2AYYS-ORPK4VTGonn. 4K Pro Streaming Device / Google TV

up to 30ftup to 30ft SETUP 1. Start Up TV 2. Set Input Source Of TV Turn on your TV before using Streaming Device. After your TV is turned on, go to the Inputs page where you can switch the input source. Select HDMI Input, e.g. HDMI1. Inputs Power on SAFETY INFORMATION WARNINGCAUTION SAFETY INFORMATION Cut line Fold line Copy safe area Outside bleed COMPLIANCE Manufactured under license from DoIby Laboratories. Dolby, Dolby Vision, Dolby Atmos, and the double-D symbol are registered trademarks of Dolby Laboratories Licensing Corporation. Google TV is the name of this device’s software experience and a trademark of Google LLC. Google, YouTube and Google Home are trademarks of Google LLC. Netflix is a trademark of Netflix, Inc. All brands contained herein are trademarks of their respective owners. The terms HDMI, HDMI High-Definition Multimedia Interface, HDMI trade dress and the HDMI Logos are trademarks or registered trademarks of HDMI Licensing Administrator, Inc. FRONT 3.75" 95.25mm 3.75" 95.25mm 1047.75mm COMPLIANCE FCC Statement This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures: • Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. • Consult the dealer or an experienced radio/TV technician for help. Battery Replacement Risks of explosion if the battery is replaced by an incorrect type: • replacement of a battery with an incorrect type that can defeat a safeguard (for example, in the case of some lithium battery types) • disposal of a battery into fire or a hot oven, or mechanically crushing or cutting of a battery, that can result in an explosion • leaving a battery in an extremely high temperature surrounding environment that can result in an explosion or the leakage of flammable liquid or gas • a battery subjected to extremely low air pressure that may result in an explosion or the leakage of flammable liquid or gas The Environment for Device • Appropriate Operating Temperature: 32°F to 104°F • Appropriate Operating Humidity: 5% ~ 85% Non-condensing • No parts should be repaired by users. • Place the device on a flat, firm and stable surface. Do not put it on a carpet or rug. • Protect the device from high temperatures, humidity, water and dust. • Do not mix old and new batteries and do not mix alkaline, standard (carbon-zinc) or rechargeable (ni-cd, ni-mh, etc.) batteries. • Do not place any objects near your device that may damage it (e.g. liquid-filled objects or candles). • Place the device in a well-ventilated location to prevent the accumulation of internal heat. • Presence of live parts inside the device! Do not open. Risk of electric shock! COMPLIANCE FCC Radiation Exposure Statement Any changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment. This device complies with FCC radiation exposure limits set forth for an uncontrolled environment. This equipment must be installed and operated in accordance with provided instructions and the antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons. This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: ( 1 ) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. No display after power on? • Confirm the HDMI cable is plugged in properly. • Make sure your TV has not entered sleep mode. Press the power button on the remote control to wake up your TV. TV has images but no sound? Make sure your TV is not in mute or low volume. Fail to connect to the network? Make sure Wi-Fi is functional and your box has a strong enough signal from your router. Remote control failure? • Replace the battery of the remote control with a new one, and make sure it is placed in the correct polarity. If hands-free voice control is not responding • Check network status. • Check the streaming device is on unmute state.(Microphone is switched on.) • Check the hands-free mode is activated in settings. (Settings > Accounts & Sign-in > Select Account > Google Assistant > Hands-free Mic) Please use the original accessories to ensure safety and a better experience. TROUBLESHOOTING onn. 4K Pro Streaming Device | Google TV QUICK START GUIDE 100135769 _EN_231222 WHAT’S INCLUDED Des criptionPicture 1Streaming Device x1 2Quick Start Guide x1 3Remote Control x1 4Batteries x2 5HDMI Cable x1 6Power Adapter x1 AAA AAA SETUP 5. Start Exploring Browse 700,000+ movies and TV episodes, plus live TV, from across your streaming services — in one place. Your Google TV experience is ready Start exploring 1. On the Google Home app: Install the Google Home app from your phone’s app store, then open the Google Home app and scan the QR code on the right side of TV. 2. On TV: Follow the on-screen setup. 4.3 Set up with the Google Home app or on the TV SETUP 4.2 Select language Follow the on-screen instructions to select your language and region. Set up with the Google Home app Set up on TV instead Setup code Welcome English (United States) English (Canada) Español (Estados Unidos) Select your region or …

Text truncated - open the document above for the full version.

