2BFCM-X7Smart watch

LEADOYS Technology (ShenZhen) Co., Ltd. 2.911 (d)(5)(i) Equipment Type Attestation v1.2 Section 2.911(d)(5)(i) Certification – Equipment Type Company name: LEADOYS Technology (ShenZhen) Co., Ltd. Address: Room 505, Building B, Bantian International Center, Longgang, Shenzhen, China Product Name: : Smart watch FCCID: 2BFCM-X7 Model(s): X7,X7PRO 2.911(d)(5)(i) Equipment Type We, [LEADOYS Technology (ShenZhen) Co., Ltd.] (“the applicant”) certify that the equipment for which authorization is sought through certification is not:  Prohibited from receiving an equipment authorization pursuant to § 2.903; of the FCC rules.  Identified as an equipment type in the “Covered List” NOTE 1 Yours sincerely, Name: Fan zhijun Date:2026/07/15 Title and Company name: Project Manager/LEADOYS Technology (ShenZhen) Co., Ltd. NOTE 1 “Covered List”; is the List of Equipment and Services Covered By Section 2 of The Secure Networks Act, available at https://www.fcc.gov/supplychain/coveredlist References; 1) 986446 D01 Covered Equipment v01 https://apps.fcc.gov/oetcf/kdb/forms/FTSSearchResultPage.cfm?switch=P&id=325672 2) Federal Register document 2022-28263 published on 02/06/23 https://www.federalregister.gov/documents/2023/02/06/2022-28263/protecting-against-national-security-threats-to-the-com munications-supply-chain-through-the

LEADOYS Technology (ShenZhen) Co., Ltd. 2.911 (d)(5)(ii) Applicant Attestation v1.3 Section 2.911(d)(5)(ii) Certification – Applicant (Covered List ) Company name: LEADOYS Technology (ShenZhen) Co., Ltd. Address: Room 505, Building B, Bantian International Center, Longgang, Shenzhen, China Product Name: : Smart watch FCCID: 2BFCM-X7 Model(s): X7,X7PRO 2.911(d)(5)(ii) Applicant filing We, [LEADOYS Technology (ShenZhen) Co., Ltd.] (“the applicant”) certify that, as of the date of the filing of the application, the applicant is not identified NOTE 1 on the “Covered List” NOTE 2 , established pursuant to § 1.50002 of this chapter, as an entity producing covered communications equipment. Yours sincerely, Name: Fan zhijun Date:2026/07/15 Title and Company name: Project Manager/LEADOYS Technology (ShenZhen) Co., Ltd. NOTE 1 Delete option not applicable to this application. NOTE 2 “Covered List”; is the List of Equipment and Services Covered By Section 2 of The Secure Networks Act, available at https://www.fcc.gov/supplychain/coveredlist References; 1)986446 D01 Covered Equipment v01 https://apps.fcc.gov/oetcf/kdb/forms/FTSSearchResultPage.cfm?switch=P&id=325672 2) Federal Register document 2022-28263 published on 02/06/23 https://www.federalregister.gov/documents/2023/02/06/2022-28263/protecting-against-national-security-threats-to-the-com munications-supply-chain-through-the

LEADOYS Technology (ShenZhen) Co., Ltd. Room 505, Building B, Bantian International Center, Longgang, Shenzhen, China Rev 1/26/2023 Federal Communications Commission Authorization and Evaluation Division 7435 Oakland Mills Road Columbia, MD 21046 USA Date: 2026/7/16 Ref: Attestation Statements Part 2.911(d)(7) Filing FCC ID: 2BFCM‐X7 Applicant FRN: 0035098169 [LEADOYS Technology (ShenZhen) Co., Ltd.] certifies that, as of the date of the filing of the application, [FCC US Agent, LLC] is our designated U.S. agent for service of process for the above referenced FCC ID. [LEADOYS Technology (ShenZhen) Co., Ltd.] accepts to maintain an agent for no less than one year after the grantee has terminated all marketing and importation or the conclusion of any Commission‐related proceeding involving the equipment. [FCC US Agent, LLC] accepts, as of the date of the filing of the application, the obligation of the designated U.S. agent for service of process for the above referenced FCC ID. Designated U.S. Agent Information: Company Name: FCC US Agent, LLC FRN: 0033402884 Address: 3722 Illinois Avenue, Saint Charles, IL, 60174, USA Contact Person: Tim Payne Phone: 708‐571‐3148 Email: [email protected] Sincerely, LEADOYS Technology (ShenZhen) Co., Ltd. FCC US Agent, LLC Fan zhijun Tim Payne

SHENZHEN MINEWSEMI CO., LTD Letter of Authorization Company name: LEADOYS Technology (ShenZhen) Co., Ltd. Address: Room 505, Building B, Bantian International Center, Longgang, Shenzhen, China Product Name: : Smart watch FCCID: 2BFCM-X7 Model(s): X7,X7PRO We authorize MiCOM Labs Inc., 575 Boulder Court, Pleasanton, California 94566, USA, to act on our behalf on all matters concerning the certification of above named equipment. We declare that MiCOM Labs Inc. is allowed to forward all information related to the approval and certification of equipment to the regulatory agencies as required and to discuss any issues concerning the approval application. Any and all acts carried out by MiCOM Labs on our behalf shall have the same effect as acts of our own. Signature: Date: 2026/07/15 Name: Fan zhijun Title: Project Manager Company: LEADOYS Technology (ShenZhen) Co., Ltd.

