2AXCX-I80MAXAutomotive Diagnostic Tool

1 Premier Diagnostic Platform II i80 Max User's Manual V1.01 Trademarks FOXWELL is trademark of Shenzhen Foxwell Technology Co., Ltd. All other marks are trademarks or registered trademarks of their respective holders. Copyright Information ©2020 Shenzhen Foxwell Technology Co., Ltd. All rights reserved. Disclaimer The information, specifications and illustrations in this manual are based on the latest information available at the time of printing. Foxwell reserves the right to make changes at any time without notice. Visit our website at www.foxwelltech.us For Technical Assistance, send us email at [email protected] 2 Premier Diagnostic Platform II i80 Max User's Manual V1.01 Two-Year Limited Warranty Subject to the conditions of this limited warranty, Shenzhen Foxwell Technology Co., Ltd (“FOXWELL”) warrants its customer that this product is free of defects in material and workmanship at the time of its original purchase for a subsequent period of two (2) year. In the event this product fails to operate under normal use, during the warranty period, due to defects in materials and workmanship, FOXWELL will, at its sole option, either repair or replace the product in accordance with the terms and conditions stipulated herein. Terms and Conditions 1 If FOXWELL repairs or replaces the product, the repaired or replaced product shall be warranted for the remaining time of the original warranty period. No charge will be made to the customer for replacement parts or labor charges incurred by FOXWELL in repairing or replacing the defective parts. 2 The customer shall have no coverage or benefits under this limited warranty if any of the following conditions are applicable: a) The product has been subjected to abnormal use, abnormal conditions, improper storage, exposure to moisture or dampness, unauthorized modifications, unauthorized repair, misuse, neglect abuse, accident, alteration, improper installation, or other acts which are not the fault of FOXWELL, including damage caused by shipping. b) The Product has been damaged from external causes such as collision with an object, or from fire, flooding, sand, dirt, windstorm, lightning, earthquake or damage from exposure to weather conditions, an Act of God, or battery leakage, theft, blown fuse, improper use of any electrical source, or the product was used in combination or connection with other product, attachments, supplies or consumables not manufactured or distributed by FOXWELL. 3 The customer shall bear the cost of shipping the product to FOXWELL. And FOXWELL shall bear the cost of shipping the product back to the customer after the completion of service under this limited warranty. 4 FOXWELL does not warrant uninterrupted or error-free operation of the product. If a problem develops during the limited warranty period, the consumer shall take the following step-by-step procedure: a) The customer shall return the product to the place of purchase for repair or replacement processing, contact your local FOXWELL distributor or visit our website www.foxwelltech.us to get further information. 3 Premier Diagnostic Platform II i80 Max User's Manual V1.01 b) The customer shall include a return address, daytime phone number and/or fax number, complete description of the problem and original invoice specifying date of purchase and serial number. c) The customer will be billed for any parts or labor charges not covered by this limited warranty. d) FOXWELL will repair the Product under the limited warranty within 30 days after receipt of the product. If FOXWELL cannot perform repairs covered under this limited warranty within 30 days, or after a reasonable number of attempts to repair the same defect, FOXWELL at its option, will provide a replacement product or refund the purchase price of the product less a reasonable amount for usage. e) If the product is returned during the limited warranty period, but the problem with the product is not covered under the terms and conditions of this limited warranty, the customer will be notified and given an estimate of the charges the customer must pay to have the product repaired, with all shipping charges billed to the customer. If the estimate is refused, the product will be returned freight collect. If the product is returned after the expiration of the limited warranty period, FOXWELL’ normal service policies shall apply and the customer will be responsible for all shipping charges. 5 ANY IMPLIED WARRANTY OF MERCHANTABILITY, OR FITNESS FOR A PARTICULAR PURPOSE OR USE, SHALL BE LIMITED TO THE DURATION OF THE FOREGOINGLIMITED WRITTEN WARRANTY. OTHERWISE, THE FOREGOING LIMITED WARRANTY IS THE CONSUMER’S SOLE AND EXCLUSIVE REMEDY AND IS IN LIEU OF ALL OTHER WARRANTIES, EXPRESS OR IMPLIED. FOXWELL SHALL NOT BE LIABLE FOR SPECIAL, INCIDENTAL, PUNITIVE OR CONSEQUENTIAL DAMAGES, INCLUDING BUT NOT LIMITED TO LOSS OF ANTICIPATED BENEFITS OR PROFITS, LOSS OF SAVINGS OR REVENUE, LOSS OF DATA, PUNITIVE DAMAGES, LOSS OF USE OF THE PRODUCT OR ANY ASSOCIATED EQUIPMENT, COST OF CAPITAL, COST OF ANY SUBSTITUTE EQUIPMENT OR FACILITIES, DOWNTIME, THE CLAIMS OF ANY THIRD PARTIES, INCLUDING CUSTOMERS, AND INJURY TO PROPERTY, RESULTING FROM THE PURC HASE OR USE OF THE PRODUCT OR ARISING FROM BREACH OF THE WARRANTY, BREACH OF CONTRACT, NEGLIGENCE, STRICT TORT, OR ANY OTHER LEGAL OR EQUITABLE THEORY, EVEN IF FOXWELL KNEW OF THE LIKELIHOOD OF SUCH DAMAGES. FOXWELL SHALL NOT BE LIABLE FOR DELAY IN RENDERING SERVICE UNDER THE LIMITED WARRANTY, OR LOSS OF USE DURING THE PERIOD THAT THE PRODUCT IS BEING REPAIRED. 6. Some states do not allow limitation of how long an implied warranty lasts, so the one-year warranty limitation may not apply to you (the Consumer). Some states do not allow the exclusion or limitation of incidental and 4 Premier Diagnostic Platform II i80 Max User's Manual V1.01 consequential damages, so certain of the above limitations or exclusions may not apply to you (the Consumer). This limited warranty gives th…