Form: RFT-AMER-TCB-OP-19o Revision: 1 Page 1 of 1 Date: 1/25/2023 Luxshare Precision Industry Co.,Ltd. Attention: Application Examiner Re: Certification designating a U.S. agent for service of process pursuant to section 2.911(d)(7) of the FCC rules To whom it may concern, This letter is to confirm both [LUXSHARE-ICT, INC] (“Agent”) and Luxshare Precision Industry Co.,Ltd. (“Applicant”) acknowledge consent to obligations of each party pursuant to 47 CFR part § 2.911(d)(7) of the FCC rules in regard to the agent for service of process. I Luxshare Precision Industry Co.,Ltd. HEREBY CERTIFY THAT I am authorized to make the representations above on behalf of the Applicant. I further acknowledge the requirement to maintain an agent extends for no less than one year after the termination of all marketing and importation or the conclusion of and commission-related proceeding involving the equipment and agree to immediately notify the FCC and Intertek if there is any change in the status identified above. Applicant Company Name : Luxshare Precision Industry Co.,Ltd. Contact Name : Mr Bin Lin Address : Floor 2, Block A, Sanyo New Industrial Area, West Haoyi Community, Shajing Subdistrict Office, Bao an District Shenzhen, China Telephone No : +86 769 89089000 Email : [email protected] FCC ID : 2AYYS-ORPK4VTG Applicant FRN : 0030277669 Signature: Date: 2023/12/29 I [Kyle Liu] HEREBY CERTIFY THAT I am authorized to make the representations above on behalf of the Agent. I consent to the obligation to accept service of process on behalf of the applicant in regard to the FCC ID designated above. Agent Company Name : LUXSHARE-ICT,INC Contact Name : Mr Kyle Liu Address : 480N, Mc Carthy Blvd#280 Milpitas, CA95035 United states Telephone No : (408) 957-0535 59081 Email : [email protected] Agent FRN : 0033589201 Signature: Date: 2023/12/31

Form: RFT-AMER-TCB-OP-19m Revision: 1 Page 1 of 1 Date: 12/08/2022 Luxshare Precision Industry Co.,Ltd. Attention: Application Examiner Re: Covered List, located at https://www.fcc.gov/supplychain/coveredlist and Report & Order 22-84 located at https://docs.fcc.gov/public/attachments/DOC-389524A1.pdf Applicant: Luxshare Precision Industry Co.,Ltd. FCC ID: 2AYYS-ORPK4VTG To whom it may concern, Pursuant to FCC Report & Order 22-84 section IV. Interim Freeze Order, paragraphs 264, 265, and 266, as an authorized representative of Luxshare Precision Industry Co.,Ltd., I attest that the equipment for which we are seeking equipment authorization through certification is not prohibited from receiving an equipment authorization; and Luxshare Precision Industry Co.,Ltd. is not an entity identified on the Covered List or an affiliate or subsidiary of an entity identified on the Covered List, established pursuant to 47 CFR §1.50002. I HEREBY CERTIFY THAT I am authorized to make the representations above on behalf of the company and agree to immediately notify Intertek if there is any change in the status identified above. Bin Lin Product Design Engineer Luxshare Precision Industry Co.,Ltd.

