2AXGD-RPM1GARobot vacuum cleaner

注：此页面非印刷内容 R2380C- 美版 说明书 单色印刷： K55 210mm*140mm 材质：封面：157g 哑粉纸，单面过油；内页：68g 晨鸣云镜 骑马钉 A00 20231115 For more support, contact us via [email protected] Website: https://global.dreametech.com Tel: +1 (866) 977-5177 Manufactured by: Dreame Trading (Tianjin) Co., Ltd. Address: Room 2112-1-1, South District, Finance and Trade Center, No.6975 Yazhou Road, Dongjiang Bonded Port Area, Tianjin Pilot Free Trade Zone, Tianjin, China Made in China The word "dreame" is the abbreviation of Dreame Technology Co., Ltd. and its subsidiaries in China. It is the transliteration of the company's Chinese name "追觅", which means striving for excellence in every endeavor and reflects the company's vision of continuous pursuit, exploration and search in technology. User Manual Robot Vacuum and Mop The illustrations in this manual are for reference only. Please refer to the actual product. M1 P O W E R E D B Y D R E A M E RPM1GA-US-A00 1 EN Contents User Manual Manuel d'utilisation Manual de usuario 1 22 43 EN FR ES Safety Information IMPORTANT SAFETY INSTRUCTIONS · Do not use outdoors or on wet surfaces. · Do not allow to be used as a toy. Close attention is necessary when used by or near children, pets or plants. · Use only as described in this manual. Use only manufacturer’s recommended attachments. · Do not use with damaged cord or plug. If appliance is not working as it should, has been dropped, damaged, left outdoors, or dropped into water, return it to a service center. · Do not pull or carry by cord, use cord as a handle, close a door on cord, or pull cord around sharp edges or corners. Do not run appliance over cord. Keep cord away from heated surfaces. · Do not unplug by pulling on cord. To unplug, grasp the plug, not the cord. · Do not handle the charging dock, including charger plug, and charger terminals with wet hands. · Do not put any object into openings. Do not use with any opening blocked; keep free of dust, lint, hair, and anything that may reduce air flow. When using an electrical appliance, basic precautions should always be followed, including the following: READ ALL INSTRUCTIONS BEFORE USING (THIS APPLIANCE), Failure to follow the warnings and instructions may result in electric shock, fire and/or serious injury. WARNING – To reduce the risk of fire, electric shock, or injury: 23 ENEN Safety Information · Keep hair, loose clothing, fingers, and all parts of body away from openings and moving parts. · Do not use to pick up flammable or combustible liquids, such as gasoline, or use in areas where they may be present. · Do not pick up anything that is burning or smoking, such as cigarettes, matches, or hot ashes. · Do not use without dust box and filter in place. · Prevent unintentional starting. Ensure the switch is in the off-position before connecting to battery pack, picking up or carrying the appliance. Carrying the appliance with your finger on the switch or energizing the appliance that has the switch on invites accidents. · Do not use and store in extremely hot or cold environments (below 0 °C / 32 °F or above 40 °C /104 °F ). Please charge the robot in temperature above 0 °C / 32 °F and below 40 °C /104 °F . · Recharge only with the charger specified by the manufacturer. A charger that is suitable for one type of battery pack may create a risk of fire when used with another battery pack. · Use appliances only with specifically designated battery packs. Use of any other battery packs may create a risk of injury and fire. · When battery pack is not in use, keep it away from other metal objects, like paper clips, coins, keys, nails, screws or other small metal objects, that can make a connection from one terminal to another. Shorting the battery terminals together may cause burns or a fire. · Under abusive conditions, liquid may be ejected from the battery; avoid contact. If contact accidentally occurs, flush with water. If liquid contacts eyes, additionally seek medical help. Liquid ejected from the battery may cause irritation or burns. · Do not use a battery pack or appliance that is damaged or modified. Damaged or modified batteries may exhibit unpredictable behavior resulting in fire, explosion or risk of injury. · Do not expose a battery pack or appliance to fire or excessive temperature. Exposure to fire or temperature above 130°C may cause explosion. · Follow all charging instructions and do not charge the battery pack or appliance outside of the temperature range specified in the instructions. Charging improperly or at temperatures outside of the specified range may damage the battery and increase the risk of fire. Safety Information · Have servicing performed by a qualified repair person using only identical replacement parts. This will ensure that the safety of the product is maintained. · Do not modify or attempt to repair the appliance or the battery pack except as indicated in the instructions for use and care. · Place the cords from other appliances out of the area to be cleaned. · Do not operate the vacuum in a room where an infant or child is sleeping. · Do not operate the vacuum in an area where there are lit candles or fragile objects on the floor to be cleaned. · Do not operate the vacuum in a room that has lit candles on furniture that the vacuum may accidentally hit or bump into. · Do not allow children to sit on the vacuum. · Do not use the vacuum on a wet surface. · Use only with Dreame Trading (Tianjin) Co., Ltd. RCM11 charging dock. Use only with Dongguan Sunun Power Co., Ltd SA182H-200090U charger or Chanzeho Technology (HK) Co Ltd CZH024200090USWM charger. · Risk Of Injury. Brush May Start Unexpectedly. Switch off the appliance and Remove the brush Before Cleaning or Servicing. · Unplug before cleaning or servicing. Caution: This device complies with Part 15 of the FCC Rules / Innovation, Science and Economic Development Canada’s licence- exempt RSS(s). Operation is subject to the following two conditions: (1) this device may not cause harmful interference. …

