
Text extracted from the exhibit documents filed with the FCC. Open a document above to read the original.
Quick Start Guide TFY-LX1 TFY-LX2 TFY- LX3 Know Your Device Before using the device, familiarize yourself with its basic operations. •To power on your device, press and hold the power button until the screen turns on. •To power off your device, press and hold the power button, and then touch . •To restart your device, press and hold the power button, and then touch . •Press and hold the power button for 10 or more seconds to force restart your device. NFC Volume button Power button/Fingerprint sensor USB Type-C portHeadset jack Card slot •Only TFY-LX1 supports NFC. Please keep the NFC area close to other devices or objects while using the NFC function. •Check out the pre-installed Tips app and master all the great features on your device. 1 Getting Started •Be careful not to scratch your device or hurt yourself when using the eject pin. •Store the eject pin out of the reach of children to prevent accidental swallowing or injury. •Do not use cut or modified SIM cards with your device as these may not be recognized and could damage the card tray (slot). •If your SIM card does not match your device, please contact your carrier. Follow the instructions in the following figures to set up your device. Please use the eject pin included. Ensure that the card is correctly aligned and that the card tray is level when you insert it into your device. Single-SIM card: Dual-SIM card: SIM Card Management Select the default mobile data card and calling card as needed. For details, check out the pre-installed Tips app. 2 •4G service depends on the support of your network carrier and its deployment of relevant services. Please contact your carrier to activate 4G service. •4G service may be unavailable in certain areas due to network interference. •If this guide is inconsistent with the description on the official website, the latter prevails. For More Information If you encounter any problems while using your device, you can obtain help from the following resources: •Visit https://www.hihonor.com to view device information and other information. •Visit https://www.hihonor.com/global/support/ for the most up-to-date contact information for your country or region. •Go to Settings and enter the following keywords in the search box to view the corresponding information. E.g. Legal information, Safety information, Authentication info, Regulatory information. •Depending on the region or model, some devices are required to receive approval from the Federal Communications Commission (FCC). If your device is approved by the FCC, you can go to Settings and touch System & updates > Regulatory information to view FCC ID. If your device does not have an FCC ID, the device has not been authorized for sale in the U.S. or its territories and may only be brought to the U.S. for the owner's personal use. Safety Information Please read all of the safety information carefully before using your device to ensure its safe and proper operation and to learn how to dispose of your device properly. Operation and safety • To prevent possible hearing damage, do not listen at high volume levels for long periods. •Using an unapproved or incompatible power adapter, charger, or battery may damage your device, shorten its lifespan, or cause a fire, explosion, or other hazards. 3 •Ideal operating temperatures are 0 °C to 35 °C. Ideal storage temperatures are -20 °C to +45 °C. •Pacemaker manufacturers recommend that a minimum distance of 15 cm be maintained between a device and a pacemaker to prevent potential interference with the pacemaker. If using a pacemaker, hold the device on the side opposite the pacemaker and do not carry the device in your front pocket. •Keep the device and the battery away from excessive heat and direct sunlight. Do not place them on or in heating devices, such as microwave ovens, stoves, or radiators. •Observe local laws and regulations while using the device. To reduce the risk of accidents, do not use your wireless device while driving. •While flying in an aircraft or immediately before boarding, only use your device according to instructions provided. Use of a wireless device in an aircraft may disrupt wireless networks, present a hazard to aircraft operation, or be illegal. •In order to avoid damaging the internal circuit of the device or charger, do not use the device in a dusty, damp, or dirty place, or near a magnetic field. •When charging the device, make sure the power adapter is plugged into a socket near the devices and is easily accessible. •Unplug the charger from electrical outlets and the device when not in use. •Do not use, store or transport the device where flammables or explosives are stored (in a gas station, oil depot, or chemical plant, for example). Using your device in these environments increases the risk of explosion or fire. •Keep the battery away from fire, and do not disassemble, modify, throw, or squeeze it. Do not insert foreign objects into it, submerge it in water or other liquids, or expose it to external force or pressure, as this may cause the battery to leak, overheat, catch fire, or even explode. •Dispose of this device, the battery, and accessories according to local regulations. They should not be disposed of in normal household waste. Improper battery use may lead to fire, explosion, or other hazards. 4 •This device contains a built-in battery. Do not attempt to replace the battery by yourself. Otherwise, the device may not run properly or it may damage the battery. For your personal safety and to ensure that your device runs properly, you are strongly advised to contact an authorized service center for a replacement. Disposal and Recycling Information The symbol on the product, battery, literature, or packaging means that the products and batteries should be taken to separate waste collection points designated by local authorities at the end of the lifespan. This will ensure that EEE waste is recycled and treated in a manner that conserves valuable materials and protects…
Text truncated - open the document above for the full version.