Luxshare Precision Industry Co.,Ltd. [25 Dec. 2023] Federal Communications Commission 445 12 th Street SW Washington, DC 20554 Subject: Limited Agency Agreement (Luxshare Precision Industry Co.,Ltd.) FCC ID: 2AYYS-ORPK4VTG To Whom It May Concern: We, Luxshare Precision Industry Co.,Ltd., hereby authorized Intertek Testing Services to act as our Agent for the purpose of preparing application for FCC ID number 2AYYS-ORPK4VTG under all applicable parts of the FCC rules and regulations. The effective date of this limited agency agreement is (2023.12.25). The Limited Agency Agreement expires on (2024.12.15), unless sooner terminated or extended by written notice to Intertek Testing Services and the Federal Communications Commission. This is to advise that we are in full compliance with the Anti-Drug Abuse Act. The applicant is not subject to a denial of federal benefits pursuant to Section 5301 of the Anti-Drug Act of 1988, 21 U.S.C. 862, and no party to the application is subject to a denial of federal benefits pursuant to that section. If you have any questions or comments, please do not hesitate to contact me. Sincerely, Bin Lin Product Design Engineer

UNII Device Declaration Letter To whom it may concern, We have declared below featured for FCC equipment authorization, Device FCC ID: 2AYYS-ORPK4VTG (1) DFS Device: Master Client with Radar detection capability Client without Radar detection capability (2) Active/Passive Scanning, adhoc mode access point capability Frequency Band (MHz) Active Scanning (the device can transmit a probe(beacon)) Passive scanning (where the device can listen only with no probes) Ad Hoc Mode capability Access point capacility 2412-2462 Yes No Yes No Yes No Yes No 2422-2452 Yes No Yes No Yes No Yes No 5180-5240 Yes No Yes No Yes No Yes No 5190-5230 Yes No Yes No Yes No Yes No 5210-5210 Yes No Yes No Yes No Yes No 5260-5320 Yes No Yes No Yes No Yes No 5270-5310 Yes No Yes No Yes No Yes No 5290-5290 Yes No Yes No Yes No Yes No 5500-5580 Yes No Yes No Yes No Yes No 5510-5550 Yes No Yes No Yes No Yes No 5530-5530 Yes No Yes No Yes No Yes No 5660-5700 Yes No Yes No Yes No Yes No 5670-5670 Yes No Yes No Yes No Yes No 5745-5825 Yes No Yes No Yes No Yes No 5755-5795 Yes No Yes No Yes No Yes No 5775-5775 Yes No Yes No Yes No Yes No (3) Country code selection ability Yes No If yes, pls explain how it was implemented. (4) Meet 15.202 requirement Yes No Please check below: A master device is defined as a device operating in a mode in which it has the capability to transmit without receiving an enabling signal. In this mode it is able to select a channel and initiate a network by sending enabling signals to other devices. A client device is defined as a device operating in a mode in which the transmissions of the device are under the control of the master. A device in client mode is not able to initiate a network. (5) For client devices that have software configuration control to operate in different modes(active scanning in some and passive scanning in others) in different bands(devices with multiple equipment classes or those that operate on non-DFS frequencies) or modular devices which configure the modes of operations through software, the application must provide software and operations description on how the software and /or hardware is implemented to ensure that proper operations modes cannot be modified by end user or an installer. Apply Does not apply (If apply, pls help to provide explanation on it was implement, and how software was controlled) [Signature] Bin Lin Title Product Design Engineer

