2AXAVWF2002302Digital Borescope

写真 動画アルバムアルバム 設定 Safety General Guide Operating Instruction CONNECTING YOUR DEVICE TO THE ENDOSCOPE Battery Maintenance Specif ication CMOS 80° 30-80mm Max to 1920*1080 DC 5V/1A Opitical Sensor FOV Depth of Field Resolution Power Input Power Supply Ingress Protection WIFI Frequency Bands 2000mAh Lithium Battery Camera IP67 Waterproof 2.4 Ghz 1.Connect the cable to the endoscope. Blue LED stay on: Running status Red LED flash: Low Battery Red LED stay on: Power off Charging status Purple LED stay on: Power on Charging status 4.Open the “Smart Endoscope” app, click the button to add “Wi-Fi Endoscope” and start using it. 2.Turn on the endoscope and the power indicator will stay blue. 3.Go into the WiFi setting on your devices, search and choose “WIFI Cam_******“to connect. Please read all safety warnings and all instructions before using this product. Fallure to follow the warnings and Instructions may result in electric shock, fire and serlous injury. Keep the tool dry, clean, free from oil, water, gas or other materials causing corrosion. WARNING！ • Keep work area clean and well lit. • This appliance is not intended for use by persons with limited physical, sensory or mental capabilities. • This appliance is not intended for medical use or personal inspection. • Keep bystanders, children away while operating the tool. • Do not overreach, keep proper footing and balance at all times. • Charge the device when the power button red blinks, the light turns to red/purple stay on when charging and will be off when fully charged. • Only use 5V indoor home use USB charger to charge the device. • Please charge the device at least once every 3 months if it is left unused for a long time to prevent damage to the battery. • Always keep the camera lens clean. • Should any other components not mentioned need to be replaced, please contact our service agents. • 1 2 3 4 56 8 9 7 10 11 General Guide Smartphone Holder Camera Light Rotate Switch Camera LED Flashlight Flashlight Switch Metal Ring Hook 1 2 3 4 5 6 7 8 9 10 Cable Port Smartphone Stand Reset Power Switch 11 Power/Battery Indicator DOWNLOADING THE APP Use the endoscope with the “Smart Endoscope“ app. You can download it from Apple Store/Google Play or scan the QR codes below. Smart Endoscope + Allgemeines Gebrauchsanweisung Anschluss Ihres Geräts an das Endoskop 1.Schließen Sie das Kabel an das Endoskop an. Blaue LED leuchtet: Betriebsstatus Rote LED blinkt: Niedriger Batteriestand Rote LED leuchtet: Gerät ausgeschaltet im Ladezustand Lila LED leuchtet: Gerät eingeschaltet im Ladezustand 4.Öffnen Sie die App “Smart Endoscope" und klicken Sie auf die Schaltfläche “ " um “Wi-Fi Endoskop" hinzuzufügen und es zu verwenden. 2.Schalten Sie das Endoskop an und die Betriebsanzeige leuchtet blau. 3.Gehen Sie in die WiFi-Einstellungen Ihres Gerätes und wählen Sie "WIFI Cam_******", um eine Verbindung herzustellen. 