2BCMP-AT-G104vlog camera

FCC Caution: This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. Any changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment. NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules . These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures: -- Reorient or relocate the receiving antenna. -- Increase the separation between the equipment and receiver. -- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. -- Consult the dealer or an experienced radio/TV technician for help. The device has been evaluated to meet general RF exposure requirement. The device can be used in portable exposure condition without restriction.

LocalRepresentativeLetter ForCertificationServiceintheUSA FederalCommunicationsCommission EquipmentAuthorizationDivision,ApplicationProcessingBranch 7435OaklandMillsRoad Columbia,MD21048 Towhomitmayconcern PursuanttoSection2.911(d)(7),oftheCommission’sRules(47C.F.R.)weattestasfollowsfor theproductlistedbelow: FCCIDModelname 2BCMP-AT-G104AT-G104,AT-J104,AT-Q104 Weherebyacknowledgeasfollows: i.bothsigneesconfirmthatthepointofcontactacceptsresponsibilitytoactasaUS- AmericanRepresentativeonbehalfoftheapplicant ii.thepointofcontactprovidesthephysicalU.S.addressandemailaslistedbelow iii.bothpartiesmaintaintherequirementsofthisagreementwithoutexpirationdate US-AmericanPointofContactApplicant/ApprovalHolder SignatureSignature CompanyName:LOBOSIOWAINCAusekLimited FRN:00364139610034165829 ContactName:HarleyLiSarahTang Address:4623BittercreekDrColorado SpringsCO80922US No.4Building,JianjinBusiness Park,DonghuansecondRoad, LonghuaDistrict,Shenzhen,China Phone:+18188180538+8613927439912 Email:[email protected]@ausek.com

CoveredEquipmentAttestationLetter ForCertificationServiceintheUSA FederalCommunicationsCommission EquipmentAuthorizationDivision,ApplicationProcessingBranch 7435OaklandMillsRoad Columbia,MD21048 Towhomitmayconcern PursuanttoSection2.911(d)(5)(i)-(ii)oftheCommission’sRules(47C.F.R.)weattestas followsfortheproductlistedbelow: FCCIDModelname 2BCMP-AT-G104AT-G104,AT-J104,AT-Q104 We, Applicant CompanyName:AusekLimited Address:No.4Building,JianjinBusinessPark, DonghuansecondRoad,Longhua District,Shenzhen,China Phone:N/A certifythattheequipmentforwhichauthorizationissoughtisnot“covered”equipment prohibitedfromreceivinganequipmentauthorizationpursuanttosection2.903oftheFCC rules.Thisincludesthecybersecurityandanti-virussoftwareproducedorprovidedby KasperskyLab,Inc.oranyofistsuccessorsandassignees. Wecertifythat,asofthedateofthefilingoftheapplication,theapplicantisnotidentified ontheCoveredListasanentityproducing“covered”equipment. Ifyouhaveanyquestions,pleasefeelfreetocontactusattheaddressshownbelow. Sincerely, 2026-05-25 SignatureDate PrintedNameofSignee:SarahTang Company:AusekLimited Phone:+8613927439912 Email:[email protected] Address:No.4Building,JianjinBusinessPark, DonghuansecondRoad,Longhua District,Shenzhen,China Fax:N/A

AusekLimited No.4Building,JianjinBusinessPark,DonghuansecondRoad,LonghuaDistrict,Shenzhen, China Date:2026-05-25 FCCID:2BCMP-AT-G104 ModelNumber:AT-G104,AT-J104,AT-Q104 To:FederalCommunicationCommission AuthorizationandEvaluationDivision7435OaklandMillsRoad Columbia,MD21048 ToWhomItMayConcern, We,AusekLimitedherebydeclarethatourproduct(vlogcamera ) Model Number:AT-G104,AT-J104,AT-Q104electricalidentical,theSchematic,PCBlayout, structureandsoftwarearesame,theonlydifferencebetweenthesemodelsisthecolorof thehousing. Shouldyouhaveanyquestionsorcommentsregardingthismatter,pleasehave mybestattention. Sincerely, (Signed) Name/Title:SarahTang/Manager Company:AusekLimited Address:No.4Building,JianjinBusinessPark,DonghuansecondRoad,Longhua District,Shenzhen,China Phone:+8613927439912 FaxNumber:N/A E-Mail:[email protected]

