2AYGCTFY-LX1Smart Phone

Quick Start Guide TFY-LX1 TFY-LX2 TFY- LX3 Know Your Device Before using the device, familiarize yourself with its basic operations. •To power on your device, press and hold the power button until the screen turns on. •To power off your device, press and hold the power button, and then touch . •To restart your device, press and hold the power button, and then touch . •Press and hold the power button for 10 or more seconds to force restart your device. NFC Volume button Power button/Fingerprint sensor USB Type-C portHeadset jack Card slot •Only TFY-LX1 supports NFC. Please keep the NFC area close to other devices or objects while using the NFC function. •Check out the pre-installed Tips app and master all the great features on your device. 1 Getting Started •Be careful not to scratch your device or hurt yourself when using the eject pin. •Store the eject pin out of the reach of children to prevent accidental swallowing or injury. •Do not use cut or modified SIM cards with your device as these may not be recognized and could damage the card tray (slot). •If your SIM card does not match your device, please contact your carrier. Follow the instructions in the following figures to set up your device. Please use the eject pin included. Ensure that the card is correctly aligned and that the card tray is level when you insert it into your device. Single-SIM card: Dual-SIM card: SIM Card Management Select the default mobile data card and calling card as needed. For details, check out the pre-installed Tips app. 2 •4G service depends on the support of your network carrier and its deployment of relevant services. Please contact your carrier to activate 4G service. •4G service may be unavailable in certain areas due to network interference. •If this guide is inconsistent with the description on the official website, the latter prevails. For More Information If you encounter any problems while using your device, you can obtain help from the following resources: •Visit https://www.hihonor.com to view device information and other information. •Visit https://www.hihonor.com/global/support/ for the most up-to-date contact information for your country or region. •Go to Settings and enter the following keywords in the search box to view the corresponding information. E.g. Legal information, Safety information, Authentication info, Regulatory information. •Depending on the region or model, some devices are required to receive approval from the Federal Communications Commission (FCC). If your device is approved by the FCC, you can go to Settings and touch System & updates > Regulatory information to view FCC ID. If your device does not have an FCC ID, the device has not been authorized for sale in the U.S. or its territories and may only be brought to the U.S. for the owner's personal use. Safety Information Please read all of the safety information carefully before using your device to ensure its safe and proper operation and to learn how to dispose of your device properly. Operation and safety • To prevent possible hearing damage, do not listen at high volume levels for long periods. •Using an unapproved or incompatible power adapter, charger, or battery may damage your device, shorten its lifespan, or cause a fire, explosion, or other hazards. 3 •Ideal operating temperatures are 0 °C to 35 °C. Ideal storage temperatures are -20 °C to +45 °C. •Pacemaker manufacturers recommend that a minimum distance of 15 cm be maintained between a device and a pacemaker to prevent potential interference with the pacemaker. If using a pacemaker, hold the device on the side opposite the pacemaker and do not carry the device in your front pocket. •Keep the device and the battery away from excessive heat and direct sunlight. Do not place them on or in heating devices, such as microwave ovens, stoves, or radiators. •Observe local laws and regulations while using the device. To reduce the risk of accidents, do not use your wireless device while driving. •While flying in an aircraft or immediately before boarding, only use your device according to instructions provided. Use of a wireless device in an aircraft may disrupt wireless networks, present a hazard to aircraft operation, or be illegal. •In order to avoid damaging the internal circuit of the device or charger, do not use the device in a dusty, damp, or dirty place, or near a magnetic field. •When charging the device, make sure the power adapter is plugged into a socket near the devices and is easily accessible. •Unplug the charger from electrical outlets and the device when not in use. •Do not use, store or transport the device where flammables or explosives are stored (in a gas station, oil depot, or chemical plant, for example). Using your device in these environments increases the risk of explosion or fire. •Keep the battery away from fire, and do not disassemble, modify, throw, or squeeze it. Do not insert foreign objects into it, submerge it in water or other liquids, or expose it to external force or pressure, as this may cause the battery to leak, overheat, catch fire, or even explode. •Dispose of this device, the battery, and accessories according to local regulations. They should not be disposed of in normal household waste. Improper battery use may lead to fire, explosion, or other hazards. 4 •This device contains a built-in battery. Do not attempt to replace the battery by yourself. Otherwise, the device may not run properly or it may damage the battery. For your personal safety and to ensure that your device runs properly, you are strongly advised to contact an authorized service center for a replacement. Disposal and Recycling Information The symbol on the product, battery, literature, or packaging means that the products and batteries should be taken to separate waste collection points designated by local authorities at the end of the lifespan. This will ensure that EEE waste is recycled and treated in a manner that conserves valuable materials and protects…