1 2 3 4 56 8 9 7 10 11 Allgemeines Smartphone-Halterung Kamera-Licht Regler Kamera LED-Taschenlampe Taschenlampenschalter Metallringhaken 1 2 3 4 5 6 7 8 9 10 Kabelanschluss Smartphone-Ständer Zurücksetzen Netzschalter 11 Strom-/Batterieanzeige HERUNTERLADEN DER APP Verwenden Sie das Endoskop mit der App "Smart Endoscope". Sie können die App im Apple Store/Google Play herunterladen oder die QR-Codes unten scannen. Smart Endoscope + 製品の詳細について 使用手順 アプリの使い方について ごデバイスを使用して内視鏡を接続します 1.プローブをデバイスインターフェイ スに取り付けます。 青いライトが常に点灯:作動状態 赤いライトが点滅:バッテリーの残量が低い状態 赤いライトが常に点灯:パワーダウン状態で充電 紫のライトが常に点灯:パワーオン状態で充電 4.アプリ「Smart Endoscope」を開き、 ボタンをクリ ックし、「Wi-Fiエンドスコープ」を追加してから使用 可能です。 1.設定: クリックし先端カメラ/側面カメラ/デュアル ビュー(デュアルレンズのみ)を切り替える 2. 回転: クリックして画像を回転させる 3.画面ミラーリング: クリックして画面ミラーリング 4.アルバム: クリックして撮った写真/ビデオを確認する 5.撮影ボタン: クリックして写真/動画を撮る 6.写真: クリックして写真撮影モードに入る 7.動画: クリックして動画撮影モードに入る 2. [ON/OFF]ボタンをクリックします。 電源インジケータの青いLEDライト が常に点灯します。 3.スマホやその他のデバイスのWiFi設定に入り、 「WiFi Cam _ *****」のという対象を検索し、 出たら接続します。 1 2 3 4 56 8 9 7 10 11 製品の詳細について スマホホルダー カメラLEDライト調節ボタン カメラ フラッシュライト フラッシュライトスイッチ ケーブルリング 1 2 3 4 5 6 7 8 9 10 ホースコネクター スマホスタンド リセットボタン（穴） 電源スイッチ 11 電量インジケーター アプリをダウンロード 「Smart Endoscope」というアプリを通じて本製品を使います。 ※スマホのアプリストアかもしくは以下のQRコードをスキャンしてアプ リのダウンロードができます。 Smart Endoscope Model: WF200 + 安全上のご注意 バッテリーについて メンテナンスについて 本製品をご使用前に、取扱説明書中の各種注意事項及び使用 説明を必ずお読みください。マニュアルの操作違反より、危険または設備 の破損を引き起こす可能性があります。 本製品をきれいに保てください。石油水その他の危険物との直接 接触をお避けください。 警告！ • 本製品を静かかつ清潔な環境でご使用ください。 • 本製品は体の不自由な方に適用していません。 • 本製品は医療目的や人体に使用しないでください。 • お子様を製品に近づかせない、操作は絶対に禁止です！！ • 本製品をご使用する際には、姿勢のバランスを保ち、体をあまり傾け ないでください。 • 電源ボタンが赤く点滅する場合、製品に充電を行ってください。充電中 、赤いLEDライト/紫のLEDライトが常に点灯し、完全な充電後赤いLED ライトが消えます； • 本製品の充電を行うには、安全標準規格に満たす5V家庭用充電器をご 使用ください。 • 長期的に製品を放置された場合、少なくとも三ヵ月毎に一回の充電を 行ってください。長期間放置より、バッテリーが過放電現象が起こり 、修復不可のダメージが発生する恐れがあります。 • カメラレンズを清潔な状態に保ってください； • 壊れた場合は、自らの修理をお避けてください。購入先もしくはエージ ェントに連絡して、専門のメンテナンスサービスを受けてください。 • 製品仕様 CMOS 80° 30-80mm 最大1920*1080 DC 5V/1A 2000mAhリチウム電池 カメラIP67防水 2.4 Ghz 光学センサー 視野角 被写界深度 解像度 電源入力 バッテリー 防水規格 作動周波数 オッケー “Smart Endoscope"にロー カルネットワーク上のデバイ スを検索して接続します。 許可しない 写真を選択 すべての写真へのア 許可しない このアプリは、あなたが使ってい るネットワーク上のデバイスを発 見し、接続することができるよう になります “Smart Endoscope"から"写真" にアクセスしようとしています 本アプリがお客様のフォトアルバムにアクセス し、本アプリで撮影した写真や動画を閲覧する ことを許可するかどうかを設定します。 Wi-Fiエンドスコープ 写真 動画アルバムアルバム 設定 1 2 5 4 7 4 3 WIFI Camera_****** Wi-Fi 製品一覧 Sicherheit Batterie Wartung Bitte lesen Sie alle Sicherheitshinweise und alle Anweisun- gen, bevor Sie dieses Produkt verwenden. Die Nichtbeachtung der Warnhinweise und Anweisungen kann zu Stromschlag, Brand und schweren Verletzungen führen. Halten Sie das Werkzeug trocken, sauber, frei von Öl, Wasser, Gas oder anderen korrosionsfördernden Materialien. WARNUNG！ • Halten Sie den Arbeitsbereich sauber und gut beleuchtet. • Dieses Gerät ist nicht zur Verwendung durch Personen mit eingeschränk- ten körperlichen, sensorischen oder geistigen Fähigkeiten bestimmt. • Dieses Gerät ist nicht für den medizinischen Gebrauch oder die persönli- che Untersuchung bestimmt. • Halten Sie Unbeteiligte und Kinder während des Betriebs des Geräts fern. • Achten Sie darauf, dass Sie sich nicht überheben, son…

