2AYGCVNE-LX3Smart Phone

Quick Start Guide VNE-LX1 VNE-LX2 VNE-LX3 Know Your Device Before using the device, familiarize yourself with its basic operations. •To power on your device, press and hold the power button until the screen turns on. •To power off your device, press and hold the power button, and then touch . •To restart your device, press and hold the power button, and then touch . •Press and hold the power button for 10 or more seconds to force restart your device. NFC Volume button Power button/ Fingerprint sensor USB Type-C portHeadset jack Card slot •Only VNE-LX1 supports NFC. Please keep the NFC area close to other devices or objects while using the NFC function. •Check out the pre-installed Tips app and master all the great features on your device. 1 Getting Started •Be careful not to scratch your device or hurt yourself when using the eject pin. •Store the eject pin out of the reach of children to prevent accidental swallowing or injury. •Do not use cut or modified SIM or microSD cards with your device as these may not be recognized and could damage the card tray (slot). •If your SIM card does not match your device, please contact your carrier. Follow the instructions in the following figures to set up your device. Please use the eject pin included. Ensure that the card is correctly aligned and that the card tray is level when you insert it into your device. Single-SIM card: Dual-SIM card: SIM Card Management Select the default mobile data card and calling card as needed. For details, check out the pre-installed Tips app. 2 •4G service depends on the support of your network carrier and its deployment of relevant services. Please contact your carrier to activate 4G service. •4G service may be unavailable in certain areas due to network interference. •If this guide is inconsistent with the description on the official website, the latter prevails. For More Information If you encounter any problems while using your device, you can obtain help from the following resources: •Visit https://www.hihonor.com to view device information and other information. •Visit https://www.hihonor.com/global/support/ for the most up-to-date contact information for your country or region. •Go to Settings and enter the following keywords in the search box to view the corresponding information. E.g. Legal information, Safety information, Authentication info, Regulatory information. •Depending on the region or model, some devices are required to receive approval from the Federal Communications Commission (FCC). If your device is approved by the FCC, you can go to Settings and touch System & updates > Regulatory information to view FCC ID. If your device does not have an FCC ID, the device has not been authorized for sale in the U.S. or its territories and may only be brought to the U.S. for the owner's personal use. Safety Information Please read all of the safety information carefully before using your device to ensure its safe and proper operation and to learn how to dispose of your device properly. Operation and safety • To prevent possible hearing damage, do not listen at high volume levels for long periods. 3 •Using an unapproved or incompatible power adapter, charger, or battery may damage your device, shorten its lifespan, or cause a fire, explosion, or other hazards. •Ideal operating temperatures are 0 °C to 35 °C. Ideal storage temperatures are -20 °C to +45 °C. •Pacemaker manufacturers recommend that a minimum distance of 15 cm be maintained between a device and a pacemaker to prevent potential interference with the pacemaker. If using a pacemaker, hold the device on the side opposite the pacemaker and do not carry the device in your front pocket. •Keep the device and the battery away from excessive heat and direct sunlight. Do not place them on or in heating devices, such as microwave ovens, stoves, or radiators. •Observe local laws and regulations while using the device. To reduce the risk of accidents, do not use your wireless device while driving. •While flying in an aircraft or immediately before boarding, only use your device according to instructions provided. Use of a wireless device in an aircraft may disrupt wireless networks, present a hazard to aircraft operation, or be illegal. •In order to avoid damaging the internal circuit of the device or charger, do not use the device in a dusty, damp, or dirty place, or near a magnetic field. •When charging the device, make sure the power adapter is plugged into a socket near the devices and is easily accessible. •Unplug the charger from electrical outlets and the device when not in use. •Do not use, store or transport the device where flammables or explosives are stored (in a gas station, oil depot, or chemical plant, for example). Using your device in these environments increases the risk of explosion or fire. •Keep the battery away from fire, and do not disassemble, modify, throw, or squeeze it. Do not insert foreign objects into it, submerge it in water or other liquids, or expose it to external force or pressure, as this may cause the battery to leak, overheat, catch fire, or even explode. 4 •Dispose of this device, the battery, and accessories according to local regulations. They should not be disposed of in normal household waste. Improper battery use may lead to fire, explosion, or other hazards. •This device contains a built-in battery. Do not attempt to replace the battery by yourself. Otherwise, the device may not run properly or it may damage the battery. For your personal safety and to ensure that your device runs properly, you are strongly advised to contact an authorized service center for a replacement. Disposal and Recycling Information The symbol on the product, battery, literature, or packaging means that the products and batteries should be taken to separate waste collection points designated by local authorities at the end of the lifespan. This will ensure that EEE waste is recycled and treated in a manner that conserves valuable materials a…

Text truncated - open the document above for the full version.

