2AZNY-TW720WIRELESS MICROPHONE

UHF Wireless Microphone Instruction Manual TW720 Thank you for purchasing TONOR wireless microphone. This manual is intended to help you understand all about this microphone and how to use it. TONOR always strives for the ultimate user experience. All our knowledge and passion for audio technology are incorpo- rated into building microphones with high performance for you. The TONOR microphone is high quality and easy to use to achieve the best user experience. Enjoy your microphone! TONOR Team ABOUT THIS MANUAL Package Including x2 -When using this device, keep it away from water. -Use the device in ventilated environment, keep it away from fire. -Since it's a wireless device, please keep it away from other interfering sources. -Don't take apart the device. -Please use the standard power supply, high voltage may damage the device. -When the battery is low, the mic or receiver will automatically shut down. Please charge it. -Recommended to use the original charging cable for all charging equipment. Or use a Type-A to Type-C charging cable. -Not recommended to use equipment while charging. OPERATING ENVIRONMENTS & NOTES SPECIFICATIONS 1. Frequency Range: 540-570MHz 2. Channels: 25ch/each channel 3. RF Power: 10dBm 4. Frequency Response: 50Hz-18kHz 5. T.H.D: ≤0.5% 6. Mic Battery: Lithium battery 3.7V/1200mAh 7. Mic Charging Time: 2-3 hours 8. Mic Battery Life: 7-9 hours 9. Receiver Battery: Lithium battery 3.7V/1500mAh 10. Receiver Charging Time; 2-3 hours 11. Receiver Battery Life: 7-9 hours 12. Working Distance: Up to 100m 1. LCD Display 2. Power Button with LED Indicator - Click to turn on. Long press for 2 seconds to turn off. - Click to be mute when it is power on. And the LED light is red. 3. LED Indicator - Power on state: Blue light means power on. Light off means mute. - Power off state: Red light means charging and light off when completed. - Power on state: Purple light means charging and red light means mute. MICROPHONE OPERATION INSTRUCTION 4 5 6 1 3 MHz MC1 558.9 4. TYPE-C Charging Interface 5. VOL: - Click to adjust the volume in U01 to U05 cycle. - Press and hold for 4 seconds to lock the microphones and the current receiver. At this time, the screen displays "----" to indicate successful locking. When using multiple sets, each set needs to be operated once. 6. SET - Click to adjust the frequency in CH01 to CH25 cycle. - Press and hold for 5 seconds to switch between MIC1/MIC2. Please ensure that the two microphones are MIC1 and MIC2 for normal use. DC 5V SETVOL 2 Turn on all the microphones, but one of them has on sound. Confirm that the two microphones are MIC1 and MIC2 respectively. If not, please press and hold the SET button for about 5 seconds to switch MIC1 and MIC2. Then wait for the microphone and receiver to connect automatically. Received signal with noise or interference Change to other frequencies. Check whether the receiving distance exceeds the maximum range. Microphone or receiver cannot be tumed on Check whether microphone or receiver is full charged. How to use multiple sets together a. Make sure all devices are turned off. b. Turn on the first set of receiver and microphone. c. Then press and hold the VOL button of MIC1 and MIC2 for 4 seconds to lock the microphones and receiver. The microphone screen displays "----" to indicate successful locking. d. Turn off the first set of microphones and receiver. e. Open the second set and repeat step 1 to step 4, and so on. f. After all set are locked, turn on multiple sets at the same time. Then click the SET button to set the unique frequency of each microphone. TROUBLESHOOTING TONOR provides 2 years of after-sales service, free replacement to products that are NOT damaged resulting from accident, alteration, misuse, negligence, or abuse. If exceeding 30 days of Amazon return policy, you can still contact us through our Shopify TONOR- MIC. We will serve you with full sincerity! WARRANTY EU Declaration of conformity • RoHS Directive (2011/65/EU) Hereby, Fujian EastWest Lifewit Technology Co.,LTD declares that the radio equipment type TW720 is in compliance with Directive 2014/53/EU. The full text of the EU declaration of conformity is available at the following internet address: https://www.tonormic.com/pages/eu-declaration-of-conformity Conditions and restrictions for using frequencies Conditions and restrictions for using frequencies There may be special conditions and restrictions for using frequencies in your country. Before putting the product into operation, find the information for your country at the following address: https://www.tonormic.com/pages/permitted-frequency-bands FCC Statement This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1)This device may not cause harmful interference. (2)This device must accept any interference received, including interference that may cause undesired operation. ISED Statement This device contains licence-exempt transmitter(s)/receiver(s) that comply with Innovation, Science and Economic Development Canada’s licence-exempt RSS(s). Operation is subject to the following two conditions: (1) This device may not cause interference. (2) This device must accept any interference, including interference that may cause undesired operation of the device. L’émetteur/récepteur exempt de licence contenu dans le présent appareil est conforme aux CNR d’Innovation, Sciences et Dévelop- pement économique Canada applicables aux appareils radio exempts de licence. L’exploitation est autorisée aux deux conditions suivantes: (1) L' appareil ne doit pas produire de brouillage; (2) L' appareil doit accepter tout brouillage radioélectrique subi, même si le brouillage est susceptible d' en compromettre le fonctionnement. CA FR US MX Changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment. NOTE: This equipment has been tested and found to comply with the …