Text truncated - open the document above for the full version.

ShenzhenFoxwellTechnologyCo.,Ltd Office of Engineering Technology Federal Communications Commission 7435 Oakland Mills Road Columbia, MD 21046 USA Date:2020-11-11 Subject; Request for Long Term Confidentiality FCC ID: 2AXCX-I80MAX To Whom It May Concern, Pursuant to the provisions of the Commission’s rules Title 47 Sections §0.457 and §0.459, we are requesting the Commission to withhold the following attachment(s) as confidential documents from public disclosure indefinitely. These documents contain detailed system and equipment descriptions and are considered as proprietary information in operation of the equipment. The public disclosure of these documents might be harmful to our company and would give competitors an unfair advantage in the market. Schematic Diagram Block Diagram Parts List Operational Description Tune-up Procedure It is our understanding that all measurement test reports, FCC ID label format and correspondence during the certification review process cannot be granted as confidential documents and this information will be available for public review once the grant of equipment authorization is issued. Sincerely, Signature: Name: Yalin Yang Title: Manager

Shenzhen Foxwell Technology Co., Ltd Agent Aut horization Company: Shenzhen Foxwell Technology Co., Ltd Address: 5/F, Plant C, Baocheng 71st Zone, Xin'an Street, Baoan District, Shenzhen, 518106 China Product Name: Automotive Diagnostic Tool Model Number(s): i80Max Product Description: Automotive Diagnostic Tool We authorize MiCOM Labs Inc., 575 Boulder Court, Pleasanton, California 94566, USA, to act on our behalf on all matters concerning the certification of above named equipment. We dec lare that MiCOM Labs Inc. is allowed to forward all information related to the approval and certification of equipment to the regulatory agencies as required and to discuss any issues concerning the approval application. Any and all acts carried out by M iCOM Labs on our behalf shall have the same effect as acts of our own. Signature: Date: 2020-11-11 Name:Yalin Yang Title:Manager Company: Shenzhen Foxwell Technology Co., Ltd

Page 1 of 5 Appendix C: Photographs of EUT Product: Automotive Diagnostic Tool Model: i80Max External Photos Page 2 of 5 Page 3 of 5 Page 4 of 5 Page 5 of 5

Label Artwork and Location Model: i80Max Label: Size: L*W=180*45mm Label Location