Text truncated - open the document above for the full version.

20_Authorization Letter V1.0 Honor Device Co., Ltd. Federal Communications Commission 2022-02-22 Oakland Mills Road Columbia MD 21046 Letter of Authorization To whom it may concern: We the undersigned, hereby authorize TÜV Rheinland (Shenzhen) Co., Ltd. to act on our behalf in all manners relating to application for equipment authorization, including signing of all documents relating to these matters. Any and all acts carried out by TÜV Rheinland (Shenzhen) Co., Ltd. on our behalf shall have the same affect as acts of our own. I, the undersigned, hereby certify that we are not subject to a denial of federal benefits, that includes FCC benefits, pursuant to Section 5301 of the Anti-Drug Abuse Act of 1988, 21 U.S.C. 862. This authorization is valid until further written notice from Honor Device Co., Ltd. . Sincerely, For and Behalf of: Honor Device Co., Ltd. Liming Laboratory Manager Honor Device Co., Ltd. E-mail: [email protected] Tel: 0755-61886688 Fax: NA

Differences 2022-3-3 Page1, Total3 Honor Device Co., Ltd. Declaration of test data reuse Letter TFY-LX1（FCC ID: 2AYGCTFY-LX1）is a reference device based on TFY-LX3(FCC ID: 2AYGCTFY-LX3),the difference between them shows in the below table: Therefore the test plans confirmed as below EMC: TFY-LX1 uses the same frequency band data on the basis of TFY-LX3, and adds the worst mode of RE. New test NFC RF: For non-CA frequency bands, TFY-LX1 can use TFY-LX3 data; For NFC, TFY-LX1 new test; RSE:TFY-LX1 uses the same frequency band data on the basis of TFY-LX3, adding the worst frequency band of each standard. SAR: TFY-LX1 uses TFY-LX3 data Re-measure the worst point of each exposure scenario for each antenna and each frequency band The difference between model TFY-LX3 and model TFY-LX1 is show in the below table: Model TFY-LX3 TFY-LX1 Licensed Frequency LTE BAND B2/4/5/7/13/26/38/66 Not support CA B5/B7 Support CA（downlink only） UMTS BAND B2/B4/B5 B2/B5 GSM B2/B5 B2/B5 Differences 2022-3-3 Page2, Total3 IC the same the same Antenna The antenna matching and routing are the same. The frequency is different. The antenna matching and routing are the same. The frequency is different. Unlicensed Frequency NFC Not support Support，Add NFC functionality via hardware Bluetooth the same the same Wi-Fi the same the same GPS the same the same IC the same the same Antenna BT+Wi-Fi+GPS antenna BT+Wi-Fi+GPS Add NFC antenna Hardware Ram / Rom the same the same Camera the same the same PCB the same the same USB Port the same the same SIM the same the same Hardware Version the same the same Software Version the same the same RF RF circuit The RF circuit of the same frequency is the same. The RF circuit of the same frequency is the same. the different frequency changed by hardware and some RF parameters. Changes are followed: delete B4/B13/B38/B66 Differences 2022-3-3 Page3, Total3 SAWS、Diplexer、switch、 LNA and RF matching components. Appearance Dimension the same the same Color the same the same Accessory Battery the same the same Charger the same the same USB Cable the same the same Earphone the same the same