18_Confidentiality Letter V1.0 Honor Device Co., Ltd. Federal Communications Commission 2022-02-09 Oakland Mills Road Columbia MD 21046 Subject: Request for Confidentiality FCC ID: 2AYGCTFY-LX3 To Whom It May Concern: Pursuant to the provisions of Sections 0.457 and 0.459 of the Commission’s rules (47 CFR §§ 0.457, 0.459), we are requesting the Commission to withhold the following attachments as confidential document from public disclosure indefinitely. Schematic Diagram Block Diagram Operational Description Bom List Tune-Up Procedure Above mentioned document contains detailed system and equipment description are considered as proprietary information in operation of the equipment. The public disclosure of above documents might be harmful to our company and would give competitor an unfair advantage in the market. ***************************************************************************** In additional to above mentioned documents, pursuant to Public Notice DA 04-1705 of the Commission’s policy, in order to comply with the marketing regulations in 47 CFR §2.803 and the importation rules in 47 CFR §2.1204, while ensuring that business sensitive information remains confidential until the actual marketing of newly authorized devices. We are requesting the Commission withholds the following documents from public viewing until 2022-08-07 External Photos Internal Photos Test Setup Photos User Manual ****************************************************************************** It is our understanding that all measurement test reports, FCC ID label format and correspondent during certification review process cannot be granted as confidential documents and those information will be available for public review once the grant of equipment authorization is issued. Best Regards 18_Confidentiality Letter V1.0 Liming Laboratory Manager Honor Device Co., Ltd. E-mail: [email protected] Tel: 8613760231984 Fax: NA
20_Authorization Letter V1.0 Honor Device Co., Ltd. Federal Communications Commission 2022-02-21 Oakland Mills Road Columbia MD 21046 Letter of Authorization To whom it may concern: We the undersigned, hereby authorize TĂśV Rheinland (Shenzhen) Co., Ltd.to act on our behalf in all manners relating to application for equipment authorization, including signing of all documents relating to these matters. Any and all acts carried out by TĂśV Rheinland (Shenzhen) Co., Ltd.on our behalf shall have the same affect as acts of our own. I, the undersigned, hereby certify that we are not subject to a denial of federal benefits, that includes FCC benefits, pursuant to Section 5301 of the Anti-Drug Abuse Act of 1988, 21 U.S.C. 862. This authorization is valid until further written notice from Honor Device Co., Ltd. . Sincerely, For and Behalf of: Honor Device Co., Ltd. Liming Certification Manager r Honor Device Co., Ltd. E-mail: [email protected] Tel: 0755-61886688 Fax: NA
23_Electronic Label Letter V1.0 Honor Device Co., Ltd. Federal Communications Commission 2022-02-21 Oakland Mills Road Columbia MD 21046 Subject: Electronic Label Letter FCC ID: 2AYGCTFY-LX3. To Whom It May Concern: Pursuant to the provisions of KDB 784748 D02 e labeling v02, we hereby provide the following statement: This device have a integrated display screen can present the required label information electronically (e-label) in lieu of a physical label or nameplate. The end user can access the electronic label with three steps. The information of electronic label is programmed by Honor, any can’t be modified by any third party. If have any questions concerning the above, please contact the undersigned. Best Regards Name, Surname: Liming Position/Title:Certification Manager Honor Device Co., Ltd. Address: Suite 3401, Unit A, Building 6, Shum Yip Sky Park, No. 8089, Hongli West Road, Xiangmihu Street, Futian District, Shenzhen, Guangdong 518040, People's Republic of China E-mail: [email protected] Tel: 0755-61886688
