2AYL6-SH006SoulMic Bluetooth Headphones with Music Controls

蓝牙耳机说明书 SoulMic Bluetooth Headphones with Music Controls User manual 产品配置： 1. 工作电压：直流3.7V 2. 充电电压：DC5V 3. 频率范围：20HZ-20kHz 4. 充电时间：2.5小时 5. 播放时间：70%音量约36-40小时， 6. BT版本：5.4 7. 音频解码格式：SBC/AAC 8. 麦克风灵敏度：-32DB 9. 工作范围：10-15米 Specifications 1. Working voltage: DC 3.7V 2. Charging power: DC 5V 3. Frequency range:20HZ-20kHz 4. Charging time: 2.5 hrs 5. Playtime: 36-40hrs(70% Volume) 6. BT version: 5.4 7. Support format: SBC/AAC 8. Mic Sensitivity: -32db 9. Working range: 10-15 Ms 使用说明： 感谢您购买蓝牙耳机，请在使用本设备之前仔细阅读此手册。请保存手册以供进一步参考。 操作 将耳机电池完全充电，充电时，将USB充电线插入充电口，连接电源。充电时指示灯亮红 色，充电完毕后指示灯熄灭，充电约2.5小时。 当耳机电池用完时会听到默认语音提示请及时充电，后耳机会自动关闭。 Thank you for purchasing our wireless headphone. Please read the manual fully before using this device.Keep the manual for your further reference. Fully chargers the headphone battery for the first time using.To charge,insert the Charging Cable into the charging port and connect to a power source.When it is charging,the indicator will turn red.After it had finished charging,the charging indicator will turn off.It takes 2 hours to charge. When the headphone is running out of battery ,an alarm sound will be heard.Pls charge the battery immediately. 电源开/关 1. 开机：电源键拨到ON位置开机，然后指示灯红蓝对闪进入配对状态。 2. 关机：电源键拨到OFF位置关机，然后指示灯熄灭。 Power ON/OFF 1.Power on :Slide the power button to ON,then the indicator will glow red and blue. It is ready for wireless connection. 2.Power off:Slide the power button to OFF,then the indicator will turn off. 蓝牙使用 蓝牙模式提供了无线音乐播放的特点。 打开耳机时，指示灯发出蓝光和红光，打开手机上的蓝牙功能，搜索设备名：SoulMic Headphones。选择连接。成功连接后可以播放音乐并拨打电话。 当设备连接成功后，蓝色指示灯会长亮，当播放音乐时，蓝色指示灯会缓慢闪烁。 BLUETOOTH GUIDANCE Bluetooth mode offers the features of hands free function and wireless music player When you turn on the headphone, the indicator light glow blue and red,turn on the Bluetooth function on your phone,search the device name SoulMic Headphones and select it to connect.After successful connection,the blue indicator keep on ,it is flashing blue when playing music. 蓝牙模式 1. 接听/结束呼叫：来电时，按一下电话键接听，再按一下结束通话。 2. 打电话：当耳机处于蓝牙模式时，连按两下多功能键《播放/暂停》，拨打最后一个电话 号码。 3. 拒绝电话： 来电时长按电话键2秒，拒绝通话。 4. 播放音乐：按播放/暂停键播放音乐，再按一次停止播放音乐。短按加键下一曲 长按加音 量，短按减键上一曲 长按减音量。 Wireless Mode: 1.While the headphone connected to your cell phone , a call comes in ,Quick press the Phone button once to answer,press again to end the call. 2.To make a phone call While the headphone is connected to your cellphone , double short press the play/pause button to make a call which the last number you dial or answer list on your phone. 3.Reject a call Hold the phone button for 2 seconds and then release to reject the call. 4.Play/Pause music Short press the Play/pause button to Play / pause the music. Short press the (+)or(-) go the track you want to play with Long press the (+)or(-) button to obtain the volume level you want to be. 有线耳机功能 把3.5mm的音频线插到音频孔，再把音频线另一端插到计算机或其他音乐设备上，就可以 作为有线耳机来工作。当在有线耳机的情况下，蓝牙功能不能工作，无法通过耳机调整音量。 Wired headphone function: 1.To work as a wired headphone ,Plug the 3.5mm cable to ‘line in ’port and plug the other side to the computer or other music device then could work as a wired headphone. While in this function,Bluetooth function could not work. 警告：在充电时请不要使用耳机。 CAUTION: Do not use the headphone while under charging. 开机：关机状态下，将开机按键拔到ON，耳机自动开机 关机：开机状态下，将开机按键拔到OFF，耳机自动断开蓝牙，并关机。 语音控制功能（呼叫SIRI）：双击模式键（手机支持此功能） 复位：在开机状态下，同时长按“+”“-”键5秒恢复出厂设置。 1. Power on :Slide the power button to ON, the headphone turn on automatically 2. Power off: Slide the power button to OFF, then the headphone will turn off. 3. Voice assistant: Double short press the “M” button to activate Siri or voice assistant( only support the device with voice assistant function) 4. Re-set the headphone: turn on the phone, press the “+””-”the buttons at the same time to back to default mode. FCC Warning Statement Changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment. This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures: ‐‐ Reorient or relocate the receiving antenna. ‐‐ Increase the separation between the equipment and receiver. ‐‐ Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. ‐‐ Consult the dealer or an experienced radio/TV technician for help. FCC Radiation Exposure Statement The device has been evaluated to meet general RF exposure requirement. The device can be used in portable exposure condition without restriction. This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1)This device may not cause harmful interference, and (2)This device must accept any interference received, including interference that may cause undesired operation. ISED Canada Statement: This device contains licence-exempt transmitter(s)/receiver(s) that comply with Innovation, Science and Economic Development Canada's licence-exempt RSS(s). Operation is subject to the following two conditions: (1) This device may not cause interference. (2) This device must accept any interference, including interference that may cause undesired operation of the device. Radiation Exposure: This equipment complies with Canada radiation exposure limits set forth for an uncontrolled environment. IC Radiation Exposure Sta…