23_Electronic Label Letter V1.0 Honor Device Co., Ltd. Federal Communications Commission 2022-02-22 Oakland Mills Road Columbia MD 21046 Subject: Electronic Label Letter FCC ID: 2AYGCTFY-LX1. To Whom It May Concern: Pursuant to the provisions of KDB 784748 D02 e labeling v02, we hereby provide the following statement: This device have a integrated display screen can present the required label information electronically (e-label) in lieu of a physical label or nameplate. The end user can access the electronic label with three steps. The information of electronic label is programmed by Honor, any can’t be modified by any third party. If have any questions concerning the above, please contact the undersigned. Best Regards Name, Surname: Liming Position/Title:Certification Manager Honor Device Co., Ltd. Address: Suite 3401, Unit A, Building 6, Shum Yip Sky Park, No. 8089, Hongli West Road, Xiangmihu Street, Futian District, Shenzhen, Guangdong 518040, People's Republic of China E-mail: [email protected] Tel: 0755-61886688

TFY-LX1 Smart Phone 2022-2-22 HONOR Confidential Page1, Total4 External Photos of TFY-LX1 TFY-LX1 Smart Phone 2022-2-22 HONOR Confidential Page2, Total4 1. Front-TFY-LX1 2. Back-TFY-LX1 TFY-LX1 Smart Phone 2022-2-22 HONOR Confidential Page3, Total4 3. Right-TFY-LX1 4.Left-TFY-LX1 TFY-LX1 Smart Phone 2022-2-22 HONOR Confidential Page4, Total4 5.Top-TFY-LX1 6. Bottom-TFY-LX1

TFY-LX1 Smart Phone 2022-2-22 HONOR Confidential Page1, Total2 Label and label Location: FCC ID electronic label: Settings-->System & updates-->Regulatory information TFY-LX1 Smart Phone 2022-2-22 HONOR Confidential Page2, Total2

TFY-LX1 Smart Phone 2022-2-22 HONOR Confidential Page1, Total4 Internal Photos of TFY-LX1 TFY-LX1 Smart Phone 2022-2-22 HONOR Confidential Page2, Total4 TFY-LX1 Smart Phone 2022-2-22 HONOR Confidential Page3, Total4 TFY-LX1 Smart Phone 2022-2-22 HONOR Confidential Page4, Total4