Page 1 of 9 Appendix C: Photographs of EUT Product: Automotive Diagnostic Tool Model: i80Max Internal Photos Antenna Page 2 of 9 Page 3 of 9 Page 4 of 9 Page 5 of 9 Page 6 of 9 Page 7 of 9 Page 8 of 9 Page 9 of 9

RF exposure evaluation §2.1093 Radiofrequency radiation exposure evaluation: Portable Devices. According to§15.247(i) and§1.1307b(1), systems operating under the provisions of this section shall be operated in a manner that ensures that the public is not exposed to radio frequency energy level in excess of the commission’s guidance. The 1-g SAR test exclusion thresholds for 100 MHz to 6 GHz at test separation distances ≤ 50 mm are determined by: [(max. power of channel, including tune-up tolerance, mW) / (min. test separation distance, mm)] · [√f(GHz)] ≤ 3.0 for 1-g SAR, where  f(GHz) is the RF channel transmit frequency in GHz  Power and distance are rounded to the nearest mW and mm before calculation  When the minimum test separation distance is < 5 mm, a distance of 5 mm according is applied to determine SAR test exclusion.  The result is rounded to one decimal place for comparison  Channel Frequency (GHz) Max. Power (dBm) Tune up Power (dBm) Max. Tune up Power (dBm) Max. Tune up Power (mW) Test distance (mm) Result exclusion thresholds for 1-g SAR CH 39 2.441 5.65 5±1 6 3.98 5 1.24 3.0 Result: Base on the calculation value, No SAR measurement is required.