Text truncated - open the document above for the full version.

Dreame Trading (Tianjin) Co.,Ltd. 012423-17 rev2 Certification Application Attestation Statements Date: Dec 7, 2023 American Certification Body, Inc. 313 Park Avenue Suite 300 Falls Church, VA 22046 To Whom It May Concern: Statement for 47 CFR section 2.911(d)(5)(i) ______( Dreame Trading (Tianjin) Co.,Ltd.)______ certifies that as of the date of the application the equipment for which authorization is sought is not “covered” equipment 1 prohibited from receiving an equipment authorization pursuant to section 2.903 of the FCC rules. If the equipment for which the applicant seeks authorization is produced by any of the entities identified on the current Covered List, including affiliates or subsidiaries of the named companies, the applicant must include an explanation on why the equipment is not “covered” equipment. Additional Explanation: <N/A> Statement for 47 CFR section 2.911(d)(5)(ii) ______( Dreame Trading (Tianjin) Co.,Ltd.)______ (“the applicant”) certifies that, as of the date of the filing of this application, the applicant ☐ - is / ☒ - is not identified on the Covered List as an entity producing “covered” equipment. Thank you, By: __________________________ ____ Joyce Mo ____________ (Signature 2 ) (Print name) Title: _______ Certified Engineer ________ Company: _ Dreame Trading (Tianjin) Co.,Ltd._Telephone: 13451734209__ 1 - The Commission’s Covered List is published by the Public Safety and Homeland Security Bureau and posted on the Commission’s website. This Covered List, which is periodically updated, identifies particular equipment, produced by particular entities, that constitutes “covered” equipment. https://www.fcc.gov/supplychain/coveredlist . 2 - Letters should be placed on appropriate letterhead.