Text truncated - open the document above for the full version.

Shenzhen Moyoworld electronics Development Limited 2.911 (d)(5)(i) Equipment Type Attestation v1.2 Section 2.911(d)(5)(i) Certification – Equipment Type Company name: Shenzhen Moyoworld electronics Development Limited Address: 16th Floor, Building C6, HengFeng Industrial Park, No. 739 Zhou Shi Road, Bao’an District, Shenzhen, China Product Name: SoulMic Bluetooth Headphones with Music Controls FCC ID: 2AYL6-SH006 Model(s): SH006 7195-70, Y11S 2.911(d)(5)(i) Equipment Type We, [Shenzhen Moyoworld electronics Development Limited] (“the applicant”) certify that the equipment for which authorization is sought through certification is not:  Prohibited from receiving an equipment authorization pursuant to § 2.903; of the FCC rules.  Identified as an equipment type in the “Covered List” NOTE 1 Yours sincerely, Name: Sophia Yuan Date: 2024/6/13 Title and Company name: Manager / Shenzhen Moyoworld electronics Development Limited NOTE 1 “Covered List”; is the List of Equipment and Services Covered By Section 2 of The Secure Networks Act, available at https://www.fcc.gov/supplychain/coveredlist References; 1) 986446 D01 Covered Equipment v01 https://apps.fcc.gov/oetcf/kdb/forms/FTSSearchResultPage.cfm?switch=P&id=325672 2) Federal Register document 2022-28263 published on 02/06/23 https://www.federalregister.gov/documents/2023/02/06/2022-28263/protecting-against-national-security-threats-to-the-com munications-supply-chain-through-the

