2AZ4X-AB0368WIRELESS CHARGER

110 mm 90 mm90 mm90 mm 1. Do not expose this product to rain or damp conditions. 2. Prevent this ítem from falling as it could cause serious damage. 3. Do not dismantle, repair or modify this product by yourself, contact an authorized specialist. 4. In order to avoid any risk, do not dispose of this product inappropriately or throw it into the fire. 5. Clean it with a dry cloth. 6. Do not place this ítem near sources of heat or expose to direct sunlight. 7. Do not insert any metal ob jects into this device as there is a risk of causing a short circuit in the unit. 8. To avoid risk, do not place any metal objects between the charger and the mobile device during the charging process. 9. Do not use mobile devices with a metal case. 10. Keep out of reach of children. Product Overview: Charging area Indicator Light TYPE-C Instruction sheet TYPE-C Charging Cable 1 2 3 4 5 1. Connect the cable into a USB port or into a USB AC adapter. 2. Put your Qi compatible device on top of the wireless charger, ensuring that it is face up and centrally positioned. 3. When the wireless charge is working correctly a white light of the USB connector will light up. Note: If your phone has a protective case you may need to remove it for a successful connection when using the wireless charger. Operation: Warnings: Warning: Changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment. MADE IN CHINA Specifications: Input: 5V 2A, 9V 1. 67A Wireless Output: 5V 1A, 9V 1.1A Working distance: 6mm Working efficiency ≥63% Magnetic alignment suitable for compatible devices only. Compatible with Qi enabled devices Type-C Cord 11. Using your phone while charging it can cause higher temperatures. 12. Never store or use this product in temperatures below 32 (0 ) or above 115 (45 ) 17MM 10.8 MM 5 mm 5 mm 23.4 MM Bamboo 10W Wireless Charger with Phone Holder Item NO.: CTEK064 FCC Statement: Changes or modifications not expressly approved by the party responsible for compliance could void the user authority to operate the product. NOTE: This equipment has been tested and found to comply with the limits for a wireless power charger, pursuant to Part 18 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment o and on, the user is encouraged to try to correct the interference by one or more of the following measures: -Reorient or relocate the receiving antenna. -Increase the separation between the equipment and receiver. -Connect the equipment into an outlet on a circuit dierent from that to which the receiver is connected. -Consult the dealer or an experienced radio/TV technician for help.

DongguanLeaperElectronicTechnologyCO.,LTD AgentAuthorization Company:DongguanLeaperElectronicTechnologyCO.,LTD Address:NO.22,XinbaosecondStreet,Dalangnewtown,DongguanCity ProductName:WIRELESSCHARGER ModelNumber(s):AB0368 ProductDescription:WIRELESSCHARGER WeauthorizeMiCOMLabsInc.,575BoulderCourt,Pleasanton,California94566,USA, toactonourbehalfonallmattersconcerningthecertificationofabovenamed equipment. WedeclarethatMiCOMLabsInc.isallowedtoforwardallinformationrelatedtothe approvalandcertificationofequipmenttotheregulatoryagenciesasrequiredandto discussanyissuesconcerningtheapprovalapplication.Anyandallactscarriedoutby MiCOMLabsonourbehalfshallhavethesameeffectasactsofourown. Signature:Date:2022.11.16 Name: DEFANGCHEN Title: GeneralManage Company: DongguanLeaperElectronicTechnologyCO.,LTD

DongguanLeaperElectronicTechnologyCO.,LTD OfficeofEngineeringTechnology FederalCommunicationsCommission 7435OaklandMillsRoad Columbia,MD21046 USA Date:2022.11.16 Subject;RequestforConfidentiality FCCID:2AZ4X-AB0368 ToWhomItMayConcern, PursuanttotheprovisionsoftheCommission’srulesTitle47Sections§0.457and§0.459,we arerequestingtheCommissiontowithholdthefollowingattachment(s)asconfidential documentsfrompublicdisclosureindefinitely. Thesedocumentscontaindetailedsystemandequipmentdescriptionsandareconsideredas proprietaryinformationinoperationoftheequipment.Thepublicdisclosureofthesedocuments mightbeharmfultoourcompanyandwouldgivecompetitorsanunfairadvantageinthemarket. SchematicDiagram BlockDiagram PartsList OperationalDescription Tune-upProcedure Inadditionaltoabovementioneddocuments,inordertocomplywiththemarketingregulations inTitle47CFR§2.803andtheimportationrulesinTitle47CFR§2.1204,whileensuringthat businesssensitiveinformationremainsconfidentialuntiltheactualmarketingofnewly authorizeddevices,werequestShortTermConfidentialityofthefollowingattachment(s); ExternalPhotos TestSetupPhotos InternalPhotos UserManual For45days,pursuanttoPublicNoticeDA04-1705. OR For180dayspursuanttoKDB726920D01. Itisourunderstandingthatallmeasurementtestreports,FCCIDlabelformatand correspondenceduringthecertificationreviewprocesscannotbegrantedasconfidential documentsandthisinformationwillbeavailableforpublicreviewoncethegrantofequipment authorizationisissued. Sincerely, Signature: Name:DEFANGCHEN Title:GeneralManage

