2BCVOTP-C30PISEN - 2-in-1 Night Light Wireless Charging Stand

FCC Statement This device complies with part 15 and part 18 of the FCC Rules. Operation is Subject To the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. Changes or modifications not explicitly approved by the party responsible for compliance could void the user's authority to operate this equipment. Note: this equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 and part 18 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and candidate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures: • Reorient or relocate the receiving antenna. • Increase the separation between the equipment and receiver. • Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. • Consult the dealer or an experienced radio/TV technician for help. The equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment. During the operation of device a distance of 15 cm surrounding the device and 20 cm above the top surface of the device must be respected.

Covered Equipment Identification Letter For Certification Service in the USA Federal Communication Commission Equipment Authorization Division, Application Processing Branch 7435 Oakland Mills Road Columbia, MD 21048 To whom it may concern Pursuant to Section 2.911(d)(5)(ii) of the Commission’s Rules (47 C.F.R.) we attest as follows: We, applicant Company Name: Guangdong Pisen Electronics Co., Ltd. Address: Building 5, 1st Floor, No. 9, Qinfu 1st Street, Liuyue Nan Community, Henggang Town, Longgang District, Shenzhen City, Guangdong Province, China Phone: +86-755-28508800-8860 certify that, as of the date of the filing of the application, the applicant is not identified on the Covered List as an entity producing “covered” equipment. FCC ID: 2BCVOTP-C30 If you have any questions, please feel free to contact us at the address shown below. Sincerely, Signature Date:2024-06-19 Name / Title: Zhang Zhang / Manager Company: Guangdong Pisen Electronics Co., Ltd. Address: Building 5, 1st Floor, No. 9, Qinfu 1st Street, Liuyue Nan Community, Henggang Town, Longgang District, Shenzhen City, Guangdong Province, China Phone: +86-755-28508800-8860 E-Mail: [email protected]

Covered Equipment Attestation Letter For Certification Service in the USA Federal Communication Commission Equipment Authorization Division, Application Processing Branch 7435 Oakland Mills Road Columbia, MD 21048 To whom it may concern Pursuant to Section 2.911(d)(5)(i)-(ii) of the Commission’s Rules (47 C.F.R.) we attest as follows for the product listed below: FCC ID Model name 2BCVOTP-C30 TP-C30 We, applicant Company Name: Guangdong Pisen Electronics Co., Ltd. Address: Building 5, 1st Floor, No. 9, Qinfu 1st Street, Liuyue Nan Community, Henggang Town, Longgang District, Shenzhen City, Guangdong Province, China Phone: +86-755-28508800-8860 certify that the equipment for which authorization is sought is not “covered” equipment prohibited from receiving an equipment authorization pursuant to section 2.903 of the FCC rules. If you have any questions, please feel free to contact us at the address shown below. Sincerely, Signature Date:2024-06-19 Name / Title: Zhang Zhang / Manager Company: Guangdong Pisen Electronics Co., Ltd. Address: Building 5, 1st Floor, No. 9, Qinfu 1st Street, Liuyue Nan Community, Henggang Town, Longgang District, Shenzhen City, Guangdong Province, China Phone: +86-755-28508800-8860 E-Mail: [email protected]

Confidentiality Request Letter For Certification Service in the USA Federal Communication Commission Equipment Authorization Division, Application Processing Branch 7435 Oakland Mills Road Columbia, MD 21048 To whom it may concern Pursuant to Paragraphs §0.457 and 0.459 of the Commission’s Rules (47 C.F.R.) and Section §552(b)(4) of the Freedom of Information Act, we request confidentiality for the documentation of the following products: FCC ID Model name 2BCVOTP-C30 TP-C30 For the products listed above, we request permanent confidentiality for all applicable exhibits as there are:  the Operational Description  the Block Diagram  the Schematics The above listed exhibits contain trade secrets and proprietary information that could be of benefit to our competitors. If you have any questions, please feel free to contact us at the address shown below. Sincerely, Signature Date:2024-06-19 Name / Title: Zhang Zhang / manager Company: Guangdong Pisen Electronics Co., Ltd. Address: Building 5, 1st Floor, No. 9, Qinfu 1st Street, Liuyue Nan Community, Henggang Town, Longgang District, Shenzhen City, Guangdong Province, China Phone: 0755-28508800-8860 E-Mail: [email protected]