ConfidentialityRequestLetter ForCertificationServiceintheUSA FederalCommunicationCommission EquipmentAuthorizationDivision,ApplicationProcessingBranch 7435OaklandMillsRoad Columbia,MD21048 Towhomitmayconcern PursuanttoParagraphs§0.457and0.459oftheCommission’sRules(47C.F.R.)andSection §552(b)(4)oftheFreedomofInformationAct,werequestconfidentialityforthe documentationofthefollowingproducts: FCCIDModelname 2BCMP-AT-G104AT-G104,AT-J104,AT-Q104 Fortheproductslistedabove,werequestpermanentconfidentialityforallapplicable exhibitsasthereare:  theOperationalDescription  theBlockDiagram theSchematics Theabovelistedexhibitscontaintradesecretsandproprietaryinformationthatcouldbeof benefittoourcompetitors. Ifyouhaveanyquestions,pleasefeelfreetocontactusattheaddressshownbelow. Sincerely, 2026-05-25 SignatureDate PrintedNameofSignee/Title:SarahTang/Manager Company:AusekLimited Address:No.4Building,JianjinBusinessPark,Donghuansecond Road,LonghuaDistrict,Shenzhen,China Phone:+8613927439912 Fax:-- Email:[email protected]

ReportNo.:CISRR26042345001 Page 59 of 63 9.EXTERNALANDINTERNALPHOTOS 9.1.ExternalPhotos ReportNo.:CISRR26042345001 Page 60 of 63

Label Size:30mm*20mm vlog camera Model No.:AT-G104 FCC ID: 2BCMP-AT- G104 Label Location

ReportNo.:CISRR26042345001 Page 61 of 63 9.2.InternalPhotos ReportNo.:CISRR26042345001 Page 62 of 63 ANT ReportNo.:CISRR26042345001 Page 63 of 63 ------Endofthereport-----

ReportNo.:CISRR26042345002 Reporttemplateversion:CISE-TR-001-A0Page:1of5 TESTREPORT RFExposureEvaluation ReportNo.CISRR26042345002 ProjectNo.CISR260423450 FCCID2BCMP-AT-G104 ApplicantAusekLimited Address No.4Buliding,JianjinindustrialPark,DonghuanSecond Road,LonghuaDistrict,Shenzhen,China ManufacturerAusekLimited Address No.4Buliding,JianjinindustrialPark,DonghuanSecond Road,LonghuaDistrict,Shenzhen,China ProductNamevlogcamera Trademark- Model/TypereferenceAT-G104 ListedModel(s)AT-J104,AT-Q104 Standard 47CFRPart2.1093 DateofsamplereceiptApril27,2026 TestdateApril27,2026toMay18,2026 IssuedateMay18,2026 TestresultComplied Reviewedby:LucasHuang Approvedby:HansHu Thetestresultsrelateonlytothetestedsamples. ThetestreportshouldnotbereproducedexceptinfullwithoutthewrittenapprovalofShenzhenBangceTesting TechnologyCo.,Ltd. ReportNo.:CISRR26042345002 Reporttemplateversion:CISE-TR-001-A0Page:2of5 1.APPLICABLESTANDARD 47CFRPart2.1093:Radiofrequencyradiationexposureevaluation:portabledevices ANSIC95.1–3999:IEEEStandardforSafetyLevelswithRespecttoHumanExposuretoRadioFrequency ElectromagneticFields,3kHzto300GHz. FCCKDBpublication447498D01GeneralRFExposureGuidancev06:MobileandPortableDevicesRF ExposureProceduresandEquipmentAuthorizationPolicies. 47CFRPart1.1307:Actionsthatmayhaveasignificantenvironmentaleffect,forwhichEnvironmental Assessments(EAs)mustbeprepared. 2.REPORTVERSION VersionNo.IssuedateDescription 00May18,2026Original ReportNo.:CISRR26042345002 Reporttemplateversion:CISE-TR-001-A0Page:3of5 3.RADIOSPECIFICATIONDESCRIPTION WIFI-2.4GHzBand Supportedtype:802.11b802.11g802.11n 802.11ax Note:PleaserefertoRFreportfordetailedtechnicalspecifications 4.SIMULTANEOUSTRANSMISSIONANALYSIS ThedeviceuseasingletransmittermoduleandantennaforWIFI,cannottransmitsimultaneously. ReportNo.:CISRR26042345002 Reporttemplateversion:CISE-TR-001-A0Page:4of5 5.TESTRESULT 5.1.Standalonetransmission Limit: KDB447498D01v06,Clause4.3.1a) For100MHzto6GHzandtestseparationdistances≤50mm,the1-gand10-g SARtestexclusionthresholdsaredeterminedbythefollowing: [(max.powerofchannel,includingtune-uptolerance,mW)/(min.testseparation distance,mm)]*[√f(GHz)]≤3.0for1-gSAR,and≤7.5for10-gextremitySAR,where f(GHz)istheRFchanneltransmitfrequencyinGHz PoweranddistanceareroundedtothenearestmWandmmbeforecalculation31The resultisroundedtoonedecimalplaceforcomparison Thevalues3.0and7.5arereferredtoasnumericthresholdsinstepb)below Thetestexclusionsareapplicableonlywhentheminimumtestseparationdistanceis≤50mm, andfortransmissionfrequenciesbetween100MHzand6GHz.Whentheminimumtest separationdistanceis<5mm,adistanceof5mmaccordingto4.1f)isappliedtodetermine SARtestexclusion. Result: Passed TestData Radiotype Frequency (GHz) Maximum output power #1 (dBm) Antenna gain #2 (dBi) Maximum EIRP #3 (dBm) Maximum tune-up #4 (dBm) Minimum distance (mm) Evaluated value LimitResult 