HONOR HONOR Confidential Authorization Letter Date:23 April 2022 Federal Communications Commission Oakland Mills Road Columbia MD 21046 To whom it may concern: We the undersigned, hereby authorize TÜV Rheinland (Shenzhen) Co., Ltd to act on our behalf in all manners relating to application for equipment authorization, including signing of all documents relating to these matters. Any and all acts carried out by TÜV Rheinland (Shenzhen) Co., Ltd on our behalf shall have the same affect as acts of our own. I, the undersigned, hereby certify that we are not subject to a denial of federal benefits, that includes FCC benefits, pursuant to Section 5301 of the Anti-Drug Abuse Act of 1988, 21 U.S.C. 862. This authorization is valid until further written notice from Honor Device Co., Ltd. . Name, Surname: Liming Position/Title:Certification Manager Honor Device Co., Ltd. Address: Shum Yip Sky Park, No. 8089, Hongli West Road, Shenzhen, China E-mail: [email protected] Tel: 0755-61886688

HONOR HONOR Confidential Confidentiality Letter Date: July 29, 2022 Federal Communications Commission Oakland Mills Road Columbia MD 21046 Subject: Request for Confidentiality FCC ID: 2AYGCVNE-LX3 To Whom It May Concern: Pursuant to the provisions of Sections 0.457 and 0.459 of the Commission’s rules (47 CFR §§ 0.457, 0.459), we are requesting the Commission to withhold the following attachments as confidential document from public disclosure indefinitely. Schematic Diagram Block Diagram Operational Description Bom List Tune-Up Procedure KDB Inquiry Above mentioned document contains detailed system and equipment description are considered as proprietary information in operation of the equipment. The public disclosure of above documents might be harmful to our company and would give competitor an unfair advantage in the market. ***************************************************************************** In additional to above mentioned documents, pursuant to Public Notice DA 04-1705 of the Commission’s policy, in order to comply with the marketing regulations in 47 CFR §2.803 and the importation rules in 47 CFR §2.1204, while ensuring that business sensitive information remains confidential until the actual marketing of newly authorized devices. We are requesting the Commission withholds the following documents from public viewing until 2022-11-1 External Photos Internal Photos Test Setup Photos User Manual ****************************************************************************** It is our understanding that all measurement test reports, FCC ID label format and correspondent during certification review process cannot be granted as confidential documents and those information will be available for public review once the grant of equipment authorization is issued. Best Regards HONOR HONOR Confidential Name, Surname: Liming Position/Title:Certification Manager Honor Device Co., Ltd. Address: Shum Yip Sky Park, No. 8089, Hongli West Road, Shenzhen, China E-mail: [email protected] Tel: 0755-61886688

HONOR HONOR Confidential Electronic Label Letter Date: July 29, 2022 Federal Communications Commission Oakland Mills Road Columbia MD 21046 Subject:Electronic Label Letter FCC ID:2AYGCVNE-LX3. To Whom It May Concern: Pursuant to the provisions of KDB 784748 D02 e labeling v02, we hereby provide the following statement: This device have a integrated display screen can present the required label information electronically (e-label) in lieu of a physical label or nameplate. The end user can access the electronic label with three steps. The information of electronic label is programmed by Honor, any can’t be modified by any third party. If have any questions concerning the above, please contact the undersigned. Best Regards Name, Surname: Liming Position/Title:Certification Manager Honor Device Co., Ltd. Address: Shum Yip Sky Park, No. 8089, Hongli West Road, Shenzhen, China E-mail: [email protected] Tel: 0755-61886688

HONOR HONOR Confidential External Photos of VNE-LX3 HONOR HONOR Confidential Front: HONOR HONOR Confidential Back: Left Side: HONOR HONOR Confidential Right Side: Top: HONOR HONOR Confidential Bottom:

HONOR HONOR Confidential Label and Label Location of VNE-LX3 HONOR HONOR Confidential FCC ID electronic label: Settings-->System & updates-->Regulatory information

HONOR HONOR Confidential Internal Photos of VNE-LX3 HONOR HONOR Confidential HONOR HONOR Confidential HONOR HONOR Confidential HONOR HONOR Confidential

