2BDOG-G18Fast Wireless Charging Holder

Instructions Fast Wireless Charging Holder Parameters: Type C charging interface Please read the instructions carefully before using Fast charging with 15W output. Custom made magnet array, precisely compatible for iPhone 15/14/13/12 series phones. 360 degree rotation for your optimal viewing angle. Cradleless design, easy to hold and remove the phone. Features: Package includes a high ecient Type C charging cable. Product specication: Instructions: Charging Cable Air vent mount please refer to the gift box selected model as exact product) Magnetic charging head φ60 mm 32 mm φ 55 mm Metal ring with double side sticker Instructions: Work for all phones and most case Note: The sticky metal ring does not stick well to textured, leather or liquid silicone phone cases. 1. For iPhone 15/14/13/12 series case free or with magsafe case, attach to magnetic mount directly without the metal ring. 2. For iPhone 15/14/13/12 series with regular case or for other phones,need to stick the metal ring to center of the back of the case. Magnetic charging head: 2A 115-205KHZ 2BDOG-G18 5W / 7.5W / 10W / 15W (Max) 5V / 9V / 12V VoltageCurrent Output FCC ID Charging frequency 10W75% 15W84% 1-3mm Eciency Induction Distance 1. Insert the adjuster into ball joint of air vent mount, insert the ball into the socket at the back of magnet head, turn the adjuster to tighten. 2. Insert the hook into the car air outlet vane and tighten to lock. when you hear 'clatter' sounds, it means the mount has been xed tightly. Attentions 1. Please use the product correctly according instructions. 4. Please do not put wireless charger close to cards with magnetic stripes or chips (ID card,credit card etc.) to avoid demagnetization 5. Please keep wireless charger at least 20 CM distance away from implantable medical device (heart pacemaker, Implantable cochlea etc.) to avoid potential interferences. 6. Please do safekeeping, do not let your kids treat wireless charger as toy to avoid unwanted accidents. The pictures only supplies the reference, please take the actual product as the standard. 2. Please do not disassemble the product or throw it to re and water, to avoid leakage that caused by electrical short circuit. 3. Please do not use wireless charger in high temperature, wet, corrosive environment, to avoid leakage that caused by damaged circuit. 4. Put the phone on the magnet head, adjust the best viewing angle. 3. Connect the charging cable to the charging interface. FCC Statement NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. Any changes or modications not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment. FCC ID: 2BDOG-G18 FCC WARNING:This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. The equipment complies with FCC Radiation exposure limit set forth for an uncontrolled environment. The equipment should be installed and operated with a minimum distance of 20cm between the product and your body. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment o and on, the user is encouraged to try to correct the interference by one or more of the following measures: -- Reorient or relocate the receiving antenna. -- Increase the separation between the equipment and receiver. -- Connect the equipment into an outlet on a circuit dierent from that to which the receiver is connected. -- Consult the dealer or an experienced radio/TV technician for help.

OasisCompliance,Inc.FCCID: 2BDOG-G18 CFR47§2.911(d)(7)FCCUSAgentLetterofAttestation Date:11-27-2023 FCCID:2BDOG-G18FRN:0034510768 To:FederalCommunicationsCommission 7435OaklandMillsRoad Columbia,MD21046 ToWhomItMayConcern, ThisletteristoconfirmthatwehaveacceptedtheresponsibilitytoactasUSAgentonbehalf ofDongGuanChuangJieElectronicsCo.,Ltd.(“theapplicant”)fortheabovereferenced FCCID. Weareawareoftherequirementsandresponsibilitiesoftheapplicant’sagentforserviceof processasoutlinedintheFCCsection2.911(d)(7)andReportandOrderFCC22-84paragraph 63. U.S.AgentInformation: OasisCompliance,Inc. FRN:0033464157 JamesHe 3313VerdiDr,SanJose,CA95111 Cell:2026028330 Sincerelyyours, JamesHe GlobalMarketAccessManager OasisCompliance,Inc. Email:[email protected]

