2BB4N-TA01AVibe Tap

DETAILED SETUP Pair Vibe Tap with Vibe Board Connect Vibe Tap to your casting device Tap the button to start casting Plug Tap into either the USB-C 1 or USB-C 2 port on the back of the Vibe Board. Use the USB-C DisplayPort to connect the Tap with your casting device. When the Tap’s white light is on, tap the button to start casting. Once successfully paired, the Tap's light will turn white and stay on. You'll also see the prompt "Vibe Tap is paired now!" on your Vibe Board. A green light indicates that casting was successful . A red light indicates that casting has failed . Useful tips Pair Vibe Board directly via Bluetooth Plug Vibe Tap into your computer's USB-C port. Click "Pair" on the notification that pops up on your Vibe Board. If it vanishes, check system notifications. (Make sure Bluetooth is turn on.) Pair with other Vibe Boards. (Make sure Bluetooth is turn on.) Plug Tap into either USB-C 1 or USB-C 2 on the back of another Vibe Board. Once successfully paired, the Tap's light will turn white and stay on. You'll also see the prompt "Vibe Tap is paired now!" on the Vibe Board. Red Green USB-C 1 2 3 1 USB-C DisplayPort Laptop Desktop Mobile Tablet Vibe Tap Status Description Product Specifications Product dimensions 161mm*76mm*21mm Material Aluminum alloy+ABS+PC Video input interface USB-C (DisplayPort 1.2) Maximum input resolution 4K@30 FPS Bluetooth 2.4GHz 4.2 Encryption protocols WPA2-PSK Rated power consumption 5W Operating temperature -10°C to 50°C Light off Power off White flashing light Waiting to be paired White light on Connected and ready to cast Green light on Screencast success System ARM-v71 Master control performance Quad-core Cortex-A7 Maximum main frequency: 1.4GHz Audio Vibe-Cast Audio 16 bits 48kHz Wi-Fi band IEEE 802.11 b/g/n 2.4GHz IEEE 802.11 a/n/ac 5GHz Transmission distance 15m Touchback Support Rated power supply USB-C 5V 1A Storage temperature -20°C to 60°C Relative Humidity 5%~90% Red light on Screencast failed/No boards found This equipment has been tested and found to comply with the limits for a Class A digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference when the equipment is operated in a commercial environment. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instruction manual, may cause harmful interference to radio communications. Operation of this equipment in a residential area is likely to cause harmful interference in which case the user will be required to correct the interference at his own expense. Unauthorized changes or modifications could void the user’s authority to operate the equipment. This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. This device contains licence­exempt transmitter(s)/receiver(s) that comply with innovation, Science and Economic Development Canada's licence­exempt RSS(s). Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. Usage of this device is limited to indoor in the band 5150­5250 MHz Cet appareil contient un ou des émetteurs/récepteurs exemptés de licence conformes auxnormes RSS pour les dispositifs exempts de licence en matière d'Innovation, de Sciences et Développement économique. L'utilisation est soumise aux deux conditions suivantes: Cet appareil ne peut pas produire d’interférences. Cet appareil doit accepter toute interférence, y compris celles susceptibles de provoquer un fonctionnement non souhaité de l'appareil. L'utilisation de ce dispositif est limité à l'intérieur dans le 5150-5250MHz de bande Your mobile device is a radio transmitter and receiver. It is designed not to exceed the limits for exposure to radio waves (radio frequency electromagnetic fields) adopted by the Federal Communications Commission (FCC) and Canada (ISED). These limits include a substantial safety margin designed to assure the safety of all persons, regardless of age and health. The radio wave exposure guidelines use a unit of measurement known as the Specific Absorption Rate, or SAR. The SAR limit for mobile devices is 1.6W/kg. Tests for SAR are conducted using standard operating positions with the device transmitting at its highest certified power level in all tested frequency bands. The highest SAR values under the FCC and RSS guidelines for your device model are listed below: FCC/ISED 1g SAR: 0.4 W/kg. During use, the actual SAR values for your device are usually well below the values stated. This is because, for purposes of system efficiency and to minimize interference on the network, the operating power of your mobile device is automatically decreased when full power is not needed for the call. The lower the power output of the device, the lower its SAR value. If you are interested in further reducing your RF exposure then you can easily do so by limiting your usage or simply using a hands-free kit to keep the device away from the body.

