2AZWZ-S7CBaby Camera

Agent Authorization Company: KAWA ELECTRONICS COMPANY LIMITED Address: FLAT A 21/F CHEUNG LEE IND BLDG 9 CHEUNG LEE ST CHAI WAN HONG KONG, China Product Name: Baby Camera Model Number(s): S7-C, S7 Pro-C Product Description: Baby Camera We authorize MiCOM Labs Inc., 575 Boulder Court, Pleasanton, California 94566, USA, to act on our behalf on all matters concerning the certification of above named equipment. We declare that MiCOM Labs Inc. is allowed to forward all information related to the approval and certification of equipment to the regulatory agencies as required and to discuss any issues concerning the approval application. Any and all acts carried out by MiCOM Labs on our behalf shall have the same effect as acts of our own. Signature: Date: Apr. 15, 2022 Name: Yuwei Zhang Title: General Manager Company: KAWA ELECTRONICS COMPANY LIMITED

KAWA ELECTRONICS COMPANY LIMITED FLAT A 21/F CHEUNG LEE IND BLDG 9 CHEUNG LEE ST CHAI WAN HONG KONG, China Apr. 15, 2022 Office of Engineering Technology Federal Communications Commission 7435 Oakland Mills Road Columbia, MD 21046 USA Subject: Explanation of differences between product types FCC ID: 2AZWZ-S7C Models: S7-C, S7 Pro-C To Whom It May Concern: We, The KAWA ELECTRONICS COMPANY LIMITED hereby declare that the model: S7 Pro-C is identical with the model: S7-C, except the model name. Except for the different above, no other modification is performed. Sincerely, KAWA ELECTRONICS COMPANY LIMITED Signature: [Yuwei Zhang, General Manager]

Report No.: AGC01519220308AP02 Page 1 of 4 EXTERNAL PHOTOS All VIEW OF EUT TOP VIEW OF EUT Report No.: AGC01519220308AP02 Page 2 of 4 BOTTOM VIEW OF EUT FRONT VIEW OF EUT Report No.: AGC01519220308AP02 Page 3 of 4 BACK VIEW OF EUT LEFT VIEW OF EUT Report No.: AGC01519220308AP02 Page 4 of 4 RIGHT VIEW OF EUT ****************************************End of Report****************************************

Report No.: AGC01519220308AP02 Page 1 of 5 INTERNAL PHOTOS OPEN VIEW OF EUT (FIGURE 1) INTERNAL VIEW OF EUT (FIGURE 1) WIFI Antenna Report No.: AGC01519220308AP02 Page 2 of 5 INTERNAL VIEW OF EUT (FIGURE 2) INTERNAL VIEW OF EUT (FIGURE 3) Report No.: AGC01519220308AP02 Page 3 of 5 INTERNAL VIEW OF EUT (FIGURE 4) INTERNAL VIEW OF EUT (FIGURE 5) Report No.: AGC01519220308AP02 Page 4 of 5 INTERNAL VIEW OF EUT (FIGURE 6) INTERNAL VIEW OF EUT (FIGURE 7) Report No.: AGC01519220308AP02 Page 5 of 5 ANTENNA PORT VIEW OF EUT ****************************************End of Report****************************************

