
Text extracted from the exhibit documents filed with the FCC. Open a document above to read the original.
JOC Australia Inc U.S. Agent Designation for Service of Process - Cert ification Attestation Letter 5/06/2023 ATTN.: Reviewing Engineer FCC ID: 2AXOX-TANGO Per section 2.911(d)(7) of the FCC rules, Shenzhen See Me Here Electronic Co.,Ltd ("the applicant") certifies that the equipment for which authorization is sought is designated to the fo ll ow in g U.S. agent* for serv ice of process: Company Name: JOC Australia Inc Physical U.S. Company Address: 18351 Colima Road Ste 585 Rowland Heights,California,91748 United States of America Agent contact name/Title : Benjamin.Smith/Vice President Agent Email Address: sales@丿ocinc.org/[email protected] Tel No.: +1(626) 217 2774 FRN No.: 0033379421 The above contact person accepts the obligation for service of process. The applicant accepts to maintain an agent for no less than one year after the grantee has terminated all marketing and importation or the conclusion of any Commission-related proceeding involving the equipment Agent Signed (if different to Applicant): Signed: Printed name: Benjamin. Smith Title: Vice President Company Name: JOC Australia Inc Date: 5/06/2023 Date: 5/06/2023 • the applicant must designate a contact located in the United States for purposes of acting as the applicant's agent for service of process, regardless of whether the applicant is a domestic or foreign entity. An applicant located in the United States may designate itself as the agent for service of process
Shenzhen See Me Here Electronic Co.,Ltd Agent Authorization Company: Shenzhen See Me Here Electronic Co.,Ltd Address: 1st Floor, 2nd Floor, 3rd Floor, 5th Floor, Building B, TongFuYu Industrial Park, No.32 Hangkong Road, Sanwei Community, Hangcheng Street, Bao'an district, Shenzhen, China Product Name: Wireless Speaker Model Number(s): TANGO Product Description: Wireless Speaker We authorize MiCOM Labs Inc., 575 Boulder Court, Pleasanton, California 94566, USA, to act on our behalf on all matters concerning the certification of above named equipment. We declare that MiCOM Labs Inc. is allowed to forward all information related to the approval and certification of equipment to the regulatory agencies as required and to discuss any issues concerning the approval application. Any and all acts carried out by MiCOM Labs on our behalf shall have the same effect as acts of our own. Signature: Date: 2023.4.6 Name: Jiankuai Li Title: PM Company: Shenzhen STS Test Services Co., Ltd.
Shenzhen See Me Here Electronic Co.,Ltd Office of Engineering Technology Federal Communications Commission 7435 Oakland Mills Road Columbia, MD 21046 USA Date: 2023.4.6 FCC ID: 2AXOX-TANGO To Whom It May Concern, Pursuant to the provisions of the Commission’s rules Title 47 Sections §0.457 and §0.459, we are requesting the Commission to withhold the following attachment(s) as confidential documents from public disclosure indefinitely. These documents contain detailed system and equipment descriptions and are considered as proprietary information in operation of the equipment. The public disclosure of these documents might be harmful to our company and would give competitors an unfair advantage in the market. Schematic Diagram Block Diagram Parts List Operational Description Tune-up Procedure In additional to above mentioned documents, in order to comply with the marketing regulations in Title 47 CFR §2.803 and the importation rules in Title 47 CFR §2.1204, while ensuring that business sensitive information remains confidential until the actual marketing of newly authorized devices, we request Short Term Confidentiality of the following attachment(s); External Photos Test Setup Photos Internal Photos User Manual For 45 days, pursuant to Public Notice DA 04-1705. OR For 180 days pursuant to KDB 726920 D01. It is our understanding that all measurement test reports, FCC ID label format and correspondence during the certification review process cannot be granted as confidential documents and this information will be available for public review once the grant of equipment authorization is issued. Sincerely, Signature: Name: Jiankuai Li Title: PM