SHENZHEN ZHOUGUANG TECHNOLOGY CO.LTD. * the applicant must designate a contact located in the United States for purposes of acting as the applicant’s agent for service of process, regardless of whether the applicant is a domestic or foreign entity. An applicant located in the United States may designate itself as the agent for service of process. U.S. Agent Designation for Service of Process - Certification Attestation Letter 10/20/2023 Federal Communications Commission Authorization and Evaluation Division 7435 Oakland Mills Road Columbia, MD 21046 USA ATTN.: Reviewing Engineer FCC ID: 2BB4N-TA01A FRN: 0034017541 Per section 2.911(d)(7) of the FCC rules, SHENZHEN ZHOUGUANG TECHNOLOGY CO.LTD. (“the applicant”) certifies that the equipment for which authorization is sought is designated to the following U.S. agent* for service of process: Company Name: JOC Australia Inc Physical U.S. Company Address: 18351 Colima Road Ste 585 Rowland Heights,California,91748 United States of America FCC Registration Number: 0033379421 Contact Person: Benjamin. Smith/ Vice President Agent Email Address: [email protected]/[email protected] Tel No.: +1(626) 341 3408 The above contact person accepts the obligation for service of process. The applicant accepts to maintain an agent for no less than one year after the grantee has terminated all marketing and importation or the conclusion of any Commission-related proceeding involving the equipment. Applicant Signed: Agent Signed (if different to Applicant): Printed name: Sophia Yang Printed name: Benjamin. Smith Title: Project manager Title: Vice President Company Name: SHENZHEN ZHOUGUANG TECHNOLOGY CO.LTD. Company Name: JOC Australia Inc Date: 10/17/2023 Date: 10/20/2023

SHENZHEN ZHOUGUANG TECHNOLOGY CO.LTD. Covered Equipment Certification Attestation Letter DATE Federal Communications Commission Authorization and Evaluation Division 7435 Oakland Mills Road Columbia, MD 21046 USA ATTN.: Reviewing Engineer FCC ID: 2BB4N-TA01A SHENZHEN ZHOUGUANG TECHNOLOGY CO.LTD.(“the applicant”) certifies that, as of the date of the filing of the application, the applicant is not identified on the Covered List as an entity producing “covered” equipment. <Signature> Name: Sophia Yang Title: Project manager Company: SHENZHEN ZHOUGUANG TECHNOLOGY CO.LTD.

SHENZHEN ZHOUGUANG TECHNOLOGY CO.LTD. Covered Equipment Certification Attestation Letter DATE Federal Communications Commission Authorization and Evaluation Division 7435 Oakland Mills Road Columbia, MD 21046 USA ATTN.: Reviewing Engineer FCC ID: 2BB4N-TA01A SHENZHEN ZHOUGUANG TECHNOLOGY CO.LTD. (“the applicant”) certifies that the equipment for which authorization is sought is not “covered” equipment prohibited from receiving an equipment authorization pursuant to section 2.903 of the FCC rules. Note: If the equipment for which the applicant seeks authorization is produced by any of the entities identified on the current Covered List, the applicant should include an explanation on why the equipment is not “covered” equipment. <Signature> Name: Sophia Yang Title: Project manager Company: SHENZHEN ZHOUGUANG TECHNOLOGY CO.LTD.

