2AXJ4VX20AX1800 Mesh Wi-Fi 6 System with Built-in Smart Speaker

Deco Voice X20AX1800 Mesh Wi-Fi 6 System with built-in Smart Speaker User Guide 1910012991 REV1.0.0 © 2021 TP-Link ContentsAbout This Guide ···················································· 1Appearance ······························································· 2Set Up Your Deco ··················································· 3Add More Decos ····················································· 7Enable Alexa Voice Service ······························· 8Enable Bluetooth Connection ························· 9Dashboard ································································10Check Deco Status ·············································11Set Main Deco ························································12Manage Connected Devices ·························13Sort Devices By Locations ······························14Create New Networks ········································15Remove/Reboot Deco ·······································17Add Smart Devices ··············································18 Shortcut ·····································································19Automation ·······························································21HomeShield ·····························································25Upgrade Your Deco ·············································26Wi-Fi Settings··························································27Blacklist ······································································28WPS ··············································································29Weekly/Monthly Reports ··································30Managers ··································································31Advanced Features ·············································33FAQ ···············································································38 1 About This GuideThis guide provides a brief introduction to Deco Mesh Wi-Fi 6 System with Built-in Smart Speaker and the Deco app, as well as r egulatory information. Features available in Deco may vary by model and software version. Deco availability may also vary by region or ISP. All images , steps, and descriptions LQWKLVJXLGHDUHRQO\H[DPSOHVDQGPD\QRWUHưHFW\RXUDFWXDO 'HFRH[SHULHQFH ConventionsIn this guide, the following conventions are used: Convention Description Deco Stands for Deco Whole Home Mesh Wi-Fi System/Unit. Underline Hyperlinks are in teal and underlined. You can click to UHGLUHFWWRDZHEVLWHRUDVSHFLƮFVHFWLRQ Teal Key information appears in teal, including management page text such as menus, items, buttons and so on. Note: Ignoring this type of note might result in a malfunction or damage to the device. Tips: Indicates important information that helps you make better use of your device. More Info• 6SHFLƮFSURGXFWLQIRUPDWLRQFDQEHIRXQGRQWKHSURGXFWSDJHDW  https://www.tp-link.com . • A Technical Community is provided for you to discuss our products at https://community.tp-link.com . • Our Technical Support contact information can be found at the Help center of the Deco app and the Contact Technical Support page at https://www.tp-link.com/support . Speed/Coverage/Device Quantity DisclaimerMaximum wireless signal rates are the physical rates derived from IEEE 6WDQGDUGVSHFLƮFDWLRQV$FWXDOZLUHOHVVGDWDWKURXJKSXW DQG wireless coverage, and quantity of connected devices are not guaranteed and will vary as a result of network conditions, client limitations, and environmental factors, including building materials, obstacles, volume and GHQVLW\RIWUDƱFDQGFOLHQWORFDWLRQMU-MIMO DisclaimerUse of MU-MIMO requires clients to also support MU-MIMO.IoT Compatibility DisclaimerIoT compatibility refers only to smart devices that can be controlled via the Deco app. Other wireless devices can still connect to Deco for normal Wi-Fi use.Seamless Roaming DisclaimerClients need to support 802.11k/v/r and may require additional set up. Performance may vary depending on the client device.HomeShield DisclaimerHomeShield includes the Free Basic Plan. Fees apply for the Pro Plan. Visit tp-link.com/homeshield for more information. Use your phone, tablet or computer as a remote control for Spotify. Go to spotify.com/connect to learn how. The Spotify Software is subject to third party licenses found here: www.spotify.com/connect/third-party-licenses . 2 AppearanceEach Deco has an LED above the Deco logo to indicate the wireless network status, two RJ-45 Ethernet ports, a power slot, and a Reset button. The Action button, Mute button, Volume buttons and the Alexa Attention State LED on the top are provided to better control your Dec o with voice. See the explanation below: Yellow pulse:Deco is resetting.Yellow solid:Deco is starting up.Blue pulse:Deco is ready for setup.Blue solid:Deco is setting up.White pulse:'HFRLVXSJUDGLQJƮUPZDUHWhite solid:'HFRLVUHJLVWHUHGDQGDOOLVZHOORed pulse:'HFRLVGLVFRQQHFWHGIURPPDLQ'HFRRed solid:Deco has an issue. Press for 1 s econd and release to reset Deco to factory default settings. 7KHOLJKWWXUQLQJSXOVLQJ\HOORZLQGLFDWHVDVXFFHVVIXOUHVHWReset Button: Action Button: Wake Alexa, interrupt an Alexa response, or stop an alert. Mute Button: 'LVDEOHWKHPLFURSKRQHDQG \RXFDQQRWJLYH$OH[DDFRPPDQG Volume-up Button Volume-down Button Alexa Attention State LED: Wi-Fi Signal LED: 3UHVHQWWKHSHUVRQDOLW\DQGFXUUHQWDFWLYLW\RI$OH[DYLDDV\V WHPRIFRORUVDQGDQLPDWLRQV Ethernet Ports: )RUFRQQHFWLQJ'HFRWR\RXUPRGHPWKH(WKHUQHWRXWOHWRURWKHU LQWHUQHWGHYLFHV Power Slot: )RUFRQQHFWLQJ'HFRWRWKHSRZHUVRFNHWYLDWKHSURYLGHGSRZHU DGDSWHU For details, refer to Attention system states . 3 Set Up Your DecoThe intuitive Deco app guides you through an easy setup process that gets each unit up and running and all your devices connect ed and online. Follow the steps below to set up your Deco Mesh Wi-Fi 6 System with Built-in Smart Speaker. 1. Download and install…