Declaration on model difference We The main model and subsequent models tested in this test differ only in naming. All other aspects, including materials, other manufacturing processes, circuit design, and manufacturers, are exactly the same. We finally decided on the X7 as the test model. FCC ID: 2BFCM-X7 Production name Trade name Model no. Smart watch N/A X7,X7PRO Signature : Date: 2026/07/15 Name: Fan zhijun Title: Project Manager Company: LEADOYS Technology (ShenZhen) Co., Ltd.

LEADOYS Technology (ShenZhen) Co., Ltd. Office of Engineering Technology Federal Communications Commission 7435 Oakland Mills Road Columbia, MD 21046 USA Date: 2026/07/15 Subject; Request for Confidentiality FCC ID: 2BFCM-X7 To Whom It May Concern, Pursuant to the provisions of the Commission’s rules Title 47 Sections §0.457 and §0.459, we are requesting the Commission to withhold the following attachment(s) as confidential documents from public disclosure indefinitely. These documents contain detailed system and equipment descriptions and are considered as proprietary information in operation of the equipment. The public disclosure of these documents might be harmful to our company and would give competitors an unfair advantage in the market. Schematic Diagram Block Diagram Operational Description In additional to above mentioned documents, in order to comply with the marketing regulations in Title 47 CFR §2.803 and the importation rules in Title 47 CFR §2.1204, while ensuring that business sensitive information remains confidential until the actual marketing of newly authorized devices, we request Short Term Confidentiality of the following attachment(s); External Photos Test Setup Photos Internal Photos User Manual For 45 days, pursuant to Public Notice DA 04-1705. OR For 180 days pursuant to KDB 726920 D01. It is our understanding that all measurement test reports, FCC ID label format and correspondence during the certification review process cannot be granted as confidential documents and this information will be available for public review once the grant of equipment authorization is issued. Sincerely, Signature: Name: Fan zhijun Title: Project Manager

Material: Screen Printing Size:20mm*20mm FCC ID: 2BFCM-X7 Product Name: Smart watch Model: X7 Label location

FCC ID:2BFCM-X7 Portable device According to § 15.247(i) and § 1.1307(b)(1), systems operating under the provisions of this section shall be operated in a manner that ensures that the public is not exposed to radio frequency energy level in excess of the Commission’s guidelines. According to KDB447498 D01 General RF Exposure Guidance V06 The 1-g and 10-g SAR test exclusion thresholds for 100 MHz to 6 GHz at test separation distances ≤ 50 mm are determined by: [(max. power of channel, including tune-up tolerance, mW)/(min. test separation distance, mm)] * [√f(GHz)] ≤ 3.0 for 1-g SAR and ≤ 7.5 for 10-g extremity SAR, where f(GHz) is the RF channel transmit frequency in GHz； Power and distance are rounded to the nearest mW and mm before calculation； The result is rounded to one decimal place for comparison； The test exclusions are applicable only when the minimum test separation distance is ≤ 50 mm and for transmission frequencies between 100 MHz and 6 GHz. When the minimum test separation distance is < 5 mm, a distance of 5 mm is applied to determine SAR test exclusion. We use 5mm as separation distance to calculate. Maximum measured transmitter power: BT Channel Freq. (MHz) Max Transmit Power (dBm) Max tune-up power (dBm) Result calculation 1-g SAR GFSK 2402 -4.64 -3 0.15 3.0 2441 -4.92 -3 0.15 3.0 2480 -5 -4 0.12 3.0 pi/4-DQPSK 2402 -3.97 -3 0.15 3.0 2441 -4.22 -3 0.15 3.0 2480 -4.31 -3 0.15 3.0 8DPSK 2402 -3.56 -2 0.19 3.0 2441 -3.79 -2 0.19 3.0 2480 -3.9 -2 0.19 3.0 BLE BLE 1M 2402 -1.33 0 0.31 3.0 2440 -0.89 0 0.31 3.0 2480 -0.33 0 0.31 3.0 BLE 2M 2402 -1.07 0 0.31 3.0 2440 -0.68 0 0.31 3.0 2480 -0.19 0 0.31 3.0 CONCLUSION of simultaneous transmitter Both of the （BT） and （BLE） can transmit simultaneously, the formula of calculated the MPE is: CPD1/LPD1+CPD2/LPD2+......etc. < 1 CPD = Calculation power density LPD = Limit of power density Therefore the worst-case situation is 0.19 /1.00+0.31/1.00=0.5which is less Conclusion: For the max result : 0.5≤ 3.0 for 1-g SAR extremity SAR, No SAR is required.