SHENZHEN ZHOUGUANG TECHNOLOGY CO.LTD. Equipment Autorisation Division Federal Communications Commission 7435 Oakland Mills Road Columbia, MD 21046 FCC ID: 2BB4N-TA01A Product Name: Vibe Tap Request for Confidentiality Pursuant to Sections 0.457 and 0.459 of the commissions rules, we hereby request that the following documents be held confidential: (List here the documents for which you are seeking confidentiality – for example ...)  Schematics  Block diagram  Operation description These materials contain trade secrets and proprietary information and are not customarily released to the public. The public disclosure of this information might be harmful to the company and provide unjustified benefits to our competitors. <Signature> Name: Sophia Yang Title: Project manager Company: SHENZHEN ZHOUGUANG TECHNOLOGY CO.LTD.

Date:2023.9.23 Federal Communications Commission Authorization & Evaluation Division 7345 Oakland Mills Road Columbia, Maryland 21046 RE: LETTER OF AGENT AUTHORIZATION To Whom It May Concern: We, the undersigned, hereby authorize Compliance Testing, LLC to act on our behalf in all matters relating to application for equipment authorization, including the signing of all documents relating to these matters. We also hereby certify that no party to the application authorized hereunder is subject to the denial of benefits, including FCC benefits, pursuant to Section 5301 of the Anti-Drug Abuse Act of 1988, 21 U.S.C.853(a). Sincerely, <Signature> Name: Tony Tang Title: EMC Engineer Company: EST Technology Co., Ltd.

SHENZHEN ZHOUGUANG TECHNOLOGY CO.LTD. Federal Communications Commission Authorization & Evaluation Division 7345 Oakland Mills Road Columbia, Maryland 21046 Authority to Act as Agent On our behalf, I appoint EST Technology Co., Ltd. Address: Chilingxiang, Qishantou, Santun, Houjie, Dongguan, Guangdong, China (Name of Agent company name and address) to act as our agent in the preparation of this application for equipment certification. I certify that submitted documents properly describe the device or system for which equipment certification is sought. I also certify that each unit manufactured, imported or marketed, as defined in the Federal Communications Commission’s regulations will have affixed to it a label identical to that submitted for approval with this application. For instances where our authorized agent signs the application for certification on our behalf, I acknowledge that all responsibility for complying with the terms and conditions for certification, still resides with SHENZHEN ZHOUGUANG TECHNOLOGY CO.LTD. Address: B401-p, longgang tian'an digital park, huanggekeng, community, longcheng street, longgang district, Shenzhen, Gugangdong, China. (Applicant Name and address) <Signature> Name: Sophia Yang Title: Project manager Company: SHENZHEN ZHOUGUANG TECHNOLOGY CO.LTD.

SHENZHEN ZHOUGUANG TECHNOLOGY CO.LTD. I, the signer, In addition to the model name, PCB Layout, components and component layout, all electrical construction and mechanical construction. They are identical except model name. Product Name: Vibe Tap Model Number: TA01A Additional Model: TA01B, TA01C, TA01D, TA0** (* can be A-Z, 0-9 or blank according to appearance, market) FCC ID：2BB4N-TA01A <Signature> Name: Sophia Yang Title: Project manager Company: SHENZHEN ZHOUGUANG TECHNOLOGY CO.LTD.

External Photos M/N: TA01A

按结构图纸(ACCORDING TO MECHANICAL DRAWING) 结构号： 4Q110-000442升级前的美工号： 按结构图纸(ACCORDING TO MECHANICAL DRAWING) 1:1 颜色(Colour) : 丝印内容见附件 尺寸(Size) : 比例(Scale) : 材料(Material): 4Q110-000647 4Q110-000451 下壳 TA01A 2023.09.13 TCL/CN R2 (Version) (Part No.) 物料编码 (Model No.) 型 号 (D a t e) 日 期 (Part Name) 物料名称 BOM(BOM No.): (Brand/Region): 电子/结构/认证 工程师审核规划/市场审批平面审核制作人 PREPARED BY:CHECKED BY:CHECKED BY:APPROVED BY: 陈庆耀 系统审签 系统审签系统审签 喷涂灰色Pantone cool gray 3U 文字白色丝印，以样板为准 下壳丝印去掉了 两边的certification和 IC后面的ID字符 须按图示方向制作 Pantone cool gray 3U TCL商用信息科技（惠州）有限责任公司 TCL Commercial Information Technology (Huizhou) Co., Ltd. 文字丝印内容 丝印白色 位置上下左右居中圆心 44.5mm 46.5mm 75.17mm 75.17mm 48.0mm 48.0mm