Text truncated - open the document above for the full version.

Fujian EastWest Lifewit Technology Co.,LTD Federal Communications Commission Authorization and Evaluation Division Equipment Authorization Branch 7435 Oakland Mills Road Columbia, MD 21046 U.S. Agent Designatio 8/15/24 n Name and company of U.S. agent:EASTWEST ELECTRONIC COMMERCE CO US LIMITED Physical U.S. address of agent:3500 South Dupont Highway, Dover DE 19901 US FRN of U.S. agent:003360218 Fujian EastWest Lifewit Technology Co.,LTD acknowledges their consent for the following contact located in the United States to act as their agent for service of process for the equipment for which authorization is sought (FCC ID: 2AZNY-TW720): 6 Email address of U.S. agent:[email protected] EASTWEST ELECTRONIC COMMERCE CO US LIMITEDacknowledges their obligation to accept service of process on behalf ofFujian EastWest Lifewit Technology Co.,LTD. Fujian EastWest Lifewit Technology Co.,LTDwith the FRN0030816284ac cepts its obligation to maintain an agent for service of process in the United States for no less than one year after either the grantee has permanently terminated all marketing and importation of the applicable equipment within the U.S., or the conclusion of any Commission-related administrative or judicial proceeding involving the equipment, whichever is later. By signing this form, we confirm the above and that we are aware of the application requirements listed und er § 2.911(d)(7). The information provided in this letter is based on the referenced rule parts of Title 47 of the CFR as well as KDB 986446 D01. An expiration date for this letter does not exist. In case the U.S. agent changes, the grantee is obligated to notify the FCC within 30 days via the granting TCB. Sincerely, Signature YanbingLi ProductDirector FujianEastWestLifewitTechnologyCo.,LTD Signature XUEFANGTANG Director EASTWESTELECTRONICCOMMERCECOUS LIMITED 48_[model] US_Agent_2.911(d)(7)-U, V05

Page 1 of 5 FCC ID:2AZNY-TW720 Shenzhen LCS Compliance Testing Laboratory Ltd. Add: 101, 201 Bldg A & 301 Bldg C, Juji Industrial Park Yabianxueziwei, Shajing Street, Baoan District, Shenzhen, 518000, China Tel: +(86) 0755-82591330 | E-mail: [email protected] | Web: www.lcs-cert.com Scan code to check authenticity External Photos of the EUT Fig. 1 Fig. 2 Page 2 of 5 FCC ID:2AZNY-TW720 Shenzhen LCS Compliance Testing Laboratory Ltd. Add: 101, 201 Bldg A & 301 Bldg C, Juji Industrial Park Yabianxueziwei, Shajing Street, Baoan District, Shenzhen, 518000, China Tel: +(86) 0755-82591330 | E-mail: [email protected] | Web: www.lcs-cert.com Scan code to check authenticity Fig. 3 Fig. 4 Page 3 of 5 FCC ID:2AZNY-TW720 Shenzhen LCS Compliance Testing Laboratory Ltd. Add: 101, 201 Bldg A & 301 Bldg C, Juji Industrial Park Yabianxueziwei, Shajing Street, Baoan District, Shenzhen, 518000, China Tel: +(86) 0755-82591330 | E-mail: [email protected] | Web: www.lcs-cert.com Scan code to check authenticity Fig. 5 Fig. 6 Page 4 of 5 FCC ID:2AZNY-TW720 Shenzhen LCS Compliance Testing Laboratory Ltd. Add: 101, 201 Bldg A & 301 Bldg C, Juji Industrial Park Yabianxueziwei, Shajing Street, Baoan District, Shenzhen, 518000, China Tel: +(86) 0755-82591330 | E-mail: [email protected] | Web: www.lcs-cert.com Scan code to check authenticity Fig. 7 Fig. 8 Page 5 of 5 FCC ID:2AZNY-TW720 Shenzhen LCS Compliance Testing Laboratory Ltd. Add: 101, 201 Bldg A & 301 Bldg C, Juji Industrial Park Yabianxueziwei, Shajing Street, Baoan District, Shenzhen, 518000, China Tel: +(86) 0755-82591330 | E-mail: [email protected] | Web: www.lcs-cert.com Scan code to check authenticity Fig. 9 Fig. 10

