2BCBU-NKTL01Reaction Training System

2.911 (d)(7)USA Agent v1.2 Section 2.911(d)(7) USA Agent for Service of Process Company name: Shenzhen YuanRui Information Technology Co., Ltd Address: Room 201,A Bldg,NO.1QianWan 1st Road ShenZhen Hong Kong Cooperation Zone Shenzhen China FCC ID: 2BCBU-NKTL01 Date: Feb. 03, 2026 2.911(d)(7) USA Designated Agent for Service of Process We, [Shenzhen YuanRui Information Technology Co., Ltd] (“the applicant”) designate [Wedo Group] NOTE1 for the purpose of accepting service of process on behalf of the applicant. Applicant consent: We Acknowledge our consent to accept service of process in the United States for matters related to the applicable equipment, and at the physical U.S. address and email address of the designated agent and acknowledge our acceptance of our obligation to maintain an agent for service of process in the United States for no less than one year after either the grantee has permanently terminated all marketing and importation of the applicable equipment within the U.S., or the conclusion of any Commission-related administrative or judicial proceeding involving the equipment, whichever is later. Agent obligation: We Acknowledge our obligation to accept service of process in the United States for matters related to the applicable equipment at our physical U.S. address and email address for no less than one year after either the grantee has permanently terminated all marketing and importation of the applicable equipment within the U.S., or the conclusion of any Commission-related administrative or judicial proceeding involving the equipment, whichever is later. USA Agent Company name: Wedo Group Address: 710 Arabian Ln Walnut, CA 91789, United States FRN：0037730611 Contact Name: Jeffrey Chen Telephone No: (323) 528-1888 Email: [email protected] Applicant Company name: Shenzhen YuanRui Information Technology Co., Ltd Address: Room 201,A Bldg,NO.1QianWan 1st Road ShenZhen Hong Kong Cooperation Zone Shenzhen China FRN: 0034073437 Contact Name: Lucy Liu Telephone No: 18922853321 Email: [email protected] Signature: Signature:

Shenzhen YuanRui Information Technology Co., Ltd. Room 201,A Bldg,NO.1QianWan 1st Road ShenZhen Hong Kong Cooperation Zone Shenzhen China Attestation Statements Not Covered Entity Applicant & Not Covered Equipment To: Federal Communications Commission Date: Feb. 03, 2026 7435 Oakland Mills Road, Columbia, MD 21046, USA Ref: Information Required by Section 2.911(d)(5)(i) & (ii) FCC ID: 2BCBU-NKTL01 Shenzhen YuanRui Information Technology Co., Ltd. (“the applicant”) certifies that, as of the date of the filing of the application, the applicant is not identified on the Covered List, established pursuant to § 1.50002 of reference chapter, as an entity producing “covered” communication equipment. The equipment for which authorization is sought is not “covered” telecommunications equipment and video surveillance equipment produced by entities identified on the Commission’s Covered List that prohibited from receiving an equipment authorization pursuant to section § 2.903 of the FCC rules. Sincerely yours, Applicant Signature Printed Name: Lucy Liu Title: Product Manager Address: Room 201,A Bldg,NO.1QianWan 1st Road ShenZhen Hong Kong Cooperation Zone Shenzhen China Tel.:18922853321 Email: [email protected]