2.4GWIFI2.4127.051.858.909.005.002.49273.00PASS Note #1:ThisvaluecomesfromtheRFtestreport. #2:Thisvalueisdeclaredbytheapplicant. #3:EIRP=Maximumoutputpower+Antennagain. #4:Thisvalueisdeclaredbytheapplicant. ReportNo.:CISRR26042345002 Reporttemplateversion:CISE-TR-001-A0Page:5of5 5.2.Simultaneoustransmission Limit: KDB447498D01v06,Clause4.3.2,47CFRPart1.1307 InthecaseofxedRFsourcesoperatinginthesametime-averagingperiod,orof multiplemobileorportableRFsourceswithinadeviceoperatinginthesametime averagingperiod,ifthesumofthefractionalcontributionstotheapplicablethresholds islessthanorequalto1asindicatedinthefollowingequation. Where a=numberoffxed,mobile,orportableRFsourcesclaimingexemptionusingparagraph (b)(3)(i)(B)ofthissectionforP,includingexistingexempttransmittersandthosebeing added. b=numberoffxed,mobile,orportableRFsourcesclaimingexemptionusingparagraph (b)(3)(i)(C)ofthissectionforThresholdERP,includingexistingexempttransmittersand thosebeingadded. c=numberofexistingfixed,mobile,orportableRFsourceswithknownevaluationforthespeci edminimumdistanceincludingexistingevaluatedtransmitters. P j =theavailablemaximumtime-averagedpowerortheERP,whicheverisgreater,forxed, mobile,orportableRFsourceiatadistancebetween0.5cmand40cm(inclusive). P th,j =theexemptionthresholdpower(P)accordingtoparagraph(b)(3)(i)(B)ofthissectionfor xed,mobile,orportableRFsourcei. ERP j =theERPoffixed,mobile,orportableRFsourcej. ERP th,j =exemptionthresholdERPforfixed,mobile,orportableRFsourcej,atadistanceofat leastλ/2πaccordingtotheapplicableformulaofparagraph(b)(3)(i)(C)ofthissection. Evaluated k =themaximumreportedSARorMPEoffixed,mobile,orportableRFsourcekeither inthedeviceoratthetransmittersitefromanexistingevaluationatthelocationofexposure. ExposureLimit k =eitherthegeneralpopulation/uncontrolledmaximumpermissibleexposure (MPE)orspecicabsorptionrate(SAR)limitforeachxed,mobile,orportableRFsourcek, asapplicablefrom§1.1310ofthischapter. Result:NotApplicable --------EndofReport--------

ReportNo.:CISRR26042345001 Thetestresultsrelateonlytothetestedsamples. ThetestreportshouldnotbereproducedexceptinfullwithoutthewrittenapprovalofShenzhenBangce TestingTechnologyCo.,Ltd. Page1of55 TESTREPORT ReportNo.CISRR26042345001 ProjectNo.CISR260423450 FCCID2BCMP-AT-G104 ApplicantAusekLimited Address No.4Buliding,JianjinindustrialPark,DonghuanSecond Road,LonghuaDistrict,Shenzhen,China ManufacturerAusekLimited Address No.4Buliding,JianjinindustrialPark,DonghuanSecond Road,LonghuaDistrict,Shenzhen,China ProductNamevlogcamera Trademark- Model/TypereferenceAT-G104 ListedModel(s)AT-J104,AT-Q104 Standard 47CFRPart15.247 DateofsamplereceiptApril27,2026 TestdateApril27,2026toMay18,2026 IssuedateMay18,2026 TestresultComplied Reviewedby:LucasHuang Approvedby:HansHu ReportNo.:CISRR26042345001 Page 2 of 55 Contents 1.STANDARDANDAPPLICABLETESTMETHODS........................................................................................3 2.REPORTVERSION..........................................................................................................................................3 3.TESTDESCRIPTION.......................................................................................................................................4 4.SUMMARY........................................................................................................................................................5 4.1.ProductDescription*..................................................................................................................................5 4.2.RadioSpecificationDescription*..............................................................................................................5 4.3.ModificationofEUT.....................................................................................................................................5 4.4.Deviationfromstandards...........................................................................................................................6 