C5266091_X24_Ed.2 1/1 “Attestation Statements” TO: Office of Engineering Technology Federal Communications Commission 7435 Oakland Mills Road Columbia, MD 21046 The Commission adopted rules that prohibit equipment authorization for “covered” telecommunications equipment and video surveillance equipment produced by entities identified on the Commission’s Covered List 1 , which is periodically updated. See the Covered List for more details. This Attestation Statement is to confirm that we follow the Section 2.911(d)(5)(i)-(ii) Applicant Company name: DongGuan ChuangJie Electronics Co., Ltd. FRN: 0034510768 Grantee code: 2BDOG FCC ID: 2BDOG-G18 Contact Name: Susan hu Address: No.8, Jinxing Road, Jinfenghuang Industrial District, Fenggang Town, Dongguan City Telephone No: 0769-82098688-8116 Fax No: 0769-82995889 Email: [email protected] i. [DongGuan ChuangJie Electronics Co., Ltd.] (“the applicant”) certifies that the equipment for which authorization is sought is not “covered” equipment prohibited from receiving an equipment authorization pursuant to section 2.903 of the FCC rules. The applicant must sign this certification. ii. [ DongGuan ChuangJie Electronics Co., Ltd.] (“the applicant”) certifies that, as of the date of the filing of the application, the applicant is not (as a specifically named entity or any of its subsidiaries or affiliates) identified on the Covered List as an entity producing “covered” equipment. The applicant must sign this certification. DongGuan ChuangJie Electronics Co., Ltd. certifies that, as of the date of the filing of the application, the applicant is not identified on the Covered List as an entity producing “covered” equipment. Date: 11.30.2023 Applicant’s Name: Susan hu Title: Manager Signature 1 The Commission’s Covered List is published by the Public Safety and Homeland Security Bureau and posted on the Commission’s website. This Covered List, which is periodically updated, identifies particular equipment, produced by particular entities, that constitutes “covered” equipment. https://www.fcc.gov/supplychain/coveredlist

CFR47§2.911(d)(7)AgentDesignationAttestation Date:11-27-2023 FCCID:2BDOG-G18FRN:0034510768 To:FederalCommunicationsCommission 7435OaklandMillsRoad Columbia,MD21046 DongGuanChuangJieElectronicsCo.,Ltd.(“theapplicant”)asrequiredbysection 2.911(d)(7),designatesthefollowingagent,locatedintheUnitedStates,forpurposesofacting astheapplicant’sagentforserviceofprocess. Theapplicantacknowledgesthattheywillmaintainanagentfornolessthanoneyearafterthe granteehasterminatedallmarketingandimportationortheconclusionofanyCommission- relatedproceedinginvolvingtheequipment.Theapplicantfurtheracknowledgestheir responsibilitytoinformtheFCCwhenevertheagentinformationchanges. U.S.AgentInformation: JamesHe OasisCompliance,Inc. FRN:0033464157 3313VerdiDr,SanJose,CA95111 [email protected] cell:2026028330 Sincerelyyours, Susanhu Manager DongGuanChuangJieElectronicsCo.,Ltd. Address:No.8,JinxingRoad,JinfenghuangIndustrialDistrict,FenggangTown,DongguanCity, GuangdongProvince,China Email:[email protected] Phone:+86-0769-82098688-8116

C5266091_X8_Ed.1 1/1 Letter of Authorization Company: DongGuan ChuangJie Electronics Co., Ltd. Address: No.8, Jinxing Road, Jinfenghuang Industrial District, Fenggang Town, Dongguan City Product Name: Fast Wireless Charging Holder Model Number: G18 FCC Identifier: 2BDOG-G18 We authorize LGAI Technological Center S.A., Ronda de la Font del Carme, s/n, 08193 Bellaterra, Spain, to act on our behalf on all matters concerning the above named equipment. Any individual within LGAI Technological Center S.A. is authorized to act on our behalf and take action on the application. We declare that authorize LGAI Technological Center S.A., Ronda de la Font del Carme, s/n, 08193 Bellaterra, Spain, is allowed to forward all information related to the approval project to the Federal Communication Commission and to discuss any issues concerning the approval application. Any and all acts carried out by LGAI Technological Center S.A. on our behalf shall have the same effect as acts of our own. Name: Susan hu Date: 11/30/2023 Title: Manager Signature of applicant:

C5266091_X10_Ed.1 1/1 DongGuan ChuangJie Electronics Co., Ltd. Office of Engineering Technology Federal Communications Commission 7435 Oakland Mills Road Columbia, MD 21046 Date: 11/30/2023 Subject: Request for Confidentiality FCC ID: 2BDOG-G18 To Whom It May Concern, Pursuant to the provisions of Sections 0.457 and 0.459 of Commission's rules (47CFR0.457, 0.459), we are requesting the Commission to withhold the following att achment(s) as confidential document from public disclosure. Exhibits Long-Term Confidentiality Short-Term Confidentiality ID Label/Location No No Attestation Statement No No External Photos No Block Diagram Schematics Test Report No No Test Setup Photos No User’s Manual Internal Photos Parts List / Tune Up RF Exposure Info Operational Description Cover Letter(s) No No SDR Software / Security Info No Above mentioned document contains detailed system and equipment description are considered as proprietary information in operation of the equipment. The public disclosure of above documents might be harmful to our company and would give competitor an unfair advantage in the market. It is our understanding that all measurement test reports, FCC ID label format and correspondent during certification review process cannot be granted as confidential documents and those information will be available for public review once the grant of equipment authorization is issued. Sincerely, Signature: Name: Susan hu Date: 11/30/2023 Title: Manager

Page 1 of 4 Address: 101, No. 7, Zone 2, Xinxing Industrial Park, Fuhai Avenue, Xinhe Community, Fuhai Street, Bao’an District, Shenzhen, Guangdong, China Tel : (8 6-755)88850135 Fax: (86-755) 88850136 Web: www.mtitest.com E-mail: [email protected] Photographs of the EUT (External Photos) Model: G18 Page 2 of 4 Address: 101, No. 7, Zone 2, Xinxing Industrial Park, Fuhai Avenue, Xinhe Community, Fuhai Street, Bao’an District, Shenzhen, Guangdong, China Tel : (8 6-755)88850135 Fax: (86-755) 88850136 Web: www.mtitest.com E-mail: [email protected] Page 3 of 4 Address: 101, No. 7, Zone 2, Xinxing Industrial Park, Fuhai Avenue, Xinhe Community, Fuhai Street, Bao’an District, Shenzhen, Guangdong, China Tel : (8 6-755)88850135 Fax: (86-755) 88850136 Web: www.mtitest.com E-mail: [email protected] Page 4 of 4 Address: 101, No. 7, Zone 2, Xinxing Industrial Park, Fuhai Avenue, Xinhe Community, Fuhai Street, Bao’an District, Shenzhen, Guangdong, China Tel : (8 6-755)88850135 Fax: (86-755) 88850136 Web: www.mtitest.com E-mail: [email protected]

F a s t W i r e l e s s C h a r g i n g H o l d e r I n p u t : 5 V 2 A 9 V 2 A 1 2 V 1 . 6 7 A O u t p u t : 1 5 W ( m a x ) F C C I D : 2 B D O G - G 1 8 M A D E I N C H I N A

Page 1 of 3 Address: 101, No. 7, Zone 2, Xinxing Industrial Park, Fuhai Avenue, Xinhe Community, Fuhai Street, Bao’an District, Shenzhen, Guangdong, China Tel : (8 6-755)88850135 Fax: (86-755) 88850136 Web: www.mtitest.com E-mail: [email protected] Photographs of the EUT (Internal Photos) Model: G18 Page 2 of 3 Address: 101, No. 7, Zone 2, Xinxing Industrial Park, Fuhai Avenue, Xinhe Community, Fuhai Street, Bao’an District, Shenzhen, Guangdong, China Tel : (8 6-755)88850135 Fax: (86-755) 88850136 Web: www.mtitest.com E-mail: [email protected] Page 3 of 3 Address: 101, No. 7, Zone 2, Xinxing Industrial Park, Fuhai Avenue, Xinhe Community, Fuhai Street, Bao’an District, Shenzhen, Guangdong, China Tel : (8 6-755)88850135 Fax: (86-755) 88850136 Web: www.mtitest.com E-mail: [email protected] ANT