Page 1 of 5 Report No.: STS2303056 APPENDIX-PHOTOGRAPHS OF EUT CONSTRUCTIONAL DETAILS Model: TANGO Photo 1 Photo 2 Page 2 of 5 Report No.: STS2303056 Photo 3 Photo 4 Page 3 of 5 Report No.: STS2303056 Photo 5 Photo 6 Page 4 of 5 Report No.: STS2303056 Photo 7 Photo 8 Page 5 of 5 Report No.: STS2303056 Photo 9
Wireless Speaker MIFA Model: TANGO Input: DC 5V 3A FCC ID: 2AXOX-TANGO Manufacture: MIFA INNOVATIONS LLC 30mm 5mm Black font on a white label 15mm
Page 1 of 5 Report No.: STS2303056 APPENDIX-PHOTOGRAPHS OF EUT CONSTRUCTIONAL DETAILS Model: TANGO Photo 1 Photo 2 BT/BLE Antenna Page 2 of 5 Report No.: STS2303056 Photo 3 Photo 4 Page 3 of 5 Report No.: STS2303056 Photo 5 Photo 6 Page 4 of 5 Report No.: STS2303056 Photo 7 Photo 8 Page 5 of 5 Report No.: STS2303056 Photo 9
Any reproduction of this document must be done in full. No single part of this document may be reproduced without permission from STS, all test data presented in this report is only applicable to presented test sample. Shenzhen STS Test Services Co., Ltd. A 1/F, Building B, Zhuoke Science Park, No.190 Chongqing Road, HepingShequ, Fuyong Sub-District, Bao’an District, Shenzhen, Guang Dong, China TEL: +86-755 3688 6288 FAX: +86-755 3688 6277 E-mail:[email protected] RADIO TEST REPORT Report No: STS2303056H02 Issued for Shenzhen See Me Here Electronic Co.,Ltd 1st Floor,2nd Floor,3rd Floor,5th Floor,Building B,TongFuYu Industrial Park,No.32 Hangkong Road,Sanwei Community,Hangcheng Street,Bao'an district,Shenzhen,China Product Name: Wireless Speaker Brand: MIFA Model Number: TANGO Series Model(s): N/A FCC ID: 2AXOX-TANGO Test Standard: FCC 47CFR §2.1093 S T L A B S Page 2 of 9 Report No.: STS2303056H02 Test Report Certification Applicant’s Name ................. : Shenzhen See Me Here Electronic Co.,Ltd Address ................................. : 1st Floor,2nd Floor,3rd Floor,5th Floor,Building B,TongFuYu Industrial Park,No.32 Hangkong Road,Sanwei Community,Hangcheng Street,Bao'an district,Shenzhen,China Manufacturer's Name .......... : MIFA INNOVATIONS LLC Address ................................. : Castle County 10 Cheswold Blvd,#1D,New Newark DE,Delaware 19713 US Product Description Product Name ........................ : Wireless Speaker Brand ................................... : MIFA Model Number ....................... : ... : TANGO Series Model(s) ..................... : N/A Standards ............................. : FCC 47CFR §2.1093 447498 D04 Interim General RF Exposure Guidance v01 This report shall not be reproduced except in full, without the written approval of STS, this document only be altered or revised by STS, personal only, and shall be noted in the revision of the document. Date of Test ........................................... : Date of receipt of test item ..................... : 16 Mar. 2023 Date (s) of performance of tests ............. : 16 Mar. 2023 ~ 23 Mar. 2023 Date of Issue .......................................... : 23 Mar. 2023 Test Result.............................................. : Pass Testing Engineer : (Chris Chen) Technical Manager : (Sean she) Authorized Signatory : (Bovey Yang) Page 3 of 9 Report