Page 1 of 1 FCC ID: 2AZNY-TW720 IC: 30108-TW720 Shenzhen LCS Compliance Testing Laboratory Ltd. Add: 101, 201 Building A and 301 Building C, Juji Industrial Park, Yabianxueziwei Shajing Street, Baoan District, Shenzhen, 518000, P.R.C. Tel: +(86) 0755-82591330 | E-mail: [email protected] | Web: www.lcs-cert.com Scan code to check authenticity LABEL AND LOCATION Material: tagboard Glue: adhesive sticker Front color: White Label color: black (Size: L 4.0cm x W 2.0cm) WIRELESS MICROPHONE HVIN: TW720 FCC ID: 2AZNY-TW720 IC: 30108-TW720 W L Label Location

Page 1 of 5 FCC ID:2AZNY-TW720 Shenzhen LCS Compliance Testing Laboratory Ltd. Add: 101, 201 Bldg A & 301 Bldg C, Juji Industrial Park Yabianxueziwei, Shajing Street, Baoan District, Shenzhen, 518000, China Tel: +(86) 0755-82591330 | E-mail: [email protected] | Web: www.lcs-cert.com Scan code to check authenticity Internal Photos of the EUT Fig. 1 Fig. 2 Page 2 of 5 FCC ID:2AZNY-TW720 Shenzhen LCS Compliance Testing Laboratory Ltd. Add: 101, 201 Bldg A & 301 Bldg C, Juji Industrial Park Yabianxueziwei, Shajing Street, Baoan District, Shenzhen, 518000, China Tel: +(86) 0755-82591330 | E-mail: [email protected] | Web: www.lcs-cert.com Scan code to check authenticity Fig. 3 Fig. 4 Page 3 of 5 FCC ID:2AZNY-TW720 Shenzhen LCS Compliance Testing Laboratory Ltd. Add: 101, 201 Bldg A & 301 Bldg C, Juji Industrial Park Yabianxueziwei, Shajing Street, Baoan District, Shenzhen, 518000, China Tel: +(86) 0755-82591330 | E-mail: [email protected] | Web: www.lcs-cert.com Scan code to check authenticity Fig. 5 Fig. 6 Microphone ANT Page 4 of 5 FCC ID:2AZNY-TW720 Shenzhen LCS Compliance Testing Laboratory Ltd. Add: 101, 201 Bldg A & 301 Bldg C, Juji Industrial Park Yabianxueziwei, Shajing Street, Baoan District, Shenzhen, 518000, China Tel: +(86) 0755-82591330 | E-mail: [email protected] | Web: www.lcs-cert.com Scan code to check authenticity Fig. 7 Fig. 8 Page 5 of 5 FCC ID:2AZNY-TW720 Shenzhen LCS Compliance Testing Laboratory Ltd. Add: 101, 201 Bldg A & 301 Bldg C, Juji Industrial Park Yabianxueziwei, Shajing Street, Baoan District, Shenzhen, 518000, China Tel: +(86) 0755-82591330 | E-mail: [email protected] | Web: www.lcs-cert.com Scan code to check authenticity Fig. 9 Fig. 10