Prepared by: Wei Fangying Approved by: Fan Guangchang TA Technology (Shanghai) Co., Ltd. Building 3, No.145, Jintang Rd, Tangzhen Industry Park, Pudong Shanghai, China TEL: +86-021-50791141/2/3 FAX: +86-021-50791141/2/3-8000 SAR TEST REPORT Applicant Honor Device Co., Ltd. FCC ID 2AYGCVNE-LX3 Product Smart Phone Model VNE-LX3 Report No. R2207A0619-S1V2 Issue Date August 2, 2022 TA Technology (Shanghai) Co., Ltd. tested the above equipment in accordance with the requirements in IEEE 1528- 2013, ANSI C95.1: 1992, IEEE C95.1: 1991. The test results show that the equipment tested is capable of demonstrating compliance with the requirements as documented in this report. SAR Test Report Report No.: R2207A0619-S1V2 TA Technology (Shanghai) Co., Ltd. TA-MB-05-003S Page 2 of 326 This report shall not be reproduced except in full, without the written approval of TA Technology (Shanghai) Co., Ltd. Table of Contents 1 Test Laboratory ............................................................................................................................... 5 1.1 Notes of the Test Report ......................................................................................................... 5 1.2 Test facility .............................................................................................................................. 5 1.3 Testing Location ...................................................................................................................... 5 1.4 Laboratory Environment .......................................................................................................... 6 2 Statement of Compliance ............................................................................................................... 7 3 Description of Equipment under Test .............................................................................................. 9 4 Test Specification, Methods and Procedures ............................................................................... 12 5 Operational Conditions during Test .............................................................................................. 13 5.1 Test Positions ........................................................................................................................ 13 5.1.1 Against Phantom Head ................................................................................................... 13 5.1.2 Body Worn Configuration ................................................................................................ 13 5.1.3 Phablet SAR test considerations ................................................................................... 14 5.2 Measurement Variability ........................................................................................................ 15 5.3 Test Configuration ................................................................................................................. 16 5.3.1 GSM Test Configuratio n ................................................................................................. 16 5.3.2 UMTS Test Configuration ............................................................................................... 16 5.3.3 LTE Test Configuration ................................................................................................... 20 5.3.4 Additional requirements for TDD LTE specification .................................................... 21 5.3.5 Wi-Fi Test Configuration ................................................................................................. 24 5.3.6 BT Test Configuration ..................................................................................................... 25 5.3.7 SAR detection mechanism specification ...................................................................... 26 5.3.8 Country code detection mechanism .............................................................................. 27 6 SAR Measurements System Configuration .................................................................................. 29 6.1 SAR Measurement Set-up .................................................................................................... 29 6.2 DASY5 E-field Probe System ................................................................................................ 30 6.3 SAR Measurement Procedure .............................................................................................. 31 7 Main Test Equipment .................................................................................................................... 33 8 Tissue Dielectric Parameter Measurements & System Verification .............................................. 35 8.1 Tissue Verification ................................................................................................................. 35 8.2 System Performance Check .................................................................................................. 37 8.3 SAR System Validation ......................................................................................................... 40 9 Normal and Maximum Output Power ........................................................................................... 41 9.1 GSM Mode ............................................................................................................................ 41 9.2 WCDMA Mode ...................................................................................................................... 44 9.3 LTE Mode .............................................................................................................................. 52 9.4 WLAN Mode ........................................................................................................................ 124 9.5 Bluetooth Mode ................................................................................................................... 139 10 Measured an…

Text truncated - open the document above for the full version.