FCCUSAgent,LLC 092723-17Rev9 U.S.AgentDesignationforServiceofProcess (ApplicantandU.S.AgentareSeparateParties) TO:AmericanCertificationBody,Inc. 313ParkAvenue Suite300 FallsChurch,VA22046 ATTENTION:FCCCertification–Section2.911(d)(7)Information DesignatedU.S.Agent CompanyName:FCCUSAgent,LLC ContactName:TimPayne StreetAddress:3722IllinoisAvenue City/Province/Zip:SaintCharles,IL,60174,USA TelephoneNo:708-571-3148 Email:[email protected] FRN#:0033402884 Thisletteristoconfirmthatwe(“theDesignatedU.S.Agent)haveacceptedthe responsibilitytoactastheDesignatedU.S.AgentforServiceofProcessasrequiredby section47CFR2.911(d)(7)onbehalfoftheApplicantnotedbelow. U.S.AgentSignature: Date:12/20/2023 Signedby(PrintedName/Title):TimPayne/Manager TheApplicantacknowledgesthattheymustmaintainanagentfornolessthanoneyear afterterminatingallmarketingandimportationORtheconclusionofanyCommission- relatedproceedinginvolvingtheequipment.Theapplicantfurtheracknowledgestheir responsibilitytoinformtheFCCwhenevertheDesignatedU.S.Agentinformationabove changes. Applicant Companyname:DreameTrading(Tianjin)Co.,Ltd. GranteeCode:2AXGD FCCID:2AXGD-RPM1GA FRN#:0029939097 ContactName:JoyceMo StreetAddress:Room2112-1-1,SouthDistrict,FinanceandtradeCenter,6975Yazhou Road,DongjiangBondedPortArea,TianjinPilotFreeTradeZone,300463Tianjin, China City/Province/Zip:Tianjin,China300463 TelephoneNo:13451734209 Email:[email protected] ApplicantSignature 1 : Date:12/20/2023 Signedby(PrintedName/Title):CertificateManager 1 - Lettersmustbeplacedonappropriateletterhead.Thesigneefortheapplicantmustbeoneofthefollowing:Applicant(grantee) contactofrecordintheFCC’sauthorizationsystem,orauthorizedofficersoremployeeoftheapplicant(grantee).

Dreame Trading (Tianjin) Co.,Ltd. Authority to Act as Agent Date: Dec 7, 2023 American Certification Body, Inc. 6731 Whittier Avenue Suite C110 McLean, VA 22101 To Whom It May Concern: _____Intertek Testing Service Shanghai______ is authorized to act on our behalf, until otherwise notified, for applications to American Certification Body, Inc. (ACB). We certify that we are not subject to denial of federal benefits, that includes FCC benefits, pursuant to Section 5301 of the Anti-Drug Abuse Act of 1988, 21 U.S.C. 862. Further, no party, as defined in 47 CFR 1.2002 (b), to the application is subject to denial of federal benefits, that includes FCC benefits. We also declare that the information provided to the FCC is true and correct to the best of our knowledge (47 CFR 2.911(d)) and we have been informed of the grantee responsibilities (47 CFR 2.909) with regard to certified equipment. Thank you, Agency Agreement Expiration Date: _____Dec 31, 2024 By: _______________ ____ _ Joyce Mo____________ (Signature 1 ) (Print name) Title: ______ Certified Engineer____________________ On behalf of: __ Dreame Trading (Tianjin) Co.,Ltd.________________ (Company Name) Telephone: _____ 13451734209___________________ 1 - Must be signed by applicant contact given for applicant on the FCC site, or by the authorized agent if an appropriate authorized agent letter has been provided. Letters should be placed on appropriate letterhead.

