2BAF6-CMR1007 Inch Car Multimedia System

7 Inch Car Multimedia System Model: CMR-710HD 1 2 5 4 3 1.【 】Back to home page 2.【 】Short press to step 1 to decrease volume, long press to step 5 to decrease volume 3.【 】Short press to step 1 to increase volume, long press to step 5 to increase volume 4.【 】Click to enter the APP interface 5.【 】The language assistant button is available on the Carplay interface and Android Auto interface. Click on other interfaces to enter the Bluetooth pairing interface Touch button function Click the[+- ]volume button on the panel to adjust the volume.The adjustment range is 0-39 Enter the current media source Enter the system settings interface Click to enter the home widget settings interface 3.1 Widget Settings Interface 1 2 4.APP Menu Android Auto Apple Carplay Enter Settings Enter Bluetooth Phone Enter Cameras Enter Media Enter Vehicle Info Enter Climate Enter Accessories Enter Gauges Enter Parking Sensors Enter Radar Detector 1.Widgets: Main interface widget setting interface, which can set the interface displayed by the two widgets on the left and right sides of the main interface 2.Background: set background 5.Media Menu Enter the Radio interface Click the [Media] icon on the APP interface to enter the media interface, or click the current media source on the main interface to enter the media interface, and then click to enter the media source selection interface. Enter the USB2 interface Enter AUX Enter HDMI Enter Apple CarPlay Enter Android Auto Enter Bluetooth Enter USB1 5.1 Radio Mode Click the [Radio] icon on the audio source selection interface to enter the recording interface 1 2 3 4 5 6 7 8 9 10 11 12 13 7 8 9 10 11 12 13 1.Enter the media audio source selection interface 2.Return to the previous interface 3.HDRadio album cover 10.Step down 9.Currently playing radio station 8.Enter the media settings interface 7.FM/AM switching 6.Flip up the list 5.Scan up the table 4.Step up 13.PlayList 12.Scroll down the list 11.Scan down the table Click on the 【Bluetooth 】 icon on the audio source selection interface to enter the Bluetooth music interface 5.2 Bluetooth Mode 1.1. On the main menu interface, click [Phone] or click the [Bluetooth] icon on the audio source selection interface to enter the Bluetooth pairing interface, or press the [Voice Key] on the panel to enter the Bluetooth pairing interface. 1.2. Users can initiate connection requests to paired remote devices through the car's infotainment system. If the remote device has pairing information with the car machine, it can also initiate a connection request to the car machine through the remote device. At this time, the car machine must be in a connectable state, o therwise it cannot be connected. You can search for Bluetooth devices within the valid range by operating the search device. 5.2.1 Bluetooth Operation 5.2.2 Bluetooth Music 3 4 5 6 1 2 7 89 1.Return to the previous interface 3.Enter the media settings interface 9.Next song 8.Play/Pause button 7.Previous song 6.Total duration of music playback 5.Music Information 4.CD Covers 2.Music played time 5.3 USB Mode Insert the USB device correctly into the USB port, and the system will automatically play music files from the USB. Click on the 'USB' icon on the audio source selection interface to enter the USB interface. If the USB device is not connected, a prompt "No USB" will pop up USB1(Type-A): Supports USB1.1/USB2.0 Support CarPlay Android Auto Connection Supports USB DRD Support USB firmware upgrade. USB2(Type-C): Supports USB1.1/USB2.0 Support mobile fast charging 2.5A (depending on the charging protocol of the phone) Support USB firmware upgrade 4 3 2 8 9 10 6 5 7 3.Enter the list interface 5 .CD Covers 4 .Enter the media settings interface 5.3.1 USB MUSIC Mode 1 1.Return to the previous interface 2 .Music played time 5.3.2 USB Video Mode In the USB mode interface, click on the list to enter the media source selection interface, click on the video, a list of video files will appear, and click on the video file to enter the playback mode. 1 2 4 5 6 3 3.Total video duration 1.Return to the previous interface 2.Video playback time 6.Next song 5.Play/Pause button 4.Previous song 7.Total duration of music playback 6.Music Information 10.Next song 9.Play/Pause button 8.Previous song 5.3.3 USB Picture Mode In the USB mode interface, click on the list to enter the media source selection interface, click on the image, a list of image files will appear, and click on the image file to enter the playback mode. 1 2 3 4 1.Return to the previous interface 4.Next picture 3.Play/Pause button 2.Previous picture The supported formats of USB files are as follows: Audio:MP3, MP2. WMA, AAC, FLAC, WVA, OGG Video:MPEG4, AVI, 3GP, FLV. RM/RMVB, VOB, MKV, TS Photo:JPEG, BMP, PNG It supports FAT32///Support USB/SD format FAT32 5.3.4 USB List Menu USB List Interface: This interface allows you to choose to play music, videos, or pictures from USB 5.4 AUX Menu Click on the 'AUX' icon on the audio source selection interface to enter the AUX interface 5.5 HDMI Menu Click on the 'HDMI' icon on the audio source selection interface to enter the HDMI interface Click on the icon on the media interface to enter the media settings interface 1 2 3 1.Media sound settings: Click to jump to the sound settings interface. 2.Bluetooth Settings: Click to jump to Bluetooth settings interface 3.HD radio switch: ON/OFF 5.6 Media settings interface 5.7 Apple Carplay Menu wired connection: The IOS phone is connected to this machine through a data cable, tap the Carplay icon on the main menu to enter into Carplay interface. wireless connection: In the Bluetooth connection interface, after connecting the phone to the car's B l u e t o o t h , t h e p h o n e w i l l a u t o m a t i c a l l y c o n n e c t t o t h e c a r ' s W i F i . A f t e r completing the Bluetooth and WIFI connection, click on the "Carplay" icon to enter the Carplay interface Support entering Carplay through USB cable or WIFI connection (wired and wireless) N…