SAR Test Report Report No.: R2207A0619-S1V2 TA Technology (Shanghai) Co., Ltd. TA-MB-05-003S Page 251 of 326 This report shall not be reproduced except in full, without the written approval of TA Technology (Shanghai) Co., Ltd. ANNEX D: Probe Calibration Certificate SAR Test Report Report No.: R2207A0619-S1V2 TA Technology (Shanghai) Co., Ltd. TA-MB-05-003S Page 252 of 326 This report shall not be reproduced except in full, without the written approval of TA Technology (Shanghai) Co., Ltd. SAR Test Report Report No.: R2207A0619-S1V2 TA Technology (Shanghai) Co., Ltd. TA-MB-05-003S Page 253 of 326 This report shall not be reproduced except in full, without the written approval of TA Technology (Shanghai) Co., Ltd. SAR Test Report Report No.: R2207A0619-S1V2 TA Technology (Shanghai) Co., Ltd. TA-MB-05-003S Page 254 of 326 This report shall not be reproduced except in full, without the written approval of TA Technology (Shanghai) Co., Ltd. SAR Test Report Report No.: R2207A0619-S1V2 TA Technology (Shanghai) Co., Ltd. TA-MB-05-003S Page 255 of 326 This report shall not be reproduced except in full, without the written approval of TA Technology (Shanghai) Co., Ltd. SAR Test Report Report No.: R2207A0619-S1V2 TA Technology (Shanghai) Co., Ltd. TA-MB-05-003S Page 256 of 326 This report shall not be reproduced except in full, without the written approval of TA Technology (Shanghai) Co., Ltd. SAR Test Report Report No.: R2207A0619-S1V2 TA Technology (Shanghai) Co., Ltd. TA-MB-05-003S Page 257 of 326 This report shall not be reproduced except in full, without the written approval of TA Technology (Shanghai) Co., Ltd. SAR Test Report Report No.: R2207A0619-S1V2 TA Technology (Shanghai) Co., Ltd. TA-MB-05-003S Page 258 of 326 This report shall not be reproduced except in full, without the written approval of TA Technology (Shanghai) Co., Ltd. SAR Test Report Report No.: R2207A0619-S1V2 TA Technology (Shanghai) Co., Ltd. TA-MB-05-003S Page 259 of 326 This report shall not be reproduced except in full, without the written approval of TA Technology (Shanghai) Co., Ltd. SAR Test Report Report No.: R2207A0619-S1V2 TA Technology (Shanghai) Co., Ltd. TA-MB-05-003S Page 260 of 326 This report shall not be reproduced except in full, without the written approval of TA Technology (Shanghai) Co., Ltd. ANNEX E: D750V3 Dipole Calibration Certificate SAR Test Report Report No.: R2207A0619-S1V2 TA Technology (Shanghai) Co., Ltd. TA-MB-05-003S Page 261 of 326 This report shall not be reproduced except in full, without the written approval of TA Technology (Shanghai) Co., Ltd. SAR Test Report Report No.: R2207A0619-S1V2 TA Technology (Shanghai) Co., Ltd. TA-MB-05-003S Page 262 of 326 This report shall not be reproduced except in full, without the written approval of TA Technology (Shanghai) Co., Ltd. SAR Test Report Report No.: R2207A0619-S1V2 TA Technology (Shanghai) Co., Ltd. TA-MB-05-003S Page 263 of 326 This report shall not be reproduced except in full, without the written approval of TA Technology (Shanghai) Co., Ltd. SAR Test Report Report No.: R2207A0619-S1V2 TA Technology (Shanghai) Co., Ltd. TA-MB-05-003S Page 264 of 326 This report shall not be reproduced except in full, without the written approval of TA Technology (Shanghai) Co., Ltd. SAR Test Report Report No.: R2207A0619-S1V2 TA Technology (Shanghai) Co., Ltd. TA-MB-05-003S Page 265 of 326 This report shall not be reproduced except in full, without the written approval of TA Technology (Shanghai) Co., Ltd. SAR Test Report Report No.: R2207A0619-S1V2 TA Technology (Shanghai) Co., Ltd. TA-MB-05-003S Page 266 of 326 This report shall not be reproduced except in full, without the written approval of TA Technology (Shanghai) Co., Ltd. SAR Test Report Report No.: R2207A0619-S1V2 TA Technology (Shanghai) Co., Ltd. TA-MB-05-003S Page 267 of 326 This report shall not be reproduced except in full, without the written approval of TA Technology (Shanghai) Co., Ltd. SAR Test Report Report No.: R2207A0619-S1V2 TA Technology (Shanghai) Co., Ltd. TA-MB-05-003S Page 268 of 326 This report shall not be reproduced except in full, without the written approval of TA Technology (Shanghai) Co., Ltd. ANNEX F: D835V2 Dipole Calibration Certificate SAR Test Report Report No.: R2207A0619-S1V2 TA Technology (Shanghai) Co., Ltd. TA-MB-05-003S Page 269 of 326 This report shall not be reproduced except in full, without the written approval of TA Technology (Shanghai) Co., Ltd. SAR Test Report Report No.: R2207A0619-S1V2 TA Technology (Shanghai) Co., Ltd. TA-MB-05-003S Page 270 of 326 This report shall not be reproduced except in full, without the written approval of TA Technology (Shanghai) Co., Ltd. SAR Test Report Report No.: R2207A0619-S1V2 TA Technology (Shanghai) Co., Ltd. TA-MB-05-003S Page 271 of 326 This report shall not be reproduced except in full, without the written approval of TA Technology (Shanghai) Co., Ltd. SAR Test Report Report No.: R2207A0619-S1V2 TA Technology (Shanghai) Co., Ltd. TA-MB-05-003S Page 272 of 326 This report shall not be reproduced except in full, without the written approval of TA Technology (Shanghai) Co., Ltd. SAR Test Report Report No.: R2207A0619-S1V2 TA Technology (Shanghai) Co., Ltd. TA-MB-05-003S Page 273 of 326 This report shall not be reproduced except in full, without the written approval of TA Technology (Shanghai) Co., Ltd. SAR Test Report Report No.: R2207A0619-S1V2 TA Technology (Shanghai) Co., Ltd. TA-MB-05-003S Page 274 of 326 This report shall not be reproduced except in full, without the written approval of TA Technology (Shanghai) Co., Ltd. SAR Test Report Report No.: R2207A0619-S1V2 TA Technology (Shanghai) Co., Ltd. TA-MB-05-003S Page 275 of 326 This report shall not be reproduced except in full, without the written approval of TA Technology (Shanghai) Co., Ltd. SAR Test Report Report No.: R2207A0619-S1V2 TA Technology (Shanghai) Co., Ltd. TA-MB-05-003S Page 276 of 326 This report shall not be reproduced except in full, withou…