Guangdong Pisen Electronics Co., Ltd. Building 5, 1st Floor, No. 9, Qinfu 1st Street, Liuyue Nan Community, Henggang Town, Longgang District, Shenzhen City, Guangdong Province, China Date: June 19, 2024 FCC ID: 2BCVOTP-C30 Model Number: TP-C30 To: Federal Communication Commission Authorization and Evaluation Division 7435 Oakland Mills Road Columbia, MD 21048 To Whom It May Concern, We, Guangdong Pisen Electronics Co., Ltd. hereby declare that our product (PISEN - 2-in-1 Night Light Wireless Charging Stand) Model Number: TP-C30 meet item 5.2 of KDB 680106v03r01 as follow; Requirements of KDB 680106 D01 Yes / No Description Power transfer frequency is less than 1 MHz Yes The device operates in the frequency range 115.0 KHz - 205 KHz The output power from each transmitting element (e.g., coil) is less than or equal to 15 watts. Yes The maximum output power of each primary coil is 15W. A client device providing the maximum permitted load is placed in physical contact with the transmitter (i.e., the surfaces of the transmitter and client device enclosures need to be in physical contact) Yes Client device is placed directly in contact with the transmitter. Only § 2.1091- Mobile exposure conditions apply (i.e., this provision does not cover § 2.1093-Portable exposure conditions). Yes Mobile exposure conditions only The E-field and H-field strengths, at and beyond 20 cm surrounding the device surface, are demonstrated to be less than 50% of the applicable MPE limit, per KDB 447498, Table 1. These measurements shall be taken along the principal axes of the device, with one axis oriented along the direction of the estimated maximum field strength, and for three points per axis or until a 1/d (inverse distance from the emitter structure) field strength decay is observed. Symmetry considerations may be used for test reduction purposes. The device Yes The EUT H-field strengths at 15 cm surrounding the device and 20 cm above the top surface from all simultaneous transmitting coils are demonstrated to be less than 50% of the MPE limit. Guangdong Pisen Electronics Co., Ltd. Building 5, 1st Floor, No. 9, Qinfu 1st Street, Liuyue Nan Community, Henggang Town, Longgang District, Shenzhen City, Guangdong Province, China shall be operated in documented worst-case compliance scenarios (i.e., the ones that lead to the maximum field components), and while all the radiating structures (e.g., coils or antennas) that by design can simultaneously transmit are energized at their nominal maximum power. For systems with more than one radiating structure, the conditions specified in (5) must be met when the system is fully loaded (i.e., clients absorbing maximum power available), and with all the radiating structures operating at maximum power at the same time, as per design conditions. If the design allows one or more radiating structures to be powered at a higher level while other radiating structures are not powered, then those cases must be tested as well. For instance, a device may use three RF coils powered at 5 W, or one coil powered at 15 W: in this case, both scenarios shall be tested Yes Only one radiating structure and tested at maximum Output Power Please contact me if you have any question. Sincerely, (Signed) Name / Title: Zhang Zhang / Manager Company: Guangdong Pisen Electronics Co., Ltd. Address: Building 5, 1st Floor, No. 9, Qinfu 1st Street, Liuyue Nan Community, Henggang Town, Longgang District, Shenzhen City, Guangdong Province, China Phone: +86-755-28508800-8860 E-Mail: [email protected]

FCC ID: 2BCVOTP-C30 Fig. 1 Fig. 2 FCC ID: 2BCVOTP-C30 Fig. 3 Fig. 4 FCC ID: 2BCVOTP-C30 Fig. 5 Fig. 6

_____________________________________________________________________________________________________ LABEL AND LOCATION (Size: L3.78cm x 3.59cm) Label Location

FCC ID: 2BCVOTP-C30 Fig. 1 Fig. 2 FCC ID: 2BCVOTP-C30 Fig. 3 Fig. 4 Antenna 1 FCC ID: 2BCVOTP-C30 Fig. 5 Fig. 6 FCC ID: 2BCVOTP-C30 Fig. 7 Fig. 8 Antenna 2