Text truncated - open the document above for the full version.

Firstech, LLC * the applicant must designate a contact located in the United States for purposes of acting as the applicant’s agent for service of process, regardless of whether the applicant is a domestic or foreign entity. An applicant located in the United States may designate itself as the agent for service of process. U.S. Agent Designation for Service of Process - Certification Attestation Letter 8/18/2026 TO: Federal Communications Commission 7435 Oakland Mills Road Columbia, MD 21046 ATTN.: Reviewing Engineer FCC ID: 2BAF6-CMR100 FRN of applicant: 0033475344 Per section 2.911(d)(7) of the FCC rules, Firstech, LLC (“the applicant”) certifies that the equipment for which authorization is sought is designated to the following U.S. agent* for service of process: Company Name: Firstech, LLC FCC Registration Number (FRN): 0033475344 Physical U.S. Company Address: 21903 68th Ave. South, Kent, Washington, United States, 98032 Contact Person: Namwoo Kim Agent Email Address: [email protected] Telephone Number: 8888203690 The above contact person accepts the obligation for service of process. The applicant accepts to maintain an agent for no less than one year after the grantee has terminated all marketing and importation or the conclusion of any Commission-related proceeding involving the equipment. Applicant Signed: Agent Signed (if different from Applicant): Signed: Printed name: Namwoo Kim Title: Engineering Director Company Name: Firstech, LLC Date: 8/18/2026 Signed: Printed name: Title: Company Name: Date:

Firstech, LLC Covered Equipment Certification Attestation Letter 8/18/2026 Federal Communications Commission Authorization and Evaluation Division 7435 Oakland Mills Road Columbia, MD 21046 USA ATTN.: Reviewing Engineer FCC ID: 2BAF6-CMR100 Firstech, LLC (“the applicant”) certifies that the equipment for which authorization is sought is not “covered” equipment prohibited from receiving an equipment authorization pursuant to section 2.903 of the FCC rules. Note: If the equipment for which the applicant seeks authorization is produced by any of the entities identified on the current Covered List, the applicant should include an explanation on why the equipment is not “covered” equipment. Firstech, LLC (“the applicant”) certifies that, as of the date of the filing of the application, the applicant is not identified on the Covered List (as a specifically named entity or any of its subsidiaries or affiliates) as an entity producing “covered” equipment. Firstech, LLC (“the applicant”) certifies that the equipment for which authorization is sought does not include cybersecurity or anti-virus software produced or provided by Kaspersky Lab, Inc. or any of its successors and assignees, including equipment with integrated Kaspersky Lab, Inc. (or any of its successors and assignees) cybersecurity or anti-virus software pursuant to DA-24-886 and KDB 986446 D01 Covered Equipment Guidance section B(2a). Printed name: Namwoo Kim Title: Engineering Director Company Name: Firstech, LLC Date: 8/18/2026