Shenzhen Moyoworld electronics Development Limited 2.911 (d)(5)(ii) Applicant Attestation v1.2 Section 2.911(d)(5)(ii) Certification – Applicant (Covered List ) Company name: Shenzhen Moyoworld electronics Development Limited Address: 16th Floor, Building C6, HengFeng Industrial Park, No. 739 Zhou Shi Road, Bao’an District, Shenzhen, China Product Name: SoulMic Bluetooth Headphones with Music Controls FCC ID: 2AYL6-SH006 Model(s): SH006 7195-70, Y11S 2.911(d)(5)(ii) Applicant filing We, [Shenzhen Moyoworld electronics Development Limited] (“the applicant”) certify that, as of the date of the filing of the application, the applicant is not identified NOTE 1 on the “Covered List” NOTE 2 , established pursuant to § 1.50002 of this chapter, as an entity producing covered communications equipment. Yours sincerely, Name: Sophia Yuan Date: 2024/6/13 Title and Company name: Manager / Shenzhen Moyoworld electronics Development Limited NOTE 1 Delete option not applicable to this application. NOTE 2 “Covered List”; is the List of Equipment and Services Covered By Section 2 of The Secure Networks Act, available at https://www.fcc.gov/supplychain/coveredlist References; 1) 986446 D01 Covered Equipment v01 https://apps.fcc.gov/oetcf/kdb/forms/FTSSearchResultPage.cfm?switch=P&id=325672 2) Federal Register document 2022-28263 published on 02/06/23 https://www.federalregister.gov/documents/2023/02/06/2022-28263/protecting-against-national-security-threats-to-the-com munications-supply-chain-through-the

Shenzhen Moyoworld electronics Development Limited Agent Authorization Company: Shenzhen Moyoworld electronics Development Limited Address: 16th Floor, Building C6, HengFeng Industrial Park, No. 739 Zhou Shi Road, Bao’an District, Shenzhen, China Product Name: SoulMic Bluetooth Headphones with Music Controls Model Number(s): SH006 7195-70, Y11S We authorize MiCOM Labs Inc., 575 Boulder Court, Pleasanton, California 94566, USA, to act on our behalf on all matters concerning the certification of above named equipment. We declare that MiCOM Labs Inc. is allowed to forward all information related to the approval and certification of equipment to the regulatory agencies as required and to discuss any issues concerning the approval application. Any and all acts carried out by MiCOM Labs on our behalf shall have the same effect as acts of our own. Name: Sophia Yuan Date: 2024/6/13 Title: Manager Signature of applicant:

Shenzhen Moyoworld electronics Development Limited Office of Engineering Technology Federal Communications Commission 7435 Oakland Mills Road Columbia, MD 21046 USA Date: 2024/6/13 Subject; Request for Confidentiality FCC ID: 2AYL6-SH006 To Whom It May Concern, Pursuant to the provisions of the Commission’s rules Title 47 Sections §0.457 and §0.459, we are requesting the Commission to withhold the following attachment(s) as confidential documents from public disclosure indefinitely. These documents contain detailed system and equipment descriptions and are considered as proprietary information in operation of the equipment. The public disclosure of these documents might be harmful to our company and would give competitors an unfair advantage in the market. Schematic Diagram Block Diagram Operational Description It is our understanding that all measurement test reports, FCC ID label format and correspondence during the certification review process cannot be granted as confidential documents and this information will be available for public review once the grant of equipment authorization is issued. Sincerely, Signature: Name: Sophia Yuan Title: Manager

Shenzhen Moyoworld electronics Development Limited Model Difference 2024/6/13 EUT NAME: SoulMic Bluetooth Headphones with Music Controls Trademark: N/A MODEL: SH006 7195-70, Y11S FCC ID: 2AYL6-SH006 All the models are the same circuit and RF module, except model names and appearance of the color. Regards Sincerely Client’s signature: Client’s name / title : Sophia Yuan / Manager Contact information / address: 16th Floor, Building C6, HengFeng Industrial Park, No. 739 Zhou Shi Road, Bao’an District, Shenzhen, China

External Photos

Label & label location Location: Label: SoulMic Bluetooth Headphones with Music Controls HVIN: SH006 IC: 31615-SH006 FCC ID: 2AYL6-SH006