Shenzhen CTA Testing Technology Co., Ltd. Room 106, Building 1, Yibaolai Industrial Park, Qiaotou Community, Fuhai Street, Bao’an District, Shenzhen, China TEST REPOR Report Reference No. .....................: FCC ID ............................................... CTA24053000202 2BCVOTP-C30 Compiled by ( position+printed name+signature) .. : File administrators Jinghua Xiao Supervised by ( position+printed name+signature) .. : Test Engineer Lushan Kong Approved by ( position+printed name+signature) .. : Manager Eric Wang Date of issue ..................................... : Jun 05, 2024 Representative Laboratory Name . : Shenzhen CTA Testing Technology Co., Ltd. Address ............................................ : Room 106, Building 1, Yibaolai Industrial Park, Qiaotou Community, Fuhai Street, Bao‘an District, Shenzhen, China Applicant’s name ............................ : Guangdong Pisen Electronics Co., Ltd. Address ............................................ : Building 5, 1st Floor, No. 9, Qinfu 1st Street, Liuyue Nan Community, Henggang Town, Longgang District, Shenzhen City, Guangdong Province, China Test specification ...........................: Standard ........................................... : FCC KDB 680106 D01 Shenzhen Global Test Service Co.,Ltd. All rights reserved. This publication may be reproduced in whole or in part for non-commercial purposes as long as the Shenzhen Global Test Service Co.,Ltd. is acknowledged as copyright owner and source of the material. Shenzhen Global Test Service Co.,Ltd. takes no responsibility for and will not assume liability for damages resulting from the reader's interpretation of the reproduced material due to its placement and context. Test item description .....................: PISEN - 2-in-1 Night Light Wireless Charging Stand Trade Mark ....................................... : PISEN Manufacturer .................................... : Guangdong Pisen Electronics Co., Ltd. Model/Type reference....................... : TP-C30 List Model ......................................... : N/A Modulation Type ............................... : ASK Operation Frequency ........................ : 115-205KHz Ratings ............................................. : Input:Type-C:DC5.0V/2.0A, 9.0V/2.0A, 12.0V/3.0A Wireless Output 1: Wireless Charging for Phones (Magnetic Attachment):5W/7.5W/10W/15W Wireless Output 2: Wireless Charging for Phones (Desktop):5W/7.5W/10W/15W or Wireless Charging for Earphones:5W Total Output: 15W Result................................................ : PASS Report No.: CTA24053000202 Page 2 of 17 T E S T R E P O R T Test Report No. : CTA24053000202 Jun 05, 2024 ______________________________________________________________________________________________ Date of issue Equipment under Test : PISEN - 2-in-1 Night Light Wireless Charging Stand Model /Type : TP-C30 Listed Models : N/A Applicant : Guangdong Pisen Electronics Co., Ltd. Address : Building 5, 1st Floor, No. 9, Qinfu 1st Street, Liuyue Nan Community, Henggang Town, Longgang District, Shenzhen City, Guangdong Province, China Manufacturer Guangdong Pisen Electronics Co., Ltd. Address : Building 5, 1st Floor, No. 9, Qinfu 1st Street, Liuyue Nan Community, Henggang Town, Longgang District, Shenzhen City, Guangdong Province, China Test Result: PASS The test report merely corresponds to the test sample. It is not permitted to copy extracts of these test result without the written permission of the test laboratory. Report No.: CTA24053000202 Page 3 of 17 Contents 1. S U M M A R Y .................................................................................. 4 1.1. General Remarks ......................................................................................................................................... 4 1.2. Product Description .................................................................................................................................... 4 1.3. Equipment Under Test ................................................................................................................................ 5 1.4. Modifications ............................................................................................................................................... 6 1.5. Address of the test laboratory ................................................................................................................... 6 1.6. Test Facility .................................................................................................................................................. 6 1.7. Statement of the measurement uncertainty ............................................................................................. 6 1.8. TEST STANDARDS ...................................................................................................................................... 6 1.9. Equipments Used during the Test ............................................................................................................. 6 2. T E S T C O N D I T I O N S A N D R E S U L T S .................................................. 7 2.1. Evaluation Method ....................................................................................................................................... 7 2.2. Limit .............................................................................................................................................................. 8 2.3. Test Setup Diagram ..................................................................................................................................... 8 2.4. Measurement Procedure............................................................................................................................. 9 2.5. Equipment Approval Considerations ........................................................................................................ 9 2.6. Symbols .............................…

Text truncated - open the document above for the full version.