Text truncated - open the document above for the full version.

TP-Link Corporation Limited Authority to Act as Agent Date: 2021-04-23 American Certification Body, Inc. 6731 Whittier Avenue Suite C110 McLean, VA 22101 To Whom It May Concern: BTL Inc./Rose Liu is authorized to act on our behalf, until otherwise notified, for applications to American Certification Body, Inc. (ACB). We certify that we are not subject to denial of federal benefits, that includes FCC benefits, pursuant to Section 5301 of the Anti-Drug Abuse Act of 1988, 21 U.S.C. 862. Further, no party, as defined in 47 CFR 1.2002 (b), to the application is subject to denial of federal benefits, that includes FCC benefits. Thank you, Agency Agreement Expiration Date: 2022-04-23 By: __________________________ _______Abby Liang________ (Signature 1 ) (Print name) Title: Regulatory Compliance Manager On behalf of: TP-Link Corporation Limited (Company Name) Telephone: 00852-37585503 1 - Must be signed by applicant contact given for applicant on the FCC site, or by the authorized agent if an appropriate authorized agent letter has been provided. Letters should be placed on appropriate letterhead.

TP-Link Corporation Limited Request for Confidentiality Date: 2021-04-23 Subject: Confidentiality Request for: 2AXJ4VX20 Pursuant to FCC 47 CRF 0.457(d) and 0.459 and IC RSP-100, Section12.4, the applicant requests that a part of the subject FCC application be held confidential. Type of Confidentiality Requested Exhibit Short Term Permanent Block Diagrams Short Term External Photos Short Term Permanent* 1 Internal Photos Short Term Permanent Operation Description/Theory of Operation Short Term Permanent Parts List & Placement/BOM Short Term Permanent Tune-Up Procedure Short Term Permanent Schematics Short Term Test Setup Photos Short Term Permanent* 3 User’s Manual TP-Link Corporation Limited____ has spent substantial effort in developing this product and it is one of the first of its kind in industry. Having the subject information easily available to "competition" would negate the advantage they have achieved by developing this product. Not protecting the details of the design will result in financial hardship. Permanent Confidentiality: The applicant requests the exhibits listed above as permanently confidential be permanently withheld from public review due to materials that contain trade secrets and proprietary information not customarily released to the public. Short-Term Confidentiality: The applicant requests the exhibits selected above as short term confidential be withheld from public view for a period of ___(specify number of days not to exceed 180) 2 ___ days from the date of the Grant of Equipment Authorization and prior to marketing. This is to avoid premature release of sensitive information prior to marketing or release of the product to the public. Applicant is also aware that they are responsible to notify ACB in the event information regarding the product or the product is made available to the public. ACB will then release the documents listed above for public disclosure pursuant to FCC Public Notice DA 04-1705. NOTE for Industry Canada Applications: IC currently only distinguishes Permanent Confidentiality exhibits as shown above. Short Term confidentiality is not considered applicable to IC applications. Sincerely, By: /Regulatory Compliance Manager _Abby Liang__________ (Signature/Title 3 ) (Print name) 1 - The asterisked items (*) require further information to be provided to ACB before permanent confidentiality will be extended to these exhibits. Please refer to FCC KDB 726920 and the specific Document link for D01 found at: https://apps.fcc.gov/oetcf/kdb/forms/FTSSearchResultPage.cfm?switch=P&id=41731 and review section II, 3) regarding specific information that must accompany these requests. 2 - Please refer to http://acbcert.com/documents/misc-docs/Memo-Short-Term-Vs-Standard-Confidentiality.pdf for complete details. 3 - Must be signed by applicant contact given for applicant on the FCC site, or by the authorized agent if an appropriate authorized agent letter has been provided. Letters should be placed on appropriate letterhead.