Dreame Trading (Tianjin) Co.,Ltd. Request for Confidentiality Date: Dec 7, 2023 Subject: Confidentiality Request for: __FCC ID: 2AXGD-RPM1GA Pursuant to FCC 47 CFR 0.457(d) and 0.459, the applicant requests that a part of the subject FCC application be held confidential. Type of Confidentiality Requested Exhibit ☐ Short Term ☒ Permanent Block Diagrams ☐ Short Term External Photos ☐ Short Term ☐ Permanent * 1 Internal Photos ☐ Short Term ☒ Permanent Operation Description/Theory of Operation ☐ Short Term ☐ Permanent Parts List & Placement/BOM ☐ Short Term ☐ Permanent Tune-Up Procedure ☐ Short Term ☒ Permanent Schematics ☐ Short Term Test Setup Photos ☐ Short Term ☐ Permanent * 3 User’s Manual ______ Dreame Trading (Tianjin) Co.,Ltd. has spent substantial effort in developing this product and it is one of the first of its kind in industry. Having the subject information easily available to "competition" would negate the advantage they have achieved by developing this product. Not protecting the details of the design will result in financial hardship. Permanent Confidentiality: The applicant requests the exhibits listed above as permanently confidential be permanently withheld from public review due to materials that contain trade secrets and proprietary information not customarily released to the public. Short-Term Confidentiality: The applicant requests the exhibits selected above as short term confidential be withheld from public view for a period of ___(specify number of days not to exceed 180) 2 ___ days from the date of the Grant of Equipment Authorization and prior to marketing. This is to avoid premature release of sensitive information prior to marketing or release of the product to the public. Applicant is also aware that they are responsible to notify ACB in the event information regarding the product or the product is made available to the public before the requested period has expired. ACB will then release the documents listed above for public disclosure pursuant to FCC Public Notice DA 04-1705. NOTE for Industry Canada Applications: IC currently only distinguishes Permanent Confidentiality exhibits as shown above. Short Term confidentiality is not considered applicable to IC applications. Sincerely, By: Joyce Mo (Signature/Title 3 ) (Print name) 1 - The asterisked items (*) require further information to be provided to ACB before permanent confidentiality will be extended to these exhibits. Please refer to FCC KDB 726920 and the specific Document link for D01 found at: https://apps.fcc.gov/oetcf/kdb/forms/FTSSearchResultPage.cfm?switch=P&id=41731 and review section II, 3) regarding specific information that must accompany these requests. 2 - Please refer to http://acbcert.com/documents/misc-docs/Memo-Short-Term-Vs-Standard-Confidentiality.pdf for complete details. 3 - Must be signed by applicant contact given for applicant on the FCC site, or by the authorized agent if an appropriate authorized agent letter has been provided. Letters should be placed on appropriate letterhead.

Declaration Letter We Dreame Trading (Tianjin) Co.,Ltd. hereby declare that the product Robot Vacuum Cleaner: RPM1GA is not capable of operating with channel 12 and 13 in regions of US and Canada. Versions of the product available for import and sale in the US and Canada will not operate on channels 12 and 13. It will not be possible for users and configure these channels in the US and Canada version. By: _______ Joyce Mo _____ Title: Certified Engineer On behalf of: Dreame Trading (Tianjin) Co.,Ltd. Telephone: 13451734209

FCC ID: 2AXGD-RPM1GA IC: 26444-RPM1GA Page 1 of 3 External Picture FCC ID: 2AXGD-RPM1GA IC: 26444-RPM1GA Page 2 of 3 FCC ID: 2AXGD-RPM1GA IC: 26444-RPM1GA Page 3 of 3