Text truncated - open the document above for the full version.

Shenzhen Teslong Technology Co.,Ltd. Agent Authorization Address:2ndFloor,Block4,JinhuafaIndustrialPark,EastofDonghuan2avenue,Longhua, Shenzhe Company:Shenzhen Teslong Technology Co.,Ltd. n WeauthorizeMiCOMLabsInc.,575BoulderCourt,Pleasanton,California94566,USA, toactonourbehalfonallmattersconcerningthecertificationofabovenamed equipment. WedeclarethatMiCOMLabsInc.isallowedtoforwardallinformationrelatedtothe approvalandcertificationofequipmenttotheregulatoryagenciesasrequiredandto discussanyissuesconcerningtheapprovalapplication.Anyandallactscarriedoutby MiCOMLabsonourbehalfshallhavethesameeffectasactsofourown Model Number(s):WF200 Product Description:Digitial Borescope . Signature: Name:Richard Title Date:2023-1-5 :ViceGeneralManager Company: ShenzhenTeslongTechnologyCo.,Ltd

OfficeofEngineeringTechnology FederalCommunicationsCommission 7435OaklandMillsRoad Columbia,MD21046 US Shenzhen Teslong Technology Co.,Ltd. A Date: 2023-01-05 Subject; Request for Confidentiality FCC ID: 2AXAVWF2002302 To Whom It May Concern, Pursuant to the provisions of the Commission’s rules Title 47 Sections §0.457 and §0.459, we are requesting the Commission to withhold the following attachment(s) as confidential documents from public disclosure indefinitely. These documents contain detailed system and equipment descriptions and are considered as proprietary information in operation of the equipment. The public disclosure of these documents might be harmful to our company and would give competitors an unfair advantage in the market. SchematicDiagram BlockDiagram PartsList OperationalDescription Tune-upProcedure Itisourunderstandingthatallmeasurementtestreports,FCCIDlabelformatand correspondenceduringthecertificationreviewprocesscannotbegrantedasconfidential documentsandthisinformationwillbeavailableforpublicreviewoncethegrantofequipment authorizationisissued. Sincerely, Signature: Name:Richard Title:ViceGeneralManager

EUTConstructionalDetails(EUTPhotos) External photo FCC ID:2AXAVWF2002302 1 photo2 photo3 photo4 photo5 photo6 photo7 Internal photo1 photo2 photo3 photo4 photo5 photo6

Externa FCC ID:2AXAVWF2002302 l photo1 photo2 photo3 photo4 photo5 photo6 photo7

Digitial Borescope 20230100001 Model Name:WF200 Powered by 3.7V Li-ion battery Input:5V⎓2600mAh FCC ID:2AXAVWF2002302 Manufacture NameShenzhen Teslong Technology Co.,Ltd 30mm 12mm Label locaton

Interna FCC ID:2AXAVWF2002302 l photo1 photo2 photo3 photo4 photo5 photo6

TRFNo.FCCRFExposure_R1 Add：WestSideof1/F.,BuildingC,ZoneA,FuyuanNewFactory,JiujiuIndustrialPark,Minzhu,Shatou,Shajing, Bao'anDistrict,Shenzhen,Guangdong,China Tel：+(86)0755-29852678Fax:+(86)0755-29852397E-mail：[email protected]:www.gdksign.com Page 1 of3 RFExposureEvaluation ApplicableStandard AccordingtoFCCpart2.1093andpart1.1307(b)(3),systemsoperatingundertheprovisionsofthissectionshallbe operatedinamannerthatensurethatthepublicisnotexposedtoradiofrequencyenergylevelinexcessofthe Commission'sguidelin FCCID:2AXAVWF2002302 e KDB447498D04InterimGeneralRFExposureGuidancev01，clause2.1.3SAR-BasedExemption: Amorecomprehensiveexemption,consideringavariablepowerthresholdthatdependsonboththeseparationdistance andpower,isprovidedin1.1307(b)(3)(i)(B).Thisexemptionisapplicabletothefrequencyrangebetween300MHzand6 GHz,withtestseparationdistancesbetween0.5cmand40cm,andforallRFsourcesinfixed,mobile,andportable deviceexposureconditions Accordingly,aRFsourceisconsideredanRFexemptdeviceifitsavailablemaximumtimeaveraged(matched conducted)poweroritseffectiveradiatedpower(ERP),whicheverisgreater,arebelowaspecifiedthreshold. Note:fisinGHz,distheseparationdistance(cm) Table1-ExamplePowerThresholds(mw) TESTRESULT PassedNotApplicable TRFNo.FCCRFExposure_R1 Add：WestSideof1/F.,BuildingC,ZoneA,FuyuanNewFactory,JiujiuIndustrialPark,Minzhu,Shatou,Shajing, Bao'anDistrict,Shenzhen,Guangdong,China Tel：+(86)0755-29852678Fax:+(86)0755-29852397E-mail：[email protected]:www.gdksign.com Page 2 of3 Wifi Testmode Channel Frequency (MHz) Max. Measured Power (dBm) Tuneup tolerance (dBm) Max.Tuneup Power Evaluation distance cm Exemption Limit (mW) dBmmw B/G/N202412 2.76±13.762.380.5 2.7 Note: -Thetune-uppowerwasdeclaredbytheapplicant -Themaximumantennagainis3.80dBi. -TomaintaincompliancewiththeRFexposureguidelines,placetheequipmentlessthan0.5cmfromnearbypersons Result:Compliant --THEEND--