TP-Link Corporation Limited Supplier’s Declaration of Conformity This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) This device must accept any interference received, including interference that may cause undesired operation. Manufacturer: TP-Link Corporation Limited, Room 901, 9/F. , New East Ocean Centre, 9 Science Museum Road, Tsim Sha Tsui, Kowloon,Hong Kong U.S. Responsible Party: TP-Link USA Corporation, d/b/a TP-Link North America, Inc. 145 South State College Blvd. Suite 400, Brea, CA 92821 Contact Person: Tel.: 00852-37585503 Email: [email protected] Internet: https://www.tp-link.com Model: Deco Voice X20 Classification: FCC Part 15B We hereby declare that the equipment bearing the trade name and model number specified above was tested conforming to the applicable FCC rule part(s) 15B and the most accurate measurement standards. We confirm that the necessary steps have been taken and are in force to assure that production units of the same equipment will continue to comply with the Commission’s requirements. 2021.04.23 ------------- -------------------- Date: Signature:

Project No.: 2101C102 Page 1 of 18 ATTACHMENT PHOTOGRAPHS OF EUT Project No.: 2101C102 Page 2 of 18 Project No.: 2101C102 Page 3 of 18 Project No.: 2101C102 Page 4 of 18 Project No.: 2101C102 Page 5 of 18

C B A 12 C 345678 B E D D A 9 料号： 12345 E 6789 Pantone 877C 白色 Pantone 877C Pantone 877C Deco Voice X20 1.0_产品规格标贴 A2 100#珠光合成纸+雾膜 音锥-170 Deco Voice X20 1.0 陈映徽 2021-01-29 增加方形外框，圆形标贴可撕 备注： 1）S/N码由工厂用 23*6(7210500124) 空白标贴打印，贴于产品规格标贴指定位置； 2）MAC地址、SSID由工厂直接打印于产品规格标贴指定位置。 MAC：条码由“XXXXXXXXXXXX”生成，文本格式写成“XX-XX-XX-XX-XX-XX”；具体内容以软件生成为准 SSID：“Deco_”为固定内容，XXXX为MAC地址后四位（大写），具体内容以软件生成为准 3）图示条码均为示意，具体请以生产实际为准。 文字转曲（来料效果图） MADE IN CHINA AX1800 Mesh Wi-Fi 6 System with Built-in Smart Speaker Model: Deco Voice X20 FCC ID: 2AXJ4VX20 Power: 12V 1.5A Suite 901, New East Ocean Centre, Tsim Sha Tsui, Hong Kong TP-Link Corporation Limited This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference. (2) This device must accept any interference received, including interference that may cause undesired operation. 201-210020 D 21 0007 201 IEEE 802.11b/g/n/ax IEEE 802.11a/n/ac/ax W52 W53W56 Model:Deco Voice X20(US) Ver:1.0 S/N:XXXXXXXXXXXXX MAC:XX-XX-XX-XX-XX-XX SSID:Deco_XXXX Label Location

Project No.: 2101C102 Page 6 of 18 Project No.: 2101C102 Page 7 of 18 Project No.: 2101C102 Page 8 of 18 Project No.: 2101C102 Page 9 of 18 Project No.: 2101C102 Page 10 of 18 Project No.: 2101C102 Page 11 of 18 Project No.: 2101C102 Page 12 of 18 Project No.: 2101C102 Page 13 of 18 Project No.: 2101C102 Page 14 of 18 Project No.: 2101C102 Page 15 of 18 Project No.: 2101C102 Page 16 of 18 Project No.: 2101C102 Page 17 of 18 BT & LE Antenna Project No.: 2101C102 Page 18 of 18 2.4G & 5G Antenna 1 2.4G & 5G Antenna 2