主机铭牌 消银龙+哑膜 技术要求: 1.表面处理:哑膜 2.目测印刷颜色不能有较明显色差、 3.外观尺寸公差为0.15mm、 4.尺寸准确，印刷清楚，不能有毛边、 5.CE认证符号高度必须大于或等于5mm，垃圾桶高度必须大于或等于7mm 6.印刷区域不允许出现颗粒、针孔、气泡、划伤、夹杂外来物、断线、网痕、龟裂、橘皮、飞墨等缺陷; 7.要求:可通过高低温-20至60摄氏度，酒精耐磨测试。 8.所有材料需符合:包装指令，RoHs，REACH; 尺寸定位 40.60 65.60 R5.00 主机铭牌 Dreame Trading (Tianjin) Co., Ltd. Model/Modèle : RPM1GA Manufactured by/Fabriqué par : Address/Adresse : Room 2112-1-1, South District, Finance and Trade Center, No.6975 Yazhou Road, Dongjiang Bonded Port Area, Tianjin Pilot Free Trade Zone, Tianjin, China Use only with Dreame Trading (Tianjin) Co., Ltd. RCM11 charging dock À utiliser uniquement avec Dreame Trading (Tianjin) Co., Ltd. la station de recharge RCM11 For Household Use Only/Pour usage domestique seulement Production Date/Date de fabrication : Robotic Vacuum Cleaner/Aspirateur nettoyeur robot A款 Made in China/Fabriqué en Chine 11/2023 Conforms to UL Std. 1017 Certified to CSA Std. C22.2 No. 243 FCC ID: 2AXGD-RPM1GA IC: 26444-RPM1GA 5027941 Rated Voltage/Tension nominale : 14.4 V 广东旺家智能机器人有限公司 版本标记变更说明 签名 日期 机型：S800-美版 料号：N10.S800.018 图号： 比例：1:1 页数：1 OF 1 版次：A0 日期： 日期： 日期： 制 作 审 核 批 准 视角 名称 尺寸公差表 未注公差按此要求 公 差 塑 胶 EVA 尺 寸 五 金 橡 胶 重量： 材质： 2023.12.05 65.6*40.6mm/倒角R5/ 75#消银龙+15#哑膜+黑底白字 S/N: XXXXXXXXXXXXXXXXX 5MM 此处留空白厂内打印 此处留空白， 日期不需要印刷， 厂内打印 Dreame Trading (Tianjin) Co., Ltd. Model/Modèle : RPM1GA Manufactured by/Fabriqué par : Address/Adresse : Room 2112-1-1, South District, Finance and Trade Center, No.6975 Yazhou Road, Dongjiang Bonded Port Area, Tianjin Pilot Free Trade Zone, Tianjin, China Use only with Dreame Trading (Tianjin) Co., Ltd. RCM11 charging dock À utiliser uniquement avec Dreame Trading (Tianjin) Co., Ltd. la station de recharge RCM11 For Household Use Only/Pour usage domestique seulement Production Date/Date de fabrication : Robotic Vacuum Cleaner/Aspirateur nettoyeur robot Made in China/Fabriqué en Chine 11/2023 Conforms to UL Std. 1017 Certified to CSA Std. C22.2 No. 243 FCC ID: 2AXGD-RPM1GA IC: 26444-RPM1GA 5027941 Rated Voltage/Tension nominale : 14.4 V Dreame Trading (Tianjin) Co., Ltd. Model/Modèle : RPM1GA Manufactured by/Fabriqué par : Address/Adresse : Room 2112-1-1, South District, Finance and Trade Center, No.6975 Yazhou Road, Dongjiang Bonded Port Area, Tianjin Pilot Free Trade Zone, Tianjin, China Use only with Dreame Trading (Tianjin) Co., Ltd. RCM11 charging dock À utiliser uniquement avec Dreame Trading (Tianjin) Co., Ltd. la station de recharge RCM11 For Household Use Only/Pour usage domestique seulement Production Date/Date de fabrication : Robotic Vacuum Cleaner/Aspirateur nettoyeur robot Made in China/Fabriqué en Chine 11/2023 Conforms to UL Std. 1017 Certified to CSA Std. C22.2 No. 243 FCC ID: 2AXGD-RPM1GA IC: 26444-RPM1GA 5027941 Rated Voltage/Tension nominale : 14.4 V

FCC ID: 2AXGD-RPM1GA IC: 26444-RPM1GA Page 1 of 5 Internal Picture FCC ID: 2AXGD-RPM1GA IC: 26444-RPM1GA Page 2 of 5 antenna location FCC ID: 2AXGD-RPM1GA IC: 26444-RPM1GA Page 3 of 5 FCC ID: 2AXGD-RPM1GA IC: 26444-RPM1GA Page 4 of 5 FCC ID: 2AXGD-RPM1GA IC: 26444-RPM1GA Page 5 of 5

