2BFHC-ICON300Bluetooth Headset

1 13 +1-*DPO
3# Bluetooth Headset
User Guide We Hear Your Vision 2 Headset overview Icon Headset control Mute ANC Volume DND indicator lights LED indicator lights Internal microphone Charge port ,4"/,+ȡ,ƛ Bluetooth dongle USB-C PORT 3 How to charge your headset Your headset should have enough power to pair and make a few calls directly out of the box. Low battery level: The heaset will give a voice prompt “Low battery” "3"/6ǘǕ*&+21"0+!&0)0,&+!& 1"!6Ɲ0%&+$/"!)&$%1 located at the side of the power button. Headset charging: The headset can be charged using the USB-C cable supplied with the headset. Simply connect the USB-C jack into the USB-C port located on the base of the right-hand microphone speaker housing and then connect the USB-C /A adapter into your PC, laptop or directly into a USB wall socket. It takes approximately 2 hours to fully charge. When fully charged the battery life can be up to 55 hours dependant on how you choose to use your headset. The battery level LED on the headset will display as solid red while charging and solid blue when the battery is fully charged. Battery level LED indicator Right-hand side speaker housing 4 How to use ,4"/,+ȡ,ƛ )&!"1%",+ȡ,ƛ04&1 %1,1%"+,/ƛ-,0&1&,+1,-,4"/1%"%"!0"1 ,+,/,ƛǽ Right-hand side speaker housing   5 How to connect Pair to a computer Plug the supplied BT dongle (found in the handy storage drawer ), 1"!&+1%"0",#1%")"#1Ȓ%+!0-"("/%,20&+$Ȝ&+1,Ȓ -,/1on your PC or laptop. The -3/,FRQ5% and BT dongle are pre-paired and ready to use. If for whatever reason the pairing is not automatic, switch the headset to “ON”Ǿ-&/&+$4&))01/1ƞ"/Ǜ0" ,+!0ǽ %"!,+$)"4&))Ɲ0%/"!+!)2"4%&)"-&/&+$ǽ   %")2"1,,1%/+$"&0ǖǕ*"1/"0țǘǘ#""1Ȝǽ #6,2/",21,#/+$"6,2 will hear a voice prompt saying “Out of range”. If there is no Bluetooth connection when pairing, the headset will stay &+-&/&+$*,!"#,/ǚ*&+21"0+!1%"+-,4"/,ƛǽ Pair to a smartphone To pair your headset to your mobile phone, slide the ,+ȡ,ƛswitch to the Bluetooth position and hold it there until the LED at the side of the 04&1 %Ɲ0%"0+!6,2%"/1%"3,& "-/,*-106“Pairing” in your headset. Go to the Bluetooth menu on your mobile phone and select -3/ ,FRQ5% from the list of available devices. Pair to active devices The -3/,FRQ5% can be paired with two active devices.
Six devices can be stored in its memory. 6 USB-C Dongle overview Overview The -3/,FRQ5% BT Dongle is a Bluetooth host device that allows Bluetooth headsets to be paired with it. 1#"12/"03&0&)"/"Ɲ" 1,/1%1!&0-)60/"!Ǿ)2"Ǿ,/-2/-)")&$%1ǽ LED Status indicator LED colour and action Power on Red LED on Pairing mode Red & Blue toggle -> 1 min time out Headset paired Blue LED on Ǘ*,!"2/-)",+ǔ,ƛțƝ0%&+$Ȝ Ǘ-)62/-)",+ǔ,ƛțƝ0%&+$Ȝ *,!")2",+ǔ,ƛț#01Ɲ0%&+$Ȝ Pairing %"+1%"!,+$)"&0&+-&/&+$*,!"Ǿ1%"!,+$)"4&))Ɲ0%)2"+! red. If pairing is successful, the blue LED will be displayed. 7 Start a call Short press the call accept button to open the line, select the -"/0,+6,24,2)!)&("1, ))3&6,2/0,ƞ-%,+"&# ,++" 1"! to your computer, or from your contacts list if connected to your mobile phone. Cancel a call When dialling, short press the call accept/end button before the opposite side pick up. Answer/accept a call When there is an incoming call, short press the call accept/end button. Reject/end a call When there is an incoming call, long press the call accept/end button for 3 seconds. Last number redial Short press the call accept/end button twice. New incoming call during a call, end the current call and pick up new call Short press the call accept/end button. New incoming call during a call, reject new call and keep on the current call Short press the call accept/end button twice. Hang up / end call During the call, short press the call accept/end button. Volume up Scroll the wheel clockwise. Volume down Scroll the wheel anti-clockwise. Mute During a call, short press the Mute button. How to make a call Call accept/ end button Mute Volume wheel button 8 How to play music Play music &/01"+)")2"1,,1%,+6,2/!"3& "Ǿ1%"+-216,2/%"!0"1in pairing mode. Next, select your -3/,FRQ5% headset from the list of available devices in your device’s Bluetooth settings to connect, start playing music from your desired app. If connected but no sound is playing, check your device’s settings to ensure that media audio is enabled for the headset. Pause music When music is playing, short press the volume wheel button. Play music When music is paused, short press the volume wheel button. Play next track When music is playing, short press the volume wheel button twice. Play previous track When music is playing, short press the volume wheel button three times. Volume up Scroll the wheel clockwise. Volume down Scroll the wheel anti-clockwise. 21,,+ȡ,ƛ*20& The headset will play music while the headset is on your head, +!1%"*20& 4&))-20"4%"+6,21("1%"%"!0"1,ƛ,# your head. ,+ȡ,ƛȡ%"/Ȓ1%/2 Short press the ANC button, the voice prompt will say “ANC on” in your headset. "/Ȓ1%/21" %+,),$6*-)&Ɯ"002//,2+!&+$0,2+!00,1%1 you hear conversations or announcements if needed while wearing the headset. Call accept/ end button Mute Volume wheel button ANC button 9 DND indicator light DND indicator light The DND LED lights on your -3/,FRQ5% headset light up red when you are on a call to indicate to colleagues that you areRQDFDOODQGVKRXOGQRWEHGLVWXUEHG0RUHLQIR needed please 10 Mute via the microphone boom To mute the microphone during a call )&-2-1%"*& /,-%,+",,*/*1,)&$+4&1%1%"%"!+!Ǿ you will be able to hear the conversation but the caller on the other end of the call will not be able to hear you. To unmute the microphone during a call )&-!,4+1%"*& /,-%,+",,*/*1,)&$+4&1%1%"0&!"…