Shenzhen YuanRui Information Technology Co., Ltd. Room 201,A Bldg,NO.1QianWan 1st Road ShenZhen Hong Kong Cooperation Zone Shenzhen China 1 | P a g e Attestation Statements To: Federal Communications Commission Date: Feb. 03, 2026 7435 Oakland Mills Road, Columbia, MD 21046, USA Subject: Attestation of Compliance with FCC Covered List Software Requirements FCC ID: 2BCBU-NKTL01 Product Name: Reaction Training System This letter serves as an attestation that the equipment identified above ☐ is / ☒ is not (select one) "covered" software as defined under the Federal Communications Commission (FCC) Covered List requirements, as outlined in FCC 22-84 and KDB 986446. Specifically, the undersigned certifies that the equipment for which authorization is sought: 1. Does not contain cybersecurity or anti-virus software produced or provided by Kaspersky Lab, Inc. or any of its successors, assignees, parents, subsidiaries, affiliates, or any entity that has rebranded or relabeled software produced by the aforementioned entities. 2. Does not have the capability to store, run, or deliver any software identified on the FCC Covered List, including but not limited to cybersecurity and anti-virus software. To support this attestation, the appendix evaluation documentation has been prepared and is included in the certification filing. This attestation is based on a thorough evaluation of the device's design, functionality, and software environment. The undersigned affirms that the information provided is accurate and complete to the best of their knowledge. Sincerely yours, Applicant Signature Printed Name: Lucy Liu Title: Product Manager Address: Room 201,A Bldg,NO.1QianWan 1st Road ShenZhen Hong Kong Cooperation Zone Shenzhen China Tel.:18922853321 Email: [email protected] Shenzhen YuanRui Information Technology Co., Ltd. Room 201,A Bldg,NO.1QianWan 1st Road ShenZhen Hong Kong Cooperation Zone Shenzhen China 2 | P a g e Evaluation regarding to the Covered List Software: Compliance Methodology Evaluation Process Results Device is Inherent compliance ☒ The Chipset(s) used is limited to run the Cybersecurity or anti-virus software. Compliance ☒ The Memory used is limited to run the Cybersecurity or anti-virus software. Compliance ☒ There is storage capacity limitation for store or install the Cybersecurity or anti-virus software. Compliance ☒ Operating system used is limited to run, install or deliver the Cybersecurity or anti-virus software. Compliance Device is not Inherent compliance ☐ Evaluation Based on Software Bill of Materials (SBoM) See attached “SBoM“ Note:The SBoM content is limited to the scope of covered list software (e.g. antivirus and cybersecurity software). ☐ Evaluation Based on Scan for Software on the device ☐ Evaluation Based on Filesystem scan ☐ Evaluation Based on Running software check SBOM (Software Bill of Materials) [For Device is not Inherent compliance] Section Component Name Version Supplier 1 2 3

Shenzhen YuanRui Information Technology Co., Ltd Room 201,A Bldg,NO.1QianWan 1st Road ShenZhen Hong Kong Cooperation Zone Shenzhen China Feb. 03, 2026 Office of Engineering Technology Federal Communications Commission 7435 Oakland Mills Road Columbia, MD 21046 USA Subject: Explanation of differences between product types FCC ID: 2BCBU-NKTL01 Models: NK-TL01, NK-TL02, NK-TL03, NK-TL04, NK-TL05, NK-TL06, NK-TL07, NK-TL08, NK-TL09, NK-TL10 To Whom It May Concern: We, The Shenzhen YuanRui Information Technology Co., Ltd hereby declare that the model : NK-TL01 is identical with the model : NK-TL02, NK- TL03, NK-TL04, NK-TL05, NK-TL06, NK-TL07, NK-TL08, NK-TL09, NK-TL10, except the model name. Sincerely, Shenzhen YuanRui Information Technology Co., Ltd Signature: [Lucy Liu, Product Manager]

Shenzhen YuanRui Information Technology Co., Ltd Room 201,A Bldg,NO.1QianWan 1st Road ShenZhen Hong Kong Cooperation Zone Shenzhen China Feb. 03, 2026 Federal Communications Commission Authorization and Evaluation Division 7435 Oakland Mills Road Columbia, MD 21046 Subject: Agent Authorization for FCC ID: 2BCBU-NKTL01 I, the undersigned, hereby authorize (Attestation of Global Compliance (Shenzhen) Co., Ltd) to act on our behalf in all matters relating to this application for equipment certification. Any act carried out by (Attestation of Global Compliance (Shenzhen) Co., Ltd) shall have the same effect as our own and I acknowledge that all responsibility for complying with the terms and conditions of certification, as specified by DERYCOM CERTIFICATION SERVICES, INC., still resides with Shenzhen YuanRui Information Technology Co., Ltd We certify that we are not subject to a denial of federal benefits that includes FCC benefits pursuant to Section 5301 of the Anti-Drug Abuse Act of 1988, 21 U.S.C. §862, and that no party to the application, as defined in 47 CFR §1.2002(b), is subject to a denial of federal benefits that includes FCC benefits pursuant to that section. Sincerely, Full name of contact person listed on FCC’s website: Lucy Liu Title: Product Manager Tel: 18922853321 Fax: 18922853321 Email: [email protected]

Report No.: AGC16839260101AP02 Page 1 of 4 EXTERNAL PHOTOS All VIEW OF EUT TOP VIEW OF EUT Report No.: AGC16839260101AP02 Page 2 of 4 BOTTOM VIEW OF EUT FRONT VIEW OF EUT Report No.: AGC16839260101AP02 Page 3 of 4 BACK VIEW OF EUT LEFT VIEW OF EUT Report No.: AGC16839260101AP02 Page 4 of 4 RIGHT VIEW OF EUT ****************************************End of Report*************************************