RF EXPOSURE EVALUATION 1. PRODUCT INFORMATION Product Description Baby Camera Test Model S7-C Series Model S7 Pro-C FCC ID 2AZWZ-S7C 2. EVALUATION METHOD AND LIMIT Human exposure to RF emissions from mobile devices (47 CFR §2.1091) may be evaluated based on the MPE limits adopted by the FCC for electric and magnetic field strength and/or power density, as appropriate, since exposures are assumed to occur at distances of 20 cm or more from persons. LIMITS FOR GENERAL POPULATION / UNCONTROLLED EXPOSURE Frequency Range (MHz) E-field Strength (E) (V/m) Magnetic Field Strength (H) (A/m) Power Density (S) (mW/cm 2 ) Averaging Time |E| 2 , |H| 2 or S (Minutes) 0.3 -- 1.34 614 1.63 (100)* 30 1.34 -- 30 824/f 2.19/f (180/f 2 )* 30 30 -- 300 27.5 0.073 0.2 30 300 -- 1500 -- -- f/1500 30 1500 -- 100,000 -- -- 1.0 30 *Note: 1. f= Frequency in MHz * Plane-wave Equivalent Power Density 2. The averaging time for General Population/Uncontrolled exposure to fixed transmitters is not applicable for mobile and portable transmitters. See 47 CFR §§2.1091 and 2.1093 on source-based time-averaging requirement for mobile and portable transmitters. S=PG/4πR² Where: S=power density P=power input to antenna G=power gain of the antenna in the direction of interest relative to an isotropic radiator R=distance to the center of radiation of the antenna CALCULATION A minimum test separation distance ≥ 20 cm is required between the antenna and radiating structures of the device and nearby persons to apply mobile device exposure limits. The distance must be at least 20 cm and fully supported by the operating and installation configurations of the transmitter and its antenna(s), according to the source-based time-averaged maximum power requirements of § 2.1091(d)(2). In cases where cable losses or other attenuations are applied to determine compliance, the most conservative operating configurations and exposure conditions must be evaluated. Antenna Gain=4.1dBi (Numeric 2.57), π=3.14 Note: 1. Only the worst case recorded. Frequency Output Power Output Power Power Density Power Density Limit MHz dBm mW mW/cm 2 mW/cm 2 2462 14.62 28.973 0.015 1

Page 1 of 80 FCC Test Report Report No.: AGC01519220308FE05 FCC ID : 2AZWZ-S7C APPLICATION PURPOSE : Original Equipment PRODUCT DESIGNATION : Baby Camera BRAND NAME : KAWA MODEL NAME : S7-C, S7 Pro-C APPLICANT : KAWA ELECTRONICS COMPANY LIMITED DATE OF ISSUE : Apr. 15, 2022 STANDARD(S) TEST PROCEDURE(S) : FCC Part 15.247 REPORT VERSION : V1.0 Attestation of Global Compliance (Shenzhen) Co., Ltd Report No.: AGC01519220308FE05 Page 2 of 80 REPORT REVISE RECORD Report Version Revise Time Issued Date Valid Version Notes V1.0 / Apr. 15, 2022 Valid Initial Release Report No.: AGC01519220308FE05 Page 3 of 80 TABLE OF CONTENTS 1. VERIFICATION OF CONFORMITY .................................................................................................................. 5 2. GENERAL INFORMATION .............................................................................................................................. 6 2.1. PRODUCT DESCRIPTION ........................................................................................................................ 6 2.2. TABLE OF CARRIER FREQUENCYS....................................................................................................... 7 2.3. IEEE 802.11N MODULATION SCHEME ................................................................................................... 7 2.4. RELATED SUBMITTAL(S) / GRANT (S) ................................................................................................... 8 2.5. TEST METHODOLOGY ............................................................................................................................. 8 2.6. SPECIAL ACCESSORIES ......................................................................................................................... 8 2.7. EQUIPMENT MODIFICATIONS ................................................................................................................ 8 2.8. ANTENNA REQUIREMENT ...................................................................................................................... 9 3. MEASUREMENT UNCERTAINTY ................................................................................................................. 10 4. DESCRIPTION OF TEST MODES ................................................................................................................. 11 5. SYSTEM TEST CONFIGURATION ................................................................................................................ 12 5.1. CONFIGURATION OF EUT SYSTEM ..................................................................................................... 12 5.2. EQUIPMENT USED IN EUT SYSTEM .................................................................................................... 12 5.3. SUMMARY OF TEST RESULTS ............................................................................................................. 12 6. TEST FACILITY .............................................................................................................................................. 13 7. OUTPUT POWER ........................................................................................................................................... 14 7.1. MEASUREMENT PROCEDURE ............................................................................................................. 14 7.2. TEST SET-UP (BLOCK DIAGRAM OF CONFIGURATION) ................................................................... 14 7.3. LIMITS AND MEASUREMENT RESULT ................................................................................................. 15 8. BANDWIDTH .................................................................................................................................................. 16 8.1. MEASUREMENT PROCEDURE ............................................................................................................. 16 8.2. TEST SET-UP (BLOCK DIAGRAM OF CONFIGURATION) ................................................................... 16 8.3. LIMITS AND MEASUREMENT RESULTS .............................................................................................. 17 9. CONDUCTED SPURIOUS EMISSION........................................................................................................... 24 9.1. MEASUREMENT PROCEDURE ............................................................................................................. 30 9.2. TEST SET-UP (BLOCK DIAGRAM OF CONFIGURATION) ................................................................... 30 9.3. MEASUREMENT EQUIPMENT USEDJN ............................................................................................... 30 9.4. LIMITS AND MEASUREMENT RESULT ................................................................................................. 30 10. MAXIMUM CONDUCTED OUTPUT POWER SPECTRAL DENSITY ........................................................ 45 10.1 MEASUREMENT PROCEDURE ............................................................................................................ 45 10.2 TEST SET-UP (BLOCK DIAGRAM OF CONFIGURATION) .................................................................. 45 Report No.: AGC01519220308FE05 Page 4 of 80 10.3 MEASUREMENT EQUIPMENT USED .................................................................................................. 45 10.4 LIMITS AND MEASUREMENT RESULT ................................................................................................ 45 11. RADIATED EMISSION ................................................................................................................................. 46 11.1. MEASUREMENT PROCEDURE ........................................................................................................... 52 11.2. TEST SETUP .............................................................................................................................…