Internal Photos M/N: TA01A Internal Photos M/N: TA01A Internal Photos M/N: TA01A

Hotline: 400-6611-140 Tel: 86-755-27673339 Fax: 86-755-27673332 http://www.tct-lab.com SAR TEST REPORT FCC ID. ............................ : 2BB4N-TA01A Test Report No. ............... : TCT231024E014 Date of issue ................... : Oct. 27, 2023 Testing laboratory .......... : SHENZHEN TONGCE TESTING LAB Testing location/ address: 2101 & 2201, Zhenchang Factory Renshan Industrial Zone, Fuhai Subdistrict, Bao'an District, Shenzhen, Guangdong, 518103, People's Republic of China Applicant's name ............ : SHENZHEN ZHOUGUANG TECHNOLOGY CO.LTD. Address ........................... : B401-p, longgang tian'an digital park, huanggekeng, community, longcheng street, longgang district, Shenzhen, Gugangdong, China Manufacturer's name ... : SHENZHEN ZHOUGUANG TECHNOLOGY CO.LTD. Address ........................... : B401-p, longgang tian'an digital park, huanggekeng, community, longcheng street, longgang district, Shenzhen, Gugangdong, China Product Name ................. : Vibe Tap Trade Mark ...................... : N/A Model/Type reference..... : TA01A, TA01B, TA01C, TA01D, TA0**(* can be A-Z, 0-9 or blank according to appearance, market) SAR Max. Values..............: 0.40 W/Kg (1g) for Body-worn Simultaneous Reported SAR..................................: 0.53 W/Kg (1g) for Body-worn Date of receipt of test item ......................................... : Oct. 24, 2023 Date (s) of performance of test ................................... : Oct. 24, 2023- Oct. 27, 2023 Tested by (+signature) ... : Una LI Check by (+signature) .... : Beryl Zhao Approved by (+signature): Tomsin General disclaimer: This report shall not be reproduced except in full, without the written approval of SHENZHEN TONGCE TESTING LAB. This document may be altered or revised by SHENZHEN TONGCE TESTING LAB personnel only, and shall be noted in the revision section of the document. The test results in the report only apply to the tested sample. Report No.: TCT231024E014 Page 2 of 94 Hotline: 400-6611-140 Tel: 86-755-27673339 Fax: 86-755-27673332 http://www.tct-lab.com TABLE OF CONTENTS 1. General Product Information .................................................................. 4 1.1. EUT description ................................................................................................................................. 4 1.2. Model(s) list ....................................................................................................................................... 4 2. Test standard ........................................................................................... 5 3. Facilities and Accreditations .................................................................. 5 3.1. Facilities ............................................................................................................................................. 5 3.2. Location.............................................................................................................................................. 5 4. Test Result Summary .............................................................................. 6 5. RF Exposure Limit ................................................................................... 7 6. SAR Measurement System Configuration ............................................. 8 6.1. SAR Measurement Set-up ................................................................................................................ 8 6.2. E-field Probe ...................................................................................................................................... 9 6.3. Phantom ............................................................................................................................................. 9 6.4. Device Holder .................................................................................................................................. 10 6.5. Data Storage and Evaluation ......................................................................................................... 11 6.6. Position of the wireless device in relation to the phantom ........................................................ 12 6.7. Tissue Dielectric Parameters ......................................................................................................... 15 6.8. Tissue-equivalent Liquid Properties ............................................................................................. 16 6.9. System Check .................................................................................................................................. 17 7. Measurement Procedure ....................................................................... 18 8. Conducted Output Power ...................................................................... 21 9. Exposure Position Consideration ........................................................ 24 9.1. EUT Antenna Location .................................................................................................................... 24 9.2. Test Position Consideration .......................................................................................................... 24 10. SAR Test Results Summary .................................................................. 25 10.1. Body-Worn 1g SAR Data ................................................................................................................ 25 10.2. Simultaneous Transmission Conclusion...................................................................................... 27 10.3. SAR Simultaneous Transmission Analysis .................................................................................. 28 10.4. Measurement Uncertainty (450MHz-3GHz) ................................................................................... 29 10.5. Test Equipment List ...................................................................................................................…

