2BH7FBE550V2BE9300 Tri-Band Wi-Fi 7 Router

154 FCC compliance information statement Product Name: BE9300 Tri-Band Wi-Fi 7 Router Model Number: Archer BE550 Component NameModel I.T.E. Power SupplyNBS30D120250VU Responsible party: TP-Link Systems Inc. Address: 10 Mauchly, Irvine, CA 92618 Website: http://www.tp-link.com/us/ Tel: +1 626 333 0234 Fax: +1 909 527 6804 E-mail: [email protected] This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures: •Reorient or relocate the receiving antenna. •Increase the separation between the equipment and receiver. •Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. •Consult the dealer or an experienced radio/ TV technician for help. This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: 1. This device may not cause harmful interference. 2. This device must accept any interference received, including interference that may cause undesired operation. Any changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment. 155 Note: The manufacturer is not responsible for any radio or TV interference caused by unauthorized modifications to this equipment. Such modifications could void the user’s authority to operate the equipment. FCC RF Radiation Exposure Statement This equipment complies with FCC RF radiation exposure limits set forth for an uncontrolled environment. This device and its antenna must not be co-located or operating in conjunction with any other antenna or transmitter. To comply with FCC RF exposure compliance requirements, this grant is applicable to only Mobile Configurations. The antennas used for this transmitter must be installed to provide a separation distance of at least 43 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter. • FCC regulations restrict the operation of this device to indoor use only. • The operation of this device is prohibited on oil platforms, cars, trains, boats, and aircraft, except that operation of this device is permitted in large aircraft while flying above 10,000 feet in the 5.925-6.425 GHz band. • Operation of transmitters in the 5.925-7.125 GHz band is prohibited for control of or communications with unmanned aircraft systems. We, TP-Link Systems Inc. has determined that the equipment shown as above has been shown to comply with the applicable technical standards, FCC part 15. There is no unauthorized change is made in the equipment and the equipment is properly maintained and operated. Issue Date: 2024-09-22 156 FCC compliance information statement Product Name: I.T.E. Power Supply Model Number: NBS30D120250VU Responsible party: TP-Link Systems Inc. Address: 10 Mauchly, Irvine, CA 92618 Website: http://www.tp-link.com/us/ Tel: +1 626 333 0234 Fax: +1 909 527 6804 E-mail: [email protected] This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures: •Reorient or relocate the receiving antenna. •Increase the separation between the equipment and receiver. •Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. •Consult the dealer or an experienced radio/ TV technician for help. This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: 1. This device may not cause harmful interference. 2. This device must accept any interference received, including interference that may cause undesired operation. Any changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment. W e, TP-Link Systems Inc., has determined that the equipment shown as above has been shown to comply with the applicable technical standards, FCC part 15. There is no unauthorized change is made in the equipment and the equipment is properly maintained and operated. Issue Date: 2024-09-22 157 CE Mark Warning This is a class B product. In a domestic environment, this product may cause radio interference, in which case the user may be required to take adequate measures. OPERATING FREQUENCY(the maximum transmitted power) 2400 MHz -2483.5 MHz (20dBm) 5150 MHz -5250 MHz (23dBm) 5250 MHz -5350 MHz (23dBm) 5470 MHz -5725 MHz (30dBm) 5945MHz -6425 MHz (23dBm) Frequency band: 5150 - 5250 MHz: Indoor use: Inside buildings only. Installations and use inside road vehicles and train carriages are not permitted. Limited outdoor use: If used outdoors, equ…

Text truncated - open the document above for the full version.