Dreame Trading (Tianjin) Co.,Ltd. MPE ASSESSMENT REPORT Report Type: FCC MPE assessment report Model: RPM1GA REPORT NUMBER: 2309A0774SHA-003 ISSUE DATE: Dec 11, 2023 DOCUMENT CONTROL NUMBER: TTRFFCCMPE-01_V1 © 2018 Intertek Intertek Testing Services Shanghai Building No.86, 1198 Qinzhou Road (North) Caohejing Development Zone Shanghai 200233, China Telephone: 86 21 6127 8200 www.intertek.com TEST REPORT This report is for the exclusive use of Intertek's Client and is provided pursuant to the agreement between Intertek and its Client. Intertek's responsibility and liability are limited to the terms and conditions of the agreement. Intertek assumes no liability to any party, other than to the Client in accordance with the agreement, for any loss, expense or damage occasioned by the use of this report. Only the Client is authorized to permit copying or distribution of this report and then only in its entirety. Any use of the Intertek name or one of its marks for the sale or advertisement of the tested material, product or service must first be approved in writing by Intertek. The observations and test results in this report are relevant only to the sample tested. This report by itself does not imply that the material, product, or service is or has ever been under an Intertek certification program. TTRFFCCMPE-01_V1© 2018 Intertek Page 2 of 8 Report no.: 2309A0774SHA-003 Applicant: Dreame Trading (Tianjin) Co., Ltd. Room 2112-1-1, South District, Finance and trade Center, 6975 Yazhou Road, Dongjiang Bonded Port Area, Tianjin Pilot Free Trade Zone, 300463 Tianjin, China Manufacturer: Dreame Trading (Tianjin) Co., Ltd. Room 2112-1-1, South District, Finance and trade Center, 6975 Yazhou Road, Dongjiang Bonded Port Area, Tianjin Pilot Free Trade Zone, 300463 Tianjin, China FCC ID: 2AXGD-RPM1GA SUMMARY: The equipment complies with the requirements according to the following standard(s) or Specification: KDB447498 D01 General RF Exposure Guidance v06 FCC Part2.1091, FCC Part2.1093 FCC Part1.1307(b) PREPARED BY: REVIEWED BY: Project Engineer Teddy Yin Reviewer Wakeyou Wang Report No.: 2309A0774SHA-003 TEST REPORT TTRFFCCMPE-01_V1© 2018 Intertek Page 3 of 8 Revision History Report No. Version Description Issued Date 2309A0774SHA-003 Rev. 01 Initial issue of report Dec 11, 2023 Report No.: 2309A0774SHA-003 TEST REPORT TTRFFCCMPE-01_V1© 2018 Intertek Page 4 of 8 1 GENERAL INFORMATION 1.1 Description of Equipment Under Test (EUT) Product name: Robot vacuum cleaner Type/Model/PMN/HVIN: RPM1GA Description of EUT: The appliance covered by this report is automatically battery-powered vacuum cleaner and dry pick up for household indoor use only. The EUT contains WIFI mode and BLE mode. This report is for BLE mode. Rating: DC 14,4V Charging dock: RCM11 Input: DC 20V, 0,9A Output: DC 20V, 0,9A Adaptor: SA182H-200090V Input: 100-240V~, 50/60Hz, 0,4A; Output: 20,0VDC, 0,9A, 18W. Class II Adaptor: CZH024200090EUWM Input: 100-240V~, 50/60Hz, 0,8A Max; Output: 20,0VDC, 0,9A, 