TFY-LX3 Smart Phone 2022-2-9 HONOR Confidential Page1, Total3 External Photos of TFY-LX3 TFY-LX3 Smart Phone 2022-2-9 HONOR Confidential Page2, Total3 1. Front-TFY-LX3 2. Back-TFY-LX3 3. Right-TFY-LX3 4.Left-TFY-LX3 TFY-LX3 Smart Phone 2022-2-9 HONOR Confidential Page3, Total3 5.Top-TFY-LX3 6. Bottom-TFY-LX3
TFY-LX3 Smart Phone 2022-2-9 HONOR Confidential Page1, Total2 Label and label Location: FCC ID electronic label: Settings-->System & updates-->Regulatory information TFY-LX3 Smart Phone 2022-2-9 HONOR Confidential Page2, Total2
TFY-LX3 Smart Phone 2022-2-9 HONOR Confidential Page1, Total4 Internal Photos of TFY-LX3 TFY-LX3 Smart Phone 2022-2-9 HONOR Confidential Page2, Total4 TFY-LX3 Smart Phone 2022-2-9 HONOR Confidential Page3, Total4 TFY-LX3 Smart Phone 2022-2-9 HONOR Confidential Page4, Total4
TA Techn o Code CFR demonstrat P TA T N A F P M R Is ology (Shangh R47 Part15B ( ting complian Prepared by: W Techn No.145, Jintan EM Applicant CC ID roduct Model Report No ssue Dat hai) Co., Ltd. (2020)/ ANSI nce with the re Wei Liu ology g Rd, Tangzhe TEL: +8 FAX: +86- 0 MC TE t Hon 2A Y Sma TFY o. R22 e Feb tested the ab C63.4 (2014 equirements y (Shan en Industry Pa 6-021-507911 021-50791141 EST R or Device YGCTFY-L art Phone Y-LX3 01A003 6 ruary 16, bove equipme ). The test res as document Approved by nghai) ark, Pudong Sh 141/2/3 1/2/3-8000 REPO e Co., Ltd LX3 e 6-E1V2 2022 ent in accorda sults show th ted in this rep y: Guangchan ) Co., L hanghai, Chin ORT d. ance with the at the equipm port. ng Fan Ltd. a e requirement ment tested is ts in FCC capable of E TA Techno This report sh 1 Test L 1.1 N 1.2 T 1.3 T 2 Gene 2.1 A 2.2 G 2.3 A 2.4 T 3 Test C 3.1 R 3.2 C 4 Main ANNEX A ANNEX B EMC Test Repo ology (Shang hall not be repr Laboratory .. Notes of the Test facility . Testing Loca eral Descript Applicant an General info Applied Stan Test Mode ... Case Result Radiated Em Conducted E Test Instrum A: The EUT A B: Test Setup ort ghai) Co., Lt roduced except .................. Test Repo r .................. ation ........... tion of Equip nd Manufactu rmation ...... ndards ........ .................. ts ............... mission ....... Emission .... ments ......... Appearance p Photos ..... td. tin full, without Table ................... rt ................. ................... ................... pment under urer Informa ................... ................... ................... ................... ................... ................... ................... ................... ................... TA-MB-0 t the written ap e of Con ................... ................... ................... ................... r Test .......... ation............ ................... ................... ................... ................... ................... ................... ................... ................... ................... 06-001E pproval of TA Te tents .................. .................. .................. .................. .................. .................. .................. .................. .................. .................. .................. .................. .................. .................. .................. Report No echnology (Shan .................. .................. .................. .................. .................. .................. .................. .................. .................. .................. .................. .................. .................. .................. .................. .: R2201A0036 Pag nghai) Co., Ltd. ................... ................... ................... ................... ................... ................... ................... ................... ................... ................... ................... ................... ................... ................... ................... -E1V2 ge 2 of 24 ................ 5 ................ 5 ................ 5 ................ 5 ................ 6 ................ 6 ................ 6 ................ 8 ................ 9 .............. 10 .............. 10 .............. 17 .............. 