Firstech, LLC Covered Equipment Certification Attestation Letter 8/18/2026 Federal Communications Commission Authorization and Evaluation Division 7435 Oakland Mills Road Columbia, MD 21046 USA ATTN.: Reviewing Engineer FCC ID: 2BAF6-CMR100 Firstech, LLC (“the applicant”) certifies that the equipment for which authorization is sought is not “covered” equipment prohibited from receiving an equipment authorization pursuant to section 2.903 of the FCC rules. Note: If the equipment for which the applicant seeks authorization is produced by any of the entities identified on the current Covered List, the applicant should include an explanation on why the equipment is not “covered” equipment. Firstech, LLC (“the applicant”) certifies that, as of the date of the filing of the application, the applicant is not identified on the Covered List (as a specifically named entity or any of its subsidiaries or affiliates) as an entity producing “covered” equipment. Firstech, LLC (“the applicant”) certifies that the equipment for which authorization is sought does not include cybersecurity or anti-virus software produced or provided by Kaspersky Lab, Inc. or any of its successors and assignees, including equipment with integrated Kaspersky Lab, Inc. (or any of its successors and assignees) cybersecurity or anti-virus software pursuant to DA-24-886 and KDB 986446 D01 Covered Equipment Guidance section B(2a). Printed name: Namwoo Kim Title: Engineering Director Company Name: Firstech, LLC Date: 8/18/2026

Firstech, LLC Office of Engineering Technology Federal Communications Commission 7435 Oakland Mills Road Columbia, MD 21046 USA Date: August 18, 2026 Subject; Request for Confidentiality FCC ID: 2BAF6-CMR100 To Whom It May Concern, Pursuant to the provisions of the Commission’s rules Title 47 Sections §0.457 and §0.459, we are requesting the Commission to withhold the following attachment(s) as confidential documents from public disclosure indefinitely. These documents contain detailed system and equipment descriptions and are considered as proprietary information in operation of the equipment. The public disclosure of these documents might be harmful to our company and would give competitors an unfair advantage in the market. Schematic Diagram Block Diagram Parts List Operational Description Tune-up Procedure Software Security In additional to above mentioned documents, in order to comply with the marketing regulations in Title 47 CFR §2.803 and the importation rules in Title 47 CFR §2.1204, while ensuring that business sensitive information remains confidential until the actual marketing of newly authorized devices, we request Short Term Confidentiality of the following attachment(s); External Photos Test Setup Photos Internal Photos User Manual For 45 days, pursuant to Public Notice DA 04-1705. OR For 180 days pursuant to KDB 726920 D01. It is our understanding that all measurement test reports, FCC ID label format and correspondence during the certification review process cannot be granted as confidential documents and this information will be available for public review once the grant of equipment authorization is issued. Sincerely, Signature: Name: Namwoo Kim Title: Engineering Director

Firstech, LLC Letter of Authorization Company: Firstech, LLC Address: 21903 68th Ave. South, Kent, Washington, United States, 98032 Product Name: 7 Inch Car Multimedia System Model Number(s): CMR-710HD Product Description: 7 Inch Car Multimedia System We authorize MiCOM Labs Inc., 575 Boulder Court, Pleasanton, California 94566, USA, to act on our behalf on all matters concerning the certification of above named equipment. We declare that MiCOM Labs Inc. is allowed to forward all information related to the approval and certification of equipment to the regulatory agencies as required and to discuss any issues concerning the approval application. Any and all acts carried out by MiCOM Labs on our behalf shall have the same effect as acts of our own. Date: August 18, 2026 Name: Namwoo Kim Title: Engineering Director Company: Firstech, LLC

FCC ID: 2BAF6-CMR100 FCC ID: 2BAF6-CMR100 FCC ID: 2BAF6-CMR100

MODEL: CMR-710HD | 7 INCH CAR MULTIMEDIA SYSTEM MADE IN CHINA SERIAL NO: THIS DEVICE COMPLIES WITH PART 15 OF THE FCC RULES. OPERATION IS SUBJECT TO THE FOLLOWING TWO CONDITIONS: (1) THIS DEVICE MAY NOT CAUSE HARMFUL INTERFERENCE, AND (2) THIS DEVICE MUST ACCEPT ANY INTERFERENCE RECEIVED, INCLUDING INTERFERENCE THAT MAY CAUSE UNDESIRED OPERATION. FCC ID : 2BAF6-CMR100 IC : 35423-2BAF6CRH1 XXXXXXXX DC: 12V NEGATIVE GROUND (FUSE 10 A)

