers: AGISMB10 and ZKISMB10 Sample ID: 5922 FCC ID: 2AX6LISMB10 Frequency Range: 2402 – 2480 MHz Data Modes: Bluetooth Low Energy (GFSK 1Mbps & 2Mbps) Nordic Enhanced ShockBurst Protocol (GFSK 2Mbps) Antenna: Surface Mount Stamped Metal Antenna (4.9 dBi max gain) Rated Voltage: 3.7 Vdc Rechargeable Lithium Polymer Battery Test Voltage: 3.7 Vdc Rechargeable Lithium Polymer Battery Sample Received Date: 21 December 2020 Dates of testing: 22 December 2020 to 07 January 2021 Test Report Number: 4681230EMC05 Rev:0 ZEROKEY Inc. / Mobile Node Page: 4 of 5 SGS North America Inc. Connectivity & Products 620 Old Peachtree Road NW, Suite 100, Suwanee, GA 30024 t (770) 570-1800 www.sgs.com Member of the SGS Group (SGS SA) 2 SAR Exclusion Calculations The highest output power in conjunction with the upper and lower frequency boundaries have been used to demonstrate compliance. The EUT is considered a Body worn application. Low Channel High Channel Input Select Units Unit correction Max Power:6.96dBm4.9659232155 Duty Cycle:100.0% Min separation distance:25.31mm25 Frequency, f:2402MHz2402100 Value reference Number v15mW v225mm v31.550 a) Exclusion Calculation(1g):0.3number Exclusion Calculation(10g):0.8number Conclusions (Body): Conclusions (Extremity): Values used for Calculation For 100 MHz to 6 GHz and test separation distances ≤ 50 mm, the 1-g and 10-g SAR test exclusion thresholds are determined by the following: 447498 D01 General RF Exposure Guidance v06 SAR test exclusion calculations Section 4.3: General SAR test exclusion guidance / Section 4.3.1: Standalone SAR test exclusion considerations Reference number definition [max. power of channel, including tune-up tolerance, mW] 'Rounded to nearest mW [min. test separation distance, mm] 'Rounded to nearest mm [√f(GHz)] [(max. power of channel, including tune-up tolerance, mW) / (min. test separation distance, mm)] · [√f(GHz)] ≤ 3.0 for 1-g SAR, and ≤ 7.5 for 10-g extremity SAR, <== [v2 / v3] must be less than 3 <== [v2 / v3] must be less than 7.5 The EUT max power is BELOW the threshold. SAR Te…

Text truncated - open the document above for the full version.

