2AYGCTFY-LX2Smart Phone

Quick Start Guide TFY-LX1 TFY-LX2 TFY- LX3 Know Your Device Before using the device, familiarize yourself with its basic operations. •To power on your device, press and hold the power button until the screen turns on. •To power off your device, press and hold the power button, and then touch . •To restart your device, press and hold the power button, and then touch . •Press and hold the power button for 10 or more seconds to force restart your device. NFC Volume button Power button/Fingerprint sensor USB Type-C portHeadset jack Card slot •Only TFY-LX1 supports NFC. Please keep the NFC area close to other devices or objects while using the NFC function. •Check out the pre-installed Tips app and master all the great features on your device. 1 Getting Started •Be careful not to scratch your device or hurt yourself when using the eject pin. •Store the eject pin out of the reach of children to prevent accidental swallowing or injury. •Do not use cut or modified SIM cards with your device as these may not be recognized and could damage the card tray (slot). •If your SIM card does not match your device, please contact your carrier. Follow the instructions in the following figures to set up your device. Please use the eject pin included. Ensure that the card is correctly aligned and that the card tray is level when you insert it into your device. Single-SIM card: Dual-SIM card: SIM Card Management Select the default mobile data card and calling card as needed. For details, check out the pre-installed Tips app. 2 •4G service depends on the support of your network carrier and its deployment of relevant services. Please contact your carrier to activate 4G service. •4G service may be unavailable in certain areas due to network interference. •If this guide is inconsistent with the description on the official website, the latter prevails. For More Information If you encounter any problems while using your device, you can obtain help from the following resources: •Visit https://www.hihonor.com to view device information and other information. •Visit https://www.hihonor.com/global/support/ for the most up-to-date contact information for your country or region. •Go to Settings and enter the following keywords in the search box to view the corresponding information. E.g. Legal information, Safety information, Authentication info, Regulatory information. •Depending on the region or model, some devices are required to receive approval from the Federal Communications Commission (FCC). If your device is approved by the FCC, you can go to Settings and touch System & updates > Regulatory information to view FCC ID. If your device does not have an FCC ID, the device has not been authorized for sale in the U.S. or its territories and may only be brought to the U.S. for the owner's personal use. Safety Information Please read all of the safety information carefully before using your device to ensure its safe and proper operation and to learn how to dispose of your device properly. Operation and safety • To prevent possible hearing damage, do not listen at high volume levels for long periods. •Using an unapproved or incompatible power adapter, charger, or battery may damage your device, shorten its lifespan, or cause a fire, explosion, or other hazards. 3 •Ideal operating temperatures are 0 °C to 35 °C. Ideal storage temperatures are -20 °C to +45 °C. •Pacemaker manufacturers recommend that a minimum distance of 15 cm be maintained between a device and a pacemaker to prevent potential interference with the pacemaker. If using a pacemaker, hold the device on the side opposite the pacemaker and do not carry the device in your front pocket. •Keep the device and the battery away from excessive heat and direct sunlight. Do not place them on or in heating devices, such as microwave ovens, stoves, or radiators. •Observe local laws and regulations while using the device. To reduce the risk of accidents, do not use your wireless device while driving. •While flying in an aircraft or immediately before boarding, only use your device according to instructions provided. Use of a wireless device in an aircraft may disrupt wireless networks, present a hazard to aircraft operation, or be illegal. •In order to avoid damaging the internal circuit of the device or charger, do not use the device in a dusty, damp, or dirty place, or near a magnetic field. •When charging the device, make sure the power adapter is plugged into a socket near the devices and is easily accessible. •Unplug the charger from electrical outlets and the device when not in use. •Do not use, store or transport the device where flammables or explosives are stored (in a gas station, oil depot, or chemical plant, for example). Using your device in these environments increases the risk of explosion or fire. •Keep the battery away from fire, and do not disassemble, modify, throw, or squeeze it. Do not insert foreign objects into it, submerge it in water or other liquids, or expose it to external force or pressure, as this may cause the battery to leak, overheat, catch fire, or even explode. •Dispose of this device, the battery, and accessories according to local regulations. They should not be disposed of in normal household waste. Improper battery use may lead to fire, explosion, or other hazards. 4 •This device contains a built-in battery. Do not attempt to replace the battery by yourself. Otherwise, the device may not run properly or it may damage the battery. For your personal safety and to ensure that your device runs properly, you are strongly advised to contact an authorized service center for a replacement. Disposal and Recycling Information The symbol on the product, battery, literature, or packaging means that the products and batteries should be taken to separate waste collection points designated by local authorities at the end of the lifespan. This will ensure that EEE waste is recycled and treated in a manner that conserves valuable materials and protects…

Text truncated - open the document above for the full version.