深圳市三盛创电子科技有限公司 承 認 書 客 戶： CUSTOMER: 深圳市铭景天电子有限公司 客 戶 料 號： CUST P/N: 三盛创 料 號： FINE P/N: G43.5-6.3UH 单线圈0.08*105P*10TS 産 品 型 號： DESC: Φ43.5MMX5.3MMX0.8MM开槽 日 期： DATE: 2023.07.26 版 本： Version: A.0 擬制 PREPARED BY 審核 CHECKED BY 批准 APPROVED BY 客戶承認 CUSTOMER APPROVE 郭柳 安帅印 安帅印 Shenzhen Sansheng Chuang electronic Technology Co., LTD 9 Yuquan East Road, Yutang Street, Guangming New District, Shenzhen SPECIFICATION 産 品 型 號： DESC Φ20.5x43-6.3uH-0.08x105-175mm 版本 Rev：A.0 客戶CUST: XXX 客户料号CUST P/N: 一、尺寸DIMENSION:(mm) 二、原理图SCHEMATIC DIAGRAM: A 43.0±1.0 B 20.5±0.5 D 175±2 E 3±1.5 F 42.5±0.5 G 8.0 ±1 H 2.3 ＋0.2 I 5.3 ref J 43.5±0.5 K 3.0±1 注： 1.交叉出线; 2.出线位置缠8mm(ref)宽度高 温胶纸1-2Ts; 3.线圈贴圆形硬磁片带槽，磁 片尺寸43.5±0.5mm,内孔 5.3mm,厚度为0.8±0.1mm 三、绕线参数Winding Specification: 序号 NO. 端子 TERMINAL 线径 WIRE 圈数 Turns 绕线方向 Winding Direction 1 S F 丝包线0.08*105P 10Ts CCW 四、电气特性ELECTRICAL CHARACTERISTICS: 温度TEMPERATURE:25±10°C, 湿度RELATIVE HUMIDITY:65±20% 序号 NO. 项目 ITEM 端子 TERMINAL 标准 SPECIFICATION 测试条件 TEST FREQUENCY 测试仪器 TEST EQUIPMENTS 1 IND. S-F 3.8uH ±10%单独线圈 100KHz/1.0V LCZ METER 1062B 2 IND. S-F 6.3uH ±10%加磁片 100KHz/1.0V LCZ METER 1062B 3 DCR S-F ≤50mΩ 100KHz/1.0V LCZ METER 502B 4 Q S-F ≥78 100KHz/1.0V LCZ METER 502B 擬制/日期PREPARED BY/DATE 審核/日期CHECKED BY/DATE 郭柳2023.07.26 安帅印2023.07.26 We statement that All measurements were performed radiated and therefore additional antenna gain documentation is not required. 3 三．电路图/CIRCUITDIAGRAM unit：MM 四．外形图/OUTSIDE DIAGRA 1.025 7 Shenzhen Long Yun Xun Electronics Co., LTD First and second floor, Yudafu Industrial Park Office Building, Xingye West Road, Shajing Town, Baoan District, Shenzhen Model：50*0.8*5.1 * 0.08*105P引 We statement that All measurements were performed radiated and therefore additional antenna gain documentation is not required.