Internal Photos Antenna

RF EXPOSURE EVALUATION METHOD FCC ID: 2AYL6-SH006 Applicable standard： In accordance with FCC 47 CFR part 2 (2.1093) this device has been defined as a portable device which is defined as a transmitting device designed to be used so that the radiating structure(s) of the device is/are within 20 centimeters of the body of the user. Portable devices must be evaluated using the specified in FCC 47 CFR part 2 (2.1093) and ANSI/IEEEC95.1-1992. and had been tested in accordance with the measurement methods and procedures specified in IEEE 1528-2003. Per FCC KDB 447498 D01 v06, the 1-g and 10-g SAR test exclusion thresholds for 100 MHz to 6 GHz at test separation distances s 50 mm are determined by: SAR Test Exclusion Thresholds for 100 MHz – 6 GHz and ≤ 50 mm Approximate SAR Test Exclusion Power Thresholds at Selected Frequencies and Test Separation Distances are illustrated in the following Table. The 1-g and 10-g SAR test exclusion thresholds for 100 MHz to 6 GHz at test separation distances ≤ 50 mm are determined by: [(max. power of channel, including tune-up tolerance, mW)/(min. test separation distance, mm)] · [√f(GHz)] ≤ 3.0 for 1-g SAR and ≤ 7.5 for 10-g extremity SAR,where f(GHz) is the RF channel transmit frequency in GHz Power and distance are rounded to the nearest mW and mm before calculation The result is rounded to one decimal place for comparison The test exclusions are applicable only when the minimum test separation distance is ≤ 50 mm and for transmission frequencies between 100 MHz and 6 GHz. When the minimum test separation distance is < 5 mm, a distance of 5 mm is applied to determine SAR test exclusion. Frequency Maximum Conducted Output Power(PK) Conducted Output Power Limit (MHz) (dBm) dBm GFSK 1Mbps 2402 3.03 30 2440 2.92 30 2480 2.22 30 GFSK 2Mbps 2402 3.10 30 2440 3.05 30 2480 2.36 30 max possible output power (PK,conducted)：3±1dBm 4dBm=2.51mW 2402MHz [(max. power of channel, including tune-up tolerance, mW)/(min. test separation distance,mm)] · [√f(GHz)]= 2.51/5*√2.402=0.778≤3.0 2440MHz [(max. power of channel, including tune-up tolerance, mW)/(min. test separation distance,mm)] · [√f(GHz)]= 2.51/5*√2.44=0.784≤3.0 2480MHz [(max. power of channel, including tune-up tolerance, mW)/(min. test separation distance,mm)] · [√f(GHz)]= 2.51/5*√2.48=0.791≤3.0 Conclusion: 1. [(max. power of channel, including tune-up tolerance, mW)/(min. test separation distance, mm)] * [√f(GHz)] < 3.0. 2. SAR Test Exclusion Thresholds is 3.0 for separation distance 5mm. Therefore, SAR test is not required.

Inverted F Antenna Specification Summary ITEM ANT SPEC Model Name 2.4G ANT Horizontal Vertical 2400MHz 2400MHz2500MHz2400MHz2400MHz 2500MHz Center Frequency -1.26dBi-0.76dBi-0.58dBi-5.25dBi-2.46dBi-1.86dBi MAX. Gain -0 .5 8dBi Polarization Horizontal and Vertical Azimuth Beam Pattern Omni-directional Impedance 50 Ohm Antenna Length 15 .20mm Manufacture ZHUHAI JIELI TECHNOLOGY CO.,LTD Antenna Photo & Length (mm) Horizontal: 2400 MHz 2450 MHz 2500 MHz Power (dBm) Max: 0 Min: -40 Scale: 5/div Gain(dB) Frequency (MHz) Max Min Avg 2400 -1.26174 -30.0801 -7.18716 2450 -0.765802 -36.5604 -7.48023 2500 -0.585582 -22.0315 -6.59127 Vertical: 2400 MHz 2450 MHz 2500 MHz Power (dBm) Max: 0 Min: -30 Scale: 5/div Gain(dB) Frequency (MHz) Max Min Avg 2400 -5.2537 -22.1424 -12.4294 2450 -2.4652 -24.5837 -10.4702 2500 -1.86120 -29.5214 -9.20432 ANT Test Labs：Attestation of Global Compliance Co., Ltd.