18W. Class II EUT type: Table top Floor standing Software Version: V1.0 Hardware Version: WSDK.20Q2.0000.00 Sample No.: 0230910-04-003 Sample received date: Oct 26, 2023 Date of test: Oct 26~Nov 19, 2023 1.2 Technical Specification WIFI Frequency Range: 2412MHz ~ 2462MHz Support Standards: IEEE 802.11b, IEEE 802.11g, IEEE 802.11n-HT20, IEEE 802.11n-HT40 Type of Modulation: IEEE 802.11b: DSSS (CCK, DQPSK, DBPSK) IEEE 802.11g: OFDM (64-QAM, 16-QAM, QPSK, BPSK) IEEE 802.11n-HT20: OFDM (64-QAM, 16-QAM, QPSK, BPSK) IEEE 802.11n-HT40: OFDM (64-QAM, 16-QAM, QPSK, BPSK) Channel Number: 11 Channels for 802.11b, 802.11g and 802.11n(HT20) 7 Channels for 802.11n(HT40) Data Rate: IEEE 802.11b: Up to 11 Mbps IEEE 802.11g: Up to 54 Mbps IEEE 802.11n-HT20: Up to MCS7 IEEE 802.11n-HT40: Up to MCS7 Channel Separation: 5 MHz Antenna Information: 2.37dBi, FPCB antenna Report No.: 2309A0774SHA-003 TEST REPORT TTRFFCCMPE-01_V1© 2018 Intertek Page 5 of 8 BLE Frequency Range: 2402-2480MHz Support Standards: Bluetooth LE 5.0 Type of Modulation: GFSK Channel Number: 40 Data Rate: 1Mbps Channel Separation: 2MHz Antenna Information: 2.37dBi, FPCB antenna 1.3 Description of Test Facility Name: Intertek Testing Services Shanghai Address: Building 86, No. 1198 Qinzhou Road(North), Shanghai 200233, P.R. China Telephone: 86 21 61278200 Telefax: 86 21 54262353 The test facility is recognized, certified, or accredited by these organizations: CNAS Accreditation Lab Registration No. CNAS L0139 FCC Accredited Lab Designation Number: CN0175 IC Registration Lab CAB identifier.: CN0014 VCCI Registration Lab Registration No.: R-14243, G-10845, C-14723, T-12252 A2LA Accreditation Lab Certificate Number: 3309.02 Report No.: 2309A0774SHA-003 TEST REPORT TTRFFCCMPE-01_V1© 2018 Intertek Page 6 of 8 2 MPE Assessment Test result: Pass 2.1 MPE Assessment Limit Mobile device exposure for standalone operations: Frequency range E-field strength (V/m) H-field strength (A/m) B-field (uT) Equivalent plane wave power density S eq (W/m 2 ) 0-1 Hz - 3,2 × 10 4 4 × 10 4 - 1-8 Hz 10 000 3,2 × 10 4 /f 2 4 × 10 4 /f 2 - 8-25 Hz 10 000 4 000/f 5 000/f - 0,025-0,8 kHz 250/f 4/f 5/f - 0,8-3 kHz 250/f 5 6,25 - 3-150 kHz 87 5 6,25 - 0,15-1 MHz 87 0,73/f 0,92/f - 1-10 MHz 87/f 1/2 0,73/f 0,92/f - 10-400 MHz 28 0,073 0,092 2 400-2 000 MHz 1,375 f 1/2 0,0037 f 1/2 0,0046 f 1/2 f/200 2-300 GHz 61 0,16 0,20 10 Mobile device exposure for simultaneous transmission operations: the sum of the MPE ratios for all simultaneously transmitting antennas incorporated in a host device is ≤ 1.0 Report No.: 2309A0774SHA-003 TEST REPORT TTRFFCCMPE-01_V1© 2018 Intertek Page 7 of 8 2.2 Assessment Results Power density (S) is calculated according to the formula: S = PG / (4πR²) Where S = power density in mW/cm² P = Radiated transmit power in mW G = numeric gain of transmit antenna R = distance (cm) As we can see from the test report 2309A0774SHA-001: The maximum WIFI radiated power = 16.87dBm = 48.64 mW; Here R is chosen to be 20cm,…