Recognitionbook SPECIFICATIONFORAPPROVAL Name:WIFI/BT2.4/5.8GAntenna ItemNo:TYY-TX2208 Custoername:HangzhouRongmengIntelligentTechnologyCo.LTD Companystamp: drawing Customerapprove MADECHECKEDAPPROVED QIUjackMiketang DATE:2023.02.01DATE 1、Specifications Thereportprovidesatestoftheelectricalperformanceparametersofthe TYY-TX2208Technicalparametersofantennaelectricalappliances antenna,whichisascienceandtechnologymodel.TYY-TX2208WIFIBuiltin antenna,WIFIAntennaismadebycopperpipe+RFLinecomposition。（Asfollows 1Shown） Electricaltechnicalparameters 电性能指标 ElectricalSpecifications 频率范围 2.45/5.8GHZFrequencyRange2.45/5.8GHZ 电压驻波比 ≤2.0 VSWR ≤2.0 增益2～3DBI GAIN 2～3DBI 输入阻抗 50ΩInputImpedance50Ω 机械指标 MechanicalSpecifications 天线 颜色 黑色 AntennaColorBLACK 接口形式 IPEX-1InputconnectorIPEX-1 线长度 50mmCablelength50mm 工作温度-40°C~+85°C WorkingTemperature -40°C~+85°C 工作湿度 20~80%WorkingHumidity20~80% Chart1TYY-TX2208Productsize Chart2 TYY-TX2208Antennafinished (Threadlength130mm) Linelength 50+/-2mm，Theotherendwiththe1-IPEX。 Chart3 Locationofantennapatch Mattersneedingattention:WIFIantennabehindtheteartapeonthebackgluestickflatside,awayfromthe screenonthebackofthemetal,awayfromtheloudspeakerhardware,iftheantennanearthemetalleadtoWIFI signalfrequencydeviation,maketheantennastandingwaveratioandpowerandefficiencywillbecomepoor,and thesignalwillbecomeworse,thefrequencyshiftsignalvariationcanalsocauseinterference,somustbein accordancewithourmarkingthelocationoftheantenna,thankyou! 2.Electricalproperties 2.1WIFIAntennamatchingcircuit Thisitemmatchingcircuitisprovidedbythecustomer。 1 2 RF 4 3 Elementnumber 1234 WIFIoptimumNC0ohmNC Original(spare)50ohmmatching(inductancecapacitance/sunlordDarfon) Chart4OTAMicrowavedarkroom 2.3Bobbi(VSWR)test 2.3.1.Testsetup ConnecttheVSWRtestdeviceare:AgilentE5071Bnetworkanalyzerfrom50ohmcoaxialCable 120mmlong Brass&testfixture Processingtestfixture:50ohmantennaleadstoSMA-Jconnectorfromthetestpointon theplatePCBwitharigidcable,anda Connectthechoketube,andthensequentiallyconnectedwithotherdevices. WIFIInBobbi Chart5Returnloss 4.3Ddynamictestofthewholemachine 4.1Testsite TCTmicrowaveanechoicchamber:thetestfrequencyrangeis800mhZ-6ghz,thequietzone rangeis50cmcircle,andthereflectivityislessthan-90dB. Chart6AgilentE5071Cnetworkanalyzer ratio Chart 7WIFI VSWR standardLowfrequencyHighfrequency frequency (MHz) 2412244257005800 VSWR1.41.11.41.9 Chart8Elevationmapcoverage Chart9Elevationmapcoverage 3,recommendationsandconclusions Thisreportisbasedontheantennaelectricalperformancemeasured bythecustomerbasedonthefinalversionofthemodelprojectof HangzhouRongmengIntelligentTechnologyCo.,LTD. Ascanbeseenfromtheabovetestdata,theantennaprovidesgood electricalperformance. Tianyiyuanislookingforwardtoyourconfirmation.Thankyouforyour cooperation!