Hotline: 400-6611-140 Tel: 86-755-27673339 Fax: 86-755-27673332 http://www.tct-lab.com TEST REPORT FCC ID: 2AXCX-I80MAX Product: Automotive Diagnostic Tool Model No.: i80Max Additional Model No.: N/A Trade Mark: FOXWELL Report No.: TCT200819E006 Issued Date: Nov. 13, 2020 Issued for: Shenzhen Foxwell Technology Co., Ltd 5/F, Plant C, Baocheng 71st Zone, Xin'an Street, Baoan District, Shenzhen, 518106 China Issued By: Shenzhen Tongce Testing Lab. 1B/F., Building 1, Yibaolai Industrial Park, Qiaotou, Fuyong, Baoan District, Shenzhen, Guangdong, China TEL: +86-755-27673339 FAX: +86-755-27673332 Note: This report shall not be reproduced except in full, without the written approval of Shenzhen Tongce Testing Lab. This document may be altered or revised by Shenzhen Tongce Testing Lab. personnel only, and shall be noted in the revision section of the document. The test results in the report only apply to the tested sample. Report No.: TCT200819E006 Page 2 of 93 Hotline: 400-6611-140 Tel: 86-755-27673339 Fax: 86-755-27673332 http://www.tct-lab.com TABLE OF CONTENTS 1. Test Certification ..................................................................................... 3 2. Test Result Summary .............................................................................. 4 3. EUT Description ....................................................................................... 5 4. General Information ................................................................................. 6 4.1. Test environment and mode ................................................................................. 6 4.2. Description of Support Units ................................................................................ 6 5. Facilities and Accreditations .................................................................. 7 5.1. Facilities ................................................................................................................. 7 5.2. Location ................................................................................................................. 7 5.3. Measurement Uncertainty ..................................................................................... 7 6. Test Results and Measurement Data ..................................................... 8 6.1. Antenna requirement ............................................................................................ 8 6.2. Conducted Emission ............................................................................................. 9 6.3. Conducted Output Power ................................................................................... 13 6.4. 20dB Occupy Bandwidth .................................................................................... 14 6.5. Carrier Frequencies Separation ......................................................................... 15 6.6. Hopping Channel Number .................................................................................. 17 6.7. Dwell Time ............................................................................................................ 18 6.8. Pseudorandom Frequency Hopping Sequence ................................................ 19 6.9. Conducted Band Edge Measurement ................................................................ 20 6.10.Conducted Spurious Emission Measurement .................................................. 21 6.11.Radiated Spurious Emission Measurement ..................................................... 22 Appendix A: Test Result of Conducted Test Appendix B: Photographs of Test Setup Appendix C: Photographs of EUT Report No.: TCT200819E006 Page 3 of 93 Hotline: 400-6611-140 Tel: 86-755-27673339 Fax: 86-755-27673332 http://www.tct-lab.com 1. Test Certification Product: Automotive Diagnostic Tool Model No.: i80Max Additional Model No.: N/A Trade Mark: FOXWELL Applicant: Shenzhen Foxwell Technology Co., Ltd Address: 5/F, Plant C, Baocheng 71st Zone, Xin'an Street, Baoan District, Shenzhen, 518106 China Manufacturer: Shenzhen Foxwell Technology Co., Ltd Address: 5/F, Plant C, Baocheng 71st Zone, Xin'an Street, Baoan District, Shenzhen, 518106 China Date of Test: Aug. 20, 2020 – Nov. 13, 2020 Applicable Standards: FCC CFR Title 47 Part 15 Subpart C Section 15.247 FCC KDB 558074 D01 15.247 Meas Guidance v05r02 ANSI C63.10:2013 The above equipment has been tested by Shenzhen Tongce Testing Lab. and found compliance with the requirements set forth in the technical standards mentioned above. The results of testing in this report apply only to the product/system, which was tested. Other similar equipment will not necessarily produce the same results due to production tolerance and measurement uncertainties. Tested By: Date: Nov. 13, 2020 Kevin Huang Reviewed By: Date: Nov. 13, 2020 Beryl Zhao Approved By: Date: Nov. 13, 2020 Tomsin Report No.: TCT200819E006 Page 4 of 93 Hotline: 400-6611-140 Tel: 86-755-27673339 Fax: 86-755-27673332 http://www.tct-lab.com 2. Test Result Summary Requirement CFR 47 Section Result Antenna Requirement §15.203/§15.247 (c) PASS AC Power Line Conducted Emission §15.207 PASS Conducted Peak Output Power §15.247 (b)(1) PASS 20dB Occupied Bandwidth §15.247 (a)(1) PASS Carrier Frequencies Separation §15.247 (a)(1) PASS Hopping Channel Number §15.247 (a)(1) PASS Dwell Time §15.247 (a)(1) PASS Radiated Emission §15.205/§15.209 PASS Band Edge §15.247(d) PASS Note: 1. PASS: Test item meets the requirement. 2. Fail: Test item does not meet the requirement. 3. N/A: Test case does not apply to the test object. 4. The test result judgment is decided by the limit of test standard. Report No.: TCT200819E006 Page 5 of 93 Hotline: 400-6611-140 Tel: 86-755-27673339 Fax: 86-755-27673332 http://www.tct-lab.com 3. EUT Description Product: Automotive Diagnostic Tool Model No.: i80Max Additional Model No.: N/A Trade Mark: FOXWELL Bluetooth Version: V3.0 Operation Frequency: 2402MHz~2480MHz Transfer Rate: 1/2/3 Mbits/s Number o…

Text truncated - open the document above for the full version.