Page 1 of 2 FCC ID: 2AZNY-TW720 Shenzhen LCS Compliance Testing Laboratory Ltd. Add: 101, 201 Bldg A & 301 Bldg C, Juji Industrial Park Yabianxueziwei, Shajing Street, Baoan District, Shenzhen, 518000, China Tel: +(86) 0755-82591330 | E-mail: [email protected] | Web: www.lcs-cert.com Scan code to check authenticity FCC RF Exposure Evaluation 1. Product Information Product name WIRELESS MICROPHONE Test Model TW720 Additional Model No. TW721,TW722,TW730,TW732 Model Declaration PCB board, structure and internal of these model(s) are the same, So no additional models were tested Power supply Input: 5V400mA DC 3.7V by Rechargeable Li-ion Battery, 1200mAh Hardware Version CHG-M53TX.VER2.0 Software Version CHG-M53TX-DZ003-V3 Frequency Range 540MHz~570MHz Channel Number 50 channels Modulation Type FM Antenne Description Internal antenna, 3dBi (Max.) Exposure category General population/uncontrolled environment EUT Type Production Unit Device Type Portable Device 2. Evaluation method and Limit According to KDB447498 D01 General RF Exposure Guidance v06 Section 4.3.1 Standalone SAR test exclusion considerations: “Unless specifically required by the published RF exposure KDB procedures, standalone 1-g head or body and 10-g extremity SAR evaluation for general population exposure conditions, by measurement or numerical simulation, is not required when the corresponding SAR Test Exclusion Threshold condition, listed below, is satisfied. These test exclusion conditions are based on source-based time-averaged maximum conducted output power of the RF channel requiring evaluation, adjusted for tune-up tolerance, and the minimum test separation distance required for the exposure conditions.22 The minimum test separation distance is determined by the smallest distance from the antenna and radiating structures or outer surface of the device, according to the host form factor, exposure conditions and platform requirements, to any part of the body or extremity of a user or bystander (see 5) of section 4.1). To qualify for SAR test exclusion, the test separation distances applied must be fully explained and justified by the operating configurations and exposure conditions of the transmitter and applicable host platform requirements, typically in the SAR measurement or SAR analysis report, according to the required published RF exposure KDB procedures. When no other RF exposure testing or reporting is required, a statement of justification and compliance must be included in the equipment approval, in lieu of the SAR report, to qualify for the SAR test exclusion. When required, the device specific conditions described in the other published RF exposure KDB procedures must be satisfied before applying these SAR test exclusion provisions; for example, handheld PTT two-way radios, handsets, laptops & tablets etc.23 “ [(max. power of channel, including tune-up tolerance, mW)/ (min. test separation distance, mm)] · [√f (GHz)] ≤ 3.0 for 1-g SAR and ≤ 7.5 for 10-g extremity SAR, where: • f (GHz) is the RF channel transmit frequency in GHz • Power and distance are rounded to the nearest mW and mm before calculation • The result is rounded to one decimal place for comparison • 3.0 and 7.5 are referred to as the numeric thresholds in the step 2 below The test exclusions are applicable only when the minimum test separation distance is ≤ 50 mm and for transmission frequencies between 100 MHz and 6 GHz. When the minimum test Page 2 of 2 FCC ID: 2AZNY-TW720 Shenzhen LCS Compliance Testing Laboratory Ltd. Add: 101, 201 Bldg A & 301 Bldg C, Juji Industrial Park Yabianxueziwei, Shajing Street, Baoan District, Shenzhen, 518000, China Tel: +(86) 0755-82591330 | E-mail: [email protected] | Web: www.lcs-cert.com Scan code to check authenticity separation distance is < 5 mm, a distance of 5 mm according to f) in section 4.1 is applied to determine SAR test exclusion. 3. Refer evaluation method ANSI C95.1–1999: IEEE Standard for Safety Levels with Respect to Human Exposure to Radio Frequency Electromagnetic Fields, 3 kHz to 300 GHz. FCC KDB publication 447498 D01 General RF Exposure Guidance v06: Mobile and Portable Devices RF Exposure Procedures and Equipment Authorization Policies. FCC CFR 47 part1 1.1310: Radiofrequency radiation exposure limits. FCC CFR 47 part2 2.1093: Radiofrequency radiation exposure evaluation: portable devices 4. Conducted Power Results Test Mode Frequency (MHz) Measured Maximum Peak Power(dBm) Limits (dBm) Verdict FM 546.3 12.723 24 PASS FM 554.7 12.041 24 PASS FM 567.3 12.022 24 PASS 5. Manufacturing tolerance FM Channel(MHz) (Peak) Frequency 546.3 554.7 567.3 Target (dBm) 12.0 12.0 11.5 Tolerance ±(dB) 1.0 1.0 1.0 6. Evaluation Results Band/Mode f (GHz) Antenna Distance (mm) RF output power SAR Test Exclusion Threshold SAR Test Exclusion dBm mW FM 0.5463 5 13.0 19.9526 2.9495< 3.0 Yes FM 0.5547 5 13.0 19.9526 2.9721< 3.0 Yes FM 0.5673 5 12.5 19.9526 2.6788< 3.0 Yes Remark: 1. Output power including tune up tolerance; 2. When the minimum test separation distance is < 5 mm, a distance of 5 mm according to f) in section 4.1 of KDB447498 is applied to determine SAR test exclusion. 7. Conclusion The measurement results comply with the FCC Limit per 47 CFR 2.1093 for the uncontrolled RF Exposure and SAR Exclusion Threshold per KDB 447498 v06. .......................THE END OF REPORT.........................