Text truncated - open the document above for the full version.

JPLTelecomLLC 2.911(d)(7)USAAgentv1.5 Section2.911(d)(7)USAAgentforServiceofProcess Companyname:JPLTelecomLLC Address:JPLTelecomLLC445WMerrittAvenueMERRITTISLANDFlorida 32953-4760UnitedStates FCCID:2BFHC-ICON300 2.911(d)(7)USADesignatedAgentforServiceofProcess We,[JPLTelecomLLC](“theapplicant”)designate[JPLTelecomLLC] NOTE1 forthe purposeofacceptingserviceofprocessonbehalfoftheapplicant. Applicantconsent:Weacknowledgeourconsenttoacceptserviceofprocessinthe UnitedStatesformattersrelatedtotheapplicableequipment,andatthephysicalU.S. addressandemailaddressofthedesignatedagentandacknowledgeour acceptanceofourobligationtomaintainanagentforserviceofprocessintheUnited Statesfornolessthanoneyearaftereitherwethegranteehavepermanently terminatedallmarketingandimportationoftheapplicableequipmentwithintheU.S., orattheconclusionofanyCommission-relatedadministrativeorjudicialproceeding involvingtheequipment,whicheverislater. Agentobligation:Weacknowledgeourobligationtoacceptserviceofprocessinthe UnitedStatesformattersrelatedtotheapplicableequipmentatourphysicalU.S. addressandemailaddressfornolessthanoneyearaftereitherthegranteehas permanentlyterminatedallmarketingandimportationoftheapplicableequipment withintheU.S.,orattheconclusionofanyCommission-relatedadministrativeor judicialproceedinginvolvingtheequipment,whicheverislater. USAAgent&Applicant Companyname:JPLTelecomLLC USAAddress:JPLTelecomLLC445W MerrittAvenueMERRITTISLANDFlorida 32953-4760UnitedStates FRNNumber:0034729418 ContactName:JamesClarke TelephoneNo:3213001141 Email:[email protected] Signature: Title:Manager Date:Dec.02,2025 NOTE1:AnapplicantlocatedintheUnitedStatesmaydesignateitselfastheagentforservice ofprocess. JPLTelecomLLC 2.911(d)(7)USAAgentv1.5 Reference;FederalRegisterdocument2022-28263publishedon02/06/23 https://www.federalregister.gov/documents/2023/02/06/2022-28263/protecting-against-nation al-security-threats-to-the-communications-supply-chain-through-the