FCC ID Label Location 30mm*40mm FCC ID: 2BCBU-NKTL01

Report No.: AGC16839260101AP02 Page 1 of 4 INTERNAL PHOTOS OPEN VIEW OF EUT (FIGURE 1) OPEN VIEW OF EUT (FIGURE 2) Report No.: AGC16839260101AP02 Page 2 of 4 BATTERY VIEW OF EUT INTERNAL VIEW OF EUT (FIGURE 1) Report No.: AGC16839260101AP02 Page 3 of 4 INTERNAL VIEW OF EUT (FIGURE 2) INTERNAL VIEW OF EUT (FIGURE 3) Report No.: AGC16839260101AP02 Page 4 of 4 INTERNAL VIEW OF EUT (FIGURE 4) INTERNAL VIEW OF EUT (FIGURE 5) ****************************************End of Report************************************* BT Antenna

Page 1 of 10 RF Exposure Report Report No.: AGC16839260101FH01 FCC ID : 2BCBU-NKTL01 APPLICATION PURPOSE : Original Equipment PRODUCT DESIGNATION : Reaction Training System BRAND NAME : Nekteck MODEL NAME : NK-TL01, NK-TL02, NK-TL03, NK-TL04, NK-TL05, NK-TL06, NK-TL07, NK-TL08, NK-TL09, NK-TL10 APPLICANT : Shenzhen YuanRui Information Technology Co., Ltd DATE OF ISSUE : Feb. 03, 2026 STANDARD(S) : FCC Part 2 Subpart J §2.1093 FCC KDB 447498 D01 V06 REPORT VERSION : V1.0 Attestation of Global Compliance (Shenzhen) Co., Ltd Report No.: AGC16839260101FH01 Page 2 of 10 Report Revise Record Report Version Revise Time Issued Date Valid Version Notes V1.0 / Feb. 03, 2026 Valid Initial Release Report No.: AGC16839260101FH01 Page 3 of 10 Table of Contents 1. General Information ........................................................................................................................................ 4 2. Product Information ........................................................................................................................................ 5 2.1 Product Technical Description ................................................................................................................... 5 3. Test Environment ............................................................................................................................................ 6 3.1 Address Of The Test Laboratory ............................................................................................................... 6 3.2 Test Facility ................................................................................................................................................ 6 3.3 Environmental Conditions ......................................................................................................................... 7 4. Portable Device Evaluation Method and Limit ............................................................................................. 8 5. Measurement Results ..................................................................................................................................... 9 6. Measurement Evaluation ................................................................................................................................ 9 Report No.: AGC16839260101FH01 Page 4 of 10 1. General Information Applicant Shenzhen YuanRui Information Technology Co., Ltd Address Room 201,A Bldg,NO.1QianWan 1st Road ShenZhen Hong Kong Cooperation Zone Shenzhen China Manufacturer Shenzhen Faray InfoTech Co. Ltd. Address Room 401, Block A, Xichuang Technology Building, No.7025, Liuxian Avenue, Xili Community, Xili Street, Nanshan District, Shenzhen, China Factory Tendo Company Limited Address No.13, Changle Road,Sangyuan Industrial Zone, Dongcheng District, Dongguan, Guangdong Product Designation Reaction Training System Brand Name Nekteck Test Model NK-TL01 Series Model(s) NK-TL02, NK-TL03, NK-TL04, NK-TL05, NK-TL06, NK-TL07, NK-TL08, NK-TL09, NK-TL10 Difference Description All the same except for the model name. Date of receipt of test item Jan. 27, 2025 Date of Test Jan. 27, 2025 to Feb. 03, 2026 Deviation from Standard No any deviation from the test method Condition of Test Sample Normal Test Result Pass Test Report Form No AGCER-FCC-RF Exposure-V1 Note: The test results of this report relate only to the tested sample identified in this report. Prepared By Sam Zheng (Project Engineer) Feb. 03, 2026 Reviewed By Bibo Zhang (Reviewer) Feb. 03, 2026 Approved By Angela Li (Authorized Officer) Feb. 03, 2026 Report No.: AGC16839260101FH01 Page 5 of 10 2. Product Information 2.1 Product Technical Description Frequency Band (Operating) Bluetooth: 2.402GHz ~ 2.480GHz Other: Hardware Version V2.3 Software Version 0.0.15 Modulation Type BLE GFSK 1Mbps GFSK 2Mbps Maximum Transmitter Power -1.352dBm Device Category Portable (<20cm separation) Mobile (>20cm separation) Others: Antenna Diversity Single antenna Multiple antennas Tx diversity Rx diversity Tx/Rx diversity Antenna Designation Chip Antenna Antenna Gain 3.22dBi Minimum Assessment Distance 5mm Evaluation Applied MPE Evaluation SAR Evaluation Report No.: AGC16839260101FH01 Page 6 of 10 3. Test Environment 3.1 Address Of The Test Laboratory Laboratory: Attestation of Global Compliance (Shenzhen) Co., Ltd. Address: 1-2/F, Building 19, Junfeng Industrial Park, Chongqing Road, Heping Community, Fuhai Street, Bao'an District, Shenzhen, Guangdong, China 3.2 Test Facility The test facility is recognized, certified, or accredited by the following organizations: CNAS-Lab Code: L5488 Attestation of Global Compliance (Shenzhen) Co., Ltd. has been assessed and proved to follow CNAS-CL01 Accreditation Criteria for Testing and Calibration Laboratories (identical to ISO/IEC17025: 2017 General Requirements for the Competence of Testing and Calibration Laboratories.) A2LA-Lab Cert. No.: 5054.02 Attestation of Global Compliance (Shenzhen) Co., Ltd. EMC Laboratory has been accredited by A2LA for technical competence in the field of electrical testing, and proved to follow ISO/IEC 17025: 2017 General Requirements for the Competence of Testing and Calibration Laboratories and any additional program requirements in the identified field of testing. FCC-Registration No.: 975832 Attestation of Global Compliance (Shenzhen) Co., Ltd. EMC Laboratory has been registered and fully described in a report filed with the FCC (Federal Communications Commission). The acceptance letter from the FCC is maintained in our files with Registration 975832. IC-Registration No.: 24842(CAB identifier: CN0063) Attestation of Global Compliance (Shenzhen) Co., Ltd. EMC Laboratory has been registered and fully described in a report filed with the Certification and Engineering Bureau of Industry Canada. The acceptance letter from the IC is maintained in our files with Registration 24842. Report No.: AGC16839260101FH01 Page 7 of 10 3.3 Environmental Conditions …