1(2) Luxshare Precision Industry Co.,Ltd. Attention: Certification reviewer RE: Request for Confidentiality FCC ID: 2AYYS-ORPK4VTG To Whom It May Concern: Permanent Confidentiality [Complete this section if permanent confidentiality is requested] Request to withhold permanently from public review certain portions of the application for equipment certification for the referenced FCC identifiers. This request for confidentiality is made pursuant to 47 CFR 0.457(d) and 0.459 of the FCC Rules. In particular, the following sections of the application are to be kept permanently confidential: [Select one or more of items below, as appropriate] Schematics Block Diagrams Operational Description Tune-up Procedure Parts List Internal Photos (see note) Users Manual (see note) Note 1: Internal Photos may be held confidential 1) if the circuit board or internal components are not accessible to users. For example, it is acceptable if the circuit board is enclosed in epoxy. 2) Also, it is acceptable if the device is not accessible to the public, for example, a device mounted on the top of a large tower (or in a fenced enclosure) such that it is only serviceable by professional designated technicians under a Non-Disclosure Agreement (NDA). All sales for these devices must be under a NDA restricting the disclosure of the propriety information, including internal photos. Users Manual may be held confidential only when the manual contains proprietary technical information intended for professional technicians obligated under a NDA. All sales and distribution of the user’s manual must be under a NDA that restricts the disclosure of the information. In the application cover letter requesting permanent confidentiality the following additional description and the NDA exhibit is required: 1. Describe in detail how internal photos and/or users manual information are controlled to prevent them from becoming public or disclosed to unauthorized persons. 2. Describe how public access is restricted for products serviceable by professional designated technicians. 3. A statement that all sales of the non-consumer device will be under a NDA to include third party sales and that the final user of the device is subject to the NDA. 4. Provide an example of the NDA between the grantee and a purchaser. The request for confidentiality must Note 2: For scanning receiver, the schematics, block diagrams, operational description, tune-up procedure, parts list and internal photos are always held permanently confidential. Short-term Confidentiality [Complete this section if short-term confidentiality is requested] Request to withhold from public review for a period of 180 days from the date of the Grant of Equipment Authorization and prior to marketing, certain portions of the application for equipment certification for the referenced FCC identifiers. This request for confidentiality is made pursuant to 47 CFR 0.457(d) and 0.459 of the FCC Rules. In particular, the following sections of the application are to be kept short-term confidential for a period above from the date of the grant [Select one or more of items below that are not selected in the list above, as appropriate] Schematics Block diagrams Operational Description Tune-up Procedure 2(2) Parts List Test Setup Photos External Photos Internal Photos Users Manual Rationale for request for confidentiality: We have invested considerable time and materials in research and development to produce the referenced product. Permanent confidentiality: Disclosure of the permanently confidential portions of this application to competitors would not only give them significant competitive advantages in developing similar products, but would also disclose successful implementation of unpublished, leading edge technology developed by us. Short-term confidentiality: Disclosure of the short-term confidential portions of this application during the period of importation and/or distribution would reveal key aspects of proprietary technology to competitors and diminish the value of our investment in research and development. If you have questions or need further information, please contact the undersigned. Sincerely, _________________ Bin Lin Product Design Engineer 2023-12-25

onn. 4K Pro Streaming Device | Google TV Made in Vietnam VSN: 100135769 FCC ID: 2AYYS-ORPK4VTG Input: 12.0V 1.5A 5026647 Conf. to UL STD.62368-1 Cert. to CSA STD. C22.2 No. 62368-1 Label ContentLabel Location S/N: XXXXXXXXXXXXXX

EMMC A: 2.4G WIFI&5G WIFI ANT BT ANT EMMC B:

INTERTEK TESTING SERVICES RF Exposure The equipment under test (EUT) is an onn. 4K Pro Streaming Device | Google TV with Bluetooth 5.2 (dual-mode) function operating in 2402-2480MHz, 2.4G WIFI function operating in 2412-2462MHz and 5G WIFI function operating in 5150MHz~5250 MHz, 5250MHz~5350MHz, 5470MHz-5725MHZ, 5725MHz~5850MHz. The EUT is powered by DC 12V from an adapter. For more detail information pls. refer to the user manual. EDR Bluetooth Version: 5.2 Antenna Type: Integral antenna. Antenna Gain: 2.68dBi. Modulation Type: GFSK, π/4DQPSK, 8DPSK. The nominal conducted output power specified: 8dBm (Tolerance: +/-3dB). The maximun conducted output power for the EUT is 10.89dBm in the frequency 2402MHz which is within the production variation. The minimum conducted output power for the EUT is 8.73dBm in the frequency 2440MHz which is within the production variation. According to FCC Part 2.1091, this unlicensed transmitting devices is categorically excluded from routine environmental evaluation for RF exposure prior to equipment authorization or use, According to the KDB 447498 and OET 65, the simple calculation as below: The source-based time averaged maximum radiated power = 11dBm +2.68dBi = 13.68dBm = 23.33mW From above data, the exposed power density at a distance (R) of 20cm from the center of radiation of the antenna for 2.4GHz band can be calculated according to OET 65 as follow: = 23.33mW/ 4πR^2 = 0.0046 mW/cm^2 <1mW/cm^2 The MPE limit is 1.0 mW/cm^2 for general population and uncontrolled exposure in the WIFI frequency range according to FCC Part 1.1310. As the measured power density at 20cm from the transmitter is lower than the MPE limit, the compliance to the MPE limit can be ensured by indicating the minimum 20cm separation between the transmitter's radiating structure and body of the user or nearby persons. FCC ID: 2AYYS-ORPK4VTG INTERTEK TESTING SERVICES BLE Bluetooth Version: 5.2 Antenna Type: Integral antenna. Antenna Gain: 2.68dBi. The nominal conducted output power specified: 8dBm (Tolerance: +/-3dB). The maximun conducted output power for the EUT is 8.18dBm in the frequency 2402MHz which is within the production variation. The minimum conducted output power for the EUT is 5.44dBm in the frequency 2440MHz which is within the production variation. According to FCC Part 2.1091, this unlicensed transmitting devices is categorically excluded from routine environmental evaluation for RF exposure prior to equipment authorization or use, According to the KDB 447498 and OET 65, the simple calculation as below: The source-based time averaged maximum radiated power = 11dBm +2.68dBi = 13.68dBm = 23.33mW From above data, the exposed power density at a distance (R) of 20cm from the center of radiation of the antenna for 2.4GHz band can be calculated according to OET 65 as follow: = 23.33mW/ 4πR^2 = 0.0046 mW/cm^2 <1mW/cm^2 The MPE limit is 1.0 mW/cm^2 for general population and uncontrolled exposure in the WIFI frequency range according to