Report No.: TCT200819E006 Page 61 of 93 Hotline: 400-6611-140 Tel: 86-755-27673339 Fax: 86-755-27673332 http://www.tct-lab.com Conducted RF Spurious Emission Mode Frequency (MHz) Max Value (dBc) Limit (dBc) Verdict 1-DH1 2402 -54.45 -20 Pass 1-DH1 2441 -47.07 -20 Pass 1-DH1 2480 -48.62 -20 Pass 2-DH1 2402 -51.99 -20 Pass 2-DH1 2441 -54.13 -20 Pass 2-DH1 2480 -53.63 -20 Pass 3-DH1 2402 -53.73 -20 Pass 3-DH1 2441 -54.31 -20 Pass 3-DH1 2480 -53.47 -20 Pass Tx. Spurious NVNT 1-DH1 2402MHz Ref Report No.: TCT200819E006 Page 62 of 93 Hotline: 400-6611-140 Tel: 86-755-27673339 Fax: 86-755-27673332 http://www.tct-lab.com Tx. Spurious NVNT 1-DH1 2402MHz Emission Tx. Spurious NVNT 1-DH1 2441MHz Ref Report No.: TCT200819E006 Page 63 of 93 Hotline: 400-6611-140 Tel: 86-755-27673339 Fax: 86-755-27673332 http://www.tct-lab.com Tx. Spurious NVNT 1-DH1 2441MHz Emission Tx. Spurious NVNT 1-DH1 2480MHz Ref Report No.: TCT200819E006 Page 64 of 93 Hotline: 400-6611-140 Tel: 86-755-27673339 Fax: 86-755-27673332 http://www.tct-lab.com Tx. Spurious NVNT 1-DH1 2480MHz Emission Tx. Spurious NVNT 2-DH1 2402MHz Ref Report No.: TCT200819E006 Page 65 of 93 Hotline: 400-6611-140 Tel: 86-755-27673339 Fax: 86-755-27673332 http://www.tct-lab.com Tx. Spurious NVNT 2-DH1 2402MHz Emission Tx. Spurious NVNT 2-DH1 2441MHz Ref Report No.: TCT200819E006 Page 66 of 93 Hotline: 400-6611-140 Tel: 86-755-27673339 Fax: 86-755-27673332 http://www.tct-lab.com Tx. Spurious NVNT 2-DH1 2441MHz Emission Tx. Spurious NVNT 2-DH1 2480MHz Ref Report No.: TCT200819E006 Page 67 of 93 Hotline: 400-6611-140 Tel: 86-755-27673339 Fax: 86-755-27673332 http://www.tct-lab.com Tx. Spurious NVNT 2-DH1 2480MHz Emission Tx. Spurious NVNT 3-DH1 2402MHz Ref Report No.: TCT200819E006 Page 68 of 93 Hotline: 400-6611-140 Tel: 86-755-27673339 Fax: 86-755-27673332 http://www.tct-lab.com Tx. Spurious NVNT 3-DH1 2402MHz Emission Tx. Spurious NVNT 3-DH1 2441MHz Ref Report No.: TCT200819E006 Page 69 of 93 Hotline: 400-6611-140 Tel: 86-755-27673339 Fax: 86-755-27673332 http://www.tct-lab.com Tx. Spurious NVNT 3-DH1 2441MHz Emission Tx. Spurious NVNT 3-DH1 2480MHz Ref Report No.: TCT200819E006 Page 70 of 93 Hotline: 400-6611-140 Tel: 86-755-27673339 Fax: 86-755-27673332 http://www.tct-lab.com Tx. Spurious NVNT 3-DH1 2480MHz Emission Report No.: TCT200819E006 Page 71 of 93 Hotline: 400-6611-140 Tel: 86-755-27673339 Fax: 86-755-27673332 http://www.tct-lab.com Number of Hopping Channel Mode Hopping Number Limit Verdict 1-DH1 79 15 Pass 2-DH1 79 15 Pass 3-DH1 79 15 Pass Hopping No. NVNT 1-DH1 2441MHz Report No.: TCT200819E006 Page 72 of 93 Hotline: 400-6611-140 Tel: 86-755-27673339 Fax: 86-755-27673332 http://www.tct-lab.com Hopping No. NVNT 2-DH1 2441MHz Hopping No. NVNT 3-DH1 2441MHz Report No.: TCT200819E006 Page 73 of 93 Hotline: 400-6611-140 Tel: 86-755-27673339 Fax: 86-755-27673332 http://www.tct-lab.com Dwell Time Mode Frequency (MHz) Pulse Time (ms) Total Dwell Time (ms) Period Time (ms) Limit (ms) Verdict 1-DH1 2441 0.374 119.680 31600 400 Pass 1-DH3 2441 1.632 261.168 31600 400 Pass 1-DH5 2441 2.880 307.200 31600 400 Pass 