2BHFB-4071-00Mate Series Thermal Imaging Attachment

NOCPIX  MATE  User Manual www.nocpix.com All rights reserved and shall not be copied and distributed in any form without written permission. - 1 - IMPORTANT SAFETY INFORMATION Environmental influences - Never point the lens of the device directly at intense heat sources such as the sun or laser equipment. The objective lens and eyepiece can function as a burning gla - Avoid touching the metal surface (cooling fins) after exposure to sunlight or cold. Ergonomics notes Take breaks after longer periods of use to avoid wrist pain. Risk of swallowing Do not place this device in the hands of small children. Incorrect handling can cause small parts to come loose which may be swallowed. Safety instructions for use - Handle the device with care: rough handling can damage the internal battery. - Do not expose the device to fire or high temperatures. - Install the batteries correctly according to the instruction on the device. Reverse connection is prohibited. - The battery capacity decreases when operated in a cold ambient temperature. This is not a fault and occurs for technical reasons. - The recommended temperature for using this product is -20° to +50°. Otherwise, it will affect the service life of the product. - Do not store the device for long periods at temperatures below -20°C or above 50°C, or it will permanently reduce the battery capacity. - Always store the device in a dry, well-ventilated space. - If the device has been damaged or the battery is defective, send the device to our after-sales service for repair. Safety instructions for the power supply unit - Check the power supply unit, cable and adapter for visible damage before use. - Do not use any defective parts. Defective components must be replaced. - Do not use the power supply unit in wet or humid environments. NOCPIX  MATE  User Manual www.nocpix.com All rights reserved and shall not be copied and distributed in any form without written permission. - 2 - - Only charge the device at temperatures ranging between 0°C and 50°C. - Do not make any technical modifications. Disposal of batteries Directive 2006/66/EC (battery directive): This product contains a battery that cannot be disposed of as unsorted municipal waste in the European Union. For battery details, refer to the documentation of the specific product. The battery is marked with this symbol, which may include Cd (indicating cadmium), Pb (indicating lead), or Hg (indicating mercury). For proper recycling, please return the battery to your supplier or send it to a designated collection point. For more information, visit www.recyclethis.info. User information on the disposal of electrical and electronic devices (private households) 2012/19/EU (WEEE directive): Products marked with this symbol cannot be disposed of as unsorted municipal waste in the European Union. For proper recycling, return this product to your local supplier upon the purchase of equivalent new equipment, or dispose of it at designated collection points. For more information see: www.recyclethis.info. For business customers within the European Union Please contact your dealer or supplier regarding the disposal of electrical and electronic devices. He will provide you with further information. Information on disposal in other countries outside of the European Union This symbol is only applicable in the European Union. Please contact your local authority or dealer if you wish to dispose of this product and ask for a disposal option. Intended use The device is intended for displaying heat signatures during nature NOCPIX  MATE  User Manual www.nocpix.com All rights reserved and shall not be copied and distributed in any form without written permission. - 3 - observation, remote hunting observations and for civil use. This device is not a toy for children. Use the device only as described in this operating manual. The manufacturer and the dealer accept no liability for damages which arise due to