SA TA Techno This report sh AR Test Report logy (Shangh hall not be repr t hai) Co., Ltd. roduced except tin full, without TA-MB-05-0 t the written ap 003S pproval of TA Te Repo echnology (Shan rt No.: R2201A Page nghai) Co., Ltd. A0039-S1V1 151 of 191 SA TA Techno This report sh AR Test Report logy (Shangh hall not be repr t hai) Co., Ltd. roduced except tin full, without TA-MB-05-0 t the written ap 003S pproval of TA Te Repo echnology (Shan rt No.: R2201A Page nghai) Co., Ltd. A0039-S1V1 152 of 191 SA TA Techno This report sh AR Test Report logy (Shangh hall not be repr t hai) Co., Ltd. roduced except tin full, without TA-MB-05-0 t the written ap 003S pproval of TA Te Repo echnology (Shan rt No.: R2201A Page nghai) Co., Ltd. A0039-S1V1 153 of 191 SA TA Techno This report sh AR Test Report logy (Shangh hall not be repr t hai) Co., Ltd. roduced except tin full, without TA-MB-05-0 t the written ap 003S pproval of TA Te Repo echnology (Shan rt No.: R2201A Page nghai) Co., Ltd. A0039-S1V1 154 of 191 SA TA Techno This report sh AR Test Report logy (Shangh hall not be repr t hai) Co., Ltd. roduced except tin full, without TA-MB-05-0 t the written ap 003S pproval of TA Te Repo echnology (Shan rt No.: R2201A Page nghai) Co., Ltd. A0039-S1V1 155 of 191 SA TA Techno This report sh AR Test Report logy (Shangh hall not be repr t hai) Co., Ltd. roduced except tin full, without TA-MB-05-0 t the written ap 003S pproval of TA Te Repo echnology (Shan rt No.: R2201A Page nghai) Co., Ltd. A0039-S1V1 156 of 191 SA TA Techno This report sh AR Test Report logy (Shangh hall not be repr t hai) Co., Ltd. roduced except tin full, without TA-MB-05-0 t the written ap 003S pproval of TA Te Repo echnology (Shan rt No.: R2201A Page nghai) Co., Ltd. A0039-S1V1 157 of 191 SA TA Techno This report sh ANNEX AR Test Report logy (Shangh hall not be repr X G: D245 t hai) Co., Ltd. roduced except 50V2 Dip tin full, without pole Cali TA-MB-05-0 t the written ap bration C 003S pproval of TA Te Certifica Repo echnology (Shan te rt No.: R2201A Page nghai) Co., Ltd. A0039-S1V1 158 of 191 SA TA Techno This report sh AR Test Report logy (Shangh hall not be repr t hai) Co., Ltd. roduced except tin full, without TA-MB-05-0 t the written ap 003S pproval of TA Te Repo echnology (Shan rt No.: R2201A Page nghai) Co., Ltd. A0039-S1V1 159 of 191 SA TA Techno This report sh AR Test Report logy (Shangh hall not be repr t hai) Co., Ltd. roduced except tin full, without TA-MB-05-0 t the written ap 003S pproval of TA Te Repo echnology (Shan rt No.: R2201A Page nghai) Co., Ltd. A0039-S1V1 160 of 191 SA TA Techno This report sh AR Test Report logy (Shangh hall not be repr t hai) Co., Ltd. roduced except tin full, without TA-MB-05-0 t the written ap 003S pproval of TA Te Repo echnology (Shan rt No.: R2201A Page nghai) Co., Ltd. A0039-S1V1 161 of 191 SA TA Techno This report sh AR Test Report logy (Shangh hall not be repr t hai) Co., Ltd. roduced except tin full, without TA-MB-05-0 t the written ap 003S pproval