FCC Part 1.1310. As the measured power density at 20cm from the transmitter is lower than the MPE limit, the compliance to the MPE limit can be ensured by indicating the minimum 20cm separation between the transmitter's radiating structure and body of the user or nearby persons. FCC ID: 2AYYS-ORPK4VTG INTERTEK TESTING SERVICES 2.4GHz WiFi: Antenna Type: Integral Antenna. Antenna0 Gain: 2.76dBi. Antenna1 Gain: 2.61dBi. MIMO:5.70dBi Modulation Type: BPSK, QPSK, 16QAM, 64QAM, 256QAM, 1024QAM, CCK, DQPSK, DBPSK and DSSS. The nominal conducted output power specified: 21dBm (Tolerance: +/-7dB). The maximun conducted output power for the EUT is 27.3dBm in the frequency 2412MHz(IEEE 802.11n-HT20 ) which is within the production variation. The minimum conducted output power for the EUT is 15.1dBm in the frequency 2412MHz(IEEE 802.11b ) which is within the production variation. According to FCC Part 2.1091, this unlicensed transmitting devices is categorically excluded from routine environmental evaluation for RF exposure prior to equipment authorization or use, According to the KDB 447498 and OET 65, the simple calculation as below: The source-based time averaged maximum radiated power = 28dBm +5.70dBi = 33.70 dBm = 2344.23mW From above data, the exposed power density at a distance (R) of 20cm from the center of radiation of the antenna for 2.4GHz band can be calculated according to OET 65 as follow: = 2344.23mW/ 4πR^2 = 0.4666 mW/cm^2 <1mW/cm^2 The MPE limit is 1.0 mW/cm^2 for general population and uncontrolled exposure in the WIFI frequency range according to FCC Part 1.1310. As the measured power density at 20cm from the transmitter is lower than the MPE limit, the compliance to the MPE limit can be ensured by indicating the minimum 20cm separation between the transmitter's radiating structure and body of the user or nearby persons. FCC ID: 2AYYS-ORPK4VTG INTERTEK TESTING SERVICES 5GHz WiFi: Antenna Type: Integral Antenna. Antenna0 Gain: 1.91dBi. Antenna1 Gain: 2.63dBi. MIMO: 5.29dBi. Modulation Type: BPSK, QPSK, 16QAM, 64QAM, 256QAM,1024QAM, OFDM and OFDMA The nominal conducted output power specified: 15dBm (Tolerance: +/-5dB). The maximun conducted output power for the EUT is 18.85dBm in the frequency 5270MHz(IEEE 802.11n-HT40) which is within the production variation. The minimum conducted output power for the EUT is 10.83dBm in the frequency 5700MHz(IEEE 802.11ax-HE20 ) which is within the production variation. According to FCC Part 2.1091, this unlicensed transmitting devices is categorically excluded from routine environmental evaluation for RF exposure prior to equipment authorization or use, According to the KDB 447498 and OET 65, the simple calculation as below: The source-based time averaged maximum radiated power = 20dBm +5.29dBi = 25.29dBm =338.06mW From above data, the exposed power density at a distance (R) of 20cm from the center of radiation of the antenna for 2.4GHz band can be calculated according to OET 65 as follow: = 338.06mW/ 4…