Address: 101, No. 7, Zone 2, Xinxing Industrial Park, Fuhai Avenue, Xinhe Community, Fuhai Street, Bao’an District, Shenzhen, Guangdong, China Tel: (86-755)88850135 Fax: (86-755) 88850136 Web: www.mtitest.com E-mail: [email protected] Test Report Report No.: MTi231116012-01E2 Date of issue: 2023-11-25 Applicant: DongGuan ChuangJie Electronics Co. , Ltd. Product: Fast Wireless Charging Holder Model(s): G18 FCC ID: 2BDOG-G18 Shenzhen Microtest Co., Ltd. http://www.mtitest.com Page 2 of 13 Report No.: MTi231116012-01E2 Address: 101, No. 7, Zone 2, Xinxing Industrial Park, Fuhai Avenue, Xinhe Community, Fuhai Street, Bao’an District, Shenzhen, Guangdong, China Tel: (86-755)88850135 Fax: (86-755) 88850136 Web: www.mtitest.com E-mail: [email protected] Instructions 1. This test report shall not be partially reproduced without the written consent of the laboratory. 2. The test results in this test report are only responsible for the samples submitted 3. This test report is invalid without the seal and signature of the laboratory. 4. This test report is invalid if transferred, altered, or tampered with in any form without authorization. 5. Any objection to this test report shall be submitted to the laboratory within 15 days from the date of receipt of the report. Page 3 of 13 Report No.: MTi231116012-01E2 Address: 101, No. 7, Zone 2, Xinxing Industrial Park, Fuhai Avenue, Xinhe Community, Fuhai Street, Bao’an District, Shenzhen, Guangdong, China Tel: (86-755)88850135 Fax: (86-755) 88850136 Web: www.mtitest.com E-mail: [email protected] Contents 1 General Description ........................................................................................................................ 5 1.1 Description of the EUT ....................................................................................................................................... 5 1.2 Description of test modes ................................................................................................................................... 5 1.3 Description of support units ................................................................................................................................ 6 2 Measurement uncertainty ............................................................................................................... 6 3 Test facilities and accreditations .................................................................................................... 7 3.1 Test laboratory .................................................................................................................................................... 7 4 List of test equipment ..................................................................................................................... 8 5 Test result ........................................................................................................................................ 9 5.2 Test setup ......................................................................................................................................................... 10 5.3 Test Procedures ................................................................................................................................................ 10 5.4 Equipment Approval Considerations ................................................................................................................ 11 5.5 Test results ....................................................................................................................................................... 12 Photographs of the Test Setup ............................................................................................................ 13 Photographs of the EUT....................................................................................................................... 13 Page 4 of 13 Report No.: MTi231116012-01E2 Address: 101, No. 7, Zone 2, Xinxing Industrial Park, Fuhai Avenue, Xinhe Community, Fuhai Street, Bao’an District, Shenzhen, Guangdong, China Tel: (86-755)88850135 Fax: (86-755) 88850136 Web: www.mtitest.com E-mail: [email protected] Test Result Certification Applicant: DongGuan ChuangJie Electronics Co. , Ltd. Address: No.8, Jinxing Road, Jinfenghuang Industrial District, Fenggang Town, Dongguan City Manufacturer: DongGuan ChuangJie Electronics Co. , Ltd. Address: No.8, Jinxing Road, Jinfenghuang Industrial District, Fenggang Town, Dongguan City Product description Product name: Fast Wireless Charging Holder Trademark: N/A Model name: G18 Series Model: N/A Standards: FCC CFR 47 PART 1, § 1.1310 Test method: KDB 680106 D01 Wireless Power Transfer v04 Date of Test Date of test: 2023-11-20 to 2023-11-24 Test result: Pass Test Engineer : (Letter Lan) Reviewed By: : (Leon Chen) Approved By: : (Tom Xue) Page 5 of 13 Report No.: MTi231116012-01E2 Address: 101, No. 7, Zone 2, Xinxing Industrial Park, Fuhai Avenue, Xinhe Community, Fuhai Street, Bao’an District, Shenzhen, Guangdong, China Tel: (86-755)88850135 Fax: (86-755) 88850136 Web: www.mtitest.com E-mail: [email protected] 1 General Description 1.1 Description of the EUT Product name: Fast Wireless Charging Holder Model name: G18 Series Model: N/A Model difference: N/A Electrical rating: Input: DC 5V⎓2A 9V⎓2A 12V⎓1.67A Accessories: Cable: USB-A to USB-C cable 1m Hardware version: V1.0 Software version: V1.2 RF specification: Operation frequency: 115-205KHz Modulation type: ASK Antenna type: Coil Antenna 1.2 Description of test modes All the test modes were carried out with the EUT in normal operation, the final test mode of the EUT was the worst test mode for emission test, which was shown in this report and defined as: No. Emission test modes Mode1 Wireless Output(5W) Mode2 Wireless Output(7.5W) Mode3 Wireless Output(10W) Mode4 Wireless Output(15W) Page 6 of 13 Report No.: MTi231116012-01E2 Address: 101, No. 7, Zone 2, Xinxing Industrial Park, Fuhai Avenue, Xinhe Community, Fuhai Street, …