Text truncated - open the document above for the full version.

TA Techn o CFR47 Par compliance P TA T Building 3, ology (Shangh rt 15C (2021) e with the req Prepared by: Techn No.145, Jin RF Applic FCC ID Produ Model Repo r Issue hai) Co., Ltd. ). The test res quirements as Xu Ying ology tang Rd, Tan TEL: +8 FAX: +86-0 F TES cant H D 2 ct S V rt No. R Date A tested the ab sults show th s documented y (Shan ngzhen Indus 86-021-50791 021-5079114 ST RE Honor De 2AYGCV Smart Ph VNE-LX3 R2207A0 August 2 bove equipme at the equipm d in this repor Approve nghai) stry Park, Pu 1141/2/3 41/2/3-8000 EPOR evice Co. VNE-LX3 hone 3 0619-R5V , 2022 ent in accorda ment tested is rt. d by: Xu Kai ) Co., L udong Shang RT , Ltd. V1 ance with the s capable of d Ltd. ghai, China e requirement demonstrating ts in FCC g RF Te TA Techno This report sh 1 Test 1.1 N 1.2. T 1.3 T 2 Gene 2.1 A 2.2 G 3 Appli 4 Inform 4.1 F 4.2 P 4.3 E 4.4 S 4.5 T 5 Test 5.1 P 5.2 O 5.3 F 5.4 T 5.5 B 5.6 N 5.7 S 5.8 U 5.9 C 6 Main ANNEX A ANNEX B est Report logy (Shangh hall not be repr Laboratory Notes of the Test facility Testing Loca eral Descrip Applicant an General info ied Standar mation abo Frequency H Pseudorand Equal Hoppi System Rec Test Configu Case Resu Peak Power Occupied Ba Frequency S Time of Occ Band Edge C Number of h Spurious RF Unwanted E Conducted E Test Instru A: The EUT A B: Test Setu hai) Co., Ltd. roduced except y ................. Test Repo r y ................. ation ........... ption of Equ nd Manufactu rmation ...... rds ............. out the FHS Hopping Sys om Frequen ng Frequen eiver Input B uration ........ lts .............. Output ...... andwidth (20 Separation .. upancy (D w Compliance hopping Freq F Conducted mission ..... Emission .... uments ....... Appearanc up Photos .. tin full, without TABLE ................... rt ................. ................... ................... uipment un urer Informa ................... ................... S characte stem Require ncy Hopping cy Use ....... Bandwidth .. ................... ................... ................... 0dB) ............ ................... well Time) ..... .................. quency ........ d Emissions . ................... ................... ................... e ................ ................... TA-MB-04 t the written ap E OF CO ................... ................... ................... ................... der Test .... ation............ ................... ................... ristics ........ ement......... g Sequence . ................... ................... ................... ................... ................... ................... ................... ................... ................... ................... ................... ................... ................... ................... ................... ................... -004R pproval of TA Te NTENT .................. .................. .................. .................. .................. .................. .................. .................. .................. .................. .................. .................. .................. .................. .................. .................. .................. .................. .................. .................. .................. .................. .................. .................. .................. .................. .................. Report No echnology (Shan .................. .................. .................. .................. .................. .................. .................. .................. .................. .................. .................. .................. .................. .................. .................. .................. .................. .................. .................. .................. .................. .................. .................. .................. .................. .................. .................. o.: R2207A0619 Pa nghai) Co., Ltd. ................... ................... ................... ................... ................... ................... ................... ................... ................... ................... ................... ................... ................... ................... ................... ................... ................... ................... ................... ................... ................... ................... ................... ................... ................... ................... ................... 9-R5V1 age 2 of 71 ................ 5 ................ 5 ................ 5 ................ 5 ................ 6 ................ 6 ................ 6 ................ 8 ................ 9 ................ 9 .............. 10 ............... 11 ............... 11 .............. 12 .............. 13 .............. 13 .............. 17 .............. 23 .............. 27 .............. 31 .............. 38 .............. 40 .............. 45 .............. 66 .............. 69 .............. 70 .............. 71 RF Te TA Techno This report sh Ve R R No the the est Report logy (Shangh hall not be repr ersion Rev Rev.0 Initi Rev.1 Upd ote: This rev e previously e previously hai) Co., Ltd. roduced except vision desc ial issue of r date informa ised report ( issued repo issued repo tin full, without cription report. ation. (Report No. ort (Report N ort and dispo TA-MB-04 t the written ap R2207A061 No. R2207A0 ose of it acc -004R pproval of TA Te 19-R5V1) su 0619-R5). P ordingly. Report No echnology (Shan J A upersedes a Please disca o.: R2207A0619 Pa nghai) Co., Ltd. Issue Date July 25, 202 August 2, 20 and replaces ard or destro 9-R5V1 age 3 of 71 e 22 22 s oy RF Te TA Techno This report sh Number 1 2 3 4 5 6 7 8 9 10 Date of Te Date of Sa Note: PAS FA All indicat Ltd. base d taken into est Report logy (Shangh hall not be repr Test Case Frequency Peak Pow Occupied Frequency Time of O Band Edg Number o Spurious Unwanted Conducte esting: July 9 ample Rece SS: The EUT IL: The EUT ions of Pass d on interpre o account an hai) Co., Ltd. roduced excep…