Text truncated - open the document above for the full version.

Report No.: AGC01519220308FE05 Page 73 of 80 EUT Baby Camera Model Name S7-C Temperature 25°C Relative Humidity 60% Pressure 960hPa Test Voltage Normal Voltage Test Mode 802.11n40 with data rate 13.5 2422MHz Antenna Vertical Test Graph for Peak Measurement Test Graph for Average Measurement RESULT: PASS Report No.: AGC01519220308FE05 Page 74 of 80 EUT Baby Camera Model Name S7-C Temperature 25°C Relative Humidity 60% Pressure 960hPa Test Voltage Normal Voltage Test Mode 802.11n40 with data rate 13.5 2452MHz Antenna Horizontal Test Graph for Peak Measurement Test Graph for Average Measurement RESULT: PASS Report No.: AGC01519220308FE05 Page 75 of 80 EUT Baby Camera Model Name S7-C Temperature 25°C Relative Humidity 60% Pressure 960hPa Test Voltage Normal Voltage Test Mode 802.11n40 with data rate 13.5 2452MHz Antenna Vertical Test Graph for Peak Measurement Test Graph for Average Measurement RESULT: PASS Report No.: AGC01519220308FE05 Page 76 of 80 12. LINE CONDUCTED EMISSION TEST 12.1. LIMITS OF LINE CONDUCTED EMISSION TEST Frequency Maximum RF Line Voltage Q.P (dBμV) Average (dBμV) 150kHz~500kHz 66-56 56-46 500kHz~5MHz 56 46 5MHz~30MHz 60 50 Note: 1. The lower limit shall apply at the transition frequency. 2. The limit decreases linearly with the logarithm of the frequency in the range 0.15 MHz to 0.50 MHz. 12.2. BLOCK DIAGRAM OF LINE CONDUCTED EMISSION TEST EUT & Support Units Report No.: AGC01519220308FE05 Page 77 of 80 12.3. PRELIMINARY PROCEDURE OF LINE CONDUCTED EMISSION TEST 1. The equipment was set up as per the test configuration to simulate typical actual usage per the user’s manual. When the EUT is a tabletop system, a wooden table with a height of 0.8 meters is used and is placed on the ground plane as per ANSI C63.10 (see Test Facility for the dimensions of the ground plane used). When the EUT is a floor-standing equipment, it is placed on the ground plane which has a 3-12 mm non-conductive covering to insulate the EUT from the ground plane. 2. Support equipment, if needed, was placed as per ANSI C63.10. 3. All I/O cables were positioned to simulate typical actual usage as per ANSI C63.10. 4. All support equipment received AC120V/60Hz power from a LISN, if any. 5. The EUT received DC 5V power from adapter which received AC120V/60Hz power from a LISN. 6. The test program was started. Emissions were measured on each current carrying line of the EUT using a spectrum Analyzer / Receiver connected to the LISN powering the EUT. The LISN has two monitoring points: Line 1 (Hot Side) and Line 2 (Neutral Side). Two scans were taken: one with Line 1 connected to Analyzer / Receiver and Line 2 connected to a 50 Ohm load; the second scan had Line 1 connected to a 50 Ohm load and Line 2 connected to the Analyzer / Receiver. 7. Analyzer / Receiver scanned from 150 kHz to 30MHz for emissions in each of the test modes. 8. During the above scans, the emissions were maximized by cable manipulation. 9. The test mode(s) were scanned during the preliminary test. Then, the EUT configuration and cable configuration of the above highest emission level were recorded for reference of final testing. 