of TA Te Repo echnology (Shan rt No.: R2201A Page nghai) Co., Ltd. A0039-S1V1 162 of 191 SA TA Techno This report sh AR Test Report logy (Shangh hall not be repr t hai) Co., Ltd. roduced except tin full, without TA-MB-05-0 t the written ap 003S pproval of TA Te Repo echnology (Shan rt No.: R2201A Page nghai) Co., Ltd. A0039-S1V1 163 of 191 SA TA Techno This report sh AR Test Report logy (Shangh hall not be repr t hai) Co., Ltd. roduced except tin full, without TA-MB-05-0 t the written ap 003S pproval of TA Te Repo echnology (Shan rt No.: R2201A Page nghai) Co., Ltd. A0039-S1V1 164 of 191 SA TA Techno This report sh AR Test Report logy (Shangh hall not be repr t hai) Co., Ltd. roduced except tin full, without TA-MB-05-0 t the written ap 003S pproval of TA Te Repo echnology (Shan rt No.: R2201A Page nghai) Co., Ltd. A0039-S1V1 165 of 191 SA TA Techno This report sh ANNEX AR Test Report logy (Shangh hall not be repr X H: D260 t hai) Co., Ltd. roduced except 00V2 Dip tin full, without pole Cali TA-MB-05-0 t the written ap bration C 003S pproval of TA Te Certificat Repo echnology (Shan te rt No.: R2201A Page nghai) Co., Ltd. A0039-S1V1 166 of 191 SA TA Techno This report sh AR Test Report logy (Shangh hall not be repr t hai) Co., Ltd. roduced except tin full, without TA-MB-05-0 t the written ap 003S pproval of TA Te Repo echnology (Shan rt No.: R2201A Page nghai) Co., Ltd. A0039-S1V1 167 of 191 SA TA Techno This report sh AR Test Report logy (Shangh hall not be repr t hai) Co., Ltd. roduced except tin full, without TA-MB-05-0 t the written ap 003S pproval of TA Te Repo echnology (Shan rt No.: R2201A Page nghai) Co., Ltd. A0039-S1V1 168 of 191 SA TA Techno This report sh AR Test Report logy (Shangh hall not be repr t hai) Co., Ltd. roduced except tin full, without TA-MB-05-0 t the written ap 003S pproval of TA Te Repo echnology (Shan rt No.: R2201A Page nghai) Co., Ltd. A0039-S1V1 169 of 191 SA TA Techno This report sh AR Test Report logy (Shangh hall not be repr t hai) Co., Ltd. roduced except tin full, without TA-MB-05-0 t the written ap 003S pproval of TA Te Repo echnology (Shan rt No.: R2201A Page nghai) Co., Ltd. A0039-S1V1 170 of 191 SA TA Techno This report sh AR Test Report logy (Shangh hall not be repr t hai) Co., Ltd. roduced except tin full, without TA-MB-05-0 t the written ap 003S pproval of TA Te Repo echnology (Shan rt No.: R2201A Page nghai) Co., Ltd. A0039-S1V1 171 of 191 SA TA Techno This report sh ANNEX AR Test Report logy (Shangh hall not be repr X I: D5GH t hai) Co., Ltd. roduced except HzV2 Dip tin full, without pole Calib TA-MB-05-0 t the written ap bration C 003S pproval of TA Te Certificat Repo echnology (Shan te rt No.: R2201A Page nghai) Co., Ltd. A0039-S1V1 172 of 191 SA TA Techno This report sh AR Test Report logy (Shangh hall not be repr t hai) Co., Ltd. roduced except tin full, without TA-MB-05-0 t the written ap 003S pproval of TA Te Repo echnology (Shan rt No.: R2201A Page nghai) Co., Ltd. A0039-S1V1 173 of 191 SA T…