Test Report Number: 4681230EMC01 Rev: 1 ZEROKEY Inc. / Mobile Node Page: 1 of 42 Remarks: This report details the results of the testing carried out on one sample; the results contained in this test report do not relate to other samples of the same product. The manufacturer should ensure that all products in series production are in conformity with the product sample detailed in this report. This document is issued by the Company under its General Conditions of Service accessible at http://www.sgs.com/en/Terms-and- Conditions.aspx. Attention is drawn to the limitation of liability, indemnification and jurisdiction issues defined therein. Any holder of this document is advised that information contained hereon reflects the Company’s findings at the time of its intervention only and within the limits of Client’s instructions, if any. The Company’s sole responsibility is to its Client and this document does not exonerate parties to a transaction from exercising all their rights and obligations under the transaction documents. Any unauthorized alteration, forgery or falsification of the content or appearance of this document is unlawful, and offenders may be prosecuted to the fullest extent of the law. RF Test Report Project Number: 4681230 Proposal Number: 11079 Report Number: 4681230EMC01 Revision Level: 1 Client: ZEROKEY Inc. Equipment Under Test: 50V Ultrasonic Transducer Model Name: Mobile Node Model Number: AGISMB10 and ZKISMB10 FCC ID: 2AX6LISMB10 IC: 26679-ISMB10 Applicable Standards: FCC Part 15 Subpart C, § 15.247 RSS-247, Issue 2, February 2017 RSS-GEN, Issue 5, February 2021, Amendment 2 ANSI C63.10:2013 Report issued on: 28 June 2021 Test Result: Compliant FOR THE SCOPE OF ACCREDITATION UNDER CERTIFICATE NUMBER: 3212.01 This report must not be used by the client to claim product certification, approval, or endorsement by A2LA, NIST, or any agency of the Federal Government. Prepared by: Martin Taylor, Project Engineer Reviewed by: Jeremy Pickens, RF Lab Manager Test Report Number: 4681230EMC01 Rev: 1 ZEROKEY Inc. / Mobile Node Page: 2 of 42 SGS North America Inc. Connectivity & Products 620 Old Peachtree Road NW, Suite 100, Suwanee, GA 30024 t (770) 570-1800 www.sgs.com Member of the SGS Group (SGS SA) Table of Contents 1 SUMMARY OF TEST RESULTS ..................................................................................................................................... 4 1.1 MODIFICATIONS REQUIRED FOR COMPLIANCE .............................................................................................................. 4 2 GENERAL INFORMATION ............................................................................................................................................. 5 2.1 CLIENT INFORMATION ................................................................................................................................................... 5 2.2 TEST LABORATORY ....................................................................................................................................................... 5 2.3 GENERAL INFORMATION OF EUT .................................................................................................................................. 5 2.4 OPERATING MODES AND CONDITIONS .......................................................................................................................... 5 2.5 EUT CONNECTION BLOCK DIAGRAM – CONDUCTED MEASUREMENTS ......................................................................... 6 2.6 EUT CONNECTION BLOCK DIAGRAM – RADIATED MEASUREMENTS ............................................................................ 6 2.7 SYSTEM CONFIGURATIONS ............................................................................................................................................ 6 2.8 CABLE LIST ................................................................................................................................................................... 6 3 BANDWIDTH ..................................................................................................................................................................... 7 3.1 TEST RESULT ................................................................................................................................................................. 7 3.2 TEST METHODS ............................................................................................................................................................. 7 3.3 TEST SITE ...................................................................................................................................................................... 7 3.4 TEST EQUIPMENT .......................................................................................................................................................... 7 3.5 TEST DATA – DTS BANDWIDTH (6DB) ......................................................................................................................... 8 3.6 TEST DATA – 99% OCCUPIED BANDWIDTH ................................................................................................................... 9 4 OUTPUT POWER ............................................................................................................................................................ 10 4.1 TEST RESULT ............................................................................................................................................................... 10 4.2 TEST METHOD ............................................................................................................................................................. 10 4.3 TEST SITE .................................................................................................................................................................... 10 4.4 TEST EQUIPMENT .............…

Text truncated - open the document above for the full version.

TEST SETUP PHOTOS FCC ID: 2AX6LISMB10 IC: 26679-ISMB10 2 © SGS SA 2016 ALL RIGHTS RESERVED RSE –BELOW 1GHZ –SIDEVIEW 3 © SGS SA 2016 ALL RIGHTS RESERVED RSE –BELOW 1GHZ –REAR VIEW 4 © SGS SA 2016 ALL RIGHTS RESERVED RSE –1-18GHZ –FRONT VIEW 5 © SGS SA 2016 ALL RIGHTS RESERVED RSE –1-18GHZ –REAR VIEW 6 © SGS SA 2016 ALL RIGHTS RESERVED RSE –18-26GHZ –FRONT VIEW 7 © SGS SA 2016 ALL RIGHTS RESERVED RSE –18-26GHZ –SIDEVIEW 8 © SGS SA 2016 ALL RIGHTS RESERVED AC POWERLINE CONDUCTED EMISSIONS 9 © SGS SA 2016 ALL RIGHTS RESERVED AC POWERLINE CONDUCTED EMISSIONS 10 © SGS SA 2016 ALL RIGHTS RESERVED RF CONDUCTED TESTS WWW.SGS.COM