No.: STS2303056H02 TABLE OF CONTENTS 1. GENERAL INFORMATION 5 1.1 GENERAL DESCRIPTION OF THE EUT 5 1.2 TEST FACTORY 5 2. FCC 47CFR §2.1093 REQUIREMENT 6 2.1 TEST STANDARDS 6 2.2 LIMIT 6 2.3 TEST RESULT 9 Page 4 of 9 Report No.: STS2303056H02 Revision History Rev. Issue Date Report No. Effect Page Contents 00 23 Mar. 2023 STS2303056H02 ALL Initial Issue Page 5 of 9 Report No.: STS2303056H02 1. GENERAL INFORMATION 1.1 GENERAL DESCRIPTION OF THE EUT Product Name Wireless Speaker Brand MIFA Model Number TANGO Series Model(s) N/A Model Difference N/A Product Description The EUT is Wireless Speaker Operation Frequency: 2402~2480 MHz Modulation Type: BT: GFSK(1Mbps), π/4-DQPSK(2Mbps), 8DPSK(3Mbps) BLE: GFSK Antenna gain: 2.01dBi Antenna Designation: FPC Antenna Rating Input: DC 5V 3A Output: DC 5V 1A Max Battery Rated Voltage:3.65V Charge Limit Voltage:5V Capacity: 5000mAh Hardware Version VER2.0 Software Version V1.9 1.2 TEST FACTORY SHENZHEN STS TEST SERVICES CO., LTD Add. : A 1/F, Building B, Zhuoke Science Park, No.190 Chongqing Road, HepingShequ, Fuyong Sub-District, Bao’an District, Shenzhen, Guang Dong, China FCC test Firm Registration Number: 625569 IC test Firm Registration Number: 12108A A2LA Certificate No.: 4338.01 Page 6 of 9 Report No.: STS2303056H02 2. FCC 47CFR §2.1093 REQUIREMENT 2.1 TEST STANDARDS Follow the maximum permissible exposure (MPE) limits specified in 447498 D04 Interim General Radio Frequency Exposure Guidelines v01. The gain of the antenna used in the product was extracted from the supplied antenna data sheet and the maximum total power input to the antenna was also measured. Calculate the distance from the product to the MPE limit by the formula. 2.2 LIMIT For single RF sources (i.e., any single fixed RF source, mobile device, or portable device, as defined in paragraph (b)(2) of this section): A single RF source is exempt if: (A) The available maximum time-averaged power is no more than 1 mW, regardless of separation distance. This exemption may not be used in conjunction with other exemption criteria other than those in paragraph (b)(3)(ii)(A) of Part 1.1307. Medical implant devices may only use this exemption and that in paragraph (b)(3)(ii)(A); (B) Or the available maximum time-averaged power or effective radiated power (ERP), whichever is greater, is less than or equal to the threshold Pth (mW) described in the following formula. This method shall only be used at separation distances (cm) from 0.5 centimeters to 40 centimeters and at frequencies from 0.3 GHz to 6 GHz (inclusive). Pth is given by: Page 7 of 9 Report No.: STS2303056H02 (C) Or using below table and the minimum separation distance (R in meters) from the body of a nearby person for the frequency (f in MHz) at which the source operates, the ERP (watts) is no more than the calculated value prescribed for that frequency. For the exemption in Table 1 to apply, R must be at least λ/2π, where λ is the free-space operating wavelength in meters. If the ERP of a single RF source is not easily obtained, then the available maximum time-averaged power may be used in lieu of ERP if the physical dimensions of the radiating structure(s) do not exceed the electrical length of λ/4 or if the antenna gain is less than that of a half-wave dipole (1.64 linear value). RF Source frequency (MHz) Threshold ERP(watts) 0.3-1.34 1,920 R 2 . 1.34-30 3,450 R 2 /f 2 . 30-300 3.83 R 2 . 300-1,500 0.0128 R 2 f. 1,500-100,000 19.2R 2 . Page 8 of 9 Report No.: STS2303056H02 For multiple RF sources: Multiple RF sources are exempt if: (A) The available maximum time-averaged power of each source is no mo…
Text truncated - open the document above for the full version.