4.5.TestingSite...................................................................................................................................................6 5.TESTCONFIGURATION.................................................................................................................................7 5.1.Testfrequencylist.......................................................................................................................................7 5.2.Descriptionsoftestmode...........................................................................................................................7 5.3.Testsampleinformation.............................................................................................................................7 5.4.Environmentalconditions...........................................................................................................................7 5.5.Statementofthemeasurementuncertainty.............................................................................................7 5.6.EquipmentUsedduringtheTest................................................................................................................8 6.TESTRESULTS.............................................................................................................................................10 6.1.EvaluationResults(Evaluation)...............................................................................................................10 6.1.1.AntennaRequirement............................................................................................................................10 6.2.RadioSpectrumMatterTestResults(RF)...............................................................................................11 6.2.1.ConductedEmissionatACpowerline.................................................................................................11 6.2.2.6dBBandwidth........................................................................................................................................15 6.2.3.MaximumConductedOutputPower.....................................................................................................17 6.2.4.PowerSpectralDensity..........................................................................................................................18 6.2.5.Conductedbandedgeandspuriousemission...................................................................................19 6.2.6.Radiatedbandedgeemission...............................................................................................................20 6.2.7.RadiatedSpuriousEmission(below1GHz).........................................................................................26 6.2.8.RadiatedSpuriousEmission(Above1GHz)........................................................................................30 7.APPENDIXREPORT......................................................................................................................................38 7.1.ConductedPeakOutputPower................................................................................................................38 7.2.6dBBandwidth...........................................................................................................................................41 7.3.PowerSpectralDensity.............................................................................................................................44 7.4.DutyCycle..................................................................................................................................................47 7.5.ConductedSpurious&BandEdgeEmission.........................................................................................50 ReportNo.:CISRR26042345001 Page 3 of 55 1.STANDARDANDAPPLICABLETESTMETHODS Thetestswereperformedaccordingtofollowingstandards: 47CFRPart15.247:Operationwithintheband…

Text truncated - open the document above for the full version.