non-intended or incorrect use. Function test - Before use, please ensure that your device has no visible damage. - Test to see if the device displays a clear, undisturbed image. - Check that the settings for the thermal imaging monocular are correct. See the notes in the section Power On and Image Settings. Installing/Removing the battery The MATE Thermal Imaging Attachment is equipped with two power supply systems - one built-in battery pack and one replaceable 18650 battery. The built-in battery pack cannot be removed. NOCPIX  MATE  User Manual www.nocpix.com All rights reserved and shall not be copied and distributed in any form without written permission. - 4 - 1 Specifications Model MATE LITE L38 MATE H38R MATE H50R MATE ULTRA S60R Detector Specifications Type Vox Vox Vox Vox Resolution, Pixels 384×288 640x512 640×512 1280×1024 Pixel Size, um 12μm 12μm 12μm 12μm NETD, mK ≤ 15 ≤ 15 ≤ 15 ≤ 15 Frame Rate, Hz 60 60 60 60 Optical Specifications Objective Lens, mm 38/F1.0 38/F1.0 50/F1.0 60/F1.0 Field of View (H×V), º 6.9×5.2 11.6×8.7 8.6×6.6 14.7×11.7 Linear Field of View (H×V), m @ 100m 12.3x9.2 20.5x15.4 15x11.5 25.6x20.5 Eye Relief, mm 20 20 20 20 Exit Pupil Diameter, mm 35 35 35 35 Detection Range, m(Target Size: 1.7m×0.5m, P(n)=99%) 1950 1950 2600 3100 Display Specifications Type AMOLED AMOLED AMOLED AMOLED Resolution 1920x1080 1920×1080 1920×1080 1920×1200 Battery Power Supply NOCPIX  MATE  User Manual www.nocpix.com All rights reserved and shall not be copied and distributed in any form without written permission. - 5 - Battery Replaceable 18650 battery Replaceable 18650 battery Replaceable 18650 battery Replaceable 18650 battery Max. Operating Time (22ºC), h* 6 4 4 4 External Power Supply 5V (Type C) 5V (Type C) 5V (Type C) 5V (Type C) Physical Specifications Wi-Fi / APP Support Support Support Support Photo / Video Recorder Support Support Support Support RAV Support Support Support Support Gallery Support Support Support Support N-link Support Support Support Support Remote Support Support Support …

Text truncated - open the document above for the full version.

` ReportNo.:SUCR260300029001 Page:1of3 AppendixA DetailedSystemCheckResults 1.SystemPerformanceCheck SystemPerformanceCheck2450MHz Date: 2026/5/12 Test Laboratory: SGS-SAR Lab System Performance Check 2450MHz DUT: D2450V2; Type: Dipole; Serial: 922 Communication System: UID 0, CW; Frequency: 2450 MHz;Duty Cycle: 1:1 Medium: HSL2450;Medium parameters used: f = 2450 MHz; σ = 1.856 S/m; ε = 38.426; ρ = 1000 r 3 kg/m Phantom section: Flat Section DASY 5 Configuration: lProbe: EX3DV4 -SN3982; ConvF(7.18, 7.67, 7.44); Calibrated: 2025/11/7 lSensor-Surface: 1.4mm (Mechanical Surface Detection) lElectronics: DAE4 Sn1374; Calibrated: 2026/2/2 lPhantom: SAM 7; Type: SAM; Serial: 1702 lDASY52 52.10.4(1527); SEMCAD X 14.6.14(7483) Body/d=10mm, Pin=250mW/Area Scan (10x10x1): Measurement grid: dx=12mm, dy=12mm Maximum value of SAR (measured) = 17.4 W/kg Body/d=10mm, Pin=250mW/Zoom Scan (7x7x7)/Cube 0: Measurement grid: dx=5mm, dy=5mm, dz=5mm Reference Value = 90.62 V/m; Power Drift = -0.01 dB Peak SAR (extrapolated) = 27.9 W/kg SAR(1 g) = 13.5 W/kg; SAR(10 g) = 6.25 W/kg Smallest distance from peaks to all points 3 dB below = 9 mm Ratio of SAR at M2 to SAR at M1 = 48.8% Maximum value of SAR (measured) = 22.7 W/kg 0 dB = 17.4 W/kg = 12.39 dBW/kg ` ReportNo.:SUCR260300029001 Page:3of3 -EndoftheAppendix-

Compliance Certification Services (Kunshan) Inc. Page: 1 of 3 Appendix Photographs of Test Setup for KSCR2603000681AT Test Model No.: MATE ULTRA S60R Compliance Certification Services (Kunshan) Inc. Page: 2 of 3 Test Setup Photo Conducted Emissions at Mains Terminals (150kHz-30MHz) RF Conducted setup Compliance Certification Services (Kunshan) Inc. Page: 3 of 3 RF Radiated setup (Below 1GHz) RF Radiated setup (Above 1GHz) - End of the Appendix -

Report No.: KSCR260300068102 Page: 1 of 62 TRF No. CONN_001 A_Jun 1st ,2026 TEST REPORT Application No.: KSCR2603000681AT FCC ID: 2BHFB-4071-00 Applicant: Inlumen Technologies Co., Ltd. Address of Applicant: Room 806, A1, Phase 3, Innovation Industrial Park,High-tech Zone, Hefei City, Anhui Province, China. Manufacturer: Inlumen Technologies Co., Ltd. Address of Manufacturer: Room 806, A1, Phase 3, Innovation Industrial Park,High-tech Zone, Hefei City, Anhui Province, China. Factory: ImTorch Innovation Technology Co., Ltd. Address of Factory: Room 301, 3rd Floor, Building A, No. 1777, Jimingshan Road, Chengxiqiao Community Service Center, High-tech Zone, Hefei City, Anhui Province, China. Equipment Under Test (EUT): EUT Name: Mate Series Thermal Imaging Attachment Model No.: MATE ULTRA S60R Trade Mark: Nocpix Standard(s) : 47 CFR Part 15, Subpart C 15.247 Date of Receipt: 2026-03-30 Date of Test: 2026-04-28 to 2026-04-30 Date of Issue: 2026-06-03 Test Result: Pass* * In the configuration tested, the EUT complied with the standards specified above. Report No.: KSCR260300068102 Page: 2 of 62 TRF No. CONN_001 A_Jun 1st ,2026 Revision Record Version Description Date Remark 00 Original 2026-06-03 / Authorized for issue by: Prepared By Eric_Liu/Project Engineer Approved By Terry Hou /Reviewer Report No.: KSCR260300068102 Page: 3 of 62 TRF No. CONN_001 A_Jun 1st ,2026 2 Test Summary Radio Spectrum Technical Requirement Item Standard Method Requirement Result Antenna Requirement 47 CFR Part 15, Subpart C 15.247 N/A 47 CFR Part 15, Subpart C 15.203 & 15.247(b)(4) Pass Radio Spectrum Matter Part Item Standard Method Requirement Result Conducted Emissions at AC Power Line (150kHz-30MHz) 47 CFR Part 15, Subpart C 15.247 ANSI C63.10 (2020) Section 6.2 47 CFR Part 15, Subpart C 15.207 Pass Radiated Emissions which fall in the restricted bands ANSI C63.10 (2020) Section 6.10.5 & 11.12 47 CFR Part 15, Subpart C 15.205 & 15.209 Pass Radiated Spurious Emissions Below 1GHz ANSI C63.10 (2020) Section 6.4,6.5 47 CFR Part 15, Subpart C 15.205 & 15.209 Pass Radiated Spurious Emissions Above 1GHz ANSI C63.10 (2020) Section 6.6 & 11.12 47 CFR Part 15, Subpart C 15.205 & 15.209 Pass Maximum Conducted Output Power ANSI C63.10 (2020) Section 11.9.1 47 CFR Part 15, Subpart C 15.247(b)(3) Pass Minimum 6dB Bandwidth ANSI C63.10 (2020) Section 11.8.1 47 CFR Part 15, Subpart C 15.247a(2) Pass Power Spectral Density ANSI C63.10 (2020) Section 11.10.3 47 CFR Part 15, Subpart C 15.247(e) Pass Conducted Band Edges Measurement ANSI C63.10 (2020) Section 6.10.4 47 CFR Part 15, Subpart C 15.247(d) Pass Conducted Spurious Emissions ANSI C63.10 (2020) Section 11.11 47 CFR Part 15, Subpart C 15.247(d) Pass Report No.: KSCR260300068102 Page: 4 of 62 TRF No. CONN_001 A_Jun 1st ,2026 3 Contents Page 1 COVER PAGE ........................................................................................................................................... 1 2 Test Summary ......................................................................................................................................... 3 3 Contents ................................................................................................................................................... 4 4 General Information ................................................................................................................................ 5 4.1 Details of E.U.T. ............................................................................................................................... 5 4.2 Power level setting using in test ....................................................................................................... 5 4.3 Description of Support Units ............................................................................................................ 5 4.4 Measurement Uncertainty ................................................................................................................ 6 4.5 Test Location .................................................................................................................................... 7 4.6 Test Facility ...................................................................................................................................... 7 4.7 Deviation from Standards ................................................................................................................. 7 4.8 Abnormalities from Standard Conditions .......................................................................................... 7 5 Equipment List ........................................................................................................................................ 8 6 Radio Spectrum Technical Requirement .............................................................................................. 9 6.1 Antenna Requirement ...................................................................................................................... 9 7 Radio Spectrum Matter Test Results .................................................................................................. 10 7.1 Conducted Emissions at AC Power Line (150kHz-30MHz) ........................................................... 10 7.2 Radiated Emissions which fall in the restricted bands ................................................................... 14 7.3 Radiated Spurious Emissions Below 1GHz ................................................................................... 25 7.4 Radiated Spurious Emissions Above 1GHz ................................................................................... 29 7.5 Maximum Conducted Output Power .............................................................................................. 37 7.6 Minimum 6dB Bandwidth................................................................................................................ 38 7.7 Power Spectral Density ..............…

Text truncated - open the document above for the full version.

Report No.: KSCR260300068101 Page: 1 of 101 TRF No. CONN_001 A_Jun 1st ,2026 TEST REPORT Application No.: KSCR2603000681AT FCC ID: 2BHFB-4071-00 Applicant: Inlumen Technologies Co., Ltd. Address of Applicant: Room 806, A1, Phase 3, Innovation Industrial Park,High-tech Zone, Hefei City, Anhui Province, China. Manufacturer: Inlumen Technologies Co., Ltd. Address of Manufacturer: Room 806, A1, Phase 3, Innovation Industrial Park,High-tech Zone, Hefei City, Anhui Province, China. Factory: ImTorch Innovation Technology Co., Ltd. Address of Factory: Room 301, 3rd Floor, Building A, No. 1777, Jimingshan Road, Chengxiqiao Community Service Center, High-tech Zone, Hefei City, Anhui Province, China. Equipment Under Test (EUT): EUT Name: Mate Series Thermal Imaging Attachment Model No.: MATE ULTRA S60R Trade Mark: Nocpix Standard(s) : 47 CFR Part 15, Subpart C 15.247 Date of Receipt: 2026-03-30 Date of Test: 2026-04-28 to 2026-04-30 Date of Issue: 2026-06-03 Test Result: Pass* * In the configuration tested, the EUT complied with the standards specified above. Report No.: KSCR260300068101 Page: 2 of 101 TRF No. CONN_001 A_Jun 1st ,2026 Revision Record Version Description Date Remark 00 Original 2026-06-03 / Authorized for issue by: Prepared By Eric_Liu/Project Engineer Approved By Terry Hou /Reviewer Report No.: KSCR260300068101 Page: 3 of 101 TRF No. CONN_001 A_Jun 1st ,2026 2 Test Summary Radio Spectrum Technical Requirement Item Standard Method Requirement Result Antenna Requirement 47 CFR Part 15, Subpart C 15.247 N/A 47 CFR Part 15, Subpart C 15.203 & 15.247(b)(4) Pass Radio Spectrum Matter Part Item Standard Method Requirement Result Conducted Emissions at AC Power Line (150kHz-30MHz) 47 CFR Part 15, Subpart C 15.247 ANSI C63.10 (2020) Section 6.2 47 CFR Part 15, Subpart C 15.207 Pass Radiated Emissions which fall in the restricted bands ANSI C63.10 (2020) Section 6.10.5 & 11.12 47 CFR Part 15, Subpart C 15.205 & 15.209 Pass Radiated Spurious Emissions Below 1GHz ANSI C63.10 (2020) Section 6.4,6.5 47 CFR Part 15, Subpart C 15.205 & 15.209 Pass Radiated Spurious Emissions Above 1GHz ANSI C63.10 (2020) Section 6.6 & 11.12 47 CFR Part 15, Subpart C 15.205 & 15.209 Pass Maximum Conducted Output Power ANSI C63.10 (2020) Section 11.9.2 47 CFR Part 15, Subpart C 15.247(b)(3) Pass Minimum 6dB Bandwidth ANSI C63.10 (2020) Section 11.8.1 47 CFR Part 15, Subpart C 15.247a(2) Pass Power Spectral Density ANSI C63.10 (2020) Section 11.10.3 47 CFR Part 15, Subpart C 15.247(e) Pass Conducted Band Edges Measurement ANSI C63.10 (2020) Section 6.10.4 47 CFR Part 15, Subpart C 15.247(d) Pass Conducted Spurious Emissions ANSI C63.10 (2020) Section 11.11 47 CFR Part 15, Subpart C 15.247(d) Pass Report No.: KSCR260300068101 Page: 4 of 101 TRF No. CONN_001 A_Jun 1st ,2026 3 Contents Page 1 COVER PAGE ........................................................................................................................................... 1 2 Test Summary ......................................................................................................................................... 3 3 Contents ................................................................................................................................................... 4 4 General Information ................................................................................................................................ 5 4.1 Details of E.U.T. ............................................................................................................................... 5 4.2 Power level setting using in test ....................................................................................................... 5 4.3 Description of Support Units ............................................................................................................ 5 4.4 Measurement Uncertainty ................................................................................................................ 6 4.5 Test Location .................................................................................................................................... 7 4.6 Test Facility ...................................................................................................................................... 7 4.7 Deviation from Standards ................................................................................................................. 7 4.8 Abnormalities from Standard Conditions .......................................................................................... 7 5 Equipment List ........................................................................................................................................ 8 6 Radio Spectrum Technical Requirement .............................................................................................. 9 6.1 Antenna Requirement ...................................................................................................................... 9 7 Radio Spectrum Matter Test Results .................................................................................................. 10 7.1 Conducted Emissions at AC Power Line (150kHz-30MHz) ........................................................... 10 7.2 Radiated Emissions which fall in the restricted bands ................................................................... 14 7.3 Radiated Spurious Emissions Below 1GHz ................................................................................... 33 7.4 Radiated Spurious Emissions Above 1GHz ................................................................................... 38 7.5 Maximum Conducted Output Power .............................................................................................. 52 7.6 Minimum 6dB Bandwidth................................................................................................................ 54 7.7 Power Spectral Density ..........…

Text truncated - open the document above for the full version.

广州市高科中实通信技术有限公司 GaokeAntCo.,Ltd. 第1页共10页 产品规格承认书 SpecificationForApproval 客户名称： Customer 合肥影炬创新技术有限公司 供应商： Supplier 广州市高科中实通信技术有限公司 客户料号： CustomerP/N 产品名称： ProductionName 2.4G内置天线 产品型号： ProductionNumber GKZS-2.4G-F0235-RF0.81I4-40 供应商确认盖章(SupplierSignature) 工程师Engineer审核Checkedby批准Approvedby 周胤韬谢倩菊胡泽伟 2025年07月04日2025年07月04日2025年07月04日 客户确认盖章(CustomerSignature) 工程师Engineer审核Checkedby批准Approvedby 年月日年月日年月日 注：客户确认盖章后，请将此承认书回传到我公司。 Gaoke Ant Co., Ltd. No. 22, Shengang Guangcong South Road, Conghua District, Guangzhou, Guangdong Province, China Tel:020-87080630/87080639/87080632 Fax:020-87080731 http://www.gkzs.com.cn 广州市高科中实通信技术有限公司 GaokeAntCo.,Ltd. 第2页共10页 变更履历表 DescriptionRecord 版本 Version 修改内容 ContentRevised 创建者 Modifier 日期 Date A/0初始新建胡梅娇2025.07.04 广州市高科中实通信技术有限公司 GaokeAntCo.,Ltd. 第3页共10页 一、产品结构图纸（mm） 标记位置更 改 内 容 版本 签名/日期 图样名称 表面处理 第三视角： 审 核 工 艺 标准化 批 准 产品型号 比例 图样编号 单位 版本页次 材 料 重 量 设 计 广州市高科中实通信技术有限公司 1/1A0 2.4G内置天线 GKZS-2.4G-F0235-RF0.81I4-40 混合 GK-F0235-A0 11.8 ±0.5 2 2 . 1 ± 0 . 5 4 0 ± 5 RF1.13线 黑色 IPEX头 四代 FPC 二、产品实物图 广州市高科中实通信技术有限公司 GaokeAntCo.,Ltd. 第4页共10页 三、天线技术参数 DesignSpecificationsTypical Antenna TypeFPC板内置天线 工作频率(workingFrequency) 2400-2500MHz 增益（Gain）1.81dBi（平均）、2.39dBi（峰值） 天线效率（Antennaefficiency）≥30% 电压驻波比 （VSWR）≤2.5 极化方式(Ploriaztion)线极化 辐射方向(Radiationpattern)全向 馈电阻抗(impedance)50Ω 功率容量(Powerhandling) 33dBm 天线接口(Interface)IPEX（四代）/RF0.81线（黑色）线长40mm 天线尺寸(Overaldimensions) 11.8x22.1mm 重量(Weight) 0.3g 工作温度(OperatinTemp)-40~80°C 广州市高科中实通信技术有限公司 GaokeAntCo.,Ltd. 第5页共10页 四、RF0.81线规格 1.产品描述 1.1适用于TeflonFEP绝缘系列柔软同轴电缆线。 产品特征：极好的柔软性，低驻波比，良好的屏蔽性能，精确的相位匹配。 在微波设备、无线通信设备系统和设备都有使用。 1.2品名:同轴线缆; 1.3型号:RF0.81/TC; 1.4规格:7/0.05SPC; 使用特性: 特性阻抗:50Ω 工作温度:-65°C---+200°C 工作湿度:＜90% 最小弯曲半径：5mm 2.电缆详细资料及结构图: 2.1结构图: 绝缘 内导体 外导体 护套 2.2电缆材质及尺寸: 项目单位材质及尺寸 内导体 材质/镀银铜线 根数/直径根/mm7/0.05±0.02 外径mmΦ0.15 绝缘 材质/TeflonFEP(聚全氟乙烯-丙烯树脂) 厚度mm0.13 完成外径mmΦ0.41±0.03 外导体 材质/镀锡铜线 形式/编织 构成/3*16/0.05mm 密度%≥93%(24目) 完成外径mmΦ0.63±0.05(仅供参考) 护套 材质/TeflonFEP(聚全氟乙烯-丙烯树脂) 厚度mm0.09 完成外径mmΦ0.81±0.05 广州市高科中实通信技术有限公司 GaokeAntCo.,Ltd. 第6页共10页 护套颜色/灰色和黑色(也可按客户要求) 3.电缆特性 3.1机械及物理特性: 项目标准要求测试方法备注说明 内导体拉伸率≥20%GB4909 =（L1-L0）/L0×100% L1最终标距长度 L0原始标距长度 绝缘外观光滑/良好目测 绝缘材质比重2.14-2.19/根据材料特性 绝缘介电常数2.1×10 6 HZ/根据材料特性 护套外观光滑/良好目测/ 3.2电气性能 测试项目标准要求参照标准测试方法备注 绝缘电阻≥10MΩ.KmGB3048 500V交流 电持续 1min 电阻测试仪 最大承受压力8000N/// 介质耐压0.8KVGB3048 1KV交流电 持续1min 耐压测试仪 工作电压300VGB3048// 特性阻抗50±2ΩGB4098/ 网析分析仪、TRK测 试仪 电容96.65PF/MGB4098/数字电容仪 传输速率70%//网析分析仪 传输延迟4．8ns/m/// 最大工作频率1GHZ/// 屏蔽率减100dB/GB9023/ 阻燃性passedIEC332-3// 卤素特性passedICE754// 屏蔽衰减（db/m） 测试频率衰减 1000MHZ3.6 2000MHZ5.1 3000MHZ6.2 4000MHZ7.5 5000MHZ8.5 6000MHZ9.4 驻波比6000MHZ以下≤1.50GB9023/ 广州市高科中实通信技术有限公司 GaokeAntCo.,Ltd. 第7页共10页 五、IPEX头(四代)规格 广州市高科中实通信技术有限公司 GaokeAntCo.,Ltd. 第8页共10页 六、天线性能测试(配样机测试) 1 、驻波比 2 、回波损耗图 广州市高科中实通信技术有限公司 GaokeAntCo.,Ltd. 第9页共10页 2 、方向图（ 2D 及 3D 图） 4.效率曲线图 5 、增益曲线图

Building H, Hongyongli Industrial Zone, Shabeili, Baolong Subdistrict, Longgang District, Shenzhen, China 第 1 页 共 6 页 FAX：0755-28483275 规 格 书 客户名称： 客户料号： 科信料号： 规格描述：2.4G黄膜软内置/RG1.13线/L=7CM/1代IPEX 制作日期：2025年3月31日 出厂确认： 部 门 审 核 批 准 射频部 刘景雄 李斌 结构部 谢东展 李斌 品质部 王飞 李斌 客户确认： 检 查 审 核 批 准 Building H, Hongyongli Industrial Zone, Shabeili, Baolong Subdistrict, Longgang District, Shenzhen, China 第 2 页 共 6 页 FAX：0755-28483275 1. 产品图片： Building H, Hongyongli Industrial Zone, Shabeili, Baolong Subdistrict, Longgang District, Shenzhen, China 第 3 页 共 6 页 FAX：0755-28483275 2. 电气性能测试报告, VSWR： Building H, Hongyongli Industrial Zone, Shabeili, Baolong Subdistrict, Longgang District, Shenzhen, China 第 4 页 共 6 页 FAX：0755-28483275 3. 产品性能参数： 电性能指标Electrical Specifications 频率范围Frequency Range (MHz) 2400-2500 输入阻抗Input Impendence (Ω) 50 电压驻波比V.S.W.R ≤2.0 （未匹配设备，仅供参考） 增益Gain (dBi) 3.0（未匹配设备，仅供参考） 极化形式Polarization Type 垂直Vertical 机械指标Mechanical Specifications 天线材质Material FPC 连接器型号Connect Type IPEX(1代) 天线尺寸Size 19*22*0.25mm 工作温度Operating Temp -20 ~ +65 ̊C Building H, Hongyongli Industrial Zone, Shabeili, Baolong Subdistrict, Longgang District, Shenzhen, China 第 5 页 共 6 页 FAX：0755-28483275 Building H, Hongyongli Industrial Zone, Shabeili, Baolong Subdistrict, Longgang District, Shenzhen, China 第 6 页 共 6 页 FAX：0755-28483275

Report No.: SUCR260300029001 Page: 1 of 38 This document is issued by the Company subject to its General Conditions of Service printed overleaf, available on request or accessible at http://www.sgs.com/en/Terms-and-Conditions and, for electronic format documents, subject to Terms and Conditions for Electronic Documents at http://www.sgs.com/en/Terms-and-Conditions/Terms-e-Document. Attention is drawn to the limitation of liability, indemnification and jurisdiction issues defined therein. Any holder of this document is advised that information contained hereon reflects the Company’s findings at the time of its intervention only and within the limits of Client’s instructions, if any. The Company’s sole responsibility is to its Client and this document does not exonerate parties to a transaction from exercising all their rights and obligations under the transaction documents. This document cannot be reproduced except in full, without prior written approval of the Company. Any unauthorized alteration, forgery or falsification of the content or appearance of this document is unlawful and offenders may be prosecuted to the fullest extent of the law. Unless otherwise stated the results shown in this test report refer only to the sample(s) tested and such sample(s) are retained for 30 days only. Attention: To check the authenticity of testing / inspection report & certificate, please contact us at telephone:(86-755) 8307 1443, or email: [email protected] SAR TEST REPORT Application No.: SUCR2603000290AT Applicant: Inlumen Technologies Co., Ltd. Address of Applicant: Room 806, A1, Phase 3, Innovation Industrial Park,High-tech Zone, Hefei City, Anhui Province, China. Manufacturer: Inlumen Technologies Co., Ltd. Address of Manufacturer: Room 806, A1, Phase 3, Innovation Industrial Park,High-tech Zone, Hefei City, Anhui Province, China. EUT Description: Mate Series Thermal Imaging Attachment Model No.: MATE ULTRA S60R Trade Mark: Nocpix FCC ID: 2BHFB-4071-00 Standards: FCC 47CFR §2.1093 Date of Receipt: 2026-03-30 Date of Test: 2026-05-12 Date of Issue: 2026-05-29 Test Result : PASS * * In the configuration tested, the EUT detailed in this report complied with the standards specified above. Report No.: SUCR260300029001 Page: 2 of 38 Revision Record Version Description Date Remark 00 Original 2026-05-29 / Authorized for issue by: Prepared By Leon Liu/ Project Engineer Approved By Nick Hu/ Reviewer Report No.: SUCR260300029001 Page: 3 of 38 TEST SUMMARY Frequency Band Maximum Reported SAR(W/kg) Body 0mm WI-FI (2.4GHz) 0.42 Zigbee 0.20 Sum. 0.61 SAR Limited(W/kg) 1.6 Report No.: SUCR260300029001 Page: 4 of 38 Contents 1 General Information ........................................................................................................ 5 1.1 General Description of EUT ........................................................................................ 5 1.2 Test Specification ....................................................................................................... 6 1.3 RF exposure limits ...................................................................................................... 7 1.4 Test Location .............................................................................................................. 8 1.5 Test Engineer ............................................................................................................. 8 1.6 Test Facility ................................................................................................................ 8 2 Laboratory Environment ................................................................................................. 9 3 SAR Measurements System Configuration ................................................................. 10 3.1 The SAR Measurement System ................................................................................ 10 3.2 Isotropic E-field Probe EX3DV4 ................................................................................ 12 3.3 Data Acquisition Electronics (DAE) ........................................................................... 13 3.4 SAM Twin Phantom .................................................................................................. 13 3.5 ELI Phantom ............................................................................................................. 14 3.6 Device Holder for Transmitters ................................................................................. 15 3.7 Measurement Procedure .......................................................................................... 16 4 SAR measurement variability and uncertainty ............................................................ 20 4.1 SAR measurement variability .................................................................................... 20 4.2 SAR measurement uncertainty ................................................................................. 20 5 Description of Test Position ......................................................................................... 21 5.1 Front-of-face device of Still cameras and video cameras .......................................... 21 6 SAR System Verification Procedure ............................................................................ 22 6.1 Tissue Simulate Liquid .............................................................................................. 22 6.2 SAR System Check .................................................................................................. 24 7 Test Configuration ......................................................................................................... 27 7.1 WIFI Test Configuration ............................................................................................ 27 7.2 Zigbee Test Configuration ......................................................................................... 31 8 Test Result ...................................…

Text truncated - open the document above for the full version.

` ReportNo.:SUCR260300029001 Page:1of21 AppendixC Calibrationcertificate 1.Dipole D2450V2-SN922 2.DAE DAE4-SN 1374 3.…

Text truncated - open the document above for the full version.