Any reproduction of this document must be done in full. No single part of this document may be reproduced without permission from STS, all test data presented in this report is only applicable to presented test sample. Shenzhen STS Test Services Co., Ltd. A 1/F, Building B, Zhuoke Science Park, No.190 Chongqing Road, HepingShequ, Fuyong Sub-District, Bao’an District, Shenzhen, Guang Dong, China TEL: +86-755 3688 6288 FAX: +86-755 3688 6277 E-mail:[email protected] RADIO TEST REPORT Report No.: STS2303056W03 Issued for Shenzhen See Me Here Electronic Co.,Ltd 1st Floor,2nd Floor,3rd Floor,5th Floor,Building B,TongFuYu Industrial Park,No.32 Hangkong Road,Sanwei Community,Hangcheng Street,Bao'an district,Shenzhen,China Product Name: Wireless Speaker Brand: MIFA Model Number: TANGO Series Model(s): N/A FCC ID: 2AXOX-TANGO Test Standard: FCC Part 15.247 S T L A B S Page 2 of 100 Report No.: STS2303056W03 TEST RESULT CERTIFICATION Applicant’s Name ................... : Shenzhen See Me Here Electronic Co.,Ltd Address .................................. : 1st Floor,2nd Floor,3rd Floor,5th Floor,Building B,TongFuYu Industrial Park,No.32 Hangkong Road,Sanwei Community,Hangcheng Street,Bao'an district,Shenzhen,China Manufacturer's Name ............. : MIFA INNOVATIONS LLC Address .................................. : Castle County 10 Cheswold Blvd,#1D,New Newark DE,Delaware 19713 US Product Description Product Name ........................ : Wireless Speaker Brand ..................................... : MIFA Model Number ........................ : TANGO Series Model(s) ...................... : N/A Test Standards...................... : FCC Part15.247 Test Procedure ....................... : ANSI C63.10-2013 This device described above has been tested by STS, the test results show that the equipment under test (EUT) is in compliance with the FCC requirements. And it is applicable only to the tested sample identified in the report. This report shall not be reproduced except in full, without the written approval of STS, this document may be altered or revised by STS, personal only, and shall be noted in the revision of the document. Date of Test ............................... : Date of receipt of test item ......... : 16 Mar. 2023 Date (s) of performance of tests : 16 Mar. 2023 ~ 23 Mar. 2023 Date of Issue ............................. : 23 Mar. 2023 Test Result ................................. : Pass Testing Engineer : (Chris Chen) Technical Manager : (Sean she) Authorized Signatory : (Bovey Yang) Page 3 of 100 Report No.: STS2303056W03 Table of Contents Page 1. SUMMARY OF TEST RESULTS 6 1.1 TEST FACTORY 7 1.2 MEASUREMENT UNCERTAINTY 7 2. GENERAL INFORMATION 8 2.1 GENERAL DESCRIPTION OF THE EUT 8 2.2 DESCRIPTION OF THE TEST MODES 10 2.3 FREQUENCY HOPPING SYSTEM REQUIREMENTS 10 2.4 TABLE OF PARAMETERS OF TEST SOFTWARE SETTING 12 2.5 BLOCK DIAGRAM SHOWING THE CONFIGURATION OF SYSTEM TESTED 12 2.6 DESCRIPTION OF NECESSARY ACCESSORIES AND SUPPORT UNITS 13 2.7 EQUIPMENTS LIST 14 3. EMC EMISSION TEST 