Text truncated - open the document above for the full version.

TA Techno 1528- 2013 of demonst P TA T N ology (Shangh 3, ANSI C95. trating compl Prepared by: F Techn No.145, Jintan SA Applic FCC ID Produ Model Repo r Issue hai) Co., Ltd. 1: 1992, IEE E iance with the Fangying Wei ology g Rd, Tangzhe TEL: +8 FAX: +86- 0 AR TE cant H D 2 ct S T rt No. R Date M tested the ab E C95.1: 199 e requiremen i App r y (Shan en Industry Pa 6-021-507911 021-50791141 EST R Honor De 2AYGCT Smart Ph TFY-LX1 R2201A0 March 2, bove equipme 91. The test re nts as docume roved by: Gua nghai) ark, Pudong Sh 141/2/3 1/2/3-8000 REPO evice Co. FY-LX1 hone 0039-S1V 2022 ent in accorda esults show th ented in this r angchang Fa ) Co., L hanghai, Chin RT , Ltd. V1 ance with the hat the equip report. n Ltd. na e requirement ment tested i ts in IEEE s capable SA TA Techno This report sh 1 Test L 1.1 N 1.2 T 1.3 T 1.4 L 2 State 3 Desc 4 Test S 5 Opera 5.1 T 5 5 5 5.2 M 5.3 T 5 5 5 5 5 5 5 5 6 SAR 6.1 S 6.2 D 6.3 S 7 Main 8 Tissu 8.1 T 8.2 S 8.3 S 9 Norm 9.1 G 9.2 W 9.3 L 9.4 W 9.5 B 10 Meas 10.1 E 10.2 S AR Test Report logy (Shangh hall not be repr Laboratory .. Notes of the Test facility . Testing Loca Laboratory E ement of Com ription of Eq Specification ational Cond Test Position 5.1.1 Aga 5.1.2 Bod 5.1.3 Pha Measuremen Test Configu 5.3.1 GS 5.3.2 UM 5.3.3 LTE 5.3.4 Add 5.3.5 Wi- 5.3.6 BT 5.3.7 Pow 5.3.8 Cou Measureme SAR Measur DASY5 E-fie SAR Measur Test Equipm e Dielectric Tissue Verifi System Perf SAR System mal and Maxi GSM Mode . WCDMA Mo LTE Mode ... WLAN Mode Bluetooth Mo sured and R EUT Antenn Standalone S t hai) Co., Ltd. roduced except .................. Test Repo r .................. ation ........... Environment mpliance .... quipment un n, Methods a ditions durin ns ............... ainst Phanto dy Worn Co ablet SAR te nt Variability uration ........ M Test Con MTS Test Co E Test Confi ditional requ -Fi Test Con Test Config wer reduced untry code d ents System rement Set- eld Probe Sy rement Proc ment ........... Parameter ication ........ formance Ch m Validation imum Outpu .................. ode ............. .................. e ................. ode ............ eported (S c a Locations SAR test ex tin full, without Table ................... rt ................. ................... ................... t .................. ................... der Test ...... and Procedu ng Test ........ ................... om Head ..... nfiguration .. est consider y .................. ................... nfiguration ... onfiguration . iguration ..... uirements fo nfiguration ... guration ....... d detection m detection me Configurati up ............. . ystem .......... cedure ........ ................... Measureme ................... heck ............ ................... ut Power ..... ................... ................... ................... ................... ................... caled) SAR R .................. xclusion cons TA-MB-05-0 t the written ap e of Con ................... ................... ................... ................... ................... ................... ................... ures ........... ................... ................... .................... .................... rations ......... ................... ................... .................... .................... .................... r TDD LTE s .................... .................... mechanism s echanism .... on .............. ................... ................... ................... ................... ents & Syste ................... ................... ................... ................... ................... ................... ................... ................... ................... Results ....... ................... siderations . 003S pproval of TA Te tents .................. .................. .................. .................. .................. .................. .................. .................. .................. .................. .................... . ..................... ..................... .................. .................. .................... . ..................... ..................... specification ..................... ..................... specification ..................... .................. .................. .................. .................. .................. em Verificatio .................. .................. .................. .................. .................. .................. .................. .................. .................. .................. .................. .................. Repo echnology (Shan .................. .................. .................. .................. .................. .................. .................. .................. .................. .................. ..................... ..................... ..................... .................. .................. ..................... ..................... ..................... n ................... ..................... ..................... n ................... ..................... .................. .................. .................. .................. .................. on .............. .................. .................. .................. .................. .................. .................. .................. .................. .................. .................. .................. .................. rt No.: R2201A Page 2 nghai) Co., Ltd. ................... ................... ................... ................... ................... ................... ................... ................... ................... ................... .................... .................... .................... .................. . ................... .................... .................... .................... .................... .................... .................... .................... .................... .................. . ................... ................... ................... ................... ................... .....…