ReportNo.:CISRR26042345001 Page 41 of 55 7.2. 6dBBandwidth TestResult ModeChannelAnt. Center Frequency (MHz) 6dB Bandwidth (MHz) Limit (MHz) Result IEEE802.11b 1 0 24128.490 ≥0.5 PASS 624377.810PASS 1124627.840PASS IEEE802.11g 1241213.17PASS 6243714.34PASS 11246215.24PASS IEEE 802.11n_20 1241214.10PASS 6243713.28PASS 11246212.89PASS IEEE 802.11n_40 3242234.02PASS 6243735.14PASS 9245228.70PASS TestGraphs IEEE802.11b_Channel1_20MHz_Antenna0IEEE802.11b_Channel6_20MHz_Antenna0 IEEE802.11b_Channel11_20MHz_Antenna0IEEE802.11g_Channel1_20MHz_Antenna0 ReportNo.:CISRR26042345001 Page 42 of 55 IEEE802.11g_Channel6_20MHz_Antenna0IEEE802.11g_Channel11_20MHz_Antenna0 IEEE802.11n_Channel1_20MHz_Antenna0IEEE802.11n_Channel6_20MHz_Antenna0 IEEE802.11n_Channel11_20MHz_Antenna0IEEE802.11n_Channel3_40MHz_Antenna0 ReportNo.:CISRR26042345001 Page 43 of 55 IEEE802.11n_Channel6_40MHz_Antenna0IEEE802.11n_Channel9_40MHz_Antenna0 ReportNo.:CISRR26042345001 Page 44 of 55 7.3. PowerSpectralDensity TestResult ModeChannel PSD (dBm/3kHz) Ant.0 Limit (dBm/3kHz) Result IEEE802.11b 1-19.010 ≤8 PASS 6-19.080PASS 11-18.850PASS IEEE802.11g 1-25.150PASS 6-24.270PASS 11-25.140PASS IEEE802.11n_20 1-24.700PASS 6-25.700PASS 11-25.630PASS IEEE802.11n_40 3-29.110PASS 6-30.050PASS 9-28.000PASS TestGraphs IEEE802.11b_Channel1_20MHz_Antenna0IEEE802.11b_Channel6_20MHz_Antenna0 IEEE802.11b_Channel11_20MHz_Antenna0IEEE802.11g_Channel1_20MHz_Antenna0 ReportNo.:CISRR26042345001 Page 45 of 55 IEEE802.11g_Channel6_20MHz_Antenna0IEEE802.11g_Channel11_20MHz_Antenna0 IEEE802.11n_Channel1_20MHz_Antenna0IEEE802.11n_Channel6_20MHz_Antenna0 IEEE802.11n_Channel11_20MHz_Antenna0IEEE802.11n_Channel3_40MHz_Antenna0 ReportNo.:CISRR26042345001 Page 46 of 55 IEEE802.11n_Channel6_40MHz_Antenna0IEEE802.11n_Channel9_40MHz_Antenna0 ReportNo.:CISRR26042345001 Page 47 of 55 7.4. DutyCycle TestResult Mode Data rates ChannelAntenna OnTime (ms) Period (ms) Duty Cycle (%) Duty Cycle (linear) Duty Cycle Factor (dB) 1/T IEEE 802.11b 1 1 1 8.3198.34899.650.99650.01520.1202 68.3408.36999.660.99660.01480.1199 118.3198.34799.660.99660.01480.1202 IEEE 802.11g 11.3961.42997.690.97690.10150.7163 61.3961.42997.690.97690.10150.7163 111.3961.42997.690.97690.10150.7163 IEEE 802.11n_20 MCS0 11.3041.33797.530.97530.10860.7669 61.3041.33797.530.97530.10860.7669 111.2921.32797.420.97420.11350.7740 IEEE 802.11n_40 30.6500.68594.960.94960.22461.5385 60.6500.68495.030.95030.22141.5385 90.6500.68595.020.95020.22181.5385 TestGraphs IEEE802.11b_20MHz_Channel1IEEE802.11b_20MHz_Channel6 IEEE802.11b_20MHz_Channel11IEEE802.11g_20MHz_Channel1 ReportNo.:CISRR26042345001 Page 48 of 55 