EUTPHOTO(ExternalPhotos)

black 63.5 mm 5 mm 25 mm 41.5 mm 91 mm 119 mm Item No.:AB0368 FCC ID:2AZ4X-A B0368 Input: 5V 2A, 9V 1.67A Wireless Output: 5V 1A, 9V 1.1A Lot No.: DP00045406 MADE IN CHINA 5 mm 5 mm Item No.:AB0368 FCC ID:2AZ4X-A B0368 Input: 5V 2A, 9V 1.67A Wireless Output: 5V 1A, 9V 1.1A Lot No.: DP00045406 M ADE IN CHINA 17MM 24.7 MM 10.8 MM

InternalPhotos CoilAntenna

FCC ID:2AZ4X-AB0368 RF Exposure Evaluation FCC ID: 2AZ4X-AB0368 Product Name: WIRELESS CHARGER Model Number: AB0368 Power Supply： Input: 5V/2A，9V/1.67A Wireless Output:5V/1A,9V/1.1A Frequency Range: 110-205 KHz Antenna Type: Coil Antenna Hardware versionV1.0 Software versionV1.0 Accessories Mobile phone: OPPO A96 Exposure category General population/uncontrolled environment EUT Type Production Unit Device Type Mobile Device 1 Measuring Standard KDB 680106 RF Exposure Wireless Charging Apps v03r01 2 Requirements According to the item 5 of KDB 680106 v03r01: Inductive wireless power transfer applications that meet all of the following requirements are excluded from submitting an RF exposure evaluation. (1) Power transfer frequency is less than 1MHz. (2) Output power from each primary coil is less than or equal to 15 watts. (3) The system may consist of more than one source primary coils, charging one or more clients. If more than one primary coil is present, the coil pairs may be powered on at the same time. (4) Client device is placed directly in contact with the transmitter. (5) Mobile exposure conditions only (portable exposure conditions are not covered by this exclusion). (6) The aggregate H-field strengths anywhere at or beyond 15 cm surrounding the device, and 20 cm away from the surface from all coils that by design can simultaneously transmit, and while those coils are simultaneously energized, are demonstrated to be less than 50% of the applicable MPE limit. Remark: Meet all the above requirements. Limits The criteria listed in the following table shall be used to evaluate the environment impact of human exposure to radio frequency (RF) radiation as specified in 1.1307(b) Limits for Maximum Permissible Exposure (MPE) 3 Test Setup 4 Test Procedure 1) The RF exposure test was performed in anechoic chamber. 2) The measurement probe was placed at test distance (15 cm fromall sidesand 20 cm from the top) which is between the edge of the charger and the geometric center of probe. 3) The highest emission level was recorded and compared with limit as soon as measurement of each points (A, B, C, D, E) were completed. 4) The EUT was measured according to the dictates of KDB 680106 v03r01. Remark：The EUT’s test position A, B, C, D and E is valid for the E and H field measurements. 5 Test Instruments list Test EquipmentManufacturerModel No.SN. Cal.Date (mm-dd-yy) Cal.Due date (mm-dd-yy) Exposure Level TesterNardaELT-400N-0231June. 25 2022June. 24 2023 Magnetic field probe 100cm 2 NardaELT probe 100cm 2 M0675June. 25 2022June. 24 2023 Isotrpic Electric field probe NardaEP-601611WX70332June. 25 2022June. 24 2023 6 Test Result For ≥95% Battery of phone E-Filed Strength at 15 cm from the edges surrounding the EUT (V/m) Frequency Range (MHz) Test Position A Test Position B Test Position C Test Position D Limits (V/m) 0.11-0.2051.451.461.241.23614 E-Filed Strength at 20 cm from the top of the EUT (V/m) Frequency Range (MHz) Test Position E Limits (V/m) 0.11-0.2051.01614 H-Filed Strength at 15 cm from the edges surrounding the EUT (A/m) Frequency Range (MHz) Test Position A Test Position B Test Position C Test Position D Limits (A/m) 0.11-0.2050.190.170.310.331.63 H-Filed Strength at 20 cm from the top of the EUT (A/m) Frequency Range (MHz) Test Position E Limits (A/m) 0.11-0.2050.141.63 For 50% Battery of phone E-Filed Strength at 15 cm from the edges surrounding the EUT (V/m) Frequency Range (MHz) Test Position A Test Position B Test Position C Test Position D Limits (V/m) 0.11-0.2052.392.362.212.25614 E-Filed Strength at 20 cm from the top of the EUT (V/m) Frequency Range (MHz) Test Position E Limits (V/m) 0.11-0.2052.09614 H-Filed Strength at 15 cm from the edges surrounding the EUT (A/m) Frequency Range (MHz) Test Position A Test Position B Test Position C Test Position D Limits (A/m) 0.11-0.2050.310.340.380.361.63 H-Filed Strength at 20 cm from the top of the EUT (A/m) Frequency Range (MHz) Test Position E Limits (A/m) 0.11-0.2050.251.63 For ≤5% Battery of phone E-Filed Strength at 15 cm from the edges surrounding the EUT (V/m) Frequency Range (MHz) Test Position A Test Position B Test Position C Test Position D Limits (V/m) 0.11-0.2052.862.892.942.96614 E-Filed Strength at 20 cm from the top of the EUT (V/m) Frequency Range (MHz) Test Position E Limits (V/m) 0.11-0.2052.46614 H-Filed Strength at 15 cm from the edges surrounding the EUT (A/m) Frequency Range (MHz) Test Position A Test Position B Test Position C Test Position D Limits (A/m) 0.11-0.2050.380.410.390.431.63 H-Filed Strength at 20 cm from the top of the EUT (A/m) Frequency Range (MHz) Test Position E Limits (A/m) 0.11-0.2050.321.63 7 Test Set-up Photo