15 3.1 CONDUCTED EMISSION MEASUREMENT 15 3.2 RADIATED EMISSION MEASUREMENT 19 4. CONDUCTED SPURIOUS & BAND EDGE EMISSION 31 4.1 LIMIT 31 4.2 TEST PROCEDURE 31 4.3 TEST SETUP 32 4.4 EUT OPERATION CONDITIONS 32 4.5 TEST RESULTS 32 5. NUMBER OF HOPPING CHANNEL 33 5.1 LIMIT 33 5.2 TEST PROCEDURE 33 5.3 TEST SETUP 33 5.4 EUT OPERATION CONDITIONS 33 5.5 TEST RESULTS 33 6. AVERAGE TIME OF OCCUPANCY 34 6.1 LIMIT 34 6.2 TEST PROCEDURE 34 6.3 TEST SETUP 34 6.4 EUT OPERATION CONDITIONS 34 6.5 TEST RESULTS 34 7. HOPPING CHANNEL SEPARATION MEASUREMEN 35 Page 4 of 100 Report No.: STS2303056W03 Table of Contents Page 7.1 LIMIT 35 7.2 TEST PROCEDURE 35 7.3 TEST SETUP 35 7.4 EUT OPERATION CONDITIONS 35 7.5 TEST RESULTS 35 8. BANDWIDTH TEST 36 8.1 LIMIT 36 8.2 TEST PROCEDURE 36 8.3 TEST SETUP 36 8.4 EUT OPERATION CONDITIONS 36 8.5 TEST RESULTS 36 9. OUTPUT POWER TEST 37 9.1 LIMIT 37 9.2 TEST PROCEDURE 37 9.3 TEST SETUP 37 9.4 EUT OPERATION CONDITIONS 37 9.5 TEST RESULTS 37 10. ANTENNA REQUIREMENT 38 10.1 STANDARD REQUIREMENT 38 10.2 EUT ANTENNA 38 APPENDIX 1-TEST DATA 39 1. DWELL TIME 39 2. MAXIMUM AVERAGE CONDUCTED OUTPUT POWER 49 3. MAXIMUM PEAK CONDUCTED OUTPUT POWER 55 4. -20DB BANDWIDTH 61 5. CARRIER FREQUENCIES SEPARATION 67 6. NUMBER OF HOPPING CHANNEL 73 7. BAND EDGE 76 8. BAND EDGE(HOPPING) 83 9. CONDUCTED RF SPURIOUS EMISSION 90 APPENDIX 2-PHOTOS OF TEST SETUP 100 Page 5 of 100 Report No.: STS2303056W03 Revision History Rev. Issue Date Report NO. Effect Page Contents 00 23 Mar. 2023 STS2303056W03 ALL Initial Issue Page 6 of 100 Report No.: STS2303056W03 1. SUMMARY OF TEST RESULTS Test procedures according to the technical standards: KDB 558074 D01 15.247 Meas Guidance v05r02. FCC Part 15.247,Subpart C Standard Section Test Item Judgment Remark 15.207 Conducted Emission PASS -- 15.247(a)(1) Hopping Channel Separation PASS -- 15.247(a)(1)&(b)(1) Output Power PASS -- 15.209 Radiated Spurious Emission PASS -- 15.247(d) Conducted Spurious & Band Edge Emission PASS -- 15.247(a)(1)(iii) Number of Hopping Frequency PASS -- 15.247(a)(1)(iii) Dwell Time PASS -- 15.247(a)(1) Bandwidth PASS -- 15.205 Restricted bands of operation PASS -- Part 15.247(d)/part 15.209(a) Band Edge Emission PASS -- 15.203 Antenna Requirement PASS -- NOTE: (1) ‘N/A’ denotes test is not applicable in this Test Report. (2) All tests are according to ANSI C63.10-2013. Page 7 of 100 Report No.: STS2303056W03 1.1 TEST FACTORY SHENZHEN STS TEST SERVICES CO., LTD Add. : A 1/F, Building B, Zhuoke Science Park, No.190 Chongqing Road, HepingShequ, Fuyong Sub-District, Bao’an District, Shenzhen, Guang Dong, China FCC test Firm Registration Number: 625569 IC test Firm Registration Number: 12108A A2LA Certificate No.: 4338.01 1.2 MEASUREMENT UNCERTAINTY The reported uncertainty of measurement y ±U, where expended uncertainty U is based on a standard uncertainty multiplied by a coverage factor of k=2, providing a level of confidence of approximately 95 %. No. Item Uncer…
Text truncated - open the document above for the full version.