22 .............. 23 .............. 24 E TA Techno This report sh Versio Rev.0 Rev.1 Rev.2 Note: T previou previou EMC Test Repo ology (Shang hall not be repr on Revisio 0 Initial is 1 Update 2 Add FM This revised usly issued usly issued ort ghai) Co., Lt roduced except on descript ssue of repo e information M data. report (Rep report (Repo report and d td. tin full, without tion ort. n in Page 6 a port No. R22 ort No. R220 dispose of it TA-MB-0 t the written ap and Page 7. 201A0036-E 01A0036-E1 accordingly 06-001E pproval of TA Te . E1V2) supers 1V1). Please y. Report No echnology (Shan Ja Fe Feb sedes and r e discard or .: R2201A0036 Pag nghai) Co., Ltd. Issue Date nuary 28, 20 ebruary 9, 20 bruary 16, 2 replaces the destroy the -E1V2 ge 3 of 24 e 022 022 2022 e E TA Techno This report sh Num 1 2 Date of Date of Note: A (Shang Uncert a EMC Test Repo ology (Shang hall not be repr mber Tes Ra 2 Co f Testing: Ja f Sample Re All indication hai) Co., Lt d ainties were ort ghai) Co., Lt roduced except Sum st Case diated Emis nducted Em nuary 13, 20 eceived: Jan s of Pass/Fa d. based on not taken i n td. tin full, without mmary of ssion mission 022 ~ Janua nuary 10, 20 ail in this rep interpretatio nto account TA-MB-0 t the written ap f measur Clause in FCC Part1 FCC Part1 ary 14, 2022 22 port are opin ons and/or o and are pub 06-001E pproval of TA Te rement re FCC Rules 5.109, ANS 5.107, ANS 2 and Februa nions expres observations blished for in Report No echnology (Shan esults I C63.4-201 I C63.4-201 ary 15, 2022 ssed by TA T s of test resu nformational .: R2201A0036 Pag nghai) Co., Ltd. Concl 4 PA 4 PA 2(for FM) Technology ults. Measur l purposes o -E1V2 ge 4 of 24 usion ASS ASS rement only. E TA Techno This report sh 1 Test 1.1 Not This repor (shangha conditions into accou regulatory 1.2 Tes FCC (Des TA Techn list of test A2LA (Ce TA Techn Accredita t 1.3 Tes Compa Addres City: Post c o Country Contac Telepho Fax: Websit e E-mail: EMC Test Repo ology (Shang hall not be repr t Labora tes of the rt shall not b ai) co., Ltd. s and modes unt and are p y compliance st facility signation nu ology (Shan facilities rec ertificate Nu ology (Shan tion to perfo sting Loca any: TA s: No Sh ode: 20 y: P. t: F a one: +8 +8 e: ht fa ort ghai) Co., Lt roduced except atory Test Repo be reproduce The results s of operatio published fo e of the app umber: CN1 nghai) Co., L cognized to umber: 3857 nghai) Co., L rm measure ation A Technolog o.145, Jinta hanghai 01201 R. China an Guangch 86-021-5079 86-021-5079 ttp://www.ta- nguangchan td. tin full, without ort ed in full or p documented on as describ or informatio licable stand 1179, Test F Ltd. has bee perform m e 7.01) Ltd. has bee ement. y (Sha…
Text truncated - open the document above for the full version.
EMC Test Setup Report No.: R2201A0036 TA Technology (Shanghai) Co., Ltd. TA-MB-06-001E Page 1 of 3 This report shall not be reproduced except in full, without the written approval of TA Technology (Shanghai) Co., Ltd. Part 15B Test Setup EMC Test Setup Report No.: R2201A0036 TA Technology (Shanghai) Co., Ltd. TA-MB-06-001E Page 2 of 3 This report shall not be reproduced except in full, without the written approval of TA Technology (Shanghai) Co., Ltd. Picture 1: Radiated Emission Test Setup EMC Test Setup Report No.: R2201A0036 TA Technology (Shanghai) Co., Ltd. TA-MB-06-001E Page 3 of 3 This report shall not be reproduced except in full, without the written approval of TA Technology (Shanghai) Co., Ltd. Picture 2: Conducted Emissions Test Setup
| # | Rule Parts | Frequency Range | Power Output |
|---|---|---|---|
| 1 | 15B | 88 MHz - 108 MHz | - |

Smart Watch
Equipment Class
DSS - Part 15 Spread Spectrum TransmitterSmart Phone
Equipment Class
DSS - Part 15 Spread Spectrum Transmitter
Smart Phone
Equipment Class
DSS - Part 15 Spread Spectrum Transmitter
Smart Phone
Equipment Class
DSS - Part 15 Spread Spectrum Transmitter
Smart Phone
Equipment Class
JBP - Part 15 Class B Computing Device Peripheral