Page 1 of 72 Report No.: KS2211S5001E01 TRF EMC_R1 Add: West Side of 1/F., Building C, Zone A, Fuyuan New Factory, Jiujiu Industrial Park, Minzhu, Shatou, Shajing, Bao'an District, Shenzhen, Guangdong, China Tel: +(86) 0755-2985 2678 Fax: +(86) 0755-2985 2397 E-mail: [email protected] Web: www.gdksign.com TEST REPORT Report No. ........................... : KS2211S5001E01 FCC ID................................. : 2AXAVWF2002302 Applicant .............................. : Shenzhen Teslong Technology Co.,Ltd. Address ................................ : 2nd Floor, Block 4, Jinhuafa Industrial Park, East of Donghuan 2 avenue, Longhua, Shenzhen Manufacturer ........................ : Shenzhen Teslong Technology Co.,Ltd. Address ................................ : 2nd Floor, Block 4, Jinhuafa Industrial Park, East of Donghuan 2 avenue, Longhua, Shenzhen Product Name ...................... : Digital Borescope Model/Type reference .......... : WF200 Standard .............................. : 47 CFR Part 15.247 Date of Receipt .................... : November 17, 2022 Date of Test Date ................. : November 17, 2022 to January 4, 2023 Date of issue ........................ : January 4, 2023 Test result ........................... : Pass Prepared by: ( Printed name + Signature) Pai Zheng Approved by: ( Printed name + Signature) Sky Dong Testing Laboratory Name . : KSIGN(Guangdong) Testing Co., Ltd. Address ................................ : West Side of 1/F., Building C, Zone A, Fuyuan New Factory, Jiujiu Industrial Park, Minzhu, Shatou, Shajing, Bao'an District, Shenzhen, Guangdong, China This test report may be duplicated completely for legal use with the approval of the applicant. It should not be reproduced except in full, without the written approval of our laboratory. The client should not use it to claim product endorsement by KSIGN. The test results in the report only apply to the tested sample. The test report shall be invalid without all the signatures of testing engineers, reviewer and approver. Any objections must be raised to TSTLMS within 15 days since the date when the report is received. It will not be taken into consideration beyond this limit. The test report merely corresponds to the test sample. The report is invalid if it is not stamped with the "Testing Special Stamp" and the "Riding Seam Stamp". Page 2 of 72 Report No.: KS2211S5001E01 TRF EMC_R1 Add: West Side of 1/F., Building C, Zone A, Fuyuan New Factory, Jiujiu Industrial Park, Minzhu, Shatou, Shajing, Bao'an District, Shenzhen, Guangdong, China Tel: +(86) 0755-2985 2678 Fax: +(86) 0755-2985 2397 E-mail: [email protected] Web: www.gdksign.com TABLE OF CONTENTS Page 1. TEST SUMMARY .........................................................................................................................................3 1.1. Test Standards .......................................................................................................................................3 1.2. Report Version .......................................................................................................................................3 1.3. Test Description......................................................................................................................................4 1.4. Test Facility ............................................................................................................................................5 1.5. Measurement Uncertainty ......................................................................................................................6 2. GENERAL INFORMATION ..........................................................................................................................7 2.1. General Description Of EUT ..................................................................................................................7 2.2. Accessory Equipment Information .........................................................................................................7 2.3. Description of Test Modes ......................................................................................................................7 2.4. Measurement Instruments List...............................................................................................................8 3. EVALUATION RESULTS (EVALUATION) ................................................................................................ 12 3.1. Antenna requirement ........................................................................................................................... 12 4. RADIO SPECTRUM MATTER TEST RESULTS (RF) .............................................................................. 12 4.1. Conducted Emission at AC power line ................................................................................................ 12 4.2. Occupied Bandwidth ........................................................................................................................... 16 4.3. Maximum Conducted Output Power ................................................................................................... 17 4.4. Power Spectral Density ....................................................................................................................... 19 4.5. Band edge emissions (Radiated) ........................................................................................................ 20 4.6. Band edge emissions (Radiated) ........................................................................................................ 22 4.7. Raidated Spurious Emission (below 1GHz) ........................................................................................ 27 4.8. Raidated Spurious Emission (above 1GHz) ....................................................................................... 30 5. EUT TEST PHOTOS ............................................................................…

Text truncated - open the document above for the full version.

Emissionsinrestrictedfrequencybands(below1GHz FCC ID:2AXAVWF2002302 ) Emissionsinrestrictedfrequencybands(above1GHz) ConductedEmission