Text truncated - open the document above for the full version.

Hai Ning Jun Rui Electronic Co., LTD SPECIFICATION FOR APPROVAL ■ Product Apperance & Dimensions (Unit: mm) (Note: The picture is for reference only, the product is subject to the actual.) ■Product Electrical characteristics (Parameter)： (Value) （Product name） Wireless charging coil module (Product number)： Q4308A12-30KTY（72股） (Ferrite type)： Φ43.5*Φ5*0.8mm (Coil type)： 0.08*72P (Coil Turns)： 11TS （Coil direction）: CW (Inductance)： 6.7μH ±10% (DC Resistance)： 65 mΩ (Max.) (Testing Instrument)： TH2816B @100kHz、1Vrms、TH2512B At 25°C （Note）： ■ (Contact Us For More Information)。 （TEL）:15857396935

The test report is only used for customer scientific research, teaching, internal quality control and other purposes, and is for internal reference only. Address: 101, No. 7, Zone 2, Xinxing Industrial Park, Fuhai Avenue, Xinhe Community, Fuhai Street, Bao’an District, Shenzhen, Guangdong, China Tel: (86-755)88850135 Fax: (86-755) 88850136 Web: www.mtitest.com E-mail: [email protected] Test Report Report No.: MTi231116012-01E1 Date of issue: 2023-11-25 Applicant: DongGuan ChuangJie Electronics Co. , Ltd. Product: Fast Wireless Charging Holder Model(s): G18 FCC ID: 2BDOG-G18 Shenzhen Microtest Co., Ltd. http://www.mtitest.com Page 2 of 24 Report No.: MTi231116012-01E1 Address: 101, No. 7, Zone 2, Xinxing Industrial Park, Fuhai Avenue, Xinhe Community, Fuhai Street, Bao’an District, Shenzhen, Guangdong, China Tel: (86-755)88850135 Fax: (86-755) 88850136 Web: www.mtitest.com E-mail: [email protected] Instructions 1. This test report shall not be partially reproduced without the written consent of the laboratory. 2. The test results in this test report are only responsible for the samples submitted 3. This test report is invalid without the seal and signature of the laboratory. 4. This test report is invalid if transferred, altered, or tampered with in any form without authorization. 5. Any objection to this test report shall be submitted to the laboratory within 15 days from the date of receipt of the report. Page 3 of 24 Report No.: MTi231116012-01E1 Address: 101, No. 7, Zone 2, Xinxing Industrial Park, Fuhai Avenue, Xinhe Community, Fuhai Street, Bao’an District, Shenzhen, Guangdong, China Tel: (86-755)88850135 Fax: (86-755) 88850136 Web: www.mtitest.com E-mail: [email protected] Table of contents 1 General Description ......................................................................................................................... 5 1.1 Description of the EUT ............................................................................................................................... 5 1.2 Description of test modes .......................................................................................................................... 5 1.3 Environmental Conditions .......................................................................................................................... 6 1.4 Description of support units ....................................................................................................................... 6 1.5 Measurement uncertainty .......................................................................................................................... 6 2 Summary of Test Result .................................................................................................................. 7 3 Test Facilities and accreditations ................................................................................................... 8 3.1 Test laboratory ........................................................................................................................................... 