JPLTelecomLLC、 JPLTelecomLLC445WMerrittAvenueMERRITTISLANDFlorida32953-4760UnitedStates AttestationStatements NotCoveredEntityApplicant&NotCoveredEquipment To:FederalCommunicationsCommissionDate:Dec.02,2025 7435OaklandMillsRoad, Columbia,MD21046,USA Ref:InformationRequiredbySection2.911(d)(5)(i)&(ii) FCCID:2BFHC-ICON300 JPLTELECOMLTD(“theapplicant”)certifiesthat,asofthedateofthefilingoftheapplication,the applicantisnotidentifiedontheCoveredList,establishedpursuantto§1.50002ofreferencechapter, asanentityproducing“covered”communicationequipment.Theequipmentforwhichauthorizationis soughtisnot“covered”telecommunicationsequipmentandvideosurveillanceequipmentproducedby entitiesidentifiedontheCommission’sCoveredListthatprohibitedfromreceivinganequipment authorizationpursuanttosection§2.903oftheFCCrules. Sincerelyyours, ApplicantSignature PrintedName:JamesClarke Title:Manager Address:JPLTelecomLLC445WMerrittAvenueMERRITTISLANDFlorida32953-4760UnitedStates Tel.:3213001141 Email:[email protected]

JPL Telecom LLC JPL Telecom LLC 445 W Merritt Avenue MERRITT ISLAND Florida 32953-4760 United States 1 | P a g e Attestation Statements To: Federal Communications Commission Date: Dec. 02, 2025 7435 Oakland Mills Road, Columbia, MD 21046, USA Subject: Attestation of Compliance with FCC Covered List Software Requirements FCC ID: 2BFHC-ICON300 Product Name: Bluetooth Headset This letter serves as an attestation that the equipment identified above ☐ is / ☒ is not (select one) "covered" software as defined under the Federal Communications Commission (FCC) Covered List requirements, as outlined in FCC 22-84 and KDB 986446. Specifically, the undersigned certifies that the equipment for which authorization is sought: 1. Does not contain cybersecurity or anti-virus software produced or provided by Kaspersky Lab, Inc. or any of its successors, assignees, parents, subsidiaries, affiliates, or any entity that has rebranded or relabeled software produced by the aforementioned entities. 2. Does not have the capability to store, run, or deliver any software identified on the FCC Covered List, including but not limited to cybersecurity and anti-virus software. To support this attestation, the appendix evaluation documentation has been prepared and is included in the certification filing. This attestation is based on a thorough evaluation of the device's design, functionality, and software environment. The undersigned affirms that the information provided is accurate and complete to the best of their knowledge. Sincerely yours, Applicant Signature Printed Name: James Clarke Title: Manager Address: JPL Telecom LLC 445 W Merritt Avenue MERRITT ISLAND Florida 32953-4760 United States Tel.: 3213001141 Email: [email protected] JPL Telecom LLC JPL Telecom LLC 445 W Merritt Avenue MERRITT ISLAND Florida 32953-4760 United States 2 | P a g e Evaluation regarding to the Covered List Software: Compliance Methodology Evaluation Process Results Device is Inherent compliance ☒ The Chipset(s) used is limited to run the Cybersecurity or anti-virus software. Compliance ☐ The Memory used is limited to run the Cybersecurity or anti-virus software. Compliance ☐ There is storage capacity limitation for store or install the Cybersecurity or anti-virus software. Compliance ☐ Operating system used is limited to run, install or deliver the Cybersecurity or anti-virus software. Compliance Device is not Inherent compliance ☐ Evaluation Based on Software Bill of Materials (SBoM) See attached “SBoM“ Note:The SBoM content is limited to the scope of covered list software (e.g. antivirus and cybersecurity software). ☐ Evaluation Based on Scan for Software on the device ☐ Evaluation Based on Filesystem scan ☐ Evaluation Based on Running software check

JPLTelecomLLC、 JPLTelecomLLC445WMerrittAvenueMERRITTISLANDFlorida32953-4760UnitedStates OfficeofEngineeringTechnology FederalCommunicationsCommission 7435OaklandMillsRoad Columbia,MD21046 USA Date:Dec.02,2025 Subject;RequestforConfidentiality FCCID:2BFHC-ICON300 ToWhomItMayConcern, PursuanttotheprovisionsoftheCommission’srulesTitle47Sections§0.457and§0.459,we arerequestingtheCommissiontowithholdthefollowingattachment(s)asconfidential documentsfrompublicdisclosureindefinitely. Thesedocumentscontaindetailedsystemandequipmentdescriptionsandareconsideredas proprietaryinformationinoperationoftheequipment.Thepublicdisclosureofthesedocuments mightbeharmfultoourcompanyandwouldgivecompetitorsanunfairadvantageinthemarket. SchematicDiagram BlockDiagram OperationalDescription Inadditionaltoabovementioneddocuments,inordertocomplywiththemarketingregulations inTitle47CFR§2.803andtheimportationrulesinTitle47CFR§2.1204,whileensuringthat businesssensitiveinformationremainsconfidentialuntiltheactualmarketingofnewly authorizeddevices,werequestShortTermConfidentialityofthefollowingattachment(s); ExternalPhotos TestSetupPhotos InternalPhotos UserManual For45days,pursuanttoPublicNoticeDA04-1705. OR For180dayspursuanttoKDB726920D01. Itisourunderstandingthatallmeasurementtestreports,FCCIDlabelformatand correspondenceduringthecertificationreviewprocesscannotbegrantedasconfidential documentsandthisinformationwillbeavailableforpublicreviewoncethegrantofequipment authorizationisissued. Sincerely, Signature: Name:JamesClarke Title:Manager

JPL Telecom LLC JPL Telecom LLC 445 W Merritt Avenue MERRITT ISLAND Florida 32953-4760 United States Dec. 02, 2025 Federal Communications Commission Authorization and Evaluation Division 7435 Oakland Mills Road Columbia, MD 21046 Subject: Agent Authorization for FCC ID: 2BFHC-ICON300 I, the undersigned, hereby authorize (Attestation of Global Compliance (Shenzhen) Co., Ltd) to act on our behalf in all matters relating to this application for equipment certification. Any act carried out by (Attestation of Global Compliance (Shenzhen) Co., Ltd) shall have the same effect as our own and I acknowledge that all responsibility for complying with the terms and conditions of certification, as specified by DERYCOM CERTIFICATION SERVICES, INC., still resides with JPL Telecom LLC. We certify that we are not subject to a denial of federal benefits that includes FCC benefits pursuant to Section 5301 of the Anti-Drug Abuse Act of 1988, 21 U.S.C. §862, and that no party to the application, as defined in 47 CFR §1.2002(b), is subject to a denial of federal benefits that includes FCC benefits pursuant to that section. Sincerely, (Signature) Full name of contact person listed on FCC’s website: James Clarke Title: Manager Address: JPL Telecom LLC 445 W Merritt Avenue MERRITT ISLAND Florida 32953-4760 United States Tel.: 3213001141 Email: [email protected]

Report No.: AGC09677250801AP03 Page 1 of 4 EXTERNAL PHOTOS TOP VIEW OF EUT BOTTOM VIEW OF EUT Report No.: AGC09677250801AP03 Page 2 of 4 FRONT VIEW OF EUT BACK VIEW OF EUT Report No.: AGC09677250801AP03 Page 3 of 4 LEFT VIEW OF EUT RIGHT VIEW OF EUT Report No.: AGC09677250801AP03 Page 4 of 4 PORT VIEW OF EUT ****************************************End of Report*************************************

FCC ID Label Location 5mm*20mm FCC ID:2BFHC-ICON300

Report No.: AGC09677250801AP03 Page 1 of 5 INTERNAL PHOTOS OPEN VIEW OF EUT INTERNAL VIEW OF EUT (FIGURE 1) Report No.: AGC09677250801AP03 Page 2 of 5 INTERNAL VIEW OF EUT (FIGURE 2) INTERNAL VIEW OF EUT (FIGURE 3) Report No.: AGC09677250801AP03 Page 3 of 5 INTERNAL VIEW OF EUT (FIGURE 4) INTERNAL VIEW OF EUT (FIGURE 5) BT Antenna Report No.: AGC09677250801AP03 Page 4 of 5 INTERNAL VIEW OF EUT (FIGURE 6) INTERNAL VIEW OF EUT (FIGURE 7) Report No.: AGC09677250801AP03 Page 5 of 5 BATTERY VIEW OF EUT -----End of Report-----

Page 1 of 10 RF Exposure Report Report No.: AGC09677250801FH01 FCC ID : 2BFHC-ICON300 APPLICATION PURPOSE : Original Equipment PRODUCT DESIGNATION : Bluetooth Headset BRAND NAME : JPL MODEL NAME : JPL-Icon 300-RB APPLICANT : JPL Telecom LLC DATE OF ISSUE : Dec. 02, 2025 STANDARD(S) : FCC Part 2 Subpart J §2.1093 FCC KDB 447498 D01 V06 REPORT VERSION : V1.0 Attestation of Global Compliance (Shenzhen) Co., Ltd Report No.: AGC09677250801FH01 Page 2 of 10 Report Revise Record Report Version Revise Time Issued Date Valid Version Notes V1.0 / Dec. 02, 2025 Valid Initial Release Report No.: AGC09677250801FH01 Page 3 of 10 Table of Contents 1. General Information ........................................................................................................................................ 4 2. Product Information ........................................................................................................................................ 5 2.1 Product Technical Description ................................................................................................................... 5 3. Test Environment ............................................................................................................................................ 6 3.1 Address Of The Test Laboratory ............................................................................................................... 6 3.2 Test Facility ................................................................................................................................................ 6 3.3 Environmental Conditions ......................................................................................................................... 7 4. Portable Device Evaluation Method and Limit ............................................................................................. 8 5. Measurement Results ..................................................................................................................................... 9 6. Measurement Evaluation ................................................................................................................................ 9 Report No.: AGC09677250801FH01 Page 4 of 10 1. General Information Applicant JPL Telecom LLC Address JPL Telecom LLC 445 W Merritt Avenue MERRITT ISLAND Florida 32953-4760 United States Manufacturer JPL Telecom Limited Address Units 1 & 2, Church Close Business Park, Todber, Sturminster Newton, Dorset, DT10 1JH, England Factory Antonio International Limited Address Unit 3, 21/F, China United Plaza, 1008 Tai Nan West Street, Cheung Sha Wan, Kowloon, Hong Kong Product Designation Bluetooth Headset Brand Name JPL Test Model JPL-Icon 300-RB Series Model(s) N/A Difference Description N/A Date of receipt of test item Sep. 02, 2025 Date of Test Sep. 02, 2025~Dec. 02, 2025 Deviation from Standard No any deviation from the test method Condition of Test Sample Normal Test Result Pass Test Report Form No AGCER-FCC-RF Exposure-V1 Note: The test results of this report relate only to the tested sample identified in this report. Prepared By Thea Huang (Project Engineer) Dec. 02, 2025 Reviewed By Bibo Zhang (Reviewer) Dec. 02, 2025 Approved By Angela Li (Authorized Officer) Dec. 02, 2025 Report No.: AGC09677250801FH01 Page 5 of 10 2. Product Information 2.1 Product Technical Description Frequency Band (Operating) WLAN: 2.412GHz ~ 2.462GHz WLAN: 5.18GHz ~ 5.32GHz / 5.50GHz ~ 5.70GHz WLAN: 5.745GHz ~ 5825GHz Bluetooth: 2.402GHz ~ 2.480GHz Other: Hardware Version V4 Software Version V1.0 Modulation Type BR GFSK, EDR π /4-DQPSK, 8DPSK LE GFSK 1Mbps GFSK 2Mbps Device Category Portable (<20cm separation) Mobile (>20cm separation) Others: Antenna Diversity Single antenna Multiple antennas Tx diversity Rx diversity Tx/Rx diversity Antenna Designation Ceramic Antenna Antenna Gain 4.34Bi Minimum Assessment Distance 5mm Evaluation Applied MPE Evaluation SAR Evaluation Report No.: AGC09677250801FH01 Page 6 of 10 3. Test Environment 3.1 Address Of The Test Laboratory Laboratory: Attestation of Global Compliance (Shenzhen) Co., Ltd. Address: 1-2/F, Building 19, Junfeng Industrial Park, Chongqing Road, Heping Community, Fuhai Street, Bao'an District, Shenzhen, Guangdong, China 3.2 Test Facility The test facility is recognized, certified, or accredited by the following organizations: CNAS-Lab Code: L5488 Attestation of Global Compliance (Shenzhen) Co., Ltd. has been assessed and proved to follow CNAS-CL01 Accreditation Criteria for Testing and Calibration Laboratories (identical to ISO/IEC17025: 2017 General Requirements for the Competence of Testing and Calibration Laboratories.) A2LA-Lab Cert. No.: 5054.02 Attestation of Global Compliance (Shenzhen) Co., Ltd. EMC Laboratory has been accredited by A2LA for technical competence in the field of electrical testing, and proved to follow ISO/IEC 17025: 2017 General Requirements for the Competence of Testing and Calibration Laboratories and any additional program requirements in the identified field of testing. FCC-Registration No.: 975832 Attestation of Global Compliance (Shenzhen) Co., Ltd. EMC Laboratory has been registered and fully described in a report filed with the FCC (Federal Communications Commission). The acceptance letter from the FCC is maintained in our files with Registration 975832. IC-Registration No.: 24842(CAB identifier: CN0063) Attestation of Global Compliance (Shenzhen) Co., Ltd. EMC Laboratory has been registered and fully described in a report filed with the Certification and Engineering Bureau of Industry Canada. The acceptance letter from the IC is maintained in our files with Registration 24842. Report No.: AGC09677250801FH01 Page 7 of 10 3.3 Environmental Conditions Normal Conditions Temperature range (°C) 15 - 35 Relative humidity range 20 % - 75 % Pressure range (kPa) 86 - 106 Power supply DC 3.7V by battery or DC 5V by adapter Report No.: AGC09677250801FH01 Page 8 of 10 4. Portab…

Text truncated - open the document above for the full version.

Ceramic Ant enna 3216 Si ze 2400-2500 MHz 恒信达通信 Shenzhen HengXinDa Technology Co., Ltd. SPECIFICATION Page1 of 8 P/N: HXD-BTD05 HXD-3216ANT-BTD05-V1.0 Address: 3rd Floor, Huihuang Comprehensive Building, Tongsheng Community, DalangRoad, Longhua New District, Shenzhen, Guangdong, China For Miniaturized Bluetooth System 3. Dimensions (Unit : mm) 1). Over View : 1. Frequency 2400-2500 MHz Shenzhen Hengxinda Technology Co., Ltd. 2. Applications Page2 of 8 2).PCBLYOUTVIEW: HXD-3216ANT-BTD05-V1.0 Part Number Central Frequency 2450 MHz Bandwidth100(typ.) MHz V.S.W.R≤2.0 Peak Gain4.34 dB i Impedance50 Ohm PolarizationLinear Azimuth BeamwidthOmni-directional Shenzhen Hengxinda Technology Co., Ltd. 4. Evaluation Board Size and Matching Circuits 4.7 nH 0.5 pF 5. Electrical Characteristics Page3 of 8 HXD3216ANT2450-BTD05 Frequency (MHz)240024502500 Efficiency (dB)-1.87-1.67-1.94 Efficiency (%)656864 Gain (dBi) 3.124.343.45 Shenzhen Hengxinda Technology Co., Ltd. Radiation Pattern & Efficiency 6. Return Loss (S11) Page4 of 8 7. HXD-3216ANT-BTD05-V1.0 Packaging and Dimensions . Plastic Tape Shenzhen Hengxinda Technology Co., Ltd. 8. Reflow Soldering Standard Condition Page5 of 8 9. HXD-3216ANT-BTD05-V1.0 . Remarks for Package Reserve a length of 150 ~200mm for the trailer of the carrier and 250 ~300 mm for the leader of the carr er and further 250mm of cover tape at the leading part of the carrier. . Reel (6000 pcs/Reel) . Storage Period Oxidizable Material, 12 months in vacuum sealed bag, please repack within 168 hours by re-seal the package treatment after using. Storage Temperature Range : <30 degree C, Humidity : <60%RH Shenzhen Hengxinda Technology Co., Ltd. Page6 of 8 HXD-3216ANT-BTD05-V1.0 Test itemTest condition / Test methodSpecification Solderability IEC 60068-2-58 GB/T2423.28 *Solder bath temperature：240：5°C *Immersion time：2：0.5 sec Solder：Sn96.5Ag3.0Gu0.5 for lead-free. At least 95% of a surface of each terminal electrode must be covered by fresh solder. Leaching (Resistance to dissolution of metallization) JIS C5101 *Solder bath temperature：260：5°C * Leaching immersion time：10：1 sec Solder : Sn96.5 Ag3.0 Gu0.5 for lead-free. Loss of metallization on the edges of each electrode shall not exceed 25%. Resistance to soldering heat IEC 60068-2-58 GB/T2423.28 *Preheating temperature：120 ~150°C, 1 minute. *Solder temperature：260：5°C *Immersion time：10：1 sec Solder： Sn96.5Ag3.0Gu0.5 for lead-free Measurement to be made after keeping at room temperature for 24：2 hrs. No mechanical damage. Electrical specification shall satisfy the descriptions in electrical characteristics at the room temperature. Loss of metallization on the edges of each electrode shall not exceed 25%. Drop Test IEC 60068-2-32 GB/T2423.8 Customer’s specification. *Height：50 cm *Test Surface: Rigid surface of concrete or steel. *Times：6 surfaces for each units ；2 times for each side. No mechanical damage. Electrical specification shall satisfy the descriptions in electrical characteristics at the room temperature. Vibration IEC 60068-2-6 GB/T 2423.10 *Frequency：10Hz ~55Hz ~10Hz(1min) *Total amplitude ：1.5mm *Test times：6hrs.(Two hrs each in three mutually perpendicular directions) No mechanical damage. Electrical specification shall satisfy the descriptions in electrical characteristics at the room temperature. Adhesive Strength of Termination IEC60068-2-21 GB/T 2423.6 *Pressurizing force： 5N(≦0603)；10N( >0603) *Test time:10：1 sec No remarkable damage or removal of the termination. Shenzhen Hengxinda Technology Co., Ltd. 10.Dependability Test Page7 of 8 HXD-3216ANT-BTD05-V1.0 Bending test IEC 60068-2-21 GB/T 2423.29 The middle part of substrate shall be pressurized by means of the pressurizing rod at a rate of about 1 mm/s per second until the deflection becomes 2mm and then pressure shall be maintained for 10：1 sec. Measurement to be made after keeping at room temperature for 24：2 hours. No mechanical damage. Electrical specification shall satisfy the descriptions in electrical characteristics at the room temperature. Temperature cycle IEC60068-2-14 GB/T 2423.22 30 minutes at-40°C：2°C. 10 ~15 minutes at room temperature. 30minutes at +85°C：2°C . 10 ~15 minutes at room temperature. Total 100 continuous cycles Measurement to be made after keeping at room temperature for 24：2 hrs. No mechanical damage. Electrical specification shall satisfy the descriptions in electrical characteristics at the room temperature. High temperature IEC 60068-2-2 GB/T2423.2 *Temperature：85：2°C . *Test duration：500+24/-0 hours. Measurement to be made after keeping at room temperature for 24：2 hrs. No mechanical damage. Electrical specification shall satisfy the descriptions in electrical characteristics. Humidity (steady conditions) IEC60068-2-3 GB/T 2423.3 *Humidity：85：5%R.H. *Temperature：85：2°C . *Time：500+24/-0 hrs. Measurement to be made after keeping at room temperature for 24：2 hrs ※ 200hrs measuring the first data then 300hrs data. No mechanical damage. Electrical specification shall satisfy the descriptions in electrical characteristics at the room temperature. Low temperature IEC 60068-2-1 GB/T2423.1 *Temperature：-40：2°C . *Test duration：500+24/-0 hours Measurement to be made after keeping at room temperature for 24：2 hrs. No mechanical damage. Electrical specification shall satisfy the descriptions in electrical characteristics at the room temperature. Shenzhen Hengxinda Technology Co., Ltd. Page8 of 8 HXD-3216ANT-BTD05-V1.0

Page 1 of 67 FCC Test Report Report No.: AGC09677250801FR02 FCC ID : 2BFHC-ICON300 APPLICATION PURPOSE : Original Equipment PRODUCT DESIGNATION : Bluetooth Headset BRAND NAME : JPL MODEL NAME : JPL-Icon 300-RB APPLICANT : JPL Telecom LLC DATE OF ISSUE : Dec. 02, 2025 STANDARD(S) : FCC Part 15 Subpart C §15.247 REPORT VERSION : V1.0 Attestation Of Global Compliance (Shenzhen) Co., Ltd Report No.: AGC09677250801FR02 Page 2 of 67 Report Revise Record Report Version Revise Time Issued Date Valid Version Notes V1.0 / Dec. 02, 2025 Valid Initial Release Report No.: AGC09677250801FR02 Page 3 of 67 Table of Contents 1. General Information ........................................................................................................................................ 5 2. Product Information ........................................................................................................................................ 6 2.1 Product Technical Description ................................................................................................................... 6 2.2 Test Frequency List ................................................................................................................................... 6 2.3 Related Submittal(S) / Grant (S) ............................................................................................................... 7 2.4 Test Methodology ...................................................................................................................................... 7 2.5 Special Accessories .................................................................................................................................. 7 2.6 Equipment Modifications ........................................................................................................................... 7 2.7 Antenna Requirement................................................................................................................................ 7 3. Test Environment ............................................................................................................................................ 8 3.1 Address of the Test Laboratory ................................................................................................................. 8 3.2 Test Facility ................................................................................................................................................ 8 3.3 Environmental Conditions ......................................................................................................................... 9 3.4 Measurement Uncertainty ......................................................................................................................... 9 3.5 List of Equipment Use .............................................................................................…

Text truncated - open the document above for the full version.