Text truncated - open the document above for the full version.

深圳市 永联无线科技有限公司 ShenZhen City Flink Wi Technology CO.,LTD. 产品承认书 SPECIFICATION FOR APPROVED 客户 CUSTOMER: 产品名称 PRODUCTS: YL5012H1R2G45 客户料号 PART NO: 产品型号 Spec.: 日期 Data: 供应商 SUPPLIER 拟制 审核 批准 PREPARED BY CHECKE D BY APPROVED BY 客户 CUSTOMER 承认 审核 批准 ACCEPTED BY CHECKED BY APPROVED BY 备注：承认盖章后请回复一份承认书（或复印件）给我司，其余由贵公司存档 REMARK:Please send us one(or copy)of this approval with stamp after accepting,other copies filed by the customer. 地址：深圳市宝安45区裕安一路华创达商务楼606 电话 Tel: 18820170917 传真 Fax: 0755-26976277 2024.01.06 ADDRESS：606 Huachuangda Business Building, Yu'an 1st Road, Bao'an 45 District，,Shenzhen 永联无线 2.4GHz Chip Antenna: YL5012H1R2G45 ______________________________________________________________________________________________________ Application: WLAN, 802.11b/g, Bluetooth, etc... Features SMD, high reliability, ultra Impact, Omni-directional... Electrical Specification Working Frequency Range 2400 ~2484 MHz Peak Gain 3.22dBi (Typ.) Impedance 50 Ohm Return loss 10 dB ( Min) Polarization Linear Azimuth Beamwidth Omni-directional Operation Temperature(°C) -40 ~85°C The specification is defined on EVB. Dimension and Terminal Configuration Part number YL 5012 H1 R 2G45 (1) (2) (3) (4) (5) (1)Product Type Chip Antenna (2) Size Code 5.0x1.2mm (3) Type Code H1 (4) Packing Tape and reel (5) Frequency 2.45GHz Dimension (mm) No. Terminal Name L 5.0 +-0.20 1 Feeding W 1.2+-0.20 2 Soldering T 1.20+-0.20 A 0.20+-0.20 永联无线 2.4GHz 2.45HHz Chip Antenna:YL5012H1R2G45 ______________________________________________________________________________________________________ Evaluation Board Reference PCB Dimension & Antenna Layout Reference unit :mm Electrical Characteristics Return Loss & Radiation Return Loss Frequency (MHz) S11 (dB) 2400 -12.8 2442 -19.8 2484 -11.9 Radiation 2.4GHz 3216 Chip Antenna: YL5012H1R2G45 _____________________________________________________________________________________________________ _ 3D&2D Radiation Drawing 2.4GHz 2.45HHz Chip Antenna: YL5012H1R2G45 永联无线 ______________________________________________________________________________________________________ Taping Specifications Reel Taping Blister Tape Checking note Index Spec (mm) Internal diameter of reel A 60.20 ± 0.50 External diameter of reel B 178 ± 1.00 Quantity/per reel 2500 pcs Tape material Plastic (embossed) Checking note Index Spec (mm) Sprocket hole D0 1.50 +0.10/-0.00 Distance sprocket hole to outside E1 1.75 ± 0.10 Distance sprocket hole to pocket F 5.50 ± 0.05 Distance sprocket hole to sprocket hole P0 4.00 ± 0.10 Distance pocket to pocket P1 4.00 ± 0.10 Distance sprocket hole to pocket P2 2.00 ± 0.05 Tape width W 12.00 +0.30/-0.10 Pocket width nominal clearance A0 2.28 ± 0.13 Pocket length nominal clearance B0 5.70 ± 0.13 Pocket depth minimum clearance K0 1.58 ± 0.10 Thickness of tape T 0.23 ± 0.02 2.4GHz 2.45HHz Chip Antenna: YL5012H1R2G45 永联无线 ______________________________________________________________________________________________________ Reliability Table Test ItemProcedure Requirements Ceramic Type Remark (Reference) Electrical Characterization Fulfill the electrical specification User Spec. Thermal Shock 1. Preconditioning: 50 ± 10°C / 1 hr , then keep for 24 ± 1 hrs at room temp. 2. Initial measure: Spec: refer Initial spec. 3. Rapid change of temperature test: -30°C to +85°C; 100 cycles; 15 minutes at Lower category temperature; 15 minutes at Upper category temperature. No Visible Damage. Fulfill the electrical specification. MIL-STD-202 107 Temperature Cycling 1. Initial measure: Spec: refer Initial spec. 2. 100 Cycles (-30°C to +85°C), Soak Mode=1 (2 Cycle/hours). 3. Measurement at 24 ± 2Hours after test condition. No Visible Damage. Fulfill the electrical specification. JESD22 JA104 High Temperature Exposure 1. Initial measure: Spec: refer Initial spec. 2. Unpowered; 500hours @ T=+85°C. 3. Measurement at 24 ± 2 hours after test. No Visible Damage. Fulfill the electrical specification. MIL-STD-202 108 Low Temperature Storage 1. Initial measure: Spec: refer Initial spec. 2. Unpowered: 500hours @ T= -30°C. 3. Measurement at 24 ± 2 hours after test. No Visible Damage. Fulfill the electrical specification. MIL-STD-202 108 Solderability (SMD Bottom Side) Dipping method: a. Temperature: 235 ± 5°C b. Dipping time: 3 ± 0.5s The solder should cover over 95% of the critical area of bottom side. IEC 60384-21/22 4.10 Soldering Heat Resistance (RSH) Preheating temperature: 150 ± 10°C. Preheating time: 1~2 min. Solder temperature: 260 ± 5°C. Dipping time: 5 ± 0.5s No Visible Damage.IEC 60384-21/22 4.10 Vibration5g's for 20 min., 12 cycles each of 3 orientations Note: Use 8"X5" PCB .031" thick 7 secure points on, one long side and 2 secure points at corners of opposite sides. Parts mounted within 2" from any secure point. Test from 10-2000 Hz. No Visible Damage.MIL-STD-202 Method 204 Mechanical Shock Three shocks in each direction shall be applied along the three mutually perpendicular axes of the test specimen (18 shocks) Peak value: 1,500g’s Duration: 0.5ms Velocity change: 15.4 ft/s Waveform: Half-sine No Visible Damage.MIL-STD-202 Method 213 Humidity Bias 1. Humidity: 85% R.H., Temperature: 85 ± 2 °C. 2. Time: 500 ± 24 hours. 3. Measurement at 24 ± 2hrs after test condition. No Visible Damage. Fulfill the electrical specification. MIL-STD-202 Method 106 永联无线 2.4GHz 2.45HHz Chip Antenna: YL5012H1R2G45 ______________________________________________________________________________________________________ Revision History Revision Date Content 1 2021/7/20New issue Board Flex (SMD) 1. Mounting method: IR-Reflow. PCB Size (L:100 × W:40 × T:1.6mm) 2. Apply the load in direction of the arrow until bending reaches 2 mm. No Visible Damage.AEC-Q200 005 AdhesionForce of 1.8Kg for 60 seconds.No Visible Damage Magnification of 20X or greater may be employed for inspection of the mechanical integrity of the device body terminals and body/terminal junction. AEC-Q200 006 Physical Dimension Any applicable method using x10 magn…