Label Location

FCC ID: 2BAF6-CMR100 FCC ID: 2BAF6-CMR100 FCC ID: 2BAF6-CMR100 FCC ID: 2BAF6-CMR100 FCC ID: 2BAF6-CMR100 FCC ID: 2BAF6-CMR100 FCC ID: 2BAF6-CMR100 FCC ID: 2BAF6-CMR100 FCC ID: 2BAF6-CMR100 Antenna

SAR evaluation FCC ID: 2BAF6-CMR100 Test Standards The limit for Maximum Permissible Exposure (MPE) specified in FCC 1.1310 is followed. The gain of the antennas used in the product is extracted from the Antenna data sheets provided and also the maximum total power input to the antenna is measured. Through the Friis transmission formula and the maximum gain of the antenna, we can calculate the distance, away from the product, where the limit of MPE is reached. Although the Friis Transmission formula is far field assumption, the calculated result of that is an over-prediction for near field power density. It is taken as worst case to specify the safety range. Limit According to FCC 1.1310: The criteria listed in the following table shall be used to evaluate the environmental impact of the human exposure to radio-frequency (RF) radiation as specified in 1.1307 (b) Limits for Maximum Permissible Exposure (MPE) Frequency Range (MHz) Electric Field Strength (V/m) Magnetic Field Strength (A/m) Power Density (mW/cm²) Limits for Occupational / controlled Exposures 300 - 1500 -- -- f/300 3.0-30 1842/f 4.89/f *(900/f²) 1500 – 100000 -- -- 5.0 Limits for General population / Uncontrolled Exposure 300 - 1500 -- -- f/1500 1.34-30 824/f 2.19/f *(180f²) 1500 – 100000 -- -- 1.0 f= Frequency in MHz MPE Calculation Method E (V/m) = (30*P*G) 0.5 /d Power Density: Pd (W/m2) = E 2 /377 E = Electric Field (V/m) P = Peak RF output Power (W) G = EUT Antenna numeric gain (numeric) d = Separation distance between radiator and human body (m) The formula can be changed to Pd = (30*P*G) / (377*d 2 ) From the peak EUT RF output power, the minimum mobile separation distance, d=0.2m, as well as the gain of the used antenna, the RF power density can be obtained. Calculated WIFI Result and Limit (WORSE CASE IS AS BELOW) Antenna Gain (Numeric) Peak Output Power (mW) Power Density (S) (mW/cm2) Limit of Power Density (S) (mW/cm2) Test Result 2.31 （1.702） 44.26 （16.46dBm） 0.014986 1 Compiles Note: Antenna Gain: 2.31dBi (2.4G Band) ERP=16.46+2.31-2.15=16.62dBm(45.92mW) WIFI 2.4G band and 5G band cannot transmit Simultaneously Calculated Bluetooth Result and Limit (WORSE CASE IS AS BELOW) eirp = pt x gt = (EXd) 2 /30 where: pt = transmitter output power in watts, gt = numeric gain of the transmitting antenna (unitless), E = electric field strength in V/m, --- 10 ((dBuV/m)/20) /10 6 d = measurement distance in meters (m)---3m So pt = (EXd) 2 /(30 x gt) Ant gain =2.31dBi so Ant numeric gain= 1.702 Field strength =92.19dBμV/m @3m@2441MHz So Pt={[10 (92.19/20) /10 6 x3] 2 /(30x1.702)}x1000 mW = 0.2919mW Antenna Gain (Numeric) Peak Output Power (mW) Power Density (S) (mW/cm2) Limit of Power Density (S) (mW/cm2) Test Result 2.31（1.702） 0.2919（- 5.348dBm） 0.000099 1 Compiles Note: Antenna Gain: 2.31dBi (2.4G Band) ERP=2.31-5.348-2.15=-5.188 dBm(0.3028mW) 0.000099/1+0.014986/1=0.015085<1