2-DH1 2441 0.383 122.688 31600 400 Pass 2-DH3 2441 1.636 261.696 31600 400 Pass 2-DH5 2441 2.883 307.520 31600 400 Pass 3-DH1 2441 0.384 123.008 31600 400 Pass 3-DH3 2441 1.830 292.848 31600 400 Pass 3-DH5 2441 2.886 307.787 31600 400 Pass Dwell NVNT 1-DH1 2441MHz Report No.: TCT200819E006 Page 74 of 93 Hotline: 400-6611-140 Tel: 86-755-27673339 Fax: 86-755-27673332 http://www.tct-lab.com Dwell NVNT 1-DH3 2441MHz Dwell NVNT 1-DH5 2441MHz Report No.: TCT200819E006 Page 75 of 93 Hotline: 400-6611-140 Tel: 86-755-27673339 Fax: 86-755-27673332 http://www.tct-lab.com Dwell NVNT 2-DH1 2441MHz Dwell NVNT 2-DH3 2441MHz Report No.: TCT200819E006 Page 76 of 93 Hotline: 400-6611-140 Tel: 86-755-27673339 Fax: 86-755-27673332 http://www.tct-lab.com Dwell NVNT 2-DH5 2441MHz Dwell NVNT 3-DH1 2441MHz Report No.: TCT200819E006 Page 77 of 93 Hotline: 400-6611-140 Tel: 86-755-27673339 Fax: 86-755-27673332 http://www.tct-lab.com Dwell NVNT 3-DH3 2441MHz Dwell NVNT 3-DH5 2441MHz Report No.: TCT200819E006 Page 78 of 93 Hotline: 400-6611-140 Tel: 86-755-27673339 Fax: 86-755-27673332 http://www.tct-lab.com Appendix B: Photographs of Test Setup Product: Automotive Diagnostic Tool Model: i80Max Radiated Emission Report No.: TCT200819E006 Page 79 of 93 Hotline: 400-6611-140 Tel: 86-755-27673339 Fax: 86-755-27673332 http://www.tct-lab.com Conducted Emission Report No.: TCT200819E006 Page 80 of 93 Hotline: 400-6611-140 Tel: 86-755-27673339 Fax: 86-755-27673332 http://www.tct-lab.com Appendix C: Photographs of EUT Product: Automotive Diagnostic Tool Model: i80Max External Photos Report No.: TCT200819E006 Page 81 of 93 Hotline: 400-6611-140 Tel: 86-755-27673339 Fax: 86-755-27673332 http://www.tct-lab.com Report No.: TCT200819E006 Page 82 of 93 Hotline: 400-6611-140 Tel: 86-755-27673339 Fax: 86-755-27673332 http://www.tct-lab.com Report No.: TCT200819E006 Page 83 of 93 Hotline: 400-6611-140 Tel: 86-755-27673339 Fax: 86-755-27673332 http://www.tct-lab.com Report No.: TCT200819E006 Page 84 of 93 Hotline: 400-6611-140 Tel: 86-755-27673339 Fax: 86-755-27673332 http://www.tct-lab.com Report No.: TCT200819E006 Page 85 of 93 Hotline: 400-6611-140 Tel: 86-755-27673339 Fax: 86-755-27673332 http://www.tct-lab.com Product: Automotive Diagnostic Tool Model: i80Max Internal Photos Report No.: TCT200819E006 Page 86 of 93 Hotline: 400-6611-140 Tel: 86-755-27673339 Fax: 86-755-27673332 http://www.tct-lab.com Report No.: TCT200819E006 Page 87 of 93 Hotline: 400-6611-140 Tel: 86-755-27673339 Fax: 86-755-27673332 http://www.tct-lab.com Report No.: TCT200819E006 Page 88 of 93 Hotline: 400-6611-140 Tel: 86-755-27673339 Fax: 86-755-27673332 http://www.tct-lab.com Report No.: TCT200819E006 Page 89 of 93 Hotline: 400-6611-140 Tel: 86-755-27673339 Fax: 86-755-27673332 http://www.tct-lab.com Report No.: TCT200819E006 Page 90 of 93 Hotline: 400-6611-140 Tel: 86-755-27673339 Fax: 86-755-27673332 http:/…

Text truncated - open the document above for the full version.

Page 1 of 2 Appendix B: Photographs of Test Setup Product: Automotive Diagnostic Tool Model: i80Max Radiated Emission Page 2 of 2 Conducted Emission