Report No.: BTL-FCCP-1-2101C102 Page 1 of 90 FCC Radio Test Report FCC ID: 2AXJ4VX20 This report concerns: Original Grant Project No. : 2101C102 Equipment : AX1800 Mesh Wi-Fi 6 System with Built-in Smart Speaker Brand Name : tp-link Test Model : Deco Voice X20 Series Model : N/A Applicant : TP-Link Corporation Limited Address : Room 901, 9/F. , New East Ocean Centre, 9 Science Museum Road, Tsim Sha Tsui, Kowloon, Hong Kong Manufacturer : TP-Link Corporation Limited Address : Room 901, 9/F. , New East Ocean Centre, 9 Science Museum Road, Tsim Sha Tsui, Kowloon, Hong Kong Date of Receipt : Jan. 11, 2021 Date of Test : Feb. 03, 2021 ~ May 17, 2021 Issued Date : May 19, 2021 Report Version : R02 Test Sample : Engineering Sample No.: DG2021020289 for conducted, DG2021020290 for radiated. Standard(s) : FCC CFR Title 47, Part 15, Subpart C FCC KDB 558074 D01 15.247 Meas Guidance v05r02 ANSI C63.10-2013 The above equipment has been tested and found compliance with the requirement of the relative standards by BTL Inc. Prepared by : Chella Zheng Approved by : Ethan Ma Add: No.3, Jinshagang 1 st Road, Shixia, Dalang Town,Dongguan, Guangdong, China. Te l : +86-769-8318-3000 Web: www.newbtl.com Report No.: BTL-FCCP-1-2101C102 Page 2 of 90 Declaration BTL represents to the client that testing is done in accordance with standard procedures as applicable and that test instruments used has been calibrated with standards traceable to international standard(s) and/or national standard(s). BTL’s reports apply only to the specific samples tested under conditions. It is manufacture’s responsibility to ensure that additional production units of this model are manufactured with the identical electrical and mechanical components. BTL shall have no liability for any declarations, inferences or generalizations drawn by the client or others from BTL issued reports. The report must not be used by the client to claim product certification, approval, or endorsement by NVLAP, NIST, A2LA, or any agency of the U.S. Government. This report is the confidential property of the client. As a mutual protection to the clients, the public and ourselves, the test report shall not be reproduced, except in full, without our written approval. BTL’s laboratory quality assurance procedures are in compliance with the ISO/IEC 17025 requirements, and accredited by the conformity assessment authorities listed in this test report. BTL is not responsible for the sampling stage, so the results only apply to the sample as received. The information, data and test plan are provided by manufacturer which may affect the validity of results, so it is manufacturer’s responsibility to ensure that the apparatus meets the essential requirements of applied standards and in all the possible configurations as representative of its intended use. Limitation For the use of the authority’s logo is limited unless the Test Standard(s)/Scope(s)/Item(s) mentioned in this test report is (are) included in the conformity assessment authorities acceptance respective. Please note that the measurement uncertainty is provided for informational purpose only and are not use in determining the Pass/Fail results. Report No.: BTL-FCCP-1-2101C102 Page 3 of 90 Table of Contents Page REPORT