2BG4HJY-01Foldable Wireless Charger Alarm Clock

Product Name Product Model JY - 01 Product Parameters Please read carefully before use Color Box, Product, 20W Adapter, Cable, User Manual. Packing List User Guide Thank you for your purchase. The product comes with a 12-month warranty period. If you have any issues about the product, please feel free to contact us at any time. Our email is: [email protected] Customer after-sale service M O N Clock And Night Light Folding Phone Wireless Charger Included in the box is a USB-C Charge Cable, Product, Adapter that supports fast charging and is compatible with USB-C power adapter and product port. Clock And Night Light Folding Phone Wireless Charger Input Voltage 12V Material ABS Phone Output 5W/7.5W/10W Product Size 160 x 115 x 120 mm 3. Night Light Key Turn the power switch to "ON", The product is working normally. Turn the power switch to "OFF", The product will be shut down. 2. Power ON/OFF Switch 1. Charging The Product Long press "Alarm 1 Set" key for 1.5 seconds to enter the alarm clock 1 setting and the "hour" is flashing, then press + or – key to select. Then short press "Alarm 1 Set" key to enter the "minute" flashing, press + or – key to select. Lastly, short press "Alarm 1 Set" key or wait for 5 seconds to confirm the alarm and return to time display. If you want to check alarm clock 1, please short press "Alarm 1 Set", Alarm Clock 1 time will be displayed 3 seconds. Short press this button to turn on light. Short press this button to select light colors. Long press this button to turn off the night light. The light colors include RGB, white, orange, yellow, purple, blue, light blue, green, red. Short press this button to reset the factory settings. Turn the alarm 1 switch to "ON", alarm 1 will turn on, and the indicator light for alarm 1 will turn on. Turn the alarm 1 switch to "OFF", alarm 1 will turn off, and the indicator light for alarm 1 will turn off. 4.Reset Key 5.Alarm Clock 1 Switch 6.Alarm Clock 1 Setting In clock mode, short press "Snooze / Light Setting" Button to adjusts the brightness of display screen in 4 Levels: Brightest, Medium Bright, Slightly Bright, Dark. During alarm, press button except "Snooze / Light Setting" will turn off the alarm for the day. Long press "clock setting" key for 1.5 seconds to enter the clock setting and the "hour" is flashing, then press + or – key to select. Then short press "clock setting" key to enter the "minute" flashing, press + or – key to select. Then short press "clock setting" key to enter the "week" flashing, press + or – key to select. Lastly, short press " key or wait for 5 seconds to confirm the time and return to time display. In time display mode, short press this key to switch between 12 or 24 hour format. "clock setting 7.Clock Setting 8. Tunes Setting (Volume/Ringtone setting) Long press "Tunes Set" key for 1.5 seconds to enter the tunes setting and the "Volume" is flashing, then press + or – key to select. Then short press "Tunes Set" key to enter the "Ringtone" flashing, press + or – key to select. Lastly, short press "Tunes Set" key or wait for 5 seconds to confirm the ringtone and return to time display. If you want to check Volume and Ringtone, please short press "Tunes Set", Volume and Ringtone will be displayed 5 seconds. There are 8 ringtones. Including Beep, Birdsong, Rooster Crowing, Bonfire, Canon Piano, Alice Piano, Piano Information, Telephone Ringtone. Turn the alarm 2 switch to "ON", alarm 2 will turn on, and the indicator light for alarm 2 will turn on. Turn the alarm 2 switch to "OFF", alarm 2 will turn off, and the indicator light for alarm 2 will turn off. 9. Snooze / Light Setting When the alarm goes off and the "Snooze / Light Setting" Button is pressed, the indicator light on the clock alarm will flash. The alarm will temporarily stop until 9 minutes. The Snooze function is set to a maximum of 3 times, after which the alarm for the day will be turned off. If the "Snooze / Light Setting" button is not pressed, the alarm will turn off for the day after 30 minutes of ringing. 10.Up Key In clock mode, The time separator does not flash by default. Long press the "UP" button for 1.5 seconds to switch to flashing. In setup mode, cooperate with modifying parameters. In setup mode, cooperate with modifying parameters. 11.Down Key 12.Alarm Clock 2 Setting Long press "Alarm Clock 2 Set" key for 1.5 seconds to enter the alarm clock 2 setting and the "hour" is flashing, then press + or – key to select. 13.Alarm Clock 2 Switch If the product battery is out of power, the battery indicator light will flash. If product still doesn't charge, product will automatically shut down. Time memory protection function activated. 14. Power off time memory protect function FCC STATEMENT This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. Changes or modifications to this unit not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment. NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures: -- Reorient or reloca…

Text truncated - open the document above for the full version.

Shenzhen Jiuyang Technology Co., Ltd Room 401, Building 7, Yahao Xuan, No. 502 Jian'an 1st Road, Wenhui Community, Xin'an Street, Bao'an District, Shenzhen, China Federal Communications Commission Authorization and Evaluation Division Equipment Authorization Branch 7435 Oakland Mills Road Columbia, MD 21046 6/21/2024 U.S. Agent Designation Shenzhen Jiuyang Technology Co., Ltd acknowledges their consent for the following contact located in the United States to act as their agent for service of process for the equipment for which authorization is sought (FCC ID: 2BG4HJY-01): Name and company of U.S. agent: Formates LLC Physical U.S. address of agent: 1400 Hudson St, Hoboken, New Jersey, 07030, USA FRN of U.S. agent: 0033456468 Email address of U.S. agent: [email protected] Formates LLC acknowledges their obligation to accept service of process on behalf of Shenzhen Jiuyang Technology Co., Ltd. Shenzhen Jiuyang Technology Co., Ltd with the FRN 0035577006 accepts its obligation to maintain an agent for service of process in the United States for no less than one year after either the grantee has permanently terminated all marketing and importation of the applicable equipment within the U.S., or the conclusion of any Commission-related administrative or judicial proceeding involving the equipment, whichever is later. By signing this form, we confirm the above and that we are aware of the application requirements listed under § 2.911(d)(7). The information provided in this letter is based on the referenced rule parts of Title 47 of the CFR as well as KDB 986446 D01. An expiration date for this letter does not exist. In case the U.S. agent changes, the grantee is obligated to notify the FCC within 30 days via the granting TCB. Sincerely, Signature Jacky Ding Certification Contact Shenzhen Jiuyang Technology Co., Ltd Signature Abi Aribisala Project Manager Formates LLC 48_[mo del] US_Agent_2.911(d)(7) - U, V0 5

Shenzhen Tongzhou Testing Co.,Ltd FCC ID: 2BG4HJY-01 This report shall not be reproduced except in full, without the written approval of Shenzhen Tongzhou Testing Co.,Ltd Page 1 of 4 EXTERIOR PHOTOGRAPHS OF EUT Fig.1 Fig.2 Shenzhen Tongzhou Testing Co.,Ltd FCC ID: 2BG4HJY-01 This report shall not be reproduced except in full, without the written approval of Shenzhen Tongzhou Testing Co.,Ltd Page 2 of 4 Fig.3 Fig.4 Shenzhen Tongzhou Testing Co.,Ltd FCC ID: 2BG4HJY-01 This report shall not be reproduced except in full, without the written approval of Shenzhen Tongzhou Testing Co.,Ltd Page 3 of 4 Fig.5 Fig.6 Shenzhen Tongzhou Testing Co.,Ltd FCC ID: 2BG4HJY-01 This report shall not be reproduced except in full, without the written approval of Shenzhen Tongzhou Testing Co.,Ltd Page 4 of 4 Fig.7

Label Location: FCC ID: 2BG4HJY-01

Shenzhen Tongzhou Testing Co.,Ltd FCC ID: 2BG4HJY-01 This report shall not be reproduced except in full, without the written approval of Shenzhen Tongzhou Testing Co.,Ltd Page 1 of 3 INTERIOR PHOTOGRAPHS OF EUT Fig.1 Fig.2 Antenna Shenzhen Tongzhou Testing Co.,Ltd FCC ID: 2BG4HJY-01 This report shall not be reproduced except in full, without the written approval of Shenzhen Tongzhou Testing Co.,Ltd Page 2 of 3 Fig.3 Fig.4 Shenzhen Tongzhou Testing Co.,Ltd FCC ID: 2BG4HJY-01 This report shall not be reproduced except in full, without the written approval of Shenzhen Tongzhou Testing Co.,Ltd Page 3 of 3 Fig.5

Report No.: TZ240605811-E2 Page 1 of 9 FCC TEST REPORT Test report On Behalf of Shenzhen Jiuyang Technology Co., Ltd For Foldable Wireless Charger Alarm Clock Model No.: JY - 01 FCC ID: 2BG4HJY-01 Prepared for : Shenzhen Jiuyang Technology Co., Ltd Room 401, Building 7, Yahao Xuan, No. 502 Jian’an 1st Road, Wenhui Community, Xin’an Street, Bao’an District, Shenzhen, China Prepared By : Shenzhen Tongzhou Testing Co.,Ltd 1th Floor, Building 1, Haomai High-tech Park, Huating Road 387, Dalang Street, Longhua, Shenzhen, China Date of Test: 2024/6/5 ~ 2024/6/13 Date of Report: 2024/6/14 Report Number: TZ240605811-E2 The test report apply only to the specific sample(s) tested under stated test conditions It is not permitted to copy extracts of these test result without the written permission of the test laboratory. Report No.: TZ240605811-E2 Page 2 of 9 TEST RESULT CERTIFICATION Applicant’s name ................. : Shenzhen Jiuyang Technology Co., Ltd Address ................................. : Room 401, Building 7, Yahao Xuan, No. 502 Jian’an 1st Road, Wenhui Community, Xin’an Street, Bao’an District, Shenzhen, China Manufacture's Name ............ : Shenzhen Jiuyang Technology Co., Ltd Address ................................. : Room 401, Building 7, Yahao Xuan, No. 502 Jian’an 1st Road, Wenhui Community, Xin’an Street, Bao’an District, Shenzhen, China Product description Trade Mark ............................ : N/A Product name ........................... : Foldable Wireless Charger Alarm Clock Model ..................................... : JY - 01 Standards ............................. : FCC Rules and Regulations Part 2.1091, ANSI C63.10: 2013 This publication may be reproduced in whole or in part for non-commercial purposes as long as the Shenzhen Tongzhou Testing Co.,Ltd is acknowledged as copyright owner and source of the material. Shenzhen Tongzhou Testing Co.,Ltd takes no responsibility for and will not assume liability for damages resulting from the reader's interpretation of the reproduced material due to its placement and context. Date of Test ............................................ : Date (s) of performance of tests ............. : 2024/6/5 ~ 2024/6/13 Date of Issue ........................................... : 2024/6/14 Test Result ............................................... : Pass Testing Engineer : (Allen Lai) Technical Manager : (Hugo Chen) Authorized Signatory : (Andy Zhang) Report No.: TZ240605811-E2 Page 3 of 9 1. GENERAL INFORMATION 1.1 General Description of EUT Equipment Foldable Wireless Charger Alarm Clock Model Name JY - 01 Model Difference N/A Test Model JY - 01 Trade Mark N/A FCC ID 2BG4HJY-01 Antenna Type Coil Antenna Antenna Gain 0dBi Operation frequency 110.5– 205 KHz Test Frequency 146.8 KHz Modulation Type ASK Power Rating Input: 12V1.5A Output: 5V1A, 7.5V1A, 9V1.12A (Wireless charger) Test Sample ID TZ240605811-1# Note: 1. For a more detailed features description, please refer to the manufacturer’s specifications or the User's Manual. The EUT antenna is Coil Antenna. No antenna other than that furnished by the responsible party shall be used with the device. Report No.: TZ240605811-E2 Page 4 of 9 2. SUMMARY OF TEST RESULTS 2.1 Test procedures according to the technical standards: FCC KDB680106 D01 RF Exposure Wireless Charging App v03r01 FCC CFR 47 Standard Section Test Item Judgment Remark FCC CFR 47 part1, 1.1310 KDB680106 D01v03r01 (3)(3) Electric Field Strength (E) (V/m) PASS Magnetic Field Strength (H) (A/m) PASS 2.2 MEASUREMENT UNCERTAINTY The reported uncertainty of measurement y ±U，where expended uncertainty U is based on a standard uncertainty multiplied by a coverage factor of k=2，providing a level of confidence of approximately 95 %。 No. Item Uncertainty 1 All emissions, radiated(<30M)(9KHz-30MHz) ±2.45dB 2 Temperature ±0.5°C 3 Humidity ±2% Report No.: TZ240605811-E2 Page 5 of 9 2.3 Test Instruments Equipment Manufacturer Model Serial no. Calibrated date Calibrated Due Magnetic field probe WAVECONTROL SMP2/WP400 19SN1101/19WP100558 2023-08-03 2024-08-02 NOTE: 1. The calibration interval of the above test instruments is 12 months. 2.4 Special Accessories No. Equipment Manufacturer Model 1 Wireless charger tester YBZ YBZ 2 AC adapter Xiaomi MDY-10-EH 2.5 Operation of EUT during testing Test Modes: Mode 1 AC/DC Adapter + EUT + Wireless charger tester (Load 10W) Record Mode 2 AC/DC Adapter + EUT + Wireless charger tester (Load 7.5W) Pre-test Mode 3 AC/DC Adapter + EUT + Wireless charger tester (Load 5W) Pre-test Note: All test modes were pre-tested, but we only recorded the worst case in this report. Report No.: TZ240605811-E2 Page 6 of 9 3. MAXIMUM PERMISSIBLE EXPOSURE Limit of Maximum Permissible Exposure Limits for Occupational / Controlled Exposure Frequency Range (MHz) Electric Field Strength (E) (V/m) Magnetic Field Strength (H) (A/m) Power Density (S) (mW/ cm²) Averaging Time |E|²,|H|² or S (minutes) 0.3-3.0 614 1.63 (100)* 6 3.0-30 1842 / f 4.89 / f (900 / f)* 6 30-300 61.4 0.163 1.0 6 300-1500 F/300 6 1500-100,000 5 6 Limits for General Population / Uncontrolled Exposure Frequency Range (MHz) Electric Field Strength (E) (V/m) Magnetic Field Strength (H) (A/m) Power Density (S) (mW/ cm²) Averaging Time |E|²,|H|² or S (minutes) 0.3-1.34 614 1.63 (100)* 30 1.34-30 824/f 2.19/f (180 / f)* 30 30-300 27.5 0.073 0.2 30 300-1500 F/1500 30 1500-100,000 1 30 Note 1: f = frequency in MHz ; *Plane-wave equivalent power density Note 2: For the applicable limit, see FCC 1.1310, D01 RF Exposure Wireless Charging App v03r01 Note 3: Emissions between 100 kHz to 300 kHz should be assessed versus the limits at 300 kHz in Table 1 of Section 1.1310: 614 V/m and 1.63 A/m. A KDB inquiry is required to determine the applicable exposure limits below 100 kHz. Report No.: TZ240605811-E2 Page 7 of 9 4. TEST PROCEDURE a. For devices designed for typical desktop applications, such a wireless charging pads, RF exposure evaluation should be conducted assuming a user …

Text truncated - open the document above for the full version.

承 认 书 SPECIFICATION FOR APPROVAL 客 户: CUSTOMER: 客 户 料 号： CUST P/N: 25.21005-1 煜 耀 料 号： YUYAO P/N: YY-1005 产品型号： D E S T: Ø20.5*0.08*105P*10TS-6.5UH-25MM/50*5.3*0.8双槽硬磁 日 期： DATE: 2023.3.16 版 本： VERSION: V1 制 定 PREPARED BY 审核 CHECKED BY 批准 APPROVED BY 客户承认 CUSTOMER APPROVE 郑少东姚振东曹前程 东莞市煜耀电子科技有限公司 DONGGUAN YUYAO ELECTRONIC TECHNOLOGY CO.,LTD 工厂地址：东莞市塘厦镇林村新太阳工业城21栋2-3楼 TEL:13717089408 FAX: 0769-82866409 DONGGUAN YUYAO ELECTRONIC TECHNOLOGY CO.,LTD 东莞市煜耀电子科技有限公司 TEL: 0769-82866410 FAX: 0769-82866409 版本变更履历 Version Change History 版本 Rev 变更前 Before Change 变更后 After Change 变更日期 Change Date 批准 Approved By A.0新发行2023.3.16 DONGGUAN YUYAO ELECTRONIC TECHNOLOGY CO.,LTD 东莞市煜耀电子科技有限公司 TEL: 0769-82866410 FAX: 0769-82866409 SPECIFICATION APPROVAL 产品型号： D E S T: Ø20.5*0.08*105P*10TS- 6.5UH-25MM/50*5.3*0.8双槽 硬磁 版 本： VERSION: V0 客 户: CUSTOMER: 0 客 户 料 号： CUST P/N: 25.21005-1 煜 耀 料 号： YUYAO P/N: YY-1005 一、尺寸 DIMENSION:(mm)A5.3±0.1 B50+0/-1 C20.5±0.5 D42.5±1 E25+2.5/-1 F3±1.5 G2.5MAX H0.8±0.1 I J K 备注：两根引线交接，两线之间缠8mm高温胶带，磁片背面 L 贴1MM 双面带胶 2.磁片为50*5.3*0.8MMT厚带双槽 制定/日期 PREPARED BY/DATE审核/日期 CHECKED BY/DATE 郑少东/2023.3.16姚振东/2023.3.16 DONGGUAN YUYAO ELECTRONIC TECHNOLOGY CO.,LTD 东莞市煜耀电子科技有限公司 TEL: 0769-82866410 FAX: 0769-82866409 SPECIFICATION APPROVAL 产品型号： D E S T: Ø20.5*0.08*105P*10TS- 6.5UH-25MM/50*5.3*0.8双槽 硬磁 版 本： VERSION: V0 客 户: CUSTOMER: 0 客 户 料 号： CUST P/N: 25.21005-1 煜 耀 料 号： YUYAO P/N: YY-1005 二、原理图 SCHEMATIC DIAGRAM: 三、绕线参数 WINDING SPECIFICATION: 序号 NO 端子 TERMINAL 线径 WIRE 圈数 TURNS 绕线方向 WINDING DIRECTION 1SF0.08*105P10TS逆时针 四、电气特性 ELECTRICAL CHARACTERISTICS: 温度 TEMPERATURE:25°C±10°C,湿度 RELATIVE HUMIDITY:65±20％ 序号 NO 项目 ITEM 端子 TERMINA L 标准 SPECIFICATION 测试条件 TEST FREQUENCY 测试仪器 TEST EQUIPMENTS 1INDS-F 3.8UH±10 ％ 单线圈 100KHZ/1VLCZ METER1062B 2INDS-F 6.5UH±10 ％ 带磁片 100KHZ/1VLCZ METER1062B 3DCRS-F64mΩ MAX1KHZ/1VTH2810 4Q值S-F47MIN100KHZ/1VLCZ METER1062B 制定/日期 PREPARED BY/DATE审核/日期 CHECKED BY/DATE 郑少东/2023.3.16姚振东/2023.3.16 DONGGUAN YUYAO ELECTRONIC TECHNOLOGY CO.,LTD 东莞市煜耀电子科技有限公司 TEL: 0769-82866410 FAX: 0769-82866409 SPECIFICATION APPROVAL 产品型号： D E S T: Ø20.5*0.08*105P*10TS- 6.5UH-25MM/50*5.3*0.8双槽 硬磁 版 本： VERSION: V0 客 户: CUSTOMER: 0 客 户 料 号： CUST P/N: 25.21005-1 煜 耀 料 号： YUYAO P/N: YY-1005 五，产品实物图 PRODUCT PICTURE 六、材料清单 MATERIAL LIST 序号 NO 材料名称 MATERIAL NAME 品名描述 DESCRIPTION 制造商 MANUFACTURER 1线 材0.08*105P丝包线RH 2磁 片Ø50*5.3*0.8mm L槽铁氧体磁片KHF 3锡 条高温环保锡DB 4胶 水BE885-9007BR 5胶 带 7mm高温胶带 6背 胶缺口双面胶 7包 装珍珠棉 备注：REMARK:以上物料符合ROHS 2.0+REACH环保要求 制定/日期 PREPARED BY/DATE审核/日期 CHECKED BY/DATE 郑少东/2023.3.16姚振东/2023.3.16 DONGGUAN YUYAO ELECTRONIC TECHNOLOGY CO.,LTD 东莞市煜耀电子科技有限公司 TEL: 0769-82866410 FAX: 0769-82866409

Report No.: TZ240605811-E1 Page 1 of 20 FCC TEST REPORT Test report On Behalf of Shenzhen Jiuyang Technology Co., Ltd For Foldable Wireless Charger Alarm Clock Model No.: JY - 01 FCC ID: 2BG4HJY-01 Prepared for : Shenzhen Jiuyang Technology Co., Ltd Room 401, Building 7, Yahao Xuan, No. 502 Jian’an 1st Road, Wenhui Community, Xin’an Street, Bao’an District, Shenzhen, China Prepared By : Shenzhen Tongzhou Testing Co.,Ltd 1th Floor, Building 1, Haomai High-tech Park, Huating Road 387, Dalang Street, Longhua, Shenzhen, China Date of Test: 2024/6/5 ~ 2024/6/13 Date of Report: 2024/6/14 Report Number: TZ240605811-E1 The test report apply only to the specific sample(s) tested under stated test conditions It is not permitted to copy extracts of these test result without the written permission of the test laboratory. Report No.: TZ240605811-E1 Page 2 of 20 TEST RESULT CERTIFICATION Applicant’s name ................. : Shenzhen Jiuyang Technology Co., Ltd Address ................................. : Room 401, Building 7, Yahao Xuan, No. 502 Jian’an 1st Road, Wenhui Community, Xin’an Street, Bao’an District, Shenzhen, China Manufacture's Name ............ : Shenzhen Jiuyang Technology Co., Ltd Address ................................. : Room 401, Building 7, Yahao Xuan, No. 502 Jian’an 1st Road, Wenhui Community, Xin’an Street, Bao’an District, Shenzhen, China Product description Trade Mark ............................ : N/A Product name ........................... : Foldable Wireless Charger Alarm Clock Model ..................................... : JY - 01 Standards ............................. : FCC Rules and Regulations Part 15 Subpart C (Section 15.209), ANSI C63.10: 2013 This publication may be reproduced in whole or in part for non-commercial purposes as long as the Shenzhen Tongzhou Testing Co.,Ltd is acknowledged as copyright owner and source of the material. Shenzhen Tongzhou Testing Co.,Ltd takes no responsibility for and will not assume liability for damages resulting from the reader's interpretation of the reproduced material due to its placement and context. Date of Test ............................................ : Date (s) of performance of tests ............. : 2024/6/5 ~ 2024/6/13 Date of Issue ........................................... : 2024/6/14 Test Result ............................................... : Pass Testing Engineer : (Allen Lai) Technical Manager : (Hugo Chen) Authorized Signatory : (Andy Zhang) Report No.: TZ240605811-E1 Page 3 of 20 Table of Contents Page 1 TEST SUMMARY ................................................................................................ 4 1.1 TEST PROCEDURES AND RESULTS ....................................... 4 1.2 TEST FACILITY ........................................................................... 4 1.3 MEASUREMENT UNCERTAINTY ............................................... 4 2 GENERAL INFORMATION ................................................................................. 5 2.1 General Description of EUT ......................................................... 5 2.2 Operation of EUT during testing .................................................. 6 2.3 Description of Test Setup ............................................................. 6 2.4 Description of Test Facility ........................................................... 6 3 Measurement Instruments List ............................................................................ 8 4 CONDUCTED EMISSION TEST ......................................................................... 9 4.1 Block Diagram of Test Setup ....................................................... 9 4.2 Conducted Power Line Emission Limit ......................................... 9 4.3 Test Procedure ............................................................................ 9 4.4 Test Result ................................................................................... 9 5 Bandwidth ......................................................................................................... 12 5.1 Block Diagram of Test Setup ..................................................... 12 5.2 Rules and specifications ............................................................ 12 5.3 Test Procedure .......................................................................... 12 5.4 Test Result ................................................................................. 13 6 RADIATED EMISSIONS ................................................................................... 14 6.1 Block Diagram of Test Setup ..................................................... 14 6.2 Rules and specifications ............................................................ 15 6.3 Test Procedure .......................................................................... 16 6.4 Test Result ................................................................................. 16 7 ANTENNA REQUIREMENT .............................................................................. 19 7. TEST SETUP Photographs of EUT .................................................................. 20 8. Exterior Photographs of the EUT ..................................................................... 20 9. INTERIOR Photographs of the EUT ................................................................. 20 Report No.: TZ240605811-E1 Page 4 of 20 1 TEST SUMMARY 1.1 TEST PROCEDURES AND RESULTS DESCRIPTION OF TEST RESULT CONDUCTED EMISSIONS TEST COMPLIANT RADIATED EMISSION TEST COMPLIANT OCCUPIED BANDWIDTH MEASUREMENT COMPLIANT ANTENNA REQUIREMENT COMPLIANT 1.2 TEST FACILITY Test Firm : Shenzhen Tongzhou Testing Co.,Ltd Address 1th Floor, Building 1, Haomai High-tech Park, Huating Road 387, Dalang Street, Longhua, Shenzhen, China 1.3 MEASUREMENT UNCERTAINTY Measurement Uncertainty Conducted Emission Expanded Uncertainty = 2.23dB, k=2 Radiated emission expanded uncertainty(9kHz-30MHz) = 3.08dB, k=2 Radiated emission expanded uncertainty(30M…

Text truncated - open the document above for the full version.

Shenzhen Tongzhou Testing Co.,Ltd FCC ID: 2BG4HJY-01 This report shall not be reproduced except in full, without the written approval of Shenzhen Tongzhou Testing Co.,Ltd Page 1 of 2 TEST SETUP PHOTOS OF THE EUT Radiated Emission Shenzhen Tongzhou Testing Co.,Ltd FCC ID: 2BG4HJY-01 This report shall not be reproduced except in full, without the written approval of Shenzhen Tongzhou Testing Co.,Ltd Page 2 of 2 Conducted Emission