20_Authorization Letter V1.0 Honor Device Co., Ltd. Federal Communications Commission 2022-02-21 Oakland Mills Road Columbia MD 21046 Letter of Authorization To whom it may concern: We the undersigned, hereby authorize TÜV Rheinland (Shenzhen) Co., Ltd.to act on our behalf in all manners relating to application for equipment authorization, including signing of all documents relating to these matters. Any and all acts carried out by TÜV Rheinland (Shenzhen) Co., Ltd.on our behalf shall have the same affect as acts of our own. I, the undersigned, hereby certify that we are not subject to a denial of federal benefits, that includes FCC benefits, pursuant to Section 5301 of the Anti-Drug Abuse Act of 1988, 21 U.S.C. 862. This authorization is valid until further written notice from Honor Device Co., Ltd. . Sincerely, For and Behalf of: Honor Device Co., Ltd. Liming Certification Manager r Honor Device Co., Ltd. E-mail: [email protected] Tel: 0755-61886688 Fax: NA

18_Confidentiality Letter V1.0 Honor Device Co., Ltd. Federal Communications Commission 2022-02-21 Oakland Mills Road Columbia MD 21046 Subject: Request for Confidentiality FCC ID: 2AYGCTFY-LX2 To Whom It May Concern: Pursuant to the provisions of Sections 0.457 and 0.459 of the Commission’s rules (47 CFR §§ 0.457, 0.459), we are requesting the Commission to withhold the following attachments as confidential document from public disclosure indefinitely. Schematic Diagram Block Diagram Operational Description Bom List Tune-Up Procedure Above mentioned document contains detailed system and equipment description are considered as proprietary information in operation of the equipment. The public disclosure of above documents might be harmful to our company and would give competitor an unfair advantage in the market. ***************************************************************************** In additional to above mentioned documents, pursuant to Public Notice DA 04-1705 of the Commission’s policy, in order to comply with the marketing regulations in 47 CFR §2.803 and the importation rules in 47 CFR §2.1204, while ensuring that business sensitive information remains confidential until the actual marketing of newly authorized devices. We are requesting the Commission withholds the following documents from public viewing until 2022-08-07 External Photos Internal Photos Test Setup Photos User Manual ****************************************************************************** It is our understanding that all measurement test reports, FCC ID label format and correspondent during certification review process cannot be granted as confidential documents and those information will be available for public review once the grant of equipment authorization is issued. Best Regards 18_Confidentiality Letter V1.0 Liming Laboratory Manager Honor Device Co., Ltd. E-mail: [email protected] Tel: 0755-61886688 Fax: NA

Differences 2022-2-28 Page1, Total3 Honor Device Co., Ltd. Declaration of test data reuse Letter TFY-LX2（FCC ID: 2AYGCTFY-LX2）is a reference device based on TFY-LX3(FCC ID: 2AYGCTFY-LX3),the difference between them shows in the below table: Therefore the test plans confirmed as below EMC: TFY-LX2 uses the same frequency band data on the basis of TFY-LX3, and adds the worst mode of RE. RF: TFY-LX2 uses the same frequency band data on the basis of TFY-LX3; RSE:TFY-LX2 uses the same frequency band data on the basis of TFY-LX3, and newly tests LTE B41, adding the worst frequency band of each standard. SAR: TFY-LX2 uses TFY-LX3 data Re-measure the worst point of each exposure scenario for each antenna and each frequency band and newly tests LTE B41 The difference between model TFY-LX3 and model TFY-LX2 is show in the below table: Model TFY-LX3 TFY-LX2 Licensed Frequency LTE BAND B2/B4/B5/B7/B13/B26/B 38/B66 B5/B7/B38/B41 UMTS BAND B2/B4/B5 B2/B5 GSM B2/B5 B2/B5 IC the same the same Antenna The antenna matching and routing are the The antenna matching and routing are the Differences 2022-2-28 Page2, Total3 same. The frequency is different. same. The frequency is different. Unlicensed Frequency NFC Not support Not support Bluetooth the same the same Wi-Fi the same the same GPS the same the same IC the same the same Antenna the same the same Hardware Ram / Rom the same the same Camera the same the same PCB the same the same USB Port the same the same SIM the same the same Hardware Version the same the same Software Version the same the same RF RF circuit The RF circuit of the same frequency is the same. The RF circuit of the same frequency is the same. the different frequency changed by hardware and some RF parameters. Changes are followed: delete B4/B13/B66 SAWS、Diplexer、switch and RF matching components. Appearance Dimension the same the same Color the same the same Differences 2022-2-28 Page3, Total3 Accessory Battery the same the same Charger the same the same USB Cable the same the same Earphone the same the same

23_Electronic Label Letter V1.0 Honor Device Co., Ltd. Federal Communications Commission 2022-02-22 Oakland Mills Road Columbia MD 21046 Subject: Electronic Label Letter FCC ID: 2AYGCTFY-LX2. To Whom It May Concern: Pursuant to the provisions of KDB 784748 D02 e labeling v02, we hereby provide the following statement: This device have a integrated display screen can present the required label information electronically (e-label) in lieu of a physical label or nameplate. The end user can access the electronic label with three steps. The information of electronic label is programmed by Honor, any can’t be modified by any third party. If have any questions concerning the above, please contact the undersigned. Best Regards Name, Surname: Liming Position/Title:Certification Manager Honor Device Co., Ltd. Address: Suite 3401, Unit A, Building 6, Shum Yip Sky Park, No. 8089, Hongli West Road, Xiangmihu Street, Futian District, Shenzhen, Guangdong 518040, People's Republic of China E-mail: [email protected] Tel: 0755-61886688

TFY-LX2 Smart Phone 2022-2-21 HONOR Confidential Page1, Total4 External Photos of TFY-LX2 TFY-LX2 Smart Phone 2022-2-21 HONOR Confidential Page2, Total4 1. Front-TFY-LX2 2. Back-TFY-LX2 TFY-LX2 Smart Phone 2022-2-21 HONOR Confidential Page3, Total4 3. Right-TFY-LX2 4.Left-TFY-LX2 TFY-LX2 Smart Phone 2022-2-21 HONOR Confidential Page4, Total4 5.Top-TFY-LX2 6. Bottom-TFY-LX2

TFY-LX2 Smart Phone 2022-2-21 HONOR Confidential Page1, Total2 Label and label Location: FCC ID electronic label: Settings-->System & updates-->Regulatory information TFY-LX2 Smart Phone 2022-2-21 HONOR Confidential Page2, Total2

TFY-LX2 Smart Phone 2022-2-21 HONOR Confidential Page1, Total4 Internal Photos of TFY-LX2 TFY-LX2 Smart Phone 2022-2-21 HONOR Confidential Page2, Total4 TFY-LX2 Smart Phone 2022-2-21 HONOR Confidential Page3, Total4 TFY-LX2 Smart Phone 2022-2-21 HONOR Confidential Page4, Total4

SAR Test Report Report No.: R2201A0038-S1V1 TA Technology (Shanghai) Co., Ltd. TA-MB-05-003S Page 151 of 210 This report shall not be reproduced except in full, without the written approval of TA Technology (Shanghai) Co., Ltd. Plot 52 U-NII-2C Top Edge Low (Distance 0mm) Date: 2022/2/14 Communication System: UID 0, 802.11acVHT20; Frequency: 5520 MHz;Duty Cycle: 1:1.02 Medium parameters used: f = 5520 MHz; σ = 5.097 S/m; ε r = 35.266; ρ = 1000 kg/m 3 Ambient Temperature:22.3 °C Liquid Temperature: 21.5°C Phantom section: Flat Section DASY5 Configuration: Sensor-Surface: 1.4mm (Mechanical Surface Detection) Probe: EX3DV4 - SN3677; ConvF(5.00, 5.00, 5.00); Calibrated: 2021/8/12 Electronics: DAE4 SN1317; Calibrated: 2021/2/23 Phantom: SAM 1; Type: QD000P40CD; Serial: TP:1666 Measurement SW: DASY52, Version 52.10 (4); SEMCAD X Version 14.6.14 (7483) Top Edge Low/Area Scan (6x12x1): Measurement grid: dx=10mm, dy=10mm Maximum value of SAR (measured) = 27.6 W/kg Top Edge Low/Zoom Scan (7x7x12)/Cube 0: Measurement grid: dx=4mm, dy=4mm, dz=2mm Reference Value = 23.65 V/m; Power Drift = 0.064 dB Peak SAR (extrapolated) = 54.0 W/kg SAR(1 g) = 8.73 W/kg; SAR(10 g) = 2.12 W/kg Maximum value of SAR (measured) = 30.1 W/kg SAR Test Report Report No.: R2201A0038-S1V1 TA Technology (Shanghai) Co., Ltd. TA-MB-05-003S Page 152 of 210 This report shall not be reproduced except in full, without the written approval of TA Technology (Shanghai) Co., Ltd. ANNEX D: Probe Calibration Certificate SAR Test Report Report No.: R2201A0038-S1V1 TA Technology (Shanghai) Co., Ltd. TA-MB-05-003S Page 153 of 210 This report shall not be reproduced except in full, without the written approval of TA Technology (Shanghai) Co., Ltd. SAR Test Report Report No.: R2201A0038-S1V1 TA Technology (Shanghai) Co., Ltd. TA-MB-05-003S Page 154 of 210 This report shall not be reproduced except in full, without the written approval of TA Technology (Shanghai) Co., Ltd. SAR Test Report Report No.: R2201A0038-S1V1 TA Technology (Shanghai) Co., Ltd. TA-MB-05-003S Page 155 of 210 This report shall not be reproduced except in full, without the written approval of TA Technology (Shanghai) Co., Ltd. SAR Test Report Report No.: R2201A0038-S1V1 TA Technology (Shanghai) Co., Ltd. TA-MB-05-003S Page 156 of 210 This report shall not be reproduced except in full, without the written approval of TA Technology (Shanghai) Co., Ltd. SAR Test Report Report No.: R2201A0038-S1V1 TA Technology (Shanghai) Co., Ltd. TA-MB-05-003S Page 157 of 210 This report shall not be reproduced except in full, without the written approval of TA Technology (Shanghai) Co., Ltd. SAR Test Report Report No.: R2201A0038-S1V1 TA Technology (Shanghai) Co., Ltd. TA-MB-05-003S Page 158 of 210 This report shall not be reproduced except in full, without the written approval of TA Technology (Shanghai) Co., Ltd. SAR Test Report Report No.: R2201A0038-S1V1 TA Technology (Shanghai) Co., Ltd. TA-MB-05-003S Page 159 of 210 This report shall not be reproduced except in full, without the written approval of TA Technology (Shanghai) Co., Ltd. SAR Test Report Report No.: R2201A0038-S1V1 TA Technology (Shanghai) Co., Ltd. TA-MB-05-003S Page 160 of 210 This report shall not be reproduced except in full, without the written approval of TA Technology (Shanghai) Co., Ltd. SAR Test Report Report No.: R2201A0038-S1V1 TA Technology (Shanghai) Co., Ltd. TA-MB-05-003S Page 161 of 210 This report shall not be reproduced except in full, without the written approval of TA Technology (Shanghai) Co., Ltd. ANNEX E: D835V2 Dipole Calibration Certificate SAR Test Report Report No.: R2201A0038-S1V1 TA Technology (Shanghai) Co., Ltd. TA-MB-05-003S Page 162 of 210 This report shall not be reproduced except in full, without the written approval of TA Technology (Shanghai) Co., Ltd. SAR Test Report Report No.: R2201A0038-S1V1 TA Technology (Shanghai) Co., Ltd. TA-MB-05-003S Page 163 of 210 This report shall not be reproduced except in full, without the written approval of TA Technology (Shanghai) Co., Ltd. SAR Test Report Report No.: R2201A0038-S1V1 TA Technology (Shanghai) Co., Ltd. TA-MB-05-003S Page 164 of 210 This report shall not be reproduced except in full, without the written approval of TA Technology (Shanghai) Co., Ltd. SAR Test Report Report No.: R2201A0038-S1V1 TA Technology (Shanghai) Co., Ltd. TA-MB-05-003S Page 165 of 210 This report shall not be reproduced except in full, without the written approval of TA Technology (Shanghai) Co., Ltd. SAR Test Report Report No.: R2201A0038-S1V1 TA Technology (Shanghai) Co., Ltd. TA-MB-05-003S Page 166 of 210 This report shall not be reproduced except in full, without the written approval of TA Technology (Shanghai) Co., Ltd. SAR Test Report Report No.: R2201A0038-S1V1 TA Technology (Shanghai) Co., Ltd. TA-MB-05-003S Page 167 of 210 This report shall not be reproduced except in full, without the written approval of TA Technology (Shanghai) Co., Ltd. SAR Test Report Report No.: R2201A0038-S1V1 TA Technology (Shanghai) Co., Ltd. TA-MB-05-003S Page 168 of 210 This report shall not be reproduced except in full, without the written approval of TA Technology (Shanghai) Co., Ltd. SAR Test Report Report No.: R2201A0038-S1V1 TA Technology (Shanghai) Co., Ltd. TA-MB-05-003S Page 169 of 210 This report shall not be reproduced except in full, without the written approval of TA Technology (Shanghai) Co., Ltd. ANNEX F: D1900V2 Dipole Calibration Certificate SAR Test Report Report No.: R2201A0038-S1V1 TA Technology (Shanghai) Co., Ltd. TA-MB-05-003S Page 170 of 210 This report shall not be reproduced except in full, without the written approval of TA Technology (Shanghai) Co., Ltd. SAR Test Report Report No.: R2201A0038-S1V1 TA Technology (Shanghai) Co., Ltd. TA-MB-05-003S Page 171 of 210 This report shall not be reproduced except in full, without the written approval of TA Technology (Shanghai) Co., Ltd. SAR Test Report Report No.: R2201A0038-S1V1 TA Technology (Shanghai) Co., Ltd. …

Text truncated - open the document above for the full version.

Prepared by: Fangying Wei Approved by: Guangchang Fan TA Technology (Shanghai) Co., Ltd. No.145, Jintang Rd, Tangzhen Industry Park, Pudong Shanghai, China TEL: +86-021-50791141/2/3 FAX: +86-021-50791141/2/3-8000 SAR TEST REPORT Applicant Honor Device Co., Ltd. FCC ID 2AYGCTFY-LX2 Product Smart Phone Model TFY-LX2 Report No. R2201A0038-S1V1 Issue Date February 28, 2022 TA Technology (Shanghai) Co., Ltd. tested the above equipment in accordance with the requirements in IEEE 1528- 2013, ANSI C95.1: 1992, IEEE C95.1: 1991. The test results show that the equipment tested is capable of demonstrating compliance with the requirements as documented in this report. SAR Test Report Report No.: R2201A0038-S1V1 TA Technology (Shanghai) Co., Ltd. TA-MB-05-003S Page 2 of 210 This report shall not be reproduced except in full, without the written approval of TA Technology (Shanghai) Co., Ltd. Table of Contents 1 Test Laboratory ............................................................................................................................... 5 1.1 Notes of the Test Report ......................................................................................................... 5 1.2 Test facility .............................................................................................................................. 5 1.3 Testing Location ...................................................................................................................... 5 1.4 Laboratory Environment .......................................................................................................... 6 2 Statement of Compliance ............................................................................................................... 7 3 Description of Equipment under Test .............................................................................................. 9 4 Test Specification, Methods and Procedures ............................................................................... 12 5 Operational Conditions during Test .............................................................................................. 13 5.1 Test Positions ........................................................................................................................ 13 5.1.1 Against Phantom Head ................................................................................................... 13 5.1.2 Body Worn Configuration ................................................................................................ 13 5.1.3 Phablet SAR test considerations ................................................................................... 14 5.2 Measurement Variability ........................................................................................................ 15 5.3 Test Configuration ................................................................................................................. 16 5.3.1 GSM Test Configuratio n ................................................................................................. 16 5.3.2 UMTS Test Configuration ............................................................................................... 16 5.3.3 LTE Test Configuration ................................................................................................... 20 5.3.4 Additional requirements for TDD LTE specification .................................................... 21 5.3.5 Wi-Fi Test Configuration ................................................................................................. 25 5.3.6 BT Test Configuration ..................................................................................................... 26 5.3.7 Power reduced detection mechanism specification .................................................... 27 5.3.8 Country code detection mechanism .............................................................................. 28 6 SAR Measurements System Configuration .................................................................................. 29 6.1 SAR Measurement Set-up .................................................................................................... 29 6.2 DASY5 E-field Probe System ................................................................................................ 30 6.3 SAR Measurement Procedure .............................................................................................. 31 7 Main Test Equipment .................................................................................................................... 33 8 Tissue Dielectric Parameter Measurements & System Verification .............................................. 34 8.1 Tissue Verification ................................................................................................................. 34 8.2 System Performance Check .................................................................................................. 36 8.3 SAR System Va lidation ......................................................................................................... 39 9 Normal and Maximum Output Power ........................................................................................... 40 9.1 GSM Mode ............................................................................................................................ 40 9.2 WCDMA Mode ...................................................................................................................... 42 9.3 LTE Mode .............................................................................................................................. 45 9.4 WLAN Mode .......................................................................................................................... 64 9.5 Bluetooth Mode ..................................................................................................................... 72 10 Measured and Reported (Sc…