ISSUED HISTORY 6 1 . SUMMARY OF TEST RESULTS 7 1.1 TEST FACILITY 8 1.2 MEASUREMENT UNCERTAINTY 8 1.3 TEST ENVIRONMENT CONDITIONS 9 2 . GENERAL INFORMATION 10 2.1 GENERAL DESCRIPTION OF EUT 10 2.2 DESCRIPTION OF TEST MODES 11 2.3 PARAMETERS OF TEST SOFTWARE 12 2.4 BLOCK DIAGRAM SHOWING THE CONFIGURATION OF SYSTEM TESTED 13 2.5 SUPPORT UNITS 13 3 . AC POWER LINE CONDUCTED EMISSIONS 14 3.1 LIMIT 14 3.2 TEST PROCEDURE 14 3.3 D E V I AT I O N FROM TEST STANDARD 14 3.4 TEST SETUP 15 3.5 EUT OPERATING CONDITIONS 15 3.6 TEST RESULTS 15 4 . RADIATED EMISSIONS 16 4.1 LIMIT 16 4.2 TEST PROCEDURE 17 4.3 DEVIATION FROM TEST STANDARD 18 4.4 TEST SETUP 18 4.5 EUT OPERATING CONDITIONS 19 4.6 TEST RESULTS – 9 KHZ TO 30 MHZ 19 4.7 TEST RESULTS – 30 MHZ TO 1000 MHZ 19 4.8 TEST RESULTS – ABOVE 1000 MHZ 19 5 . NUMBER OF HOPPING FREQUENCY 20 5.1 LIMIT 20 5.2 TEST PROCEDURE 20 5.3 DEVIATION FROM STANDARD 20 5.4 TEST SETUP 20 5.5 EUT OPERATION CONDITIONS 20 Report No.: BTL-FCCP-1-2101C102 Page 4 of 90 Table of Contents Page 5.6 TEST RESULTS 20 6 . AVERAGE TIME OF OCCUPANCY 21 6.1 LIMIT 21 6.2 TEST PROCEDURE 21 6.3 DEVIATION FROM STANDARD 21 6.4 TEST SETUP 21 6.5 EUT OPERATION CONDITIONS 21 6.6 TEST RESULTS 21 7 . HOPPING CHANNEL SEPARATION 22 7.1 LIMIT 22 7.2 TEST PROCEDURE 22 7.3 DEVIATION FROM STANDARD 22 7.4 TEST SETUP 22 7.5 EUT OPERATION CONDITIONS 22 7.6 TEST RESULTS 22 8 . BANDWIDTH 23 8.1 LIMIT 23 8.2 TEST PROCEDURE 23 8.3 DEVIATION FROM STANDARD 23 8.4 TEST SETUP 23 8.5 EUT OPERATION CONDITIONS 23 8.6 TEST RESULTS 23 9 . MAXIMUM OUTPUT POWER 24 9.1 LIMIT 24 9.2 TEST PROCEDURE 24 9.3 DEVIATION FROM STANDARD 24 9.4 TEST SETUP 24 9.5 EUT OPERATION CONDITIONS 24 9.6 TEST RESULTS 24 10 . CONDUCTED SPURIOUS EMISSION 25 10.1 LIMIT 25 10.2 TEST PROCEDURE 25 10.3 DEVIATION FROM STANDARD 25 10.4 TEST SETUP 25 Report No.: BTL-FCCP-1-2101C102 Page 5 of 90 Table of Contents Page 10.5 EUT OPERATION CONDITIONS 25 10.6 TEST RESULTS 25 11 . MEASUREMENT INSTRUMENTS LIST 26 12 . EUT TEST PHOTO 28 APPENDIX A – AC POWER LINE CONDUCTED EMISSIONS 33 APPENDIX B – RADIATED EMISSION – 9 KHZ TO 30 MHZ 36 APPENDIX C – RADIATED EMISSION – 30 MHZ TO 1000 MHZ 41 APPENDIX D – RADIATED EMISSION – ABOVE 1000 MHZ 44 APPENDIX E – NUMBER OF HOPPING FREQUENCY 69 APPENDIX F – AVERAGE TIME OF OCCUPANCY 71 APPENDIX G – HOPPING CHANNEL SEPARATION 76 APPENDIX H – BANDWIDTH 78 APPENDIX I – MAXIMUM OUTPUT POWER 80 APPENDIX J – CONDUCTED SPURIOUS EMISSION 83 APPENDIX K – DECLARATION FOR BLUETOOTH DEVICE 88 Report No.: BTL-FCCP-1-2101C102 Page 6 of 90 REPORT ISSUED HISTORY Report Version Description Issued Date R00 Original Issue. Apr. 22, 2021 R01 Modified the comments of ACB. May 17, 2021 R02 Modified the comments of ACB. 1. Added the description in…

Text truncated - open the document above for the full version.

Report No.: BTL-FCCP-4-2101C102 Page 32 of 216 10. EUT TEST PHOTOS AC Power Line Conducted Emissions Test Photos Report No.: BTL-FCCP-4-2101C102 Page 33 of 216 Radiated Emissions Test Photos 9 kHz to 30 MHz Report No.: BTL-FCCP-4-2101C102 Page 34 of 216 Radiated Emissions Test Photos 30 MHz to 1 GHz Report No.: BTL-FCCP-4-2101C102 Page 35 of 216 Radiated Emissions Test Photos Above 1 GHz Report No.: BTL-FCCP-4-2101C102 Page 36 of 216 Conducted Test Photos