Text truncated - open the document above for the full version.

Prepared by: Peng Tao Approved by: Kai Xu TA Technology (Shanghai) Co., Ltd. No.145, Jintang Rd, Tangzhen Industry Park, Pudong Shanghai, China TEL: +86-021-50791141/2/3 FAX: +86-021-50791141/2/3-8000 RF TEST REPORT Applicant Honor Device Co., Ltd. FCC ID 2AYGCTFY-LX1 Product Smart Phone Model TFY-LX1 Report No. R2201A0039-R1V1 Issue Date March 2, 2022 TA Technology (Shanghai) Co., Ltd. tested the above equipment in accordance with the requirements in FCC CFR47 Part 2 (2020)/ FCC CFR 47 Part 22H (2020). The test results show that the equipment tested is capable of demonstrating compliance with the requirements as documented in this report. RF Test Report Report No.: R2201A0039-R1V1 TA Technology (Shanghai) Co., Ltd. TA-MB-05-001R Page 2 of 65 This report shall not be reproduced except in full, without the written approval of TA Technology (Shanghai) Co., Ltd. TABLE OF CONTENT 1. Test Laboratory ...................................................................................................................................... 5 1.1. Notes of the Test Report ............................................................................................................... 5 1.2. Test facility ..................................................................................................................................... 5 1.3. Testing Location ............................................................................................................................ 5 2. General Description of Equipment under Test ....................................................................................... 6 2.1. Applicant and Manufacturer Information ....................................................................................... 6 2.2. General Information ....................................................................................................................... 6 3. Applied Standards .................................................................................................................................. 8 4. Test Configuration .................................................................................................................................. 9 5. Test Case Results ................................................................................................................................ 11 5.1. RF Power Output and Effective Radiated Power ........................................................................ 11 5.2. Occupied Bandwidth ................................................................................................................... 16 5.3. Band Edge Compliance ............................................................................................................... 34 5.4. Peak-to-Average Power Ratio (PAPR) ....................................................................................... 45 5.5. Frequency Stability ...................................................................................................................... 48 5.6. Spurious Emissions at Antenna Terminals ................................................................................. 51 5.7. Radiates Spurious Emission ....................................................................................................... 56 6. Main Test Instruments ......................................................................................................................... 62 ANNEX A: The EUT Appearance ................................................................................................................ 63 ANNEX B: Test Setup Photos ..................................................................................................................... 64 ANNEX C: Product Change Description ..................................................................................................... 65 RF Test Report Report No.: R2201A0039-R1V1 TA Technology (Shanghai) Co., Ltd. TA-MB-05-001R Page 3 of 65 This report shall not be reproduced except in full, without the written approval of TA Technology (Shanghai) Co., Ltd. Version Revision description Issue Date Rev.0 Initial issue of report. February 11, 2022 Rev.1 Update data and description. March 2, 2022 Note: This revised report (Report No. R2201A0039-R1V1) supersedes and replaces the previously issued report (Report No. R2201A0039-R1). Please discard or destroy the previously issued report and dispose of it accordingly. RF Test Report Report No.: R2201A0039-R1V1 TA Technology (Shanghai) Co., Ltd. TA-MB-05-001R Page 4 of 65 This report shall not be reproduced except in full, without the written approval of TA Technology (Shanghai) Co., Ltd. Summary of measurement results No. Test Case Clause in FCC rules Verdict 1 RF Power Output and Effective Radiated Power 2.1046 / 22.913(a)(5) PASS 2 Occupied Bandwidth 2.1049 PASS 3 Band Edge Compliance 2.1051 / 22.917(a) PASS 4 Peak-to-Average Power Ratio 22.913(d)/KDB 971168 D01(5.7) PASS 5 Frequency Stability 2.1055 / 22.355 PASS 6 Spurious Emissions at Antenna Terminals 2.1051 / 22.917(a) PASS 7 Radiates Spurious Emission 2.1053 / 22.917 (a) PASS Date of Testing: January 13, 2022 ~ January 27, 2022 and February 28, 2022 ~ March 1, 2022 Date of Sample Received: January 10, 2022 Note: PASS: The EUT complies with the essential requirements in the standard. FAIL: The EUT does not comply with the essential requirements in the standard. All indications of Pass/Fail in this report are opinions expressed by TA Technology (Shanghai) Co., Ltd. based on interpretations and/or observations of test results. Measurement Uncertainties were not taken into account and are published for informational purposes only. TFY-LX1 (Report No.: R2201A0039-R1V1) is a variant model of TFY-LX3 (Report No.: R2201A0036-R1V1). Test values partial duplicated from Original for variant. There is no test for variant in this report. The difference between model TFY-LX3 and model TFY-LX1 is sh…

Text truncated - open the document above for the full version.

Prepared by: Peng Tao Approved by: Kai Xu TA Technology (Shanghai) Co., Ltd. No.145, Jintang Rd, Tangzhen Industry Park, Pudong Shanghai, China TEL: +86-021-50791141/2/3 FAX: +86-021-50791141/2/3-8000 RF TEST REPORT Applicant Honor Device Co., Ltd. FCC ID 2AYGCTFY-LX1 Product Smart Phone Model TFY-LX1 Report No. R2201A0039-R2V1 Issue Date March 2, 2022 TA Technology (Shanghai) Co., Ltd. tested the above equipment in accordance with the requirements in FCC CFR47 Part 2 (2020)/ FCC CFR 47 Part 24E (2020). The test results show that the equipment tested is capable of demonstrating compliance with the requirements as documented in this report. RF Test Report Report No.: R2201A0039-R2V1 TA Technology (Shanghai) Co., Ltd. TA-MB-05-002R Page 2 of 35 This report shall not be reproduced except in full, without the written approval of TA Technology (Shanghai) Co., Ltd. TABLE OF CONTENT 1. Test Laboratory ..............................................................................…

Text truncated - open the document above for the full version.