TW720A/TW720B

Page 1 of 30 FCC ID:2AZNY-TW720 Report No.: LCSA06174140EA Shenzhen LCS Compliance Testing Laboratory Ltd. Add: 101, 201 Bldg A & 301 Bldg C, Juji Industrial Park Yabianxueziwei, Shajing Street, Baoan District, Shenzhen, 518000, China Tel: +(86) 0755-82591330 | E-mail: [email protected] | Web: www.lcs-cert.com Scan code to check authenticity FCC TEST REPORT For Fujian EastWest Lifewit Technology Co.,LTD WIRELESS MICROPHONE Test Model: TW720 Additional Model No.: Please Refer to Page 6 Prepared for : Fujian EastWest Lifewit Technology Co.,LTD Address : Rm 1201-1205, Bld 18, 2nd Phase of Innovation Park, no.7, Wulongjiang Mid-Ave, Fuzhou High-tech Zone, Fuzhou 350108, China Prepared by : Shenzhen LCS Compliance Testing Laboratory Ltd. Address : 101, 201 Bldg A & 301 Bldg C, Juji Industrial Park Yabianxueziwei, Shajing Street, Baoan District, Shenzhen, 518000, China Tel : (+86)755-82591330 Fax : (+86)755-82591332 Web : www.LCS-cert.com Mail : [email protected] Date of receipt of test sample : July 31, 2024 Number of tested samples : 2 Sample No : A240715162-1, A240715162-2 Serial number : Prototype Date of Test : July 31, 2024 ~ August 13, 2024 Date of Report : August 13, 2024 Page 2 of 30 FCC ID:2AZNY-TW720 Report No.: LCSA06174140EA Shenzhen LCS Compliance Testing Laboratory Ltd. Add: 101, 201 Bldg A & 301 Bldg C, Juji Industrial Park Yabianxueziwei, Shajing Street, Baoan District, Shenzhen, 518000, China Tel: +(86) 0755-82591330 | E-mail: [email protected] | Web: www.lcs-cert.com Scan code to check authenticity FCC TEST REPORT FCC CFR 47 PART 74 Report Reference No. ................. : LCSA06174140EA Date of Issue ................................... : August 13, 2024 Testing Laboratory Name ............. : Shenzhen LCS Compliance Testing Laboratory Ltd. Address ........................................... : 101, 201 Bldg A & 301 Bldg C, Juji Industrial Park Yabianxueziwei, Shajing Street, Baoan District, Shenzhen, 518000, China Testing Location/ Procedure ........... : Full application of Harmonised standards ■ Partial application of Harmonised standards □ Other standard testing method □ Applicant’s Name .......................... : Fujian EastWest Lifewit Technology Co.,LTD Address ........................................... : Rm 1201-1205, Bld 18, 2nd Phase of Innovation Park, no.7, Wulongjiang Mid-Ave, Fuzhou High-tech Zone, Fuzhou 350108, China Test Specification Standard .......................................... : FCC CFR 47 PART 74 Test Report Form No. ................... : TRF-4-E-165 A/0 TRF Originator ................................ : Shenzhen LCS Compliance Testing Laboratory Ltd. Master TRF ..................................... : Dated 2011-03 Shenzhen LCS Compliance Testing Laboratory Ltd. All rights reserved. This publication may be reproduced in whole or in part for non-commercial purposes as long as the Shenzhen LCS Compliance Testing Laboratory Ltd. is acknowledged as copyright owner and source of the material. Shenzhen LCS Compliance Testing Laboratory Ltd. takes no responsibility for and will not assume liability for damages resulting from the reader's interpretation of the reproduced material due to its placement and context. EUT Description. ........................... : WIRELESS MICROPHONE Trade Mark ...................................... : TONOR Test Model ..................................... : TW720 Ratings ............................................ : Input: 5V400mA DC 3.7V by Rechargeable Li-ion Battery, 1200mAh Result ............................................ : Positive Compiled by: Supervised by: Approved by: Jack Liu/ Administrator Cary Luo/ Technique principal Gavin Liang/ Manager Page 3 of 30 FCC ID:2AZNY-TW720 Report No.: LCSA06174140EA Shenzhen LCS Compliance Testing Laboratory Ltd. Add: 101, 201 Bldg A & 301 Bldg C, Juji Industrial Park Yabianxueziwei, Shajing Street, Baoan District, Shenzhen, 518000, China Tel: +(86) 0755-82591330 | E-mail: [email protected] | Web: www.lcs-cert.com Scan code to check authenticity FCC -- TEST REPORT Test Model........................... : TW720 EUT......................................... : WIRELESS MICROPHONE Applicant............................... : Fujian EastWest Lifewit Technology Co.,LTD Address.................................. : Rm 1201-1205, Bld 18, 2nd Phase of Innovation Park, no.7, Wulongjiang Mid-Ave, Fuzhou High-tech Zone, Fuzhou 350108, China Telephone............................... : / Fax.......................................... : / Manufacturer........................ : EASTWEST ELECTRONIC COMMERCE CO., LIMITED Address................................... : 6/F MANULIFE PLACE 348 KWUN TONG ROAD KL Telephone............................... : / Fax.......................................... : / Factory................................... : EASTWEST ELECTRONIC COMMERCE CO., LIMITED Address................................... : 6/F MANULIFE PLACE 348 KWUN TONG ROAD KL Telephone............................... : / Fax.......................................... : / Test Result Positive The test report merely corresponds to the test sample. It is not permitted to copy extracts of these test result without the written permission of the test laboratory. Test Report No. : LCSA06174140EA August 13, 2024 Date of issue Page 4 of 30 FCC ID:2AZNY-TW720 Report No.: LCSA06174140EA Shenzhen LCS Compliance Testing Laboratory Ltd. Add: 101, 201 Bldg A & 301 Bldg C, Juji Industrial Park Yabianxueziwei, Shajing Street, Baoan District, Shenzhen, 518000, China Tel: +(86) 0755-82591330 | E-mail: [email protected] | Web: www.lcs-cert.com Scan code to check authenticity Revision History Revision Issue Date Revision Content Revised By 000 August 13, 2024 Initial Issue -- Page 5 of 30 FCC ID:2AZNY-TW720 Report No.: LCSA06174140EA Shenzhen LCS Compliance Testing Laboratory Ltd. Add: 101, 201 Bldg A & 301 Bldg C, Juji Industrial Park Yabianxueziwei, Shajing Street, Baoan District, Shenzhen, 518000, China Tel: …

Text truncated - open the document above for the full version.

Page 1 of 1 FCC ID:2AZNY-TW720 Shenzhen LCS Compliance Testing Laboratory Ltd. Add: 101, 201 Bldg A & 301 Bldg C, Juji Industrial Park Yabianxueziwei, Shajing Street, Baoan District, Shenzhen, 518000, China Tel: +(86) 0755-82591330 | E-mail: [email protected] | Web: www.lcs-cert.com Scan code to check authenticity Test Setup Photos of the EUT Below 1GHz Above 1GHz