Shenzhen Qianmu Communication Technology Co.,Ltd. 联系人:王志强 联系方式:13760153961 电话:0755-21633653 传真:0755-21633541 深圳市宝安区航城街道三围社区航空路华丰智谷-航城高科技产业园A座4层425、443号 Antenna Acknowledgement Applicable model S211 Customer Shenzhen Minmei Busan Electronic Technology Co., Ltd. Specification description Product content Specification Customer material code Specification description WIFI antenna FPC/Black/Character QM-S211 + First generation terminal/black/φ 1.13 * 73mm 04.3.1.87.0113 Change of resume Serial number Date Version Brief description of the changes 1 2023-02-07 V1.0 New project 2 3 Supplier sample confirmation Research and development Structure Audit Judgement PASS FAIL Customer sample confirmation Electron Structure Project Procurement Quality Audit Reasons for rejection or other precautions: 1. Matching circuit-BT antenna 2. Antenna passive efficiency gain data Frequency ID 1 2 3 4 5 6 7 8 9 10 11 Frequency (MHz) 2400 2410 2420 2430 2440 2450 2460 2470 2480 2490 2500 Ant. Port Input Pwr. (dBm) 0 0 0 0 0 0 0 0 0 0 0 Tot. Rad. Pwr. (dBm) -4.98 -5.05 -4.93 -4.86 -4.92 -4.78 -4.88 -5.04 -4.9 -4.73 -4.65 Peak EIRP (dBm) 1.61 1.59 1.57 1.54 1.61 1.89 1.91 1.81 2.01 2.11 2.02 Directivity (dBi) 6.59 6.64 6.5 6.39 6.53 6.67 6.79 6.85 6.91 6.84 6.67 Efficiency (dB) -4.98 -5.05 -4.93 -4.86 -4.92 -4.78 -4.88 -5.04 -4.9 -4.73 -4.65 Efficiency (%) 31.8 31.3 32.1 32.7 32.2 33.3 32.5 31.3 32.4 33.6 34.3 Gain (dBi) 1.61 1.59 1.57 1.54 1.61 1.89 1.91 1.81 2.01 2.11 2.02 NHPRP ±Pi/4 (dBm) -6.07 -6.14 -6.01 -5.92 -5.96 -5.82 -5.91 -6.06 -5.88 -5.69 -5.6 NHPRP ±Pi/6 (dBm) -7.62 -7.69 -7.54 -7.41 -7.42 -7.26 -7.33 -7.46 -7.24 -7.01 -6.92 NHPRP ±Pi/8 (dBm) -8.93 -9.02 -8.86 -8.69 -8.66 -8.47 -8.52 -8.61 -8.34 -8.07 -7.96 Upper Hem. PRP (dBm) -6.64 -6.69 -6.57 -6.52 -6.59 -6.48 -6.6 -6.8 -6.71 -6.6 -6.53 Lower Hem. PRP (dBm) -9.96 -10.07 -9.95 -9.84 -9.86 -9.68 -9.73 -9.81 -9.56 -9.3 -9.19 Upper Hem. PRP (%) 21.68 21.43 22.01 22.29 21.92 22.49 21.9 20.87 21.31 21.87 22.26 Lower Hem. PRP (%) 10.09 9.84 10.12 10.38 10.32 10.77 10.65 10.44 11.05 11.75 12.04 3. 2.4G pattern 4. Antenna assembly instructions 5. Actual measurement of antenna ① The Android mobile phone is connected to the stereo (single), and the mobile phone plays songs without stuttering. The outdoor (roof/parking lot) test has a straight line distance of 50 meters without obstacles. ② The Android mobile phone is connected to the stereo (two stereos pull the distance), and the mobile phone plays songs without stuttering. The outdoor (roof/parking lot) test has a straight line distance of 50 meters without obstacles, 15 meters away from people. 6、Structural drawings
Page 1 of 2 FCC ID: 2AXOX-TANGO DSS&DTS Setup photo Model Number: TANGO DSS&DTS conduction DSS&DTS radiation L Page 2 of 2 FCC ID: 2AXOX-TANGO DSS&DTS radiation H
| # | Rule Parts | Frequency Range | Power Output |
|---|---|---|---|
| 1 | 15C | 2.40 GHz - 2.48 GHz | 1.90 mW |

Karaoke Speaker
Equipment Class
DSS - Part 15 Spread Spectrum Transmitter
Bluetooth Speaker
Equipment Class
DSS - Part 15 Spread Spectrum Transmitter
Wireless Speaker
Equipment Class
DTS - Digital Transmission System
Karaoke Speaker
Equipment Class
DSS - Part 15 Spread Spectrum Transmitter
Wireless Speaker
Equipment Class
DTS - Digital Transmission System