LED Explanation You can check the router’s working status by following the LED Explanation. Button Explanation Set Up the Network 1. Connect your device to the router wirelessly or with an Ethernet cable. New Password: Let’s Get Started Confirm Password: http://tplinkwifi.net Method TWO: Via a Web Browser 2. Launch a web browser and enter http://tplinkwifi.net or http://192.168.0.1 in the address bar. Create a password to log in. 3. Follow the step-by-step instructions to set up the internet connection and register for the TP-Link Cloud service. Note: If the login window does not appear, please refer to Q1 of Need Help in this guide. Method ONE: Via the TP-Link Tether App 1. Download the Tether app. To enjoy a more complete service from TP-Link, bind your TP-Link ID to the router. Scan for Tether Tether or 2. Open the Tether app and log in with your TP-Link ID. Note: If you don’t have an account, create one first. The default wireless network names (SSIDs) and password are printed on the label at the back of the router. Wireless Password/PIN :XXXXXXXX SSID:TP-Link_XXXX SSID:TP-Link_XXXX_5G SSID:TP-Link_XXXX_6G 2 Choose Your Device Type Gaming Router Range Extender Wireless Router *Images may differ from your actual products. • Unplug the power to turn off your modem, if any, and remove the backup battery if it has one. • Keep the router vertical while working. Refer to Q4 of Need Help to place the router for optimal Wi-Fi performance. Three physical buttons are located on the front of the router. Press the WPS button, and immediately press the WPS button on your client device to start the WPS process. Press the LED button to turn on or off the LED of your router. Press and hold this button for about 2 seconds to turn on or off the wireless function of your router. LED ButtonWi-Fi ButtonWPS Button Power on the modem, and then wait about 2 minutes for it to restart. 2 Wait until the LED is solid on (LED Exclamation Point or All LEDs) 4 Internet Connect the powered-off modem to the router’s 2.5 Gbps WAN port with an Ethernet cable. 1 Connect the power adapter to the router. Then press the Power button to turn it on. 3 3. Tap the button in the Tether app and select Wireless Router > Archer BE550/BE9300. Follow the steps to complete the setup and connect to the internet. Off Power is off or the LED is turned off. Blinking Wi-Fi is off. Blinking The router is disconnected from the internet, and Wi-Fi is off. Solid The router is disconnected from the internet. Blinking Establishing a WPS connection. Solid The router is working normally. Cycling The system is starting up or the router is being upgraded. Do not disconnect or power off your router. All LEDs Top 10 LEDs LED Exclamation Point LED Exclamation Point All LEDs Or Note: Due to Tether app updates, your actual user interface and pathway may differ from those depicted here. Modem Unplug the power 1 Connect the Hardware Q1. What should I do if I can’t access the web management page? • Reboot your router and try again. • If the computer is set to a static IP, change its settings to obtain an IP address automatically. • Verify that http://tplinkwifi.net is correctly entered in the web browser. Alternatively, enter http://192.168.0.1 or http://192.168.1.1 in the web browser. • Use another web browser and try again. • Disable and enable the network adapter in use. Q2. What should I do if I can’t access the internet? • Power off your modem for about 5 minutes, then power it on and check the internet. If your modem has more than one Ethernet port, keep the other ports unconnected. • Check if the internet is working normally by connecting a computer directly to the modem via an Ethernet cable. If it is not, contact your internet service provider. • Log in to the web management page, and go to the Network Map page to check whether the internet IP address is valid or not. If it’s valid, go to Advanced > Network > Internet, click Advanced Settings, select Use the Following DNS Addresses, set the primary DNS to 8.8.8.8, and set the secondary DNS to 8.8.4.4. If it is not, check the hardware connection or contact your internet service provider. • For cable modem users, log in to the web management page of the router and go to Advanced > Network > Internet > MAC Clone. Select Clone Current Device MAC and click SAVE. Then reboot both the modem and the router. Q3. What should I do if I forget my wireless password? • If you have not changed the default wireless password, it can be found on the label at the bottom of the router. • Connect a computer directly to the router using an Ethernet cable. Log in to USB Applications With the USB port, it’s easy to share files and media with multiple devices. Visit https://www.tp-link.com/app/usb to learn more about the USB applications. Local Storage Sharing: Share files from the USB drive with devices on your home network Media Server: Play media from the USB drive on your computer Remote Access: Access the USB drive when you are away from home EasyMesh-Compatible You can experience strong, stable, and seamless wireless connections throughout your home with EasyMesh. ©2024 TP-Link 7106511391 REV2.0.0 Need Help? BE9300 Tri-Band Wi-Fi 7 Router Quick Installation Guide For technical support, replacement services, user guides, and other information, please visit https://www.tp-link.com/support. TP-Link HomeShield premium security services keep your home network safe with cutting-edge features. Tap the HomeShield tab to enjoy. For more details, visit https://www.tp-link.com/homeshield. Comprehensive Reports Gain full statistics and insights to help you know your home network better. Parental Controls Manage online time and block inappropriate content to maintain healthy online habits. Quality of Service (QoS) Prioritize your bandwidth needs for a better networking experience. Network Protection Detects cyber threats to keep your privacy and connected devices well protected. Tether TP-Link HomeShield the router’s web manage…

Text truncated - open the document above for the full version.

TP-LinkSystemsInc. 10Mauchly,Irvine,CA92618 012423-17rev2 CertificationApplicationAttestationStatements Date:September25,2024 AmericanCertificationBody,Inc. 313ParkAvenue Suite300 FallsChurch,VA22046 ToWhomItMayConcern: Statementfor47CFRsection2.911(d)(5)(i) _____TP-LinkSystemsInc.______certifiesthatasofthedateoftheapplicationtheequipmentfor whichauthorizationissoughtisnot“covered”equipment 1 prohibitedfromreceivinganequipment authorizationpursuanttosection2.903oftheFCCrules. Iftheequipmentforwhichtheapplicantseeksauthorizationisproducedbyanyoftheentities identifiedonthecurrentCoveredList,includingaffiliatesorsubsidiariesofthenamedcompanies,the applicantmustincludeanexplanationonwhytheequipmentisnot“covered”equipment. AdditionalExplanation:<N/A> Statementfor47CFRsection2.911(d)(5)(ii) ___TP-LinkSystemsInc.____(“theapplicant”)certifiesthat,asofthedateofthefilingofthis application,theapplicant☐-is/  -isnot identifiedontheCoveredListasanentityproducing“covered”equipment. Thankyou, By:____SarahWang__ (Signature 2 )(Printname) Title:Compliancemanager Company:TP-LinkSystemsInc._____Telephone:+8675521534921 1 -TheCommission’sCoveredListispublishedbythePublicSafetyandHomelandSecurityBureauandpostedontheCommission’swebsite.This CoveredList,whichisperiodicallyupdated,identifiesparticularequipment,producedbyparticularentities,thatconstitutes“covered”equipment. https://www.fcc.gov/supplychain/coveredlist. 2 -Lettersshouldbeplacedonappropriateletterhead.

AttestationLetter FederalCommunicationsCommission AuthorizationandEvaluationDivision We Name:TP-LinkSystemsInc. Address:10Mauchly,Irvine,CA92618 Declarethatthedevicedoesnotsupportchannel12~13in2.4GHzbandandanynon-US channelsinalltheoperationalmode(s)forthefollowingproduct. Product:BE9300Tri-BandWi-Fi7Router FCCID:2BH7FBE550V2 Model:ArcherBE550,ArcherBE9300 Brand:tp-link Sincerely, Name:SarahWang Position:RegulatoryComplianceManager Date:2024-09-21

ConfidentialityRequestLetter FederalCommunicationsCommission AuthorizationandEvaluationDivision FCCID:2BH7FBE550V2 ConfidentialityRequest PursuanttoSections0.457and0.459oftheCommission’sRules,weherebyrequest confidentialtreatmentofinformationaccompanyingthisapplicationasoutlinedbelow: 1.BlockDiagram 2.Schematics 3.OperationalDescription Theabovematerialscontaintradesecretsandproprietaryinformationnotcustomarily releasedtothepublic.Thepublicdisclosureofthesemattersmightbeharmfultothe applicantandprovideunjustifiedbenefitstoitscompetitors. TheapplicantunderstandsthatpursuanttoRule0.457,disclosureofthisapplicationandall accompanyingdocumentationwillnotbemadebeforethedateoftheGrantforthis application. Sincerely, Name:SarahWang Position:RegulatoryComplianceManager Date:2024-09-21

DeclarationofAuthorization We Name:TP-LinkSystemsInc. Address:10Mauchly,Irvine,CA92618 Declarethat: NameRepresentativeofagent:MarlinChen AgentCompanyname:MRTTechnology(Suzhou)Co.,Ltd Address:D8Building,YouxinIndustrialPark,No.2Tian'edangRd., WuzhongEconomicDevelopmentZone City:Suzhou Country:China isauthorizedtoapplyforCertificationofthefollowingproduct(s): Product:BE9300Tri-BandWi-Fi7Router FCCID:2BH7FBE550V2 Model:ArcherBE550,ArcherBE9300 Brand:tp-link Sincerely, _________________ Name:SarahWang Position:RegulatoryComplianceManager Date:2024-09-21

DeclarationofConformity We Name:TP-LinkSystemsInc. Address:10Mauchly,Irvine,CA92618 Declarethat: Product:BE9300Tri-BandWi-Fi7Router FCCID:2BH7FBE550V2 Model:ArcherBE550,ArcherBE9300 Brand:tp-link ProductwhichbearstheaboveFCCIDisalsocompliantwiththeFCCrequirementsforsDOC. AndthesDOCprocedureshallbecarriedoutpriortomarketingthedeviceintheUS. Sincerely, _________________ Name:SarahWang Position:RegulatoryComplianceManager Date:2024-09-21

Declaration letter For our business issue and marketing requirement, we would like to list different model number as following: Model No.: Archer BE550, Archer BE9300 Model Difference: The difference of models only for marketing different, the other hardware was the same. Name: Sarah Wang Position: Regulatory Compliance Manager Date: 2024-09-23

Report No.: 2407TW0103-UE 1 of 7 External Photograph (1) EUT Photo (2) EUT Photo Report No.: 2407TW0103-UE 2 of 7 (3) EUT Photo (4) EUT Photo Report No.: 2407TW0103-UE 3 of 7 (5) EUT Photo (6) EUT Photo Report No.: 2407TW0103-UE 4 of 7 (7) EUT Photo (8) EUT Photo Report No.: 2407TW0103-UE 5 of 7 (9) EUT Photo (10) EUT Photo Report No.: 2407TW0103-UE 6 of 7 (11) EUT Photo (12) EUT Photo Report No.: 2407TW0103-UE 7 of 7 (13) EUT Photo (14) EUT Photo

Model: Archer BE550 BE9300 Tri-Band Wi-Fi 7 Router Power: 12V 2.5A Default Access: http://tplinkwifi.net JOIN PRESET WI-FI Model:Archer BE550(US) Ver:2.0 S/N:XXXXXXXXXXXXX MAC: XX-XX-XX-XX-XX-XX Wireless Password/PIN :XXXXXXXX SSID:TP-Link_XXXX SSID:TP-Link_XXXX_5G SSID:TP-Link_XXXX_6G MADE IN CHINA FCC ID: 2BH7FBE550V2 IC: 32876-BE550V2 HVIN: Archer BE550V2 RoHS TP-Link Systems Inc. 10 Mauchly, Irvine, CA 92618 28.2 mm 5.7 mm Indoor use only

Report No.: 2407TW0103-UI 1 of 20 Internal Photograph (1) EUT Photo (2) EUT Photo Report No.: 2407TW0103-UI 2 of 20 (3) EUT Photo (4) EUT Photo Report No.: 2407TW0103-UI 3 of 20 (5) EUT Photo (6) EUT Photo Report No.: 2407TW0103-UI 4 of 20 (7) EUT Photo (8) EUT Photo Report No.: 2407TW0103-UI 5 of 20 (9) EUT Photo (10) EUT Photo Report No.: 2407TW0103-UI 6 of 20 (11) EUT Photo (12) EUT Photo Report No.: 2407TW0103-UI 7 of 20 (13) EUT Photo (14) EUT Photo Report No.: 2407TW0103-UI 8 of 20 (15) EUT Photo (16) EUT Photo Report No.: 2407TW0103-UI 9 of 20 (17) EUT Photo (18) EUT Photo Report No.: 2407TW0103-UI 10 of 20 (19) EUT Photo (20) EUT Photo Report No.: 2407TW0103-UI 11 of 20 (21) EUT Photo (22) EUT Photo Report No.: 2407TW0103-UI 12 of 20 (23) EUT Photo (24) EUT Photo Report No.: 2407TW0103-UI 13 of 20 (25) EUT Photo (26) EUT Photo Report No.: 2407TW0103-UI 14 of 20 (27) EUT Photo (28) EUT Photo Report No.: 2407TW0103-UI 15 of 20 (29) EUT Photo (30) EUT Photo Report No.: 2407TW0103-UI 16 of 20 (31) EUT Photo (32) EUT Photo Report No.: 2407TW0103-UI 17 of 20 (33) EUT Photo (34) EUT Photo Report No.: 2407TW0103-UI 18 of 20 (35) EUT Photo (36) EUT Photo Report No.: 2407TW0103-UI 19 of 20 (37) EUT Photo (38) EUT Photo Report No.: 2407TW0103-UI 20 of 20 (39) EUT Photo

MRT Technology (Taiwan) Co., Ltd Report No.: 2407TW0103-U6 Phone: +886-3-3288388 Report Version 1.0 Web: www.mrt-cert.com Issue Date: 2024-09-23 Page Number: 1 of 12 RF Exposure Evaluation Declaration FCC ID : 2BH7FBE550V2 Applicant : TP-Link Systems Inc. Application Type : Certification Product : BE9300 Tri-Band Wi-Fi 7 Router Model No. : Archer BE550, Archer BE9300 Brand Name : tp-link FCC Classification : Digital Transmission System (DTS) Unlicensed National Information Infrastructure (NII) 15E 6GHz Low Power Indoor Access Point (6ID) 15E 6GHz Subordinate Indoor Device (6PP) Received Date : September 14, 2024 Test By : ( Owen Tsai ) Reviewed By : ( Paddy Chen ) Approved By : ( Chenz Ker) The test results relate only to the samples tested. The test results shown in the test report are traceable to the national/international standards through the calibration of the equipment and evaluated measurement uncertainty herein. The test report shall not be reproduced except in full without the written approval of MRT Technology (Taiwan) Co., Ltd. Report No.: 2407TW0103-U6 Page Number: 2 of 12 Revision History Report No. Version Description Issue Date Note 2407TW0103-U6 1.0 Original Report 2024-09-23 Valid Report No.: 2407TW0103-U6 Page Number: 3 of 12 CONTENTS Description Page 1. INTRODUCTION ................................................................................................................... 5 1.1. Scope ........................................................................................................................ 5 1.2. MRT Test Location .................................................................................................... 5 2. PRODUCT INFORMATION ................................................................................................... 6 2.1. Feature of Equipment under Test .............................................................................. 6 2.2. Description of Available Antennas .............................................................................. 6 2.3. Device Classification .................................................................................................. 7 2.4. Applied Standards ..................................................................................................... 7 3. RF Exposure Evaluation ..................................................................................................... 8 3.1. Limits ......................................................................................................................... 8 3.2. MPE Exemptions ....................................................................................................... 9 3.3. Test Result of RF Exposure Evaluation .....................................................................12 Report No.: 2407TW0103-U6 Page Number: 4 of 12 General Information Applicant TP-Link Systems Inc. Applicant Address 10 Mauchly, Irvine, CA 92618 Manufacturer TP-Link Systems Inc. Manufacturer Address 10 Mauchly, Irvine, CA 92618 Test Site MRT Technology (Taiwan) Co., Ltd Test Site Address No. 38, Fuxing Second Rd., Guishan Dist., Taoyuan City 333, Taiwan (R.O.C) MRT FCC Registration No. 291082 Test Facility / Accreditations 1. MRT facility is a FCC registered (Reg. No. 291082) test facility with the site description report on file and is designated by the FCC as an Accredited Test Firm. 2. MRT facility is an IC registered (MRT Reg. No. 21723) test laboratory with the site description on file at Industry Canada. 3. MRT Lab is accredited to ISO 17025 by the Taiwan Accreditation Foundation (TAF Cert. No. 3261) in EMC, Telecommunications and Radio testing for FCC (Designation Number: TW3261), Industry Canada, EU and TELEC Rules. Report No.: 2407TW0103-U6 Page Number: 5 of 12 1. INTRODUCTION 1.1. Scope Measurement and determination of electromagnetic emissions (EMC) of radio frequency devices including intentional and/or unintentional radiators for compliance with the technical rules and regulations of the Federal Communications Commission and the Innovation, Science and Economic Development Canada and Certification and Engineering Bureau. 1.2. MRT Test Location The map below shows the location of the MRT LABORATORY, its proximity to the Taoyuan City. These measurement tests were conducted at the MRT Technology (Taiwan) Co., Ltd. Facility located at No.38, Fuxing 2nd Rd., Guishan Dist., Taoyuan City 33377, Taiwan (R.O.C). Report No.: 2407TW0103-U6 Page Number: 6 of 12 2. PRODUCT INFORMATION 2.1. Feature of Equipment under Test Model Difference: The difference of models only for marketing different, the other hardware was the same. (Declared by the manufacturer). 2.2. Description of Available Antennas Antenna Type Frequency Band (MHz) T X Paths Number of spatial streams Antenna Gain (dBi) Beamforming Directional Gain (dBi) CDD Directional Gain (dBi) Ant 0 Ant 1 For Power For PSD Dipole 2412 ~ 2462 2 1 2.00 2.00 5.01 2.00 5.01 5150 ~ 5250 2 1 2.44 2.69 5.70 2.69 5.70 5250 ~ 5350 2 1 3.00 2.71 6.01 3.00 6.01 5470 ~ 5725 2 1 2.91 2.62 5.92 2.91 5.92 5725 ~ 5850 2 1 2.84 2.84 5.85 2.84 5.85 5945 ~ 6425 2 1 3.00 1.96 6.01 3.00 6.01 5945 ~ 6425 2 2 3.00 1.96 -- 3.00 3.00 6425 ~ 6525 2 1 2.83 2.42 5.84 2.83 5.84 6425 ~ 6525 2 2 2.83 2.42 -- 2.83 2.83 6525 ~ 6885 2 1 2.62 3.00 6.01 3.00 6.01 6525 ~ 6885 2 2 2.62 3.00 -- 3.00 3.00 6885 ~ 7125 2 1 2.85 2.87 5.88 2.87 5.88 6885 ~ 7125 2 2 2.85 2.87 -- 2.87 2.87 Remark: Product Name: BE9300 Tri-Band Wi-Fi 7 Router Model No.: Archer BE550, Archer BE9300 Brand Name: tp-link Specification 802.11a/b/g/n/ac/ax/be Accessory Power Adapter Brand: MASS POWER Model No: NBS30D120250VU Input: 100 - 240V ~ 50/60Hz 0.8A Output: DC 12.0V 2.5A DC Cable Out: Non-Shielded, 1.5m Report No.: 2407TW0103-U6 Page Number: 7 of 12 1. The EUT supports Cyclic Delay Diversity (CDD) mode, and CDD signals are correlated. If all antennas have the same gain, G ANT , Directional gain = G ANT + Array Gain, where Array Gain is as foll…

Text truncated - open the document above for the full version.

MRT Technology (Taiwan) Co., Ltd Report No.: 2407TW0103-U2 Phone: +886-3-3288388 Report Version: 1.0 Web: www.mrt-cert.com Issue Date: 2024-09-23 Page Number: 1 of 220 FCC ID : 2BH7FBE550V2 Applicant : TP-Link Systems Inc. Application Type : Certification Product : BE9300 Tri-Band Wi-Fi 7 Router Model No. : Archer BE550, Archer BE9300 Brand Name : tp-link FCC Classification : Digital Transmission System (DTS) FCC Rule Part(s) : Part15 Subpart C (Section 15.247) Received Date : July 3, 2024 Test Date : July 31, 2024~August 30, 2024 MEASUREMENT REPORT The test results relate only to the samples tested. This equipment has been shown to be capable of compliance with the applicable technical standards as indicated in the measurement report and was tested in accordance with the measurement procedures specified in ANSI C63.10-2013. Test results reported herein relate only to the item(s) tested. The test report shall not be reproduced except in full without the written approval of MRT Technology (Taiwan) Co., Ltd. Test By : ( Owen Tsai ) Reviewed By : ( Paddy Chen ) Approved By : ( Chenz Ker) Report No.: 2407TW0103-U2 Page Number: 2 of 220 Revision History Report No. Version Description Issue Date Note 2407TW0103-U2 1.0 Original Report 2024-09-23 Valid Report No.: 2407TW0103-U2 Page Number: 3 of 220 CONTENTS Description Page 1. INTRODUCTION ...................................................................................................................... 6 1.1. Scope ............................................................................................................................ 6 1.2. MRT Test Location ......................................................................................................... 6 2. PRODUCT INFORMATION ...................................................................................................... 7 2.1. Feature of Equipment under Test ................................................................................... 7 2.2. Product Specification Subjective to this Report .............................................................. 7 2.3. Working Frequencies for this report ............................................................................... 8 2.4. Description of Available Antennas .................................................................................. 8 2.5. Test Mode ...................................................................................................................... 9 2.6. Configuration of Test System ....................................................................................... 10 2.7. Test System Details ..................................................................................................... 10 2.8. Description of Test Software ........................................................................................ 10 2.9. Applied Standards ......................................................................................................... 11 2.10. Duty Cycle ................................................................................................................. 11 2.11. Test Configuration .................................................................................................... 13 2.12. EMI Suppression Device(s)/Modifications ................................................................. 13 2.13. Labeling Requirements ............................................................................................. 13 3. DESCRIPTION of TEST ......................................................................................................... 14 3.1. Evaluation Procedure ................................................................................................... 14 3.2. AC Line Conducted Emissions ..................................................................................... 14 3.3. Radiated Emissions ..................................................................................................... 15 4. ANTENNA REQUIREMENTS................................................................................................. 16 5. TEST EQUIPMENT CALIBRATION DATE ............................................................................. 17 6. MEASUREMENT UNCERTAINTY ......................................................................................... 19 7. TEST RESULT ....................................................................................................................... 20 7.1. Summary ..................................................................................................................... 20 7.2. 6dB Bandwidth Measurement ...................................................................................... 21 7.2.1. Test Limit .................................................................................................................. 21 7.2.2. Test Procedure used ................................................................................................. 21 7.2.3. Test Setting .............................................................................................................. 21 7.2.4. Test Setup ................................................................................................................ 21 7.2.5. Test Result ............................................................................................................... 22 7.3. Output Power Measurement ........................................................................................ 27 Report No.: 2407TW0103-U2 Page Number: 4 of 220 7.3.1. Test Limit .................................................................................................................. 27 7.3.2. Test Procedure Us…

Text truncated - open the document above for the full version.