12.4. FINAL PROCEDURE OF LINE CONDUCTED EMISSION TEST 1. EUT and support equipment was set up on the test bench as per step 2 of the preliminary test. 2. A scan was taken on both power lines, Line 1 and Line 2, recording at least the six highest emissions. Emission frequency and amplitude were recorded into a computer in which correction factors were used to calculate the emission level and compare reading to the applicable limit. If EUT emission level was less – 2dB to the A.V. limit in Peak mode, then the emission signal was re-checked using Q.P and Average detector. 3. The test data of the worst case was reported on the Summary Data page. Report No.: AGC01519220308FE05 Page 78 of 80 12.5. TEST RESULT OF LINE CONDUCTED EMISSION TEST Line Conducted Emission Test Line 1-L Report No.: AGC01519220308FE05 Page 79 of 80 Line Conducted Emission Test Line 2-N RESULT: PASS Report No.: AGC01519220308FE05 Page 80 of 80 APPENDIX A: PHOTOGRAPHS OF TEST SETUP Refer to the Report No.: AGC01519220308AP01 APPENDIX B: PHOTOGRAPHS OF EUT Refer to the Report No.: AGC01519220308AP02 ----END OF REPORT---- Conditions of Issuance of Test Reports 1. All samples and goods are accepted by the Attestation of Global Compliance (Shenzhen) Co., Ltd. (the “Company”) solely for testing and reporting in accordance with the following terms and conditions. The company provides its services on the basis that such terms and conditions constitute express agreement between the company and any person, firm or company requesting its services (the “Clients”). 2. Any report issued by Company as a result of this application for testing services (the “Report”) shall be issued in confidence to the Clients and the Report will be strictly treated as such by the Company. It may not be reproduced either in its entirety or in part and it may not be used for advertising or other unauthorized purposes without the written consent of the Company. The Clients to whom the Report is issued may, however, show or send it, or a certified copy thereof prepared by the Company to its customer, supplier or other persons directly concerned. The Company will not, without the consent of the Clients, enter into any discussion or correspondence with any third party concerning the contents of the Report, unless required by the relevant governmental authorities, laws or court orders. 3.The Company shall not be called or be liable to be called to give evidence or testimony on the Report in a court of law without its prior written consent, unless required by the relevant governmental authorities, laws or court orders. 4. In the event of the improper use of the report as determined by the Company, the Company reserves the right to withdraw it, and to adopt any other additional remedies which may be appropriate. 5. Samples submitted for testing are accepted on the understanding th…

Text truncated - open the document above for the full version.

Report No.: AGC01519220308AP01 Page 1 of 2 TEST SETUP PHOTOS RADIATED EMISSION TEST SETUP BELOW 1GHz RADIATED EMISSION TEST SETUP ABOVE 1GHz Report No.: AGC01519220308AP01 Page 2 of 2 AC POWER LINE CONDUCTED TEST SETUP RF CONDUCTED TEST SETUP ****************************************End of Report*************************************