Text truncated - open the document above for the full version.

Page 1 of 54 FCC Test Report Report No.: AGC16839260101FR01 FCC ID : 2BCBU-NKTL01 APPLICATION PURPOSE : Original Equipment PRODUCT DESIGNATION : Reaction Training System BRAND NAME : Nekteck MODEL NAME : NK-TL01, NK-TL02, NK-TL03, NK-TL04, NK-TL05, NK-TL06, NK-TL07, NK-TL08, NK-TL09, NK-TL10 APPLICANT : Shenzhen YuanRui Information Technology Co., Ltd DATE OF ISSUE : Feb. 03, 2026 STANDARD(S) : FCC Part 15 Subpart C §15.247 REPORT VERSION : V1.0 Attestation Of Global Compliance (Shenzhen) Co., Ltd Report No.: AGC16839260101FR01 Page 2 of 54 Report Revise Record Report Version Revise Time Issued Date Valid Version Notes V1.0 / Feb. 03, 2026 Valid Initial Release Report No.: AGC16839260101FR01 Page 3 of 54 Table of Contents 1. General Information ........................................................................................................................................ 5 2. Product Information ........................................................................................................................................ 6 2.1 Product Technical Description ................................................................................................................... 6 2.2 Test Frequency List ................................................................................................................................... 6 2.3 Related Submittal(S) / Grant (S) ............................................................................................................... 7 2.4 Test Methodology ...................................................................................................................................... 7 2.5 Special Accessories .................................................................................................................................. 7 2.6 Equipment Modifications ........................................................................................................................... 7 2.7 Antenna Requirement................................................................................................................................ 7 3. Test Environment ............................................................................................................................................ 8 3.1 Address of the Test Laboratory ................................................................................................................. 8 3.2 Test Facility ................................................................................................................................................ 8 3.3 Environmental Conditions ......................................................................................................................... 9 3.4 Measurement Uncertainty ......................................................................................................................... 9 3.5 List of Equipment Use ............................................................................................................................. 10 4. System Test Configuration ........................................................................................................................... 12 4.1 EUT Configuration ................................................................................................................................... 12 4.2 EUT Exercise ........................................................................................................................................... 12 4.3 Configuration of Tested System .............................................................................................................. 12 4.4 Equipment Used In Tested System ........................................................................................................ 13 4.5 Summary of Test Results ........................................................................................................................ 14 5. Description of Test Modes ........................................................................................................................... 15 6. Duty Cycle Measurement ............................................................................................................................. 16 7. RF Output Power Measurement .................................................................................................................. 17 7.1 Provisions Applicable .............................................................................................................................. 17 7.2 Measurement Procedure ......................................................................................................................... 17 7.3 Measurement Setup (Block Diagram of Configuration) .......................................................................... 17 7.4 Measurement Result ............................................................................................................................... 17 8. 6dB Bandwidth Measurement ...................................................................................................................... 20 8.1 Provisions Applicable .............................................................................................................................. 20 8.2 Measurement Procedure ......................................................................................................................... 20 8.3 Measurement Setup (Block Diagram of Configuration) .......................................................................... 20 8.4 Measurement Results ............................................................................................................................. 21 9. Power Spectral Density Measurement ........................................................................................................ 25 9.1 Provisions Applicable .................................…

Text truncated - open the document above for the full version.

Report No.: AGC16839260101AP01 Page 1 of 2 TEST SETUP PHOTOS RADIATED EMISSION TEST SETUP BELOW 1GHz RADIATED EMISSION TEST SETUP ABOVE 1GHz Report No.: AGC16839260101AP01 Page 2 of 2 AC POWER LINE CONDUCTED TEST SETUP RF CONDUCTED TEST SETUP ****************************************End of Report*************************************