No.：BCTC/RF-EMC-005 Page: 1 of 85 Edition：B.2 TEST REPORT Shenzhen BCTC Testing Co., Ltd. Report No.: BCTC2405722779E Applicant: Shenzhen Moyoworld electronics Development Limited Product Name: SoulMic Bluetooth Headphones with Music Controls Test Model: SH006 Tested Date: 2024-05-21 to 2024-06-13 Issued Date: 2024-06-14 Report No.: BCTC2405722779E No.：BCTC/RF-EMC-005 Page: 2 of 85 Edition：B.2 FCC ID: 2AYL6-SH006 The test report is effective only with both signature and specialized stamp.This result(s) shown in this report refer only to the sample(s) tested. Without written approval of Shenzhen BCTC Testing Co., Ltd, this report can’t be reproduced except in full.The tested sample(s) and the sample information are provided by the client. Product Name: SoulMic Bluetooth Headphones with Music Controls Trademark: N/A Model/Type Reference: SH006 7195-70, Y11S Prepared For: Shenzhen Moyoworld electronics Development Limited Address: 16th Floor, Building C6, HengFeng Industrial Park, No. 739 Zhou Shi Road,Bao'an District, Shenzhen, China Manufacturer: Shenzhen Moyoworld electronics Development Limited Address: 16th Floor, Building C6, HengFeng Industrial Park, No. 739 Zhou Shi Road,Bao'an District, Shenzhen, China Prepared By: Shenzhen BCTC Testing Co., Ltd. Address: 1-2/F., Building B, Pengzhou Industrial Park, No.158, Fuyuan 1st Road, Zhancheng, Fuhai Subdistrict, Bao'an District, Shenzhen, Guangdong, China Sample Received Date: 2024-05-21 Sample Tested Date: 2024-05-21 to 2024-06-13 Issue Date: 2024-06-14 Report No.: BCTC2405722779E Test Standards: FCC Part15.247 ANSI C63.10-2013 Test Results: PASS Remark: This is Bluetooth Classic radio test report. Tested by: Approved by: Shanshan. Zhang / Project Handler Zero Zhou/Reviewer Report No.: BCTC2405722779E No.：BCTC/RF-EMC-005 Page: 3 of 85 Edition：B.2 Table Of Content Test Report Declaration Page 1. Version .................................................................................................................. 5 2. Test Summary ....................................................................................................... 6 3. Measurement Uncertainty ..................................................................................... 7 4. Product Information And Test Setup ..................................................................... 8 4.1 Product Information ............................................................................................... 8 4.2 Test Setup Configuration ...................................................................................... 9 4.3 Support Equipment ............................................................................................... 9 4.4 Channel List ........................................................................................................ 10 4.5 Test Mode ........................................................................................................... 10 4.6 Table Of Parameters Of Text Software Setting ................................................... 10 5. Test Facility And Test Instrument Used ............................................................... 11 5.1 Test Facility ......................................................................................................... 11 5.2 Test Instrument Used .......................................................................................... 11 6. Conducted Emissions .......................................................................................... 13 6.1 Block Diagram Of Test Setup .............................................................................. 13 6.2 Limit .................................................................................................................... 13 6.3 Test procedure .................................................................................................... 13 6.4 EUT operating Conditions ................................................................................... 13 6.5 Test Result .......................................................................................................... 14 7. Radiated emissions ............................................................................................. 16 7.1 Block Diagram Of Test Setup .............................................................................. 16 7.2 Limit .................................................................................................................... 17 7.3 Test procedure .................................................................................................... 18 7.4 EUT operating Conditions ................................................................................... 19 7.5 Test Result .......................................................................................................... 19 8. Radiated Band Emission Measurement And Restricted Bands Of Operation ..... 25 8.1 Block Diagram Of Test Setup .............................................................................. 25 8.2 Limit .................................................................................................................... 25 8.3 Test procedure .................................................................................................... 26 8.4 EUT operating Conditions ................................................................................... 26 8.5 Test Result .......................................................................................................... 27 9. Spurious RF Conducted Emissions ..................................................................... 28 9.1 Block Diagram Of Test Setup .............................................................................. 28 9.2 Limit .................................................................................................................... 28 9.3 Test procedure ....................................................................…

Text truncated - open the document above for the full version.

Conducted emissions Radiated Measurement Photos