8 4 List of test equipment ...................................................................................................................... 9 5 Evaluation Results (Evaluation) .................................................................................................... 10 5.1 Antenna requirement ............................................................................................................................... 10 6 Radio Spectrum Matter Test Results (RF) .................................................................................... 11 6.1 Conducted Emission at AC power line .................................................................................................... 11 6.2 20dB Occupied Bandwidth ...................................................................................................................... 14 6.3 Emissions in frequency bands (below 30MHz)........................................................................................ 17 6.4 Emissions in frequency bands (30MHz - 1GHz)...................................................................................... 20 Photographs of the test setup ............................................................................................................. 23 Photographs of the EUT....................................................................................................................... 24 Page 4 of 24 Report No.: MTi231116012-01E1 Address: 101, No. 7, Zone 2, Xinxing Industrial Park, Fuhai Avenue, Xinhe Community, Fuhai Street, Bao’an District, Shenzhen, Guangdong, China Tel: (86-755)88850135 Fax: (86-755) 88850136 Web: www.mtitest.com E-mail: [email protected] Test Result Certification Applicant: DongGuan ChuangJie Electronics Co. , Ltd. Address: No.8, Jinxing Road, Jinfenghuang Industrial District, Fenggang Town, Dongguan City Manufacturer: DongGuan ChuangJie Electronics Co. , Ltd. Address: No.8, Jinxing Road, Jinfenghuang Industrial District, Fenggang Town, Dongguan City Product description Product name: Fast Wireless Charging Holder Trade mark: N/A Model name: G18 Series Model(s): N/A Standards: 47 CFR Part 15C Test Method: ANSI C63.10-2013 Date of Test Date of test: 2023-11-20 to 2023-11-24 Test result: Pass Test Engineer : (Letter Lan) Reviewed By : (Leon Chen) Approved By : (Tom Xue) Page 5 of 24 Report No.: MTi231116012-01E1 Address: 101, No. 7, Zone 2, Xinxing Industrial Park, Fuhai Avenue, Xinhe Community, Fuhai Street, Bao’an District, Shenzhen, Guangdong, China Tel: (86-755)88850135 Fax: (86-755) 88850136 Web: www.mtitest.com E-mail: [email protected] 1 General Description 1.1 Description of the EUT Product name: Fast Wireless Charging Holder Model name: G18 Series Model(s): N/A Model difference: N/A Electrical rating: Input: DC 5V⎓2A 9V⎓2A 12V⎓1.67A Accessories: Cable: USB-A to USB-C cable 1m Hardware version: V1.0 Software version: V1.2 Test sample(s)…

Text truncated - open the document above for the full version.

Page 1 of 2 Address: 101, No. 7, Zone 2, Xinxing Industrial Park, Fuhai Avenue, Xinhe Community, Fuhai Street, Bao’an District, Shenzhen, Guangdong, China Tel : (8 6-755)88850135 Fax: (86-755) 88850136 Web: www.mtitest.com E-mail: [email protected] Photographs of the test setup Model: G18 Conducted Emission at AC power line Emissions in frequency bands (below 30MHz) Page 2 of 2 Address: 101, No. 7, Zone 2, Xinxing Industrial Park, Fuhai Avenue, Xinhe Community, Fuhai Street, Bao’an District, Shenzhen, Guangdong, China Tel : (8 6-755)88850135 Fax: (86-755) 88850136 Web: www.mtitest.com E-mail: [email protected] Emissions in frequency bands (30MHz - 1GHz) MPE