Text truncated - open the document above for the full version.

RF Test Setup Report No: R2207A0619 TA Technology (Shanghai) Co., Ltd. TA-MB-04-005R Page 1 of 3 This report shall not be reproduced except in full, without the written approval of TA Technology (Shanghai) Co., Ltd. Part15C Test Setup 9kHz-30MHz 30MHz-1GHz RF Test Setup Report No: R2207A0619 TA Technology (Shanghai) Co., Ltd. TA-MB-04-005R Page 2 of 3 This report shall not be reproduced except in full, without the written approval of TA Technology (Shanghai) Co., Ltd. 1GHz-18GHz 18GHz - 26.5GHz RF Test Setup Report No: R2207A0619 TA Technology (Shanghai) Co., Ltd. TA-MB-04-005R Page 3 of 3 This report shall not be reproduced except in full, without the written approval of TA Technology (Shanghai) Co., Ltd. 26.5GHz - 40GHz Picture 1 Radiated Emission Test Setup Picture 2 Conducted Emission Test Setup

TA Techno This report sh SAR Te SAR Test Rep ology (Shang hall not be repr est Setup port ghai) Co., Lt roduced except p Pict Pictu td. tin full, without ture 1: Left H ure 2: Left H TA-MB- t the written ap Hand Touch Hand Tilt 15 -04-003S pproval of TA Te Cheek Posi Degree Pos Repo echnology (Shan ition sition ort No.: R2207A Pa nghai) Co., Ltd. A0619 age 1 of 9 TA Techno This report sh SAR Test Rep ology (Shang hall not be repr port ghai) Co., Lt roduced except Pictu Pictu td. tin full, without ure 3: Right re 4: Right H TA-MB- t the written ap Hand Touch Hand Tilt 15 -04-003S pproval of TA Te h Cheek Pos Degree Pos Repo echnology (Shan sition sition ort No.: R2207A Pa nghai) Co., Ltd. A0619 age 2 of …

Text truncated - open the document above for the full version.