X7 Test Report Anweishu频: Mobile phone number: Time：2026.6.20 Report version summary version date Content summary V1 2026.6.20 Test data Project development environment Directional diagram Antenna gain Size drawing The End 此报告中所含的一切信息版权归我司所有，在未得到我司许可下，请勿散播给任何第三方

No.：BCTC/KJ-RF-ICT-001 Page 1 of 54 Edition：B.1 TEST REPORT Shenzhen BCTC Technology Co., Ltd. Report No.: BCTC2606046464-1E Applicant: LEADOYS Technology (ShenZhen) Co., Ltd. Product Name: Smart watch Test Model: X7 Tested Date: 2026-06-30 to 2026-07-10 Issued Date: 2026-07-17 Report No.: BCTC2606046464-1E No.：BCTC/KJ-RF-ICT-001 Page 2 of 54 Edition：B.1 FCC ID: 2BFCM-X7 The test report is effective only with both signature and specialized stamp.This result(s) shown in this report refer only to the sample(s) tested. Without written approval of Shenzhen BCTC Technology Co., Ltd, this report can’t be reproduced except in full.The tested sample(s) and the sample information are provided by the client. Product Name: Smart watch Trademark: N/A Model/Type Ref.: X7,X7PRO Prepared For: LEADOYS Technology (ShenZhen) Co., Ltd. Address: Room 505, Building B, Bantian International Center, Longgang, Shenzhen, China Manufacturer: LEADOYS Technology (ShenZhen) Co., Ltd. Address: Room 505, Building B, Bantian International Center, Longgang, Shenzhen, China Prepared By: Shenzhen BCTC Technology Co., Ltd. Address: Room 101M, Unit 1, Building1, Pengyuan, No.18, Lilang Road, Shanglilang, Nanwan Subdistrict, Longgang District, Shenzhen, Guangdong, China. Sample Received Date: 2026-06-30 Sample tested Date: 2026-06-30 to 2026-07-10 Report No.: BCTC2606046464-1E Test Standards: 47 CFR Part 15 Subpart C (clause 15.247) ANSI C63.10-2020 Test Results: PASS Remark: This is Bluetooth BLE radio test report. Prepared by : Reviewer by : Approved by: Louis Zeng Mike Zheng Sewen Guo Report No.: BCTC2606046464-1E No.：BCTC/KJ-RF-ICT-001 Page 3 of 54 Edition：B.1 Table of Content Test Report Declaration Page 1. Version .................................................................................................................. 5 2. Test Summary ....................................................................................................... 6 3. Measurement Uncertainty ..................................................................................... 7 4. Product Information And Test Setup ..................................................................... 8 4.1 Product Information ............................................................................................... 8 4.2 Test Setup Configuration ...................................................................................... 9 4.3 Support Equipment ............................................................................................... 9 4.4 Channel List ........................................................................................................ 10 4.5 Test Mode ........................................................................................................... 10 4.6 Table Of Parameters Of Text Software Setting ................................................... 10 5. Test Facility And Test Instrument Used ............................................................... 11 5.1 Test Facility ......................................................................................................... 11 5.2 Test Instrument Used .......................................................................................... 11 6. Conducted Emissions .......................................................................................... 14 6.1 Block Diagram Of Test Setup .............................................................................. 14 6.2 Limit .................................................................................................................... 14 6.3 Test procedure .................................................................................................... 14 6.4 EUT Operating Conditions .................................................................................. 14 6.5 Test Result .......................................................................................................... 15 7. Radiated Emissions ............................................................................................. 17 7.1 Block Diagram Of Test Setup .............................................................................. 17 7.2 Limit .................................................................................................................... 18 7.3 Test procedure .................................................................................................... 19 7.4 EUT operating Conditions ................................................................................... 20 7.5 Test Result .......................................................................................................... 21 8. Radiated Band Emission Measurement and Restricted Bands Of Operation ...... 25 8.1 Block Diagram Of Test Setup .............................................................................. 25 8.2 Limit .................................................................................................................... 25 8.3 Test Procedure ................................................................................................... 26 8.4 EUT Operating Conditions .................................................................................. 26 8.5 Test Result .......................................................................................................... 27 9. Power Spectral Density Test ............................................................................... 28 9.1 Block Diagram Of Test Setup .............................................................................. 28 9.2 Limit .................................................................................................................... 28 9.3 Test procedure .................................................................................................... 28 9.4 EUT Operating Conditions .................................................................................. 28 9.5 Test Result .…

Text truncated - open the document above for the full version.