Text truncated - open the document above for the full version.

Report No.: TCT231024E014 Page 74 of 94 Hotline: 400-6611-140 Tel: 86-755-27673339 Fax: 86-755-27673332 http://www.tct-lab.com Report No.: TCT231024E014 Page 75 of 94 Hotline: 400-6611-140 Tel: 86-755-27673339 Fax: 86-755-27673332 http://www.tct-lab.com Report No.: TCT231024E014 Page 76 of 94 Hotline: 400-6611-140 Tel: 86-755-27673339 Fax: 86-755-27673332 http://www.tct-lab.com Report No.: TCT231024E014 Page 77 of 94 Hotline: 400-6611-140 Tel: 86-755-27673339 Fax: 86-755-27673332 http://www.tct-lab.com Report No.: TCT231024E014 Page 78 of 94 Hotline: 400-6611-140 Tel: 86-755-27673339 Fax: 86-755-27673332 http://www.tct-lab.com Report No.: TCT231024E014 Page 79 of 94 Hotline: 400-6611-140 Tel: 86-755-27673339 Fax: 86-755-27673332 http://www.tct-lab.com Report No.: TCT231024E014 Page 80 of 94 Hotline: 400-6611-140 Tel: 86-755-27673339 Fax: 86-755-27673332 http://www.tct-lab.com SID5000-6000 Report No.: TCT231024E014 Page 81 of 94 Hotline: 400-6611-140 Tel: 86-755-27673339 Fax: 86-755-27673332 http://www.tct-lab.com Report No.: TCT231024E014 Page 82 of 94 Hotline: 400-6611-140 Tel: 86-755-27673339 Fax: 86-755-27673332 http://www.tct-lab.com Report No.: TCT231024E014 Page 83 of 94 Hotline: 400-6611-140 Tel: 86-755-27673339 Fax: 86-755-27673332 http://www.tct-lab.com Report No.: TCT231024E014 Page 84 of 94 Hotline: 400-6611-140 Tel: 86-755-27673339 Fax: 86-755-27673332 http://www.tct-lab.com Report No.: TCT231024E014 Page 85 of 94 Hotline: 400-6611-140 Tel: 86-755-27673339 Fax: 86-755-27673332 http://www.tct-lab.com Report No.: TCT231024E014 Page 86 of 94 Hotline: 400-6611-140 Tel: 86-755-27673339 Fax: 86-755-27673332 http://www.tct-lab.com Report No.: TCT231024E014 Page 87 of 94 Hotline: 400-6611-140 Tel: 86-755-27673339 Fax: 86-755-27673332 http://www.tct-lab.com Report No.: TCT231024E014 Page 88 of 94 Hotline: 400-6611-140 Tel: 86-755-27673339 Fax: 86-755-27673332 http://www.tct-lab.com Report No.: TCT231024E014 Page 89 of 94 Hotline: 400-6611-140 Tel: 86-755-27673339 Fax: 86-755-27673332 http://www.tct-lab.com Report No.: TCT231024E014 Page 90 of 94 Hotline: 400-6611-140 Tel: 86-755-27673339 Fax: 86-755-27673332 http://www.tct-lab.com Report No.: TCT231024E014 Page 91 of 94 Hotline: 400-6611-140 Tel: 86-755-27673339 Fax: 86-755-27673332 http://www.tct-lab.com Report No.: TCT231024E014 Page 92 of 94 Hotline: 400-6611-140 Tel: 86-755-27673339 Fax: 86-755-27673332 http://www.tct-lab.com Report No.: TCT231024E014 Page 93 of 94 Hotline: 400-6611-140 Tel: 86-755-27673339 Fax: 86-755-27673332 http://www.tct-lab.com Appendix E: SAR SYSTEM VALIDATION Per FCC KDB 865664 D02v01, SAR system validation status should be documented to confirm measurement accuracy. The SAR systems (including SAR probes, system components and software versions) used for this device were validated against its performance specifications prior to the SAR measurements. Reference dipoles were used with the required tissue- equivalent media for system