Text truncated - open the document above for the full version.

Prepared by: Peng Tao Approved by: Kai Xu TA Technology (Shanghai) Co., Ltd. No.145, Jintang Rd, Tangzhen Industry Park, Pudong Shanghai, China TEL: +86-021-50791141/2/3 FAX: +86-021-50791141/2/3-8000 RF TEST REPORT Applicant Honor Device Co., Ltd. FCC ID 2AYGCTFY-LX2 Product Smart Phone Model TFY-LX2 Report No. R2201A0038-R5 Issue Date February 11, 2022 TA Technology (Shanghai) Co., Ltd. tested the above equipment in accordance with the requirements in FCC CFR47 Part 15C (2020). The test results show that the equipment tested is capable of demonstrating compliance with the requirements as documented in this report. RF Test Report Report No.: R2201A0038-R5 TA Technology (Shanghai) Co., Ltd. TA-MB-04-004R Page 2 of 68 This report shall not be reproduced except in full, without the written approval of TA Technology (Shanghai) Co., Ltd. TABLE OF CONTENT 1 Test Laboratory ............................................................................................................................ 5 1.1 Notes of the Test Report ......................................................................................................... 5 1.2. Test facility ............................................................................................................................ 5 1.3 Testing Location ...................................................................................................................... 5 2 General Description of Equipment under Test .......................................................................... 6 2.1 Applicant and Manufacturer Information.................................................................................. 6 2.2 General information ................................................................................................................. 6 3 Applied Standards ........................................................................................................................ 8 4 Information about the FHSS characteristics .............................................................................. 9 4.1 Frequency Hopping System Requirement............................................................................... 9 4.2 Pseudorandom Frequency Hopping Sequence ..................................................................... 10 4.3 Equal Hopping Frequency Use .............................................................................................. 11 4.4 System Receiver Input Bandwidth ......................................................................................... 11 4.5 Test Configuration ................................................................................................................. 12 5 Test Case Results ....................................................................................................................... 13 5.1 Peak Power Output ............................................................................................................... 13 5.2 Occupied Bandwidth (20dB) .................................................................................................. 17 5.3 Frequency Separation ........................................................................................................... 21 5.4 Time of Occupancy (Dwell Time) ........................................................................................... 25 5.5 Band Edge Compliance ........................................................................................................ 29 5.6 Number of hopping Frequency .............................................................................................. 36 5.7 Spurious RF Conducted Emissions ....................................................................................... 38 5.8 Unwanted Emission .............................................................................................................. 43 5.9 Conducted Emission ............................................................................................................. 62 6 Main Test Instruments ................................................................................................................ 65 ANNEX A: The EUT Appearance ...................................................................................................... 66 ANNEX B: Test Setup Photos ........................................................................................................... 67 ANNEX C: Product Change Description .......................................................................................... 68 RF Test Report Report No.: R2201A0038-R5 TA Technology (Shanghai) Co., Ltd. TA-MB-04-004R Page 3 of 68 This report shall not be reproduced except in full, without the written approval of TA Technology (Shanghai) Co., Ltd. ummary of Measurement Results Number Test Case Clause in FCC rules Verdict 1 Frequency Hopping System 15.247 (g), (h) PASS 2 Peak Power Output 15.247(b)(1) PASS 3 Occupied Bandwidth (20dB) 15.247(a)(1) PASS 4 Frequency Separation 15.247(a)(1) PASS 5 Time of Occupancy (Dwell Time) 15.247(a)(1…

Text truncated - open the document above for the full version.