Text truncated - open the document above for the full version.

Luxshare Precision Industry Co.,Ltd. TEST REPORT SCOPE OF WORK FCC TESTING – VSN: 100135769 REPORT NUMBER 231124002SZN-002 ISSUE DATE [REVISED DATE] 08 January 2024 [--------------------] PAGES 35 DOCUMENT CONTROL NUMBER FCC ID 247_b © 2017 INTERTEK Intertek Report No.: 231124002SZN-002 This report is for the exclusive use of Intertek's Client and is provided pursuant to the agreement between Intertek and its Client. Intertek's responsibility and liability are limited to the terms and conditions of the agreement. Intertek assumes no liability to any party, other than to the Client in accordance with the agreement, for any loss, expense or damage occasioned by the use of this report. Only the Client is authorized to permit copying or distribution of this report and then only in its entirety. Any use of the Intertek name or one of its marks for the sale or advertisement of the tested material, product or service must first be approved in writing by Intertek. The observations and test results in this report are relevant only to the sample tested. This report by itself does not imply that the material, product, or service is or has ever been under an Intertek certification program. Intertek Testing Services Shenzhen Ltd. Longhua Branch 101, 201, Building B, No. 308 Wuhe Avenue, Zhangkengjing Community, GuanHu Subdistrict, LongHua District, Shenzhen, P.R. China. Tel: (86 755) 8601 6288 Fax: (86 755) 8601 6751 Version: 01-November-2017 Page: 1 of 35 FCC ID 247_b TEST REPORT 101, 201, Building B, No. 308 Wuhe Avenue, Zhangkengjing Community, GuanHu Subdistrict, LongHua District, Shenzhen, P.R. China. Tel: (86 755) 8601 6288 Fax: (86 755) 8601 6751 www.intertek.com Luxshare Precision Industry Co.,Ltd. Application For Certification FCC ID: 2AYYS-ORPK4VTG onn. 4K Pro Streaming Device | Google TV Model: VSN: 100135769 Brand Name: onn. 2.4GHz Transceiver Report No.: 231124002SZN-002 We hereby certify that the sample of the above item is considered to comply with the requirements of FCC Part 15, Subpart C for Intentional Radiator, mention 47 CFR [10-1-21] Prepared and Checked by: Approved by: Allen Qin Peter Kang Engineer Sr. Technical Supervisor Date: 08 January 2024 TEST REPORT Intertek Report No.: 231124002SZN-002 Version: 01-November-2017 Page: 2 of 35 FCC ID 247_b MEASUREMENT/TECHNICAL REPORT This report concerns (check one) Original Grant X Class II Change Equipment Type: DTS - Part 15 Digital Transmission Systems (Wi-Fi transmitter portion) Deferred grant requested per 47 CFR 0.457(d)(1)(ii)? Yes No X If yes, defer until: date Company Name agrees to notify the Commission by: date of the intended date of announcement of the product so that the grant can be issued on that date. Transition Rules Request per 15.37? Yes No X If no, assumed Part 15, Subpart C for intentional radiator - the new 47 CFR [10-1-21] Edition] provision. Report prepared by: Allen Qin Intertek Testing Services Shenzhen Ltd. Longhua Branch 101, 201, Building B, No. 308 Wuhe Avenue, Zhangkengjing Community, GuanHu Subdistrict, LongHua District, Shenzhen, P.R. China. Tel: (86 755) 8614 0743 Fax: (86 755) 8601 6661 TEST REPORT Intertek Report No.: 231124002SZN-002 Version: 01-November-2017 Page: 3 of 35 FCC ID 247_b Table of Contents 1.0 Summary of Test results .............................................................................................. 4 2.0 General Description .................................................................................................... 5 2.1 Product Description ......................................................................................................... 5 2.2 Related Submittal(s) Grants ............................................................................................. 5 2.3 Test Methodology ............................................................................................................ 5 2.4 Test Facility ...................................................................................................................... 5 3.0 System Test Configuration ........................................................................................... 6 3.1 Justification ...................................................................................................................... 6 3.2 EUT Exercising Software ................................................................................................... 6 3.3 Special Accessories .......................................................................................................... 6 3.4 Measurement Uncertainty ............................................................................................... 7 3.5 Equipment Modification .................................................................................................. 7 3.6 Support Equipment List and Description ........................................................................ 7 4.0 Measurement Results ................................................................................................. 8 4.1 Maximum Conducted Output Power at Antenna Terminals ............................................... 8 4.2 Minimum 6 dB RF Bandwidth .......................................................................................... 9 4.3 Maximum Power Density Reading ................................................................................. 11 4.4 Out of Band Conducted Emissions ................................................................................. 13 4.5 Out of Band Radiated Emissions .................................................................................... 20 4.6 Transmitter Radiated Emissions in Restricted Bands ...................................................... 21 4.7 Field Strength Calculation .............................................................................................. 22 4.8 Radiated Spurious Emission ..............................................................................…

Text truncated - open the document above for the full version.

Luxshare Precision Industry Co.,Ltd. TEST REPORT SCOPE OF WORK FCC TESTING–VSN: 100135769 REPORT NUMBER 231124002SZN-003 ISSUE DATE [REVISED DATE] 08 January 2024 [--------------------] PAGES 34 DOCUMENT CONTROL NUMBER FCC ID 247_b © 2017 INTERTEK 101, 201, Building B, No. 308 Wuhe Avenue, Zhangkengjing Community, GuanHu Subdistrict, LongHua District, Shenzhen, P.R. China. Tel: (86 755) 8601 6288 Fax: (86 755) 8601 6751 www.intertek.com TEST REPORT Intertek Report No.: 231124002SZN-003 This report is for the exclusive use of Intertek's Client and is provided pursuant to the agreement between Intertek and its Client. Intertek's responsibility and liability are limited to the terms and conditions of the agreement. Intertek assumes no liability to any party, other than to the Client in accordance with the agreement, for any loss,…

Text truncated - open the document above for the full version.