validation, according to the procedures outlined in FCC KDB 865664 D01 v01 and IEEE 1528-2013. Since SAR probe calibrations are frequency dependent, each probe calibration point was validated at a frequency within the valid frequency range of the probe calibration point, using the system that normally operates with the probe for routine SAR measurements and according to the required tissue-equivalent media. A tabulated summary of the system validation status including the validation date(s), measurement frequencies, SAR probes and tissue dielectric parameters has been included. SAR System Validation Summary Date Freq. [MHz] Probe S/N Tissu e type COND. PERM. COND. PERM. CW Validation Mod. Validation (σ) (εr) sensitivity Probe linearity Probe isotropy Mod. type Duty factor Peak to average power ratio 10/24/2023 2450 SN 25/22 EPGO 375 Body 2.37 52.10 PASS PASS PASS GMSK PASS N/A 10/24/2023 5G SN 25/22 EPGO3 75 Body 48.94 1.92~ 5.95 PASS PASS PASS OFDM PASS N/A NOTE: While the probes have been calibrated for both a CW and modulated signals, all measurements were performed using communication systems calibrated for CW signals only. Modulations in the table above represent test configurations for which the measurement system has been validated per FCC KDB Publication 865664 D01v01 for scenarios when CW probe calibrations are used with other signal types. SAR systems were validated for modulated signals with a periodic duty cycle, such as OFDM according to KDB 865664. Report No.: TCT231024E014 Page 94 of 94 Hotline: 400-6611-140 Tel: 86-755-27673339 Fax: 86-755-27673332 http://www.tct-lab.com Appendix F: The Check Data of Impedance and Return Loss The information are included in the SAR report to qualify for the three-year extended calibration interval; Impedance in body liquid Date: 10/24/2023 Freq. (MHz) Temp (°C) Dipole Impedance Re(z) Dipole Impedance Im(z) measured Target △（±5Ω） measured Target △（±5Ω） 2450 22 45.90 46.50 -0.60 -0.36 -0.20 -0.16 5G 22 49.02 50.01 -0.99 5.52 5.70 -0.18 Return loss in body liquid Date: 04/15/2022 Freq. (MHz) Temp (°C) Return loss(dB) measured Target △（±20%） 2450 22 -34.65 -32.86 5.45 5G 22 -32.66 -34.56 1.90 liquid Freq. (MHz) Temp (°C) εr / relative permittivity σ(s/m) / conductivity ρ (kg/m3) measured Target △（±5%） measured Target △（±5%） Body 2450 22 45.90 46.50 -0.60 -0.36 -0.20 -0.16 1000 5G 22 49.02 50.01 -0.99 5.52 5.70 -0.18 1000 Test Equipment Manufacturer Model Serial Number Calibration Calibration Date (D.M.Y) Calibration Due (D.M.Y) Signal Generator Angilent N5182A MY47070282 Jun. 29, 2023 Jun. 28, 2024 Multimeter Keithley Multimeter 2000 4078275 Jun. 29, 2023 Jun. 28, 2024 Network Analyzer Agilent 8753E US38432457 Feb. 24, 2023 Feb. 23, 2024 Power Meter Agilent E4418B GB43312526 Jun. 29, 2023 Jun. 28, 2024 Power Sensor Agilent E9301A MY41497725 Jun. 29, 2023 Jun. 28, 2024 Power Amplifier PE PE15A4019 112342 N/A N/A Temperature / Humidity Sensor Control company TH101B 152470214 Jun. 29, 2023 Jun. 28, 2024 *****END OF REPORT****

FCC ID: 2BB4N-TA01A EST Technology Co., Ltd Report No.ESTE-R2309132 Page 1 of 56 FCC PART 15C TEST REPORT FOR CERTIFICATION On Behalf of SHENZHEN ZHOUGUANG TECHNOLOGY CO.LTD. Vibe Tap Model Number: TA01A Additional Model: TA01B, TA01C, TA01D, TA0** (* can be A-Z, 0-9 or blank according to appearance, market) FCC ID: 2BB4N-TA01A Applicant : SHENZHEN ZHOUGUANG TECHNOLOGY CO.LTD. Address: B401-p, longgang tian'an digital park, huanggekeng, community, longcheng street, longgang district, Shenzhen, Gugangdong, China Prepared By: EST Technology Co., Ltd. Chilingxiang, Qishantou, Santun, Houjie, Dongguan, Guangdong, China Tel: 86-769-83081888-808 Report Number: ESTE-R2309132 Date of Test: Jun. 14, ~ Sep. 19, 2023 Date of Report: Sep. 20, 2023 FCC ID: 2BB4N-TA01A EST Technology Co., Ltd Report No.ESTE-R2309132 Page 2 of 56 TABLE OF CONTENTS Description Page TEST REPORT VERIFICATION......................................................................................................................... 3 1. GENERAL INFORMATION ................................................................................................................. 5 1.1. Description of Device (EUT) ........................................................................................................... 5 1.2. Antenna Information ........................................................................................................................ 5 1.3. Information of RF Cable .................................................................................................................. 5 2. SUMMARY OF TEST ......................................................................................................................... 6 2.1. Summary of test result ...................................................................................................................... 6 2.2. Test Facilities ................................................................................................................................... 7 2.3. Measurement uncertainty ................................................................................................................. 8 2.4. Assistant equipment used for test ..................................................................................................... 8 2.5. Block Diagram ................................................................................................................................. 8 2.6. Test Mode ......................................................................................................................................... 9 2.7. Power Setting of Test Software ........................................................................................................ 9 2.8. Duty Cycle ...................................................................................................................................... 10 2.9. Channel List ................................................................................................................................... 11 2.10. Test Equipment List ....................................................................................................................... 12 3. 6DB BANDWIDTH .......................................................................................................................... 14 3.1. Limit ............................................................................................................................................... 14 3.2. Test Setup ....................................................................................................................................... 14 3.3. Spectrum Analyzer Setting ............................................................................................................. 14 3.4. Test Procedure ................................................................................................................................ 14 3.5. Test Result ...................................................................................................................................... 14 4. MAXIMUM PEAK OUTPUT POWER ................................................................................................. 15 4.1. Limit ............................................................................................................................................... 15 4.2. Test Setup ....................................................................................................................................... 15 4.3. Spectrum Analyzer Setting ............................................................................................................. 15 4.4. Test Procedure ................................................................................................................................ 15 4.5. Test Result ...................................................................................................................................... 15 5. POWER SPECTRAL DENSITY .......................................................................................................... 16 5.1. Limit ............................................................................................................................................... 16 5.2. Test Setup ............................................................…

Text truncated - open the document above for the full version.