Text truncated - open the document above for the full version.

Dreame Trading (Tianjin) Co.,Ltd. RF TEST REPORT Report Type: FCC Part 15.247 & ISED RSS-247 RF report Model: RPM1GA REPORT NUMBER: 2309A0774SHA-002 ISSUE DATE: Dec 11, 2023 DOCUMENT CONTROL NUMBER: TTRF15.247-02_V1 © 2018 Intertek Intertek Testing Services Shanghai Building No.86, 1198 Qinzhou Road (North) Caohejing Development Zone Shanghai 200233, China Telephone: 86 21 6127 8200 www.intertek.com TEST REPORT This report is for the exclusive use of Intertek's Client and is provided pursuant to the agreement between Intertek and its Client. Intertek's responsibility and liability are limited to the terms and conditions of the agreement. Intertek assumes no liability to any party, other than to the Client in accordance with the agreement, for any loss, expense or damage occasioned by the use of this report. Only the Client is authorized to permit copying or distribution of this report and then only in its entirety. Any use of the Intertek name or one of its marks for the sale or advertisement of the tested material, product or service must first be approved in writing by Intertek. The observations and test results in this report are relevant only to the sample tested. This report by itself does not imply that the material, product, or service is or has ever been under an Intertek certification program. TTRF15.247-02_V1 © 2018 Intertek Page 2 of 38 Report no.: 2309A0774SHA-002 Applicant: Dreame Trading (Tianjin) Co., Ltd. Room 2112-1-1, South District, Finance and trade Center, 6975 Yazhou Road, Dongjiang Bonded Port Area, Tianjin Pilot Free Trade Zone, 300463 Tianjin, China Manufacturer: Dreame Trading (Tianjin) Co., Ltd. Room 2112-1-1, South District, Finance and trade Center, 6975 Yazhou Road, Dongjiang Bonded Port Area, Tianjin Pilot Free Trade Zone, 300463 Tianjin, China FCC ID: 2AXGD-RPM1GA IC: 26444-RPM1GA SUMMARY: The equipment complies with the requirements according to the following standard(s) or Specification: 47CFR Part 15 (2021): Radio Frequency Devices (Subpart C) ANSI C63.10 (2013): American National Standard of Procedures for Compliance Testing of Unlicensed Wireless Devices RSS-247 Issue 2 (February 2017): Digital Transmission Systems (DTSs), Frequency Hopping Systems (FHSs) and Licence-Exempt Local Area Network (LE-LAN) Devices RSS-Gen Issue 5 (April 2018)+A1(March 2019)+A2(February 2021): General Requirements for Compliance of Radio Apparatus PREPARED BY: REVIEWED BY: Project Engineer Teddy Yin Reviewer Wakeyou Wang Report No.: 2309A0774SHA-002 TEST REPORT TTRF15.247-02_V1 © 2018 Intertek Page 3 of 38 Content REVISION HISTORY................................................................................................................................................ 5 MEASUREMENT RESULT SUMMARY ..................................................................................................................... 6 1 GENERAL INFORMATION ............................................................................................................................. 7 1.1 DESCRIPTION OF EQUIPMENT UNDER TEST (EUT) ..................................................................................................... 7 1.2 TECHNICAL SPECIFICATION .................................................................................................................................... 7 1.3 DESCRIPTION OF TEST FACILITY .............................................................................................................................. 8 2 TEST SPECIFICATIONS ................................................................................................................................... 9 2.1 STANDARDS OR SPECIFICATION ............................................................................................................................... 9 2.2 MODE OF OPERATION DURING THE TEST ................................................................................................................... 9 2.3 TEST SOFTWARE LIST .......................................................................................................................................... 10 2.4 TEST PERIPHERALS LIST ....................................................................................................................................... 10 2.5 TEST ENVIRONMENT CONDITION: .......................................................................................................................... 10 2.6 INSTRUMENT LIST .............................................................................................................................................. 11 2.7 MEASUREMENT UNCERTAINTY ............................................................................................................................. 12 3 MINIMUM 6DB BANDWIDTH ..................................................................................................................... 13 3.1 LIMIT .............................................................................................................................................................. 13 3.2 MEASUREMENT PROCEDURE ............................................................................................................................... 13 3.3 TEST CONFIGURATION ........................................................................................................................................ 13 3.4 TEST RESULTS OF MINIMUM 6DB BANDWIDTH ....................................................................................................... 13 4 MAXIMUM CONDUCTED OUTPUT POWER AND E.I.R.P. ............................................................................. 14 4.1 LIMIT .............................................................................................................................................................. 14 4.2 MEASUREMENT PROCEDURE ................................................................................................…

Text truncated - open the document above for the full version.

Dreame Trading (Tianjin) Co.,Ltd. RF TEST REPORT Report Type: FCC Part 15.247 & ISED RSS-247 RF report Model: RPM1GA REPORT NUMBER: 2309A0774SHA-001 ISSUE DATE: Dec 11, 2023 DOCUMENT CONTROL NUMBER: TTRF15.247-03_V1 © 2018 Intertek Intertek Testing Services Shanghai Building No.86, 1198 Qinzhou Road (North) Caohejing Develop…

Text truncated - open the document above for the full version.