ProjectNo.:ZKT-221108L8309E Page 1 of 18 FCCTESTREPORT FCCPart18 FCCID:2AZ4X-AB0368 ReportNumber. .................................. :ZKT-221108L8309E DateofTest ....................................................... : Nov.07,2022toNov.14,2022 Dateofissue.........................................: Nov.14,2022 Totalnumberofpages..........................19 TestResult..........................................: PASS TestingLaboratory............................:ShenzhenZKTTechnologyCo.,Ltd. Address ............................................... : 1/F,No.101,BuildingB,No.6,TangweiCommunityIndustrial Avenue,FuhaiStreet,Bao'anDistrict,Shenzhen,China Applicant'sname ............................. :DongguanLeaperElectronicTechnologyCO.,LTD Address...............................................: NO.22,XinbaosecondStreet,Dalangnewtown,DongguanCity Manufacturer'sname ...................... :DongguanLeaperElectronicTechnologyCO.,LTD Address ............................................... : NO.22,XinbaosecondStreet,Dalangnewtown,DongguanCity Testspecification: Standard ................................................ :FCCPart18 Testprocedure ...................................... : / Non-standardtestmethod ................ :N/A TestReportFormNo........................: TRF-EL-117_V0 TestReportForm(s)Originator.....: ZKTTesting MasterTRF........................................: Dated:2020-01-06 ThisdevicedescribedabovehasbeentestedbyZKT,andthetestresultsshowthattheequipmentunder test(EUT)isincompliancewiththeFCCrequirements.Anditisapplicableonlytothetestedsample identifiedinthereport. Thisreportshallnotbereproducedexceptinfull,withoutthewrittenapprovalofZKT,thisdocumentmay bealteredorrevisedbyZKT,personalonly,andshallbenotedintherevisionofthedocument. Productname.....................................:WIRELESSCHARGER Trademark ........................................... :N/A Model/Typereference.........................: AB0368 Ratings .................................................. : Input:5V/2A，9V/1.67A WirelessOutput:5V/1A,9V/1.1A ProjectNo.:ZKT-221108L8309E Page 2 of 18 Testingprocedureandtestinglocation: TestingLaboratory ....................................... :ShenzhenZKTTechnologyCo.,Ltd. Address ............................................................ : 1/F,No.101,BuildingB,No.6,TangweiCommunity IndustrialAvenue,FuhaiStreet,Bao'anDistrict, Shenzhen,China AlenHe Testedby(name+signature) ....................... : JoeLiu Reviewer(name+signature).......................: LakeXie Approved(name+signature).......................: ProjectNo.:ZKT-221108L8309E Page 3 of 18 TABLEOFCONTENT Page 1.VERSION.................................................................................................................................4 2.GENERALINFORMATION..................................................................................................5 2.1DescriptionofDevice(EUT)................................................................................................................5 2.2TestedSystemDetails..........................................................................................................................5 2.3TestFacility.............................................................................................................................................5 2.4MEASUREMENTUNCERTAINTY.....................................................................................................6 2.5TestInstrumentUsed............................................................................................................................6 3.CONDUCTEDEMISSIONATTHEMAINSTERMINALSTEST....................................7 3.1BlockDiagramOfTestSetup..............................................................................................................7 3.2TestStandard.........................................................................................................................................7 3.3PowerLineConductedEmissionLimit..............................................................................................7 3.4EUTConfigurationonTest...................................................................................................................7 3.5OperatingConditionofEUT................................................................................................................7 3.6TestProcedure.......................................................................................................................................7 3.7TestResult..............................................................................................................................................7 4.RADIATIONEMISSIONTEST...........................................................................................10 4.1BlockDiagramofTestSetup.............................................................................................................10 4.2TestStandard.......................................................................................................................................10 4.3RadiationLimit.....................................................................................................................................10 4.4EUTConfigurationonTest.................................................................................................................11 4.5OperatingConditionofEUT...............................................................................................................11 4.6TestProcedure.....................................................................................................................................11 4.7TestResult............................................................................................................................................12 5.EUTPHOTOGRAPHS.........................................................................................................16 6.EUTTESTPHOTOGRAPHS....…

Text truncated - open the document above for the full version.