Report No.: TW2503153-02E Applicant: Firstech, LLC Product: 7 Inch Car Multimedia System Model No.: CMR-710HD Trademark: Compustar Test Standards: FCC Part 15.247 Test Result: It is herewith confirmed and found to comply with the requirements set up by ANSI C63.10, FCC Part 15.247 for the evaluation of electromagnetic compatibility Approved By Terry Tang Manager Dated: June 11, 2025 Results appearing herein relate only to the sample tested The technical reports is issued errors and omissions exempt and is subject to withdrawal at SHENZHEN TIMEWAY TESTING LABORATORIES Zone C, 1st Floor, Block B, Jun Xiang Da Building, Zhongshan Park Road West, Tong Le Village, Nanshan District, Shenzhen, China Tel (755) 83448688, Fax (755) 83442996, E-Mail:[email protected] Report No.: TW2503153-02E Page 2 of 84 Date: 2025-06-11 The report refers only to the sample tested and does not apply to the bulk. This report is issued in confidence to the client and it will be strictly treated as such by the SHENZHEN TIMEWAY TESTING LABORATORIES. It may not be reproduced rather in its entirety or in part and it may not be used for adverting. The client to whom the report is issued may, however, show or send it . or a certified copy there of prepared by the SHENZHEN TIMEWAY TESTING LABORATORIES. to his customer. Supplier or others persons directly concerned. SHENZHEN TIMEWAY TESTING LABORATORIES. will not, without the consent of the client enter into any discussion of correspondence with any third party concerning the contents of the report. In the event of the improper use of the report. The SHENZHEN TIMEWAY TESTING LABORATORIES. reserves the rights to withdraw it and to adopt any other remedies which may be appropriate. Special Statement： FCC-Registration No.: 744189 The EMC Laboratory has been registered and fully described in a report filed with the (FCC) Federal Communications commission. The acceptance letter from the FCC is maintained in our files. Registration No.: 744189. ISED —Registration No.:5205A The EMC Laboratory has been registered by Certification and Engineering Bureau of ISED for radio equipment testing with Registration No.: 5205A. A2LA (Certification Number:5013.01) The EMC Laboratory has been accredited by the American Association for Laboratory Accreditation (A2LA). Certification Number:5013.01 CAB identifier: CN0033 FCC Designation Number: CN1251 Report No.: TW2503153-02E Page 3 of 84 Date: 2025-06-11 The report refers only to the sample tested and does not apply to the bulk. This report is issued in confidence to the client and it will be strictly treated as such by the SHENZHEN TIMEWAY TESTING LABORATORIES. It may not be reproduced rather in its entirety or in part and it may not be used for adverting. The client to whom the report is issued may, however, show or send it . or a certified copy there of prepared by the SHENZHEN TIMEWAY TESTING LABORATORIES. to his customer. Supplier or others persons directly concerned. SHENZHEN TIMEWAY TESTING LABORATORIES. will not, without the consent of the client enter into any discussion of correspondence with any third party concerning the contents of the report. In the event of the improper use of the report. The SHENZHEN TIMEWAY TESTING LABORATORIES. reserves the rights to withdraw it and to adopt any other remedies which may be appropriate. Test Report Conclusion Content 1.0 General Details ................................................................................................ 4 1.1 Test Lab Details................................................................................................ 4 1.2 Applicant Details............................................................................................... 4 1.3 Description of EUT ........................................................................................... 4 1.4 Submitted Sample.............................................................................................. 5 1.5 Test Duration................................................................................................... 5 1.6 Test Uncertainty............................................................................................... 5 1.7 Test By.......................................................................................................... 5 2.0 List of Measurement Equipment......................................................................... 6 3.0 Technical Details............................................................................................. 8 3.1 Summary of Test Results..................................................................................... 8 3.2 Test Standards.................................................................................................. 8 4.0 EUT Modification.............................................................................................8 5.0 Power Line Conducted Emission Test...................................................................... 9 5.1 Schematics of the Test........................................................................................ 9 5.2 Test Method and Test Procedure............................................................................ 9 5.3 Configuration of the EUT.................................................................................... 9 5.4 EUT Operating Condition....................................................................................10 5.5 Conducted Emission Limit................................................................................... 10 5.6 Test Result..................................................................................................... 10 6.0 Radiated Emission test...................................................................................... 11 6.1 Test Method and Test Procedure............................................................................ 11 6.2 Configuration of the EUT........................................…

Text truncated - open the document above for the full version.