IEEE802.11g_20MHz_Channel6IEEE802.11g_20MHz_Channel11 IEEE802.11n_20MHz_Channel1IEEE802.11n_20MHz_Channel6 IEEE802.11n_20MHz_Channel11IEEE802.11n_40MHz_Channel3 ReportNo.:CISRR26042345001 Page 49 of 55 IEEE802.11n_40MHz_Channel6IEEE802.11n_40MHz_Channel9 ReportNo.:CISRR26042345001 Page 50 of 55 7.5. ConductedSpurious&BandEdgeEmission TestResult ModeChannelAnt. OOB Emission Frequency (MHz) OOB Emission Level (dBm) Limit (dBm) OverLimit (dB) Result IEEE 802.11b 1 0 2380.83-32.657-25.31-7.347PASS 2400.00-34.850-25.31-9.540PASS 22017.3-38.580-25.31-13.270PASS 620053.0-38.723-25.53-13.193PASS 11 2483.50-33.040-25.22-7.820PASS 6153.89-38.722-25.22-13.502PASS IEEE 802.11g 1 2394.57-41.340-31.58-9.760PASS 2400.00-43.920-31.58-12.340PASS 6990.40-38.929-31.58-7.349PASS 66917.97-38.668-29.72-8.948PASS 11 2483.50-44.300-31.71-12.590PASS 5853.42-38.484-31.71-6.774PASS IEEE 802.11n_20 1 2400.00-41.960-30.65-11.310PASS 6923.80-38.846-30.65-8.196PASS 621463.0-39.160-32.5-6.660PASS 11 2483.50-44.050-31.79-12.260PASS 22039.8-38.936-31.79-7.146PASS IEEE 802.11n_40 3 2310.85-41.646-34.6-7.046PASS 2400.00-43.630-34.6-9.030PASS 21774.3-38.564-34.6-3.964PASS 66912.98-38.781-32.81-5.971PASS 9 2483.50-44.330-34.18-10.150PASS 6999.54-38.460-34.18-4.280PASS Note:inputcompensationcoeffcient(dB)=CableLoss(dB) TestGraphs In-BandReferenceLevel IEEE802.11b_Channel1_20MHz_Antenna0 OutOfBandEmission IEEE802.11b_Channel1_20MHz_Antenna0 ReportNo.:CISRR26042345001 Page 51 of 55 30.0MHz-25000.0MHz IEEE802.11b_Channel1_20MHz_Antenna0 In-BandReferenceLevel IEEE802.11b_Channel6_20MHz_Antenna0 30.0MHz-25000.0MHz IEEE802.11b_Channel6_20MHz_Antenna0 In-BandReferenceLevel IEEE802.11b_Channel11_20MHz_Antenna0 OutOfBandEmission IEEE802.11b_Channel11_20MHz_Antenna0 30.0MHz-25000.0MHz IEEE802.11b_Channel11_20MHz_Antenna0 ReportNo.:CISRR26042345001 Page 52 of 55 In-BandReferenceLevel IEEE802.11g_Channel1_20MHz_Antenna0 OutOfBandEmission IEEE802.11g_Channel1_20MHz_Antenna0 30.0MHz-25000.0MHz IEEE802.11g_Channel1_20MHz_Antenna0 In-BandReferenceLevel IEEE802.11g_Channel6_20MHz_Antenna0 30.0MHz-25000.0MHz IEEE802.11g_Channel6_20MHz_Antenna0 In-BandReferenceLevel IEEE802.11g_Channel11_20MHz_Antenna0 ReportNo.:CISRR26042345001 Page 53 of 55 OutOfBandEmission IEEE802.11g_Channel11_20MHz_Antenna0 30.0MHz-25000.0MHz IEEE802.11g_Channel11_20MHz_Antenna0 In-BandReferenceLevel IEEE802.11n_Channel1_20MHz_Antenna0 OutOfBandEmission IEEE802.11n_Channel1_20MHz_Antenna0 30.0MHz-25000.0MHz IEEE802.11n_Channel1_20MHz_Antenna0 In-BandReferenceLevel IEEE802.11n_Channel6_20MHz_Antenna0 ReportNo.:CISRR26042345001 Page 54 of 55 30.0MHz-25000.0MHz IEEE802.11n_Channel6_20MHz_Antenna0 In-BandReferenceLevel IEEE802.11n_Channel11_20MHz_Antenna0 OutOfBandEmission IEEE802.11n_Channel11_20MHz_Antenna0 30.0MHz-25000.0MHz IEEE802.11n_Channel11_20MHz_Antenna0 In-BandReferenceLevel IEEE802.11n_Channel3_40MHz_Antenna0 OutOfBandEmission IEEE802.11n_Channel3_40MHz_Antenna0 ReportNo.:CISRR26042345001 Page 55 of 55 30.0MHz-25000.0MHz IEEE802.11n_Channel3_40MHz_Antenna0 In-BandReferenceLevel IEEE802.11n_Channel6_40MHz_Antenna0 30.0MHz-25000.0MHz IEEE802.11n_Channel6_40MHz_Antenna0 In-BandReferenceLevel IEEE802.11n_Channel9_40MHz_Antenna0 OutOfBandEmission IEEE802.11n_Channel9_40MHz_Antenna0 30.0MHz-25000.0MHz IEEE802.11n_Channel9_40MHz_Antenna0 ------Endofthereport-----

2.4GHz3216ChipAntenna:3216C03 _ Application: WLAN,802.11b/g,Bluetooth,WLAN,etc... Features SMD,highreliability,ultraImpact,Omni-directional... PartnumberInformation RANT3216F245C03 (A)(B)(C)(D)(E)(F) ElectricalSpecification ThespecificationisdefinedonEVB. DimensionandTerminalConfiguration No.TerminalName 1Feeding/GNG 2GND/Feeding (A)ProductTypeChipAntenna (B)SizeCode 3.2x1.6mm( ± 0.2mm) (C)MaterialHighKmaterial (D)Frequency2.4~2.5GHz (E)FeedingmodePIFA&SingleFeeding (F)AntennatypeType=0X WorkingFrequencyRange2400~2500MHz Bandwidth120MHz(Min.) PeakGain1.85dBi(Typ.) Impedance50Ohm Returnloss10dB(Min) PolarizationLinear AzimuthBeamwidthOmni-directional OperationTemperature(°C)-40~85°C ResistancetoSolderingHeats 10sec.(@280°C) TerminationNi/Au(Leadless) Dimension(mm) L 3.20±0.20 W 1.60±0.20 T 0.45±0.20 深圳市亿圣邦科技有限公司 Shenzhen Yishengbang Technology Co., Ltd. Room 101, Building C, Qianwan Hard Technology Industrial Park, Nanchang Community, Xixiang Subdistrict, Bao'an District, Shenzhen 電話:18666299104 2.4GHz3216ChipAntenna:3216C03 _ 1 EvaluationBoardReference PCBDimensionAntennaLayoutReference Unit:mm ElectricalCharacteristics ReturnLoss&Radiation ReturnLoss Frequency(MHz) S11(dB) 2400-10.50 2450-30.62 2500-11.47 Radiation 2400MHz2450MHz2500MHz Efficiency82.52%85.26%83.01% X Y Z 2400MHz 2450MHz 2500MHz 2.4GHz3216ChipAntenna:3216C03 _ TapingSpecifications ReelandTapingSpecification ReelSpecification TYPESIZEABCD 32167”5K/Reel 9.0±0.5 60±213.5±0.5178±2 TappingSpecification PackagingTypeABWEFGHTψDP PaperType3216 1.90±0.203.50±0.208.0±0.201.75±0.103.5±0.054.0±0.102.0±0.050.75±0.10 1.50±0.10 4.0±0.1 2.4GHz3216ChipAntenna:3216C03 _ ReliabilityTable TestItemProcedure Requirements CeramicType Remark (Reference) Electrical Characterization Fulfilltheelectrical specification UserSpec. Thermal Shock 1.Preconditioning: 50±10°C/1hr,thenkeepfor24±1hrsatroomtemp. 2.Initialmeasure:Spec:referInitialspec. 3.Rapidchangeoftemperaturetest: -30°Cto+85°C;100cycles; 15minutesatLowercategorytemperature; 15minutesatUppercategorytemperature. NoVisibleDamage. Fulfilltheelectrical specification. MIL-STD-202 107 Temperature Cycling 1.Initialmeasure:Spec:referInitialspec. 2.100Cycles(-30°Cto+85°C),SoakMode=1(2Cycle/hours). 3.Measurementat24±2Hoursaftertestcondition. NoVisibleDamage. Fulfilltheelectrical specification. JESD22 JA104 HighTemperature Exposure 1.Initialmeasure:Spec:referInitialspec. 2.Unpowered;500hours@T=+85°C. 3.Measurementat24±2hoursaftertest. NoVisibleDamage. Fulfilltheelectrical specification. MIL-STD-202 108 LowTemperature Storage 1.Initialmeasure:Spec:referInitialspec. 2.Unpowered:500hours@T=-30°C. 3.Measurementat24±2hoursaftertest. NoVisibleDamage. Fulfilltheelectrical specification. MIL-STD-202 108 Solderability (SMDBottomSide) Dippingmethod: a.Temperature:235±5°C b.Dippingtime:3±0.5s Thesoldershouldcover over95%ofthecritical areaofbottomside. IEC60384-21/22 4.10 SolderingHeat Resistance (RSH) Preheatingtemperature:150±10°C. Preheatingtime:1~2min. Soldertemperature:260±5°C. Dippingtime:5±0.5s NoVisibleDamage.IEC60384-21/22 4.10 Vibration5g'sfor20min.,12cycleseachof3orientations Note:Use8"X5"PCB.031"thick7securepointson,onelong sideand2securepointsatcornersofoppositesides.Parts mountedwithin2"fromanysecurepoint.Testfrom10-2000 Hz. NoVisibleDamage.MIL-STD-202 Method204 Mechanical Shock Threeshocksineachdirectionshallbeappliedalongthethree mutuallyperpendicularaxesofthetestspecimen(18shocks) Peakvalue:1,500g’s Duration:0.5ms Velocitychange:15.4ft/s Waveform:Half-sine NoVisibleDamage.MIL-STD-202 Method213 Humidity Bias 1.Humidity:85%R.H.,Temperature:85±2°C. 2.Time:500±24hours. 3.Measurementat24±2hrsaftertestcondition. NoVisibleDamage. Fulfilltheelectrical specification. MIL-STD-202 Method106 2.4GHz3216ChipAntenna:3216C03 _ Board Flex (SMD) 1.Mountingmethod: IR-Reflow.PCBSize(L:100×W:40×T:1.6mm) 2.Applytheloadindirectionofthearrowuntilbendingreaches 2mm. NoVisibleDamage.AEC-Q200 005 AdhesionForceof1.8Kgfor60seconds.NoVisibleDamage Magnificationof20Xor greatermaybeemployed forinspectionofthe mechanicalintegrityofthe devicebodyterminalsand body/terminaljunction. AEC-Q200 006 Physical Dimension Anyapplicablemethodusingx10magnification,micrometers, calipers,gauges,contourprojectors,orothermeasuring equipment,capableofdeterminingtheactualspecimen dimensions. Inaccordancewith specification. JESD22 JB100

ReportNo.:CISRR26042345001 Page 57 of 63 8.TESTSETUPPHOTOS ConductedEmissionatACpowerline Radiatedbandedgeemission RadiatedSpuriousEmission(Above1GHz) ReportNo.:CISRR26042345001 Page 58 of 63 RadiatedSpuriousEmission(below1GHz)