Shenzhen CTA Testing Technology Co., Ltd. Room 106, Building 1, Yibaolai Industrial Park, Qiaotou Community, Fuhai Street, Bao’an District, Shenzhen, China TEST REPORT FCC Rules and Regulations Part 15 Subpart C (Section 15.209), Report Reference No. .....................: FCC ID ..............................................: CTA24053000201 2BCVOTP-C30 Compiled by ( position+printed name+signature) .. : File administrators Jinghua Xiao Supervised by ( position+printed name+signature) .. : Test Engineer Lushan Kong Approved by ( position+printed name+signature) .. : Manager Eric Wang Date of issue ..................................... : Jun 05, 2024 Representative Laboratory Name . : Shenzhen CTA Testing Technology Co., Ltd. Address ............................................ : Room 106, Building 1, Yibaolai Industrial Park, Qiaotou Community, Fuhai Street, Bao‘an District, Shenzhen, China Applicant’s name ............................ : Guangdong Pisen Electronics Co., Ltd. Address ............................................ : Building 5, 1st Floor, No. 9, Qinfu 1st Street, Liuyue Nan Community, Henggang Town, Longgang District, Shenzhen City, Guangdong Province, China Test specification ...........................: Standard ........................................... : FCC Rules and Regulations Part 15 Subpart C (Section 15.209) Shenzhen CTA Testing Technology Co., Ltd. All rights reserved. This publication may be reproduced in whole or in part for non-commercial purposes as long as the Shenzhen CTA Testing Technology Co., Ltd. is acknowledged as copyright owner and source of the material. Shenzhen CTA Testing Technology Co., Ltd. takes no responsibility for and will not assume liability for damages resulting from the reader's interpretation of the reproduced material due to its placement and context. Test item description .....................: PISEN - 2-in-1 Night Light Wireless Charging Stand Trade Mark ....................................... : PISEN Manufacturer .................................... : Guangdong Pisen Electronics Co., Ltd. Model/Type reference....................... : TP-C30 List Model ......................................... : N/A Modulation Type ............................... : ASK Operation Frequency ........................ : 115-205KHz Ratings ............................................. : Input:Type-C:DC5.0V/2.0A, 9.0V/2.0A, 12.0V/3.0A Wireless Output 1: Wireless Charging for Phones (Magnetic Attachment):5W/7.5W/10W/15W Wireless Output 2: Wireless Charging for Phones (Desktop):5W/7.5W/10W/15W or Wireless Charging for Earphones:5W Total Output: 15W Result................................................ : PASS Report No.: CTA24053000201 Page 2 of 26 T E S T R E P O R T Test Report No. : CTA24053000201 Jun 05, 2024 ______________________________________________________________________________________________ Date of issue Equipment under Test : PISEN - 2-in-1 Night Light Wireless Charging Stand Model /Type : TP-C30 Listed Models : N/A Applicant : Guangdong Pisen Electronics Co., Ltd. Address : Building 5, 1st Floor, No. 9, Qinfu 1st Street, Liuyue Nan Community, Henggang Town, Longgang District, Shenzhen City, Guangdong Province, China Manufacturer Guangdong Pisen Electronics Co., Ltd. Address : Building 5, 1st Floor, No. 9, Qinfu 1st Street, Liuyue Nan Community, Henggang Town, Longgang District, Shenzhen City, Guangdong Province, China Test Result: PASS The test report merely corresponds to the test sample. It is not permitted to copy extracts of these test result without the written permission of the test laboratory. Report No.: CTA24053000201 Page 3 of 26 Contents 1. T E S T S T A N D A R D S ....................................................................... 4 2. S U M M A R Y .................................................................................. 5 2.1. General Remarks ......................................................................................................................................... 5 2.2. Product Description .................................................................................................................................... 5 2.3. Equipment Under Test ................................................................................................................................ 5 2.4. EUT Exercise Software ............................................................................................................................... 6 2.5. Special Accessories .................................................................................................................................... 6 2.6. External I/O Cable ........................................................................................................................................ 6 2.7. Modifications ............................................................................................................................................... 6 3. T E S T E N V I R O N M E N T ................................................................... 7 3.1. Address of the test laboratory ................................................................................................................... 7 3.2. Test Facility .................................................................................................................................................. 7 3.3. Test Description .......................................................................................................................................... 7 3.4. Statement of the measurement uncertainty ............................................................................................. 7 3.5. Equipments Used during the Test ............................................................................................................. 8 4. T E S T C O N D I T I O N S A N D R E S U L T S .................................................. 9 4.1. AC Power Conducted Em…

Text truncated - open the document above for the full version.

FCC ID: 2BCVOTP-C30 _______________________________________________________________________________________________ 1. TEST SETUP PHOTOGRAPHS 1.1. Photo of Radiated Emissions Measurement Fig. 1 Fig. 2 FCC ID: 2BCVOTP-C30 _______________________________________________________________________________________________ 1.2. Photo of Conducted Emissions Measurement Fig. 3