GuangzhouGaokeZhongshiCommunication TechnologyCo.,Ltd.(GaokeAntCo.,Ltd.) Page1of9 Specification For Approval Customer： Supplier Jiangxi Province Xingzhi Cheng Electronics Co., Ltd. ： CustomerP/N GuangzhouGaokeZhongshiCommunicationTechnologyCo.,Ltd. ： Product Name : 2.4G & 5.8G built-in antenna Production number: GKZS-2.4G & 5.8G-P0311-RF1.13I-120 Supplierconfirmationandseal(SupplierSignature) EngineerReviewedandApprovedbyApprovedby: LiuGuangjinChaoXiaoxinHuZewei November25,2025November25,2025 November25,2025 Customerconfirmationstamp(CustomerSignature) EngineerReviewedandApprovedbyApprovedby: YTYTYTDDD Note: After the customer confirms and stamps the document, please return this acknowledgment letter to our company. GuangzhouGaokeZhongshiCommunicationTechnologyCo.,Ltd. Address:No.22GuangcongSouthRoad,Shengang,ConghuaDistrict,GuangzhouCity,GuangdongProvince,China Tel: 020-87080630/87080639/87080632 Fax: 020-87080731 http://www.gkzs.com.cn GuangzhouGaokeZhongshiCommunication TechnologyCo.,Ltd.(GaokeAntCo.,Ltd.) Page2of9 DescriptionRecord Version A/ ContentRevised Modifier Date 0InitialcreationHuMeijiao2025.11.25 GuangzhouGaokeZhongshiCommunication TechnologyCo.,Ltd.(GaokeAntCo.,Ltd.) Page3of9 I.ProductStructureDrawing(mm) markpositionChangeContenteditionSignature/Date examine and verify technology standardization ratify Sample Number Product Mo-del Ratio Unit:mm design Guangzhou High-Tech Zhongshi Communication Technology Co., Ltd. mixing GKZS-2.4&5.8G-P0311-RF1.13I-120 2.4 G&5.8 G built-in antenna PCBboard RF1. 13 line (black) IPEX (generation 1) 120±5 1 . 0 ± 0 . 5 GK-P0311-A0 3Madhes-ive hand-torn seat 30.8±0.5 1 0 . 6 ± 0 . 5 II.PhysicalProductImage Sample Name material weight surface preparation Third Perspective: Sample Number Product Model Ratiot VersionA / 0Pages 1 Guangzhou Gaoke Zhongshi Communication Technology Co., Ltd. (Gaoke Ant Co., Ltd.) Page 4 of 9 Design Specification III.AntennaTechnicalSpecifications sTypical PCB bui lt-in ant enn Antenna types a Working Frequency 2400-2500MHz 5158-5850MHz Gain 2 .31 dBi (peak) @ 2400–2500 MHz 3 .15 dBi (peak) @ 5158–5850 MHz ≥35 Antenna efficiency % ≤2. Voltage Standing Wave Ratio 5 Linear p olarizatio Polarization method n Omnidirectiona Radiation pattern l 50 Feeding impedance Ω 33dB Power Handling m IPEX ( Generation 1) / RF1.13 cable ( black), L = 120 m Antenna Interface m 30.8x10.6m Antenna dimensions m 0.9 Weight g -40~80 Operating temperature °C Comment / GuangzhouGaokeZhongshiCommunication TechnologyCo.,Ltd.(GaokeAntCo.,Ltd.) Page5of9 IV.WireParameters GuangzhouGaokeZhongshiCommunication TechnologyCo.,Ltd.(GaokeAntCo.,Ltd.) Page6of9 V.ConnectorParameters GuangzhouGaokeZhongshiCommunication TechnologyCo.,Ltd.(GaokeAntCo.,Ltd.) Page7of9 VI.AntennaPerformanceTesting(PrototypeTesting) 1、StandingWaveRatio 2、ReturnLoss、 GuangzhouGaokeZhongshiCommunication TechnologyCo.,Ltd.(GaokeAntCo.,Ltd.) Page8of9 2、DirectionalDiagram(2Dand3D) GuangzhouGaokeZhongshiCommunication TechnologyCo., Ltd. (GaokeAnt Co., Ltd.) Page 9 of 9 3、EfficiencyCurveChart

FCC ID: 2BAF6-CMR100 Radiated Emission Test Setup: FCC ID: 2BAF6-CMR100 RF test Setup: