2BCMP-ASB101Mini wifi camera

FCC Statement This device complies with part 15 of the FCC rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. Changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment. NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures: •Reorient or relocate the receiving antenna. •Increase the separation between the equipment and receiver. •Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. •Consult the dealer or an experienced radio/TV technician for help. The device has been evaluated to meet general RF exposure requirement. The device can be used in portable exposure condition without restriction.

LocalRepresentativeLetter ForCertificationServiceintheUSA FederalCommunicationsCommission EquipmentAuthorizationDivision,ApplicationProcessingBranch 7435OaklandMillsRoad Columbia,MD21048 Towhomitmayconcern PursuanttoSection2.911(d)(7),oftheCommission’sRules(47C.F.R.)weattestasfollowsfor theproductlistedbelow: FCCIDModelname 2BCMP-ASB101AS-B101 Weherebyacknowledgeasfollows: i.bothsigneesconfirmthatthepointofcontactacceptsresponsibilitytoactasaUS- AmericanRepresentativeonbehalfoftheapplicant ii.thepointofcontactprovidesthephysicalU.S.addressandemailaslistedbelow iii.bothpartiesmaintaintherequirementsofthisagreementwithoutexpirationdate US-AmericanPointofContactApplicant/ApprovalHolder SignatureSignature CompanyName:FCCUSAgent,LLCAusekLimited FRN:00334028840034165829 ContactName:TimPayneSarahTang Address:3722IllinoisAvenue,SaintCharles, IL,60174,USA No.4Building,JianjinBusiness Park,DonghuansecondRoad, LonghuaDistrict, Shenzhen,China Phone:708-571-3148008613927439912 Email:[email protected]

Covered Equipment Attestation Letter For Certification Service in the USA Federal Communications Commission Equipment Authorization Division, Application Processing Branch 7435 Oakland Mills Road Columbia, MD 21048 To whom it may concern Pursuant to Section 2.911(d)(5)(i)-(ii) of the Commission’s Rules (47 C.F.R.) we attest as follows for the product listed below: FCC ID Model name 2BCMP-ASB101 AS-B101 We, Applicant Company Name: Ausek Limited Address: No.4 Building, Jianjin Business Park, Donghuan second Road, Longhua District, Shenzhen, China Phone: +86-13927439912 certify that the equipment for which authorization is sought is not “covered” equipment prohibited from receiving an equipment authorization pursuant to section 2.903 of the FCC rules. This includes the cybersecurity and anti-virus software produced or provided by Kaspersky Lab, Inc. or any of ist successors and assignees. We certify that, as of the date of the filing of the application, the applicant is not identified on the Covered List as an entity producing “covered” equipment. If you have any questions, please feel free to contact us at the address shown below. Sincerely, 2026-07-14 Signature Date Name / Title: Sarah Tang / Manager Company: Ausek Limited Address: No.4 Building, Jianjin Business Park, Donghuan second Road, Longhua District, Shenzhen, China Phone: +86-13927439912 Fax: +86-755-86165667 E-Mail: [email protected]

Due Diligence Letter For Certification Service in the USA Federal Communications Commission Equipment Authorization Division, Application Processing Branch 7435 Oakland Mills Road Columbia, MD 21048 To whom it may concern FCC ID Model name 2BCMP-ASB101 AS-B101 Pursuant to KDB 986446 D01 Covered Equipment Guidance the evaluation of the product above shows compliance for the following reasons: Compliance Evaluation process Results Inherent compliance The chipset(s) used is not capable of running the cybersecurity and/or anti-virus software Compliance The memory used does not allow the running the cybersecurity and/or anti-virus software Compliance The storage capacity does not allow the running the cybersecurity and/or anti-virus software Compliance The operating system used is not capable of running the cybersecurity and/or anti-virus software Compliance No inherent compliance Based on software bill of material Based on scan for running software on the device Based on filesystem scan for cybersecurity and/or anti-virus software The equipment for which authorization is sought complies with the rules and fulfils the requirements as detailed in the above mentioned KDB. Evaluation performed by Company Name: Shenzhen Global Test Service Co., Ltd. Contact Name: Jinghua Xiao Address: Room No. 101, Building 1, and Room No. 101, Building 3, No. 88 Jinkang Road, Jinsha Community, Kengzi Sub-district, Pingshan District, Shenzhen City, Guangdong, China Phone: +86-755-28717088 Email: [email protected] Date: 2026-07-14 Signature:

Confidentiality Request Letter For Certification Service in the USA Federal Communication Commission Equipment Authorization Division, Application Processing Branch 7435 Oakland Mills Road Columbia, MD 21048 To whom it may concern Pursuant to Paragraphs §0.457 and 0.459 of the Commission’s Rules (47 C.F.R.) and Section §552(b)(4) of the Freedom of Information Act, we request confidentiality for the documentation of the following products: FCC ID Model name 2BCMP-ASB101 AS-B101 For the products listed above, we request permanent confidentiality for all applicable exhibits as there are: • the Operational Description • the Block Diagram • the Schematics • the Part List • the Tune up Procedure The above listed exhibits contain trade secrets and proprietary information that could be of benefit to our competitors. If you have any questions, please feel free to contact us at the address shown below. Sincerely, 2026-07-14 Signature Date Name / Title: Sarah Tang / Manager Company: Ausek Limited Address: No.4 Building, Jianjin Business Park, Donghuan second Road, Longhua District, Shenzhen, China Phone: +86-13927439912 Fax: +86-755-86165667 E-Mail: [email protected]

Page 1 of 1 Rev.2.0 Ausek Limited WIFI Channel 12 and 13 Declaration Letter We declare the equipment identified below with regards to Channel 12 and 13 capabilities for FCC ID: 2BCMP-ASB101 Declaration Product hardware does not have the capability to operate on Channel 12 and 13. Product hardware has the capability to operate on Channel 12 and 13. However, these two channels will be disabled via software and will not be accessible to user. Product hardware has the capability to operate on Channel 12 and 13. However, all the operated channels can’t be changed in the RF parameter via software. All channels have complied with all of the requirements sets out in FCC Part 15.247. Product hardware has the capability to operate on WiFi Channel 12 and 13, and meets the requirements of KDB 594280 D01 v02r01. Please note: 1.) By default, this device operates in a mode that is compliant with the U.S. requirements. 2.) This device will also use supplemental information such as geo- location data to determine that it is operating outside the U.S., if necessary, to change its power. Such supplemental data will be derived from the following: Global Navigation Satellite System (GNSS)7 sensors in the device Mobile Country Code (MCC),8 or MCC with a Mobile Network code (MNC), received from a CMRS9 carrier and received directly by a receiver on the device Country information derived from multiple adjacent access points (for example using IEEE Std 802.11d provisions) may be permitted on case-by-case basis Other suitable geo-location data based on IP addresses or other reliable source. Name / Title: Sarah Tang / Manager Signature: Phone: +86-13927439912 Email: [email protected] Date: 2026-07-14

FCC ID: 2BCMP-ASB101 Fig. 1 Fig. 2 FCC ID: 2BCMP-ASB101 Fig. 3 Fig. 4 FCC ID: 2BCMP-ASB101 Fig. 5 Fig. 6 FCC ID: 2BCMP-ASB101 Fig. 7 Fig. 8

_____________________________________________________________________________________________________ LABEL AND LOCATION (Size: L2.5cm x 2.3cm) Label Location

FCC ID: 2BCMP-ASB101 Fig. 1 Fig. 2 FCC ID: 2BCMP-ASB101 Fig. 3 Fig. 4 Antenna FCC ID: 2BCMP-ASB101 Fig. 5

Shenzhen Global Test Service Co.,Ltd. Room No. 101, Building 1, and Room No. 101, Building 3, No. 88 Jinkang Road, Jinsha Community, Kengzi Sub-district, Pingshan District, Shenzhen City, Guangdong ,China RF Exposure evaluation Report Reference No. .................... : FCC ID. ............................................ : GTS20260616001-1-03 2BCMP-ASB101 Compiled by ( position+printed name+signature) .. : File administrators Peter Xiao Supervised by ( position+printed name+signature) .. : Test Engineer Evan Ouyang Approved by ( position+printed name+signature) .. : Manager Jason Hu Date of issue ..................................... : Jul.07, 2026 Representative Laboratory Name : Shenzhen Global Test Service Co.,Ltd. Address ............................................. : Room No. 101, Building 1, and Room No. 101, Building 3, No. 88 Jinkang Road, Jinsha Community,Kengzi Sub-district, Pingshan District, Shenzhen City, Guangdong ,China Applicant’s name ............................ : Ausek Limited Address ............................................. : No.4 Building, Jianjin Business Park, Donghuan second Road, Longhua District, Shenzhen, China Test specification .......................... : Standard ........................................... : 47CFR §1.1310 47CFR §2.1093 KDB447498 D01 General RF Exposure Guidance v06 TRF Originator .................................. : Shenzhen Global Test Service Co.,Ltd. Master TRF ....................................... : Dated 2014-12 Shenzhen Global Test Service Co.,Ltd. All rights reserved. This publication may be reproduced in whole or in part for non-commercial purposes as long as the Shenzhen Global Test Service Co.,Ltd. is acknowledged as copyright owner and source of the material. Shenzhen Global Test Service Co.,Ltd. takes no responsibility for and will not assume liability for damages resulting from the reader's interpretation of the reproduced material due to its placement and context. Test item description .................... : Mini wifi camera Trade Mark ....................................... : N/A Manufacturer ..................................... : Ausek Limited Model/Type reference ....................... : AS-B101 Listed Models ................................... : N/A Exposure category ............................ : Portable Device Hardware Version ............................ : N/A Software Version .............................. : N/A Rating ............................................... : DC 3.7V by battery Recharged by DC 5.0V Result ................................................ : PASS Report No.: GTS20260616001-1-03 Page 2 of 9 T E S T R E P O R T Test Report No. : GTS20260616001-1-03 Jul.07, 2026 ______________________________________________________________________________________________ Date of issue Equipment under Test : Mini wifi camera Model /Type : AS-B101 Listed model : N/A Applicant : Ausek Limited Address : No.4 Building, Jianjin Business Park, Donghuan second Road, Longhua District, Shenzhen, China Manufacturer : Ausek Limited Address : No.4 Building, Jianjin Business Park, Donghuan second Road, Longhua District, Shenzhen, China Test Result: PASS The test report merely corresponds to the test sample. It is not permitted to copy extracts of these test result without the written permission of the test laboratory. Report No.: GTS20260616001-1-03 Page 3 of 9 Contents 1. S U M M A R Y .................................................................................. 4 1.1. Product Description .................................................................................................................................... 4 2. T E S T E N V I R O N M E N T ................................................................... 5 2.1. Address of the test laboratory ................................................................................................................... 5 2.2. Test Facility .................................................................................................................................................. 5 2.3. Environmental conditions .......................................................................................................................... 5 2.4. Statement of the measurement uncertainty ............................................................................................. 5 3 . M E T H O D O F M E A S U R EM E N T ......................................................... 6 3.1. Applicable Standard .................................................................................................................................... 6 3.2. Evaluation Method and Limit...................................................................................................................... 6 4. C O N D U C T E D P O W E R R E S U L T S ...................................................... 7 5. M A N U F A C T U R I N G T O L E R ANCE ...................................................... 7 6 . E V A L U A T I O N R E S U L TS ................................................................ 8 6.1. Standalone Evaluation ................................................................................................................................ 8 7. C O N C L U S I O N ............................................................................. 9 Report No.: GTS20260616001-1-03 Page 4 of 9 1. S U M M A R Y 1.1. Product Description Product Name: Mini wifi camera Trade Mark: N/A Model/Type reference: AS-B101 List Model: N/A Model Declaration N/A Power supply: DC 3.7V by battery Recharged by DC 5.0V Hardware Version N/A Software Version N/A Sample ID GTS20260616001-1-S001-1# & GTS20260616001-1-S001-2# Bluetooth Frequency Range 2402MHz ~ 2480MHz Channel Number 40 channels for Bluetooth (DTS) Channel Spacing 2MHz for Bluetooth (DTS) Modulation Type GFSK for Bluetooth (DTS) 2.4GWLAN WLAN Operation frequency IEEE 802.11b:2412-2462MHz IEEE 802.11g:2412-2462MHz IEEE 802.11n…

Text truncated - open the document above for the full version.

Antenna Describe 1： Antenna Describe Antenna PCB Antenna Gain 0dBi Frequency Range 2.4Ghz‐2.483Ghz Connector Type Direct Location of mearement(company name) SHENZHENSHIXINZHONGXIN TECHNOLOGY.CO.,LTD 2：External View Drawing Picture of antenna Ausek Limited No.4 Building, Jianjin Business Park, Donghuan second Road, Longhua District, Shenzhen, China 3：Measur ement Result 3.1 Return Loss (S11 ) 3.2 Smith Chart 3.3 Gain

FCCID:2BCMP-ASB101 1 Case No. :GTS20260616001-1-01 Ambient Condition: 23 °C, 53 %RH According Standard: ■Part15C Test Date:2026.6.17-2026.7.6Test Engineer: Evan ouyang AppendixA.1: DTS Bandwidth Test Result TestMode Antenna Freq(MHz) DTS BW [MHz] FL[MHz] FH[MHz] Limit[MHz] Verdict BLE Ant1 2402 0.748 2401.524 2402.272 0.5 PASS 2440 0.728 2439.532 2440.260 0.5 PASS 2480 0.728 2479.532 2480.260 0.5 PASS FCCID:2BCMP-ASB101 2 Test Graphs BLE_Ant1_2402 BLE_Ant1_2440 BLE_Ant1_2480 FCCID:2BCMP-ASB101 3 FCCID:2BCMP-ASB101 4 AppendixA.2: Occupied Channel Bandwidth Test Result TestMode Antenna Freq(MHz) OCB [MHz] FL[MHz] FH[MHz] Limit[MHz] Verdict BLE Ant1 2402 1.0408 2401.3841 2402.4249 --- --- 2440 1.0373 2439.3865 2440.4238 --- --- 2480 1.0442 2479.3805 2480.4247 --- --- FCCID:2BCMP-ASB101 5 Test Graphs BLE_Ant1_2402 BLE_Ant1_2440 BLE_Ant1_2480 FCCID:2BCMP-ASB101 6 FCCID:2BCMP-ASB101 7 AppendixA.3: Maximum conducted output power Test Result Peak TestMode Antenna Freq(MHz) Conducted Peak Powert[dBm] Conducted Limit[dBm] Verdict BLE Ant1 2402 4.84 ≤30 PASS 2440 4.61 ≤30 PASS 2480 4.22 ≤30 PASS FCCID:2BCMP-ASB101 8 AppendixA.4: Maximum power spectral density Test Result TestMode Antenna Freq(MHz) Result[dBm/3kHz] Limit[dBm/3kHz] Verdict BLE Ant1 2402 -12.15 ≤8.00 PASS 2440 -12.35 ≤8.00 PASS 2480 -12.67 ≤8.00 PASS FCCID:2BCMP-ASB101 9 Test Graphs BLE_Ant1_2402 BLE_Ant1_2440 BLE_Ant1_2480 FCCID:2BCMP-ASB101 10 FCCID:2BCMP-ASB101 11 AppendixA.5:Band edge measurements Test Result TestMode Antenna ChName Freq(MHz) RefLevel[dBm] Result[dBm] Limit[dBm] Verdict BLE Ant1 Low 2402 2.83 -46.92 ≤-17.17 PASS High 2480 2.25 -46.68 ≤-17.76 PASS FCCID:2BCMP-ASB101 12 Test Graphs BLE_Ant1_Low_2402 BLE_Ant1_High_2480 FCCID:2BCMP-ASB101 13 AppendixA.6:Conducted Spurious Emission Test Result TestMode Antenna Freq(MHz) FreqRange [MHz] RefLevel [dBm] Result[dBm] Limit[dBm] Verdict BLE Ant1 2402 Reference 2.51 2.51 --- PASS 30~1000 2.51 -60.71 ≤-17.49 PASS 1000~26500 2.51 -47.87 ≤-17.49 PASS 2440 Reference 2.32 2.32 --- PASS 30~1000 2.32 -59.81 ≤-17.68 PASS 1000~26500 2.32 -47.75 ≤-17.68 PASS 2480 Reference 1.99 1.99 --- PASS 30~1000 1.99 -60.22 ≤-18.01 PASS 1000~26500 1.99 -47.27 ≤-18.01 PASS FCCID:2BCMP-ASB101 14 Test Graphs BLE_Ant1_2402_0~Reference BLE_Ant1_2402_30~1000 BLE_Ant1_2402_1000~26500 FCCID:2BCMP-ASB101 15 BLE_Ant1_2440_0~Reference BLE_Ant1_2440_30~1000 FCCID:2BCMP-ASB101 16 BLE_Ant1_2440_1000~26500 BLE_Ant1_2480_0~Reference BLE_Ant1_2480_30~1000 FCCID:2BCMP-ASB101 17 BLE_Ant1_2480_1000~26500 FCCID:2BCMP-ASB101 18 AppendixA.7: Duty Cycle Test Result TestMode Antenna Freq(MHz) ON Time [ms] Period [ms] X DC [%] Duty Cycle Factor[dB] 1/T Factor[KHz] BLE Ant1 2402 50.00 50.00 1.0000 100.00 0.00 0.02 2440 50.00 50.00 1.0000 100.00 0.00 0.02 2480 50.00 50.00 1.0000 100.00 0.00 0.02 FCCID:2BCMP-ASB101 19 Test Graphs BLE_Ant1_2402 BLE_Ant1_2440 BLE_Ant1_2480 FCCID:2BCMP-ASB101 20 FCCID:2BCMP-ASB101 21 AppendixA.8:Emissions in Restricted Bands Test Result TestMode Antenna ChName Freq (MHz) Detector Freq [MHz] Result [dBm] Limit [dBm] Result [dBuV/m] Limit [dBuV/m] Verdict BLE Ant1 Low 2402 AV 2310.000 -49.6 ≤-41.20 45.60 ≤54 PASS AV 2388.935 -44.52 ≤-41.20 50.68 ≤54 PASS AV 2390.000 -47.45 ≤-41.20 47.75 ≤54 PASS Peak 2310.000 -43.84 ≤-21.20 51.36 ≤74 PASS Peak 2388.725 -39.11 ≤-21.20 56.09 ≤74 PASS Peak 2390.000 -41.91 ≤-21.20 53.29 ≤74 PASS High 2480 AV 2483.500 -47.27 ≤-41.20 47.93 ≤54 PASS AV 2492.880 -44.98 ≤-41.20 50.22 ≤54 PASS AV 2500.000 -48.61 ≤-41.20 46.59 ≤54 PASS Peak 2483.500 -40.76 ≤-21.20 54.44 ≤74 PASS Peak 2493.600 -38.99 ≤-21.20 56.21 ≤74 PASS Peak 2500.000 -44.27 ≤-21.20 50.93 ≤74 PASS Note： 1. The Antenna Gain is compensated in the graph. 2. The Duty Cycle Factor and RBW Factor is compensated in the graph. 3. The limit in dBm for average detector is conversion from 54dBuV/m, according to 15.209(a). The limit in dBm for peak detector is 20dB above the limit of average detector in dBm. FCCID:2BCMP-ASB101 22 Test Graphs BLE_Ant1_Low_2402_AV BLE_Ant1_Low_2402_Peak BLE_Ant1_High_2480_AV FCCID:2BCMP-ASB101 23 BLE_Ant1_High_2480_Peak

FCCID:2BCMP-ASB101 1 Case No. :GTS20260616001-1-02 Ambient Condition: 23°C,53%RH, Test Date:2026.6.17-2026.7.6Test Engineer:Evan ouyang Appendix B.1: DTS Bandwidth Test Result TestMode Antenna Frequency[MHz] DTS BW [MHz] FL[MHz] FH[MHz] Limit[MHz] Verdict 11B Ant1 2412 9.160 2407.240 2416.400 0.5 PASS 2437 9.120 2432.280 2441.400 0.5 PASS 2462 8.760 2457.280 2466.040 0.5 PASS 11G Ant1 2412 13.800 2403.240 2417.040 0.5 PASS 2437 15.520 2428.280 2443.800 0.5 PASS 2462 15.920 2453.480 2469.400 0.5 PASS 11N20SISO Ant1 2412 15.080 2404.160 2419.240 0.5 PASS 2437 15.080 2429.120 2444.200 0.5 PASS 2462 15.120 2454.120 2469.240 0.5 PASS FCCID:2BCMP-ASB101 2 Test Graphs 11B_Ant1_2412 11B_Ant1_2437 11B_Ant1_2462 FCCID:2BCMP-ASB101 3 11G_Ant1_2412 11G_Ant1_2437 FCCID:2BCMP-ASB101 4 11G_Ant1_2462 11N20SISO_Ant1_2412 11N20SISO_Ant1_2437 FCCID:2BCMP-ASB101 5 11N20SISO_Ant1_2462 FCCID:2BCMP-ASB101 6 Appendix B.2: Occupied Channel Bandwidth Test Result TestMode Antenna Channel Frequency[MHz] OCB [MHz] FL[MHz] FH[MHz] Limit[MHz] Verdict 11B Ant1 2412 13.555 2405.0248 2418.5798 --- --- 2437 13.980 2430.0252 2444.0052 --- --- 2462 13.622 2454.9120 2468.5340 --- --- 11G Ant1 2412 17.181 2403.2156 2420.3966 --- --- 2437 17.448 2428.2188 2445.6668 --- --- 2462 17.585 2452.9545 2470.5395 --- --- 11N20SISO Ant1 2412 17.722 2403.0607 2420.7827 --- --- 2437 17.842 2427.9593 2445.8013 --- --- 2462 17.739 2453.0467 2470.7857 --- --- FCCID:2BCMP-ASB101 7 Test Graphs 11B_Ant1_2412 11B_Ant1_2437 11B_Ant1_2462 FCCID:2BCMP-ASB101 8 11G_Ant1_2412 11G_Ant1_2437 FCCID:2BCMP-ASB101 9 11G_Ant1_2462 11N20SISO_Ant1_2412 11N20SISO_Ant1_2437 FCCID:2BCMP-ASB101 10 11N20SISO_Ant1_2462 FCCID:2BCMP-ASB101 11 Appendix B.3: Maximum conducted output power Test Result Test Mode Antenna Frequency [MHz] Peak power [dBm] Limit [dBm] Verdict 11B Ant1 2412 8.83 ≤30.00 PASS 2437 8.28 ≤30.00 PASS 2462 8.96 ≤30.00 PASS 11G Ant1 2412 8.27 ≤30.00 PASS 2437 8.61 ≤30.00 PASS 2462 8.13 ≤30.00 PASS 11N20SISO Ant1 2412 8.55 ≤30.00 PASS 2437 8.92 ≤30.00 PASS 2462 8.52 ≤30.00 PASS FCCID:2BCMP-ASB101 12 Appendix B.4: Maximum power spectral density Test Result TestMode Antenna Frequency[MHz] Result[dBm/3-100kHz] Limit[dBm/3kHz] Verdict 11B Ant1 2412 -13.38 ≤8.00 PASS 2437 -25.97 ≤8.00 PASS 2462 -32.09 ≤8.00 PASS 11G Ant1 2412 -13.37 ≤8.00 PASS 2437 -33.18 ≤8.00 PASS 2462 -25.96 ≤8.00 PASS 11N20SISO Ant1 2412 -14.14 ≤8.00 PASS 2437 -15.08 ≤8.00 PASS 2462 -15.09 ≤8.00 PASS FCCID:2BCMP-ASB101 13 Test Graphs 11B_Ant1_2412 11B_Ant1_2437 11B_Ant1_2462 FCCID:2BCMP-ASB101 14 11G_Ant1_2412 11G_Ant1_2437 FCCID:2BCMP-ASB101 15 11G_Ant1_2462 11N20SISO_Ant1_2412 11N20SISO_Ant1_2437 FCCID:2BCMP-ASB101 16 11N20SISO_Ant1_2462 FCCID:2BCMP-ASB101 17 Appendix B.5:Band edge measurements Test Result TestMode Antenna ChName Frequency[MHz] RefLevel[dBm] Result[dBm] Limit[dBm] Verdict 11B Ant1 Low 2412 -0.01 -46.21 ≤-20.01 PASS High 2462 -1.58 -49.15 ≤-20.85 PASS 11G Ant1 Low 2412 -5.66 -48 ≤-25.66 PASS High 2462 -8.53 -44.63 ≤-25.54 PASS 11N20SISO Ant1 Low 2412 -7.29 -47.46 ≤-27.29 PASS High 2462 -8.24 -48.57 ≤-28.24 PASS FCCID:2BCMP-ASB101 18 Test Graphs 11B_Ant1_Low_2412 11B_Ant1_High_2462 11G_Ant1_Low_2412 FCCID:2BCMP-ASB101 19 11G_Ant1_High_2462 11N20SISO_Ant1_Low_2412 FCCID:2BCMP-ASB101 20 11N20SISO_Ant1_High_2462 FCCID:2BCMP-ASB101 21 Appendix B.6:Conducted Spurious Emission Test Result TestMode Antenna Frequency[MHz] FreqRange [Mhz] RefLevel [dBm] Result [dBm] Limit [dBm] Verdict 11B Ant1 2412 Reference -1.26 -1.26 --- PASS 30~1000 -1.26 -60.67 ≤-21.26 PASS 1000~26500 -1.26 -46.75 ≤-21.26 PASS 2437 Reference -2.47 -2.47 --- PASS 30~1000 -2.47 -60.37 ≤-22.47 PASS 1000~26500 -2.47 -47.26 ≤-22.47 PASS 2462 Reference -1.94 -1.94 --- PASS 30~1000 -1.94 -60.64 ≤-21.94 PASS 1000~26500 -1.94 -47.76 ≤-21.94 PASS 11G Ant1 2412 Reference -4.63 -4.63 --- PASS 30~1000 -4.63 -60.8 ≤-24.63 PASS 1000~26500 -4.63 -46.64 ≤-24.63 PASS 2437 Reference -9.38 -9.38 --- PASS 30~1000 -9.38 -59.46 ≤-29.38 PASS 1000~26500 -9.38 -46.63 ≤-29.38 PASS 2462 Reference -10.64 -10.64 --- PASS 30~1000 -10.64 -60.63 ≤-30.64 PASS 1000~26500 -10.64 -47.46 ≤-30.64 PASS 11N20SISO Ant1 2412 Reference -7.35 -7.35 --- PASS 30~1000 -7.35 -59.59 ≤-27.35 PASS 1000~26500 -7.35 -46.83 ≤-27.35 PASS 2437 Reference -8.64 -8.64 --- PASS 30~1000 -8.64 -60.38 ≤-28.64 PASS 1000~26500 -8.64 -47.21 ≤-28.64 PASS 2462 Reference -8.87 -8.87 --- PASS 30~1000 -8.87 -60.4 ≤-28.87 PASS 1000~26500 -8.87 -29.65 ≤-28.87 PASS FCCID:2BCMP-ASB101 22 Test Graphs 11B_Ant1_2412_0~Reference 11B_Ant1_2412_30~1000 11B_Ant1_2412_1000~26500 FCCID:2BCMP-ASB101 23 11B_Ant1_2437_0~Reference 11B_Ant1_2437_30~1000 FCCID:2BCMP-ASB101 24 11B_Ant1_2437_1000~26500 11B_Ant1_2462_0~Reference 11B_Ant1_2462_30~1000 FCCID:2BCMP-ASB101 25 11B_Ant1_2462_1000~26500 11G_Ant1_2412_0~Reference FCCID:2BCMP-ASB101 26 11G_Ant1_2412_30~1000 11G_Ant1_2412_1000~26500 11G_Ant1_2437_0~Reference FCCID:2BCMP-ASB101 27 11G_Ant1_2437_30~1000 11G_Ant1_2437_1000~26500 FCCID:2BCMP-ASB101 28 11G_Ant1_2462_0~Reference 11G_Ant1_2462_30~1000 11G_Ant1_2462_1000~26500 FCCID:2BCMP-ASB101 29 11N20SISO_Ant1_2412_0~Reference 11N20SISO_Ant1_2412_30~1000 FCCID:2BCMP-ASB101 30 11N20SISO_Ant1_2412_1000~26500 11N20SISO_Ant1_2437_0~Reference 11N20SISO_Ant1_2437_30~1000 FCCID:2BCMP-ASB101 31 11N20SISO_Ant1_2437_1000~26500 11N20SISO_Ant1_2462_0~Reference FCCID:2BCMP-ASB101 32 11N20SISO_Ant1_2462_30~1000 11N20SISO_Ant1_2462_1000~26500 FCCID:2BCMP-ASB101 33 Appendix B.7: Duty Cycle Test Result TestMode Antenna Frequency [MHz] Transmission Duration [ms] Transmission Period [ms] Duty Cycle [%] Duty Cycle Factor[dB] 1/T Factor[KHz] 11B Ant1 2412 8.38 8.47 98.94 0.05 0.12 2437 8.38 8.47 98.94 0.05 0.12 2462 8.38 8.47 98.94 0.05 0.12 11G Ant1 2412 5.48 5.54 98.92 0.05 0.18 2437 5.48 5.54 98.92 0.05 0.18 2462 5.48 5.54 98.92 0.05 0.18 11N20SISO Ant1 2412 0.16 0.17 94.12 0.26 6.25 2437 0.16 0.17 94.12 0.26 6.25 2462 0.16 0.16 100.00 0.00 6.25 FCCID:2BCMP-ASB101 34 Test Graphs 11B_Ant1_2412 11B_Ant1_2437 11B_A…

Text truncated - open the document above for the full version.

Shenzhen Global Test Service Co.,Ltd. Room No. 101, Building 1, and Room No. 101, Building 3, No. 88 Jinkang Road, Jinsha Community, Kengzi Sub-district, Pingshan District, Shenzhen City, Guangdong, China FCC PART 15 SUBPART C TEST REPORT FCC PART 15.247 Report Reference No. .....................: FCC ID. ............................................ : GTS20260616001-1-02 2BCMP-ASB101 Compiled by ( position+printed name+signature) .. : File administrators Peter Xiao Supervised by ( position+printed name+signature) .. : Test Engineer Evan Ouyang Approved by ( position+printed name+signature) .. : Manager Jason Hu Date of issue ..................................... : Jul.07, 2026 Representative Laboratory Name .: Shenzhen Global Test Service Co.,Ltd. Address ............................................ : Room No. 101, Building 1, and Room No. 101, Building 3, No. 88 Jinkang Road, Jinsha Community,Kengzi Sub-district, Pingshan District, Shenzhen City, Guangdong ,China Applicant’s name ............................ : Ausek Limited Address ............................................ : No.4 Building, Jianjin Business Park, Donghuan second Road, Longhua District, Shenzhen, China Test specification ...........................: Standard ........................................... : FCC Part 15.247: Operation within the bands 902-928 MHz, 2400- 2483.5 MHz and 5725-5850 MHz TRF Originator .................................. : Shenzhen Global Test Service Co.,Ltd. Master TRF ....................................... : Dated 2014-12 Shenzhen Global Test Service Co.,Ltd. All rights reserved. This publication may be reproduced in whole or in part for non-commercial purposes as long as the Shenzhen Global Test Service Co.,Ltd. is acknowledged as copyright owner and source of the material. Shenzhen Global Test Service Co.,Ltd. takes no responsibility for and will not assume liability for damages resulting from the reader's interpretation of the reproduced material due to its placement and context. Test item description .....................: Mini wifi camera Trade Mark ....................................... : N/A Manufacturer .................................... : Ausek Limited Model/Type reference....................... : AS-B101 Listed Models .................................. : N/A Operation Frequency ........................ : From 2412MHz to 2462MHz Hardware Version ............................ : N/A Software Version .............................. : N/A Rating ............................................... : DC 3.7V by battery Recharged by DC 5.0V Result................................................ : PASS Report No.: GTS20260616001-1-02 Page 2 of 25 T E S T R E P O R T Test Report No. : GTS20260616001-1-02 Jul.07, 2026 ____________________________________________________________________________________ Date of issue Equipment under Test : Mini wifi camera Model /Type : AS-B101 Listed model : N/A Applicant : Ausek Limited Address : No.4 Building, Jianjin Business Park, Donghuan second Road, Longhua District, Shenzhen, China Manufacturer : Ausek Limited Address : No.4 Building, Jianjin Business Park, Donghuan second Road, Longhua District, Shenzhen, China Test Result: PASS The test report merely corresponds to the test sample. It is not permitted to copy extracts of these test result without the written permission of the test laboratory. Report No.: GTS20260616001-1-02 Page 3 of 25 Contents 1. TEST STANDARDS ......................................................................................................................................... 4 2. SUMMARY ....................................................................................................................................................... 5 2.1. General Remarks ................................................................................................................................... 5 2.2. Product Description ................................................................................................................................ 5 2.3. Equipment Under Test ........................................................................................................................... 6 2.4. Short description of the Equipment under Test (EUT) ........................................................................... 6 2.5. EUT operation mode .............................................................................................................................. 6 2.6. Block Diagram of Test Setup .....................................…

Text truncated - open the document above for the full version.